testers & others - uryu · testers & others digital torque ... uryu uet-10c torque tester...
Post on 06-May-2018
279 Views
Preview:
TRANSCRIPT
TESTERS &OTHERSDIGITAL TORQUE TESTERSTESTERSURYU NETWORK
7 3AIR TOOLS GENERAL CATALOG
ModelRecommended
TorqueCapacity Range
BlowCapacityRange
AccuracyDimensionsmm(about)(WxDxH)
WeightKg(about)
AccessoriesSocket Adapter
7 4AIR TOOL GENERAL CATALOG
OTHERS
DIGITAL TORQUE TESTER
OTHE
RS
The down-sized UDT-200 & UDT-500 series are designed to fill a definite need for accurate check and adjustment oftorque output of oil-pulse tools and hand torque testers. With built-in rechargeable battery in addition to the AC powersource, it offers a mobility at different application in your factory. Newly integrated function of the data storage for down-loading contributes to the periodic diagnosis of the tools for quality products. By the conventional functions the existingcustomers have been familiar with same usage in previous models UET-200BP & UET-500BP.
URYU UET-10C torque tester is designed to check output torque of US-LT series Torque Control Screwdrivers & hand torque testers and showsLED digital reading on display. Furnish your tool control room and laboratory with tester for reception,regular check and torque adjustment of tools.
Features* Ni-Cad battery operation gives hand-carry mobile use in your
assembly site especially for pulse-tools' commencement of one dayoperation. AC power source from your plug can be used together.
* 10-hour continuous operation by battery is possible. Full rechargingtime is approx. 8-hours.
* Designed compact, amplifier of UDT-200A(E) has only 1.7Kg inweight 43% lighter and W198xD171xH115mm in dimensions 34%smaller than previous model UET-200BP.
* Memory function can store maximum 250 torque data.* Supreme accuracy of within ± 0.5% at the rated output.* Red color LED display gives clear visual confirmation.* PC output terminal RS-232C (9,600 bps) allows RS printer connec-
tion.* Torque transducer mounted in pickup has optimum function for
measure of Oil-Pulse tools. The traceability remains the same asprevious models.
Application* Torque check and adjustment for standard type of Oil-Pulse tools.
(Shut-off type of Oil-Pulse tools needs optional Soft-JointAttachment.)
* Torque check and adjustment for Angle Nutrunners using optionalSoft-Joint Attachment.
* Torque check for manual torque wrenches.
WARNING !* Never apply toque higher than the specific rated output.* Never disassemble. Never give strong shock or vibration.* Never use under situation giving direct rays of the sun,
high humidity or dust.* Never apply the tools of such impacting mechanism as
impact clutches, cushion clutches, etc.
Features & Specifications* LED DIGTAL DISPLAY-Easy reading in the darkness as well.* PORTABLE(with a built-in-battery)-Easy use on production lines.* APPLICABLE TO REVERSING TORQUE AS WELL.* APPLICABLE TO MANUAL TORQUE WRENCHES.* EAST OPERATION and HIGH PRECISION.* CAPACITY RANGE 0-10.0Nm* SIZE (Approx) 190 x 160 x 65mm (7 31 /32" x 6 19 /64" x 2 9 /16")* WEIGHT (Approx) 2.3kg (5.1lbs)
Soft-Joint Attachment
SPECIFICATIONS
UDT-200A-200E
15-200N.m10-150ft-Ib150-2000kgf.cm
0-99 blows(*)
±0.5% atrated output
Amplifier(198×171×115)PicK-up(240×125×76)
Amplifier(1.7)PicK-up(8.5)
(3/8) 836-520-0(1/2) 836-520-1
UDT-500A-500E
150-500N.m110-370ft-Ib15-50kgf.m
0-99 blows(*)
±0.5% atrated output
Amplifier(198×171×115)PicK-up(280×150×90)
Amplifier(1.7)PicK-up(15.0)
(1/2) 836-520-7(5/8) 836-520-8(3/4) 836-520-9
(※) on condition that input torque is over 10% of rated output.(○) Operating Environment : (10-40℃), Humidity(20-80%), No Dew
7 5AIR TOOL GENERAL CATALOG
OTHERS
UF T SERIES TESTER
UHT SERIES TESTER
OTHERS
UFT-Fastening Tester is designed to detect and indicate precise fastening torque or tension to simulate joints to vari-ous actual fastening applications. Before the fastening operation, tools can be justified by checking with tester to pre-vent incorrect fastening due to power drop and etc.
The UHT-series simply designed hydraulic torque testers are suitable to be applied to Screwdrivers (Cushion, Positive,Impact Clutch types), Impact Wrenches and similar Impact action fastening tools in monitoring torque output of new andrepaired tools in comparison with their master tools. The readout in the dial indicator does not show absolute torque val-ue, but just comparative degree of power of the tool being tested.
SPECIFICATIONSUFT-6 UFT-10
UFT-16 UFT-24
Bolt Size Tension Range(kN) Torque Range(Nm)
M5 3.6-6.1 3.2-5.4
M6 5.1-13.9 5.4-14.7
M6 5.1-13.9 5.4-14.7
M8 10.4-22.2 14.7-31.4
M10 17.8-30.6 31.4-53.9
M12 25.5-41.7 53.9-88.2
M14 35.7-60.3 88.2-149
M16 52.8-67.4 149-190
M18 59.9-92.6 190-294
M20 83.3-125 294-441
M24 104-162 441-686
Model
UFT-6
UFT-10
UFT-16
UFT-24
SPECIFICATIONS
Model
UHT-12
UHT-16
UHT-25
UHT-35
UHT-50
Applicable Tool Type Applicable Torque Range
or Square Drive Size Nm kgf-m ft-lbs
Cushion /Positive Clutch 1-8 0.1-0.8 0.7-5.9
Impact Clutch 3-20 0.3-2.0 2.2-14.8
3 /8"(9.5mm) 20-50 2-5 14-36
1 /2"(12.7mm) 50-300 5-30 36-215
3 /4"-1"(19.0-25.4mm) 300-2000 30-200 215-1450
UHT-35 UHT-25 UHT-12 UHT-50
UFT-SP SERIES SIMPLE FUNCTION CHECKERThe UFT-SP Series Checker is designed to be installed at the place near to the assembly line for the simple functioncheck of shut-off type Oil Pulse Tools before the daily operation.
SPECIFICATIONS
Model
UFT-SP01
UFT-SP03
UFT-SP06
UFT-SP15
Torque RangeDrive Size
Weight
Nm ft-ibs Kg lb
3-13 2.2-9.6 Bit:6.35H 3.5 7.7
10-36 7.4-26.6 Socket:8,10,12 3.5 7.7
20-60 14.8-44.4Socket:12,13,14,17
5.7 12.5
50-150 37.0-111.0 5.7 12.5UFT-SP01 UFT-SP03 UFT-SP06 UFT-SP15
7 6AIR TOOLS GENERAL CATALOG
NOTES
(CONVERSION TABLE)TORQUE
Unit to be Nm kgf.cm kgf.m in.Ibs ft.Ibsconverted
1Nm - 10.2 0.102 8.8 0.74
1kgf.cm 0.098 - 0.01 0.868 0.072
1kgf.m 9.8 100 - 86.8 7.2
1in.Ibs 0.114 1.152 1.16×10-2 - 8.3×10-2
1ft.Ibs 1.36 13.83 0.138 12 -
LENGTHUnit to be m In Ftconverted
m 1 39 3.3
In 2.54×10-2 1 8.3×10-2
Ft 0.31 12.0 1
PRESSUREUnit to be MPa Bar kgf/cm2 psiconverted
MPa 1 10 10.2 1.44×102
Bar 10 1 1.02 14.4
kgf/cm2 9.8×10-2 0.98 1 14.1
psi 6.9×10-2 6.9×10-2 7.1×10-2 1
HORSE POWERUnit to be kw kgf m/s PS HPconverted
kw 1 1.02×102 1.36 1.34
kgf m/s 9.8×10-5 1 1.33×10-2 1.32×10-2
PS 0.74 75 1 0.99
HP 0.75 76 1.01 1
FLOWUnit to be m3/s m3/min I/s ft3/sconverted
m3/s 1 60 1.00×103 35
m3/min 1.67×10-2 1 17 0.59
I/s 1.00×10-3 6.0×10-2 1 3.5×10-2
ft3/s 2.8×10-2 1.7 28 1
WEIGHTUnit to be kg Ibsconverted
kg 1 2.2
Ibs 0.45 1
7 7AIR TOOLS GENERAL CATALOG
RUSS IA & C . I . S .
EUROPE
MIDDLE EAST
AS IA
AFR ICAOCEAN IA
SOUTH AMER ICA
NORTH AMER ICA
MIDDLE AMER ICA
CH INA
KOREA
SENDA I
NARA
HEAD OFF ICEFACTORYBUS INESS PLACE
KAMI J I
KYUSHU
H IROSH IMA
OKAYAMA
NAGOYA
OSAKA
TOYOTA
TOYOHASH I
KANAGAWA
K I TA -KANTO
TOKYO
WORLD
JAPAN
URYU NETWORKURYU Pneumatic Tools have gained markets with the highestsatisfaction of our customers not only island but also farabroad in more than 40 countries through a world-wide network of independent distributorswho offer tool inspection, repair,testing, maintenance and quick delivery.
top related