venom - crw supply...venom tile & grout cleaner viper venom is used as a pre-treatment spray on...

viperVENOM

Tile & Grout Cleaner

VIPER VENOM is used as a pre-treatment spray on grout and tile to loosen and emulsify soils and stains, and to facili-tate soil removal using the SX-12 or SX-15 Grout and Tile Tool. Viper Venom is also effective for general floor clean-ing and upkeep, wall cleaning, and other general hard surface cleaning. Viper Venom, with its hard-hitting blend of build-ers, solvents, and surfactants, is also ideally suited for fire res-toration.

DIRECTIONS:

Grout and Tile restoration: Dilute Viper Venom with 1 part hot water. Low pressure spray onto grout and tile and allow to dwell for 5 minutes, but do not allow to dry before cleaning/extracting.

Grout and tile maintenance: Dilute Viper Venom with 16 parts warm water.

General cleaning and walls: Dilute Viper Venom with up to 32 parts warm water. Dilute 1 part Viper Venom with 9 parts water for woodwork. For cleaning porcelain and chrome: dilute 1 part Viper Venom with 12 parts water.

Hydro-Force | 4282 South 590 West Salt Lake City, UT 84123 www.hydroforce.com • (800)-637-3789

See Material Safety Data Sheet at www.hydroforce.com\msds for safety and regulatory information.

Available in Gallons and 4 x 1 gallon cases | 5 gallon pails | 55 gallon drums

Part # CR22GL Grout & Tile General Cleaning Fire Restoration

= Primary Use = Secondary Use

by

RTU ph - 12.0

• The industry’s #1 selling tile & grout cleaner

• Can be used on natural stone for restoration cleaning when rinsed effectively with SX-12 or SX-15 Hard Surface cleaner

• Excellent cleaner for fire and smoke damage cleaning of hard surfaces