survce version 5 - wa precision surveys · • carlson rx5 • foif a30 • champion wr1 •...

New Features

• Carlson CR+ (including Onboard)

• Geomax Zoom 90

• Geomax Zipp 20

• Carlson BRx6

• Carlson Rx5

• Foif A30

• Champion WR1

• Champion TK2

• Sokkia GCX2

• CHC i80

• Geomax Zoom 35

• Geomax Zenith 35

• Champion WR1

• HiTarget V100

• South Galaxy G1

• EFT M2 and GH1

• Hemisphere S321

• Altus APS3G

• Satlab SLD100 Depth Sounder

• Spectra Precision SP60

• Fennel GNSS

• Carlson Surveyor2 Differential Corrections

New Drivers Supported

New and Improved Registration Process

• Easy registration in the field using a Smartphone, or directly from your data collector

• Improved interface allows changing email address in the field for software updates.

New Look for SurvPC

• Updated icons throughout software

• New higher resolution feature code symbols

Long Point-Ids’ and Descriptions supported (up to 255 digits). New .crdb files

Mission Planning in the Field

• Download ephemeris data from the internet or from some receivers.

• Predefine obstructions

Multiple Occupation Intersection

User Controlled Coding Style

NONE

CLASSIC

ONE TOUC H (New!)

One Touch Feature Coding The survey speed of one-touch feature codes

with full field-to-finish flexibility.

Multi-Targets • Save antenna heights and easily

switch between them.

• User customizable names, heights, and target types for total station.

Use the new 1-Shot button to take one quick reading at your new height, and then revert automatically to the old one.

º

r¡

Tilted Pole Measurement

• Industry leading icons in top bar let users know the state of the sensors during survey routines.

• Automatically adjust the ground position to account for tilt.

• Automatically fallback to tolerance requirements when interference is detected.

• Motion Filter to improve the quality of sensor readings that waits for the unit is static

One Point Test Simple test utility to help

users feel comfortable with tilted pole measurement, and learn the limitations of their receiver.

Auto Store When Level

Automatically store a point as soon as you level up!

Edit Centerline – FIT Arc-Spiral

• SurvCE now allows fitting curves and spirals to centerlines defined by PI points

Control Points in Map

• Points from control file can be selectable in Stakeout and COGO graphics

Point Layers

• Assign customized layers to points

Auto Scan for Total Station

Define your perimeter, breaklines, and baseline, and … then go eat a sandwich while the total station does your survey!

Auto Scan for Total Station

Two modes:

Topo – for road work, or flat horizontal surfaces

Scan – For building faces, mine walls, etc.

Auto Scan for Total Station

UTM Zone Selection Made Easier

• Avoid scrolling through the huge list.

• Four easy ways to find your UTM zone.

NAD83 Zone Selection Made Easier

• Easy selection by state

• Select based on your current position.

Manual Data Transfer • One-stop-shop for

moving files • Simple and intuitive

design moves files left to right

• Avoid complicated windows explorer interface

Antenna Database Update

• Now defaulting to Absolute offset

• Interface is now more clear and shows source of antenna.

• All antennas come from NGS database when available.

Carlson Connect

• New RTK Service offered by Carlson

• Allows easy direct IP modem connect between base and rover.

• One base, multiple rovers

Other New Features • Duplicate reading notification

• Improved memory management means bigger files, faster

• KML Export of Linework

• Restore Occupation moved to new, handy location

• Now reading Esri Prj files for projections

• More options for controlling tracking state after reading

• Fast Scale Magnification

• JXL Export from SurvCE

• Output NMEA stream when connected to Robotic Total Station

• GeoPDF

• Geotrans Projections now supported (special feature, inquire for more info)