threading the upper and lower part of sewing machine

THREADING THESewing Machine

THREADING THE UPPER PART OF

Sewing Machine

Order of threading in the upper parts:

1. Spool pin

2. Thread Guide

3. Between metal disc of tension

4. Thread take up lever

5. Thread guide

6. Lower thread guide

7. Threading the needle

Step 1: Put the spool of thread on the spool pin.

Step 2: Bring thread to thread guide.

Step 3: Pull the thread between the metal disc of

the tension.

Step 4: Bring the thread up to the thread take up lever

and raise it as it goes.

Step 5: Pull the thread down to the thread

guide.

Step 6: Pull it through the lower thread guide.

Step 7: Thread the needle.

THREADING THE LOWER PART OFSewing Machine

Step 1: Remove the bobbin case pulling on the bobbin

case latch.

Step 2: Remove the bobbin from the case and wind the

thread.

Step 3: Put the bobbin back to the bobbin case and pull the thread through the little slot at least 4 inches long.

Step 5: Be sure that you hear the case being locked upon inserting the bobbin

case inside the shuttle.

Step 6: Start the mechanism by rolling the balance wheel forward to get the thread of

the bobbin through the needle.

Step 1: Pull the upper and lower thread together by 4

inches.