tender document for procurement under · pdf file1 tender document for procurement under mhrd...
Post on 06-Feb-2018
240 Views
Preview:
TRANSCRIPT
1
TENDER DOCUMENT FOR PROCUREMENT UNDER MHRD SCHEME OF UPGRADATION OF EXISTING
POLYTECHNICS
DEPARTMENT: Humanities(Communication Skill Lab.)
S.No LABORATORY NAME OF EQUIPMENT WITH
SPECIFICATION
MAKE
&
MODEL
RATE TO
BE
QUOTED
1 Language lab – 30 User
1Software – 1 Teacher + 30 User Application
2 Sound system with speaker and master control
3 Table with consoles to house 30 systems
2
TENDER DOCUMENT FOR PROCUREMENT UNDER MHRD SCHEME OF UPGRADATION
OF EXISTING POLYTECHNICS
DEPARTMENT: Humanities(PHYSICS LAB)
S.No LABORATORY NAME OF EQUIPMENT WITH SPECIFICATION MAKE
&
MODEL
RATE TO
BE
QUOTED
1
PHYSICS
LABORATORY
Wheatstone BridgeCopper fitting, brass spring type jockey Teak base 2 gap typeWheatstone BridgeCopper fitting, brass spring type jockey Teak base 4gap type
2 Batteries 6volts 15 plates 100 AH
3 Battery chargersInput 220v, output12 volts, 5A fitted with fuse, ammeter and potentiometer to control current
4 Multimeter: accuracy. 1% ( Digital) range AC volts 0-25,10,25,100,500 voltsAC current 100 MA, 1 A 2.5 A, 10ADC voltage 0-2.5,10,25,100,250,500 volts
5 DC voltmeter ( Bakelite Stand) range :0-3 volt0-5 volt0-10 volt
6 DC voltmeter (Bakelite Stand) range : 0-100 milivolt
7 DC Ammeter (Bakelite Stand) range : 0-1Amp0-1.5Amp0-3Amp0-5Amp
8 Resonance Apparatus complete fitted on metal stand and brass pipe With scale
9 Tunning forks : Set of 8 forks in velvet lined case Ragg’s. English blue Steel Set of 8 in case
10 Lenses: Concave and Convex both type optically truea) 50mm dia Focal Length the 10 cm
15cm20cm40cm
b) 60mm dia 10cm15cm20cm40cm
11 Travelling microscope : 14cm vertical and 16.5cm horizontal movement type stainless scale in wooden case with cross wire fitted with Ramsdon eyepiece graticule and 2” objective vernier reading 0.1mm
12 Thermometers1) 0-110 x 1 Deg c2) 0-110 x 1/2 deg c
3
13 Surface Tension Apparatus:Capillary rise method complete with stainless stand to hold capillary tube and vernier microscope and capillary tube of dia upto 0.5mm and glass breaker capacity 250ml
14 Stop watch: 1) SWISS 1/10 second2) Stop watch smith English metal body start stop and fly back action
15 Vernier Calipers L.C. 0.1mm1) 12.5 cm without wheel drive2) German with wheel drive + hollow cylinders
16 Spherometer :Stainless Steel Screw college pattern L.C. .0005cm
17 Screw Gauge: Moore & with type stainless steel screw1) 15 x 1/200 mm2) 20 x 1/200 mm
18 Metallic bob for simple pendulum + cork (20)
19 Fortin’s Barometer
20 PN Junction Diode Characteristic apparatus with ammeter, voltmeter and built in power supply
21 Sonometer appratus with (complete set) weights
22 Gumthers apparatus (steel rods, rubber tubes, heater calorimeter with lids)
23 Parallelogram law Apparatus Gravesand’s (complete set) with spring balances, drawing pins, mirror strips, wooden blocks etc.
24 A long glass cylinder (50-100cm long and 3-5 cm in diameter)Steel ball bearing or lead shots, forcep, funnel, ( viscosity app. Complete set)
4
TENDER DOCUMENT FOR PROCUREMENT UNDER MHRD SCHEME OF UPGRADATION OF EXISTING POLYTECHNICS
DEPARTMENT: COMPUTER ENGINEERING
S.No LABORATORY NAME OF EQUIPMENT WITH SPECIFICATION MAKE
&
MODEL
RATE TO
BE
QUOTED
1. COMPUTER
SYSTEMS
icore7 2600 (3.4GHz,8HBL3Cache,quadcoreITB HDD,DVDWRITE SATA DVD RAM and Double lays windows 7home premium 64bit18inch TFT MONITER with accessories and preloaded software
2. UPS 5 KVA Sine wave less than 5%output voltage distortion at full
load 230V maintenance free sealed lead acid battery
DB-9 RS232 Smart slot interfave ports 0n line with one
hr. back up
3. Softwares Oracle software 11g
4. Software Flash Player 11g
5. LAP TOP Latest configuration i7 with preloaded softwares
6. DIGITAL CAMERA
16MPor more 5xoptical zoom full HDvideo recording 3inch LCD or more
7. WEB CAMERA Full HD camera 1080video calling on skype 20step autofaces 15MP snapshots automatic low light correction H1 speed USB 2.0 Interface
8. AIR CONDITIONER WITH STABILIZER
2 tons split type
9. TOOL KITS FOR NETWORKING
With latest tools and testing instruments
10. TOOL KIT FOR COMPUTER HARDWARE
With latest tools and testing instruments
11. LCD projector 2100 lumens native resolution XGA 1024X768 contrast ratio 13000:1 150%projection offset horizontal frequency 31k-102khz vertical scan 23-120hz, USB HDMI interface HDTVcompatibility
12. DVD WRITER 48X ultra speed
13. PRINTER (COLOR LASER JET
600x600dpi for black printing and 600x600 for color quality printing USB and RJ45 interface
14. PEN DRIVES 16 GB or above
15 softwares Anti virus Office 2010Operating system WindowsXP,Windows7, Coral draw,photoshop,Tally,Java, etc. latest versionsMulti user
5
TENDER DOCUMENT FOR PROCUREMENT UNDER MHRD SCHEME OF UPGRADATION OF EXISTING
POLYTECHNICS
DEPARTMENT: ELECTRONICS AND COMMUNICATION ENGINEERING
S.No LABORATORY NAME OF EQUIPMENT WITH
SPECIFICATION
MAKE &
MODEL
RATE TO
BE
QUOTED
1.
ELECTRONICS LABORATORY
DC regulated low voltage variable power supply ( 0-30 v, 1Amp) with multiple settings
2. DC regulated multiple output power supply(+5V,+12v, -5v, -12v, +15v, -15v)
3. Audio oscillator ( 20Khz, Sine,Square,Triangular output )
4. Wide band RC Oscillator
5. RF Signal Generator (0-72 Mhz,Sinewave with provision for external and Internal Modulation)
6. Pulse Generator
7. Function Generator ( 0.3hz to 3Mhz in 7 decade stages sine, square, triangular ,D.C.)
8. Single trace CRO with accessories 50 MHz
9. Dual trace CRO with accessories 50 Mhz
10 Electronic Multimeter DC and AC with different ranges
11 Electronics digital Multimeter three and a half digit
12 Digital LCR- Q meter
13 Transistor tester lab model
14 Mains Voltage stabilizer(5 KVA) output voltage 230 + 5%, Input range 90-290V
15 Voltmeter DC (MC) (Scale size 100 mm Square ) lab type0-1 V0-5 v0-10v0-30 v0-1 mV0-10 mv0-50mV0-100 mv,0-500 mv
16 DC Ammeter (MC) (Scale size 100 mm Square ) lab type0-1 amp0-2 amp0-500 mA0-100mA,0-500µA
6
17 AC voltmeter (Scale size 100 mm Square ) lab type0-300 V , 0-600 v ( also to be used in m/c lab)
18 Battery of 12 v and 125 Ampere hour
19 Single Phase Variac 10A ( Output 0-290v )
20 Rheostat of different wattage and resistance lab type
21 Servo stabilizer power supply 20 A ,(220v + 1% , 5 KVA
22 IC Bread Boards assorted type
23 Distortion factor meter 20Hz-20 Khz in 3 stages,distorsion range .01-100%
24 Decade resistance, capacitance and inductance (four each) ( Lab type )
25 Strip chart recorder
26 Digital Panel meters 3 and ½ digits
27 Digital thermometer lab type
28 Stroboscope cum motor drive disc
29 Digital load indicator with load Cells
30 Digital Lux meter
31 CROs 100 MHz with accessories
32 Rectifier Kits ( Experimental Kits for Rectifier Circuit )
a) Half Wave Rectifier.A board consists of the following built in parts:-1/Suitable step down transformer with proper rating of silicon diodes2/Mains On/OFF switch, Fuse and jewel light.3/ The unit is operative on 230V +/- 10% at 50 Hz AC
b) Full Wave Centre Tap Rectifier.
A board consists of the following built in parts:-1/Suitable step down transformer with proper rating of silicon diodes2/Mains On/OFF switch, Fuse and jewel light.3/ The unit is operative on 230V +/- 10% at 50 Hz AC
c) Full Wave Bridge Rectifier.A board consists of the following built in parts:-1/Suitable step down transformer with proper rating of silicon diodes2/Mains On/OFF switch, Fuse and jewel light.3/ The unit is operative on 230V +/- 10% at 50 Hz AC
7
33 Filter Circuit Kit ( Experimental Kits for Filter Circuit )A board consists of the following built in parts:-(shunt filter, series inductor filter, pie filter combine in one kit)
34 Transistor Kits ( Experimental Circuit boards )A board consists of the following built in parts:-1/ +/- 9V DC. at 100mA, IC regulated Power supply internally connected.2/ All three circuits circuits i.e. CE, CB, and CC are built separately.3/ adequate no. of other electronic components.4/Sine wave signal Generator of 1Khz, with variable, low distortion, based on IC.5/Suitable Ranges of Ammeter(mA) and Voltmeters(mV)5/Mains On/OFF switch, Fuse and jewel light.7/ The unit is operative on 230V +/- 10% at 50 Hz AC
35 FETs ( Experimental Kits for FET Circuit )A board consists of the following built in parts:-1/0-20V D.c. at 50mA, continuosly variable Power supply.2/0-12V D.c. at 50mA, continuosly variable Power supply.3/ Two D.C. Voltmeter to read 0-20V.4/D.C.Milliammeter to read 0-20mA.5/Field Effect Transistor..6/ adequate no. of other electronic components.7/Maains On/OFF switch, Fuse and jewel light.8/ The unit is operative on 230V +/- 10% at 50 Hz AC Mains.
36 Operational Amplifier Kits ( Experimental Kits) Capable to perform all practicals based on 741 IC with built in power supply and provision for I/O
8
1
COMMUNICATION
LABORATORY
Facsimile (Fax)-transmitter receiver
2 Radio Receiver Trainer Kits/Deconstruction Models
3 AM/FM signal generator kits
4. Optical fibre bench
01. Fibre-Optic transmitter @ 660nm.02. Audio Amplifier circuit.03. 12V & 6V DC at 200mA, IC Regulated power supply internally connected.04. One mike connector.05. Potentiometer to vary the current of LED.06. Fibre - optic photo transistor.07. Detector circuit with speaker of 8 ohms.08. Mains ON/OFF, Fuse and jewel Light.09. A mike to transmit voice.10. One meter and five-meter PMMA patch cords with in - line adaptor.11. The units are operative on 230V ±10% at 50Hz A.C. Mains.
5 Digital frequency meter lab type latest
6 Modems, Opto coupler different types of microphones and other accessories
7 Pulse Modulation and Demodulation
8 Pulse Amplitude Modulation and DemodulationA board consists of the following built in parts:-1/+/-9 V DC at 100mA,IC Regulated power supply internally connected.2/Variable frequency sampling pulse generator.3/Sine wave audio frequency modulating signal generator.4/ PAM Modulator circuit based on operational amplifier.5/PAM Demodulator circuit based on a point contact diode and an operational amplifier.6/ adequate no. of other electronic components.7/Mains On/OFF switch, Fuse and jewel light.8/ The unit is operative on 230V +/- 10% at 50 Hz AC Mains
9
9 Pulse Width Modulation and DemodulationA board consists of the following built in parts:-1/+/-6 V DC at 100mA,IC Regulated power supply internally connected.2/Pulse Train (Carrier) Generator based on timer IC3/50 Hz A.C. sinusoidal signal obtained from stepped down transformer4/ Pulse Width Modulator based on timer.5/Pulse Width Demodulator based on operational amplifier6/ adequate no. of other electronic components.7/Mains On/OFF switch, Fuse and jewel light.8/ The unit is operative on 230V +/- 10% at 50 Hz AC Mains
10 AM Transmitter and Receiver Trainer
A board consists of the following built in parts:-1/+9 V DC at 100mA,IC Regulated power supply internally connected.2/Carrier generator circuit which generates carrier wave3/Modulating circuit based on two transistors4/Demodulatig circuit.5/ adequate no. of other electronic components.7/Mains On/OFF switch, Fuse and jewel light.8/ The unit is operative on 230V +/- 10% at 50 Hz AC Mains
11 Sampling Reconstruction Trainer
12 Pulse Code Modulation and demodulation TrainerA board consists of the following built in parts:-01 5V D.C. at 100mA IC regulated power supply internally connected.02. ± 15V D.C. at 100mA IC regulated power supply internally connected.03. + 5V D.C. to -9V Variable D.C. output.04. Built in TTL Clock Generator 33 KHz.05. Modulating Signal Generator 15Hz to 300Hz.06. PCM Encoder.07. PCM Decoder.08. Data display with LED’s09. Adequate no. of other electronic components.10. Mains ON/OFF switch, fuse and jewel light.11. The unit is operative on 230V ±10% at 50Hz A.C. Mains.
13 Delta Adaptive Delta Sigma Modulation and Demodulation Trainer (ST 2105)
14 Satelite receiver Standard HD
10
15 DVD player system 5.1 channel
16 PA system with microphone and other accessories
17 Mobile Trainer Kit lab type
11
1
ELECTRONICS/Workshop
Hand Tools Set
2. Soldering Set
3. Hand Drill
4 Soldering stations temperature controlled
5 Solder suckers with accessories
6 De-Soldering pump
7 Soldering Iron 10, 25, 35, 65 watts 220 Volts
8 Pliers 6" and 8"
9 Long Nose Pliers
10 Cutting Plier
11 Wire Stripper
12 Screw Drivers 3" to 12” Flat Head
13 Tweezers
14 Hammer ½ lb
15 Spanner 6mm to 12mm
1.
ELECTRICAL
WORKSHOP
Shock treatment chart
2. Indian Electricity Rules chart
3 Crimping tools hydraulic /manual
4 12 volts/5 Amps relay / double contact single contact
5 MCB 6 Amps / 30/amps /60 amps /100 amps
6 E L C B , 5 A, 15 A, 30 A 60 Amp
7 Table fan
8 Ceiling fan ( 36", 48", 56". On each)
9 Toaster Automatic
10 Mixer juicer Grinder
11 Sheet metal cutting machine
12 Heat convector
13 Room Heater /double Rod
14 Electric Kettle
15 Electric Iron ./ simple / automatic / steam
16 Desert cooler
17 Battery charger 10 Amp / 20 Amp, 6v/ 12 v/ 24 v
18 SMPS input voltage 100-270v .. o/p voltage 110 v ,24 v ,12v ,6 v
19 IC voltage regulator power supply . 12v , 6 v,
20 Inverter 1 KVA, with battery 12v
21 Energy Meters (3- phase 40 amp and 1- phase 10 amp) ( Electronics and Digital )
22 3-Phase Resistive load Lamp Load
12
1
DIGITAL LABORATORY
/MICROPROCESSOR
LABORATORY
Logic probes (TTL and CMOS)
2 Digital logic trainer (TTL)
3 Logic Trainer Boards
4 Microprocessor trainer Kits 8085
5 Microprocessor Trainer Kits 8086
6 Microcontroller Trainer Kits 8051/8031
7 Computer Trainer
8. Interfacing Cards
9. Digital IC Tester Model - Nikki
10. Universal Programmer
11. Laser printer
12. Digital IC Tester Model - Nikki
13. Universal Programmer
14. Digital Multimeter (Motwane)
15. EPROM Programmer
16 EPROM Eraser
17 Additional cards
1.
ELECTRICAL ENGINEERING
/ MACHINE
LABORATORY
Single phase 3 KVA 220/110 V 50 HZ Air coled Transformer Housed in a container
2. Three phase 2 KVA Transformer with terminals of primary and secondary on the Panel
3. DC shunt motor 5 KW 220 V 4 Pole with starter and panel board
4. 5 H.P Three phase squirrel cage induction motor with complete panel
5. 5 H.P Three phase Synchronous motor with complete panel
6. 5 KVA Three phase Alternator with DC coupled motor complete panel and bus bar
7. Single phase 0.5 HP 4 pole capacitor start capacitor run motor
8. 3 point starter for 5 KW motor
9. Star Delta starter for 5 H.P motor manual and automatic
10. DOL starter 10 amp
11. Digital Tachometer
12. Clip on meter 20A/200A
13. Synchronoscope
14. Three Phase Variac 20 A
15. Single Phase Variac 15 A
16 DC coupled generator 5 KW coupled with three phase slip ring induction motor complete with panel and accessories
17 Frequency Meter (Digital )
18 AC servo motor (1HP)
19 Stepper Motor
13
1.
TV/ Audio Video
laboratory
Audio signal generator
2. RF Oscillator
3. Electronic multimeter Analog
4. Electronic digital multimeter
5. AF output power meter
6. Signal tracer
7. Signal Injector
8. Colour TV training model
9. VCR Trainer
10. UHF/VHF Convertor
11. CCTV System PAL Based
12. Field Strength meter
13. Satellite Receiver, Mixer Amplifier
14. TV receiving antenna-Yagi,Uda turnstile and log periodic
15 Coloured LCD TV 42”
16 Dish for TV
1.
Industrial Electronics
Power Electronics Lab
Morgan Chopper Kit
2. Joner Chopper
3. Series Inverter
4. Parallel Inverter
5. Speed Control of dc motor (Thyristorized)
6. Single Phase Cyclo Convertor with Thyristors
7. Kit for study of effect of free wheeling diode on power factor
8. SCR Characteristics
9. Gate Triggering Characteristics of SCR
10. AC Phase Control Trainer Kit
11. Kit to Study 3-phase Control Bridge Convertor
12. UJT Characteristics and its Application as Relaxation Oscillator
1 MICROWAVE
LABORATORY
Microwave Bench consisting of Klystron
Power supply, Reflex Klystron tube, Klystron
Mount, Isolator, Variable Attenuator, Horn
antenna, Direct Frequency Meter, Detector
Mount, VSWR meter ,various Tees (E,H,
Magic etc,), circulator and various other
wave propagation components.
14
TENDER DOCUMENT FOR PROCUREMENT UNDER MHRD SCHEME OF UPGRADATION OF EXISTING
POLYTECHNICS
DEPARTMENT: MEDICAL LABORATORY TECHNOLOGY
S.N
o
LABORATORY NAME OF EQUIPMENT WITH
SPECIFICATION
MAKE &
MODEL
RATE
TO BE
QUOTED
1
Biochemistry
Lab
Semi Auto AnalyzerStatic photometer with range 340 – 700 nm
8 interference filters 340, 405, 450, 505, 546, 578, 600 & 670 nmSilicon photodiode detectorPhotometric range: 0 – 2.5 ODQuartz halogen lamp of 12 Volts, 20 WattsFlow cell: 18 micro litre.Low aspiration volumeAnalysis modes: 1 & 2 point linear, end point absorbance, rate of reactionOpen system with usability of reagent for any manufacturer
2 SpectrophotometerTechnical Specifications:Display:3.5 digit LEDRange: 340 to 960nmWavelength Indication: Digital displayWavelenght Resolution: 1nmPhotometric Range/Output:%T:0 to100%Abs: 0 t0 1.999Conc.: 0 to 1999Resolution: 0.1%T, 0.0001Abs, 1.0 conc.0Special Band width: 10nmWave length resolution: 5nmAccuracy: ± 2.5nmWave length setting: By rotating discDetector: Silicon photodiodeLight source: Tungsten halogen lamp 6V, 10WMonochromator: 600 lines/mm gratingSample holder: 10mm path length test tubesPower Supply: 230 ±10PHz ACAccessories: Cuvettes/test tubes of 10mm path length 2 No.s; dustcover & manual
3 Electrolyte AnalyzerAnalysis: sodium & Potassium
Open system with usability of reagent for any manufacturerSample: serum/plasmaLow aspiration volume
15
4 pH Meter, digital type
Range: 0 to 14 pH
Resolution : 0.01 pH
Accuracy : = 0.01 pH -1 digit (Relative)
Repeatability : 0.01 pH
Input Resistance : 1.0 ohms
Battery Operated
FEATURES:
Automatic Low Battery Indication.
Low Battery Consumption.
True Hand Held
Easy Operation.
Housed in PVC Cabinet.
5 Centrifuge, Fixed Rotor Type (3 speed control),
16 Tubes
16
1
Microbiology
Lab
Semi automatic, AutoclaveStainless steel, Horizontal TypeMicroprocessor PID controller with dual display for Temp. & TimeUnique pedal free designReduced loading heightNo hinge or shaking lidsFully SS 304 construction30 PSI models also available on request.Construction : SS 304Operating Pressure : 1.2 - 2.1 kg/cm²Operating Temperature : 121ºC - 134ºCSterilization Time : 0-99 minsControl : Digital
2 ELISA Reader Semi AutomaticDetection Modes UV/Vis absorbance Measurement Modes Endpoint and kinetic measurements, Micro plate Formats 6to 384-Well plates,user definable, light Sources High energy xenon flash lamp, Detectors Side window photomultiplier tube Optical filters Exitation and emission filter wheels for 8 filters each Spectral Range 240to 740 nm or 240to 900nm Sensitivity ABS Dynamic range :0.000-4.000 OD reproducibility:0.010 OD for 0-2 OD range Red Time Flying mode 15s(96),30s(384)Incubation Non or +5oc above ambient up to 45 oC or 60 oC
3 Steel Laminar Flow System- small sizeAir velocity: between 0.4 to 0.5 mls +- 20 %HEPA Efficiency: Pre filter: 99.997 % at 0.3 microns with DOP test washable with an arrestance up to 90 % at 5 microns less then 65 dB (A)Sound Level: Lux 900 – 1300 LuxLight intensity: standard 209 E Class 100Power supply: 200 V single phase 50 HzSize: 2 X 2 FeetOptional: S.S Table top, U.V Lights attachment, Front acrylic Door, Gas/Vaccum Cock, Castor Wheels at bottom.
4 Digital weighing balance, mono-pan top loading typeControl: digitalPan: 80 mm diameter, monopan, top loadingCalibration: fully motorizedCapacity: 60 – 210 gmsReadability: 0.01 – 1.0 mgOther: side covered in a glass
5 Refrigerator 365 lit standard make and model
17
1
Histopathology Lab
Semi Automatic tissue Processor Operation : semi automaticProgrammable 12 stage timing sequence having 24 hours Calibrated Programming discDelay Action of 24 hours.Precision gear mechanisms for trouble free working.Thermostatically controlled Wax Bath with temperature range of 0 – 85 degree Celsius and cut out of 60 degreeEach Station with capacity of 1 Ltr with two wax bathsStations: 10 – 12, glass or stainless steel Tissue cassettes: 24 nos with 36 mm size.Automatic agitation.
2 Paraffin Wax Oven Thermostatically controlled with temperature range of 0 – 85 degree Celsius and cut out of 60 degreeCapacity of 1 Ltr
3 Tissue Floatation Bath Round shapedDimensions overall: 300 mm radius, 90 mm heightDimensions bath well:210 mm radius, 55 mm heightTemperature: +30° C to +90° CWeight: 2 kgPower supply: 115-230 V / 50/60 Hz / 200 VA
4 Slide Warmer-copper plate, rectangular Rectangular shapedTemperature range from slightly above ambient to 65ºCAccommodates up to 30 slides with slide drying bars.Black Anodized heavy gauge aluminum worktop.Electrical: 120 volts, 150 Watts
18
1
Haematology Lab
Automatic hematology analyser/cell counter 3 part differential with 18 parametersOutput: 60 tests per hourSample volume: 50 micro litre whole blood Report following 18 parametersWBC,RBC,HGB,HCT,MCH,MCHC,RDW,SD,CV,PLT,NEUT%,LYMPH%,MIX%,NEUT#LYMPH#,MIX#,PDW,MPV,P-CLR,AutomaticFloating threshold for correct separation of RBC,WBC,PLT.Apeture monitoring by counts done 12 times in 0.5 secs.
2 Demonstration Microscope with extension eye piec
Standard total magnification: 40X, 100X, 400X, 1000XEyepiece: WF10X/ WF15X, WF20X.Viewing head: Compensation free Binocular head (3-Teaching Binocular or monocular) Objective: 10X, 40X(s) and 100X.Focusing: Coaxial Coarse and Fine Focusing system.Nosepiece: Quadruple nosepieceLight source: Halogen bulb 12V30W. AC85V-230V Adjustable brightness
3 Auto ESR reader
4 Hemocue Hb EstimatorSample material: Capillary, venous or arterial whole blood.Measurement range: 0-25.6 g/dL (0-256 g/L or 0-15.9 mmol/L).Results: In about 60 seconds.Sample volume: 10 µL.Power: AC Adapter or batteries.
5 LCD Digital TV 48 inch size, wall mountable, USB and HDMI ports, external 5.1 channel system
6 BP Apparatus Measuring: by mercury columnCuff: VelcroType: desktop type
7 BP Apparatus, digital typeMeasurement system: oscillometric, Measurement range: pressure: 0 – 280 mmHg, Pulse: 40 – 180 pulse/ minPower source: AA size x 4Battery: Manganese battery or Alkaline battery
8 Desktop Computer with UPSwith accessories icore7 2600
(3.4GHz,8HBL3Cache,quadcoreITB
HDD,DVDWRITE SATA DVD RAM and Double lays
windows 7home premium 64bit18inch TFT
MONITER and preloaded software
9 Laser Printer600x600dpi for black printing and 600x600 for color quality printing USB and RJ45 interface
19
TENDER DOCUMENT FOR PROCUREMENT UNDER MHRD SCHEME OF UPGRADATION OF EXISTING
POLYTECHNICS
DEPARTMENT: TEXTILE TECHNOLOGY
S.No LABORATORY NAME OF EQUIPMENT WITH SPECIFICATION MAKE
&
MODEL
RATE TO
BE
QUOTED
1.
Textile Testing
Lab
Projection Microscope with 5x, 10x, 20x, 40x & 100x lenses with fibre cross section kit, high resolution camera and imaging software with measurement facilities
2. Trash Analyser lab Model 100gm sample
3. Bear Sorter/Comb sorter to determine fibre length
4. Fibre Fineness Tester to measure fibre fineness in terms of micronaire value by single compression air flow principle
5. Torsion balance to weigh fibre (0.5 – 10 mg with 500 divisions least count 0.01 mg)
6. Stelometer (for bundle strength of fibre) Range 2-7 Kg Loading 1kg force/sec Size 350mm WX400mm HX500mmD
7. Dry & Wet Bulb Hygrometer
8. Moisture Meter (Moisture content upto 0-50%, Temperature 10-600C
9. Manual Wrap Reel 1.5yd dia
10. Electronic Wrap Reel 1.5yd dia
11. Wrap Block (For sliver & Roving)
12. Manual Yarn Appearance Board Winder
13. Electronic Yarn Appearance Board Winder
14. White & Black Boards for above M/cs 1feetx1feet
15. Knowles Balance (Range 2-134 counts) (For Yarn count checking)
16. Quadrant Balance (For Yarn count checking)
17. High Precision Electronic Balance (with cover up to 4 decimal places)Pan Size 198X205mmResponse time 2-4 Sec. Display Bakelite LCD displayUnit of measurement –gm,mg,oz,lb.Operating temperature 15-40 degree celsius
18.Single Yarn Twist Tester (Electronic)
19.Double Yarn Twist Tester (Manual)
20.Yarn Crimp Tester
21. Single Yarn Strength Tester (To determine tensile strength & elongation) 10 Kg load cell with yarn grips, peak force
22. Lea Strength Tester Capacity (To determine tensile strength & elongation) 0.0-1000 Kg load cell with yarn grips and operating softwareCapacity range:0-250 kgX0.5 kg0-100 kgX0.2 Kg
20
0-50 kgX0.1 kg.Transverse speed 300mm/minMinimum separation of grip 20mm
23. Single Yarn Evenness Tester with spectrogram attachment & all other graphical analysis with printer port. Measure with high accuracy the mass evenness and imperfections of yarn silver and roving
24. Mechanical Package Hardness Tester ( to check hardness of yarn packages)
25.Fabric Crease Recovery Tester (for crease recovery angle)
26. Fabric Bending Length/Stiffness Tester (For bending height, flexural rigidity and bending module of fabrics)
27.Fabric Drape Meter (To determine drape properties of fabric)
28.Digital Fabric Bursting Strength Tester (capacity 7000 kpa/1000 p.s.i
29. Fabric Air Permeability Tester Digital
30.Shrinkage Template along with marker (for finding accurate shrinkage in fabrics)12inchx12inch
31.Water Repellency Tester (to check water repellency of fabric by spray test)
32. Air Compressor of 310 cfm capacity
33. Handy Ends counting Glass (8x)/ Pick Counting Glass34. Fabric GSM Cutter along with rubber pad and packet
weighing scale (accuracy 0.01gm x 100 gm capacity)
35. Cutting Blade for GSM Cutter36.
Tachometer standard rpm37. Air Conditioner (2 Ton)split type with 3KVA stabilizer
21
1.
CAD LAB
Desktop Computer Intel(R) Core(TM) i7-2600(3.40 Ghz, 8 MB cache ,4 cores) processor or latest , 16 GB 1333 MHz DDR3 SDRAM , 1 T B SATA (7200 rpm) Hard Disk , 16 X SATA Super Multi DVD Writer , Network interface :wireless NIC 802.11b/g/n mini card, 19” TFT Monitor, USB Mouse- Key Board, Windows ®7 Professional 64 Operating system Genuine(preload) SSF(Small form Factor).
2. Laser Printer B/W600x600dpi for black printing quality USB and RJ45 interface
3. Laser Printer (Coloured) Color LaserJet Multifunction PrinterAll in one Functions: Print, Copy, Send-to-email/network folder.Print Speed: Normal for color/Black upto 31ppm.First Page out (black) : 10.9 sec / (color) : 12.2 sec
Automatic Document feeder ADF, Automatic two sided Printing/copying .Scanner type : Flat bed, ADFScan Resolution optical : up to 600 dpiScan Size Flatbed/ADF: 8.5 X 14 inFile format support: PDF, JPEG, TIFF
4. Scanner6-colour, 96-bit scanning (photos); 4800 x 9600-dpi resolution; built-in transparent materials adapter holds five 35 mm slides or six negative frames; large scan bed holds four 10 x 15 cm prints; multiple photo, slide or negative scanning; instant warm-up and fast preview scans; 4-button front panel (Scan, Scan Film, Copy or Scan to PDF); Real Life technologies: red-eye removal, adaptive lighting, dust and scratch removal and colour restoration; Photosmart software with Photosmart Share; OCR software
5. LCD Projector2100 lumens native resolution XGA 1024X768 contrast
ratio 13000:1 150%projection offset horizontal frequency 31k-102khz vertical scan 23-120hz, USB HDMI interface HDTVcompatibility
22
1.
Dyeing &
Printing Lab
HTHP Glycerin Bath Beaker Dyeing M/c (Inside & Outside both S.S) 12 Pots x 250 ml
2. Colour Matching Light Cabinet (color matching booth for visual assessment of color under 6 standard lights, 45 degree angle and doors
3. Crock Meter (to determine colour fastness of textiles to Dry & Wet Rubbing)
4.Grey Scale for Change in colour
5.Grey Scale for assessing staining
6.Perspirometer (fastness against perspiration)
7.High Speed Stirrer
8. Light Fastness Tester (to determine the coloue fastness of textiles against sunlight)
9.Tumble Dryer
10.Thermometer (0-200 celsius) (mercury)
11.Sublimation fastness Tester (fastness against sublimation)
12. ThermoStir – To heat solutions with simultaneous stirring option (Teflon coating on heating plate with thermostat, temperature ambient upto 1000C
13.Wooden Blocks for Printing
14.Wooden Frame for Screens
15.Squeegee for Screen Printing
16.Measuring Cylinder 100 ml (Borosil)
17.Measuring Cylinder 250 ml (Borosil)
18.Measuring Cylinder 500 ml (Borosil)
19.Glass Beaker 250 c.c (Borosil)
20.Glass Beaker 500 c.c (Borosil)
21.Glass Rod
22.Glass Pipette (Borosil)
23.Glass Burette (Borosil)
24.Nickel Spoon
25.Round Flask
26.Conical Flask
27.Burette Stand (Iron)
28. High Precision Electronic Balance (with cover)
29. Fully Automatic Washing Machine
30.Gas Pipe Line with four cylinders
31.Gas Burners
32.Iron Stand for Burners
33. Slanting Wooden Tables for Screen Printing Length - 20 Feet, Width - 5 Feet, Height - 3 Feet
34. Wooden Tables for Block Printing Length - 20 Feet, Width - 5 Feet, Height - 3 Feet
35. Wooden Exposing Tables with glass top and six tube lights Height - 20", Top - 36x42" with partition for two nos. tables
23
1 SPINNING LAB Lab Model Card (Miniature Card) 250 mm working width having feed roller, cylinder, doffer, stripping roller, crush roller, stainless steel under casing, take up drum & condenser with individual AC variable speed motors with control system to vary the speed of feed roller, cylinder and doffer inclusive of motors, inverters, electrical, rpm indicators, potentiometers, control system & other accessories
2 Lab Model Draw Frame (Miniature Draw Frame) having modern drafting system and extended creel to accommodate 8 nos. of slivers for doubling with provision to vary the speeds of front roller, middle and back roller, Inclusive of motors, control system & other accessories
3 Lab Model Speed Frame (Miniature Simplex) having 4 spindles, 110 mm gauge, 110 mm dia package, 250mm lift, SKF PK 1500, 3 roller drafting arrangement, individual AC variable speed motors with control system to control speeds of front & back roller, flyer and bobbins with motors, electrical control system & other accessories
4 Lab Model Ring Frame with 6-12 Spindles, Staple length up to 60mm, suitable for processing cotton & other synthetic fibres and their blends, drafting system latest PK-series, PK 20205, Total draft range 12 to 50, spindle speed upto 18000 rpm, twist range 5 to 60 TPI, equipped with all stop motions, Inclusive of motors, control system & other accessories
5 Lab Model Winding (6 spindle single sided machine, max. mechanical winding speed 16000 MPM, positive drive to the package, spring controlled counter weight system, electronic non contact type sensor, motorized tension device, motorized waxing device, feeding creel with universal holder, pacjkage type – cone, 152 mm traverse, individual speed and length setting, strat/stop/reset switch with LED indication on each position, package density measuring attachment
6 Lab Model Fancy Doubling Machine having 6 spindles, 3 inch gauge, 2 inch ring diameter, 8 inch lift, having two rows of bottom roller with variable intermittent motions for fancy effect with necessary controls for varying the Off/On time for fancy effect and provision for changing the bottom roller to get different effects. AC variable speed motors with control system to control speeds of Spindle, front & back rollers. Inclusive of motors, control system & other accessories
7 Lab Model Rotor (Miniature Rotor) suitable for Research & Demo purposes having 4 rotors, 230 mm gauge arrangement having 38/43/48 mm rotor diameters with opening rollers and Navels suitable for processing cotton fibre. Rotor speed 50,000-1,00,000 rpm. Inclusive of motors, control system & other accessories
24
TENDER DOCUMENT FOR PROCUREMENT UNDER MHRD SCHEME OF UPGRADATION OF EXISTING
POLYTECHNICS
DEPARTMENT: OFFICE MANAGEMENT AND COMPUTER APPLICATION
S.No LABORATORY NAME OF EQUIPMENT WITH SPECIFICATION MAKE
&
MODEL
RATE TO
BE
QUOTED
1.
OMCA LAB
Computer Destop Intel Core -2010, Window-7 2GB Hard Disk, DVD rom-18.5 inch EFT
2. Laser Jet Printer 600x600dpi for black printing and 600x600 for color quality printing USB and RJ45 interface
3. CCTV IP camera with1/4” Image sensor,H.264 compression based VGA resolution( 640 X 480), CS mount camera, with real time 25 FPS viewing and recording
4. Multimedia Projector Such as sharp-CLCD Multimedia projectorResolution: 1024X768XGA,ANSI lumen:3500
5. Interactive Board Diagonal size mm 1700, Aspect Ratio 4:3,Linux, Compatibility No.
6. Digital Copier Minimum copying speed:15,paper, Size(original/Image):A3/A3,Ram9MB)/16,Bye Pass : 50 sheets, Zoom:50 TO200 % Category: Simplex
7. Coin and currency Sorting and counting Machine Infra super Counter
8. Shredder Super Shredder
9. Typewriters Godrej/Remington
10. Bio metric system
top related