swep b35the b35 is ideal for many applications in district heating, heat recovery, combined heat and...
Post on 06-Feb-2021
3 Views
Preview:
TRANSCRIPT
-
Size Height of plate pack Total weight
The B35 is ideal for many applications in district heating, heat recovery, combined heat and power, and engine oil and transmission oil cooling. It is the perfect choice for efficient heat transfer with a low pressure drop in systems with up to 2″ piping and 27 m³/h (118.8 gpm) water flow.
Connections*
*For specific dimensions, or information about other types of connections, please contact your SWEP sales representative.
Externally threaded
Internally threaded
Soldering FlangesDIN/DNC
Internally threadedhexagonal exterior
Materials Channel plate Brazing
SC Stainless steel Copper
Victaulic
Pressure classesS Standard, evaluated per EN 13345.
Max number of plates (NoP) Port size F1/P1 Port size F2/P2 Port size F3/P3 Port size F4/P4 Max volume flow Channel volume (SI) Channel volume (US)
www.swep.net
CH
ALL
EN
GE
EFF
ICIE
NC
YSWEP B35
25042 mm (1.654 in)42 mm (1.654 in)42 mm (1.654 in)42 mm (1.654 in)
27,4 m³/h (120.6 gpm)0,179 dm3
0.00632 ft3
PED
550570590610630650670690
(PSI)
-320.8 400 (°F)
UL
43
44
45
46(bar)
-196 204 (°C)
435
455
475
495
515
535
555
575
-320.8 68 122 212 275 302 347 392 437
(PSI)
3031323334353637383940
-196 20 50 100 135 150 175 200 225
(bar)PED Circuit 1&2
(°C)(°F)
25
27
29
31
33
35
37
-196 20 50 100 135 150 175 200 225
(bar)
(°C)
PED
360
385
410
435
460
485
510
535
-320.8 68 122 212 275 302 347 392 437
(PSI)
(°F)
2526272829303132
-196 250
(bar)
(°C)
ASME
360
380
400
420
440
460
-40 302
(PSI)
(°F)
SC S 8+(2,34×NoP) mm 5,90+(0,34×NoP) kg
0.315+(0.092×NoP) in 13.02+(0.75×NoP) lb
393 (
15.47
)
324 (
12.76
)
243 (9.57)
174 (6.85)
-
Third party approvalsSWEP BPHEs are generally approved by listed below certifi cation organizations:Europe, Pressure Equipment Directive (PED)America, Underwriters Laboratories Inc (UL)Japan, Kouatsu-Gas Hoan Kyoukai (KHK)Additionally SWEP holds approvals from a vast variety of other certifi cation organizations. For approval information regarding a specifi c product please contact your local SWEP representative. SWEP reserves the right to make changes without prior notice.
The BPHE conceptThe Brazed Plate Heat Exchanger (BPHE) is constructed as a plate package of corrugated channel plates with a fi ller material between each plate. During the vacuumbrazing process, the fi ller material forms a brazed joint at every contact point between the plates, creating complex channels. The BPHE allows media at different temperatures to come into close proximity, separated only by channel plates that enable heat from one media to be transferred to the other with very high effi ciency. The concept is similar to other plate and frame technology, but without the gaskets and frame parts.
Cover platePlate package
Connections
Cover plateChannel plates
Zero hole channel plate
SSP calculation softwareWith SWEP’s unique SSP, the SWEP Software Package, you can do advanced heat transfer calculations yourself, and choose the product solution that suits your application best. It’s also easy to choose connections and generate drawings of the complete product. If you would like advice, or you would like to discuss different product solutions, SWEP offers all the service and support your need.
Material disclaimerThe information and recommendations in regards to the products are presented in good faith, however, SWEP makes no representations or warranties as to the completeness or accuracy of the information. Information is supplied upon the condition that the purchasers will make their own determination as to the products’ suitability for their purposes prior to use. Purchasers should note that the properties of the products are both application and material selection dependent and that products containing stainless steel are still subject to corrosion if used in unsuitable environments.
www.swep.net
CH
ALL
EN
GE
EFF
ICIE
NC
YSWEP B35
UL
550570590610630650670690
(PSI)
-320.8 400 (°F)
UL
43
44
45
46(bar)
-196 204 (°C)
435
455
475
495
515
535
555
575
-320.8 68 122 212 275 302 347 392 437
(PSI)
3031323334353637383940
-196 20 50 100 135 150 175 200 225
(bar)PED Circuit 1&2
(°C)(°F)
25
27
29
31
33
35
37
-196 20 50 100 135 150 175 200 225
(bar)
(°C)
PED
360
385
410
435
460
485
510
535
-320.8 68 122 212 275 302 347 392 437
(PSI)
(°F)
2526272829303132
-196 250
(bar)
(°C)
ASME
360
380
400
420
440
460
-40 302
(PSI)
(°F)
ASME
550570590610630650670690
(PSI)
-320.8 400 (°F)
UL
43
44
45
46(bar)
-196 204 (°C)
435
455
475
495
515
535
555
575
-320.8 68 122 212 275 302 347 392 437
(PSI)
3031323334353637383940
-196 20 50 100 135 150 175 200 225
(bar)PED Circuit 1&2
(°C)(°F)
25
27
29
31
33
35
37
-196 20 50 100 135 150 175 200 225
(bar)
(°C)
PED
360
385
410
435
460
485
510
535
-320.8 68 122 212 275 302 347 392 437
(PSI)
(°F)
2526272829303132
-196 250
(bar)
(°C)
ASME
360
380
400
420
440
460
-40 302
(PSI)
(°F)
top related