welcome to preppy app, please follow the below step by ...€¦ · step- 4 – just search for...
Post on 09-Aug-2020
4 Views
Preview:
TRANSCRIPT
Welcome to Preppy app, please follow the below step by step guide to install
your Preppy app!!
Step-1 – Please make sure your tablet is compactable it must be installed
with Android 7.0 or above. If it is IOS it should be IOS 10 or above.
Step – 2 – Make sure you are connected to internet (WIFI)
Step- 3 - Open the paly store or App Store
Step- 4 – Just search for “Preppy App” or “Prepsafe” as start the installation
process
Step-5 – Once the installation is completed look for the highlighted App in
your App tray
Step-6- Move the App to your home screen for easy access
Step- 7 – Allowing permission for the app to work smoothly,
Settings > Apps > Locate the App and tap on the app
Step- 8 – Click on Permissions
The below screen will appear
Step – 9 – Allow permission to the below (Camera, Location, Storage)
Step – 10- Exit the screen and go back to your home page and launch the app
Step – 11 – Enter your user credentials (subxxxxx@prepsafe.com) &
Password – Subway#1 and start the app
Wait for few mins until the app load all your required credentials
Once all loaded successfully you will see the below page
Step - 12 – Connect the printer and switch on the power button,
Step – 13 – Open the printer with the 2 yellow clips on the side and load your
label roll
Step – 14 – Connect your printer via Bluetooth by following steps
Settings > Connections > Bluetooth
Step – 15 – Turn on your Bluetooth and scan for available devices and click on
the printer serial number
Your printer will print a paring pin code
Enter the pin and click ok, once successfully connected, go back to your home
page
Launch Preppy app and click on settings
Click on refresh
your printer serial number will appear on here
Step 16 – Scan your label QR code from the box, or you can enter manually,
once done DO NOT RESCAN, click on the above highlighted arrow to go back
to main page,
Well done you are now ready to use the app 😊
Click on use-by
Click on Veggies and choose required one
Click on the Team member and number of copies required and hit next
Click Print and that all enjoy preppy!! 😊
How to Add staff members ?
Go to settings on the app main screen and click on clerks
Click on the highlighted add icon
Your default password is 99 enter this and click ok
Screen Name - Enter your staff members name
Print Name – Enter their initials or short name
Tap to add photo and smile for the camera once done click save
Wait for the below screen and click ok
Preppy - Prep Made easy !!!
PREPsafe UK Ltd
15 Stratton Street, London, UK
W1J 8LQ
Phone – 020 3960 8787
Mobile – 079517 49664
Email – uksales@prepsafe.com
Website - www.prepsafe.com
top related