triangulation with the disto using 2 points copyright © 2006 by distagage.com, all rights...
Post on 15-Jan-2016
214 Views
Preview:
TRANSCRIPT
Triangulation with the Disto Using
2 points
Copyright © 2006 by Distagage.com, All Rights Reserved.
The slides in this presentation will advance automatically. To manually advance/reverse the slides, use the navigation buttons
provided at the bottom of each slide
Click Here To Begin
X
Triangulation with the Disto Using 2 Points
Copyright © 2006 by Distagage.com, All Rights Reserved.
X
Triangulation with the Disto Using 2 Points
Copyright © 2006 by Distagage.com, All Rights Reserved.
Let’s look at a situation where we would like to determine the width (ft) of the front side of a house.
X
Triangulation with the Disto Using 2 Points
Copyright © 2006 by Distagage.com, All Rights Reserved.
Let’s look at a situation where we would like to determine the width (ft) of the front side of a house.
X
Triangulation with the Disto Using 2 Points
Copyright © 2006 by Distagage.com, All Rights Reserved.
Let’s look at a situation where we would like to determine the width (ft) of the front side of a house.
X
Triangulation with the Disto Using 2 Points
Copyright © 2006 by Distagage.com, All Rights Reserved.
Let’s look at a situation where we would like to determine the width (ft) of the front side of a house.
X
Triangulation with the Disto Using 2 Points
Copyright © 2006 by Distagage.com, All Rights Reserved.
?
Let’s look at a situation where we would like to determine the width (ft) of the front side of a house.
X
Triangulation with the Disto Using 2 Points
Copyright © 2006 by Distagage.com, All Rights Reserved.
X
Let’s call it “X”
X
Triangulation with the Disto Using 2 Points
Copyright © 2006 by Distagage.com, All Rights Reserved.
To determine “X,” we will use the “2-point Triangulation” method; also referred to as the “2-point Indirect Measurement” method.
X
Triangulation with the Disto Using 2 Points
Copyright © 2006 by Distagage.com, All Rights Reserved.
First, we call this a “2-point” measurement because it involves measuring to 2 distinct points.
X
Triangulation with the Disto Using 2 Points
Copyright © 2006 by Distagage.com, All Rights Reserved.
First, we call this a “2-point” measurement because it involves measuring to 2 distinct points.
Point 1
X
Triangulation with the Disto Using 2 Points
Copyright © 2006 by Distagage.com, All Rights Reserved.
Point 1 Point 2
First, we call this a “2-point” measurement because it involves measuring to 2 distinct points.
X
Triangulation with the Disto Using 2 Points
Copyright © 2006 by Distagage.com, All Rights Reserved.
Turn the Disto on
X
Triangulation with the Disto Using 2 Points
Copyright © 2006 by Distagage.com, All Rights Reserved.
Turn the Disto on
X
Triangulation with the Disto Using 2 Points
Copyright © 2006 by Distagage.com, All Rights Reserved.
Turn the Disto on
X
Triangulation with the Disto Using 2 Points
Copyright © 2006 by Distagage.com, All Rights Reserved.
Turn the Disto on
X
Triangulation with the Disto Using 2 Points
Copyright © 2006 by Distagage.com, All Rights Reserved.
Turn the Disto on
X
Triangulation with the Disto Using 2 Points
Copyright © 2006 by Distagage.com, All Rights Reserved.
Turn the Disto on
X
Triangulation with the Disto Using 2 Points
Copyright © 2006 by Distagage.com, All Rights Reserved.
Turn the Disto on
X
Triangulation with the Disto Using 2 Points
Copyright © 2006 by Distagage.com, All Rights Reserved.
Turn the Disto on
X
Triangulation with the Disto Using 2 Points
Copyright © 2006 by Distagage.com, All Rights Reserved.
Turn the Disto on
X
Triangulation with the Disto Using 2 Points
Copyright © 2006 by Distagage.com, All Rights Reserved.
Turn the Disto on … and press …
X
Triangulation with the Disto Using 2 Points
Copyright © 2006 by Distagage.com, All Rights Reserved.
Turn the Disto on … and press …
X
Triangulation with the Disto Using 2 Points
Copyright © 2006 by Distagage.com, All Rights Reserved.
Turn the Disto on … and press …
X
Triangulation with the Disto Using 2 Points
Copyright © 2006 by Distagage.com, All Rights Reserved.
Turn the Disto on … and press …
X
Triangulation with the Disto Using 2 Points
Copyright © 2006 by Distagage.com, All Rights Reserved.
Turn the Disto on … and press … to enter the 2-point mode.
X
Triangulation with the Disto Using 2 Points
Copyright © 2006 by Distagage.com, All Rights Reserved.
Turn the Disto on … and press … to enter the 2-point mode.
X
Triangulation with the Disto Using 2 Points
Copyright © 2006 by Distagage.com, All Rights Reserved.
Turn the Disto on … and press … to enter the 2-point mode.
X
Triangulation with the Disto Using 2 Points
Copyright © 2006 by Distagage.com, All Rights Reserved.
Turn the Disto on … and press … to enter the 2-point mode.
X
Triangulation with the Disto Using 2 Points
Copyright © 2006 by Distagage.com, All Rights Reserved.
Turn the Disto on … and press … to enter the 2-point mode.
X
Triangulation with the Disto Using 2 Points
Copyright © 2006 by Distagage.com, All Rights Reserved.
Turn the Disto on … and press … to enter the 2-point mode.
X
Triangulation with the Disto Using 2 Points
Copyright © 2006 by Distagage.com, All Rights Reserved.
Notice the blinking line.
X
Triangulation with the Disto Using 2 Points
Copyright © 2006 by Distagage.com, All Rights Reserved.
Notice the blinking line.
X
Triangulation with the Disto Using 2 Points
Copyright © 2006 by Distagage.com, All Rights Reserved.
Notice the blinking line.
X
Triangulation with the Disto Using 2 Points
Copyright © 2006 by Distagage.com, All Rights Reserved.
Notice the blinking line.
X
Triangulation with the Disto Using 2 Points
Copyright © 2006 by Distagage.com, All Rights Reserved.
Notice the blinking line. The Disto is now ready for the 1st measurement.
X
Triangulation with the Disto Using 2 Points
Copyright © 2006 by Distagage.com, All Rights Reserved.
Notice the blinking line. The Disto is now ready for the 1st measurement.
X
Triangulation with the Disto Using 2 Points
Copyright © 2006 by Distagage.com, All Rights Reserved.
Notice the blinking line. The Disto is now ready for the 1st measurement.
X
Triangulation with the Disto Using 2 Points
Copyright © 2006 by Distagage.com, All Rights Reserved.
Notice the blinking line. The Disto is now ready for the 1st measurement.
X
Triangulation with the Disto Using 2 Points
Copyright © 2006 by Distagage.com, All Rights Reserved.
Notice the blinking line. The Disto is now ready for the 1st measurement.
X
Triangulation with the Disto Using 2 Points
Copyright © 2006 by Distagage.com, All Rights Reserved.
Notice the blinking line. The Disto is now ready for the 1st measurement.
X
Triangulation with the Disto Using 2 Points
Copyright © 2006 by Distagage.com, All Rights Reserved.
Notice the blinking line. The Disto is now ready for the 1st measurement.
X
Triangulation with the Disto Using 2 Points
Copyright © 2006 by Distagage.com, All Rights Reserved.
Notice the blinking line. The Disto is now ready for the 1st measurement.
X
Triangulation with the Disto Using 2 Points
Copyright © 2006 by Distagage.com, All Rights Reserved.
Now, step back from the house ….
X
Triangulation with the Disto Using 2 Points
Copyright © 2006 by Distagage.com, All Rights Reserved.
Now, step back from the house …. to a distance that will allow you to clearly see both corners of the front side of the house ….
X
Triangulation with the Disto Using 2 Points
Copyright © 2006 by Distagage.com, All Rights Reserved.
Now, step back from the house …. to a distance that will allow you to clearly see both corners of the front side of the house ….
X
Triangulation with the Disto Using 2 Points
Copyright © 2006 by Distagage.com, All Rights Reserved.
Now, step back from the house …. to a distance that will allow you to clearly see both corners of the front side of the house ….
X
Triangulation with the Disto Using 2 Points
Copyright © 2006 by Distagage.com, All Rights Reserved.
Now, step back from the house …. to a distance that will allow you to clearly see both corners of the front side of the house ….
X
Triangulation with the Disto Using 2 Points
Copyright © 2006 by Distagage.com, All Rights Reserved.
And … move to the RIGHT edge of the house.
X
Triangulation with the Disto Using 2 Points
Copyright © 2006 by Distagage.com, All Rights Reserved.
And … move to the RIGHT edge of the house.
X
Triangulation with the Disto Using 2 Points
Copyright © 2006 by Distagage.com, All Rights Reserved.
And … move to the RIGHT edge of the house.
X
Triangulation with the Disto Using 2 Points
Copyright © 2006 by Distagage.com, All Rights Reserved.
And … move to the RIGHT edge of the house.
X
Triangulation with the Disto Using 2 Points
Copyright © 2006 by Distagage.com, All Rights Reserved.
And … move to the RIGHT edge of the house.
X
Triangulation with the Disto Using 2 Points
Copyright © 2006 by Distagage.com, All Rights Reserved.
And … move to the RIGHT edge of the house.
X
Triangulation with the Disto Using 2 Points
Copyright © 2006 by Distagage.com, All Rights Reserved.
And … move to the RIGHT edge of the house.
X
Triangulation with the Disto Using 2 Points
Copyright © 2006 by Distagage.com, All Rights Reserved.
The goal is to create a RIGHT ANGLE with the side of the house …..
X
Triangulation with the Disto Using 2 Points
Copyright © 2006 by Distagage.com, All Rights Reserved.
The goal is to create a RIGHT ANGLE with the side of the house …..
AND …. be in a straight line with the right-most edge of the house
X
Triangulation with the Disto Using 2 Points
Copyright © 2006 by Distagage.com, All Rights Reserved.
The goal is to create a RIGHT ANGLE with the side of the house …..
AND …. be in a straight line with the right-most edge of the house
X
Triangulation with the Disto Using 2 Points
Copyright © 2006 by Distagage.com, All Rights Reserved.
The goal is to create a RIGHT ANGLE with the side of the house …..
AND …. be in a straight line with the right-most edge of the house
X
Triangulation with the Disto Using 2 Points
Copyright © 2006 by Distagage.com, All Rights Reserved.
The goal is to create a RIGHT ANGLE with the side of the house …..
AND …. be in a straight line with the right-most edge of the house
X
Triangulation with the Disto Using 2 Points
Copyright © 2006 by Distagage.com, All Rights Reserved.
Point the Disto at the left-most edge and press the DIST key.
X
Triangulation with the Disto Using 2 Points
Copyright © 2006 by Distagage.com, All Rights Reserved.
Point the Disto at the left-most edge and press the DIST key.
X
Triangulation with the Disto Using 2 Points
Copyright © 2006 by Distagage.com, All Rights Reserved.
Point the Disto at the left-most edge and press the DIST key.
X
Triangulation with the Disto Using 2 Points
Copyright © 2006 by Distagage.com, All Rights Reserved.
Point the Disto at the left-most edge and press the DIST key.
X
Triangulation with the Disto Using 2 Points
Copyright © 2006 by Distagage.com, All Rights Reserved.
Point the Disto at the left-most edge and press the DIST key.
X
Triangulation with the Disto Using 2 Points
Copyright © 2006 by Distagage.com, All Rights Reserved.
Point the Disto at the left-most edge and press the DIST key.
X
Triangulation with the Disto Using 2 Points
Copyright © 2006 by Distagage.com, All Rights Reserved.
Point the Disto at the left-most edge and press the DIST key.
X
Triangulation with the Disto Using 2 Points
Copyright © 2006 by Distagage.com, All Rights Reserved.
Notice the blinking line on the display.
X
Triangulation with the Disto Using 2 Points
Copyright © 2006 by Distagage.com, All Rights Reserved.
Notice the blinking line on the display.
X
Triangulation with the Disto Using 2 Points
Copyright © 2006 by Distagage.com, All Rights Reserved.
Notice the blinking line on the display.
X
Triangulation with the Disto Using 2 Points
Copyright © 2006 by Distagage.com, All Rights Reserved.
Notice the blinking line on the display.
X
Triangulation with the Disto Using 2 Points
Copyright © 2006 by Distagage.com, All Rights Reserved.
The Disto is now ready for the 2nd measurement.
X
Triangulation with the Disto Using 2 Points
Copyright © 2006 by Distagage.com, All Rights Reserved.
The Disto is now ready for the 2nd measurement.
X
Triangulation with the Disto Using 2 Points
Copyright © 2006 by Distagage.com, All Rights Reserved.
The Disto is now ready for the 2nd measurement.
X
Triangulation with the Disto Using 2 Points
Copyright © 2006 by Distagage.com, All Rights Reserved.
The Disto is now ready for the 2nd measurement.
X
Triangulation with the Disto Using 2 Points
Copyright © 2006 by Distagage.com, All Rights Reserved.
Point the Disto at the right-most edge and press the DIST key.
X
Triangulation with the Disto Using 2 Points
Copyright © 2006 by Distagage.com, All Rights Reserved.
Point the Disto at the right-most edge and press the DIST key.
X
Triangulation with the Disto Using 2 Points
Copyright © 2006 by Distagage.com, All Rights Reserved.
Point the Disto at the right-most edge and press the DIST key.
X
Triangulation with the Disto Using 2 Points
Copyright © 2006 by Distagage.com, All Rights Reserved.
Point the Disto at the right-most edge and press the DIST key.
X
Triangulation with the Disto Using 2 Points
Copyright © 2006 by Distagage.com, All Rights Reserved.
Notice that the 2nd measurement appears on the screen.
X
Triangulation with the Disto Using 2 Points
Copyright © 2006 by Distagage.com, All Rights Reserved.
Notice that the 2nd measurement appears on the screen.
X
Triangulation with the Disto Using 2 Points
Copyright © 2006 by Distagage.com, All Rights Reserved.
Notice that the 2nd measurement appears on the screen.
X
Triangulation with the Disto Using 2 Points
Copyright © 2006 by Distagage.com, All Rights Reserved.
Notice that the 2nd measurement appears on the screen.
X
Triangulation with the Disto Using 2 Points
Copyright © 2006 by Distagage.com, All Rights Reserved.
Notice that the 2nd measurement appears on the screen.
X
Triangulation with the Disto Using 2 Points
Copyright © 2006 by Distagage.com, All Rights Reserved.
AND … the resulting measurement for “X” appears on the main line of the display.
Triangulation with the Disto Using 2 Points
Copyright © 2006 by Distagage.com, All Rights Reserved.
AND … the resulting measurement for “X” appears on the main line of the display.
40 ‘
X
Triangulation with the Disto Using 2 Points
Copyright © 2006 by Distagage.com, All Rights Reserved.
Important: Make sure the measurement on each edge is at the same relative position.
X
Triangulation with the Disto Using 2 Points
Copyright © 2006 by Distagage.com, All Rights Reserved.
Important: Make sure the measurement on each edge is at the same relative position.
X
Triangulation with the Disto Using 2 Points
Copyright © 2006 by Distagage.com, All Rights Reserved.
Important: Make sure the measurement on each edge is at the same relative position.
X
Triangulation with the Disto Using 2 Points
Copyright © 2006 by Distagage.com, All Rights Reserved.
Important: Make sure the reference point stays in the same exact place.
X
Triangulation with the Disto Using 2 Points
Copyright © 2006 by Distagage.com, All Rights Reserved.
Important: Make sure the reference point stays in the same exact place.
X
Triangulation with the Disto Using 2 Points
Copyright © 2006 by Distagage.com, All Rights Reserved.
Important: Make sure the reference point stays in the same exact place.
X
Triangulation with the Disto Using 2 Points
Copyright © 2006 by Distagage.com, All Rights Reserved.
The goal is to create a Right Triangle with the two measurements.
X
Triangulation with the Disto Using 2 Points
Copyright © 2006 by Distagage.com, All Rights Reserved.
The goal is to create a Right Triangle with the two measurements.
X
Triangulation with the Disto Using 2 Points
Copyright © 2006 by Distagage.com, All Rights Reserved.
The goal is to create a Right Triangle with the two measurements.
X
Triangulation with the Disto Using 2 Points
Copyright © 2006 by Distagage.com, All Rights Reserved.
The goal is to create a Right Triangle with the two measurements.
X
Triangulation with the Disto Using 2 Points
Copyright © 2006 by Distagage.com, All Rights Reserved.
The goal is to create a Right Triangle with the two measurements.
X
Triangulation with the Disto Using 2 Points
Copyright © 2006 by Distagage.com, All Rights Reserved.
The goal is to create a Right Triangle with the two measurements.
X
Triangulation with the Disto Using 2 Points
Copyright © 2006 by Distagage.com, All Rights Reserved.
Keeping the measurements LEVEL …
X
Triangulation with the Disto Using 2 Points
Copyright © 2006 by Distagage.com, All Rights Reserved.
Keeping the measurements LEVEL …
X
Triangulation with the Disto Using 2 Points
Copyright © 2006 by Distagage.com, All Rights Reserved.
Keeping the measurements LEVEL …
X
Triangulation with the Disto Using 2 Points
Copyright © 2006 by Distagage.com, All Rights Reserved.
Keeping the measurements LEVEL …
X
Triangulation with the Disto Using 2 Points
Copyright © 2006 by Distagage.com, All Rights Reserved.
AND … Keeping a solid, stationary REFERENCE POINT.
X
Triangulation with the Disto Using 2 Points
Copyright © 2006 by Distagage.com, All Rights Reserved.
AND … Keeping a solid, stationary REFERENCE POINT.
X
Triangulation with the Disto Using 2 Points
Copyright © 2006 by Distagage.com, All Rights Reserved.
AND … Keeping a solid, stationary REFERENCE POINT.
Copyright © 2006 by Distagage.com, All Rights Reserved.
The 2-point triangulation (or indirect measurement) function is available on the Disto A5, Disto A6, Disto Plus and Trimble HD150 models.
Triangulation with the Disto Using 2 Points
A5 A6Plus
Trimble HD150
Copyright © 2006 by Distagage.com, All Rights Reserved.
The 2-point triangulation feature is available on older Disto models such as the Disto Classic and Disto Pro series models.
Triangulation with the Disto Using 2 Points
Copyright © 2006 by Distagage.com, All Rights Reserved.
The procedures for using the triangulation feature with the older Disto models will differ slightly from the procedures provided in this demonstration.
Triangulation with the Disto Using 2 Points
Click Here to Exit
Copyright © 2006 by Distagage.com, All Rights Reserved.
top related