system tiling brochure
Post on 03-Jan-2016
94 Views
Preview:
DESCRIPTION
TRANSCRIPT
P R E M I U M P E R F O R M A N C E
TILE ADHESIVES
TILE GROUTS
FLOORLEVELLINGAND SCREEDS
TILING RENDER
WATERPROOFCOATINGS
NATURAL STONE
PRODUCTSELECTORGUIDE
TILING SYSTEMDIAGRAMS
June 2010Product Selector
CI/SfB
Y43
FOR OVER 50 YEARS ARDEX has been
synonymous with the development, manufacture
and marketing of premium quality specialist
construction materials for the flooring, tiling and
rendering industries. ARDEX consistently meets all
requirements of the market, especially the needs
of contractors, specifiers and distributors for
reliable, user friendly products which makes
ARDEX the worldwide leader for tile adhesives and
grouts, sub-floor smoothing compounds, industrial
toppings, floorcovering adhesives, repair mortars,
floor screeds and damp proof membranes.
This catalogue will guide you through the range of
ARDEX High Performance Tiling Products and
provides essential tiling system diagrams for your
tiling projects.
3
ARDEX tiling products are designed to work together for total
peace of mind. Each product is the result of research and
development with the help of contractors, specifiers,
manufacturers and clients to ensure product compatibility
and market leading performance.
We call this SYSTEMARDEX –
A system of high quality, compatible products
matched to unparalleled technical and field support.
Tile Adhesive Selector Chart 4
Tile Fixing and Grouting Techniques 5 - 6
Movement Joints 7
Natural Stone 8
ARDEX Product Case Studies 9 - 11
Tile Adhesives 12 - 18
Tile Grouts 18 - 21
Waterproof Coatings 22
Renders 23
Smoothing and Levelling Compounds 23 - 24
Concrete Resurfacer, Patch & Repair Mortar 25
Fast Track Floor Screeds 26 - 27
Schlüter Ditra Matting Adhesive 28
Admixes 28
Primers 29
Floor Tiling Systems 30 - 47
Wall Tiling Systems 48 - 66
Grout Selector and Coverage Table 67
Grout Colours Guide 68 - 69
The ARDEX Pool System 70 - 71
The ARDEX Wet Room System 72 - 73
British Standards 74
ARDEX Technical Services, ARDEX Online 75
P R E M I U M P E R F O R M A N C E
4
Tile Adhesive Selector Chart
SELECTING THE CORRECT ARDEX TILE ADHESIVEAR
DEX
ADHE
SIVE
S
ARDE
X D
30
ARDE
X X
7G o
rX7W
ARDE
X X
7G P
LUS
ARDE
X X
7R /
X7R
W
ARDE
X X
7G /
E90
orX7
W/E
90
ARDE
X S
16 /
E90
orS1
6W/E
90
ARDE
X S
16 o
rS16
W
ARDE
X S
21
ARDE
X S
21/E
90
ARDE
X X
78S
/ X78
WS
ARDE
X X
77 /
X77W
ARDE
X X
77S
/ X77
WS
ARDE
X X7
001
/ X70
01W
ARDE
X S
20 /
S20W
ARDE
X W
A
TILE TYPE
Ceramic/Porous Bodied ✓ ✓✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓
✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓
✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓
✓✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓
✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓
✓ ✓ ✓
✓
✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓Vitrified
Fully Vitrified/PorcelainInternal
Fully Vitrified/PorcelainExternal
Large Format Floor Tile(Fluid Bed)
Slate
Quarry Tile
Terracotta
Vitrified Mosaic
Glass Mosaic
Marble and NaturalStone Tiles
Brick Slips (External)
Check for moisture staining – consider use of Rapidry Formula adhesive or ARDEX WAFor a full explanation on the benefits of the Rapidry Formula see page 8White adhesive recommended for light coloured and translucent mosaics, marble and natural stone tilesMust be suitable for fixing with tile adhesiveOn absorbent substrates onlyMaximum tile size 300mm x 300mm
Further advice on the fixing of natural stone or marble is described in the ‘Natural Stone Fixing Guide’
4
5 5
5 5
5 5
4
✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓4
✓4 4
✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓✓4 4
✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓✓
✓ ✓ ✓ ✓ ✓ ✓
ARDE
X X
32
✓
✓
✓
✓
✓
✓
✓
✓
✓
4
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓ ✓ ✓ ✓
3
1
2
1 2
1
2
3
4
5
ARDE
X D
20
5
Tile Fixing and Grouting Techniques
Tile Fixing Techniques
The adhesive is applied to the prepared
surface with a trowel and then combed
through with a suitably sized notched
trowel in straight ribs to give a ribbed
mortar bed. The tiles should be fixed
within the open time of the applied
adhesive and pressed into place with a
twisting and sliding action to achieve the
required contact.
For tiling to walls in dry internal locations
the adhesive contact should be at least
50% of the back of the tile.
When tiling to floors and all external
locations, or in wet areas such as showers
and swimming pools, solid bed fixing
should be achieved. To achieve a solid
bed usually requires the tiles to be
buttered immediately prior to placing into
the ribbed bed so no voids are left
beneath the tiles.
The size of notched trowel chosen
depends on the tile size, the surface
being tiled, the profile on the back of the
tile and the degree of coverage required.
When fixing floor tiles, a pourable
adhesive can be used if preferred to
enable solid bedding of the tiles without
the need to butter the backs of the tiles.
For Natural Stone fixing - see page 9.
Tile Grouting Technique withCement-Based Grout
Using a rubber squeegee work the
cement-based mortar into the tile joints
ensuring they are completely filled, deep
joints can usually be filled in one
operation without the grout sagging in the
joints. When the mortar firms up in the
joints this allows for washing down to
produce a virtually flush finish, with a
smooth surface by using just a wet
sponge.
If an area is left with dried residue on the
tile face prior to cleaning, the grout
residues may, within the working time of
the grout mortar, require moistening in
order to make washing off easier.
Any dry film remaining on the tile face
after cleaning down can be easily
removed by using a damp sponge once
the mortar has hardened in the joints.
Tile Fixing and Grouting Techniques
Tile Grouting Techniquewith ARDEX WA Epoxy-Based Grout
1. First, ensure that you are ready with
the correct tools and sufficient materials.
Ensure that you have protective gloves,
ample fresh water and have read the
precautions on the containers.
Add the complete contents of the
hardener container into the container of
resin. Mix the resin and hardener together
then transfer some of the mix back to the
hardener container to disperse any
hardener not transferred initially. Transfer
this material back to the resin container
then thoroughly mix the hardener and
resin together until a uniform mortar is
produced. Mixing should be carried out
using a propeller type stirrer with a slow
speed drill which will make mixing easier
and faster. When mixed, the mortar
should be removed from the container
and spread out onto the wall or floor tiles
or an impervious surface e.g. metal plate,
to ensure the maximum working time of
the mortar by preventing self-heating in
the container.
2. Work the mortar into the dry joints
immediately after mixing, using a suitable
rubber backed squeegee, ensuring that
the joints are completely filled.
N.B. Some porous and matt finished tiles
are prone to surface absorption of epoxy
resin. To avoid shading variations apply
the mortar over the entire tile surface.
3. The use of a good rubber backed
trowel/squeegee removes virtually all
surplus material from the surface of the
tiles and will make cleaning easier.
4. Mist spray
water onto the
wall tile surface
prior to emulsifying
the grout residues.
5. Cleaning the residues from the surface
of the tiles should proceed as soon after
application as possible. Use a
Scotchbrite® pad and a little water,
working in circular movements to emulsify
the residues on the tile surface whilst
applying gentle pressure. Blue pads
should be used for cleaning ARDEX WA
grey and white pads for ARDEX WA white.
N.B. If the Scotchbrite® pad is pressed
too hard onto the tiled surface, more
mortar will be removed from the joints.
Take care to ensure that empty joints are
kept dry and not accidentally filled with
emulsified material.
6. Smooth the joint surface by gently
wiping along the joint surface with a moist
sponge to obtain a satisfactory finish.
Carefully remove the emulsified material
from the surface of the tiles with a
squeezed out sponge, wiping with each
face once before rinsing again in clear
water. Water should be changed on a
regular basis. A square cut sponge wiped
diagonally across the surface of the tiles
will leave the joints as flush as possible.
Slowly wipe across to allow the sponge
time to absorb the slurry as it passes over
the tiled surface.
7. Note: Once the cleaning has been
completed, the joints should be allowed to
harden sufficiently before a final clean
down to remove any residual film which
may remain after wiping with a sponge.
The use of a Scotchbrite® pad and water
will remove this film, this final cleaning
should be carried out within 24 hours of
application.
6
Step 1
Step 2
Step 3
Step 4
Step 5
Step 6
Finish
7
Movement Joints
Movement JointsThe incorporation of movement joints is an important part of aceramic floor or wall tiling project and should be detailed at thecommencement of work. Movement joints are incorporated toaccommodate moisture or thermal movement and dryingshrinkage of the background or substrate to be tiled. Detailedadvice is given in the relevant sections of BS 5385 parts 1, 2and 3, extracts of which are given here.
Internal Wall TilingBS 5385-1 : 20096.5 Movement Joints6.5.1 – GeneralConsideration should be given at the design stage to theprovision of movement joints; the type and location ofmovement joints involve considerations of constructionmaterials, bedding systems, anticipated temperature andhumidity conditions, areas concerned and the setting out of thetiling.
Note: Stresses occur in the tiled installation as a result ofbackground movement due to such factors as drying shrinkageand moisture and thermal changes. These stresses cansometimes cause loss of adhesion, bulging or cracking of thetiling, but can be localised by incorporating movement joints.
Where the background is mature and stable, e.g. existingrendering or plaster, the movement joints in the tiling, whichare not to be confused with structural movement joints, mightneed to extend only through the tiling and its bed, and shouldbe a minimum of 6mm wide.
Materials for movement joints should conform to 5.9.
6.5.2 – LocationMovement joints should be located in the tiled installation tocoincide and be continuous with all existing structuralmovement joints, although they are actually formed as separatejoints isolated by suitable thicknesses of back-up material.
The movement joints should be able to accommodate expectedmovement and when detailing the location of movement jointsin tiling, the designer normally specifies that they arepositioned in the following locations.a) Over existing and/or structural movement joints;b) Where tiling abuts other materials;c) Where tiling is continuous across junctions of
different background materials;d) In large tiled areas, at internal vertical corners
and at 3m to 4.5m centres horizontally and vertically;
e) Where stresses are likely to be concentrated, for example at changes of alignment.
Where large degrees of thermal movement or vibration areexpected, the frequency of movement joints should beincreased to accommodate the movement.
Movement joints in the tiling should be of a suitable width topermit the sealant to accommodate the expected structuralmovement.
Conversely, in small tiled areas in normal conditions,intermediate joints should not be necessary on walls up to 6mlong provided the background is strong and dimensionallystable, there is adequate compressible joint width around eachtile and movement joints are included at internal angles.
External Wall TilingBS 5385-2 : 200610 Movement Joints10.1 – GeneralConsideration should be given at the design stage to theprovision of movement joints. The type and location ofmovement joints are influenced by considerations ofconstruction, materials, bedding systems, anticipatedtemperature and humidity conditions, areas involved and thesetting out of the tiling.
Sealants and back-up materials for movement joints should bein accordance with 5.9.
Note: Stresses occur in the tiled installation as a result ofmovement due to such factors as drying shrinkage andmoisture, thermal changes and creep. These stresses cancause loss of adhesion, bulging or cracking of the tiling butthey can be localised by incorporating movement joints.
10.2 – LocationMovement joints should be located in the tiled installation tocoincide and be continuous with all existing structuralmovement joints, although they are isolated by suitablethicknesses of back-up material.
Where tiles are fixed to an intermediate substrate, themovement joint should extend through the intermediatesubstrate.
Where backgrounds are mature and stable, the movementjoints in the tiling, which are not to be confused with structuralmovement joints, should extend only through the tiling and itsbed, and should be a minimum of 6mm wide.
10.3 – Disposition and FormingWhen detailing the disposition of movement joints, the designershould consider the following locations in relation to their effecton the setting out of the tiling:a) Over existing and/or structural movement joints;b) Where tiling abuts other materials;c) Junctions between different background materials, where
tiling is continuous across them;d) Storey heights horizontally and approximately 3m to 4.5m
apart vertically; ideally, they should be located over movement joints in the structural background and at structural material changes; for example, horizontal joint at top and bottom of floor slab, vertical joint at internal corners and at junctions with columns;
e) External angles, vertically between 0.25m and 1m from the angle and symmetrically wherever possible.
Where movement joints in tiling occur over movement joints inthe background, they should coincide and be continuous withthese joints and should be of a suitable width to permit thesealant to accommodate the expected movement.
Interior and Exterior Floor TilingBS 5385-3 : 20076.8 Movement Joints6.8.1 – Types of movement joints6.8.1.1 – GeneralStresses can result from factors such as drying shrinkage,deflection and moisture movements in the base and thermaland moisture changes affecting the flooring. These stressescan sometimes cause loss of adhesion and bulging or crackingof the flooring. To counteract this, movement joints extendingthrough the tiling and its bed should be incorporated in theinstallation.
The building designer should assess the magnitude of anystresses and decide where movement joints should be located,having regard to all the relevant factors including the type offlooring and bed.
Movement joints for the floor tiling are as follows:a) Flexible joints aligned to structural movement joints;b) Flexible joints to accommodate smaller movements than
structural joints.
Note: For movement joints in special conditions refer toBS 5385-4.
6.8.1.2 – Structural movement jointsStructural movement joints in the bed and tiling should be sitedimmediately over and be continuous with structural movementjoints in the base. This procedure might not be acceptable ifthe base joints are not straight and parallel, or if their layoutdoes not coincide with that of the floor tiles; in thesecircumstances, guidance should be sought from the buildingdesigner or engineer.
6.8.1.3 – Other movement jointsFlexible joints should be inserted over supporting walls andbeams at intermediate positions to accommodate deflection ofthe base and movements in the flooring.
Flexible joints should be used at floor perimeters and to dividethe floor into bays at the intervals recommended in 7.1.6.4.Wherever possible they should coincide with structural features,e.g. columns and door openings, or they can be planned toprovide a decorative panelled effect.
Where high temperatures are expected, for instance aroundboilers, over heating installations or from strong sunlight, anassessment of the likely temperature range and correspondinglinear changes in the flooring should be made to determinewhether and where any additional allowance for movement isnecessary.
In floors that have to withstand hard-rimmed wheel traffic orthe dragging of heavy loads, the position of movement jointsshould, where possible, be planned so that they do not occur inthe traffic area. Where this is not practicable the joints shouldbe of types having their edges reinforced with metal or rigidplastic sections.
Joints other than those protected by metal or rigid plasticsedging, subject to traffic heavier than light pedestrian, shouldnot be wider than 10mm. Information on the permissiblemaximum and minimum joint widths should be obtained fromthe manufacturer of the particular joint filling selected.
7.1.6 – Movement joints7.1.6.1 – GeneralCare should be taken to ensure that levelling screeds or tilebeds adjacent to movement joints are fully compacted.
Movement joint cavities should extend through the tiling, tilebed and levelling screed and should be completely filled andsealed after the grouting of the normal joints. Where separatinglayers are incorporated, however, the movement joint shouldextend to this layer but should not penetrate it. Prior to thefilling and sealing operation, the joints should be thoroughlycleaned of all extraneous matter, excess grout, dust, etc.
7.1.6.2 – Structural movement jointsMovement joints should be inserted in the bed and tiles overmovement joints and/or contraction joints in the base. Theyshould be continuous with the base joints and should be ofsufficient width to permit the joint filling to accommodate theexpected movement. In the event of the base joints not beingtrue, e.g. not straight and parallel, or their layout not coincidingwith that of the tiles, the siting of the movement joints in thefinish as stated might not be acceptable and a decision as toany alternative procedure should be obtained from the buildingdesigner or engineer or their agent.
7.1.6.3 – Perimeter jointsMovement joints should be inserted where the tiling abutsrestraining surfaces such as perimeter walls, columns, curbs,steps and plant fixed to the base. In floors with dimensions of2m or less between restraining surfaces, perimeter joints arenot necessary unless the conditions that can generate stressesare likely to be extreme, for example, violent temperaturechanges or prolonged immersion in liquid.
7.1.6.4 – Intermediate jointsThe need for intermediate joints between perimeter jointsdepends on the dimensions of the floor; for example, with theexception of those on suspended construction, in floors withless than 10m between perimeter joints no intermediate jointsare necessary but in larger floors should be employed to dividethe area into bays of size not greater than 10m x 10m.
On suspended floors, stress-relieving joints should be insertedwhere flexing is likely to occur, e.g. over supporting walls orbeams.
For floors which might be subjected to significant thermalchanges, i.e. direct sunlight in atria, or underfloor heating, etc.,the floor area should be divided up by movement joints intobays of size not greater than 40m2 with an edge length notgreater than 8m.
8
Natural Stone
ARDEX Natural Stone Systems with ‘Rapidry Formula’ technology for the complete solution:
FLOOR PREPARATION
ARDEX K 15-HB Pump or hand applied levelling mortar which can be tiled on in 3-4 hours.
ARDEX A 35 Rapid hardening and drying cement for floor screeds, which can be tiled on 24 hours after application.
ARDEX A 35 MIX Unique rapid drying pre-blended screeding and screed repair mortar which can be tiled on24 hours after application.
ADHESIVES
ARDEX S16 Grey rapid hardening and drying wall and floor natural stone tile adhesive for internal use in dry or intermittently damp locations. Can be trafficked and grouted 2-3 hours after fixing.
ARDEX S16W White rapid hardening and drying wall and floor natural stone tile adhesive for internal use in dry or intermittently damp locations. Ideal for fixing translucent marble, glass mosaics and light coloured natural stone tiles. Can be trafficked and grouted 2-3 hours after fixing.
ARDEX X 7001/X 7001 W Grey or white rapid hardening and drying, flexible floor tile adhesive for fixing natural stone tiles to most surfaces GREY or WHITE including wood-based sheets and boards. Natural stone tiles can be grouted and trafficked 2 hours after fixing.
ARDEX S 20/S 20 W Rapid drying and hardening natural stone tile adhesive for bed thickness between 5mm and 20mm.GREY or WHITE Can be trafficked and grouted 3 hours after fixing, ideal for uncalibrated natural stone tiles.
ARDEX X 32 Rapid hardening and drying white natural stone adhesive. Use for uncalibrated stone for internal and external areas. Adhesive bed between 3-30mm. Ideal for moisture sensitive stone. Grout after 3 hours.
GROUT
ARDEX MG Rapid drying marble and natural stone tile grout. Ideal for grouting natural stone tiles, virtually eliminates the risk of water staining to the tile edges. Walkable after only 90 minutes.
Fixing Natural Stone Tiles
When fixing and grouting natural stonewall or floor tiles that are prone to waterstaining, reference should be made to theuse of the 'Rapidry Formula' range ofproducts as described in the table below.
The ARDEX natural stone range isdesigned to work together as anintegrated system solution for totalpeace of mind. Each ARDEX naturalstone product is the result of continuousresearch and development, with thehelp of natural stone tile manufacturersand fixers, to ensure product compatibilityand market leading performance,courtesy of the innovativeARDEX Rapidry Formula technology.
The 'Rapidry Formula' system binds themix water within the adhesive or groutvirtually eliminating the risk of waterstaining and guaranteeing the bestpossible finish to all natural stone tileapplications. The added benefits of rapiddrying and rapid hardening make the fullrange of products ideal for the demandsof working environments when downtimeneeds to be minimised.
ARDEX Rapidry Plus has all the benefitsof Rapidry but can also be used forexternal applications.
Moisture sensitive natural stone tiles groutedwith a traditional cement-based grout, resultingin unsightly water staining at the tile edges.
Moisture sensitive natural stone tiles groutedwith ARDEX MG Rapid Drying Marble andNatural Stone Grout. ARDEX ‘Rapidry Formula’technology locks the mix water into the grout,eliminating water staining at the tile edges.
ARDEX Product Case Studies
9
Haverhill Leisure CentreSuffolk, UK Contractor: Cottrell Brickwork Ceramics Ltd of Ipswich Products used: ARDEX X 7 R, ARDEX-FLEX FL
Lark Hill VillageNottingham, UK Contractor: Telling (Finishings) Ltd of Mansfield
Products used: ARDEX K301, ARDEX X 7 R, ARDEX-FLEX FL
Tonbridge School Centre for Sports & MediaTonbridge, Kent, UK Contractor: Cerface Limited
Products used: ARDEX X 7 R, ARDEX WPC, ARDEX-FLEX FL, ARDEX X 7 G PLUS, ARDEX WA
10
ARDEX Product Case Studies
HarrodsLondon, UK Contractor: BTM Marble & Granite and BTM Trading Ltd of Wembley Products used: ARDEX SD-T B, ARDEX X 7 R
St David's Shopping CentreCardiff, UK Contractor: Stone Cladding International Limited of Newton Abbot Products used: ARDEX X 7001 W
11
ARDEX Product Case Studies
Cambridge Regional CollegeCambridge, UK Contractor: Neofloors of Kimbolton Products used: ARDEX K 15-B, ARDEX X 78 S, ARDEX-FLEX FL
Guess StoreRegent Street, London, UK Contractor: Collards Floors & Walls Ltd, Bristol
Products used: ARDEX X 78 S, ARDEX-FLEX FL
BBC SCOTLANDGlasgow, Scotland, UK Contractor: Watson Stonecraft Products used: ARDEX S 20
12
Ready Mixed Wall Tile Adhesives
ARDEX D 20 is a ready mixed adhesive for fixing ceramic tiles
and mosaics to all internal walls in dry or intermittently wet
locations, e.g. domestic showers, kitchens and bathrooms.
No primer required, easy to apply with excellent slump resistance
and offers up to 20 minutes open time and 40 minutes tile
adjustability. Tremendous adhesion strength and reliability.
Fix porcelain: Yes, if background absorbent
Grout after (walls): 24 hours
External use: No
Bed thickness: 1 - 3mm
Adjustment time: 40 minutes
Open time: 20 minutes
Colour: Off White
Pack size: 10ltr, 5ltr or 2.5ltr plastic tubs
Coverage: A 10 litre tub will cover approximately
10m2 at 1mm thick
Storage: Store out of direct sunlight.
Protect from frost. Storage life not less
than 12 months in unopened containers.
NOTES: For tile sizes above 300mm x 300mm we recommend the use of the appropriate ARDEX cement-based tile adhesive.
ARDEX D 20Ready Mixed Wall Tile Adhesive
ARDEX D 30 is a water resistant, non-slip ready mixed wall tile
adhesive ideal for use in commercial and domestic showers,
kitchens and bathrooms. Suitable for virtually all substrates and
tile types, including porcelain, ARDEX D 30 does not need a
primer and is easy to use with excellent application properties.
Fix porcelain: Yes, if background absorbent
Grout after (walls): 24 hours
External use: No
Bed thickness: 1 - 3mm
Adjustment time: 20 minutes
Open time: 20 minutes
Colour: Off White
Pack size: 10ltr plastic tub
Coverage: A 10 litre tub will cover approximately
10m2 at 1mm thick
Storage: Store out of direct sunlight.
Protect from frost. Storage life not less
than 12 months if stored in original
unopened containers.
ARDEX D 30Commercial and Domestic Ready MixedWall Tile Adhesive
D1T
D2TETE
Floor and Wall Tile Adhesives
Extremely versatile adhesive for internal/external applications,
swimming pools, etc., suitable for walls and floors.
Fix porcelain: Yes, with the addition of ARDEX E90
External use: Yes*
Grout after (walls): 24 hours
Grout after/
walk on (floors): 24 hours
Bed thickness: 1 - 6mm
Working time: 5 hours
Adjustment time: 10 minutes
Open time: 20 minutes
Colour: Grey or White
Pack size: 22kg or 11kg bags
Coverage: 1.3kg/m2/mm of bed thickness.
A 22kg bag will yield approximately
16.9 litres of mortar i.e. 5.6m2 at
3mm thick
Underfloor heating: Yes, with the addition of ARDEX E 90
Storage: 12 months from the date shown on
the packaging.
ARDEX X 7 G / ARDEX X 7 WTile Adhesive
White or grey rapid hardening and drying wall and floor adhesive
for fixing ceramic and natural stone tiles, glass mosaics,
porcelain and fully vitrified tiles in internal dry or intermittently
damp locations. Can be grouted or trafficked 2-3 hours after
fixing. ARDEX S 16 W is ideal for fixing translucent marble and
glass mosaics.
Fix porcelain: Yes
Grout after (walls): 2 - 3 hours
Grout after/
walk on (floors): 2-3 hours
External use: No
Bed thickness: 1 - 6mm
Working time: 30 minutes
Adjustment time: 10 minutes
Open time: 10 minutes
Colour: Grey or White
Pack size: 22kg or 11kg (Grey only) bags
Coverage: 1.35kg/m2/mm of bed thickness.
A 22kg bag will yield approximately
16.3 litres of mortar i.e. 5.4m2 at
3mm thick
Underfloor heating: Yes, with the addition of ARDEX E 90
Storage: 12 months from the date shown on
the packaging.
ARDEX S 16 / ARDEX S 16 WRapid Hardening and Rapid Drying Tileand Natural Stone Adhesive
NOTES: * External or other wet areas such as commercial showers, swimming pools etc.
C1T
C1TETE
Grey
White
C2FTFT
13
14
Specifically formulated to have a very high yield per bag (Ceram
Research has confirmed approximately 20% more coverage per
kg compared to traditional tile adhesives) along with enhanced
properties of adhesion and flexibility. Ideal for fixing fully vitrified
or porcelain tiles (internal areas only) and other tiles with low
porosity as well as glass and porcelain mosaics without the need
for an admixture.
Fix porcelain: Yes, internal only
Grout after (walls): 8 hours
Grout after/
walk on (floors): 24 hours
External use: Yes*, except for porcelain
Bed thickness: 1 - 6mm
Working time: 5 hours
Adjustment time: 20 minutes
Open time: 10 minutes
Colour: Grey
Pack size: 18kg bag
Coverage: 1kg/m2/mm of bed thickness. An 18kg
bag will yield approximately 18 litres of
mortar i.e. 6m2 at 3mm thick
Underfloor heating: Yes
Storage: 12 months from the date shown on
the packaging.
Use with all tile types including fully vitrified, porcelain and
mosaics. For internal and external applications including
swimming pools, etc. Suitable for walls and floors, built-in admix.
Tiles can be grouted and trafficked only 2 hours after fixing.
Fix porcelain: Yes
External use: Yes*
Grout after (walls): 2 hours
Grout after/
walk on (floors): 2 hours
Bed thickness: 1 - 6mm (3mm on timber)
Adjustment time: 10 minutes
Working time: 30 minutes
Open time: 10 minutes
Colour: Grey or White
Pack size: 20kg bag grey / 20kg bag white
Coverage: (Grey). 1.4kg/m2/mm of bed thickness.
A 20kg bag will yield approximately 14.3
litres of mortar i.e. 4.7m2 at 3mm thick
(White). 1.2kg/m2/mm of bed thickness.
A 20kg bag will yield approximately 16.7
litres of mortar i.e. 5.6m2 at 3mm thick
Underfloor heating: Yes
Storage: (Grey) 12 months, (White) 6 months
from the date shown on the packaging.
ARDEX X 7 R / ARDEX X 7 R WRapid Setting and Hardening FlexibleTile Adhesive with Built-In Admix
NOTES: * External or other wet areas such as commercial showers, swimming pools etc.
C2TE S1TE S1
ARDEX X 7 G PLUSFlexible Adhesive with Built-In Admixfor Floor and Wall Tiling in Internal/External Locations
C2FTFT
Grey White
Flexible Floor and Wall Tile Adhesives with Built-In Admix
C2T
15
Reduced risk of water staining. Apply from 5mm to 20mm thick,
ideal for uncalibrated natural stone tiles. Can be grouted and
trafficked 3 hours after fixing. ARDEX S 20 W white is ideal for
fixing translucent marble and other types of translucent natural
stones. Internal areas.
Fix porcelain: No
Grout after (walls): 3 hours
Grout after/
walk on (floors): 3 hours
External use: No
Bed thickness: 5-20mm
Working time: 45 minutes
Adjustment time: 10 minutes
Open time: 10 minutes
Colour: Grey or White
Pack size: 22kg bag
Coverage: 1.2kg/m2/mm of bed thickness. A 22kg
bag will yield approximately 18.3 litres of
mortar i.e. 3.6m2 at 5mm thick
Underfloor heating: Yes
Storage: 12 months from the date shown on
the packaging.
ARDEX S 20 / ARDEX S 20 WFlexible Rapid Hardening and Rapid DryingNatural Stone Tile Adhesive
C1F C2
F
Grey White
Internal or external floor or wall tile stone adhesive. Reduced risk
of water staining. Apply from 3mm to 30mm thick, ideal for
uncalibrated natural stone tiles. Can be grouted and trafficked 3
hours after fixing. ARDEX X 32 white is ideal for fixing translucent
marble and other types of translucent natural stones.
Fix porcelain: Yes
Grout after (walls): 3 hours
Grout after/
walk on (floors): 3 hours
External use: Yes
Bed thickness: 3-30mm
Working time: 60 minutes
Adjustment time: 30 minutes
Open time: 20 minutes
Colour: White
Pack size: 20kg bag
Coverage: 1.2kg/m2/mm of bed thickness. A 20kg
bag will yield approximately 16.5 litres of
mortar i.e. 5.5m2 at 3mm thick
Underfloor heating: Yes
Storage: 12 months from the date shown on
the packaging.
ARDEX X 32White Rapid Hardening and Rapid DryingNatural Stone Tile Adhesive
C2FTEFTE
S1S1
Flexible Floor and Wall Tile Adhesives with Built-In Admix
16
Flexible Floor and Wall Tile Adhesives with Built-In Admix
Fibre reinforced rapid setting adhesive. Tiles can be grouted and
trafficked only 90 minutes after fixing. Use with all tile types
including fully vitrified, porcelain and mosaics. For internal and
external applications including swimming pools, etc. Suitable for
walls and floors, built-in admix.
Fix porcelain: Yes
External use: Yes*
Grout after (walls): 90 minutes
Grout after/
walk on (floors): 90 minutes
Bed thickness: 1 - 6mm
Adjustment time: 15 minutes
Working time: 30 minutes
Open time: 20 minutes
Colour: Grey or White
Pack size: 20kg bag
Coverage: 1.2kg/m2/mm of bed thickness. A 20kg
bag will yield approximately 16.7 litres
of mortar i.e. 5.5m2 at 3mm thick
Underfloor heating: Yes
Storage: 6 months from the date shown on
the packaging.
ARDEX X 77 S / ARDEX X 77 W SMICROTEC® Ultra Rapid Setting FlexibleWall and Floor Tile Adhesive
NOTES: * External or other wet areas such as commercial showers, swimming pools etc.
Exceptionally long open time. Heavier, larger tiles can be used
without slipping. Fibre reinforced, flexible tile adhesive for
internal/external use, swimming pools, etc., use with all tile types
including fully vitrified, porcelain and mosaics. Suitable for walls
and floors, built-in admix.
Fix porcelain: Yes
External use: Yes*
Grout after (walls): 8 hours
Grout after/
walk on (floors): 24 hours
Bed thickness: 1 - 6mm
Adjustment time: 30 minutes
Working time: 3 hours
Open time: 60 minutes
Colour: Grey or White
Pack size: 20kg bag
Coverage: 1kg/m2/mm of bed thickness. A 20kg
bag will yield approximately 19 litres of
mortar i.e. 6.3m2 at 3mm thick
Underfloor heating: Yes
Storage: 12 months from the date shown on
the packaging.
ARDEX X 77 / ARDEX X 77 WMICROTEC® Flexible Wall and FloorTile Adhesive
17
Floor Tile Bedding Mortar and Flexible Floor Tile Bedding Mortar
NOTES: * External or other wet areas such as commercial showers, swimming pools etc.
For large format tiles. Pourable consistency. May be used to
smooth rough bases and make up screed levels.
For internal/external applications including swimming pools.
Tiles can be grouted and trafficked 3 hours after fixing.
Fix porcelain: Yes, with addition of ARDEX E90
External use: Yes*
Grout after/walk on: 3 hours
Screed bed thickness: 1 - 10mm/10 - 30mm with sand
Adhesive bed thickness: 3 - 6mm
Working time: 30 minutes
Adjustment time: Approximately 20 minutes
Open time: 10 minutes
Colour: Grey
Pack size: 22kg bag
Coverage: 1.8kg/m2/mm of bed thickness.
A 22kg bag will yield approximately
12.3 litres of mortar i.e. 4.1m2 at
3mm thick
Underfloor heating: Yes, with addition of ARDEX E90
Storage: 12 months from the date shown on
the packaging.
Fibre reinforced rapid setting floor tile adhesive. Tiles can be
grouted and trafficked 11⁄2 hours after fixing. For fixing all types of
ceramic floor tiles, mosaics, etc. Its enhanced adhesion
properties and easily workable consistency make it ideal for solid
bedding fully vitrified and porcelain large format tiles.
For internal/external applications.
Fix porcelain: Yes
External use: Yes*
Grout after/walk on: 5 hours
Bed thickness: 1 - 6mm
Working time: 30 minutes
Adjustment time: 15 minutes
Open time: 20 minutes
Colour: Grey or White
Pack size: 20kg bag
Coverage: 1.2kg/m2/mm of bed thickness. A 20kg
bag will yield approximately 16.5 litres of
mortar i.e. 5.5m2 at 3mm thick
Underfloor heating: Yes
Storage: 6 months from the date shown on
the packaging.
ARDEX X 78 S / ARDEX X 78 W SMICROTEC® Ultra Rapid Setting FlexibleFloor Tile Adhesive
C1F
ARDEX S 21Rapid Hardening Floor Tile Bedding Mortar
18
Fast Track Flexible Tile Adhesive, Epoxy Adhesive and Grout
Fibre reinforced pourable adhesive. Specifically designed for fixing
all types of floor tiles, including porcelain, to various surfaces
including wood-based sheets and boards. Tiles can be grouted
and trafficked 2 hours after fixing. ARDEX X 7001 W white is ideal
for fixing light and translucent marble and limestone.
Fix porcelain: Yes
External use: No
Grout after/walk on: 2 hours
Bed thickness: 1 - 6mm (1 - 4mm to timber)
Working time: 60 minutes
Adjustment time: 15 minutes
Open time: 15 minutes
Colour: Grey or White
Pack size: 20kg bag
Coverage: 1.4kg/m2/mm of bed thickness. A 20kg
bag will yield approximately 14.4 litres of
mortar i.e. 4.8m2 at 3mm thick
Storage: 12 months from the date shown on
the packaging.
ARDEX X 7001 / X 7001 WMICROTEC® Rapid Drying Pourable FloorTile Adhesive
R2T
For use in wet areas including swimming pools, easy to apply and
clean off. For internal and external applications. Use where high
standards of hygiene and cleanliness are required. Solvent free,
waterproof and frost resistant, for wall and floor tile joints 2-
12mm wide.
Fix/grout porcelain: Yes
External use: Yes
Grout after (walls): 12 hours
Grout after/walk on (floors): 12 hours
Bed thickness: 1 - 3mm
Working time: 85 minutes
Open time: 85 minutes
Adjustment time: 85 minutes
Colours: Grey or White
Joint width: 2 - 12mm
Pack size: 4kg or 2kg (White only) plastic tubs
Coverage: 1.5kg/m2/mm of bed thickness.
As an adhesive: A 4kg unit is sufficient
for approximately 1.4m2 of tiles.
As a grout: Refer to grout coverage table
(page 66)
Storage: 12 months from the date shown on
the packaging.
ARDEX WAEpoxide Adhesive and Grout
C2FEFE
Adhesive
RG
Grout
19
Tile Grouts
CG2 CG2
For wall and floor tile joints from 3-15mm wide in
internal/external locations, including swimming pools.
Built-in admix. Available in 32 colours.
Joint width: 3 - 15mm
Grout porcelain: Yes
Workable: 30 minutes
Walkability: 90 minutes
External use: Yes
Colours: 32 colours available
refer to colour chart on page 68
Pack size: 2.5kg or 10kg bags
Coverage: Refer to grout coverage table (page 67)
Underfloor heating: Yes
Storage: 12 months from the date shown on
the packaging.
Water repellent and dirt resistant flexible tile grout for tile joints
up to 4mm wide. Easy to apply and clean off, suitable for use in
internal/external locations, swimming pools, etc. Suitable for
walls and floors. Built-in admix. Available in 32 colours.
Joint width: Up to 4mm
Grout porcelain: Yes
Workable: 21⁄2 hours
Walkability: 5 hours
External use: Yes
Colours: 32 colours available
refer to colour chart on page 68
Pack size: 2.5kg or 10kg bags
Coverage: Refer to grout coverage table (page 67)
Underfloor heating: Yes
Storage: 12 months from the date shown on
the packaging.
ARDEX-FLEX FSFlexible Tile Grout with Built-In Admix
ARDEX-FLEX FLRapid Setting and Hardening, FlexibleTile Grout with Built-In Admix
NARROWJOINTSWIDE
JOINTS
20
Tile Grouts
Use for wall tiling and in swimming pools, etc., for joints up to
4mm wide. Both easy to apply and clean off.
Joint width: Up to 4mm
Grout porcelain: Yes, with addition of ARDEX E101
Workable: 2 - 3 hours
External use: Yes
Colours: Polar White, Beige, Light Grey
Pack size: 11kg bag
Coverage: Refer to grout coverage table (page 67)
Storage: 12 months from the date shown on
the packaging.
Available in grey, white, limestone, sandstone, beige or anthracite
– for joint widths from 2mm upwards, suitable for wall and floor
tiling in internal/external locations, swimming pools, etc.
Joint width: 2 - 20mm
Grout porcelain: Yes, with addition of ARDEX E101
Workable: 2 - 3 hours
Walkability: 24 hours
External use: Yes
Colours: Anthracite, Beige, Grey, Limestone,
White, Sandstone
Pack size: 11kg or 5kg (Beige, Grey or White
only) bags
Coverage: Refer to grout coverage table (page 67)
Underfloor heating: Yes, with the addition of ARDEX E 101
Storage: 12 months from the date shown on
the packaging.
ARDEX C 2Wall and Floor Tile Grout
ARDEX F 4Fine Wall Tile Grout
CG1 CG1
21
For tile joint widths from 3mm upwards. Suitable for
internal/external use on floors and walls.
Joint width: 3 - 20mm
Grout porcelain: Yes, with addition of ARDEX E101
Workable: 30 minutes
Walkability: 3 hours
External use: Yes
Colours: Anthracite or Grey
Pack size: 11kg bags
Coverage: Refer to grout coverage table (page 67)
Underfloor heating: Yes, with the addition of ARDEX E 101
Storage: 12 months from the date shown on
the packaging.
Virtually eliminates the risk of water staining of the edges of
moisture sensitive natural stone tiles. For joint widths up to 8mm,
suitable for wall and floor tiling. Walk on and traffic only 90
minutes after application.
Joint width: Up to 8mm
Workable: 30 minutes
Walkability: 90 minutes
External use: No
Colours: Light Grey, Dark Grey, White,
Limestone, Sandstone
Pack size: 11kg bags
Coverage: Refer to grout coverage table (page 67)
Underfloor heating: Yes
Storage: 12 months from the date shown on
the packaging.
ARDEX MGRapid Drying Marble and Natural StoneTile Grout
ARDEX GKRapid Setting and Hardening Grout
Flexible Floor and Wall Tile Grouts with Built-In Admix
CG12A2A
CG2
22
Waterproof Coatings, Mesh Scrim
A rapid drying flexible, waterproof protection coat ideal for use on
moisture sensitive backgrounds prior to tiling in commercial or
domestic kitchens, showers and bathrooms. Tiling can
commence just 2 hours after application of second coat.
Pot life: Approximately 45 minutes
Curing time: 1 hour for first coat, 2 hours for
second coat
Fix tiles after: 2 hours after application of second coat
Colour: Brown
Pack size: 5kg plastic bottle (liquid)
5kg bag (powder)
Coverage: 6.6m2 per unit to give a 0.8mm thick
coating (2 coats)
Underfloor heating: Yes
Storage: 12 months from the date shown on
the packaging.
ARDEX WPCFlexible Rapid Drying and SettingWaterproof Coating
A flexible rapid drying waterproof jointing and filling mortar that is
simple to apply. For creating a waterproof joint between wall and
floor tile backing boards.
Pot life: Approximately 45 minutes
Fix mesh scrim/tiles: 1 hour
Colour: Brown
Pack size: 2kg plastic bottle (liquid)
3kg bag (powder)
Coverage: 35 linear metres of a 10mm x 10mm
bead (3.5 litres of mortar)
Underfloor heating: Yes
Storage: 12 months from the date shown on
the packaging.
ARDEX WPJWaterproof Jointing and Filling Mortar
ARDEX MESH SCRIMMesh scrim for use with ARDEX WPJ to reinforce board joints.
20 metre roll.
23
Fast Track Tiling Render, Smoothing and Levelling Compounds
Specially formulated pre-blended cement/sand render, requiring
only the addition of water to produce a slump free mortar which
can be applied 2-20mm and is ready to receive wall tiling only 2
hours after application.
Application thickness: 2 - 20mm
Working time: 30 minutes
Fix ceramics: 2 hours
28 day strength
(N/mm2): 11
Final set: 90 minutes
External use: Yes*
Pack size: 25kg bags
Coverage: 1.3kg/m2/mm. A 25kg bag will yield
approximately 19 litres of mortar i.e.
3.2m2 at 6mm thick
Storage: 12 months from the date shown on
the packaging.
Free flowing levelling compound for smoothing sub-floors prior to fixing
natural stone and ceramic floor tiles. Particularly useful when fixing large
format floor tiles which require a very flat sub-floor. Can be applied from
1.5 to 10mm thick.
Application thickness total: 1.5 - 10mm
Application thickness neat: 1.5 - 10mm
Working time: 30 mins at 20°C
Walkable: 21⁄2 hours at 20°C
Fix ceramics: 4 hours at 20°C
28 Day compressive strength: 35N/mm2
External use: No - consult ARDEX Technical Services
Under DPM: No - consult ARDEX Technical Services
Underfloor heating: Yes
Pack size: 20kg bag
Coverage: Depending on flatness of surfacea 20kg bag will cover approximately 6.4m2 at 2mm thick
Material requirement: 1.6kg of mortar/m2/mm
Storage: 12 months from the date shown on
the packaging.
Mix water requirement: 4 - 4.2 litres per 20kg bag.
ARDEX FLOOR LEVELUnder-Tile Levelling and SmoothingCompound for Floors
NOTES: * External or other wet areas such as commercial showers, swimming pools etc.
ARDEX AM 100Rapid Hardening One Coat Tiling Render
Smoothing and Levelling Compounds
24
ARDITEX NA is a self-smoothing, protein free, low odour latex levelling
compound. It is used for the preparation of cement/sand and concrete screeds,
metal, quarry tiles, asphalt flooring (grade 1), granolithic or terrazzo floors, prior
to applying the floor tiles. May also be used for pre-smoothing timber floors prior
to oversheeting with plywood and can be used under a damp proof membrane,
such as ARDEX DPM. Also used to encapsulate under-tile heating cables to
concrete, screeds and thermal tilebacking boards.
Application thickness total: 0 - 30mm
Application thickness neat: 0 - 12mm
Application thicknesswith aggregate: 8 - 30mm use from half to
equal volumes of ARDEX COARSEAggregate to ARDITEX NA mix
Working time: 20 mins at 20°C
Walkable: 2 hours at 20°C
Fix ceramics: 4 - 6 hours at 20°C
28 Day compressive strength: 16.5 N/mm2
Final set: 11⁄2 hours at 20°C
External use: Consult ARDEX Technical Services
Under DPM: Yes
Coverage: Depending on flatness and texture
of surface one unit will cover approximately 5m2 at 3mm thick
Material requirement: 1.6kg of mortar/m2/mm
Underfloor heating: Yes
Pack size: 20kg bags with 4.85kg latex liquid
Storage: ARDITEX NA powder has a storage
life of 12 months from the date
shown on the packaging. ARDITEX NA
latex has a storage life of not less
than 6 months from the date
shown on the packaging.
Rapid hardening and drying pump or hand applied levelling
mortar which can be tiled on 4 hours after application. Ideal for
interior, fast track tiling.
Application thickness: 5 - 35mm
Application thickness
with aggregate: 20 - 35mm use from half to equal
volumes of ARDEX COARSE
Aggregate to the ARDEX K 15-HB mix
Working time: 30 mins at 20°C
Walkable: 2 hours at 20°C
Fix ceramics: After 4 hours at 20°C
Final set: 2 hours at 20°C
External use: No
Under DPM: No
Coverage: Depending on flatness of surface
a 25kg bag will cover approximately
2.7m2 at 5mm thick
Pack size: 25kg bag
Material Requirement: 1.84kg of powder/m2/mm
Underfloor heating: Yes
Storage: 12 months from the date shown on
the packaging.
Mix Water Requirement: 4 - 4.25 litres per 25kg bag.
ARDEX K 15-HBHigh Build Rapid DryingSub-Floor Smoothing Compound
ARDITEX NAUltra Rapid Setting Latex Sub-FloorLevelling and Smoothing Compound
Fast Track Concrete Resurfacer, External Patch and Repair Mortar
25
A fast setting cost effective solution for smoothing rough or
damaged concrete or cement/sand screeds and is suitable for
internal and external applications prior to tiling. ARDEX K 301 is
walkable after 2-3 hours and can be tiled onto after 24 hours.
Use to level uneven surfaces, such as paths and patios.
Application Thickness Total: 2 - 20mm
Application Thickness Neat: 2 - 20mm
Working Time: Approx. 30 mins at 20°C
Walkable: 2 - 3 hours at 20°C
28 Day Compressive Strength: 28 N/mm2
External Use: Yes
Under DPM: Yes
Underfloor Heating: No
Coverage: Depending on flatness of
surface a 25kg bag will
cover approximately 7.8m2
at 2mm thick.
Material Requirement: 1.6kg powder/m2/mm
Packaging: 25kg bag
Storage: 12 months from the date
shown on the packaging.
Mix Water Requirement: 5.25 litres per 25kg bag.
Rapid setting and hardening, slump free repair and patch mortar
which is ideal for external use or for internal repairs and
smoothing, prior to the application of ceramic tile finishes.
Can be used to repair concrete and cement/sand screeds,
repair steps or create ramps and falls.
Application Thickness Total: 2 - 30mm
Application Thickness Neat: 2 - 30mm
Working Time: 15 mins at 20°C
Walkable: 2-3 hours at 20°C
Fix Ceramics: 24 hours at 20°C
28 Day Compressive Strength: 20 N/mm2
Apply Floorcoverings: 24 hours at 20°C
External Use: Yes
Under DPM: Yes
Underfloor Heating: Yes
Coverage: Depending on flatness of
surface an 11kg bag will
cover approximately 4m2 at
2mm thick (8 litres of
mortar).
Packaging: 11kg bag
Storage: 6 months from the date
shown on the packaging.
Mix Water Requirement: 2.7 - 3 litres per 11kg bag.
ARDEX A 46Rapid Setting and Hardening ExternalPatch and Repair Mortar
ARDEX K 301Fast Setting Resurfacing andLevelling Compound
Used in place of Portland Cement in cement/sand screeds,
ARDEX A 35 produces a floor screed that can be walked on after
3 hours and is dry enough to receive tiling after 24 hours
regardless of thickness. After 1 day the compressive and tensile
strengths of an ARDEX A 35 screed exceed the acceptable
minimum attained by a conventional screed after 28 days.
Thickness bonded screed: 15 - 50mm
Thickness unbonded screed: 50mm+
Thickness floating screed: 65/75mm+ (65mm for
domestic locations only)
Working time: 1 hour at 20°C
Walkable: 3 hours at 20°C
Fix ceramics - bonded screed: 24 hours at 20°C
Fix ceramics - unbonded screed: 24 hours at 20°C
External use: No
Under DPM: No
Coverage: Depending on flatness of
surface a 25kg bag of
ARDEX A 35 mixed with
125kg (1:5 mix) of screeding
sand will cover approximately
1.6m2 at 50mm thick
Pack size: 25kg bags
Underfloor heating: Yes
Storage: 12 months from the date
shown on the packaging.
Material Requirement: 1:4 mix = 0.37kg/m2/mm
1:5 mix = 0.31kg/m2/mm
Unique ready-for-use, rapid drying, pre-blended, screeding and
screed repair mortar that just requires water to produce a
screeding mortar with rapid strength development for receiving
tiling after 24 hours, regardless of thickness.
Thickness bonded screed: 15 - 50mm
Thickness unbonded screed: 40mm+
Thickness floating screed: 65/75mm+ (65mm for
domestic locations only)
Working time: 1 hour at 20°C
Walkable: 3 hours at 20°C
Fix ceramics - bonded screed: 24 hours at 20°C
Fix ceramics - unbonded screed: 24 hours at 20°C
28 day compressive strength: 40 N/mm2
External Use: No
Under DPM: No
Coverage: Depending on flatness of
surface approximately 0.83m2
at 15mm thick per 25kg bag
Pack size: 25kg bags
Underfloor heating: Yes
Storage: 12 months from the date
shown on the packaging.
Material Requirement: 1.85kg of powder/m2/mm
ARDEX A 35 MIXRapid Drying Pre-Blended Screeding andScreed Repair Mortar
ARDEX A 35Rapid Setting, Hardening and DryingCement for Floor Screeds
Fast Track Floor Screeds
26
Fast Track Floor Screeds
27
A specially formulated cement for producing rapid setting and
hardening floor screeds, bedding mortars and wear resistant
screeds for internal and external applications. As a bonded
screed, can receive ceramic tiles after only 3 hours.
Thickness bonded screed: 20 - 50mm
Thickness unbonded screed: 50mm+
Thickness floating screed: 65/75mm+ (65mm for
domestic locations only)
Working time: 45 mins at 20°C
Walkable: 3 hours at 20°C
Fix ceramics - bonded screed: 3 hours
Fix ceramics - unbonded screed: 14 days
External use: Yes
Under DPM: Yes
Coverage: Depending on flatness of
surface approximately 2m2
per 25kg bag for 30mm
1:4 screed
Pack size: 25kg bags
Storage: 12 months from the date
shown on the packaging.
Material Requirement: 1:3 mix = 0.5kg/m2/mm
1:4 mix = 0.4kg/m2/mm
1:5 mix = 0.35kg/m2/mm
An easily mixed, fast setting bonding cement, applied as a
bonding grout prior to the application of ARDEX EB 2.
Suitable for internal and external applications.
Application thickness: Approximately 1mm thick
Working time: 45 mins at 20°C
External use: Yes
Under DPM: Yes
Coverage: Depending on flatness of surface a
25kg bag will cover approximately
17m2 at 1mm thick
Material requirement: 1.5kg powder/m2/mm
Pack size: 25kg bags
Storage: 12 months from the date shown on
the packaging.
ARDEX B 2Fast Setting Screed Bonding Cement System
ARDEX EB 2Rapid Hardening Cement for Floor Screeds
Schlüter Ditra Matting Adhesive, Admixes
28
ARDEX AF 200 is a water-based, low odour, solvent free, high
quality dispersion adhesive for adhering Schlüter Ditra matting to
timber floors.
Coverage: Notch size (mm) m2/litre
2 x 6 3 approximately
Open/working time: Up to 1 hour depending on room
temperature/humidity and absorbency
of the sub floor
Colour: Cream
Storage: 12 months from the date shown on
the packaging if stored in good
conditions between 5°C and 30°C in
original unopened containers.
Packaging: Available in 5 litre and 15 litre tubs.
Mortar admix for use with ARDEX cement-based adhesives.
Gives elastic and water repellent properties plus enhanced
adhesive strength if fixing to smooth or glazed surfaces.
Colour: White
Pack size: 2kg or 4kg plastic containers
Coverage: 4kg per 22kg bag of ARDEX X 7/S 16
(2kg for ARDEX S 21)
Storage: 12 months from the date shown on
the packaging.
ARDEX E 90Tile Adhesive Improver
ARDEX AF 200Schlüter Ditra Matting Bonding Adhesive
Grout admix for ARDEX C 2, F 4 and GK cement-based grouts and
normal cement/sand grout mortars. For elastic and water
repellent tile joints.
Colour: White
Pack size: 1kg or 5kg plastic containers
Coverage: 1kg per 11kg bag of ARDEX C 2, F 4
or GK grout
Storage: 12 months from the date shown on
the packaging.
ARDEX E 101Tile Grout Improver
Primers
29
Primer for anhydrite screeds and gypsum plaster prior to applying
ARDEX cement-based tile adhesives as well as porous sub-floors
to improve adhesion of ARDEX sub-floor smoothing compounds,
helps prevent air bubbles/pin holes and prolong the flow life.
Use as part of the bonding slurry for ARDEX A 35 Screed and for
use with ARDEX X 7001 adhesive to timber floors.
Coverage:
Determined by dilution: e.g for porous screeds, dry, sound
anhydrite screeds and gypsum plaster - 5kg diluted with 3
volumes of water is sufficient for priming approximately 100m2
e.g for power float concrete - 5kg diluted with 2 volumes of
water is sufficient for priming approximately 60m2 e.g for rough
concrete - 5kg diluted with an equal volume of water is sufficient
for priming approximately 35m2. Undiluted a 1kg bottle will cover
approximately 5m2.
Pack size:
25kg, 5kg or 1kg containers
Storage:
12 months from the date shown on the packaging.Solvent free, non-flammable, two part, water dispersed epoxy
primer and bonding agent for use on all dense impervious
surfaces, including hard flooring grade asphalt, ceramic and
quarry tiles and rigid metal sub-floors, prior to applying ARDEX
cement-based tile adhesives.
Coverage:
Depending on the surface to be primed and method of
application 10 - 20m2 per 2kg unit, 30 - 60m2 per 6kg unit
Material requirement:
5-10m2 per kg of mixed primer
Pack size:2kg or 6kg units
Storage:
12 months from the date shown on the packaging.
Protect from frost.
ARDEX P 82Water Dispersed Epoxy Primer
Solvent free primer for internal/external application to walls,
floors and ceilings. Used prior to the application of ARDEX
ceramic tile adhesives and levelling compounds. Produces
textured surface and dries in one hour. Virtually drip free.
Paricularly useful for tile on tile applications. Applied to concrete,
cement/sand screeds, ceramic tiles, terrazzo.
Coverage:
Dependant on the surface to be primed - usually 40m2
per 8kg tub
Pack size:
8kg tub
Storage:
12 months in the original unopened container.
ARDEX P 4Ready Mixed Rapid DryingMulti-Purpose Primer
ARDEX P 51Primer and Bonding Agent
30
Floor Tiling System Selector
These overviews show some of the systems that can be used for various
circumstances. These should only be used in conjunction with the
guidance given in the current ARDEX data sheets for the individual
products shown.
Detailed design data sheets are available for some of the key systems
and site specific guidance can be provided by contacting your local
ARDEX Area Manager or the ARDEX Technical Services Department.
Other combinations of adhesives and grouts may be suitable, please
consult the individual product data sheets for further information.
FLOOR AND WALL TILING, SOLID BED FIXING IS REQUIRED (NO VOIDS
BEHIND TILES) IN EXTERNAL LOCATIONS.
FLOOR TILING IN EXTERNAL LOCATIONS SHOULD PREFERABLY BE
LAID TO FREE DRAINING FALLS.
N.B. All ARDEX products should be mixed and applied in accordance
with the relevant product data sheet.
The use of ARDEX AM 100 Rapid Hardening One Coat Tiling Render
allows tiles to be fixed only 2 hours after application.
A bonded ARDEX EB 2 screed will allow tiles to be fixed only 3 hours
after application.
CONCRETE OR CEMENT/SAND SCREED DRY AREAS
WET AREAS
FLOOR TILING SYSTEM 1 - P32
FLOOR TILING SYSTEM 2 - P33
ANHYDRITE SCREED DRY AREAS FLOOR TILING SYSTEM 3 - P34
FLOORING GRADE ASPHALT DRY AREAS
WET AREAS
FLOOR TILING SYSTEM 4 - P35
FLOOR TILING SYSTEM 5 - P36
EXISTING CERAMIC FLOOR TILING/TERRAZZO DRY AREAS
WET AREAS
FLOOR TILING SYSTEM 6 - P37
FLOOR TILING SYSTEM 7 - P38
TIMBER FLOORS DRY AREAS
WET AREAS
FLOOR TILING SYSTEM 8 - P39
FLOOR TILING SYSTEM 9 - P40
HEATED TIMBER FLOORS FLOOR TILING SYSTEM 10 - P41
HEATED CONCRETE OR CEMENT/SAND SCREED FLOOR TILING SYSTEM 11 - P42
TILEBACKER BOARDS FLOOR TILING SYSTEM 12 - P43
INDUSTRIAL AREAS, CHEMICALLY RESISTANT JOINTS OR HYGIENIC JOINTS FLOOR TILING SYSTEM 13 - P44
DAMP CONCRETE/CEMENT AND SAND SCREED REQUIRING DPM FLOOR TILING SYSTEM 14 - P45
SUBSTRATE TO BE TILED
INTERNAL FLOORS
SITE CONDITIONS ARDEX SYSTEM
CONCRETE OR CEMENT/SAND SCREED
EXISTING GLAZED/UNGLAZED TILES, TERRAZZO
FLOOR TILING SYSTEM 15 - P46
FLOOR TILING SYSTEM 16 - P47
EXTERNAL FLOORS
N.B. All ARDEX products should be mixed and applied in accordance with the relevant product data sheet.
Floor Tiling - Background/Substrate Preparation
31
Background/Substrate Preparation
All backgrounds must be rigid, clean, stable and free from any barriers to
adhesion such as dust, plaster droppings, grease, polish and any water
softenable or loosely adhered materials. Good adhesion to a stable background
is very important to guarantee the successful application of tiling.
Surfaces to be tiled must be flat and when checked with a 2m straight edge,
any gap under the straight edge between points of contact with the surface
should not exceed 3mm (Surface Regularity 1). Any small scale irregularities
should be pre-smoothed before tiling.
* With an unbonded ARDEX A 35 cement/sand screed tiles can be fixed after
only 24 hours, with a bonded ARDEX EB 2 cement/sand screed tiles can be
fixed after only 3 hours.
If thinner layers need to be made up, consideration should be given to the use
of the appropriate ARDEX smoothing compound.
Primers
ARDEX P 4 - Solvent free primer for internal/external
application to walls, floors and ceilings. Used prior to the
application of ARDEX ceramic tile adhesives and levelling
compounds. Produces textured surface and dries in one
hour. Virtually drip free. Paricularly useful for tile on tile
applications. Applied to concrete, cement/sand screeds,
ceramic tiles, terrazzo.
ARDEX P 51 - For use with ARDEX X 7001.
Also for use on porous and absorbent anhydrite screeds.
ARDEX P 82 - Non-flammable, water dispersed epoxy
primer for bonding to smooth impervious surfaces
including existing ceramic tiling, internal asphalt, terrazzo,
sound and well adhered paint coatings and old adhesive
residues, prior to the use of cement-based adhesives.
Bed thickness maximum 3mm unless using ARDEX S 20.
Adhesive bed thickness not greater than 6mm.
ARDEX WPC can be used to protect moisture sensitive
backgrounds in wet locations, prior to fixing tiles using the
appropriate ARDEX cement-based adhesive.
Internal Floors
CEMENT/SAND SCREEDNew cement and sand screeds require at least 3 weeks drying time prior
to fixing tiles.*
ANHYDRITE SCREEDEnsure that the surface has been prepared in accordance with the
manufacturers instructions and is free of dust, is hard and the anhydrite
screed is fully dry. Use ARDEX P 51 primer diluted 1:3 by volume with
water.
HARD FLOORING GRADE ASPHALT SANDEDWith well adhered sand key no primer is required. If sand key
is poor or worn off, proceed as for smooth asphalt.
HARD FLOORING GRADE ASPHALT SMOOTHUse ARDEX P 82 primer.
EXISTING CERAMIC TILINGEnsure existing tiling is well adhered. Thorough cleaning and rinsing off
essential.
TERRAZZOEnsure existing terrazzo is well adhered. Thorough cleaning and rinsing off
essential; mechanical preparation may be required.
CONCRETEEnsure that new concrete is at least 6 weeks old prior to tiling.
Check that surface curing agents are removed.
WET LOCATIONSBackgrounds should be water resistant and suitable for direct fixing. Tiles
should be solid bed fixed.
TIMBER FLOORSUse undiluted ARDEX P 51 only with ARDEX X 7001/ARDEX X 7001 W.
Use ARDEX P82 or ARDEX P 51 with ARDEX S16/ARDEX E90.
1
1
2
2
2
3
3
External Floors
CEMENT/SAND RENDER AND SCREEDWood float finish and prevent rapid drying out. Allow to air dry for at least 2
weeks (renders) or at least 3 weeks (screeds) prior to tiling.*
CONCRETEAllow at least 6 weeks drying time prior to fixing tiles onto new concrete.
Ensure all formwork release agents are removed.
EXISTING CERAMIC TILINGEnsure existing tiling is well adhered and can support the new tile bed.
Thorough cleaning and rinsing off essential.
BRICKWORKAllow new walls to dry for at least 6 weeks prior to direct fixing or rendering.
P R E M I U M P E R F O R M A N C E
• Tiling to concrete or cement/sand screed - dry areas
• Internal floors
Concrete orcement/sandsand screed
Floor tiles
Multi-purpose flexible, all tile types:ARDEX X 7 G PLUS
Multi-purpose, rapidset flexible,all tile types:ARDEX X 7 R
MICROTEC® Ultra Rapid SettingFlexible Floor Tile Adhesive, largeformat tiles:ARDEX X 78 S
Wide joints:ARDEX-FLEX FL
Narrow joints:ARDEX-FLEX FS
32
NOTE: For natural stone tiling refer to the‘ARDEX Natural Stone Tiling Guide’.
If smoothing or levelling of the sub-floor isrequired prior to tiling the use of theappropriate ARDEX smoothing or levellingcompound should be considered.
See notes on Page 31 regarding suitabilityand preparation of concrete andcement/sand screeds prior to tiling.
Floor Tiling System 1
NARROWJOINTS
WIDEJOINTS
33
P R E M I U M P E R F O R M A N C E
• Tiling to concrete or cement/sand screed - wet areas
• Internal floors
Concrete orcement/sandscreed or ARDEXA 35 rapid dryingscreed
Floor tiles
Multi-purpose flexible, all tile types:ARDEX X 7 G PLUS
Multi-purpose, rapidset flexible,all tile types:ARDEX X 7 R
MICROTEC® Ultra Rapid SettingFlexible Floor Tile Adhesive, largeformat tiles:ARDEX X 78 S
Floor Tiling System 2
ARDEX WPC
NOTE: For natural stone tiling refer to the‘ARDEX Natural Stone Tiling Guide’.
If smoothing or falls are required prior toapplying the waterproof coatings the use ofthe appropriate ARDEX smoothingcompound or screeding mortar should beconsidered.
See notes on Page 31 regarding suitabilityand preparation of concrete andcement/sand screeds prior to tiling.
Wide joints:ARDEX-FLEX FL
Narrow joints:ARDEX-FLEX FS
NARROWJOINTS
WIDEJOINTS
34
NOTE: For natural stone tiling refer to the‘ARDEX Natural Stone Tiling Guide’.
See notes on Page 31 regarding suitabilityand preparation of concrete andcement/sand screeds prior to tiling.
P R E M I U M P E R F O R M A N C E
• Tiling to anhydrite screed - dry areas
• Internal floors
Anhydrite screed
Floor tiles ARDEX P 51(Diluted 1:3)
Multi-purpose flexible, all tile types:ARDEX X 7 G PLUS
Multi-purpose, rapidset flexible,all tile types:ARDEX X 7 R
MICROTEC® Ultra Rapid SettingFlexible Floor Tile Adhesive, largeformat tiles:ARDEX X 78 S
Floor Tiling System 3
Wide joints:ARDEX-FLEX FL
Narrow joints:ARDEX-FLEX FS
NARROWJOINTS
WIDEJOINTS
35
Floor Tiling System 4
P R E M I U M P E R F O R M A N C E
• Tiling to flooring grade asphalt - dry areas
• Internal floors
Sand keyedasphalt
Floor tiles
Multi-purpose flexible, all tile types:ARDEX X 7 G PLUS
Multi-purpose, rapidset flexible,all tile types:ARDEX X 7 R
MICROTEC® Ultra Rapid SettingFlexible Floor Tile Adhesive, largeformat tiles:ARDEX X 78 S
ARDEX P 82
Smooth asphalt
NOTE: For natural stone tiling refer to the‘ARDEX Natural Stone Tiling Guide’.
See notes on Page 31 regarding suitabilityand preparation of concrete andcement/sand screeds prior to tiling.
Wide joints:ARDEX-FLEX FL
Narrow joints:ARDEX-FLEX FS
NARROWJOINTS
WIDEJOINTS
P R E M I U M P E R F O R M A N C E
• Tiling to flooring grade asphalt - wet areas
• Internal floors
Sand keyed asphalt
Floor tiles ARDITEX NA3-6mm thick
Multi-purpose flexible, all tile types:ARDEX X 7 G PLUS
Multi-purpose, rapidset flexible,all tile types:ARDEX X 7 R
MICROTEC® Ultra Rapid SettingFlexible Floor Tile Adhesive, largeformat tiles:ARDEX X 78 S
Smooth asphalt
36
NOTE: For natural stone tiling refer to the‘ARDEX Natural Stone Tiling Guide’.
See notes on Page 31 regarding suitabilityand preparation of asphalt floors prior totiling.
Floor Tiling System 5
Wide joints:ARDEX-FLEX FL
Narrow joints:ARDEX-FLEX FS
NARROWJOINTS
WIDEJOINTS
37
P R E M I U M P E R F O R M A N C E
• Tiling to existing ceramic floor tiling/terrazzo - dry areas
• Internal floors
Floor Tiling System 6
Existing floor tiles
New floortiles
Multi-purpose flexible, all tile types:ARDEX X 7 G PLUS
Multi-purpose, rapidset flexible,all tile types:ARDEX X 7 R
MICROTEC® Ultra Rapid SettingFlexible Floor Tile Adhesive, largeformat tiles:ARDEX X 78 S
ARDEX P 82 or ARDEX P 4
NOTE: For natural stone tiling refer to the‘ARDEX Natural Stone Tiling Guide’.
See notes on Page 31 regarding suitabilityand preparation of existing ceramic floortiles and terrazzo prior to tiling.
Wide joints:ARDEX-FLEX FL
Narrow joints:ARDEX-FLEX FS
NARROWJOINTS
WIDEJOINTS
38
P R E M I U M P E R F O R M A N C E
• Tiling to existing ceramic floor tiling/terrazzo - wet areas
• Internal floors
Existing floor tiles
New floortiles
ARDITEX NA3-6mm
Multi-purpose flexible, all tile types:ARDEX X 7 G PLUS
Multi-purpose, rapidset flexible,all tile types:ARDEX X 7 R
MICROTEC® Ultra Rapid SettingFlexible Floor Tile Adhesive, largeformat tiles:ARDEX X 78 S
ARDEX P 4 andARDEX FLOOR LEVEL
ARDEX WPC
NOTE: For natural stone tiling refer to the‘ARDEX Natural Stone Tiling Guide’.
See notes on Page 31 regarding suitabilityand preparation of existing ceramic floortiles and terrazzo prior to tiling.
Floor Tiling System 7
Wide joints:ARDEX-FLEX FL
Narrow joints:ARDEX-FLEX FS
NARROWJOINTS
WIDEJOINTS
or
39
P R E M I U M P E R F O R M A N C E
• Tiling to timber floors - dry areas
• Internal floors
Floor Tiling System 8
Existingfloorboards
Floor tiles
ARDEX X 7001
NOTE: For natural stone tiling refer to the‘ARDEX Natural Stone Tiling Guide’.
Further guidance on the fixing of ceramicfloor tiles to wood-based boards isdescribed in the ‘Fixing Ceramic Tilesto existing suitable Tongued and GroovedFloorboards’ leaflet.
ARDEX P 51(Undiluted)
Wide joints:ARDEX-FLEX FL
Narrow joints:ARDEX-FLEX FS
NARROWJOINTS
WIDEJOINTS
P R E M I U M P E R F O R M A N C E
• Tiling to timber floors - wet areas
• Internal floors
Existing floorboards
Floor tiles
Multi-purpose flexible, all tile types:ARDEX X 7 G PLUS
Multi-purpose, rapidset flexible,all tile types:ARDEX X 7 R
MICROTEC® Ultra Rapid SettingFlexible Floor Tile Adhesive, largeformat tiles:ARDEX X 78 S
NOTE: For natural stone tiling refer to the‘ARDEX Natural Stone Tiling Guide’.
Pre-smooth withselected tile adhesive
Schlüter Ditra mattingwww.schluter.co.uk
ARDEX AF 200Schlüter Ditra MattingBonding Adhesive
Size of adhesive ribbing shownfor illustrative purposes only
40
Floor Tiling System 9
Wide joints:ARDEX-FLEX FL
Narrow joints:ARDEX-FLEX FS
NARROWJOINTS
WIDEJOINTS
41
Proprietaryinsulating tilebacking board
P R E M I U M P E R F O R M A N C E
• Tiling to heated timber floors
• Internal floors
Floor Tiling System 10
Existingfloorboards
Floor tiles
Heating cables
Multi-purpose flexible, all tile types:ARDEX X 7 G PLUS
Multi-purpose, rapidset flexible,all tile types:ARDEX X 7 R
MICROTEC® Ultra Rapid SettingFlexible Floor Tile Adhesive, largeformat tiles:ARDEX X 78 S
Pre smoothing layerof ARDITEX NA orARDEX adhesiveshown above
NOTE: For natural stone tiling refer to the‘ARDEX Natural Stone Tiling Guide’.
Further guidance on the fixing of specificproprietary insulating tile backing board isdescribed in the relevant ARDEX/Wedi,ARDEX/Marmox or ARDEX/Kerdiapplication leaflets.
Wide joints:ARDEX-FLEX FL
Narrow joints:ARDEX-FLEX FS
NARROWJOINTS
WIDEJOINTS
42
NOTE: For natural stone tiling refer to the‘ARDEX Natural Stone Tiling Guide’.
See notes on Page 31 regarding suitabilityand preparation of heated concrete or cement/sand screeds prior to tiling. Reference should be made to IGN 7.
P R E M I U M P E R F O R M A N C E
• Tiling to heated concrete or cement/sand screeds
• Internal floors
Heated concrete orcement/sand screed(thermally cycled)
Floor tiles
Multi-purpose flexible, all tile types:ARDEX X 7 G PLUS
Multi-purpose, rapidset flexible,all tile types:ARDEX X 7 R
MICROTEC® Ultra Rapid SettingFlexible Floor Tile Adhesive, largeformat tiles:ARDEX X 78 S
DRY AREASWET AREAS
ARDEX WPC
Floor Tiling System 11
Wide joints:ARDEX-FLEX FL
Narrow joints:ARDEX-FLEX FS
NARROWJOINTS
WIDEJOINTS
43
NOTE: For natural stone tiling refer to the‘ARDEX Natural Stone Tiling Guide’.
Further guidance on the fixing of specificproprietary tile backing boards is describedin the relevant ARDEX/Wedi,ARDEX/Marmox or ARDEX/Kerdiapplication leaflets.
P R E M I U M P E R F O R M A N C E
• Tiling to proprietary tile backing boards
• Internal floors
Floor Tiling System 12
Proprietary tilebacking board
Floor tiles
Multi-purpose flexible, all tile types:ARDEX X 7 G PLUS
Multi-purpose, rapidset flexible,all tile types:ARDEX X 7 R
MICROTEC® Ultra Rapid SettingFlexible Floor Tile Adhesive, largeformat tiles:ARDEX X 78 S
Wide joints:ARDEX-FLEX FL
Narrow joints:ARDEX-FLEX FS
NARROWJOINTS
WIDEJOINTS
44
In industrial areas where heavy impacts andloads occur or where corrosive liquid lies on thetiles, bed and grout in ARDEX WA.
NOTE: For natural stone tiling refer to the‘ARDEX Natural Stone Tiling Guide’.
If smoothing or falls are required prior to tilingthe use of ARDEX S 21 or ARDEX EB 2 shouldbe considered.
See notes on Page 31 regarding suitability andpreparation cement/sand screeds prior to tiling.
P R E M I U M P E R F O R M A N C E
• Tiling of industrial areas, chemically resistant or hygienic joints
• Internal floors
Concrete orcement/sand screed
Floor tiles
Multi-purpose flexible, all tile types:ARDEX X 7 G PLUS
Multi-purpose, rapidset flexible,all tile types:ARDEX X 7 R
MICROTEC® Ultra Rapid SettingFlexible Floor Tile Adhesive, largeformat tiles:ARDEX X 78 S
ARDEX WA epoxide groutand epoxide adhesive
Full chemical resistanceChemical/hygienic joints
Floor Tiling System 13
ARDEX DPM(2 coat coloured system)
45
P R E M I U M P E R F O R M A N C E
• Tiling to damp concrete or cement/sand screed toinclude surface damp proof membrane
• Internal floors
Existing damp concreteor cement/sand screed
New Floor tiles
Floor Tiling System 14
NOTE: For natural stone tiling refer to the‘ARDEX Natural Stone Tiling Guide’.
See notes on Page 31 regarding suitabilityand preparation of concrete orcement/sand screeds prior to tiling.
Wide joints:ARDEX-FLEX FL
Narrow joints:ARDEX-FLEX FS
NARROWJOINTS
WIDEJOINTS
ARDEX P 82
Multi-purpose flexible, all tile types:ARDEX X 7 G PLUS
Multi-purpose, rapidset flexible,all tile types:ARDEX X 7 R
MICROTEC® Ultra Rapid SettingFlexible Floor Tile Adhesive, largeformat tiles:ARDEX X 78 S
46
Floor Tiling System 15
P R E M I U M P E R F O R M A N C E
• Tiling to concrete or cement/sand screed
• External floors
Concrete orcement/sand screed
Floor tiles
Multi-purpose flexible, all tile types:ARDEX X 7 G PLUS
Multi-purpose, rapidset flexible,all tile types:ARDEX X 7 R
MICROTEC® Ultra Rapid SettingFlexible Floor Tile Adhesive, largeformat tiles:ARDEX X 78 S
*NOTE: When fixing fully vitrified or porcelaintiles in external situations use either ARDEX X 77,ARDEX X 7 R, ARDEX X 78 S.
NOTE: For natural stone tiling refer to the‘ARDEX Natural Stone Tiling Guide’.
If smoothing or screeding of the sub-floor isrequired prior to tiling the use of ARDEX K 301,A 46, S 21 or ARDEX EB 2 should be considered.
See notes on page 31 regarding suitability andpreparation of concrete or cement/sand screedsprior to tiling.
Wide joints:ARDEX-FLEX FL
Narrow joints:ARDEX-FLEX FS
NARROWJOINTS
WIDEJOINTS
47
*NOTE: When fixing fully vitrified orporcelain tiles in external situations useeither ARDEX X 77, ARDEX X 7 R,ARDEX X 78 S.
NOTE: For natural stone tiling refer to the‘ARDEX Natural Stone Tiling Guide’.
See notes on Page 31 regarding suitabilityand preparation of existing ceramic tilesprior to tiling.
P R E M I U M P E R F O R M A N C E
• Tiling to existing glazed/unglazed floor tiles
• External floors
Existingtiles
Floor tiles
ARDEX X 7 + ARDEX E 90
ARDEX S 21 + ARDEX E 90
Wide joints:ARDEX-FLEX FL
Narrow joints:ARDEX-FLEX FS
NARROWJOINTS
WIDEJOINTS
Floor Tiling System 16
Multi-purpose flexible, all tile types:ARDEX X 7 G PLUS
Multi-purpose, rapidset flexible,all tile types:ARDEX X 7 R
MICROTEC® Ultra Rapid SettingFlexible Floor Tile Adhesive, largeformat tiles:ARDEX X 78 S
ARDEX P 4
48
Wall Tiling System Selector
These overviews show some of the systems that can be used for various
circumstances. These should only be used in conjunction with the
guidance given in the current ARDEX data sheets for the individual
products shown.
Detailed design data sheets are available for some of the key systems
and site specific guidance can be provided by contacting your local
ARDEX Area Manager or the ARDEX Technical Services Department.
Other combinations of adhesives and grouts may be suitable, please
consult the individual product data sheets for further information.
FLOOR AND WALL TILING, SOLID BED FIXING IS REQUIRED (NO VOIDS
BEHIND TILES) IN EXTERNAL LOCATIONS.
FLOOR TILING IN EXTERNAL LOCATIONS SHOULD PREFERABLY BE
LAID TO FREE DRAINING FALLS.
N.B. All ARDEX products should be mixed and applied in accordance
with the relevant product data sheet.
The use of ARDEX AM 100 Rapid Hardening One Coat Tiling Render
allows tiles to be fixed only 2 hours after application.
A bonded ARDEX EB 2 screed will allow tiles to be fixed only 3 hours
after application.
CONCRETE OR CEMENT/SAND RENDER DRY AREAS
WET AREAS
WALL TILING SYSTEM 1 - P50
WALL TILING SYSTEM 2 - P51
GYPSUM PLASTER DRY AREAS
WET AREAS
WALL TILING SYSTEM 3 - P52
WALL TILING SYSTEM 4 - P53
PLASTERBOARD DRY AREAS
WET AREAS
WALL TILING SYSTEM 5 - P54
WALL TILING SYSTEM 6 - P55
AERATED CONCRETE BLOCK DRY AREAS
WET AREAS
WALL TILING SYSTEM 7 - P56
WALL TILING SYSTEM 8 - P57
GLAZED/UNGLAZED TILES DRY AREAS
WET AREAS
WALL TILING SYSTEM 9 - P58
WALL TILING SYSTEM 10 - P59
WOOD-BASED SHEETS AND BOARDS DRY AREAS
WET AREAS
WALL TILING SYSTEM 11 - P60
WALL TILING SYSTEM 12 - P61
BRICKWORK/CONCRETE BLOCKWORK DRY AREAS
WET AREAS
WALL TILING SYSTEM 13 - P62
WALL TILING SYSTEM 14 - P63
BRICKWORK/CONCRETE BLOCKWORK WALL TILING SYSTEM 15 - P64
SUBSTRATE TO BE TILED
INTERNAL WALLS
SITE CONDITIONS ARDEX SYSTEM
CONCRETE OR CEMENT/SAND RENDER, BRICKWORK/BLOCKWORK WALLS
EXISTING GLAZED/UNGLAZED TILES, GLAZED BRICKS
WALL TILING SYSTEM 16 - P65
WALL TILING SYSTEM 17 - P66
EXTERNAL WALLS
N.B. All ARDEX products should be mixed and applied in accordance with the relevant product data sheet.
49
Background/Substrate Preparation
All backgrounds must be rigid, clean, stable and free from any barriers to
adhesion such as dust, plaster droppings, grease, polish and any water
softenable or loosely adhered materials. Good adhesion to a stable background
is very important to guarantee the successful application of tiling.
Surfaces to be tiled must be flat and when checked with a 2m straight edge,
any gap under the straight edge between points of contact with the surface
should not exceed 3mm (Surface Regularity 1). Any small scale irregularities
should be pre-smoothed before tiling.
* With ARDEX AM 100 Rapid Hardening One Coat Tiling Render tiles can be
fixed only 2 hours after application.
For tiling in dry locations the adhesive coverage should be at least 50%. For
tiling in wet locations solid bed fixing is required (No voids behind tiles).
Primers
ARDEX P 4 - Solvent free primer for internal/external
application to walls, floors and ceilings. Used prior to the
application of ARDEX ceramic tile adhesives and levelling
compounds. Produces textured surface and dries in one
hour. Applied to concrete, cement/sand screeds,
ceramic tiles, terrazzo.
ARDEX P 51 - For use on plaster before fixing with ARDEX
or ARDEX-FLEX cement-based adhesives.
ARDEX P 82 - Non-flammable, water dispersed epoxy
primer for bonding to wood-based surfaces and existing
ceramic tiling prior to the use of cement-based adhesives.
Maximum weight of tiling per square metre is 20kg.
Maximum weight of tiling per square metre is 32kg.
Bed thickness maximum 3mm.
ARDEX WPC Flexible Rapid Drying and Setting Waterproof Coating
Can be used to protect moisture sensitive backgrounds in
domestic/commercial wet locations, prior to fixing tiles using
ARDEX D30 or the appropriate ARDEX cement-based adhesive.
Internal Walls
CONCRETEAllow at least 6 weeks drying time prior to fixing new tiles onto new
concrete. Ensure mould oil and curing agents are removed.
CEMENT/SAND RENDERWood float finish and prevent rapid drying of the surface for 1 to 2 days.
Allow to air dry for at least two weeks prior to tiling.*
GYPSUM PLASTERDo not use in wet or damp conditions, must be dry and at least 4 weeks
old. Brush down surface prior to tiling. Where required use ARDEX P 51
primer.
PLASTERBOARDEnsure boards are rigidly braced and adequately supported; fix directly to
the paper facing. Do not skim with plaster.
AERATED CONCRETEAllow at least 6 weeks drying time for new walls before tiling or rendering.
Render should not exceed 13mm in thickness.
EXISTING CERAMIC TILINGEnsure existing tiling is well adhered and can support the new tile bed.
Thorough cleaning and rinsing off essential. In dry locations where
required use ARDEX P 82 / ARDEX P 4 primer.
WOOD-BASED BOARDSAvoid if possible, refer to BS 5385:Part 1. If installed, the boards must be
dry and conditioned to the correct moisture content and their backs and
edges suitably sealed prior to being rigidly fixed. Where required use
ARDEX P 82 primer.
COMPOSITE BOARDSCheck with manufacturer for guidance on dimensional stability.
Priming or surface preparation may be required.
BRICKWORKAllow new walls to dry for at least 6 weeks prior to direct fixing or
rendering.
CONCRETE BLOCKWORKNew walls should be built with dry blocks. Allow 6 weeks drying time
before direct fixing or rendering.
WET LOCATIONSBackgrounds should be water-resistant and suitable for direct fixing. Tiles
should be solid bed fixed.
1
1
2
2
3
3
3
3
3
3
3
4
4
External Walls
CEMENT/SAND RENDER AND SCREEDWood float finish and prevent rapid drying out. Allow to air dry for at least 2
weeks (renders) or at least 3 weeks (screeds) prior to tiling.*
CONCRETEAllow at least 6 weeks drying time prior to fixing tiles onto new concrete.
Ensure all formwork release agents are removed.
EXISTING CERAMIC TILINGEnsure existing tiling is well adhered and can support the new tile bed.
Thorough cleaning and rinsing off essential.
BRICKWORKAllow new walls to dry for at least 6 weeks prior to direct fixing or rendering.
Wall Tiling - Background/Substrate Preparation
50
Wall Tiling System 1
Wide joints:ARDEX-FLEX FL
Narrow joints:ARDEX-FLEX FS
NARROWJOINTS
WIDEJOINTS
NOTE: For natural stone tiling refer to the‘ARDEX Natural Stone Tiling Guide’.
See notes on Page 49 regarding suitabilityand preparation of concrete orcement/sand renders to receive ceramicwall tiling.
P R E M I U M P E R F O R M A N C E
• Tiling to concrete or cement/sand render - dry areas
• Internal walls
Concrete orcement/sand render
Multi-purpose, ready mixed:ARDEX D 20 - maximum tile size 300mm x 300mm
Multi-purpose cement-based:ARDEX X 7 G PLUS
MICROTEC® Flexible Floor and Wall Tile Adhesive:ARDEX X 77 W
Rapid set flexible:ARDEX X 7 R / ARDEX X 7 R W
Wall tiles
51
NOTE: For natural stone tiling refer to the‘ARDEX Natural Stone Tiling Guide’.
See notes on Page 49 regarding suitabilityand preparation of concrete orcement/sand renders to receive ceramicwall tiling.
NOTE: The use of the ARDEX waterproofcoatings will only prevent moisture ingressfrom the tiled side of the background.
Commercial or domestic location
Concrete orcement/sand render
ARDEX WPC
Multi-purpose, ready mixed for commercial wet areas:ARDEX D 30 (absorbent tiles only on ARDEX WPCmaximum tile size 300mm x 300mm)
Multi-purpose cement-based:ARDEX X 7 G PLUS
MICROTEC® Flexible Floor and Wall Tile Adhesive:ARDEX X 77 W
Rapid set flexible:ARDEX X 7 R / ARDEX X 7 R W
P R E M I U M P E R F O R M A N C E
• Tiling to concrete or cement/sand render - wet areas
• Internal walls
Wall tiles
Wall Tiling System 2
Wide joints:ARDEX-FLEX FL
Narrow joints:ARDEX-FLEX FS
NARROWJOINTS
WIDEJOINTS
52
Wall Tiling System 3
NOTE: For natural stone tiling refer to the‘ARDEX Natural Stone Tiling Guide’.
See notes on Page 49 regarding suitabilityand preparation of plaster to receiveceramic wall tiling.
P R E M I U M P E R F O R M A N C E
• Tiling to gypsum plaster - dry areas
• Internal walls
Plaster
ARDEX P 51 (Dilute 1:3)
Wall tiles
Multi-purpose cement-based:ARDEX X 7 G PLUS
MICROTEC® Flexible Floor and Wall Tile Adhesive:ARDEX X 77 W
Rapid set flexible:ARDEX X 7 R / ARDEX X 7 R W
Multi-purpose, ready mixed:ARDEX D 20 - maximum tile size 300mm x 300mm
Wide joints:ARDEX-FLEX FL
Narrow joints:ARDEX-FLEX FS
NARROWJOINTS
WIDEJOINTS
53
NOTE: For natural stone tiling refer to the‘ARDEX Natural Stone Tiling Guide’.
See notes on Page 49 regarding suitabilityand preparation of plaster to receiveceramic wall tiling.
NOTE: The use of the ARDEX waterproofcoatings will only prevent moisture ingressfrom the tiled side of the background.
P R E M I U M P E R F O R M A N C E
• Tiling to gypsum plaster - areas prone to intermittent splashing
• Internal wallsNote: if at all possible avoidgypsum plaster in wet areas
Commercial or domestic location
PlasterARDEX WPC
Multi-purpose, ready mixed for commercial wet areas:ARDEX D 30 (absorbent tiles only, maximum tile size 300mm x 300mm)
Multi-purpose cement-based:ARDEX X 7 G PLUS
MICROTEC® Flexible Floor and Wall Tile Adhesive:ARDEX X 77 W
Rapid set flexible:ARDEX X 7 R / ARDEX X 7 R W
Wall tiles
Wall Tiling System 4
Wide joints:ARDEX-FLEX FL
Narrow joints:ARDEX-FLEX FS
NARROWJOINTS
WIDEJOINTS
54
Wall Tiling System 5
NOTE: For natural stone tiling refer to the‘ARDEX Natural Stone Tiling Guide’.
See notes on Page 49 regarding suitabilityand preparation of plasterboard to receiveceramic wall tiling.
P R E M I U M P E R F O R M A N C E
• Tiling to plasterboard - dry areas
• Internal walls
Plasterboard
Wall tiles
Multi-purpose, ready mixed:ARDEX D 20 - maximum tile size 300mm x 300mm
Multi-purpose cement-based:ARDEX X 7 G PLUS
MICROTEC® Flexible Floor and Wall Tile Adhesive:ARDEX X 77 W
Rapid set flexible:ARDEX X 7 R / ARDEX X 7 R W
Wide joints:ARDEX-FLEX FL
Narrow joints:ARDEX-FLEX FS
NARROWJOINTS
WIDEJOINTS
55
NOTE: For natural stone tiling refer to the ‘ARDEX NaturalStone Tiling Guide’.
See notes on Page 49 regarding suitability and preparation ofplasterboard to receive ceramic wall tiling.
NOTE: The use of the ARDEX waterproof coatings will onlyprevent moisture ingress from the tiled side of the background.
NOTE: The adhesives below, including ARDEX D 30 can beapplied directly to moisture resistant plasterboard in domesticshowers, omitting the use of a waterproof coating.
P R E M I U M P E R F O R M A N C E
• Tiling to moisture resistant plasterboard - wet areas (showers)
• Internal walls
Commercial or domestic location
PlasterboardARDEX WPC
Multi-purpose, ready mixed for commercialwet areas:ARDEX D 30 (absorbent tiles only, maximum tile size 300mm x 300mm)
Multi-purpose cement-based:ARDEX X 7 G PLUS
MICROTEC® Flexible Floor and Wall Tile Adhesive:ARDEX X 77 W
Rapid set flexible:ARDEX X 7 R / ARDEX X 7 R W
Wall tiles
Wall Tiling System 6
Wide joints:ARDEX-FLEX FL
Narrow joints:ARDEX-FLEX FS
NARROWJOINTS
WIDEJOINTS
56
Wall Tiling System 7
NOTE: For natural stone tiling refer to the‘ARDEX Natural Stone Tiling Guide’.
See notes on Page 49 regarding suitability andpreparation of aerated concrete blocks toreceive ceramic wall tiling.
NOTE: If the aerated concrete blockwork is notsuitably flat to receive ceramic tiling, the use ofARDEX AM 100 Rapid Hardening One CoatTiling Render should be considered.
P R E M I U M P E R F O R M A N C E
• Tiling to aerated concrete blocks - dry areas
• Internal walls
Aerated concreteblockwork
Wall tiles
Multi-purpose, ready mixed:ARDEX D 20 - maximum tile size 300mm x 300mm
Multi-purpose cement-based:ARDEX X 7 G PLUS
MICROTEC® Flexible Floor and Wall Tile Adhesive:ARDEX X 77 W
Rapid set flexible:ARDEX X 7 R / ARDEX X 7 R W
Wide joints:ARDEX-FLEX FL
Narrow joints:ARDEX-FLEX FS
NARROWJOINTS
WIDEJOINTS
57
NOTE: For natural stone tiling refer to the‘ARDEX Natural Stone Tiling Guide’.
See notes on Page 49 regarding suitability andpreparation of aerated concrete blocks toreceive ceramic wall tiling.
NOTE: If the aerated concrete blockwork is notsuitably flat to receive ceramic tiling, the use ofARDEX AM 100 Rapid Hardening One CoatTiling Render should be considered.
P R E M I U M P E R F O R M A N C E
• Tiling to aerated concrete blocks - wet areas
• Internal walls
Aerated concreteblockwork
Wall tiles
Commercial or domestic location
ARDEX WPC
Multi-purpose, ready mixed for commercial wet areas:ARDEX D 30 (absorbent tiles only, maximum tile size 300mm x 300mm)
Multi-purpose cement-based:ARDEX X 7 G PLUS
MICROTEC® Flexible Floor and Wall Tile Adhesive:ARDEX X 77 W
Rapid set flexible:ARDEX X 7 R / ARDEX X 7 R W
Wall Tiling System 8
Wide joints:ARDEX-FLEX FL
Narrow joints:ARDEX-FLEX FS
NARROWJOINTS
WIDEJOINTS
58
Wall Tiling System 9
NOTE: For natural stone tiling refer to the‘ARDEX Natural Stone Tiling Guide’.
See notes on Page 49 regarding suitabilityand preparation of existing ceramic walltiling to receive new tiles.
Option A or B can be used depending iffixing directly or if priming is preferred.
P R E M I U M P E R F O R M A N C E
• Tiling to glazed/unglazed tiles - dry areas
• Internal walls
Existing tiles
Multi-purpose cement-based:ARDEX X 7 G PLUS
MICROTEC® Flexible Floor and Wall Tile Adhesive:ARDEX X 77 W
Rapid set flexible:ARDEX X 7 R / ARDEX X 7 R W
Multi-purpose,ready mixed:ARDEX D 20(absorbent tiles only,maximum tile size 300mm x 300mm)
Wall tiles
AB
Wide joints:ARDEX-FLEX FL
Narrow joints:ARDEX-FLEX FS
NARROWJOINTS
WIDEJOINTS
ARDEX P 4
59
NOTE: For natural stone tiling refer to the‘ARDEX Natural Stone Tiling Guide’.
See notes on Page 49 regarding suitabilityand preparation of existing ceramic walltiles to receive new tiles.
P R E M I U M P E R F O R M A N C E
• Tiling to glazed/unglazed tiles - wet areas
• Internal walls
Existing tiles
Wall tiles
Multi-purpose, ready mixed for commercial wetareas not submerged i.e. swimming pools:ARDEX D 30 (absorbent tiles only, maximum tile size 300mm x 300mm)
ARDEX X 7 + ARDEX E 90(can be used in swimming pool refurbishment)
Wall Tiling System 10
Wide joints:ARDEX-FLEX FL
Narrow joints:ARDEX-FLEX FS
NARROWJOINTS
WIDEJOINTS
60
Wall Tiling System 11
NOTE: For natural stone tiling refer to the‘ARDEX Natural Stone Tiling Guide’.
See notes on Page 49 regarding suitabilityand preparation of wood-based boards toreceive ceramic wall tiling.
P R E M I U M P E R F O R M A N C E
• Tiling to wood-based sheets and boards - dry areas
• Internal walls
Wood-based board
Multi-purpose cement-based:ARDEX X 7 G PLUS
MICROTEC® Flexible Floor and Wall Tile Adhesive:ARDEX X 77 W
Rapid set flexible:ARDEX X 7 R / ARDEX X 7 R W
Multi-purpose,ready mixed:ARDEX D 20(absorbent tiles only,maximum size300mm x 300mm)
Wall tiles
ARDEX P 82
Wide joints:ARDEX-FLEX FL
Narrow joints:ARDEX-FLEX FS
NARROWJOINTS
WIDEJOINTS
61
NOTE: For natural stone tiling refer to the‘ARDEX Natural Stone Tiling Guide’.
See notes on Page 49 regarding suitability andpreparation of wood-based boards to receiveceramic wall tiling.
NOTE: The use of the ARDEX waterproofcoatings will only prevent moisture ingress fromthe tiled side of the background.
P R E M I U M P E R F O R M A N C E
• Tiling to wood-based sheets and boards - wet areas
• Internal wallsNote: wood-based sheets and boards should not be used in wet locations, if they cannot be removedoversheet with moisture resistant plasterboard and treat as System 6. If not possible consider this system in domestic locations only.
Heavy use domestic location
Wood-based board
ARDEX WPC
Multi-purpose, ready mixed for commercialwet areas:ARDEX D 30(absorbent tiles only, maximum tile size 300mm x 300mm)
Multi-purpose cement-based:ARDEX X 7 G PLUS
MICROTEC® Flexible Floor and Wall Tile Adhesive:ARDEX X 77 W
Rapid set flexible:ARDEX X 7 R / ARDEX X 7 R W
Wall tiles
Wall Tiling System 12
Wide joints:ARDEX-FLEX FL
Narrow joints:ARDEX-FLEX FS
NARROWJOINTS
WIDEJOINTS
62
Wall Tiling System 13
NOTE: For natural stone tiling refer to the‘ARDEX Natural Stone Tiling Guide’.
See notes on Page 49 regarding suitability andpreparation of brickwork and concreteblockwork to receive ceramic wall tiling.
NOTE: If the concrete blockwork is not suitablyflat to receive ceramic tiling, the use of ARDEXAM 100 Rapid Hardening One Coat TilingRender should be considered.
P R E M I U M P E R F O R M A N C E
• Tiling to brickwork/concrete blockwork - dry areas
• Internal walls
Brickwork/concreteblockwork
Wall tiles
Multi-purpose, ready mixed:ARDEX D 20 - maximum tile size 300mm x 300mm
Multi-purpose cement-based:ARDEX X 7 G PLUS
MICROTEC® Flexible Floor and Wall Tile Adhesive:ARDEX X 77 W
Rapid set flexible:ARDEX X 7 R / ARDEX X 7 R W
Wide joints:ARDEX-FLEX FL
Narrow joints:ARDEX-FLEX FS
NARROWJOINTS
WIDEJOINTS
63
NOTE: For natural stone tiling refer to the‘ARDEX Natural Stone Tiling Guide’.
See notes on Page 49 regarding suitability andpreparation of brickwork and concreteblockwork to receive ceramic wall tiling.
NOTE: If the concrete blockwork is not suitablyflat to receive ceramic tiling, the use of ARDEXAM 100 Rapid Hardening One Coat TilingRender should be considered.
P R E M I U M P E R F O R M A N C E
• Tiling to brickwork/concrete blockwork - wet areas (showers)
• Internal walls
Brickwork/concreteblockwork
Wall tiles
Heavy use domestic/commercial location
ARDEX WPC
Multi-purpose, ready mixed for commercial wet areas:ARDEX D 30 (absorbent tiles only, maximum tile size 300mm x 300mm)
Multi-purpose cement-based:ARDEX X 7 G PLUS
MICROTEC® Flexible Floor and Wall Tile Adhesive:ARDEX X 77 W
Rapid set flexible:ARDEX X 7 R / ARDEX X 7 R W
Wall Tiling System 14
Wide joints:ARDEX-FLEX FL
Narrow joints:ARDEX-FLEX FS
NARROWJOINTS
WIDEJOINTS
64
Wall Tiling System 15
NOTE: For natural stone tiling refer to the‘ARDEX Natural Stone Tiling Guide’.
Further guidance on the fixing of specificproprietary tile backing board is described in the relevant ARDEX/Wedi, ARDEX/Marmox,or ARDEX/Kerdi application leaflet.
NOTE: Some proprietary tile backing boards arenot impervious to water, hence in wet areasARDEX WPC may need to be used.
P R E M I U M P E R F O R M A N C E
• Tiling to proprietary tile backing boards
• Internal walls
Proprietary tilebacking board
Wall tiles
Multi-purpose, ready mixed for commercial wet areas:ARDEX D 30 (absorbent tiles only, maximum tile size 300mm x 300mm)
Multi-purpose cement-based:ARDEX X 7 G PLUS
MICROTEC® Flexible Floor and Wall Tile Adhesive:ARDEX X 77 W
Rapid set flexible:ARDEX X 7 R / ARDEX X 7 R W
Wide joints:ARDEX-FLEX FL
Narrow joints:ARDEX-FLEX FS
NARROWJOINTS
WIDEJOINTS
65
NOTE: For natural stone tiling refer to the ‘ARDEX NaturalStone Tiling Guide’.
See notes on Page 49 regarding suitability and preparation ofbrickwork and concrete, cement/sand render, brickwork andblockwork to receive ceramic wall tiling.
NOTE: If the backgrounds are not suitably flat to receiveceramic tiling, the use of ARDEX AM 100 Rapid HardeningOne Coat Tiling Render should be considered.
*NOTE: When fixing fully vitrified or porcelain tiles in externalsituations use ARDEX X 77.
P R E M I U M P E R F O R M A N C E
• Tiling to concrete or cement/sand render,
brickwork/blockwork walls
• External walls
Concrete/cement and sandrender/brickwork/blockwork
Wall tiles
Multi-purpose cement-based:ARDEX X 7 G PLUS*
MICROTEC® Flexible Floor and Wall Tile Adhesive:ARDEX X 77 W
Rapid set flexible:ARDEX X 7 R / ARDEX X 7 R W
Wall Tiling System 16
Wide joints:ARDEX-FLEX FL
Narrow joints:ARDEX-FLEX FS
NARROWJOINTS
WIDEJOINTS
66
Wall Tiling System 17
NOTE: For natural stone tiling refer to the‘ARDEX Natural Stone Tiling Guide’.
See notes on Page 49 regarding suitabilityand preparation of existing tiling or glazedbricks to receive ceramic wall tiling.
*NOTE: When fixing fully vitrified orporcelain tiles in external situations useARDEX X 77.
P R E M I U M P E R F O R M A N C E
• Tiling to existing glazed/unglazed tiles, glazed bricks
• External walls
Wall tiles
Existing tiles/glazed bricksARDEX X 7+ ARDEX E 90
Wide joints:ARDEX-FLEX FL
Narrow joints:ARDEX-FLEX FS
NARROWJOINTS
WIDEJOINTS
Multi-purpose cement-based:ARDEX X 7 G PLUS*
MICROTEC® Flexible Floor and Wall Tile Adhesive:ARDEX X 77 W
Rapid set flexible:ARDEX X 7 R / ARDEX X 7 R W
ARDEX P 4
PRODUCTS
ARDEX C2
ARDEX F4
ARDEX GK
ARDEX MG*
ARDEX-FLEX FS
ARDEX-FLEX FL
ARDEX WA
Wall
Tilin
g
Floo
r Tili
ng
Heav
y Ped
estri
an Tr
affic
Inte
rnal
Loc
atio
ns
Exte
rnal
Loc
atio
ns
Wet I
nter
nal L
ocat
ions
Swim
min
g Po
ols (
Bala
nced
wat
er)
Swim
min
g Po
ols (
Aggr
essiv
e wa
ter)
Aggr
essiv
e Sp
illag
es
Heav
y Ind
ustri
al
Early
Traf
fic
Abat
toirs
Dairi
es
High
Hyg
iene
Are
as (F
ood
prep
arat
ion)
Abra
sive
Cond
ition
s
Grou
t Cov
erag
e Fi
gure
GROUT SELECTOR TABLESITUATION
KEY:Recommended
Addition of ARDEX E 101 for waterrepellent joints
1.7
1.5
1.8
1.45
1.5
1.75
1.5
(length + breadth) x width x depth
length x breadthx G.C.F. = kg/m2
(300 + 300) x 10 x 10
300 x 300x 1.75 = 1.16kg/m2
* If the tiles/slabs to be grouted are prone to moisture absorption and have been fixed with either ARDEX S 16/S 16 W, ARDEX X 7001/X 7001 W or ARDEX S 20/S 20 Wrapiddrying adhesives, we advise grouting is also carried out using ARDEX MG Rapid Drying Marble and Natural Stone Grout to minimise the risk of moisture staining to the tile edges.
Quick and easy grout coverage can be calculated using thecement and epoxy based grout calculator at ARDEX online:www.ardex.co.uk/calculator.asp
COVERAGEThis will depend upon tile size, joint width, depth and theGrout Coverage Figure (G.C.F.). Use the following to estimatethe approximate grout requirements for square or rectangulartiles (all dimensions in mm):
Stage 1. ADD length and breadth of tile together.2. MULTIPLY result by joint width.3. MULTIPLY result by joint depth.4. MULTIPLY result by the Grout Coverage Figure (G.C.F).5. DIVIDE result by length of tile.6. DIVIDE result by breadth of tile.The result is the material requirement in kg per sq metre.
SUMMARYMaterial required is:-
EXAMPLE Using ARDEX-FLEX FL
Tiles 300mm x 300mm x 10mm; joints of 10mm:-
Thus one 10kg bag of ARDEX-FLEX FL will grout up to 8.6m2 of tiling.
67
Grout Selector and Coverage Table
ARDEX-FLEX cement-based grouts are designed for use where the highest levels of protection are required for cement-based grouts.
ARDEX-FLEX FLRapid setting, flexible, water repellent cement-based grout for floor and wall tile joints from 3-15mm wide in internal and external locations including swimming pools.
ARDEX-FLEX FSWater repellent and dirt resistant, flexible grout. Easy to apply and to clean off, suitable for use in internal and external locations, swimming pools, etc. For wall and floor tile
joints up to 4mm wide.
ARDEX-FLEX TILING GROUTS COLOUR GUIDE
Due to printing processes, colours shown are approximate. Grout colours may vary when dry, depending on type of tile installed, substrate and installation conditions.
01
Brilliant White
02
Blossom White
03
Antique Ivory
04
Spring Jasmine
05
Gentle Dawn
06
Natural Almond
07
Classic Vanilla
08
Floating Driftwood
09
Fresh Snowdrop
10
Gentle Blush
11
Stone Beach
12
Barley Sugar
13
Fresh Magnolia
14
Wild Mushroom
15
Oyster Pink
16
Organic Earth
17
Dove Grey
18
Silver Shimmer
19
Ocean Grey
20
Slate Grey
21
Pebble Drift
22
Grey Dusk
23
Stormy Mist
24
Cast Iron
25
Innocent Black
26
Coffee Bean
27
Ground Cocoa
28
Burnt Orange
29
Winter White
30
Spring Green
31
Summer Yellow
32
Autumn Red
68
Grout Colours Guide
ARDEX TILING GROUTS COLOUR GUIDE
ARDEX cement-based grouts have a proven record for being versatile and reliably meeting all manner of 'everyday' tiling requirements.
ARDEX C2 - For joint widths from 2mm upwards, suitable for wall and floor tiling in internal and external situations, swimming pools, etc.
Grey
Sandstone
White
Anthracite
Limestone Beige
Light Grey
Sandstone
Dark Grey White Limestone
ARDEX F4 - Fine grout for internal and external use, including swimming pools etc., for joints up to 4mm wide. Easy to apply and clean off. Walls only.
Polar White Light Grey Beige
ARDEX GK - Rapid setting and hardening grout for internal and external use, for joint widths from 3mm upwards. Suitable for floor and wall tile joints.
Grey Anthracite
ARDEX epoxide-based grout is used for specialist applications because of its high strength and chemical resistance.
ARDEX WA - Adhesive and grout for wall and floor tile joints from 2-12mm wide. Use where high standards of hygiene and cleanliness are required, solvent free, waterproof
and frost resistant. Ideal for swimming pools and wet areas.
White Grey
ARDEX MG - Rapid drying grout suitable for natural stone or marble wall or floor tile joints up to 8mm wide, with reduced risk of water staining to the tile edge.
When mixed with water, it produces a soft, creamy, easily worked mortar with good filling properties, enabling deep joints to be filled in one operation.
69
Grout Colours Guide
Concrete
Concrete base
ARDEX AM 100Rapid HardeningOne Coat Tiling Render
ARDEX X 77MICROTEC® Flexible Floor and Wall Tile Adhesive
1
ARDEX X 77MICROTEC® Flexible Floor and Wall TileAdhesive
ARDEX X 78 SMICROTEC® UltraRapid Setting FlexibleFloor Tile Adhesive
or
70
1 2
3
The ARDEX Pool System
Walls - PreparationThe diagram shows the use of ARDEX AM 100 which is a wall render applied 2 - 20mm thick and will allowtiling to commence after 2 hours at 20°C.
Walls - Tile FixingThe wall tiles or mosaics can then be fixed with ARDEX X 77 (grey) or ARDEX X 77 W (white) adhesiveensuring solid bedding is achieved.
Floors - PreparationThe diagram shows the use of either ARDEX S 21 neat, ARDEX S 21 and theincorporation of screeding sand or a bonded ARDEX EB 2 screed to make upscreed levels to falls, if required, on a concrete base prior to ceramic floor tiling.
Floors - Tile FixingThe floor tiles or mosaics can then be fixed after 3hours at 20°C with ARDEX X 77 or ARDEX X 78 Sensuring solid bedding is achieved.
Refer to BS 5385-4:2009 regarding timescalesfor stages of work, pool filling times, etc.Where time is short consult ARDEX TechnicalServices for assistance on 01440 714939.
Concrete
ARDEX-FLEX FS*Flexible Tile Grout with Built-In Admix1 - 4mm joints
*Balanced water conditions. In areas of aggressive waterconditions consider the use of an epoxide grout/adhesive.
ARDEX-FLEX FL*Rapid Setting FlexibleCement- BasedGrouting Compound3 - 15mm joints
ARDEX EB 2Rapid Hardening Cement for
Floor Screeds
Cement/Sand Screed, 20 - 50mm
ARDEX B 2Fast Setting Screed
Bonding Cement System
P R E M I U M P E R F O R M A N C E
or
The information supplied in our literature or given by our employees is based upon extensive experience and, together with thatsupplied by our agents or distributors, is given in good faith in order to help you.
We guarantee the consistent high quality of our products; however, as we have no control over site conditions or the execution of the work, we accept no liability for any loss or damage which may arise as a result thereof.
For detailed information and advice please visit www.ardex.co.uk
or call our Technical Services Department on 01440 714939.
Option 3
3
2
Option 2
ARDEX S 21Rapid Hardening Floor Tile Bedding Mortar
Neat, 0 - 10mm
Option 1
A
B
B
A
ARDEX S 21Rapid Hardening Floor Tile Bedding Mortar
Sand Filled Screed, 10 - 30mmand Bonding Coat
Concrete
Concrete base
ARDEX AM 100Rapid HardeningOne Coat Tiling Render
ARDEX X 77MICROTEC® Flexible Floor and Wall Tile Adhesive
1
ARDEX X 77MICROTEC® Flexible Floor and Wall TileAdhesive
ARDEX X 78 SMICROTEC® UltraRapid Setting FlexibleFloor Tile Adhesive
or
1 2
3
Movement Joints
ARDEX WPCWaterproof Protection System
For Timber Floors
Refer to the ARDEX Schlüter Timber Floor System
or Wedi/Marmox data sheet.72
The ARDEX Wet Room System
Walls - PreparationThe diagram shows the use of ARDEX AM 100 which is a wall render applied 2 - 20mm thick.This will allow tiling to commence after 2 hours at 20°C.
Walls - Tile FixingThe wall tiles or mosaics can then be fixed with ARDEX X 77 (grey) or ARDEX X 77 W (white)adhesive ensuring solid bedding is achieved.
Floors - PreparationThe diagram shows the use of either ARDEX S 21 neat, ARDEX S 21 and theincorporation of screeding sand or a bonded ARDEX EB 2 screed to make upscreed levels to falls, if required, on a concrete base prior to ceramic floor tiling.
Floors - Tile FixingThe floor tiles or mosaics can then be fixed after 3 hours at 20°Cwith ARDEX X 77 or ARDEX X 78 S ensuring solidbedding is achieved.
Concrete
ARDEX-FLEX FSFlexible Tile Grout with Built-In Admix1 - 4mm joints
ARDEX-FLEX FLRapid Setting FlexibleCement- BasedGrouting Compound3 - 15mm joints
ARDEX EB 2Rapid Hardening Cement for
Floor Screeds
Cement/Sand Screed, 20 - 50mm
ARDEX B 2Fast Setting Screed
Bonding Cement System
or
The information supplied in our literature or given by our employees is based upon extensive experience and, together with thatsupplied by our agents or distributors, is given in good faith in order to help you.
We guarantee the consistent high quality of our products; however, as we have no control over site conditions or the execution of the work, we accept no liability for any loss or damage which may arise as a result thereof.
For detailed information and advice please visit www.ardex.co.uk
or call our Technical Services Department on 01440 714939.
Option 3
3
2
Option 2
ARDEX S 21Rapid Hardening Floor Tile Bedding Mortar
Neat, 0 - 10mm
Option 1
A
B
B
A
ARDEX S 21Rapid Hardening Floor Tile Bedding Mortar
Sand Filled Screed, 10 - 30mmand Bonding Coat
P R E M I U M P E R F O R M A N C E
British Standards
British StandardsThe advice given in this publication is based on the following British
Standard Codes of Practice and should be referred to if further guidance
is required.
BS 5385-1:2009Wall and floor tilingPart 1: Design and installation of ceramic natural stone and mosaic walltiling in normal conditions - Code of practice.
BS 5385-2:2006Wall and floor tilingPart 2: Design and installation of external ceramic and mosaic wall tilingin normal conditions - Code of practice.
BS 5385-3:2007Wall and floor tilingPart 3: Design and installation of internal and external ceramic andmosaic floor tiling in normal conditions - Code of practice.
BS 5385-4:2009Wall and floor tilingPart 4: Design and installation of ceramic and mosaic tiling in specialconditions - Code of practice.
BS 5385-5:2009Wall and floor tilingPart 5: Design and installation of terrazzo, natural stone andagglomerated stone tile and slab flooring - Code of practice.
BS 8000Workmanship on building sitesPart 11: Code of practice for wall and floor tiling.Section 11.1:1989Part 11.1: Ceramic tiles, terrazzo tiles and mosaics.
BS EN 12004:2007Adhesives for tiles - Requirements, evaluation of conformity, classificationand designation.
BS EN 14411:2006Ceramic tilesDefinitions, classifications, characteristics and marking.
BS EN 13914-1:2005Design, preparation and application of external rendering and internalplastering.
BS 6925:1988Mastic asphalt for building and civil engineering (limestone aggregate)
BS 8204-1:2003 + A1 2009Screeds, bases and in situ floorings.Concrete bases and cementitious levelling screeds to receive floorings -Code of practice.
BS EN 13888:2009Grout for tiles - Requirements, evaluation of conformity, classification anddesignation.
CLASSIFICATION OF TILE ADHESIVESEUROPEAN STANDARDS
EN12004SYMBOL DESCRIPTION
TYPE CLASSC 1 Normal cementitious adhesiveC 1 F Fast-setting cementitious adhesiveC 1 T Normal cementitious adhesive with reduced slipC 1 F T Fast setting adhesive with reduced slipC 2 Improved cementitious adhesive with additional characteristicsC 2 E Improved cementitious adhesive with extended open time and
additional characteristicsC 2 F Improved fast-setting cementitious adhesive with additional
characteristicsC 2 T Improved cementitious adhesive with additional characteristics
and reduced slipC 2 T E Improved cementitious adhesive with additional characteristics,
reduced slip and extended open timeC 2 F T Improved fast-setting cementitious adhesive with additional
characteristics and reduced slipD 1 Normal dispersion adhesiveD 1 T Normal dispersion adhesive with reduced slipD 2 Improved dispersion adhesive with additional characteristicsD 2 T Improved dispersion adhesive with additional characteristics and
reduced slipD 2 T E Improved dispersion adhesive with additional characteristics,
reduced slip and extended open timeR 1 Normal reaction resin adhesiveR 1 T Normal reaction resin adhesive with reduced slipR 2 Improved reaction resin adhesive with additional characteristicsR 2 T Improved reaction resin adhesive with additional characteristics
and reduced slip
EN12002SYMBOL DESCRIPTION
TYPE CLASSC S 1 Deformable adhesiveC S 2 Highly deformable adhesive
BS EN13888:2009SYMBOL DESCRIPTION
TYPE CLASSCG 1 Normal cementitious groutCG 2 W Improved cementitious grout with additional characteristic of
reduced water absorptionCG 2 A Improved cementitious grout with additional characteristic of
high abrasion resistanceCG 2 W A Improved cementitious grout with additional characteristic of
reduced water absorption and high abrasion resistanceRG Reaction resin grout
74
ARDEX Technical Services, ARDEX Customer Services, ARDEX Online
ARDEX online: www.ardex.co.ukThe most regularly updated manufacturer’s web site for the Tiling and Flooring Industry
ARDEX Technical ServicesThe ARDEX Technical Services department is available to
answer any technical queries between 08.30 and 17.00
GMT Monday to Friday.
Call on 01440 714939 for an answer to your technical problem.You can also forward your queries by fax on 01440 716663.Or by email: technical.services@ardex.co.uk.
Or by post:
Technical Services DepartmentARDEX UK LimitedHomefield RoadHaverhill Suffolk CB9 8QPUnited Kingdom
ARDEX Customer ServicesThe ARDEX Customer Services department is available to
answer any queries between 08.30 and 17.00 GMT Monday
to Friday.
Call on 01440 714939 for an answer to your query.You can also forward your queries by fax on 01440 716640.Or by email: info@ardex.co.uk.
Or by post:
Customer Services DepartmentARDEX UK LimitedHomefield RoadHaverhill Suffolk CB9 8QPUnited Kingdom
E V E R Y O N E ’ S G E T T I N G I N T O I T !• Target group oriented navigation
• Stockist locator
• Comprehensive project reference selector
• Full technical or health & safety product data
• Complete product range featured
• Latest news & press releases
• World-wide ARDEX Group web site locator
• Plus FAQ’s, company contacts, corporateinformation and lots more...
NOTE: The information supplied in our literature or given by our employees is based upon extensive experience and together with that supplied by our agents or distributors, is given in good faith in order to helpyou. Our Company policy is one of continuous Research and Development; we therefore reserve the right to update this information at any time without prior notice. We also guarantee the consistent high qualityof our products; however, as we have no control over site conditions or the execution of the work, we accept no liability for any loss or damage which may arise as a result thereof.The colours shown in this catalogue are as faithful as printing processes allow however there may be some variation, please check at point of purchase.
75
ARDEX UK LIMITED
Homefield Road Haverhill
Suffolk CB9 8QP England
Telephone: 01440 714939
Fax: 01440 716640
Technical Services Fax:
01440 716643
Email: info@ardex.co.uk
ARDEX online: www.ardex.co.uk
Tile Adhesives
Tile Grouts
Waterproof Coatings
Levelling Compounds
Tiling Render
Fast Track Floor Screeds
top related