to access mdas reports10. under billing tab, consumption data can be analyzed. particular date &...

To Access MDAS Reports

Kindly extract required meter readings from MDAS application which can be accessed through portal.

(Use Internet explorer browser only)

http://prdep.pspcl.in:50000/irj/portal

1. Enter Login ID and Password (Given by Data Center team)

2. Click on MDAS system

3. Click again on MDAS system as directed arrow

4. Click on below Secure Meter Date dropdown

5. Click on Integrator

6. Click on View Data -> Data Viewer

7. Select Meter type as “System Meter” and enter Meter serial number. Click on Next button

8. Select below checklist and click on Next button

9. Select date frame and click on Next

10. Under Billing tab, consumption data can be analyzed. Particular date & time can be selected

from right side navigation.

Find cumulative readings (readings shown are with MF) for consumer in Main Energy and TOD

energy for the date selected in right side panel above Go Button. Readings shown are with MF.

NOTE: Moreover, other data like TOD consumption, MDI, Load survey data etc can

also be visualized against various tabs as showing in above screenshot.

[For DT overload/unbalance report]

PFA the word file.

[DT MIS Report]

Global -> Reports -> View Report -> MIS Reports - Administrative Area -> (MIS Report of Distribution

Transformer- View Report) ->

Select Monthly and required month and year.

->Show Study

->Select the required study.

->(Wait till administrative area hierarchy appears)Select the required Area and then Click OK.

->Download Excel Report

http://prdep.pspcl.in:50000/irj/portal

Fill the user Id and Password, Then logon and go to “MDAS System” menu and click on as print screen

shows below.

After clicking on the MDAS System link MDAS page is appeared

Go to Enerlyser (MIS)

Go to Dashboard

Click Area wise DT Unbalance

Put From Date and To Date

Select Peak Hour Slot i) 06:00-09:00

ii) 18:00-21:00

iii) 19:00-22:00

Choose Administrative area (s) and Click OK button at the bottom of “Select Administrative Area

Section”.

Click Show Report

A notification comes to download the report and save it into your desktop

Double click on the report file and after open the file click the Yes button

Click on Pie Chart to extract complete details of Unbalanced/Overload DTs.

Pie Chart

Feeder Pie Chart

Substation Feeder

Feeder DT