task · task lighting specialising in led solutions tel 09 820 0004 while every effort has been...
Post on 26-Jun-2020
6 Views
Preview:
TRANSCRIPT
INPUT 12-24VDC
RGBW RGB
CCT
DIM ON
Push-Dim
COMIN
TASKLIGHTING
Specialising In LED Solutions
WWW.TASKLIGHTING.CO.NZ TEL 09 820 0004
While every effort has been made to ensure the accuracy of all information provided Task Lighting can not be held responsible for any errors. Task Lighting also reserves the right to modify/delete product details without notice.
APPLICATIONS: # Controlling RGBW, RGB, Dual white & dimming single colour strips.# Lounges, kitchens, bedroom, bathrooms, bars, restaurants etc
NOTE:# See website for range of remote options.# Remote batteries (not supplied).# Remotes need to be synced to the controller.# Controllers and remotes sold separately.
FEATURES: # Control modules can wirelessly relay commands allowing for unlimitted colour syncing from one remote.# PWM (pulse width modulation) output.# Push dimming & control function.# Modes dip switch selectable.
IP20
12-24V
288W
SPECIFICATIONCODE LCRGBWSD-V4-S
WATTS OUTPUT 144W @12V or 288W @24V
AMPS OUTPUT 3Amp x 4Channels (12Amp Total)
OUTPUT MODE Pulse Width Modulation (PWM)
INPUT 12 - 24VDC
DIMMING RANGE 0% - 100%WORKING TEMP -30 to 55degC
IP RATING IP20
CONNECTIONS Covered connector blockEMC EMC compliantRF RANGE 30m if unobstructed
DIMENSIONS
52
52
26
4 Channel
Power Input +ve
Power Input -ve
Push Dim Common
Push Dim Switch
White Output -ve
LED Output +veBlue Output -ve
Green Output -ve
Red Output -ve
DIP Switch Mode Select
4 Channel Controller RGBW, RGB, Tuneable White & Dimmer
Works with a wide rangeof RF remotes
Multi Purpose 3Amp x 4Channel
ControllerLCRGBWSD-V4-S
TASKLIGHTING
Specialising In LED Solutions
WWW.TASKLIGHTING.CO.NZ TEL 09 820 0004
While every effort has been made to ensure the accuracy of all information provided Task Lighting can not be held responsible for any errors. Task Lighting also reserves the right to modify/delete product details without notice.
Dimming Wireless Relaying - Single Zone
Dimming Wireless Relaying - Multiple Zones
30m 30m 30m
30m
30m
30m
Zone 1
Zone 2
NOTE:# The 30m max wireless transmission distance is with unobstructed line of sight. Transmission distances may be significantly less with walls, metal, concrete etc in the way. Other transmission sources such as WiFi & microwaves etc may also reduce the transmission range. Where obstructions and interference sources exist it is recommended that testing the transimiission range before finalising the project and module placement may need to be altered to acheive the desired result. Intermedaitely placed modules with now load can be used as a relay where transmission distances are shortened.
30m
30m
30m
30m
30m
30m
30m
30m
30m
30m
30m
30m30m
30m
30m
30m
Zone 1Zone 2
Zone 2
Zone
3
Zone
3
Zone
7
Zone
7
Zone 4
Zone 4
Zone 4
Zone 5
Zone 5
Zone 6
Zone 6
Zone 6
Zone 8
Zone 8
Zone 8
Zone
130m
TASKLIGHTING
Specialising In LED Solutions
WWW.TASKLIGHTING.CO.NZ TEL 09 820 0004
While every effort has been made to ensure the accuracy of all information provided Task Lighting can not be held responsible for any errors. Task Lighting also reserves the right to modify/delete product details without notice.
W
INPUT 12-24VDCRGBW
Push-Dim
COMIN
1 2ON
RGBW Remote
Push Switch
100-240VAC
Constant Voltage Driver12VDC or 24VDC
RGBW LED Strip
RGBW Wiring Example
RGB Wiring Example
INPUT 12-24VDC
Push-Dim
COMIN
1 2ON
RGB
RGB Remote
Push Switch
100-240VAC
Constant Voltage Driver12VDC or 24VDC
RGB LED Strip
CCT Wiring Example
+CWWW
+CWWW
INPUT 12-24VDC
Push-Dim
COMIN
1 2ON
CCT
CCT Remote
Push Switch
100-240VAC
Constant Voltage Driver12VDC or 24VDC
Dual White LED Strip
Dual White LED Strip
TASKLIGHTING
Specialising In LED Solutions
WWW.TASKLIGHTING.CO.NZ TEL 09 820 0004
While every effort has been made to ensure the accuracy of all information provided Task Lighting can not be held responsible for any errors. Task Lighting also reserves the right to modify/delete product details without notice.
Dim Wiring Example
+
+
+
+INPUT
12-24VDCPush-Dim
COMIN
1 2ON
DIM
Single Colour LED Strip
Single Colour LED Strip
Single Colour LED Strip
Single Colour LED Strip
Dim Remote
Push Switch
100-240VAC
Constant Voltage Driver12VDC or 24VDC
Four rotation speeds selectable10 �ashes = 6 second rotaions, 5 �ashes = 30 second rotaion, 2 �ashes = 1 minute rotaion, 1 �ash = 6 minute rotaion
Colour Rotation
Single Colour
Dual White
RGB
RGBW
Click On/Off
On/Off
On/Off
On/OffClick
Click
Click
Double Click
Double Click
Double Click
Double Click
Long Press (>1s from OFF)
Long Press (>1s from On)
Long Press (>1s from OFF)
Long Press (>1s from On)
Long Press (>1s from OFF)
Long Press (>1s from On)
Long Press (>1s from OFF)
Long Press (>1s from On)
Dimming UP/DOWN
Turn on at 100% or 10% & vice-versa
Dimming UP/DOWN
Dimming UP/DOWN
Turn on at 100% or 10% & vice-versa
Colour temperature UP/DOWN (turn off & back on to return to dimming)
If on colour mode this will change rotation speedIf on white mode this will dim UP/DOWN
Change from colour mode to white mode (RGB fully mixed) & vice-versa
If on colour mode this will START/STOP colour rotationIf on white mode this will dim UP/DOWN
Change between colour mode, white mode (white channel) & colour + white
If on colour mode this will change rotation speedIf on white mode or colour + white mode this will dim white UP/DOWNIf on colour mode this will START/STOP rotationIf on white mode or colour + white mode this will dim white UP/DOWN
Push Switch Functions
TASKLIGHTING
Specialising In LED Solutions
WWW.TASKLIGHTING.CO.NZ TEL 09 820 0004
While every effort has been made to ensure the accuracy of all information provided Task Lighting can not be held responsible for any errors. Task Lighting also reserves the right to modify/delete product details without notice.
Matching Remotes To ControllersUsing Controller DIP SwitchesMatching:Change DIP switch setting & immediately short pres on/off key (single zone remote)or zone key (multi zone remote)
Using Power RestartMatching:From power off switch power on & immediatelyshort press on/off key (single zone remote) orzone key (multi zone remote).The light �ashes 3 times for a successful match.
Deleting:From power off switch power on & immediatelyshort press the on/off key (single zone remote) or zone key (multi zone remote).The light �ashes 5 times for a successful un match.
1
1 0 0
9 0
8 0
7 0
6 0
5 0
4 0
3 0
2 0
1 0
PWM
dut
y(%
)
5 0 6 0
Brightness(%)1 0 2 0 3 0 4 0
Gamma=1.61 0 0
9 0
8 0
7 0
6 0
5 0
4 0
3 0
2 0
1 0
PWM
dut
y(%
)
5 0 6 0 7 0 8 0 9 0 1 0 0
Brightness(%)
1 0 2 0 3 0 4 0
G a mma =1 . 01 0 0
9 0
8 0
7 0
6 0
5 0
4 0
3 0
2 0
1 0
PWM
dut
y(%
)
Cool white(Max. 6500K)
W arm white(Min. 2700K)
Neutral white(4000K)
Recommended CCT range7 0 8 0 9 0 1 0 0
No. No.RGB/RGBW �ash
26
54
10
83
7
9
RGB/RGBW smooth rotation
6 Colour �ash6 Colour smooth rotation
Yellow cyan purple smoth rotation
RGB/RGBW fade in/out
Green fade in/out
Red fade in/out
White fade in/outBlue fade in/out
CH1, CH3 = Warm white LEDCH2, CH4 = Cool white LEDEach channel can supply up to 16W (@24V) & white balance can be controlled as below
Colour Temperature
Power DistributionCH1=0W, CH2=72WCH3=0W, CH4=72W
Warm WhiteNeutral WhiteCool White
CH1=72W, CH2=0WCH3=72W, CH4=0W
CH1=36W, CH2=36WCH3=36W, CH4=36W
Dimming Curve For RGBW/RGBDimming Curve For Dual WhiteLinear Dual White Colour Tuning
Name Name
RGBW & RGB Dynamic Modes
Dual White Mode & Dimming Curves
TASKLIGHTING
Specialising In LED Solutions
WWW.TASKLIGHTING.CO.NZ TEL 09 820 0004
While every effort has been made to ensure the accuracy of all information provided Task Lighting can not be held responsible for any errors. Task Lighting also reserves the right to modify/delete product details without notice.
Syncronising Remotes & RGBW Modules
Auto Transmition & Auto SyncronisationAs shown in the diagrams on page 2, one receiving control module can auto transmit commands from the remote to many other down stream control modules.This provides the ability for one remote to control almost limitless distances all in sync.For auto transmission & syncing to work each receiving module needs to be successfully must be matched to the remote (1 zone remote) and to each zone key (multi zone remotes).
NOTE:# The 30m max wireless transmission distance is with unobstructed line of sight. Transmission distances may be significantly less with walls, metal, concrete etc in the way. Other transmission sources such as WiFi & microwaves etc may also reduce the transmission range. Where obstructions and interference sources exist it is recommended that testing the transimiission range before finalising the project and module placement may need to be altered to acheive the desired result. Intermedaitely placed modules with now load can be used as a relay where transmission distances are shortened.
top related