ultracurv optical metrology solutions · ultrasurf 4x/5x pro tower 4i/6i ultracurv optitrace 5000...
Post on 12-Jul-2020
8 Views
Preview:
TRANSCRIPT
Grinding Polishing MeasuringAdvanced
ProcessDevelopment
UltraSurf Non-Contact Metrology System
PRO Tower Vertical Interferometer
UltraCURV Ultra-Accurate Spherometer
OptiTrace 5000 Contact Profilometer
Optical Metrology SolutionsPlanos, Spheres, Aspheres, & Freeforms
Training
SAVE TIME MAKE MONEY
Ground or Polished Planos and SpheresFlat or Steep Radius of Curvature
Cost-Effective Easy Operation
Computerized Universal Radius Verifier
Easy to use: Seamless integration with a laptop computerSetup assistance: Step-by-step procedure to calibrate & measure ROCFast setup on the shop floor or in the lab
Measure up to 200mm optics with a 3 point technique or with spherometer ringsSmall diameter workpiece adapter for measuring RoC of small lensesMeasure any RoC without an extensive test plate library
SAVE TIME MAKE MONEY
VERTICAL INTERFEROMETRY BENEFITSExceptionally stable platform designed to be used on the manufacturing floorAllows for stress-free measurementsMinimizes collision risksSafe changeover of expensive transmission spheres
Wavefront Measurement of Planos and SpheresRadius and Aspheric Measurement
Ergonomic Work Station for Safe and Easy Operation
Vertical Interferometer, Upward Looking
Fast in-process metrology or final metrologyServo driven Z-axis for fast and precise positioning (0.1 micron)Easy access to interferometer for service and maintenance
Available with CGH stage for aspheric measurementsUp to 300 mm workpiecesLab grade granite core with precision rails for accurate movement
UltraCURV
PRO Tower4i/6i PRO Tower with
CGH Stage
OptiTrace5000
UltraSurf4X/5X
PRO Tower4i/6i
UltraCURV
OptiTrace 5000
UltraCURV PRO Tower 4i/6i
UltraSurf 4X/5X
OptiPro Systems 6368 Dean ParkwayOntario NY, 14519
Phone: 585.265.0160 www.optipro.com
>Scan to watch
advanced optical metrology solutions
PRO Tower 4i/6i4 Inch or 6 Inch Vertical Interferometer
UltraCURVPrecision Spherometer
UltraFormUltraSmooth
Finishing
Table Top Unit Handheld Unit
Trusted Technology.Trusted Technology.
SAVE TIME MAKE MONEY
ZEISS Surfcom 5000 High Precision Contour Measurement
Ergonomic Environmental Enclosure
Y-Theta Air Bearing Unit for 2D & 3D Measurement
Custom Asphere Analysis Software From OptiPro
Fast and precise completion of contour measuring tasksUser friendly and simplified handling due to pull-down menusSimplified, programmed analysis via “Teaching/Playback” function
Large measuring range – up to 32 mm vertical, 200 mm x-axis2D and 3D measurement of aspheres, cylinders and freeform precision opticsHigh degree of data point acquisition and manipulation for various application requirements
QUALITY & RELIABILITY
SAVE TIME MAKE MONEYScan and measure a variety of different geometries, from planos to freeform opticsUltraSurf is capable of measuring aspheres and freeforms with radical departure, unlike existing products Scan a variety of materials, including optical glasses, ceramics, crystals and metals
Quick and easy setup allows operator to start measuring fast
UltraSurf4X 300
OptiTrace 5000Contact Profilometer
Simple or Unusually Shaped Optics
Exceptional Ergonomics
The Latest in CNC Non-Contact Optical Metrology
High Precision Non-Contact Metrology System
Specifications* OptiTrace 5000Horizontal axis (X-Axis)
Traversing length; Measuring rangeStraightness accuracyResolutionIndicated X accuracyTracing speedDetection principle
DetectorDetection principleResolutionMeasuring rangeIndicated Z accuracyMeasuring forceRadius of stylusMaterial of stylusTracing arm lift off
MiscellaneousPower supplyPower consumptionDimensionsDimensions of baseWeightStandard accessories
110, 120 Vac (50-60 Hz)Approx. 350 VA2100 mm width, 1500 mm height, 1000 mm depth600 mm width, 320 mm depthApprox. 350 kgCalibration device, gauge block, tools, diamond & ruby tip styli
Dual Beam Laser Interferometer0.31 nm13 mm, 26 mm, and 32 mm+ (0.2 +│H│/1000) μm0.75 mN2 μm diamond, 0.5 mm, 1.0 mm rubyDiamond (Option: ruby ball)Automatic system
Column axis (C-Axis)Traversing heightDrive speedDetection principle
Environment
Humidity
TemperatureAccuracy guaranteed
10-30°C20 + 2°C (without direct air movement)0.5°C / 1 hour (maximum rate of change)0.1°C / operation time
40-80% (without moisture)
500 mmVariable to 200 mm/sScale
200 mm0.05 + 3L/10000 μm0.54 nm+/- (0.2 μm+L/1000 mm)Variable from 0.03 mm/s to 60 mm/sScaleOptiTrace
5000
QUALITY & RELIABILITYHighest quality air bearings and linear motor technologyVariety of probe options allow for sub-micron single and dual surface scanning of precision optics
Innovative software provides comprehensive 3D and 2D contour analysis, surface figure, and surface texture analysis
Environmental enclosure reduces error from outside elements such as dust particles
UltraSurf5X 300
UltraSurf 4X and 5X4 or 5 Axis Non-Contact Metrology
UltraSurf 4X 300 UltraSurf 5X 300
UltraSurf 4X 300 Specifications* Travels X - Axis: Z - Axis: B - Axis: C - Axis:
Resolution: Linear: Rotary:
Max. Velocity: Linear: Rotary:
300mm200mm360° Continuous360° Continuous
5 nm0.05 arc-sec
20 mm/s100 RPM
Dual beam laser feedback and jeweled diamond stylus pivot maximize repeatability
Best class accuracy and resolution
Multiple data export formats allow seamless integration with standard optical fabrication platforms
Simultaneously measure the inside and outside surfaces of hemispherical domes
* Specifications subject to change. Contact OptiPro for the latest specifications.
OptiTrace Software with 3D Surface Error
Map Generation
* Specifications subject to change. Contact OptiPro for the latest specifications.
UltraSurf 5X 300 Specifications* Travels X - Axis: Y - Axis: Z - Axis: B - Axis: C - Axis:
Resolution: Linear: Rotary:
Max. Velocity: Linear: Rotary:
300mm200mm200mm360° Continuous360° Continuous
5 nm0.05 arc-sec
20 mm/s100 RPM
Trusted Technology. Trusted Technology.
SAVE TIME MAKE MONEY
ZEISS Surfcom 5000 High Precision Contour Measurement
Ergonomic Environmental Enclosure
Y-Theta Air Bearing Unit for 2D & 3D Measurement
Custom Asphere Analysis Software From OptiPro
Fast and precise completion of contour measuring tasksUser friendly and simplified handling due to pull-down menusSimplified, programmed analysis via “Teaching/Playback” function
Large measuring range – up to 32 mm vertical, 200 mm x-axis2D and 3D measurement of aspheres, cylinders and freeform precision opticsHigh degree of data point acquisition and manipulation for various application requirements
QUALITY & RELIABILITY
SAVE TIME MAKE MONEYScan and measure a variety of different geometries, from planos to freeform opticsUltraSurf is capable of measuring aspheres and freeforms with radical departure, unlike existing products Scan a variety of materials, including optical glasses, ceramics, crystals and metals
Quick and easy setup allows operator to start measuring fast
UltraSurf4X 300
OptiTrace 5000Contact Profilometer
Simple or Unusually Shaped Optics
Exceptional Ergonomics
The Latest in CNC Non-Contact Optical Metrology
High Precision Non-Contact Metrology System
Specifications* OptiTrace 5000Horizontal axis (X-Axis)
Traversing length; Measuring rangeStraightness accuracyResolutionIndicated X accuracyTracing speedDetection principle
DetectorDetection principleResolutionMeasuring rangeIndicated Z accuracyMeasuring forceRadius of stylusMaterial of stylusTracing arm lift off
MiscellaneousPower supplyPower consumptionDimensionsDimensions of baseWeightStandard accessories
110, 120 Vac (50-60 Hz)Approx. 350 VA2100 mm width, 1500 mm height, 1000 mm depth600 mm width, 320 mm depthApprox. 350 kgCalibration device, gauge block, tools, diamond & ruby tip styli
Dual Beam Laser Interferometer0.31 nm13 mm, 26 mm, and 32 mm+ (0.2 +│H│/1000) μm0.75 mN2 μm diamond, 0.5 mm, 1.0 mm rubyDiamond (Option: ruby ball)Automatic system
Column axis (C-Axis)Traversing heightDrive speedDetection principle
Environment
Humidity
TemperatureAccuracy guaranteed
10-30°C20 + 2°C (without direct air movement)0.5°C / 1 hour (maximum rate of change)0.1°C / operation time
40-80% (without moisture)
500 mmVariable to 200 mm/sScale
200 mm0.05 + 3L/10000 μm0.54 nm+/- (0.2 μm+L/1000 mm)Variable from 0.03 mm/s to 60 mm/sScaleOptiTrace
5000
QUALITY & RELIABILITYHighest quality air bearings and linear motor technologyVariety of probe options allow for sub-micron single and dual surface scanning of precision optics
Innovative software provides comprehensive 3D and 2D contour analysis, surface figure, and surface texture analysis
Environmental enclosure reduces error from outside elements such as dust particles
UltraSurf5X 300
UltraSurf 4X and 5X4 or 5 Axis Non-Contact Metrology
UltraSurf 4X 300 UltraSurf 5X 300
UltraSurf 4X 300 Specifications* Travels X - Axis: Z - Axis: B - Axis: C - Axis:
Resolution: Linear: Rotary:
Max. Velocity: Linear: Rotary:
300mm200mm360° Continuous360° Continuous
5 nm0.05 arc-sec
20 mm/s100 RPM
Dual beam laser feedback and jeweled diamond stylus pivot maximize repeatability
Best class accuracy and resolution
Multiple data export formats allow seamless integration with standard optical fabrication platforms
Simultaneously measure the inside and outside surfaces of hemispherical domes
* Specifications subject to change. Contact OptiPro for the latest specifications.
OptiTrace Software with 3D Surface Error
Map Generation
* Specifications subject to change. Contact OptiPro for the latest specifications.
UltraSurf 5X 300 Specifications* Travels X - Axis: Y - Axis: Z - Axis: B - Axis: C - Axis:
Resolution: Linear: Rotary:
Max. Velocity: Linear: Rotary:
300mm200mm200mm360° Continuous360° Continuous
5 nm0.05 arc-sec
20 mm/s100 RPM
Trusted Technology. Trusted Technology.
Grinding Polishing MeasuringAdvanced
ProcessDevelopment
UltraSurf Non-Contact Metrology System
PRO Tower Vertical Interferometer
UltraCURV Ultra-Accurate Spherometer
OptiTrace 5000 Contact Profilometer
Optical Metrology SolutionsPlanos, Spheres, Aspheres, & Freeforms
Training
SAVE TIME MAKE MONEY
Ground or Polished Planos and SpheresFlat or Steep Radius of Curvature
Cost-Effective Easy Operation
Computerized Universal Radius Verifier
Easy to use: Seamless integration with a laptop computerSetup assistance: Step-by-step procedure to calibrate & measure ROCFast setup on the shop floor or in the lab
Measure up to 200mm optics with a 3 point technique or with spherometer ringsSmall diameter workpiece adapter for measuring RoC of small lensesMeasure any RoC without an extensive test plate library
SAVE TIME MAKE MONEY
VERTICAL INTERFEROMETRY BENEFITSExceptionally stable platform designed to be used on the manufacturing floorAllows for stress-free measurementsMinimizes collision risksSafe changeover of expensive transmission spheres
Wavefront Measurement of Planos and SpheresRadius and Aspheric Measurement
Ergonomic Work Station for Safe and Easy Operation
Vertical Interferometer, Upward Looking
Fast in-process metrology or final metrologyServo driven Z-axis for fast and precise positioning (0.1 micron)Easy access to interferometer for service and maintenance
Available with CGH stage for aspheric measurementsUp to 300 mm workpiecesLab grade granite core with precision rails for accurate movement
UltraCURV
PRO Tower4i/6i PRO Tower with
CGH Stage
OptiTrace5000
UltraSurf4X/5X
PRO Tower4i/6i
UltraCURV
OptiTrace 5000
UltraCURV PRO Tower 4i/6i
UltraSurf 4X/5X
OptiPro Systems 6368 Dean ParkwayOntario NY, 14519
Phone: 585.265.0160 www.optipro.com
>Scan to watch
advanced optical metrology solutions
PRO Tower 4i/6i4 Inch or 6 Inch Vertical Interferometer
UltraCURVPrecision Spherometer
UltraFormUltraSmooth
Finishing
Table Top Unit Handheld Unit
Trusted Technology.Trusted Technology.
top related