tru-pleat g - pecofacet · tru-pleat™g pleatedmicroglasselements...
Post on 06-Aug-2018
242 Views
Preview:
TRANSCRIPT
CORE TECHNOLOGY AName You Know...Filters You Can Trust ™
Max pH Max D.P.1 [psid]Media Temp. [F] Range 80F / 125F / 180F
Microglass 240 3 0 - 9 110/75/50
Tru-Pleat™ GPleated Microglass Elements
Tru-Pleat G elements feature microglass filtrationmedia. Designed specifically for micro-filtration,Tru-Pleat G elements are optimized to providehigh flow rates, and excellent contaminantloading capacity at absolute micron ratings. Endcaps, media, cores and netting are all thermallybonded providing a high degree of compatibilitywith a wide range of process fluids.
Tru-Pleat G elements are available with commonendcap configurations, such as double open end,single open end, 222 o-rings, 226 o-ring withlocking ears, fins, and core extenders. When youneed micro-filtration that performs, ask forTru-Pleat G.
T H E B O T T O M L I N E
• Synthetic HardwareImproved process compatibility over cellulose products.Ensures against failures that lead to untimely process upsets andshut-downs.
• Optimized Surface Area & ConfigurationAllows thorough usage of the filter media, translating intofewer element change-outs and reduced operations andmaintenance costs. Our microglass media offers higher porositythan polymeric medias. With more porosity you can expectlonger service life and lower energy demands.
• Common Sizes and End Cap StylesEasy installation in existing housings without modifications. Savescostly downtime and maintenance expenses associated withhousing modifications.
SPEC IF ICAT IONS
• Recommended change-out D.P. is 20 psid.• Normal flow direction is outside to inside
M A T E R I A L S
O P E R A T I N G D A T A
A P P L I C A T I O N S
• Gas ProcessingAmine and glycol
• Natural Gas Production & GatheringAmine, glycol, produced water, well completion fluids
• General IndustrialPre-R.O., well injection, bottle wash, water, solvents,acids, alkalis, alcohols
• IndustrialWater, solvents, acids, D.I., alcohols
• Food & BeverageWater, flavorings, beer, wine, vinegar
• MEDIA microglass
• CORE2 polyester
• OUTER NETTING polyester
• END CAPS polyester
• SPRINGS polypropylene, steel, stainless steel
• GASKET buna-n
• OPTIONS gasket materials, steel hardware,various support layer materials
Model O.D. I.D. Length Surface Area[in.] [in.] [in.] [ft2]
PS-209 2.5 1.08 9.75 3.7
PS-210 2.5 1.08 10 3.7
PS-219 2.5 1.08 19.5 7.3
PS-220 2.5 1.08 20 7.3
PS-229 2.5 1.08 29.25 11
PS-230 2.5 1.08 30 11
PS-240 2.5 1.08 40 14.5
PS-336 3.0 1.545 36 14.5
N OM I N A L D I M E N S I O N S
© 2009 PECOFacetPECOFacet has a policy of continuousproduct research and developmentand reserves the right to change designand specifications without notice.
Brought to you by PECOFaceta CLARCOR company
EL-TR-TD-02 7/10
Wolters Industrial Park / P.O. Box 640 / Mineral Wells, TX 76068Phone 940.325.2575 / 1.800.877.PECO / Fax 940.325.4622perryequipment.com / Email PECOElements@PECOFacet.com
CORE TECHNOLOGY
Tru-Pleat™ GPleated Microglass Elements
• Efficiency: 99.98% or beta 5000• Grade [µm]: 0.5, 2, 5, 10
P A R T I C L E R E T E N T I O N
O R D E R I N G I N F O R M A T I O N
1. Max. D.P. may be limited by the vessel manufacturer’s design.2. Carbon steel cores are installed in 336 size elements.3. Based on using polyester core and endcaps.
N O T E S
• Filter-Mart
• Fluitek
• FTC
• Gardner & Clark
R E P L A C EM E N T O P T I O N F O R
_ _ _230 10 F
GRADE[µm]
00 = 0.5
02 = 2
05 = 5
10 = 10
SIZE
PS CS1
MEDIA
F = FiberglassMISC.
B
GASKETSB = Buna
E = EPR
P = Polypropylene
S = Silicone
V = Fluorocarbon
A = DOE
C = 226/Finned
F = 222/Finned
J = 226/Closed
O = 222/Closed
E2 = s.s.spr / s.s. extension
E3 = p.p. spr / p.p. extension
E4 = c.s. spr / p.p. extension
E5 = s.s. spr / p.p. extension
E6 = c.s. spr / s.s.
M1 = DOE (steel)
S1 = 2.5" steel spring
S2 = 2.5" s.s. spring
S3 = 2" p.p. spring
X2 = s.s. extension
X2 = p.p. extension
END CAP STYLE
209
210
219
220
229
230
240
336
• Jonell JPMG Series
• Matrix
• Parker
• Royal
Diff
eren
tialP
ress
ure
[psi
d]
0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15
2.5
2.25
2
1.75
1.5
1.25
1
0.75
0.5
0.25
0
Tru-Pleat G™ Flow Chart at 1 cP
Flow Rate [gpm / 10" length]
0.5 [µm]
2 [µm]
5 [µm]
10 [µm]
• Not all combinationsare available. Consultcustomer service forverification if necessary.
• PECO Series 55, 56, 65, 66, Chemelean, and IndustrialHousing Series
• Other vessels designed for standard 2.5" and 3.0" O.D. elements.
V E S S E L S• Others
top related