waterguard i

WATERGUARD IHIGH PERFORMANCE, INSULATING

POLYMERISED WATER PROOF COATING

Benefits• Prepacked factory controlled, ensures consistent quality.

• Excellent resistance to water, provides good insulation

property (5ºC variation).

• Available in attractive white colour

• Can apply on horizontal and vertical surface.

• Excellent flexibility.

• Easy to apply.

• Excellent bonding with the cement base substrates.

ApplicationOn prepared surface apply two coats of WATERGUARD I by brush or

roller. Mixed WATERGUARD I should be used within 20 to 25 minutes after

mixing.

Packing & CoverageWATERGUARD I is prepacked two components of 10 kg powder + 5 kg

liquid.

CoverageWATERGUARD I is prepacked two components of 10 kg

powder + 5 kg liquid, specially designed polymer processed

cement and fillers, which covers approximately 5 to 7 m2

depends upon the substrates.

MixingWATERGUARD I to be preferably mix by mechanical mixer using electrical

drill and paddle attachment. Add powder slowly in the liquid, mix

continuously until a homogeneous mix obtained. WATERGUARD I can also

be mixed by hand but should ensure proper mixing.