the versatile solution for efficient dredging and water construction

The versatile solution for efficient dredging and water construction

Watermaster is ideal for different shallow water applications

• Rivers, canals, industrial ponds and basins

• Watermaster can work in places where no other machine can operate

Typical working environments

Working depths

Suction dredging Backhoe dredging

All the work at one site

• Backhoe dredging, suction dredging and piledriving capabilities in one machine

• Changing from one working mode to another takes less than 30 minutes

All the work at one site with one machine

Suction dredging

Backhoe dredging

Pile driving

Watermaster has excellent mobilisation capabilities

• Transportable on public roads with a standard trailer

• Moves in and out of water and trailer without crane assistance

• Can operate in very shallow waters, wetlands and even on dry ground

• Cruises in water to the worksite with own propulsion system, no tugboats needed

Transportable on public roads with a standard trailer

Moves in and out of water and trailer without crane assistance

Can operate in very shallow waters, wetlands and even on dry ground

Own propulsion system

Independent working capabilities without tugboats and wire cables

• Work movement at worksite is created with excavator poom, spuds and propeller

• Independent dredging movement is created without anchors, wire cables and assisting vessels which block the passing water traffic

Machine modes

1. Transportation

2. Cruising

3. Operating

1

2

3

Watermasters high quality and service is based on serial production

Reliable factory back-up, training and after sales service

Production in ISO 9001 and ISO 14001 certified production plant

Economical efficiency and productivity

• Watermaster reduces investment and operational costs because

• There is no need for:– Separate excavators on pontoons – Separate suction dredgers – Crane or tugboat assistance– Vessels for anchorages and wire cable setting

• All capabilities are built in one machine operated by one operator

Watermaster does it all

Backhoe dredging

Rake

Clamshell bucket

400 and 700 l bucket

Suction dredging

Screen bucket

End of the pipeline

Cutter pump

Pile driving

Wood pile driving

Metal sheet driving

Pile driving

Technical specificationsMax suction dreging reach: 5,4 m

Weight: 17 tn

Operating width with sidepontoons: 5,3 m

Transport width: 3,3 m

Lenght: 10,4 m

Max pumping distance: 1,5 km

Cutter pump capacity against 10 m head: 650 m3/h

Cutter head diameter: 600 mm

Discharge line diameter: 225 mm

Max rear stabilizer reach: 4,9 m

Max front stabilizer reach: 3,5 m

Max excavation reach: 4,3 m

When you have a Watermaster…

– No need to invest in several vessels and their big operating costs

– Job finding is easy because the machine is capable of doing many kinds of works and in places where other vessels cannot

– Environment is saved because of Watermasters excellent mobilisation