the proper installation of thin twin suspension shocks if one suspension shock goes bad, the other...
Post on 18-Jan-2018
218 Views
Preview:
DESCRIPTION
The Proper Installation of Thin Twin Suspension Shocks If the threads in the base are stripped, a 25 x 13 nut (same as the nut on top of the suspension shock) can be used to secure the shock to the base. It is recommended to use a locking washer along with the nut.
TRANSCRIPT
The Proper Installation of Thin Twin Suspension Shocks
• If one suspension shock goes bad, the other two have been stressed. All three shocks should be replaced at the same time.
The Proper Installation of Thin Twin Suspension Shocks
• Secure the shock to the base before securing it to the tub support.
• !! Only turn the bell housing !!• Use Loctite® on the threads.
The Proper Installation of Thin Twin Suspension Shocks
• If the threads in the base are stripped, a 25 x 13 nut (same as the nut on top of the suspension shock) can be used to secure the shock to the base. It is recommended to use a locking washer along with the nut.
top related