wera screwdrivers catalog
Post on 28-Jan-2015
147 Views
Preview:
DESCRIPTION
TRANSCRIPT
02 Screwdrivers
Kraftform Series 900 30
Kraftform Series 300 37
Kraftform Series Comfort 58
Kraftform Series Classic 65
Flagdriver, Stubbies 68
Accessories 70
Kraftform Micro Series 73
400 T-Handle Series 85
VDE Tools 90Kraftform Series 100 Kraftform Kompakt VDE Kraftform Series Comfort VDE Kraftform Series Classic VDE
ESD Tools 113
Screwdrivers
29
30
Kraftform Plus Series 900
31
Screwdrivers
32
A hexagon blade made out of high-quality bit material extends right through the handle – thereby ensuring full transfer of force, even when struck with a hammer. The ductile tempered material prevents the blade from splintering or breaking.
Ever misused a screwdriver?
The Chiseldriver is the solution whenever the job requires more than just screwdriving. It is suitable for fastening, chiselling and loosening seized screws or screw clamps. The Wera Chiseldriver: the screwdriver you need when the going gets tough!
An integrated impact cap lengthens the service life and reduces the danger of splintering. Nevertheless, always wear protective goggles.
33
The outstanding design of the Kraftform handle that fi ts perfectly into the hand. Prevents hand injuries such as blisters and calluses. Wera Kraftform: a synonym for "graspable" ergonomics!
The hexagonal non-roll feature prevents any annoying rolling away at the workplace.
Even higher torque can be transferred by connecting the square drive version to a T-handle, Zyklop ratchet or Bit Ratchet.
Greater torque can be transferred by fi tting an open-jaw or ring spanner over the integrated hex bolster.
The hard materials used for the handle ensure rapid hand repositioning without any danger of the skin "sticking" to the handle. The softer "anti-slip" zones provide increased grip, enabling the low–loss transfer of high forces.
Screwdrivers
?
Code mm mm mm mm mm mm
05018260002 0.6 3.5 4 80 81 9/64
" 3 1/8" 10
05018262002 0.8 4.5 5 8 90 98 0.178" 3 1/2" 10
05018264003 1.0 5.5 6 10 100 105 7/32
" 4" 10
05018266003 1.2 7.0 6 10 125 105 9/32
" 5" 10
05018268002 1.6 9.0 8 13 150 112 11/32
" 6" 10
05018270003 1.6 10.0 8 13 175 112 3/8" 7" 5
05018272002 2.0 12.0 10 16 200 117 1/2" 8" 2
05018274002 2.5 14.0 10 16 250 117 9/16
" 10" 2
Code mm mm mm mm mm mm
05018300002 0.8 4.5 5 8 100 98 0.178" 4 3/64
" 10
05018301002 1.0 5.5 6 10 103 105 7/32
" 4 1/16
" 10
05018302002 1.2 7.0 6 10 138 105 9/32
" 5 7/16
" 10
Code mm mm mm mm
05017005002 PH 1 5 8 80 98 3 1/8" 10
05017010002 PH 2 6 10 100 105 4" 10
05017015002 PH 3 8 13 150 112 6" 5
05017020003 PH 4 10 16 200 117 8" 2
34
Kraftform Plus – Series 900 The chiseldriver for fastening and chiselling
932 A Screwdriver for slotted screws
Application: Slotted screws Blade: Hexagonal throughout with impact cap, hexagonal bolster from
0.8 x 4.5 Design: Chrome-plated, Black Point Handle: Kraftform with non-roll feature, multi-component, sizes
2.0 x 12.0, 2.5 x 14.0: Kraftform with non-roll feature, Weralit II, single-component
932 AS Screwdriver for slotted screws
Application: Slotted screws Blade: Hexagonal throughout, impact cap with integrated square
socket for insertion of 1/4" blades for higher torque, hexagonal bolster
Design: Chrome-plated, Black Point Handle: Kraftform with non-roll feature, multi-component
917 SPH Screwdriver for Phillips screws
Application: Phillips screws Blade: Hexagonal throughout with impact cap, hexagonal bolster for
sizes 1 - 4 Design: Chrome-plated, Black Point Handle: Kraftform with non-roll feature, multi-component, size 4/200:
Kraftform with non-roll feature, Weralit II, single-component
Impact cap with square drive,directly connected to the blade
Even higher torque can be transferred by connecting the square drive version to a T-handle, Zyklop ratchet or Bit Ratchet.
A screwdriver is very often misused, in that it is struck with a hammer for light chiselling jobs or for loosening rusted screws. This is dangerous because conventional screwdrivers are not appropriate for work of that kind – the grip and/or blade could
splinter and cause injuries. The Wera Chiseldriver has been developed specifi cally for these applications. The head of the handle is fi tted with a robust, metal impact cap which is directly connected to the hexagonal blade that extends right through the handle. The full force of hammer blows is thereby transferred. The special, ductile tempering of the blade prevents any splintering and injuries. Even more force can be transferred when screwdriving by fi tting an open-jaw or ring spanner over the hex bolster.
Can the screwdriver occasionally be struck with a hammer?
?
?
Code mm mm mm mm
05017040002 PH 1 5 8 90 98 3 35/64
" 10
05017041002 PH 2 6 10 113 105 4 29/64
" 10
Code mm mm mm mm
05017050005 PZ 1 5 8 80 98 3 1/8" 10
05017052005 PZ 2 6 10 100 105 4" 10
05017054004 PZ 3 8 13 150 112 6" 5
05017056002 PZ 4 10 16 200 117 8" 2
Code mm mm mm mm
05024400003 TX 15 5 8 80 98 3 1/8" 10
05024401003 TX 20 5 8 90 98 3 1/2" 10
05024402003 TX 25 6 10 100 105 4" 10
05024403003 TX 27 6 10 125 105 5" 10
05024404003 TX 30 8 13 150 112 6" 10
05024405003 TX 40 8 13 150 112 6" 10
35
917 SPHS Screwdriver for Phillips screws
Application: Phillips screws Blade: Hexagonal throughout, impact cap with integrated square
socket for insertion of 1/4" blades for higher torque Design: Chrome-plated, Black Point Handle: Kraftform with non-roll feature, multi-component
918 SPZ Screwdriver for Pozidriv screws
Application: Suitable for Pozidriv*) screws Blade: Hexagonal throughout with impact cap, hexagonal bolster for
sizes 1 - 4 Design: Chrome-plated, Black Point Handle: Kraftform with non-roll feature, multi-component, size 4/200:
Kraftform with non-roll feature, Weralit II, single-component
*) Pozidriv = reg. trademark of Phillips Screw Company.
977 Screwdriver for TORX® screws
Application: TORX® socket screws Blade: Hexagonal throughout with impact cap, hexagonal bolster Design: Chrome-plated, Black Point Handle: Kraftform with non-roll feature, multi-component
Wera makes its Kraftform handles from several materials with different properties. The core is made from a hardwearing plastic that holds the blade securely even when subjected to great forces. The colour-coded soft zones of the external mantle consist of a softer
material with more friction resistance for high torque transfer. The black areas with a harder surface prevent the hand from sticking to the handle enabling you to adjust your grip more quickly.
Why is the Kraftform Plus handle made from several components?
Manual screwdriving can be quite painful work. Wera has developedthe Kraftform handle with a shape that fi ts snugly in the hand. An optimum positive fi t between the hand and the handle and the choice of materials prevent blisters, calluses and excessive strain. You’ll notice the
difference, especially when repositioning your hand on the handle.
How can I prevent blisters on my hands?
Screwdrivers
Code
05018283002 1917 SPHS 1 x PH 1x90; 1 x PH 2x113
932 A 1 x 0.6x3.5x80
932 AS 1 x 0.8x4.5x100; 1 x 1.0x5.5x103; 1 x 1.2x7.0x138
Code
05024410003 1977 TORX® 1 x TX 15x80; 1 x TX 20x90; 1 x TX 25x100; 1 x TX 27x125; 1 x TX 30x150; 1 x TX 40x150
Code
05018282006 1917 SPH 1 x PH 1x80; 1 x PH 2x100
932 A 1 x 0.6x3.5x80; 1 x 0.8x4.5x90; 1 x 1.0x5.5x100; 1 x 1.2x7.0x125
36
Kraftform Plus – Series 900The chiseldriver for fastening and chiselling
932 S/6 Screwdriver set Kraftform Wera: Chiseldriver and rack
Application: Slotted and Phillips screws, impact cap with integrated square socket for insertion of 1/4" blades for higher torque
Content: 6-piece set and rack in display carton
977/6 TORX® Screwdriver set Kraftform Wera: Chiseldriver and rack
Application: TORX®
Content: 6-piece set and rack in display carton
932/6 Screwdriver set Kraftform Wera: Chiseldriver and rack
Application: Slotted and Phillips screwsContent: 6-piece set and rack in display carton
37
Kraftform Plus Series 300Screwdrivers
38
Ever worked in a truly ergonomic manner?Kraftform Plus prevents injuries – even long-term.
Kraftform Plus screwdrivers enable a higher transfer of force with less eff ort and relieve the entire hand-arm system – even with intensive use. Combined with other technical and practical product advantages such as the Lasertip for a secure fi t in the screw head, Kraftform screwdrivers are the ideal choice for manual screwdriving jobs.
39
The basic idea for the prototype of the Kraftform handle – that the hand should dictate the design – has, right through to today, proved to be correct. In cooperation with the internationally recognised Fraunhofer-Institut, Wera developed a screwdriver handle designed to match the shape of the human hand as long ago as the 1960s. After a long development phase, the Wera Kraftform handle was launched to the market in 1968. It has been optimised through the years with new technologies, but has kept its proven shape. After all, the human hand has not changed either.
The large contact area – with particularly high friction to the soft zones – results in high torque transfer without any bruising from the edges.
The Kraftform handle functions superbly in all application situations, and it really has to. The application environment often does not allow any direct tool access.
The hard materials used for the handle ensure rapid hand repositioning without any danger of the skin "sticking" to the handle. The surrounding hard zones with large diameters glide like wheels across the hand.
The outstanding design of the Kraftform handle that fi ts perfectly into the hand prevents hand injuries such as blisters and calluses.
*) Pozidriv = reg. trademark of Phillips Screw Company.
Wera Lasertip "bites" itself into the screw head and prevents any slips out of the recess.It can be used for slotted, Phillips and Pozidriv*) screws.
Screwdrivers
40
A precisely-focused laser creates a sharp-edged surface structure.This laser treatment results in an edge hardness of up to 1000 HV 0.3.
The hexagonal non-roll feature prevents any rolling away at the workplace.
The Wera TORX® HF profi le (HF = Holding Function) securely holds TORX® screws on the tool tip thanks to its drive geometry and the wedging forces associated with this. Ideal for work in diffi cult-to-access areas e.g. screw connections in deep blind holes.
The screw symbol and tip size identifi cation markings on the handle make it easier to fi nd the right screwdriver in the tool case or at the workplace.
Wera Lasertip reduces the contact pressure required and enhances force transfer - meaning less screwdriving eff ort is required. Screwdriving becomes safer and easier.
The Wera Hex-Plus profi le with its improved geometry prevents damage to the heads of hexagonal socket screws. A higher torque transfer of up to 20 % is possible. This also makes screwdriving safer and more convenient.
41
Lasertip is also ideal for oily and greasy applications, circumstances that would otherwise favour the slipping out of the tool from the screw.
The screwdriver sets are always supplied with a wall-mountable rack. This ensures organised storage and quick access. The rack is also available as an individual item.
Screwdrivers
?
Code mm mm mm mm mm
05008006002 1) 0.4 2.0 60 70 2.5 5/64
" 2 3/8" 10
05110000004 1) 0.4 2.5 60 70 2.5 3/32
" 2 3/8" 10
05008007003 1) 0.4 2.5 75 70 2.5 3/32
" 3" 10
05008008002 1) 0.5 3.0 150 81 4.0 1/8" 6" 10
05008009002 1) 0.5 3.0 200 81 4.0 1/8" 8" 5
05110001004 1) 0.5 3.0 80 81 3.0 1/8" 3 1/
8" 10
05008015003 0.6 3.5 100 81 3.5 9/64
" 4" 10
05110002002 0.6 3.5 125 81 3.5 9/64
" 5" 10
05110003002 0.6 3.5 200 81 3.5 9/64
" 8" 5
05110004004 0.8 4.0 100 98 4.0 5/32
" 4" 10
05110005002 0.8 4.0 150 98 4.0 5/32
" 6" 10
05110006002 0.8 4.0 200 98 4.0 5/32
" 8" 5
05008027004 1) 0.8 4.0 300 98 4.0 5/32
" 12" 2
05110007003 1.0 5.5 125 98 5.5 7/32
" 5" 10
05008055002 1.0 5.5 150 98 5.5 7/32
" 6" 10
05110008002 1.0 5.5 200 98 5.5 7/32
" 8" 5
05008060002 1) 1.0 5.5 300 98 5.5 7/32
" 12" 2
05008061002 1.2 6.0 100 105 6.0 5/16
" 4" 10
Code mm mm mm mm mm
05007610002 0.8 5.0 100 98 5.0 3/16
" 4" 10
05007620002 1.0 6.0 125 105 6.0 1/4" 5" 10
05340330003 1.0 6.0 150 105 6.0 1/4" 6" 10
05110010003 1.2 6.5 150 105 6.0 1/4" 6" 10
05007635002 1.2 7.0 150 105 7.0 9/32
" 6" 10
05007621002 1.2 6.5 200 105 7.0 9/32
" 8" 5
05110011005 1.2 8.0 175 112 7.0 5/16
" 7" 5
05007640002 1.6 8.0 175 112 7.0 5/16
" 7" 5
05110104004 1.6 10.0 200 112 9.0 3/8" 8" 5
05110105003 1) 2.0 12.0 250 117 10.0 1/2" 10" 2
05018274001 2.5 14.0 250 117 16.0 9/16
" 10" 2
Code mm mm mm mm mm mm
05007670003 0.6 3.5 4 - 75 81 9/64
" 3" 10
05007671003 0.8 4.0 4 - 90 81 5/32
" 3 1/2" 10
05007672002 0.8 4.5 5 8 90 98 0.178" 3 1/2" 10
05007673003 1.0 5.5 6 10 100 98 7/32
" 4" 10
05007674002 1.2 6.5 6 10 125 105 1/4" 5" 10
05007675003 1.2 7.0 6 10 125 105 9/32
" 5" 10
05007676003 1.6 9.0 8 13 150 112 11/32
" 6" 10
05007677002 1.6 10.0 8 13 175 112 3/8" 7" 5
42
It happens time and time again that the tip slips out of the screw head when screwdriving, sometimes damaging valuable surfaces or even causing injury. The tips of the Wera Lasertip screwdrivers are microscopically roughened by means
of a laser. This rough surface literally "bites" itself fi rmly into the screw head. Slipping out becomes a thing of the past.
How to prevent the screwdriver from slipping out of the screw head
Kraftform Plus – Series 300 The right tool for every application
335 Screwdriver for slotted screws
Application: Slotted screws Blade: Round Design: Chrome-plated, Lasertip Handle: Kraftform with non-roll feature, multi-component
1) without Lasertip
334 Screwdriver for slotted screws
Application: Slotted screws Blade: Round Design: Chrome-plated, Lasertip Handle: Kraftform with non-roll feature, multi-component, sizes 2.0
x 12.0, 2.5 x 14.0: Kraftform with non-roll feature, Weralit II, single-component
1) without Lasertip
334 SK Screwdriver for slotted screws
Application: Slotted screws Blade: Hexagonal with bolster from 0.8 x 4.5 Design: Chrome-plated, Lasertip Handle: Kraftform with non-roll feature, multi-component
? Code mm mm mm mm mm
05008069002 0.4 2.5 75 98 2.5 5/64
" 3" 10
05008070002 0.6 3.5 100 81 3.5 9/64
" 4" 10
05008075002 0.8 4.0 100 98 4.0 5/32
" 4" 10
05008080002 1.0 5.5 150 98 5.5 7/32
" 6" 10
Code mm mm mm
05008705004 1) PH 0 60 81 3.0 2 3/8" 5
05008706002 1) PH 0 100 81 3.0 4" 5
05008710003 PH 1 80 98 4.5 3 1/8" 10
05008712003 PH 1 200 98 4.5 8" 2
05008715002 1) PH 1 300 98 4.5 12" 2
05008720003 PH 2 100 105 6.0 4" 10
05008723002 PH 2 150 105 6.0 6" 10
05008725002 PH 2 200 105 6.0 8" 2
05008730006 1) PH 2 300 105 6.0 12" 2
05008735003 PH 3 150 112 8.0 6" 5
05008740002 1) PH 4 200 112 10.0 8" 2
Code mm mm mm mm
05008750003 1) PH 0 4 60 81 2 3/8" 5
05008751003 PH 1 5 8 80 98 3 1/8" 10
05008752003 PH 2 6 10 100 105 4" 10
05008753002 PH 3 8 13 150 112 6" 5
43
Wera makes its Kraftform handles from several materials with different properties. The core is made from a hardwearing plastic that holds the blade securely even when subjected to great forces. The colour-coded soft zones of the external mantle
consist of a softer material with more friction resistance for high torque transfer. The black areas with a harder surface prevent the hand from sticking to the handle enabling you to adjust your grip more quickly.
Why is the Kraftform Plus handle made from several components?
335 FK Screwdriver for slotted screws
Application: Actuating tool for spring-loaded terminal blocks in switch cabinet construction
Blade: Round Design: Chrome-plated, Black Point Handle: Kraftform with non-roll feature, multi-component
350 PH Screwdriver for Phillips screws
Application: Phillips screws Blade: Round Design: Chrome-plated, Lasertip Handle: Kraftform with non-roll feature, multi-component
1) without Lasertip
350 SK PH Screwdriver for Phillips screws
Application: Phillips screws Blade: Hexagonal, sizes 1 - 3 with bolster Design: Chrome-plated, Lasertip Handle: Kraftform with non-roll feature, multi-component
1) without Lasertip
Screwdrivers
Code
05073700002 3 1441 2 x 4.5 - 6.0x41.0
350 PH 1 x PH 1x80; 1 x PH 2x100
44
350 PH1/2 + 1441 SB
Application: Attachment with holding function for screws, holds all screw profi les and sizes securely on the tool, suitable for round and hexagon blades with a diameter from 4.5 mm to 6 mm
Design: Elastomer
Kraftform Plus – Series 300 The right tool for every application
Push the screw gripper onto the tip of the screwdriver until the end of the blade protrudes from the rubber blade holder.
Attach the screw to the tip of the blade and secure it in the screw gripper.
Pull the screw gripper towards the screwdriver handle until the two arms of the gripper sit against the head of the screw and are spread slightly apart. The Wera screw gripper releases the screw automatically after it has been fastened.
The two gripper arms spread further apart as they are pushed against thesurface and automatically snap back when the head of the screw is countersunk.
When fastening screws in blind holes the screw gripper is pushed back, making it possible to reach even deep-seated screws.
And this is how the gripper works:
Code mm mm mm
05009305003 1) PZ 0 60 81 3.0 2 3/8" 10
05009310003 PZ 1 80 98 4.5 3 1/8" 10
05009312002 PZ 1 200 98 4.5 8" 2
05009313002 1) PZ 1 300 98 4.5 12" 2
05009315003 PZ 2 100 105 6.0 4" 10
05009317002 PZ 2 200 105 6.0 8" 2
05347743002 PZ 2 250 105 6.0 10" 2
05009319002 1) PZ 2 300 105 6.0 12" 2
05009320002 PZ 3 150 112 8.0 6" 5
05009325002 1) PZ 4 200 112 10.0 8" 2
Code mm mm mm mm
05009340002 1) PZ 0 4 60 81 2 3/8" 5
05009341003 PZ 1 5 8 80 98 3 1/8" 10
05009342003 PZ 2 6 10 100 105 4" 10
05009343002 PZ 3 8 13 150 112 6" 5
Code
05073701002 31441 2 x 4.5 - 6.0x41.0
355 PZ 1 x PZ 1x80; 1 x PZ 2x100
45
355 PZ Screwdriver for Pozidriv screws
Application: Suitable for Pozidriv*) screwsBlade: RoundDesign: Chrome-plated, LasertipHandle: Kraftform with non-roll feature, multi-component
1) without Lasertip*) Pozidriv = reg. trademark of Phillips Screw Company.
355 SK PZ Screwdriver for Pozidriv screws
Application: Suitable for Pozidriv*) screwsBlade: Hexagonal, sizes 1 - 3 with bolsterDesign: Chrome-plated, LasertipHandle: Kraftform with non-roll feature, multi-component
1) without Lasertip*) Pozidriv = reg. trademark of Phillips Screw Company.
355 PZ1/2 + 1441 SB
Application: Attachment with holding function for screws, holds all screw profiles and sizes securely on the tool, suitable for round and hexagon blades with a diameter from 4.5 mm to 6 mm
Design: Elastomer
Screwdrivers
Individual grippers please see page 72, 360.
? Code mm mm mm mm
05023105002 2.0 75 70 3.0 3" 5
05023107002 2.5 75 81 3.0 3" 10
05023110003 3.0 75 81 4.0 3" 10
05023115003 4.0 75 98 5.0 3" 10
05023120003 5.0 80 105 6.0 3 1/8" 10
05023125004 6.0 80 105 7.0 3 1/8" 5
05023130004 8.0 100 112 10.0 4" 5
05023135002 10.0 100 112 12.0 4" 5
Code mm mm mm
05022795005 1.5 60 70 2 3/8" 10
05022800004 2.0 100 70 4" 10
05138070003 2.5 100 81 4" 10
05022805005 3.0 100 81 4" 10
05022810006 4.0 100 98 4" 10
05022815005 5.0 100 105 4" 10
05022820005 6.0 125 105 5" 5
05022825005 8.0 150 112 6" 5
05022830004 10.0 150 112 6" 5
05022835003 12.0 150 117 6" 5
05022905002 5/32
" 100 98 4" 5
05022910002 3/16
" 100 105 4" 5
05022915002 7/32
" 100 105 4" 5
05022920002 1/4" 125 105 5" 5
05022925002 5/16
" 150 112 6" 5
05022930002 3/8" 150 112 6" 5
05022935002 1/2" 150 117 6" 5
46
The spherical drive profi le means that it is possible to swivel the axis of the tool to that of the screw, and therefore enable angled, "around-the-corner" screwdriving jobs. This ball tip geometry – often found on L-keys – is now available on a number of Wera bits.
TORX® ball tip and hexagon ball tip
Hexagon socket screws are a problem, because the contact surfaces that transfer the force of the tool to the screw are very narrow. The consequence: the head of the screw can be damaged, usually rounding out the recess.
Hex-Plus tools have larger contact surfaces to prevent this, driving from the fl ats of the recess, rather than the corners. Good to know: Hex-Plus tools fi t into every standard hexagon socket screw!
How to prevent rounded screw heads with Hex-Plus
354 Screwdriver for hexagon socket screws
Application: Hexagon socket screws Blade: Round Design: Hex-Plus, chrome-plated Handle: Kraftform with non-roll feature, multi-component
Kraftform Plus – Series 300 The right tool for every application
352 Ball end screwdriver for hexagon socket screws
Application: Hexagon socket screws Blade: Hexagonal Design: Ball end hexagon, chrome-plated, Black Point Handle: Kraftform with non-roll feature, multi-component, sizes W/F
12.0, W/F 1/2": Kraftform with non-roll feature, Weralit II, single-component
?
Code mm mm mm
05028048003 TX 8 60 81 3.5 2 3/8" 10
05028049003 TX 9 60 81 4.0 2 3/8" 10
05028050004 TX 10 80 81 4.0 3 1/8" 10
05028051004 TX 15 80 98 4.0 3 1/8" 10
05028052004 TX 20 100 98 4.5 4" 10
05028053004 TX 25 100 105 5.0 4" 10
05028054002 TX 27 115 105 5.5 4 9/16
" 10
05028055004 TX 30 115 105 6.0 4 9/16
" 10
05028056002 TX 40 130 112 7.0 5 3/16
" 10
Code mm mm mm
05028070002 TX 20 300 98 4.5 12" 4
05028071002 TX 25 300 105 6.0 12" 4
05028072002 TX 27 300 105 6.0 12" 4
05028073002 TX 30 300 105 6.0 12" 4
Code mm mm mm
05028000003 TX 5 60 70 3.5 2 3/8" 10
05028001003 TX 6 60 70 3.5 2 3/8" 10
05028002003 TX 7 60 70 3.5 2 3/8" 10
05028003003 TX 8 60 81 3.5 2 3/8" 10
05028004003 TX 9 60 81 4.0 2 3/8" 10
05028005004 TX 10 80 81 4.0 3 1/8" 10
05028008004 TX 15 80 98 4.0 3 1/8" 10
05028010004 TX 20 100 98 4.5 4" 10
05028012004 TX 25 100 105 5.0 4" 10
05028013004 TX 27 115 105 5.5 4 9/16
" 10
05028015004 TX 30 115 105 6.0 4 9/16
" 10
05028020005 TX 40 130 112 7.0 5 1/8" 10
05028025004 TX 45 130 112 8.0 5 1/8" 10
47
In tight assembly or disassembly situations, for example in engine compartments, it is not possible to securely hold the screw with the hand on the screwdriver, and the screw subsequently often gets lost. Lengthy searches or the loss of the
screw (with the associated danger that could bring about) are the consequence. The TORX® HF tools developed by Wera are ideal because they feature an optimised geometry of the original TORX® profi le. The wedging forces resulting from the surface pressure between the drive tip and the screw profi le mean that the screw is securely held on the tool!
What is the purpose of the TORX® HF profi le?
367 TORX® HF screwdriver with holding function for TORX® screws
Application: TORX® socket screws Blade: Round Design: Holding function for TORX® screws made according to Acument
Intellectual Properties specifi cations, chrome-plated Handle: Kraftform with non-roll feature, multi-component
367 TORX® HF screwdriver with holding function for TORX® screws
Application: TORX® socket screws Blade: Round Design: Holding function for TORX® screws made according to Acument
Intellectual Properties specifi cations, chrome-plated, extra long blade to enable work on low-down, diffi cult to access screws
Handle: Kraftform with non-roll feature, multi-component
367 TORX® screwdriver for TORX® screws
Application: TORX® socket screws Blade: Round Design: Chrome-plated, Black Point Handle: Kraftform with non-roll feature, multi-component
Screwdrivers
?
Code mm mm mm
05027950004 TX 15 80 98 4.0 3 1/8" 5
05027952004 TX 20 100 98 4.5 4" 5
05027954005 TX 25 100 105 5.0 4" 5
05027956004 TX 27 115 105 5.5 4 9/16
" 5
05027958004 TX 30 115 105 6.0 4 9/16
" 5
05027960003 TX 40 130 112 7.0 5 3/16
" 5
05027962002 TX 45 130 112 8.0 5 3/16
" 5
Code mm mm mm
05138257002 TX 7 60 70 3.5 2 3/8" 5
05138258002 TX 8 60 81 3.5 2 3/8" 5
05138259002 TX 9 60 81 4.0 2 3/8" 5
05138267002 TX 9 300 81 4.0 12" 5
05138260002 TX 10 80 81 4.0 3 1/8" 5
05138268002 TX 10 300 81 4.0 12" 5
05138261004 TX 15 80 98 4.0 3 1/8" 5
05138269002 TX 15 300 98 4.0 12" 2
05138262004 TX 20 100 98 4.5 4" 5
05138270002 TX 20 300 98 4.5 12" 2
05138263002 TX 25 100 105 5.0 4" 5
05138264002 TX 27 115 105 5.5 4 9/16
" 5
05138265002 TX 30 115 105 6.0 4 9/16
" 5
05138266002 TX 40 130 112 7.0 5 3/16
" 5
Code mm mm mm
05028029003 5 IP 60 70 3.5 2 3/8" 5
05028030003 6 IP 60 70 3.5 2 3/8" 5
05028031003 7 IP 60 70 3.5 2 3/8" 5
05028032003 8 IP 60 70 3.5 2 3/8" 5
05028033003 9 IP 60 81 4.0 2 3/8" 5
05028034003 10 IP 80 81 4.0 3 1/8" 5
05028035003 15 IP 80 98 4.0 3 1/8" 5
05028036003 20 IP 100 98 4.5 4" 5
05028037003 25 IP 100 105 5.0 4" 5
05028028002 27 IP 115 105 5.5 4 9/16
" 5
05028038003 30 IP 115 105 6.0 4 9/16
" 5
05028039002 40 IP 130 112 7.0 5 3/16
" 5
48
TORX® tools with a borehole prevent the unauthorised unfastening of safety screws. The screws contain a pin that protrudes into the drive profi le so that "normal" TORX® tools cannot be used. This pin fi ts into the borehole of TORX® BO tools allowing safety screws to be
unfastened.
TORX® with borehole
367 K Ball end TORX® screwdriver for TORX® screws
Application: TORX® socket screws Blade: Round Design: Ball end, chrome-plated, Black Point Handle: Kraftform with non-roll feature, multi-component
367 TORX® BO screwdriver for tamper-proof TORX®
screws
Application: TORX® screws with safety pin (BO = with bore hole) Blade: Round Design: Bore hole in TORX® section, chrome-plated, Black Point Handle: Kraftform with non-roll feature, multi-component
Kraftform Plus – Series 300 The right tool for every application
367 TORX PLUS® screwdriver for TORX PLUS® screws
Application: TORX PLUS® socket screws Blade: Round Design: Chrome-plated, Black Point Handle: Kraftform with non-roll feature, multi-component
TORX®
Code mm mm mm mm
05028130002 6 80 98 4.5 3 1/8" 5
05028132002 8 100 105 6.0 4" 5
05028134002 10 100 105 6.0 4" 5
05028136002 1/4" 125 112 8.0 5" 5
Code mm mm mm
05117680003 # 00 60 81 3.5 2 3/8" 5
05117681003 # 0 60 81 4.0 2 3/8" 5
05117682003 # 1 80 98 4.5 3 1/8" 5
05117683003 # 1 200 98 4.5 8" 5
05117684003 # 2 100 105 6.0 4" 5
05117685003 # 2 200 105 6.0 8" 5
05117691003 # 2 300 105 6.0 12" 2
05117686003 # 3 150 112 8.0 6" 5
05117687004 # 4 200 112 8.0 8" 5
05117688002 # 01 25 54 4.5 1" 5
05117689002 # 02 25 54 6.0 1" 5
?W
era
TORQ
-SET
® M
plus
TORQ
-SET
®
49
Compared with the "normal" TORX® profi le, the elliptical instead of circular profi le enlarges the 6 fl anks that transfer torque between the tool and the screw. This means that the force applied when screwdriving is spread across a larger surface area. Higher torque is transferred and, in addition, the service life of the screw and tool are lengthened. The so-called centre-lock screws on cutting tools represent a typical use of this type of screw profi le. The thermal infl uences on such holders for carbide insert tips often "bake" the retaining screws so fi rmly that it is important to have a profi le that considerably enhances the loosening torque capability of the screws. For this reason a torque-stable screw profi le is necessary to avoid any possible damage to the screw and to exclude the possibility of an otherwise costly machine downtime.
TORX PLUS®
371 TORQ-SET® Mplus screwdriver for TORQ-SET® screws
Application: TORQ-SET® screws Blade: Round Design: Mplus for higher breaking torque and longer service life,
chrome-plated Handle: Kraftform with non-roll feature, multi-component
368 Screwdriver for square socket head screws
Application: Square socket screws Blade: Round Design: Chrome-plated, Black Point except for sizes 01+02 Handle: Kraftform with non-roll feature, multi-component, # 2/300,
# 01/25, # 02/25: Weralit II, single-component
Wera developed the Mplus profi le with stronger fl anks compared with tools with a conventional TORQ-SET® profi le. This results in approximately 70 % extra torsional strength and greatly extends the service life of Wera Mplus tools.
How can I prevent frequent breakages of TORQ-SET® bits?
Screwdrivers
Code mm mm mm
05028116003 0 80 81 3.5 3 1/8" 5
05028118003 1 80 81 3.5 3 1/8" 5
05028120004 2 80 98 4.5 3 1/8" 5
05028122004 3 80 98 4.5 3 1/8" 5
05028124004 4 100 98 6.0 4" 5
05028126003 5 100 98 6.0 4" 5
Code mm mm mm mm
05029460002 5.0 70 98 7.2 2 25/32
" 5
05029461002 5.5 70 98 7.2 2 25/32
" 5
05029462002 6.0 70 98 7.2 2 25/32
" 5
05029463002 7.0 80 105 7.2 3 5/32
" 5
05029464002 8.0 80 105 9.3 3 5/32
" 5
05029465002 10.0 80 112 9.3 3 5/32
" 5
05029466002 13.0 80 112 11.0 3 5/32
" 5
Code mm mm mm
05029501002 3/16
" 70 98 7.2 2 25/32
" 5
05029502002 1/4" 70 98 7.2 2 25/
32" 5
05029503002 5/16
" 80 105 9.3 3 5/32
" 5
05029504004 11/32
" 80 105 9.3 3 5/32
" 5
05029505002 3/8" 80 112 9.3 3 5/
32" 5
05029506002 7/16
" 80 112 11.0 3 5/32
" 5
05029507002 1/2" 80 112 11.0 3 5/
32" 5
?
50
375 TRI-WING® screwdriver for TRI-WING® screws
Application: TRI-WING® screws Blade: Round Design: Chrome-plated, Black Point Handle: Kraftform with non-roll feature, multi-component
395 HO Nutdriver
Application: Hexagon headed bolts, screws and nuts Blade: Round Design: Hollow shaft for protruding threaded rods, chrome-plated Handle: Kraftform with non-roll feature, multi-component TIP: The hollow shaft enables seized screws or those on long
threads to be tightened and loosened
Kraftform Plus – Series 300 The right tool for every application
395 HO Nutdriver, imperial
Application: Hexagon headed bolts, screws and nuts Blade: Round Design: Chrome-plated, hollow shaft for protruding threaded rods Handle: Kraftform with non-roll feature, multi-component TIP: The hollow shaft enables seized screws or those on long
threads to be tightened and loosened
A screwdriver with a hollow shaft is needed whenever there are screwdriving jobs involving threaded rods i.e. the threaded rod through the nut can slip into the hollow shaft of the screwdriver.
What is the purpose of a screwdriver with hollow shaft?
Code
05105650006 1 334 1 x 1.2x6.5x150
335 1 x 0.5x3.0x80 1); 1 x 0.8x4.0x100; 1 x 1.0x5.5x125
350 PH 1 x PH 1x80; 1 x PH 2x100
Code
05007680003 1 334 SK 1 x 0.6x3.5x75; 1 x 0.8x4.0x90; 1 x 1.0x5.5x100; 1 x 1.2x6.5x125
350 SK PH 1 x PH 1x80; 1 x PH 2x100
Code
05346278001 1 334 1 x 1.2x6.5x150
334 SK 1 x 1.2x6.5x125
335 1 x 0.5x3.0x80 1); 1 x 1.0x5.5x150; 1 x 1.2x6.0x100
350 PH 1 x PH 1x80; 1 x PH 2x100
?
51
334/6 Rack screwdriver set Kraftform Plus Lasertip + rack
Lasertip round blades and rack Application: Slotted and Phillips screws Content: 6-piece set and rack in display carton
1) without Lasertip
334 SK/6 Rack screwdriver set Kraftform Plus Lasertip + rack
Lasertip hexagon blades and rack Application: Slotted and Phillips screws Content: 6-piece set and rack in display carton
334/335/350/7 Rack screwdriver set Kraftform Plus Lasertip + rack
Lasertip round blades + rack Application: Slotted and Phillips screws Content: 7-piece set and rack in display carton
1) without Lasertip
Hexagon
Wera makes its Kraftform handles from several materials with different properties. The core is made from a hardwearing plastic that holds the blade securely even when subjected to great forces. The colour-coded soft zones of the external mantle
consist of a softer material with more friction resistance for high torque transfer. The black areas with a harder surface prevent the hand from sticking to the handle enabling you to adjust your grip more quickly.
Why is the Kraftform Plus handle made from several components?
Screwdrivers
Code
05346300001 1350 PH 1 x PH 1x80; 1 x PH 2x100; 1 x PH 3x150; 1 x PH 4x200 1)
Stubby PH 1 x PH 02x25
Code
05346301001 1355 PZ 1 x PZ 1x80; 1 x PZ 2x100; 1 x PZ 3x150; 1 x PZ 4x200 1)
Stubby PZ 1 x PZ 02x25
Code
05346302001 1334 1 x 0.8x5.0x100; 1 x 1.2x6.5x150; 1 x 1.2x8.0x175; 1 x 1.6x10.0x200
336 Stubby 1 x 1.2x6.5x25
Code
05347901001 1334 1 x 1.2x6.5x150
335 1 x 0.4x2.5x60 1); 1 x 0.5x3.0x80 1); 1 x 0.6x3.5x100; 1 x 0.8x4.0x100; 1 x 1.0x5.5x125
350 PH 1 x PH 0x60 1); 1 x PH 1x80; 1 x PH 2x100; 1 x PH 3x150
368 1 x # 1x80; 1 x # 2x100
52
Kraftform Plus – Series 300The right tool for every application
350/5 Screwdriver set Kraftform Plus Lasertip
Application: Phillips screwsContent: 5-piece set
1) without Lasertip
355/5 Screwdriver set Kraftform Plus Lasertip
Application: Pozidriv*) screwsContent: 5-piece set
1) without Lasertip*) Pozidriv = reg. trademark of Phillips Screw Company.
334/336/5 Screwdriver set Kraftform Plus Lasertip
Application: Slotted screwsContent: 5-piece set
334/368/12 screwdriver set Kraftform Plus
Application: Slotted, Phillips-Recess and square socket screwsContent: 12-piece set
1) without Lasertip
Code
05347778001 1334 1 x 1.2x6.5x150
335 1 x 0.8x4.0x100
350 PH 1 x PH 1x80; 1 x PH 2x100
368 1 x # 1x80; 1 x # 2x100
Code
05223161002 1367 TORX® HF 1 x TX 8x60; 1 x TX 10x80; 1 x TX 15x80; 1 x TX 20x100; 1 x TX 25x100; 1 x TX 27x115; 1 x TX 30x115
Code
05345221001 1367 TORX® HF 1 x TX 8x60; 1 x TX 10x80; 1 x TX 15x80; 1 x TX 20x100; 1 x TX 25x100; 1 x TX 30x115
Code
05028059003 1367 TORX® HF 1 x TX 10x80; 1 x TX 15x80; 1 x TX 20x100; 1 x TX 25x100; 1 x TX 30x115; 1 x TX 40x130
53
334/368/6 Screwdriver set + rack
Application: Slotted, Phillips and square-head screwsContent: 6-piece set and rack in display carton
367/7 TORX® HF Kraftform Plus screwdriver set with holding function and rack
Application: TORX®
Content: 7-piece set and rack in display carton
367/6 TORX® HF Kraftform Plus screwdriver set with holding function
Application: TORX®
Content: 6-piece set
367/6 TORX® HF Kraftform Plus screwdriver set with holding function and rack
Application: TORX®
Content: 6-piece set and rack in display carton
Screwdrivers
?
Code
05028074002 1 367 TORX HF L 1 x TX 20x300; 1 x TX 25x300; 1 x TX 27x300; 1 x TX 30x300
Code
05028062004 1 367 TORX® 1 x TX 10x80; 1 x TX 15x80; 1 x TX 20x100; 1 x TX 25x100; 1 x TX 30x115; 1 x TX 40x130
Code
05345220001 1 367 TORX® 1 x TX 10x80; 1 x TX 15x80; 1 x TX 20x100; 1 x TX 25x100; 1 x TX 30x115
54
In tight assembly or disassembly situations, for example in engine compartments, it is not possible to securely hold the screw with the hand on the screwdriver, and the screw subsequently often gets lost. Lengthy searches or the loss of the screw (with
the associated danger that could bring about) are the consequence. The TORX® HF tools developed by Wera are ideal because they feature an optimised geometry of the original TORX® profi le. The wedging forces resulting from the surface pressure between the drive tip and the screw profi le mean that the screw is securely held on the tool!
What is the purpose of the TORX® HF profi le?
367/4 TORX® HF Kraftform Plus screwdriver set with holding function and 300 mm-long blades
Application: TORX® with holding function, extra long (300 mm) blade Content: 4-piece set
367/6 Screwdriver set Kraftform Plus TORX® and rack
Application: TORX®
Content: 6-piece set and rack in display carton
367/5 Screwdriver set Kraftform Plus TORX®
Application: TORX®
Content: 5-piece set
Kraftform Plus – Series 300 The right tool for every application
Code
05138250004 1 367 TORX® BO 1 x TX 10x80; 1 x TX 15x80; 1 x TX 20x100; 1 x TX 25x100; 1 x TX 30x115; 1 x TX 40x130
Code
05345223001 1 367 TORX PLUS®
1 x 8 IPx60; 1 x 10 IPx80; 1 x 15 IPx80; 1 x 20 IPx100; 1 x 25 IPx100; 1 x 30 IPx115; 1 x 40 IPx130
TORX®
Code
05345222001 1 367 TORX PLUS®
1 x 6 IPx60; 1 x 7 IPx60; 1 x 8 IPx60; 1 x 9 IPx60; 1 x 10 IPx80; 1 x 15 IPx80
55
367/6 TORX® BO Kraftform Plus TORX® screwdriver set and rack
Application: TORX® screws with safety pin (BO = with bore hole) Content: 6-piece set and rack in display carton
367/7 IP Screwdriver set Kraftform Plus TORX PLUS®
Application: TORX PLUS®
Content: 7-piece set
Compared with the "normal" TORX® profi le, the elliptical instead of circular profi le enlarges the 6 fl anks that transfer torque between the tool and the screw. This means that the force applied when screwdriving is spread across a larger surface area. Higher torque is transferred and, in addition, the service life of the screw and tool are lengthened. The so-called centre-lock screws on cutting tools represent a typical use of this type of screw profi le. The thermal infl uences on such holders for carbide insert tips often "bake" the retaining screws so fi rmly that it is important to have a profi le that considerably enhances the loosening torque capability of the screws. For this reason a torque-stable screw profi le is necessary to avoid any possible damage to the screw and to exclude the possibility of an otherwise costly machine downtime.
TORX PLUS®
367/6 IP Screwdriver set Kraftform Plus TORX PLUS®
Application: TORX PLUS®
Content: 6-piece set
Screwdrivers
?
Code
05029510002 1 395 HO 1 x 5.0x70; 1 x 5.5x70; 1 x 6.0x70; 1 x 7.0x80; 1 x 8.0x80; 1 x 10.0x80; 1 x 13.0x80
Code
05345230001 1 395 HO Inch 1 x 3/16"x70; 1 x 1/4"x70; 1 x 5/16"x80; 1 x 11/32"x80; 1 x 3/8"x80; 1 x 7/16"x80; 1 x 1/2"x80
Code
05029508002 1 395 HO Inch 1 x 3/16"x70; 1 x 1/4"x70; 1 x 5/16"x80; 1 x 3/8"x80; 1 x 7/16"x80; 1 x 1/2"x80
56
A screwdriver with a hollow shaft is needed whenever there are screwdriving jobs involving threaded rods i.e. the threaded rod through the nut can slip into the hollow shaft of the screwdriver.
What is the purpose of a screwdriver with hollow shaft?
Kraftform Plus – Series 300 The right tool for every application
395 HO/7 SM Nutdriver set
Application: Hexagon headed bolts, screws and nuts Content: 7-piece set in display carton TIP: The hollow shaft enables seized screws or those on long
threads to be tightened and loosened
395 HO/7 SZ Nutdriver Set
Application: Hexagon headed bolts, screws and nuts Content: 7-piece set TIP: The hollow shaft enables seized screws or those on long
threads to be tightened and loosened
395 HO/6 SZ Nutdriver Set
Application: Hexagon headed bolts, screws and nuts Content: 6-piece set TIP: The hollow shaft enables seized screws or those on long
threads to be tightened and loosened
Code
05051010003 1 160 i VDE 1 x 0.4x2.5x80 1); 1 x 0.6x3.5x100
247 1 x 0.5x3.0x70
334 1 x 1.2x6.5x150
335 1 x 0.8x4.0x100; 1 x 1.0x5.5x125
350 PH 1 x PH 1x80; 1 x PH 2x100
355 PZ 1 x PZ 1x80; 1 x PZ 2x100
932 A 1 x 1.0x5.5x100; 1 x 1.2x7.0x125
Rack 2 x 190.0x50,0
Code
05347105001 1 160 i VDE 1 x 0.4x2.5x80 1); 1 x 0.6x3.5x100
247 1 x 0.5x3.0x70
334 1 x 1.2x6.5x150
335 1 x 0.8x4.0x100; 1 x 1.0x5.5x125
350 PH 1 x PH 1x80; 1 x PH 2x100
368 1 x # 1x80; 1 x # 2x100
932 A 1 x 1.0x5.5x100; 1 x 1.2x7.0x125
Rack 2 x 190.0x50,0
Code
05030005002 10
57
Kraftform XXL
12-piece screwdriver set for all-round applications
1) without Lasertip
Kraftform XXL 2
12-piece screwdriver set for all-round applications
1) without Lasertip
With original Kraftform handle
Bottle opener
Screwdrivers
The multi-component Kraftform handle for quick and low-exertion working.
The screw symbol and tip size identifi cation markings on the handle make it easier to fi nd the right screwdriver in the tool case, or at the workplace.
The hexagonal non-roll feature prevents any annoying rolling away.
The bit material used for manufacturing is subjected to a specifi c Wera hardening process, and this ensures longer product service life.
The Wera Black Point tip and a refi ned hardening process ensure long service life of the tip, improved corrosion protection and an exact fi t.
Kraftform Comfort
The Kraftform Comfort series off ers a wide and diverse range of screwdrivers for universal use, with the distinctive Kraftform handle.
58
Kraftform Classic also off ers the distinctive Kraftform handle in a single-component variant.
The ergonomic Kraftform handle prevents injury to the hand-arm system.
The hexagonal non-roll feature prevents any annoying rolling away at the workplace.
The Wera Black Point tip and a refi ned hardening process ensure long service life of the tip, improved corrosion protection and an exact fi t.
The bit material used for manufacturing is subjected to a specifi c Wera hardening process and this ensures longer product service life.
Kraftform Classic
Screwdrivers
59
Code mm mm mm mm mm
05031400002 0.4 2.0 60 81 2.5 5/64
" 2 3/8" 10
05031401002 0.4 2.5 75 81 2.5 3/32
" 3" 10
05031402002 0.5 3.0 80 81 3.0 1/8" 3 1/
8" 10
05031403002 0.5 3.0 150 81 3.0 1/8" 6" 10
05031404002 0.5 3.0 200 81 3.0 1/8" 8" 5
05031405002 0.6 3.5 100 81 3.5 9/64
" 4" 10
05031406002 0.6 3.5 125 81 3.5 9/64
" 5" 10
05031407002 0.6 3.5 200 81 3.5 9/64
" 8" 5
05031408002 0.8 4.0 100 98 4.0 5/32
" 4" 10
05031409002 0.8 4.0 150 98 4.0 5/32
" 6" 10
05031410002 0.8 4.0 200 98 4.0 5/32
" 8" 5
05031411002 0.8 4.0 300 98 4.0 5/32
" 12" 2
05345283001 0.8 4.5 100 98 4.5 5/32
" 4" 10
05031412002 1.0 5.5 125 98 5.5 7/32
" 5" 10
05031413002 1.0 5.5 150 98 5.5 7/32
" 6" 10
05031414002 1.0 5.5 200 98 5.5 7/32
" 8" 5
05031415002 1.0 5.5 300 98 5.5 7/32
" 12" 2
05031416002 1.2 6.0 100 105 6.0 15/64
" 4" 10
Code mm mm mm mm
05031420002 0.8 5.0 100 98 3/16
" 4" 10
05031421002 1.0 6.0 125 105 15/64
" 5" 10
05031422002 1.2 6.5 150 105 1/4" 6" 10
05031423002 1.2 6.5 200 105 1/4" 8" 5
05031424002 1.2 7.0 150 105 9/32
" 6" 10
05031425002 1.2 8.0 175 112 5/16
" 7" 5
05031426002 1.6 8.0 175 112 5/16
" 7" 5
05031427002 1.6 10.0 200 112 3/8" 8" 5
Code mm mm mm mm mm mm
05031430002 0.6 3.5 4 - 75 81 9/64
" 3" 10
05031431002 0.8 4.0 4 - 90 81 5/32
" 3 1/2" 10
05031432002 0.8 4.5 5 8 90 98 0.178" 3 1/2" 10
05031433002 1.0 5.5 6 10 100 98 7/32
" 4" 10
05031434002 1.2 6.5 6 10 125 105 1/4" 5" 10
05031435002 1.2 7.0 6 10 125 105 9/32
" 5" 10
05031436002 1.6 9.0 8 13 150 112 11/32
" 6" 10
05031437002 1.6 10.0 8 13 175 112 3/8" 7" 5
Code mm mm mm
05031440002 PH 0 60 81 3.0 2 3/8" 5
05031441002 PH 1 80 98 4.5 3 1/8" 10
05031442002 PH 1 200 98 4.5 8" 2
05031443002 PH 1 300 98 4.5 12" 2
05031444002 PH 2 100 105 6.0 4" 10
05031445002 PH 2 200 105 6.0 8" 2
05031446002 PH 2 300 105 6.0 12" 2
05031447002 PH 3 150 112 8.0 6" 5
05031448002 PH 4 200 112 10.0 8" 2
Kraftform ComfortConvenient, safe, good!
1335 Screwdriver for slotted screws
Application: Slotted screwsBlade: RoundDesign: Chrome-plated, Black PointHandle: Kraftform Comfort with non-roll feature, multi-component
1334 Screwdriver for slotted screws
Application: Slotted screwsBlade: RoundDesign: Chrome-plated, Black PointHandle: Kraftform Comfort with non-roll feature, multi-component
1334 SK Screwdriver for slotted screws
Application: Slotted screwsBlade: Hexagonal with bolster from 0.8 x 4.5Design: Chrome-plated, Black PointHandle: Kraftform Comfort with non-roll feature, multi-component
1350 PH Screwdriver for Phillips screws
Application: Phillips screwsBlade: RoundDesign: Chrome-plated, Black PointHandle: Kraftform Comfort with non-roll feature, multi-component
60
Code mm mm mm mm
05031450002 PH 0 4 60 81 2 3/8" 5
05031451002 PH 1 5 8 80 98 2 3/8" 10
05031452002 PH 2 6 10 100 105 4" 10
05031453002 PH 3 8 13 150 112 4" 5
Code mm mm mm
05031500002 TX 5 60 81 3.5 2 3/8" 10
05031501002 TX 6 60 81 3.5 2 3/8" 10
05031502002 TX 7 60 81 3.5 2 3/8" 10
05031503002 TX 8 60 81 3.5 2 3/8" 10
05031504002 TX 9 60 81 4.0 2 3/8" 10
05031505002 TX 10 80 81 4.0 3 1/8" 10
05031506002 TX 15 80 98 4.0 3 1/8" 10
05031507002 TX 20 100 98 4.5 4" 10
05031508002 TX 25 100 105 5.0 4" 10
05031509002 TX 27 115 105 5.5 4 9/16
" 10
05031510002 TX 30 115 105 6.0 4 9/16
" 10
05031511002 TX 40 130 112 7.0 5 3/16
" 10
05031512002 TX 45 130 112 8.0 5 1/8" 10
Code mm mm mm
05031520002 TX 7 60 81 3.5 2 3/8" 5
05031521002 TX 8 60 81 3.5 2 3/8" 5
05031522002 TX 9 60 81 4.0 2 3/8" 5
05031523002 TX 10 80 81 4.0 3 1/8" 5
05031524002 TX 15 80 98 4.0 3 1/8" 5
05031525002 TX 20 100 98 4.5 4" 5
05031526002 TX 25 100 105 5.0 4" 5
05031527002 TX 27 115 105 5.5 4 9/16
" 5
05031528002 TX 30 115 105 6.0 4 9/16
" 5
05031529002 TX 40 130 112 7.0 5 1/8" 5
1350 SK PH Screwdriver for Phillips screws
Application: Phillips screws Blade: Hexagonal, sizes 1 - 3 with bolster Design: Chrome-plated, Black Point Handle: Kraftform Comfort with non-roll feature, multi-component
1367 TORX® screwdriver for TORX® screws
Application: TORX® socket screws Blade: Round Design: Chrome-plated, Black Point Handle: Kraftform Comfort with non-roll feature, multi-component
1367 TORX® BO screwdriver for tamper-proof TORX® screws
Application: TORX® socket screws with safety pin (BO = with bore hole) Blade: Round Design: Chrome-plated, Black Point Handle: Kraftform Comfort with non-roll feature, multi-component
TORX® tools with a borehole prevent the unauthorised unfastening of safety screws. The screws contain a pin that protrudes into the drive profi le so that "normal" TORX® tools cannot be used. This pin fi ts into the borehole of TORX® BO tools allowing safety
screws to be unfastened.
TORX® with borehole
Screwdrivers
61
Code
05031551002 1 1334 1 x 1.2x6.5x150
1335 1 x 0.5x3.0x80; 1 x 0.8x4.0x100; 1 x 1.0x5.5x125
1350 PH 1 x PH 1x80; 1 x PH 2x100
Code
05031556002 1 1334 SK 1 x 0.6x3.5x75; 1 x 0.8x4.0x90; 1 x 1.0x5.5x100; 1 x 1.2x6.5x125
1350 SK PH 1 x PH 1x80; 1 x PH 2x100
Code
05345246001 1 1334 SK 1 x 1.2x6.5x125; 1 x 1.6x9.0x150
1335 1 x 0.8x4.0x100; 1 x 0.8x4.0x150; 1 x 0.8x4.5x100
1350 PH 1 x PH 1x80; 1 x PH 2x100
Code
05345249001 1 1334 1 x 1.2x6.5x150
1335 1 x 0.5x3.0x80; 1 x 0.8x4.0x100; 1 x 1.0x5.5x125
1350 PH 1 x PH 1x80; 1 x PH 2x100
1334/6 Screwdriver set Kraftform Comfort
Application: Slotted and Phillips screws Content: 6-piece set in display carton
Kraftform Comfort Convenient, safe, good!
1334 SK/6 Screwdriver set Kraftform Comfort
Application: Slotted and Phillips screws Content: 6-piece set in display carton
1334/1335/1350/7 Screwdriver set Kraftform Comfort
Application: Slotted and Phillips screws Content: 7-piece set
1335/1350/6 Screwdriver set Kraftform Comfort
Application: Slotted and Phillips screws Content: 6-piece set
Hexagon
62
Code
05345248001 11334 1 x 1.2x6.5x150
1335 1 x 0.5x3.0x80; 1 x 0.8x4.0x100
1350 PH 1 x PH 1x80; 1 x PH 2x100
Code
05031554002 11367 TORX® 1 x TX 10x80; 1 x TX 15x80; 1 x TX 20x100; 1 x TX 25x100; 1 x TX 30x115; 1 x TX 40x130
Code
05345256001 11367 TORX® 1 x TX 6x60; 1 x TX 7x60; 1 x TX 8x60; 1 x TX 9x60; 1 x TX 10x80; 1 x TX 15x80; 1 x TX 20x100; 1 x TX 25x100; 1 x TX 27x115; 1 x TX 30x115; 1 x TX 40x130
Code
05345255001 11367 TORX® 1 x TX 6x60; 1 x TX 8x60; 1 x TX 10x80; 1 x TX 15x80; 1 x TX 20x100; 1 x TX 25x100; 1 x TX 27x115; 1 x TX 30x115
1335/1350/5 Screwdriver set Kraftform Comfort
Application: Slotted and Phillips screwsContent: 5-piece set
1367/6 TORX® screwdriver set Kraftform Comfort
Application: TORX® screwsContent: 6-piece set in display carton
1367/11 TORX® screwdriver set Kraftform Comfort
Application: TORX® screwsContent: 11-piece set
1367/8 TORX® screwdriver set Kraftform Comfort
Application: TORX® screwsContent: 8-piece set
Screwdrivers
63
Code
05345254001 1 1367 TORX® 1 x TX 6x60; 1 x TX 7x60; 1 x TX 8x60; 1 x TX 9x60; 1 x TX 10x80; 1 x TX 15x80
Code
05345257001 1 1367 TORX® 1 x TX 8x60; 1 x TX 10x80; 1 x TX 15x80; 1 x TX 20x100; 1 x TX 25x100
Code
05345258001 1 1367 TORX® BO 1 x TX 7x60; 1 x TX 8x60; 1 x TX 9x60; 1 x TX 10x80; 1 x TX 15x80; 1 x TX 20x100; 1 x TX 25x100
1367/6 TORX® screwdriver set Kraftform Comfort
Application: TORX® screws Content: 6-piece set
Kraftform Comfort Convenient, safe, good!
1367/5 TORX® screwdriver set Kraftform Comfort
Application: TORX® screws Content: 5-piece set
1367/7 TORX® BO screwdriver set Kraftform Comfort for tamper-proof TORX® screws
Application: TORX® screws with safety pin (BO = with bore hole) Content: 7-piece set
TORX® drive profi les transfer torquebetween tool and screw by line orsurface contact rather than pointcontact as many other profi les. Thisprotects both the screw and the toolprofi le. It also increases the amountof torque and power that can
be transferred.
TORX®
64
Code mm mm mm mm mm
05031209003 0.4 2.5 75 81 2.5 3/32
" 3" 10
05031210003 0.5 3.0 80 81 3.0 9/64
" 3 1/8" 10
05031211003 0.8 4.0 100 98 4.0 5/32
" 4" 10
05031212003 1.0 5.5 125 98 5.5 7/32
" 5" 10
Code mm mm mm mm mm
05031200003 1.2 6.5 150 105 6.0 1/4" 6" 10
05031201003 1.2 8.0 175 112 7.0 5/16
" 7" 5
05031202003 1.6 10.0 200 112 9.0 3/8" 8" 5
Code mm mm mm
05031219003 PH 0 60 81 3.0 2 3/8" 5
05031220003 PH 1 80 98 4.5 3 1/8" 10
05031221003 PH 2 100 105 6.0 4" 10
05031222003 PH 3 150 112 8.0 6" 5
Kraftform ClassicProven quality over many years!
1735 Screwdriver for slotted screws
Application: Slotted screwsBlade: RoundDesign: Chrome-plated, Black PointHandle: Kraftform Classic with non-roll feature, single-component
1734 Screwdriver for slotted screws
Application: For slotted screwsBlade: RoundDesign: Chrome-plated, Black PointHandle: Kraftform Classic with non-roll feature, single-component
1750 PH Screwdriver for Phillips screws
Application: Phillips screwsBlade: RoundDesign: Chrome-plated, Black PointHandle: Kraftform Classic with non-roll feature, single-component
Screwdrivers
65
Code
05031280002 1 1734 1 x 1.2x6.5x150
1735 1 x 0.5x3.0x80; 1 x 0.8x4.0x100; 1 x 1.0x5.5x125
1750 PH 1 x PH 1x80; 1 x PH 2x100
Code mm mm mm
05031300002 TX 8 60 81 3.5 2 3/8" 10
05031301002 TX 9 60 81 4.0 2 3/8" 10
05031302002 TX 10 80 81 4.0 3 1/8" 10
05031303002 TX 15 80 98 4.0 3 1/8" 10
05031304002 TX 20 100 98 4.5 4" 10
05031305002 TX 25 100 105 5.0 4" 10
05031308002 TX 27 115 105 5.5 4 9/16
" 10
05031306002 TX 30 115 105 6.0 4 9/16
" 10
05031307002 TX 40 130 112 7.0 5 1/8" 10
1734/6 Screwdriver set Kraftform Classic
Application: Slotted and Phillips screws Content: 6-piece set in display carton
Kraftform Classic Proven quality over many years!
1767 Screwdriver for TORX® screws
Application: TORX® socket screws Blade: Round Design: Chrome-plated, Black Point Handle: Kraftform Classic with non-roll feature, single-component
The hexagonal non-roll featureprevents any annoying rollingaway at the workplace.
Non-roll feature
The Wera Black Point tip and a refi ned hardening process ensure long service life of the tip, improved corrosion protection and an exact fi t.
Black Point Tip
66
Code
05345240001 1 1767 TORX® 1 x TX 6x50; 1 x TX 8x60; 1 x TX 10x80; 1 x TX 15x80; 1 x TX 20x100; 1 x TX 25x100; 1 x TX 27x115; 1 x TX 30x115
1767/8 TORX® screwdriver set Kraftform Classic
Application: TORX® screws Content: 8-piece set
TORX® drive profi les transfer torquebetween tool and screw by line orsurface contact rather than pointcontact as many other profi les. Thisprotects both the screw and the toolprofi le. It also increases the amountof torque and power that can
be transferred.
TORX®
Screwdrivers
67
Flagdriver and Stubby SeriesThe right tool for every application
1267 A TORX® flagdriver for TORX® screws
Application: TORX® socket screwsBlade: RoundDesign: BlackLaser surfaceHandle: Multi-component
1267 A TORX PLUS® flagdriver for TORX PLUS® screws
Application: TORX PLUS® socket screwsBlade: RoundDesign: BlackLaser surfaceHandle: Multi-component
1267 B TORX® combination flagdriver for TORX® and hexagon socket screws
Application: TORX® and hexagon socket screwsBlade: HexagonDesign: TORX® and hexagon, BlackLaser surfaceHandle: Multi-component
1267 B TORX PLUS® combination flagdriver for TORX PLUS® and hexagon socket screws
Application: TORX PLUS® and hexagon socket screwsBlade: HexagonDesign: TORX PLUS® and hexagon, BlackLaser surfaceHandle: Multi-component
Code mm mm mm
05026350003 TX 6 33 62.0 3.0 1 19/64
" 10
05026351003 TX 7 33 62.0 3.0 1 19/64
" 10
05026352002 TX 8 40 69.0 3.0 1 37/64
" 10
05026353003 TX 9 40 69.0 3.0 1 37/64
" 10
05026354002 TX 10 40 69.0 3.0 1 37/64
" 10
Code mm mm mm
05026360002 6 IP 33 62.0 3.0 1 19/64
" 10
05026361003 7 IP 33 62.0 3.0 1 19/64
" 10
05026362002 8 IP 40 69.0 3.0 1 37/64
" 10
05026363003 9 IP 40 69.0 3.0 1 37/64
" 10
05026364002 10 IP 40 69.0 3.0 1 37/64
" 10
Code mm mm mm
05026370002 TX 9 3.5 42 81.0 1 5/8" 10
05026371002 TX 10 3.5 42 81.0 1 5/8" 10
05026372003 TX 15 3.5 47 86.0 1 27/32
" 10
05026373004 TX 15 4 47 86.0 1 27/32
" 10
05026374002 TX 20 4 47 86.0 1 27/32
" 10
Code mm mm mm
05026380003 9 IP 3.5 42 81.0 1 5/8" 10
05026381002 10 IP 3.5 42 81.0 1 5/8" 10
05026382003 15 IP 3.5 47 86.0 1 27/32
" 10
05026383003 15 IP 4 47 86.0 1 27/32
" 10
05026384002 20 IP 4 47 86.0 1 27/32
" 10
68
336 Stubby/Carburettor screwdriver
Application: Slotted screwsBlade: RoundDesign: Chrome-plated, Black PointHandle: Kraftform with non-roll feature, Weralit II, single-component
Stubby/Carburettor screwdriver
Application: Phillips screwsBlade: RoundDesign: Chrome-plated, Black PointHandle: Kraftform, with non-roll feature, Weralit II, single-component
Code mm mm mm mm mm
05110068002 0.6 3.5 25 54 3.5 9/64
" 1" 5
05110069003 0.8 4.0 25 54 4.0 5/32
" 1" 5
05110070003 1.0 5.5 25 54 5.5 7/32
" 1" 5
05110075003 1.2 6.5 25 54 6.5 1/4" 1" 5
05110078002 1.2 8.0 25 54 8.0 5/16
" 1" 5
Code mm mm mm
05008775003 PH 01 25 54 4.5 1" 5
05008780005 PH 02 25 54 6.0 1" 5
05008782002 PH 03 25 54 6.0 1" 5
69
Screwdrivers
Accessories Indispensable aids for screwdriving jobs
335 MS Slotted screwdriver
Application: Suitable for less demanding screwdriving jobs and for general uses such as e.g. depth of profi le measurements, checking for signs of rusting, removal of dirt
Blade: Round Design: Stainless steel for high corrosion protection Handle: Kraftform with non-roll feature, single-component, cellulose
acetate, equipped with practical clip for attaching e. g. to the breast pocket
Wera Star - Magnetiser / Demagnetiser
1427 Awl
Handle: Weralit II, single-component Blade: Extends through handle
?
Code mm mm mm mm mm
05008004002 0.5 3.0 50 70 3.0 1/8" 2" 5
Code mm
05073403002 48.0 1
Code mm mm
05027405004 105 92 4 3/16
" 5
70
The Wera magnetiser/demagnetiser: simply run the tool down the positive side of the Wera magnetiser/demagnetiser and the tool immediately becomes magnetised and is able to hold the screw securely on the blade. To demagnetise the tool, simply run it down one of the four negative sides.
How to hold any screw securely on the screwdriver
Rack for Kraftform screwdrivers
Rack for Kraftform Micro screwdrivers
Code mm mm
05134001002 190.0 50,0 1
Code mm mm
05134002002 190.0 80 1
Screwdrivers
71
1441 Screw gripper attachment for screwdriver blades, long bits and L-keys with holding function for screws
Application: Attachment with holding function for screws, holds all screw profi les and sizes securely on the tool, suitable for round and hexagon blades with a diameter from 4.5 mm to 6.0 mm
Design: Elastomer
1440/1442 Screw gripper set
Application: Attachment with holding function for screws, holds all screw profi les and sizes securely on the tool, suitable for round and hexagon blades with a diameter from 4.5 mm to 6.0 mm and 6.5 mm to 8.0 mm
Construction: Elastomer
Code mm mm
05073681002 4.5-6.0 41.0 1
Code
05073680002 5 1440 1 x 4.5 - 6.0x41.0
1442 1 x 6.5 - 8.0x41.0
For screw gripper sets see page 44, 45, 101, 351, 353, 355, 360
72
Push the screw gripper onto the tip of the screwdriver until the end of the blade protrudes from the rubber blade holder.
Attach the screw to the tip of the blade and secure it in the screw gripper.
Pull the screw gripper towards the screwdriver handle until the two arms of the gripper sit against the head of the screw and are spread slightly apart. The Wera screw gripper releases the screw automatically after it has been fastened.
The two gripper arms spread further apart as they are pushed against thesurface and automatically snap back when the head of the screw is countersunk.
When fastening screws in blind holes the screw gripper is pushed back, making it possible to reach even deep-seated screws.
And this is how the gripper works:
Accessories Indispensable aids for screwdrivers.
Screwdrivers
73
Kraftform Micro Series
74
The highly precise Wera manufacturing quality is indispensable whenever minimum dimensions are concerned. The three-zone concept reduces fastening time and distinctly lowers the cost for each screw connection.
Ever lost patience with precision screw connections?Kraftform Micro is the ideal screwdriving partner for electronics or precision engineering applications.
75
The spinning cap and the fast-turning zone just below the head allowrapid twisting. This makes time-consuming grip adjustments, as required with other conventional precision screwdrivers, unnecessary.
The power zone has integrated soft zones near the blade tip to ensure high torque transfer for loosening or tightening screws without losing contact with the screw.
The precision zone directly above the blade gives the user a better feel for the right rotation angle during fi ne adjustment work.
The Wera Black Point tip, as well as a refi ned hardening process, ensure long service life and enhanced corrosion protection.
Multi-component screwdriver handle for ergonomic working.
Indispensable for many users, including electronics technicians, opticians, precision engineers, jewellers, EDP hardware fi tters and model-makers.
Screwdrivers
???????????????????
Code mm mm mm mm mm
05117990002 0.16 0.8 40 97 2.0 1/32
" 1 9/16
" 10
05117991002 0.18 1.0 40 97 2.0 0.04" 1 9/16
" 10
05117992002 0.20 1.2 40 97 2.0 0.05" 1 9/16
" 10
05118002003 0.23 1.5 40 97 2.0 1/16
" 1 9/16
" 10
05118003002 0.23 1.5 60 97 2.0 1/16
" 2 3/8" 10
05118000002 0.25 1.2 40 97 2.0 0.05" 1 9/16
" 10
05118001002 0.25 1.2 60 97 2.0 0.05" 2 3/8" 10
05117993002 0.30 1.8 40 97 2.0 0.07" 1 9/16
" 10
05118004002 0.30 1.8 60 97 2.0 0.07" 2 3/8" 10
05118017002 0.30 2.0 50 97 2.0 0.07" 2" 10
05118005002 0.40 2.0 40 97 2.5 5/64
" 1 9/16
" 10
05345287001 0.40 2.0 50 97 2.5 5/64
" 2" 10
05118006004 0.40 2.0 60 97 2.5 5/64
" 2 3/8" 10
05118007002 0.40 2.0 100 97 2.5 5/64
" 4" 10
05117994002 0.40 2.5 50 97 2.5 3/32
" 2" 10
05118008004 0.40 2.5 80 97 2.5 3/32
" 3 1/8" 10
05118009002 0.40 2.5 100 97 2.5 3/32
" 4" 10
05117995002 0.50 3.0 50 97 3.0 1/8" 2" 10
05118010003 0.50 3.0 80 97 3.0 1/8" 3 1/
8" 10
05118011002 0.50 3.0 100 97 3.0 1/8" 4" 10
05117996002 0.50 3.0 150 97 4.0 1/8" 6" 10
05118012004 0.60 3.5 80 97 4.0 9/64
" 3 1/8" 10
05118014004 0.80 4.0 80 97 4.0 5/32
" 3 1/8" 10
05118015002 0.80 4.0 100 97 4.0 5/32
" 4" 10
05118016002 0.80 4.0 150 97 4.0 5/32
" 6" 10
Code mm mm mm
05118019002 PH 00 40 97 2.5 1 9/16
" 10
05118020004 PH 00 60 97 3.0 2 3/8" 10
05118022004 PH 0 60 97 3.0 2 3/8" 10
05118023002 PH 1 60 97 4.0 2 3/8" 10
05118024004 PH 1 80 97 4.0 3 1/8" 10
05118025002 PH 1 100 97 4.0 4" 10
Code mm mm mm
05118030003 PZ 0 60 97 3.0 2 3/8" 10
05118032003 PZ 1 80 97 4.0 3 1/16
" 10
76
The electronic TORX® HF screwdriver with holding function literally presses the screw onto the screwdriver. The conical driving fl anks that taper toward the tip of the tool, the optimised fl ank base and the ideal engage depth hold the screw securely on the blade.
How can I hold my TORX® screw securely on the screwdriver?
Series Kraftform Micro The superior screwdriver for electronics technicians
2035 Screwdriver for slotted screws for electronic applications
Application: Slotted screws Blade: Round Design: Chrome-plated, Black Point Handle: Kraftform Micro with non-roll feature and rotating cap, multi-
component
2050 PH Screwdriver for Phillips screws for electronic applications
Application: Phillips screws Blade: Round Design: Chrome-plated, Black Point Handle: Kraftform Micro with non-roll feature and rotating cap, multi-
component
2055 PZ Screwdriver for Pozidriv screws for electronic applications
Application: Suitable for Pozidriv*) screws Blade: Round Design: Chrome-plated, Black Point Handle: Kraftform Micro with non-roll feature and rotating cap, multi-
component
*) Pozidriv = reg. trademark of Phillips Screw Company.
???????????????????
Code mm mm mm
05118180002 TX 4 40 97 2.5 1 9/16
" 5
05118181002 TX 5 40 97 3.0 1 9/16
" 5
05118182002 TX 6 40 97 3.0 1 9/16
" 5
05118183002 TX 7 60 97 3.0 2 3/8" 5
05118184002 TX 8 60 97 3.0 2 3/8" 5
05118185002 TX 9 60 97 4.0 2 3/8" 5
05118186002 TX 10 60 97 4.0 2 3/8" 5
05118187002 TX 15 60 97 4.0 2 3/8" 5
05118188002 TX 20 60 97 4.0 2 3/8" 5
Code mm mm mm
05118035002 TX 1 40 97 2.0 1 9/16
" 5
05118036002 TX 2 40 97 2.0 1 9/16
" 5
05118037002 TX 3 40 97 2.0 1 9/16
" 5
05118039002 TX 4 40 97 2.5 1 9/16
" 5
05118040003 TX 5 40 97 3.0 1 9/16
" 5
05118042003 TX 6 40 97 3.0 1 9/16
" 5
Code mm mm mm
05118044003 TX 7 60 97 3.0 1 9/16
" 5
05118046003 TX 8 60 97 3.0 2 3/8" 5
05118048003 TX 9 60 97 4.0 2 3/8" 5
05118050003 TX 10 60 97 4.0 2 3/8" 5
05118052003 TX 15 60 97 4.0 2 3/8" 5
05118054003 TX 20 60 97 4.0 2 3/8" 5
77
The Kraftform Micro, with its three zones and their specifi c arrangement, satisfi es these requirements perfectly. The free-turning cap that provides support for the hand works with these advantages, enabling quick and easy precision work.
How to perform precision screwdriving jobs quickly whilst still applying the required degree of force
2067 TORX® HF Screwdriver for TORX® screws for electronic applications with holding function
Application: TORX® socket screws Blade: Round Design: Holding function for TORX® screws made according to Acument
Global Technologies Inc. specifi cations, chrome-plated, Black Point
Handle: Kraftform Micro with non-roll feature and rotating cap, multi-component
2067 TORX® Screwdriver for TORX® screws for electronic applications
Application: TORX® socket screws Blade: Round Design: Chrome-plated, Black Point Handle: Kraftform Micro with non-roll feature and rotating cap, multi-
component
2067 TORX® BO Screwdriver for tamper-proof TORX® screws for electronic applications
Application: TORX® socket screws with safety pin (BO = with bore hole) Blade: Round Design: Bore hole in TORX® section, chrome-plated, Black Point Handle: Kraftform Micro with non-roll feature and rotating cap, multi-
component
Screwdrivers
?
Code mm mm mm mm
05118060003 0.7 40 97 3.0 1 9/16
" 5
05118062003 0.9 40 97 3.0 1 9/16
" 5
05118064003 1.3 40 97 3.0 1 9/16
" 5
05118066002 1.5 60 97 3.0 2 3/8" 5
05118068003 2.0 60 97 3.0 2 3/8" 5
05118070003 2.5 60 97 4.0 2 3/8" 5
05118072003 3.0 60 97 4.0 2 3/8" 5
05345284001 0,028" 40 97 3.0 1 9/16
" 5
05345285001 0,035" 40 97 3.0 1 9/16
" 5
05118074002 0.05" 40 97 3.0 1 9/16
" 5
05118076002 1/16
" 60 97 3.0 2 3/8" 5
05118078002 5/64
" 60 97 3.0 2 3/8" 5
05118080002 3/32
" 60 97 4.0 2 3/8" 5
05118082002 7/64
" 60 97 4.0 2 3/8" 5
05118075002 1/8" 60 97 4.0 2 3/
8" 5
Code mm mm mm mm
05118089002 1.3 60 97 3.0 2 3/8" 5
05118090002 1.5 60 97 3.0 2 3/8" 5
05118092002 2.0 60 97 3.0 2 3/8" 5
05118094002 2.5 60 97 4.0 2 3/8" 5
05118096002 3.0 60 97 4.0 2 3/8" 5
05118098002 1/16
" 60 97 3.0 2 3/8" 5
05118100002 5/64
" 60 97 3.0 2 3/8" 5
05118102002 3/32
" 60 97 3.0 2 3/8" 5
05118106002 7/64
" 60 97 4.0 2 3/8" 5
05118103002 1/8" 60 97 4.0 2 3/
8" 5
Code mm mm mm
05118200002 IP 4 40 97 2.5 1 9/16
" 5
05118201002 IP 5 40 97 3.0 1 9/16
" 5
05118202002 IP 6 40 97 3.0 1 9/16
" 5
05118203002 IP 7 60 97 3.0 2 3/8" 5
05118204002 IP 8 60 97 3.0 2 3/8" 5
05118205002 IP 9 60 97 4.0 2 3/8" 5
05118206002 IP 10 60 97 4.0 2 3/8" 5
05118207002 IP 15 60 97 4.0 2 3/8" 5
05118208002 IP 20 60 97 4.0 2 3/8" 5
78
The Wera magnetiser/demagnetiser: simply run the tool down the positive side of the Wera magnetiser/demagnetiser and the tool immediately becomes magnetised and is able to hold the screw securely on the blade. To demagnetise the tool, simply run it down one of the four negative sides. See page 70.
How to hold any screw securely on the screwdriver
Series Kraftform Micro The superior screwdriver for electronics technicians
2054 Screwdriver for hexagon socket screws for electronic applications
Application: Hexagon socket screws Blade: Round Design: Hex-Plus, chrome-plated, Black Point Handle: Kraftform Micro with non-roll feature and rotating cap, multi-
component
2052 Ball end screwdriver for hexagon socket screws for electronic applications
Application: Hexagon socket screws Blade: Round Design: Hexagon ball end, chrome-plated, Black Point Handle: Kraftform Micro with non-roll feature and rotating cap, multi-
component
2067 TORX PLUS® screwdriver for TORX PLUS® screws for electronic applications
Application: TORX PLUS® socket screws Blade: Round Design: Chrome-plated, Black Point Handle: Kraftform Micro with non-roll feature and rotating cap, multi-
component
?
Code mm mm mm mm
05118108002 1.5 60 97 4.0 2 3/8" 5
05118109002 1.8 60 97 4.0 2 3/8" 5
05118110002 2.0 60 97 4.0 2 3/8" 5
05118112002 2.5 60 97 4.0 2 3/8" 5
05118114002 3.0 60 97 5.0 2 3/8" 5
05118116002 3.2 60 97 5.0 2 3/8" 5
05118118002 3.5 60 97 5.3 2 3/8" 5
05118120002 4.0 60 97 5.5 2 3/8" 5
05118122002 4.5 60 97 6.2 2 3/8" 5
05118124002 5.0 60 97 7.0 2 3/8" 5
05118126002 5.5 60 97 7.8 2 3/8" 5
05345281001 6.0 60 97 8.5 2 3/8" 5
05118128002 3/32
" 60 97 5.7 2 3/8" 5
05118130002 7/64
" 60 97 5.7 2 3/8" 5
05118132002 1/8" 60 97 5.7 2 3/
8" 5
05118134002 9/64
" 60 97 5.7 2 3/8" 5
05118136002 5/32
" 60 97 5.7 2 3/8" 5
05118135002 3/16
" 60 97 - 2 3/8" 5
05118137002 7/32
" 60 97 - 2 3/8" 5
05345282001 1/4" 60 97 8.5 2 3/
8" 5
Code
05118150003 1 2035 Micro 1 x 0.30x1.8x60; 1 x 0.40x2.0x60; 1 x 0.40x2.5x80; 1 x 0.50x3.0x80
2050 PH Micro 1 x PH 00x60; 1 x PH 0x60
Code
05118152003 1 2035 Micro 1 x 0.40x2.5x80; 1 x 0.50x3.0x80; 1 x 0.60x3.5x80; 1 x 0.80x4.0x80
2050 PH Micro 1 x PH 0x60; 1 x PH 1x80
79
Every challenging screwdriving job merits a perfect problem solution. Therefore, the extent and depth of the range is aligned to the needs of professional users.
Why is the Micro range so extensive?
2069 Nutdriver for electronic applications
Application: Hexagon headed bolts, screws and nuts Blade: Round Design: Chrome-plated Handle: Kraftform Micro with non-roll feature and rotating cap, multi-
component
2035/6 A Screwdriver set and rack for electronic applications
Application: Slotted and Phillips screws Content: 6-piece set and rack in display carton
2035/6 B Screwdriver set and rack for electronic applications
Application: Slotted and Phillips screws Content: 6-piece set and rack in display carton
Screwdrivers
Code
05345270001 12035 Micro 1 x 0.23x1.5x40; 1 x 0.40x2.0x40; 1 x 0.40x2.5x50; 1 x 0.50x3.0x50; 1 x 0.60x3.5x80; 1 x 0.80x4.0x80
Code
05345272001 12035 Micro 1 x 0.40x2.5x50; 1 x 0.40x2.5x100; 1 x 0.50x3.0x100; 1 x 0.50x3.0x150; 1 x 0.80x4.0x100; 1 x 0.80x4.0x150
2050 PH Micro 1 x PH 0x60
Code
05345271001 12035 Micro 1 x 0.23x1.5x40; 1 x 0.30x2.0x50; 1 x 0.40x2.5x50; 1 x 0.50x3.0x50
2050 PH Micro 1 x PH 00x60; 1 x PH 0x60; 1 x PH 1x60
80
Series Kraftform MicroThe superior screwdriver for electronics technicians
2035/6 Screwdriver set for electronic applications
Application: Slotted screwsContent: 6-piece set
2035/2050 PH 0/7 Screwdriver set for electronic applications
Application: Slotted and Phillips screwsContent: 7-piece set
2035/2050 PH 00 - 01/7 Screwdriver set for electronic applications
Application: Slotted and Phillips screwsContent: 7-piece set
Code
05345276001 1 2067 TORX® HF 1 x TX 5x40; 1 x TX 6x40; 1 x TX 7x60; 1 x TX 8x60; 1 x TX 9x60; 1 x TX 10x60; 1 x TX 15x60
Code
05345277001 1 2067 TORX® HF 1 x TX 6x40; 1 x TX 7x60; 1 x TX 8x60; 1 x TX 9x60; 1 x TX 10x60; 1 x TX 15x60
???????????????????
81
2067/7 HF TORX® screwdriver set with holding function for electronic applications
Application: TORX® socket screws Content: 7-piece set
2067/6 TORX® HF TORX® screwdriver set with holding function for electronic applications
Application: TORX® socket screws Content: 6-piece set
The electronic TORX® HF screwdriver with holding function literally presses the screw onto the screwdriver. The conical driving fl anks that taper toward the tip of the tool, the optimised fl ank base and the ideal engage depth hold the screw securely on the blade.
How can I hold my TORX® screw securely on the screwdriver?
Screwdrivers
Code
05345274001 1 2054 Micro 1 x 0,028"x40; 1 x 0,035"x40; 1 x 0.05"x40; 1 x 1/16"x60; 1 x 5/64"x60; 1 x 3/32"x60; 1 x 7/64"x60; 1 x 1/8"x60
Code
05345273001 1 2054 Micro 1 x 0.7x40; 1 x 0.9x40; 1 x 1.3x40; 1 x 1.5x60; 1 x 2.0x60; 1 x 2.5x60; 1 x 3.0x60
Code
05118154003 1 2067 TORX® BO Micro
1 x TX 7x60; 1 x TX 8x60; 1 x TX 9x60; 1 x TX 10x60; 1 x TX 15x60; 1 x TX 20x60
?
82
Series Kraftform Micro The superior screwdriver for electronics technicians
2054/8 Hexagon screwdriver set for electronic applications
Application: Hexagon socket screws Content: 8-piece set
2054/7 Hexagon screwdriver set for electronic applications
Application: Hexagon socket screws Content: 7-piece set
2067/6 TORX® BO screwdriver set and rack for electronic applications
Application: TORX® socket screws with safety pin (BO = with bore hole) Content: 6-piece set and rack in display carton
TORX® tools with a borehole prevent the unauthorised unfastening of safety screws. The screws contain a pin that protrudes into the drive profi le so that "normal" TORX® tools cannot be used. This pin fi ts into the borehole of TORX® BO tools allowing safety screws to be
unfastened.
TORX® with borehole
Code
05118156003 1 2052 Micro 1 x 1.5x60; 1 x 2.0x60; 1 x 2.5x60; 1 x 3.0x60
2054 Micro 1 x 0.9x40; 1 x 1.3x40
Code
05345275001 1 2052 Micro 1 x 1.3x60; 1 x 1.5x60; 1 x 2.0x60; 1 x 2.5x60; 1 x 3.0x60
83
2052/6 Hexagon screwdriver set and rack for electronic applications
Application: Ball end for hexagon socket screws Content: 6-piece set and rack in display carton
2052/5 Hexagon screwdriver set for electronic applications
Application: Ball end for hexagon socket screws Content: 5-piece set
The multi-component Kraftform Micro screwdriver handle is perfect for ergonomic working.The three-zone concept reduces fastening time and distinctlylowers the cost for each screw connection.
Multi-component handle
The Wera Black Point tip, as well as a refi ned hardening process, ensure long service life and enhanced corrosion protection.
Black Point Tip
Screwdrivers
Code
05345278001 12069 Micro 1 x 2.5x60; 1 x 3.0x60; 1 x 3.5x60; 1 x 4.0x60; 1 x 4.5x60; 1 x 5.0x60; 1 x 5.5x60; 1 x 6.0x60
Code
05345279001 12069 Micro 1 x 3/32"x60; 1 x 7/64"x60; 1 x 1/8"x60; 1 x 9/64"x60; 1 x 5/32"x60; 1 x 3/16"x60; 1 x 7/32"x60; 1 x 1/4"x60
Code
05118158003 12069 Micro 1 x 2.0x60; 1 x 2.5x60; 1 x 3.0x60; 1 x 3.5x60; 1 x 4.0x60; 1 x 5.0x60
84
2069/8 2,5mm - 6,0mm Nutdriver set for electronic applications
Application: Hexagon headed bolts, screws and nutsContent: 8-piece set
2069/8 3/32" - ¼" Nutdriver set for electronic applications
Application: Hexagon headed bolts, screws and nutsContent: 8-piece set
2069/6 Screwdriver set and rack for electronic applications
Application: Hexagon headed bolts, screws and nutsContent: 6-piece set and rack in display carton
Series Kraftform MicroThe superior screwdriver for electronics technicians
85
Series 400 T-Handle Screwdrivers
86
The ergonomic design of the T-handle fi lls the palm of the hand. The fi ngers rest in the soft, rounded recess, and the whole hand is in contact with the handle - so there is no friction loss between the hand and handle.
The ergonomic design of the handle enables high torque to be applied for loosening or tightening jobs.
The blades are made out of special alloy steels for superior wear resistance and robustness.
Hex-Plus provides more contact surface inside the screw head. This reduces the notching eff ect to a minimum, and more or less eliminates the risk of rounding out the screw head.
The T-handle series is needed whenever particularly high torque for loosening or tightening jobs needs to be applied. Especially high force can be transferred by using the blade as an extension of the lower arm. The power is transferred positively, i.e. there is no frictional loss between the hand and the handle.
Ever needed more leverage?
Code mm mm mm
05013300002 2 100 27 61 4" 5
05013301002 2 200 27 61 8" 5
05013302004 2.5 100 27 61 4" 5
05013303002 2.5 200 27 61 8" 5
05013304002 3 100 33 70 4" 5
05013305002 3 150 33 70 6" 5
05013330002 3 200 33 70 8" 5
05013331002 3 350 33 70 14" 5
05013332003 4 100 33 70 4" 5
05013306002 4 150 33 70 6" 5
05013307002 4 200 33 70 8" 5
05013333002 4 350 33 70 14" 5
05013334002 5 100 44 87 4" 5
05013308002 5 150 44 87 6" 5
05013309002 5 200 44 87 8" 5
05013335002 5 350 44 87 18" 5
05013336002 5 450 44 87 14" 5
05013337002 6 100 44 87 4" 5
05013338002 6 150 44 87 6" 5
05013310002 6 200 44 87 8" 5
05013339002 6 350 44 87 14" 5
05013311002 7 200 44 87 8" 5
05013340002 8 100 44 87 4" 5
05013341002 8 150 44 87 6" 5
05013312002 8 200 44 87 8" 5
05013313002 8 350 44 87 14" 5
05013342002 10 100 44 87 4" 5
05013314002 10 200 44 87 8" 5
87
Hex-Plus tools for hexagon socket screws provide more contact surface inside the screw profi le. This reduces the notching effect to a minimum and protects the head of the screw.
Series 400 T-Handle Ideal for high torque
454 T-handle hexdriver
Application: Hexagon socket screws Blade: Hexagon Design: Hex-Plus, chamfered, chrome-plated Handle: T-handle, Weralit II, single-component
Screwdrivers
Code mm mm mm
05344536002 3/32
" 100 27 61 4" 5
05344537002 7/64
" 100 27 61 4" 5
05344538002 1/8" 100 33 70 4" 5
05344546002 9/64
" 150 33 70 6" 5
05344545002 5/32
" 150 33 70 6" 5
05344544002 3/16
" 150 44 87 6" 5
05344543002 7/32
" 150 44 87 6" 5
05344542002 1/4" 200 44 87 8" 5
05344541002 5/16
" 200 44 87 8" 5
05344540002 3/8" 200 44 87 8" 5
Code mm mm mm mm
05013350002 TX 6 100 27 61 4" 3.0 5
05013352002 TX 7 100 27 61 4" 3.0 5
05013354002 TX 8 100 27 61 4" 3.5 5
05013356002 TX 9 100 27 61 4" 3.5 5
05013358002 TX 10 100 27 61 4" 4.0 5
05013360002 TX 15 100 33 70 4" 4.0 5
05013362002 TX 20 100 33 70 4" 4.5 5
05013364003 TX 20 200 33 70 8" 4.5 5
05013366002 TX 25 100 33 70 4" 5.0 5
05013368003 TX 25 200 33 70 8" 5.0 5
05013370003 TX 27 200 44 87 8" 6.0 5
05013372003 TX 30 200 44 87 8" 6.0 5
05013374003 TX 40 200 44 87 8" 8.0 5
05013376003 TX 45 200 44 87 8" 9.0 5
Code mm mm mm
05013250002 1/4" 115 44 87 4 9/
16" 5
05013252004 1/4" 230 44 87 9" 5
88
Series 400 T-HandlePerfect for high torque
454 T-handle hexdriver, imperial
Application: Hexagon socket screwsBlade: HexagonDesign: Hex-Plus, chamfered, chrome-platedHandle: T-handle, Weralit II, single-component
467 T-handle TORX® driver
Application: TORX® screwsBlade: RoundDesign: Chrome-plated, Black PointHandle: T-handle, Weralit II, single-component
410 T-handle ¼" square drive socket adaptor
Application: 1/4" drive socketsBlade: RoundDesign: 1/4" square drive, chrome-platedHandle: T-handle, Weralit II, single-component
Code mm mm mm
05013390002 1/4" 45 44 87 1 25/
32" 2
Code
05345235001 1 467 TORX® 1 x TX 9x100; 1 x TX 10x100; 1 x TX 15x100; 1 x TX 20x100; 1 x TX 25x100; 1 x TX 27x200;
1 x TX 30x200
89
Rapid-in and self-lockThe bit can be pushed into the adaptor without moving the sleeve. The lock is activated automatically as soon as the bit is applied to the screw. Bits are held securely and wobble-free.
Rapid-outSimply push the sleeve forward to change the bit. The spring mechanism lifts the bit off the magnet and unlocks the tool. The bit can be easily removed. The rapid-out function makes it easy to
remove even the smallest bits without extra tools.
Chuck-allThe Rapidaptor quick-release chucks hold ¼" DIN 3126-C 6.3 and E 6.3 as well as Wera series 1 and 4 bits.
Single-hand functionEvery function of the Rapidator quick-release chuck, such as inserting or releasing bits, can be carried out with one hand. This is faster, more economical and more ergonomic. There are no
unnecessary manoeuvres.
Rapidaptor 489 R T-handle Rapidaptor
Application: Suitable for 1/4" DIN 3126-C 6.3 and E 6.3 (ISO 1173) hexagon insert bits und Wera Series 1 and 4
Drive: 1/4" hexagon with Rapidaptor rapid-in, rapid-out, rapid-spin, chuck-all and single-hand technology, magnetic
Handle: T-handle, multi-component
467/7 Screwdriver set T-handle TORX® driver
Application: TORX® screws Content: 7-piece set
Screwdrivers
90
91
VDE Insulated Safety Tools
Kraftform Plus Series 100 94
Kraftform Kompakt VDE 102
Kraftform Comfort VDE 108
Kraftform Classic VDE 112
VDE Tools
92
The individual testing in a water bath at 10,000 volts, in accordance with DIN EN 60900 (IEC 60900:2004), ensures safe working with loads up to 1,000 volts.
Impact strength tested at - 40°C, guaranteeing safety even under extreme conditions.
The outstanding design of the Kraftform handle ensures that it fi ts perfectly into the hand, preventing hand injuries such as blisters and calluses.
The hard materials used for the handle ensure rapid hand repositioning, without any danger of the skin "sticking" to the handle. The softer "anti-slip" zones enable the low-loss transfer of high forces – resulting in less screwdriving eff ort being required.
Ever had an electric shock?
Kraftform Plus screwdrivers enable a higher transfer of force with less eff ort, and relieve the entire hand-arm system – even with intensive use. In addition, the safety issue, always a top priority at Wera, is very much in focus for series 100 VDE screwdrivers. The quality of the blades exceeds current standards with regard to hardness and torque strength. Every tool is tested individually for dielectric strength under a load of 10,000 volts, so as to ensure safe working with loads up to 1,000 volts.
Wera VDE tools provide more safety than required by current regulation.
93
The screw symbol and tip size identifi cation markings on the handle make it easier to fi nd the right screwdriver in the tool case or at the workplace.
The hexagonal non-roll feature prevents any annoying rolling away at the workplace.
Laser treatment burns a micro-rough surface into the tip of the blade with an edge hardness of up to 1,000 Vickers. The drive end literally "bites" into the head of the screw. The advantages: safer working and less slipping.
The screwdriver sets are supplied with a rack that can be attached to the wall. This ensures organised storage and quick & easy access. The rack is also available as an individual item.
VDE Tools
Code mm mm mm mm
05006100006 1) 0.4 2.5 80 81 3/32
" 3 1/8" 10
05006105005 1) 0.5 3.0 100 81 1/8" 4" 10
05006110005 0.6 3.5 100 81 9/64
" 4" 10
05006115006 0.8 4.0 100 98 5/32
" 4" 10
05006116002 0.8 4.0 150 98 5/32
" 6" 5
05006120006 1.0 5.5 125 98 7/32
" 5" 10
05006121002 1.0 5.5 200 98 7/32
" 8" 5
05006125007 1.2 6.5 150 105 1/4" 6" 10
05006126002 1.2 6.5 200 105 1/4" 8" 5
05006130006 1.2 8.0 175 112 5/16
" 7" 5
05006135002 1.6 8.0 200 112 5/16
" 8" 5
05006140003 1.6 10.0 200 112 3/8" 8" 5
Code mm mm mm mm
05006440002 0.6 3.5 100 81 9/64
" 4" 10
05006441002 0.8 4.0 100 98 5/32
" 4" 10
05006442002 1.0 5.5 125 98 7/32
" 5" 10
Code mm mm
05006150006 1) PH 0 80 81 3 1/8" 5
05006152006 PH 1 80 98 3 1/8" 5
05006153002 PH 1 150 98 6" 5
05006154007 PH 2 100 105 4" 5
05006159002 PH 2 200 105 8" 5
05006156005 PH 3 150 112 6" 5
05006158005 1) PH 4 200 112 8" 2
Code mm mm
05006450002 PH 1 80 98 3 1/8" 5
05006451002 PH 2 100 105 4" 5
94
Reduced blade diameter with integrated protective insulation, allows sunken screws and spring elements to be accessed and actuated, individually tested as per IEC 60900 : 2004.
VDE Insulated screwdriver for slotted screws with reduced blade diameter
Kraftform Plus – Series 100 VDE The safety screwdriver when working with live wiring
160 i VDE Insulated screwdriver for slotted screws
Application: Slotted screws Blade: Insulated, individually tested as per IEC 60900 : 2004 Design: Conical tip, Lasertip Handle: Kraftform with non-roll feature, multi-component
1) without Lasertip
160 iS VDE Insulated screwdriver with reduced blade diameter for slotted screws
Application: Slotted screws and actuating tool for spring terminals Blade: Reduced blade diameter with integrated protective insulation,
allows sunken screws and spring elements to be accessed and actuated, individually tested as per IEC 60900 : 2004
Design: Conical blade, zinc-phosphated Handle: Kraftform with non-roll feature, multi-component
162 i PH VDE Insulated screwdriver for Phillips screws
Application: Phillips screws Blade: Insulated, individually tested as per IEC 60900 : 2004 Design: Lasertip Handle: Kraftform with non-roll feature, multi-component
1) without Lasertip
162 iS PH VDE Insulated screwdriver with reduced blade diameter for Phillips screws
Application: Phillips screws Blade: Reduced blade diameter with integrated protective insulation,
allows sunken PH screws to be accessed and actuated, individually tested as per IEC 60900 : 2004
Design: Blade zinc-phosphated Handle: Kraftform with non-roll feature, multi-component
?
?
Code mm mm
05006460002 PZ 1 80 98 3 1/8" 5
05006461002 PZ 2 100 105 4" 5
Code mm mm
05006160005 1) PZ 0 80 81 3 1/8" 5
05006162007 PZ 1 80 98 3 1/8" 5
05006163002 PZ 1 150 98 6" 5
05006164008 PZ 2 100 105 4" 5
05006165002 PZ 2 200 105 8" 5
05006166007 PZ 3 150 112 6" 5
05006168004 1) PZ 4 200 112 8" 2
95
A dielectric strength test under a 10,000 volt load in a water bath is the only way of reassuring users that their screwdrivers have been exhaustively tested for their most important feature: their insulation. Each individual Wera VDE screwdriver is subjected to this
test to guarantee safe working up to 1,000 volts.
How do you know a VDE screwdriver is safe?
It happens time and time again that the tip slips out of the screw head when screwdriving, potentially damaging surfaces, and occasionally even making contact with live components. The tips of the Wera Lasertip screwdrivers are microscopically roughened by means of
a laser. This rough surface literally "bites" itself fi rmly into the screw head – preventing slips. This allows the user to feel secure in their safety, particularly when working on live wires.
How to prevent the screwdriver from slipping out of the screw head
165 iS PZ VDE Insulated screwdriver with reduced blade diameter for Pozidriv screws
Application: Suitable for Pozidriv*) screws Blade: Reduced blade diameter with integrated protective insulation,
allows sunken PZ screws to be accessed and actuated, individually tested as per IEC 60900 : 2004
Design: Blade zinc-phosphated Handle: Kraftform with non-roll feature, multi-component
*) Pozidriv = reg. trademark of Phillips Screw Company.
165 i PZ VDE Insulated screwdriver for Pozidriv screws
Application: Suitable for Pozidriv*) screws Blade: Insulated, individually tested as per IEC 60900 : 2004 Design: Lasertip Handle: Kraftform with non-roll feature, multi-component
1) without Lasertip *) Pozidriv = reg. trademark of Phillips Screw Company.
VDE Tools
Code mm mm
05006455002 # 1 80 98 3 1/8" 5
05006456002 # 2 100 105 4" 5
Code mm mm
05006190002 # 1 80 98 3 1/8" 5
05006191002 # 2 100 105 4" 5
Code mm mm
05006380002 # 1 80 98 3 1/8" 5
05006381002 # 2 100 105 4" 5
96
For the use in terminal blocks, control cabinets, switches, relays, sockets etc.
PlusMinus screwdrivers
162 iS PH/S VDE Insulated screwdriver for PlusMinus screws (Phillips/slotted) with reduced blade diameter
Application: PlusMinus screws (Phillips/slotted) Blade: Reduced blade diameter with integrated protective insulation,
allows sunken PlusMinus screws to be accessed and actuated, individually tested as per IEC 60900 : 2004
Design: Combination profi le Phillips/slotted, blade zinc-phosphated Handle: Kraftform with non-roll feature, multi-component
Kraftform Plus – Series 100 VDE The safety screwdriver when working with live wiring
165 i PZ/S VDE Insulated screwdriver for PlusMinus screws (Pozidriv/slotted)
Application: For PlusMinus screws (Pozidriv*)/slotted) Blade: Insulated, individually tested as per IEC 60900 : 2004 Design: PlusMinus (Pozidriv*)/slotted) Handle: Kraftform with non-roll feature, multi-component
*) Pozidriv = reg. trademark of Phillips Screw Company.
Reduced blade diameter with integrated protective insulation, allows sunken screws and spring elements to be accessed and actuated, individually tested as per IEC 60900 : 2004.
VDE Insulated screwdriver for slotted screws with reduced blade diameter
162 i PH/S VDE Insulated screwdriver for PlusMinus screws (Phillips/slotted)
Application: PlusMinus screws (Phillips/slotted) Blade: Insulated, individually tested as per IEC 60900 : 2004 Design: PlusMinus (Phillips/slotted) Handle: Kraftform with non-roll feature, multi-component
? Code mm mm
05006465002 # 1 80 98 3 1/8" 5
05006466002 # 2 100 105 4" 5
Code mm mm
05006181002 TX 5 80 81 3 1/8" 5
05006182002 TX 6 80 81 3 1/8" 5
05006183002 TX 7 80 81 3 1/8" 5
05006184002 TX 8 80 81 3 1/8" 5
05006169002 TX 9 80 81 3 1/8" 5
05006170003 TX 10 80 81 3 1/8" 5
05006172003 TX 15 80 98 3 1/8" 5
05006174003 TX 20 80 98 3 1/8" 5
05006176003 TX 25 100 105 4" 5
05006177002 TX 27 100 105 4" 5
05006178003 TX 30 100 105 4" 5
05006179002 TX 40 150 112 6" 5
Code mm mm mm
05004650002 2.5 80 98 3 1/8" 5
05004655002 3.0 80 98 3 1/8" 5
05004660002 4.0 80 98 3 1/8" 5
05004665002 5.0 80 105 3 1/8" 5
05004670002 6.0 100 105 4" 5
05004675002 8.0 100 112 4" 5
Code mm mm
05004780003 # 1 80 98 3 1/8" 5
05004783002 # 1 150 98 6" 5
05004781003 # 2 100 105 4" 5
05004784002 # 2 200 105 8" 5
05004782002 # 3 150 112 6" 5
97
All Kraftform Plus screwdrivers are marked with their drive profi le and size. This enables faster and more reliable selection of the correct tool from the tool case.
How to fi nd the correct screwdriver quickly
165 iS PZ/S VDE Insulated screwdriver for PlusMinus screws (Pozidriv/slotted) with reduced blade diameter
Application: For PlusMinus screws (Pozidriv*)/slotted) Blade: Reduced blade diameter with integrated protective insulation,
allows sunken PlusMinus screws to be accessed and actuated, individually tested as per IEC 60900 : 2004
Design: PlusMinus (Pozidriv*)/slotted), blade zinc-phosphated Handle: Kraftform with non-roll feature, multi-component
*) Pozidriv = reg. trademark of Phillips Screw Company.
167 i VDE Insulated TORX® screwdriver
Application: TORX® socket screws Blade: Insulated, individually tested as per IEC 60900 : 2004 Design: Zinc-phosphated Handle: Kraftform with non-roll feature, multi-component
164 i VDE Insulated hexagon screwdriver
Application: Hexagon socket screws Blade: Insulated, individually tested as per IEC 60900 : 2004 Design: Zinc-phosphated Handle: Kraftform with non-roll feature, multi-component
168 i VDE Insulated screwdriver for square socket head screws
Application: Square socket head screws Blade: Insulated, individually tested as per IEC 60900 : 2004 Design: Zinc-phosphated Handle: Kraftform with non-roll feature, multi-component
VDE Tools
?
Code mm mm mm mm
05005300004 5.5 125 98 11.0 5" 5
05005305002 6.0 125 98 12.0 5" 5
05005310003 7.0 125 105 14.0 5" 5
05005315002 8.0 125 105 15.0 5" 5
05005320003 9.0 125 105 16.0 5" 5
05005325002 10.0 125 112 17.0 5" 5
05005330003 11.0 125 112 19.0 5" 5
05005335003 12.0 125 112 20.0 5" 5
05005340003 13.0 125 112 21.0 5" 5
05104900002 3/16
" 125 98 11.0 5" 10
05345280001 7/32
" 125 98 12.0 5" 10
05104905002 1/4" 125 98 13.0 5" 10
05104901003 5/16
" 125 105 15.0 5" 10
05104906003 3/8" 125 105 17.0 5" 10
05104902003 7/16
" 125 112 19.0 5" 10
05104904002 1/2" 125 112 21.0 5" 10
05104903002 9/16
" 125 112 23.0 5" 10
05104907002 5/8" 125 112 25.0 5" 10
Code mm mm mm mm
05005655008 0.5 3.0 70 3.0 1/8" 2 3/
4" 5
Code
05006145006 1 160 i VDE 1 x 0.4x2.5x80 1); 1 x 0.6x3.5x100; 1 x 0.8x4.0x100; 1 x 1.0x5.5x125
162 i PH VDE 1 x PH 1x80; 1 x PH 2x100
98
Wera produces the Kraftform handle out of several materials with diff erent properties. A resistant plastic is used for the core which ensures that the blade is held securely even under high strain. A softer material is used for the coloured soft zones, which
provides high frictional resistance and allows the transfer of high forces – resulting in less required screwdriving eff ort. The red sections with their hard surfaces prevent any "sticking" of the hand to the handle, making rapid repositioning of the hand possible.
Why is the Kraftform Plus handle made out of several components?
190 i VDE Insulated nutdriver
Application: Hexagon headed bolts, screws and nuts Blade: Insulated, individually inspected as per IEC 60900 : 2004 Design: Zinc-phosphated Handle: Kraftform with non-roll feature, multi-component
247 UL Single-pole voltage tester
Application: Voltage testing Standard: ISO 57680/6 and VDE 0680/6 for 80 to 250 V
Kraftform Plus – Series 100 VDE The safety screwdriver when working with live wiring
160 i/6 Rack Screwdriver Set Kraftform Plus Series 100 + Rack
Kraftform: The safety screwdriver. Lasertip blade + rack Application: For slotted and Phillips screws Content: 6-pieces set and rack in display carton
1) without Lasertip
?
Code
05073600002 1 162 i PH/S VDE 1 x # 1x80; 1 x # 2x100
Code
05073601003 1 165 i PZ/S VDE 1 x # 1x80; 1 x # 2x100
99
VDE tools are often used under extreme conditions, such as very low temperatures. Safety must be guaranteed even under these conditions. The plastics used for the handle of Wera VDE screwdrivers are guaranteed to meet the most stringent test requirements for low-temperature impact strength at -40 °C.
Where can I fi nd tools that are resistant to extreme temperatures?
162 i PH/S # 1+2 Screwdriver set
Application: PlusMinus screws (Phillips/slotted) Content: 2-piece set in display pack
165 i PZ/S # 1+2 Screwdriver set
Application: PlusMinus screws (Pozidriv*)/slotted) Content: 2-piece set in display pack
*) Pozidriv = reg. trademark of Phillips Screw Company.
VDE Tools
Code
05347777001 1 160 i VDE 1 x 0.6x3.5x100; 1 x 1.0x5.5x125
162 i PH VDE 1 x PH 1x80; 1 x PH 2x100
168 i VDE 1 x # 1x80; 1 x # 2x100
?
Code
05347900001 1 160 i VDE 1 x 0.4x2.5x80 1); 1 x 0.5x3.0x100 1); 1 x 0.6x3.5x100; 1 x 0.8x4.0x100; 1 x 1.0x5.5x125; 1 x 1.2x6.5x150
162 i PH VDE 1 x PH 0x80 1); 1 x PH 1x80; 1 x PH 2x100; 1 x PH 3x150
168 i VDE 1 x # 1x801) ; 1 x # 2x100 1)
Code
05346279001 1 1440 1 x 4.5 - 6.0x41.0
1442 1 x 6.5 - 8.0x41.0
160 i VDE 1 x 0.8x4.0x100; 1 x 1.0x5.5x125; 1 x 1.2x6.5x150
162 i PH VDE 1 x PH 1x80; 1 x PH 2x100
168 i VDE 1 x # 2x100
247 UL 1 x 0.5x3.0x70
100
160 i/168 i/6 Rack Screwdriver set Kraftform Plus Series 100 + Rack
Kraftform: The safety screwdriver. Lasertip blade + rack Application: For slotted, Phillips and square socket screws Content: 6-pieces set and rack in display carton
Kraftform Plus – Series 100 VDE The safety screwdriver when working with live wiring
All Kraftform screwdrivers have a non-roll feature at the lower end of the handle. The hexagonal design prevents any annoying rolling away of the screwdriver at the workplace.
How to prevent the screwdriver from rolling away
160 i/12 screwdriver set Kraftform Plus Series 100
Kraftform: The safety screwdriver with Lasertip blade Application: Slotted, Phillips and square socket head
screws Content: 12-piece set
1) without Lasertip
160 i/162 i/168 i/7 Rack Screwdriver set Kraftform Plus Series 100 + voltage tester+ rack + screw gripper
Kraftform: The safety screwdriver. Lasertip blade + screw gripper + voltage tester + rack
Application: Slotted, Phillips and square socket head screws, screw gripper with holding function for screws; fi xes all screw profi les and sizes securely to the screw
Content: 9-pieces set and rack in display carton
*) Pozidriv = reg. trademark of Phillips Screw Company.
Code
05073690002 5 1440 1 x 4.5 - 6.0x41.0
1442 1 x 6.5 - 8.0x41.0
162 i PH VDE 1 x PH 1x80; 1 x PH 2x100
Code
05345200001 1 190 i VDE 1 x 7/32"x125; 1 x 1/4"x125; 1 x 5/16"x125; 1 x 3/8"x125; 1 x 1/2"x125
Code
05345201001 1 190 i VDE 1 x 3/16"x125; 1 x 7/32"x125; 1 x 1/4"x125; 1 x 5/16"x125; 1 x 3/8"x125; 1 x 7/16"x125; 1 x 1/2"x125
?
101
162 PH1/2 + 1440/1442 SB Screwdriver set
Application: Attachment with holding function for screws, holds all screw profi les and sizes securely on the tool, suitable for round and hexagon blades with a diameter from 2.5 mm to 4.5 mm and 4.5 mm to 6 mm
Construction: Elastomer
190 i/5 Nutdriver set Kraftform Plus Series
Kraftform: The safety screwdriver Application: Hexagon headed bolts, screws and nuts Content: 5-piece set
190 i/7 Nutdriver set Kraftform Plus Series
Kraftform: The safety screwdriver Application: Hexagon headed bolts, screws and nuts Content: 7-piece set
Our screwdrivers are tested for dielectric strength under a 10,000 volt load in a water bath to make sure that their most important property, their insulation, has been exhaustively tested. Each individual Wera VDE screwdriver is subjected to this test to guarantee safe working up to 1,000 volts.
Where can I fi nd a safe VDE screwdriver?
VDE Tools
102
Kraftform Kompakt VDE
103
The tools can be stored and carried in a robust belt pouch, keeping them always to hand.
The handle/interchangeable blade system allows rapid exchange of the blades required for a wide range of applications.
Each Kraftform Kompakt VDE set has been tested individually in a water bath at 10,000 volts, in accordance with DIN EN 60900 (IEC 60900:2004). This ten-times-higher testing load guarantees safe working at their maximum permitted load of 1,000 volts.
The 18-piece set includes blades for PlusMinus screws, various keys for switch cabinets and a voltage tester.
Kraftform Kompakt VDE sets come with an insulated handle and insulated interchangeable blades, that can be exchanged without any special tools.
Kraftform Kompakt VDE Versatile tools for work on live wiring
VDE Tools
?
Code
05003470003 1 817 VDE 1 x 9x102
KK 60 i 1 x 0.4x2.5x154; 1 x 0.6x3.5x154; 1 x 0.8x4.0x154; 1 x 1.0x5.5x154
KK 62 i 1 x PH 1x154; 1 x PH 2x154
Code
05003473002 1 817 VDE 1 x 9x102
KK 60 i 1 x 0.6x3.5x154; 1 x 1.0x5.5x154
KK 62 i 1 x PH 1x154; 1 x PH 2x154
KK VDE 68 i 1 x # 1x154; 1 x # 2x154
Code
05003471008 1 817 VDE 1 x 9x102
247 UL 1 x 0.5x3.0x70
KK 60 i 1 x 0.4x2.5x154; 1 x 0.6x3.5x154; 1 x 0.8x4.0x154; 1 x 1.0x5.5x154
KK 62 i 1 x PH 1x154; 1 x PH 2x154
KK 62 i PH/S 1 x # 1x154; 1 x # 2x154
KK 65 i PZ 1 x PZ 1x154; 1 x PZ 2x154
KK 65 i PZ/S 1 x # 1x154; 1 x # 2x154
KK 96 VK 6,3 1 x 6.3x89
KK 97 VK 8,1 1 x 8.1x89
KK 98 DK 1 x 89
KK 99 FL 1 x 89
104
Kraftform Kompakt VDE sets come with an insulated handle and insulatedinterchangeable blades, that can beexchanged without any special tools.
Kraftform Kompakt VDE sets
Kraftform Kompakt VDE Versatile tools for work on live wiring
Kraftform Kompakt VDE 60 i/7
1 Kraftform hand-held bit holder 817 VDE for Wera interchangeable blades VDE interchangeable blades (each 154 mm long) 7-piece set
Kraftform Kompakt VDE 60 i/68 i/7
1 Kraftform hand-held bit holder 817 VDE for Wera VDE interchangeable blades VDE interchangeable blades (each 154 mm long) 7-piece set
Kraftform Kompakt VDE 60 i/62 i/65 i/18
1 Kraftform hand-held bit holder 817 VDE for Wera VDE interchangeable blades VDE interchangeable blades (each 154 mm long) Single-pole voltage tester 18-piece set
Code
05347163003 1817 VDE 1 x 9x102
247 UL 1 x 0.5x3.0x70
KK 60 i 1 x 0.4x2.5x154; 1 x 0.6x3.5x154; 1 x 0.8x4.0x154; 1 x 1.0x5.5x154
KK 62 i 1 x PH 1x154; 1 x PH 2x154
KK 62 i PH/S 1 x # 1x154; 1 x # 2x154
KK 65 i PZ/S 1 x # 1x154; 1 x # 2x154
KK 68 i 1 x # 1x154; 1 x # 2x154
KK 96 VK 6,3 1 x 6.3x89
KK 97 VK 8,1 1 x 8.1x89
KK 98 DK 1 x 89
KK 99 FL 1 x 89
Code mm mm
05003990002 9 102 1
Code mm mm mm
05003400002 0.4 2.5 154 3/32
" 6 1/16
" 5
05003401002 0.5 3.0 154 1/8" 6 1/
16" 5
05003402002 0.6 3.5 154 9/64
" 6 1/16
" 5
05003403002 0.8 4.0 154 5/32
" 6 1/16
" 5
05003404002 1.0 5.5 154 7/32
" 6 1/16
" 5
05003405002 1.2 6.5 154 1/4" 6 1/
16" 5
Code mm
05003410002 PH 0 154 6 1/16
" 5
05003411002 PH 1 154 6 1/16
" 5
05003412002 PH 2 154 6 1/16
" 5
Code mm
05003450002 PZ 0 154 6 1/16
" 5
05003451002 PZ 1 154 6 1/16
" 5
05003452002 PZ 2 154 6 1/16
" 5
105
Kraftform Kompakt VDE 60 i/62 i/68 i/18
1 Kraftform handle 817 VDE for Wera VDE interchangeable bladesVDE interchangeable blades (154 mm long)18-piece set
817 VDE Kraftform blade holder
Application: Wera interchangeable VDE bladesHandle: Kraftform with non-roll feature, multi-component
Kraftform Kompakt VDE 60 i
Application: Slotted screwsBlade: Insulated, individually tested as per IEC 60900 : 2004Drive: 9 mm hexagonal with entry chamferDesign: Conical blade, zinc-phosphated, Black Point
Kraftform Kompakt VDE 62 i
Application: Phillips screwsBlade: Insulated, individually tested as per IEC 60900 : 2004Drive: 9 mm hexagonal with entry chamferDesign: Zinc-phosphated, Black Point
Kraftform Kompakt VDE 65 i
Application: Pozidriv*) screwsBlade: Insulated, individually tested as per IEC 60900 : 2004Drive: 9 mm hexagonal with entry chamferDesign: Zinc-phosphated, Black Point
*) Pozidriv = reg. trademark of Phillips Screw Company.
VDE Tools
Code mm
05003440002 # 1 154 6 1/16
" 5
05003441002 # 2 154 6 1/16
" 5
Code mm
05003445002 # 1 154 6 1/16
" 5
05003446002 # 2 154 6 1/16
" 5
Code mm
05003415002 # 1 154 6 1/16
" 5
05003416002 # 2 154 6 1/16
" 5
Code mm mm
05003420002 2.5 154 6 1/16
" 5
05003421002 3.0 154 6 1/16
" 5
05003422002 4.0 154 6 1/16
" 5
05003423002 5.0 154 6 1/16
" 5
05003424002 6.0 154 6 1/16
" 5
Code mm
05003430002 TX 9 154 6 1/16
" 5
05003431002 TX 10 154 6 1/16
" 5
05003432002 TX 15 154 6 1/16
" 5
05003433002 TX 20 154 6 1/16
" 5
05003434002 TX 25 154 6 1/16
" 5
05003435002 TX 27 154 6 1/16
" 5
05003436002 TX 30 154 6 1/16
" 5
106
Kraftform Kompakt VDE Versatile tools for work on live wiring
Kraftform Kompakt VDE 62 i PH/S
Application: PlusMinus screws, slotted/Phillips Blade: Insulated, individually tested as per IEC 60900 : 2004 Drive: 9 mm hexagonal with entry chamfer Design: PlusMinus, slotted/Phillips, zinc-phosphated, Black Point
Kraftform Kompakt VDE 65 i PZ/S
Application: PlusMinus screws, slotted/Pozidriv*)
Blade: Insulated, individually tested as per IEC 60900 : 2004 Drive: 9 mm hexagonal with entry chamfer Design: PlusMinus, slotted/Pozidriv, zinc-phosphated, Black Point
*) Pozidriv = reg. trademark of Phillips Screw Company.
Kraftform Kompakt VDE 68 i
Application: Square socket head screws Blade: Insulated, individually tested as per IEC 60900 : 2004 Drive: 9 mm hexagonal with entry chamfer Design: Zinc-phosphated, Black Point
Kraftform Kompakt VDE 64 i
Application: Hexagon socket screws Blade: Insulated, individually tested as per IEC 60900 : 2004 Drive: 9 mm hexagonal with entry chamfer Design: Zinc-phosphated, Black Point
Kraftform Kompakt VDE 67 i TORX®
Application: TORX® socket screws Blade: Insulated, individually tested as per IEC 60900 : 2004 Drive: 9 mm hexagonal with entry chamfer Design: Zinc-phosphated, Black Point
Code mm mm
05003460002 6.3 89 3 9/16
" 5
Code mm mm
05003461002 8.1 89 3 9/16
" 5
Code mm
05003462002 89 3 9/16
" 5
Code mm
05003463002 89 3 9/16
" 5
6 mm
8 mm
8 mm
14 mm
107
The 18-piece set includes blades for PlusMinus screws, various keys for switch cabinets and a voltage tester.
Kraftform Kompakt switch cabinet keys
Kraftform Kompakt 96 VK 6,3
Switch cabinet key, 6.3 mm
Kraftform Kompakt 97 VK 8,1
Switch cabinet key, 8.1 mm
Kraftform Kompakt 98 DK
Switch cabinet key
Kraftform Kompakt 99 FL
Switch cabinet key
VDE Tools
108
The Kraftform Comfort VDE series off ers a wide and diverse range of screwdrivers for universal use, with the distinctive Kraftform handle.
Kraftform Classic VDE also off ers the distinctive Kraftform handle, in a single-component variant.
Multi-component Kraftform handle, for quick and low-exertion working.
Screw symbol and tip size identifi cation markings on the Comfort handle make it easier to fi nd the right screwdriver in the tool case or at the workplace.
Hexagonal non-roll feature prevents any annoying rolling away at the workplace.
The bit material used for manufacturing is subjected to a specifi c Wera hardening process, ensuring longer product service life.
VDE tools: The individual testing in a water bath at 10,000 volts, in accordance with DIN EN 60900 (IEC 60900:2004), ensures safe working under a load of up to 1,000 volts.
Wera Black Point tips and a refi ned hardening process ensure long service life of the tip, improved corrosion protection and an exact fi t.
Kraftform Comfort VDE and Classic VDE
Code mm mm mm mm
05031580002 0.4 2.5 80 81 3/32
" 3 1/8" 10
05031581002 0.5 3.0 100 81 1/8" 4" 10
05031582002 0.6 3.5 100 81 9/64
" 4" 10
05031583002 0.8 4.0 100 98 5/32
" 4" 10
05031584002 0.8 4.0 150 98 5/32
" 6" 5
05031587002 1.0 5.5 125 98 7/32
" 5" 10
05031585002 1.0 5.5 200 98 7/32
" 8" 5
05031588002 1.2 6.5 150 105 1/4" 6" 10
05031586002 1.2 6.5 200 105 1/4" 8" 5
05031589002 1.2 8.0 175 112 5/16
" 7" 5
05031590002 1.6 8.0 200 112 5/16
" 8" 5
05031591002 1.6 10.0 200 112 3/8" 8" 5
Code mm mm
05031600002 PH 0 80 81 3 1/8" 5
05031601002 PH 1 80 98 3 1/8" 5
05031602002 PH 1 150 98 6" 5
05031603002 PH 2 100 105 4" 5
05031604002 PH 2 200 105 8" 5
05031605002 PH 3 150 112 6" 5
05031606002 PH 4 200 112 8" 2
Code mm mm
05031610002 PZ 0 80 81 3 1/8" 5
05031611002 PZ 1 80 98 3 1/8" 5
05031612002 PZ 1 150 98 6" 5
05031613002 PZ 2 100 105 4" 5
05031614002 PZ 2 200 105 8" 5
05031615002 PZ 3 150 112 6" 5
?
109
1160 i VDE Insulated screwdriver for slotted screws
Application: Slotted screws Blade: Insulated, individually tested as per IEC 60900 : 2004 Design: Conical tip, chrome-plated, Black Point Handle: Kraftform Comfort with non-roll feature, multi-component
1162 i PH VDE Insulated screwdriver for Phillips screws
Application: Phillips screws Blade: Insulated, individually tested as per IEC 60900 : 2004 Design: Chrome-plated, Black Point Handle: Kraftform Comfort with non-roll feature, multi-component
1165 i PZ VDE Insulated screwdriver for Pozidriv screws
Application: Suitable for Pozidriv*) screws Blade: Insulated, individually tested as per IEC 60900 : 2004 Design: Chrome-plated, Black Point Handle: Kraftform Comfort with non-roll feature, multi-component
*) Pozidriv = reg. trademark of Phillips Screw Company.
A dielectric strength test under a 10,000-volt load in a water bath is the only way of reassuring users that their screwdrivers have been exhaustively tested for their most important feature: their insulation. Each individual Wera VDE screwdriver is subjected to this
test to guarantee safe working up to 1,000 volts.
How do you know a VDE screwdriver is safe?
VDE Tools
Code
05345211001 1 1160 i VDE 1 x 0.4x2.5x80; 1 x 0.5x3.0x100; 1 x 0.6x3.5x100; 1 x 0.8x4.0x100; 1 x 0.8x4.0x150; 1 x 1.0x5.5x125; 1 x 1.2x6.5x150; 1 x 1.2x8.0x175; 1 x 1.6x10.0x200
1162 i PH VDE 1 x PH 0x80; 1 x PH 1x80; 1 x PH 2x100; 1 x PH 3x150
Code
05031575002 1 1160 i VDE 1 x 0.4x2.5x80; 1 x 0.6x3.5x100; 1 x 0.8x4.0x100; 1 x 1.0x5.5x125
1162 i PH VDE 1 x PH 1x80; 1 x PH 2x100
4115 1 x 0.5x3.0x65
??
110
Kraftform Comfort VDE
1160i/1162i/13 Safety screwdriver set Kraftform Comfort VDE
Application: Slotted and Phillips screws Content: 13-piece set
1160 i/7 Safety screwdriver set Kraftform Comfort VDE and voltage tester
Application: Slotted and Phillips screws Content: 7-piece set in display carton
Screwdriving by hand can actually be quite painful, particularly during extended use. Wera developed the Kraftform handle with this in mind. Its design fi ts exactly to the hand, and this ergonomic handle, which perfectly fi ts the hand, and the
materials used combine to prevent blisters, calluses and strain. This is particularly noticeable when changing the position of grip. This makes the concept of ergonomics "graspable".
How to avoid bruising and injuries to the hands
All Kraftform screwdrivers have a non-roll feature at the lower end of the handle. The hexagonal design prevents any annoying rolling away of the screwdriver at the workplace.
How to prevent the screwdriver from rolling away
Code
05345210001 11160 i VDE 1 x 0.4x2.5x80; 1 x 0.5x3.0x100; 1 x 0.6x3.5x100; 1 x 0.8x4.0x100; 1 x 1.0x5.5x125; 1 x 1.2x6.5x150
1162 i PH VDE 1 x PH 0x80; 1 x PH 1x80; 1 x PH 2x100; 1 x PH 3x150
Code
05345213001 11160 i VDE 1 x 0.6x3.5x100; 1 x 1.0x5.5x125; 1 x 1.2x6.5x150
1162 i PH VDE 1 x PH 1x80; 1 x PH 2x100; 1 x PH 3x150
Code
05345212001 11160 i VDE 1 x 0.8x4.0x100; 1 x 1.2x6.5x150
1162 i PH VDE 1 x PH 1x80; 1 x PH 1x150
111
1160i/1162i/10 Safety screwdriver set Kraftform Comfort VDE
Application: Slotted and Phillips screwsContent: 10-piece set
1160i/1162i/6 Safety screwdriver set Kraftform Comfort VDE
Application: Slotted and Phillips screwsContent: 6-piece set
1160i/1162i/4 Safety screwdriver set Kraftform Comfort VDE
Application: Slotted and Phillips screwsContent: 4-piece set
VDE Tools
?
Code mm mm mm mm
05031240003 0.4 2.5 80 81 3/32
" 3 1/8" 10
05031239002 0.5 3.0 100 81 1/8" 4" 10
05031241003 0.6 3.5 100 81 9/64
" 4" 10
05031242003 0.8 4.0 100 98 5/32
" 4" 10
05031243003 1.0 5.5 125 98 7/32
" 5" 10
05031244003 1.2 6.5 150 105 1/4" 6" 10
05031245002 1.6 8.0 200 112 3/8" 8" 5
Code mm mm
05031249002 PH 0 80 81 3 1/8" 5
05031250003 PH 1 80 98 3 1/8" 10
05031251003 PH 2 100 105 4" 10
05031252002 PH 3 150 112 6" 5
Code
05031282002 1 1760 i VDE 1 x 0.4x2.5x80; 1 x 0.6x3.5x100; 1 x 0.8x4.0x100; 1 x 1.0x5.5x125
1762 i PH VDE 1 x PH 1x80; 1 x PH 2x100
112
Kraftform Classic VDE
Screwdriving by hand can actually be quite painful, particularly during extended use. Wera developed the Kraftform handle with this in mind. Its design fi ts exactly to the hand, and this ergonomic handle, which perfectly fi ts the hand, and the
materials used combine to prevent blisters, calluses and strain. This is particularly noticeable when changing the position of grip. This makes the concept of ergonomics "graspable".
How to avoid bruising and injuries to the hands
Kraftform Classic VDE
1760 i VDE Insulated screwdriver for slotted screws
Application: Slotted screws Blade: Insulated, individually tested as per IEC 60900 : 2004 Design: Conical tip, zinc-phosphated, Black Point Handle: Kraftform Classic with non-roll feature, single-component
1762 i PH VDE Insulated screwdriver for Phillips screws
Application: Phillips screws Blade: Insulated, individually tested as per IEC 60900 : 2004 Design: Zinc-phosphated, Black Point Handle: Kraftform Classic with non-roll feature, single-component
1760 i/6 Screwdriver set Kraftform Classic VDE
Application: Slotted and Phillips screws Content: 6-piece set in display carton
ESD
113
ESD Series
ESD Tools
114
The electric surface resistance of the Wera ESD material is between 106 – 109 ohm. This securely protects components against electrostatic energy and associated damage.
Wera Black Point tips and a refi ned hardening process ensure long service life of the tip, improved corrosion protection and an exact fi t.
How to safely fasten electrostatic-sensitive components?
The use of large-scale integrated circuits – known as ICs – means that electrical appliances are getting smaller and smaller. However, ICs malfunction or fail completely when exposed to electrostatic energy fi elds. This makes ESD-safe screwdrivers indispensable.
ESD
115
The requirements for ESD-safe screwdrivers are specifi ed in the European standard DIN EN 61340-5-1.This standard also includes a handle that has to be out of a defi ned conductive material. The Wera products in the ESD series satisfy these standards and the even more stringent requirements demanded by some technology companies.
The power zone has integrated soft zones near the blade tip to ensure high torque transfer for loosening or tightening screws without losing contact with the screw.
The precision zone directly above the blade gives the user a better feel for the right rotation angle during fi ne adjustment work.
The spinning cap and the fast-turning zone just below the head allow rapid twisting. This makes time-consuming grip adjustments as with other conventional precision screwdrivers unnecessary.
ESD Tools
Code mm mm mm mm mm
05030101002 0.23 1.5 40 97 2.5 1/16
" 1 9/16
" 5
05030100002 0.25 1.2 40 97 2.5 0.05" 1 9/16
" 5
05030102002 0.30 1.8 60 97 2.5 0.07" 2 3/8" 5
05030103002 0.40 2.0 60 97 2.5 5/64
" 2 3/8" 5
05030104002 0.40 2.5 80 97 2.5 3/32
" 3 1/8" 5
05030105002 0.50 3.0 80 97 3.0 1/8" 3 1/
8" 5
05030106002 0.60 3.5 80 97 4.0 9/64
" 3 1/8" 5
05030107002 0.80 4.0 80 97 4.0 5/32
" 3 1/8" 5
Code mm mm mm mm mm
05030046002 1.0 5.5 200 98 5.5 7/32
" 8" 5
05030048002 1.0 6.0 125 98 6.0 15/64
" 5" 5
05030050002 1.2 6.5 150 98 6.0 1/4" 6" 5
05030052002 1.2 7.0 150 112 7.0 9/32
" 6" 5
05030054002 1.2 8.0 175 112 7.0 5/16
" 7" 5
Code mm mm mm
05030110002 PH 00 60 97 2.5 2 3/8" 5
05030111002 PH 0 60 97 3.0 2 3/8" 5
05030112002 PH 1 80 97 4.0 3 1/8" 5
Code mm mm mm
05030064002 PH 1 200 98 4.5 8" 5
05030066002 PH 2 100 98 6.0 4" 5
05030068002 PH 2 200 98 6.0 8" 5
05030070002 PH 3 150 112 8.0 6" 5
Code mm mm mm
05030120002 TX 4 40 97 2.5 1 9/16
" 5
05030121002 TX 5 40 97 3.0 1 9/16
" 5
05030122002 TX 6 40 97 3.0 1 9/16
" 5
116
ESD SeriesESD-safe tools
1578 A Kraftform Micro screwdriver for slotted screws
Application: Slotted screwsBlade: RoundDesign: Chrome-plated, Black PointHandle: Kraftform Micro with non-roll feature and rotating cap, multi-
component
1578 A Screwdriver for slotted screws
Application: Slotted screwsBlade: RoundDesign: Chrome-plated, Black PointHandle: Kraftform with non-roll feature, Weralit ESD
1550 PH Kraftform Micro screwdriver for Phillips screws
Application: Phillips screwsBlade: RoundDesign: Chrome-plated, Black PointHandle: Kraftform Micro with non-roll feature and rotating cap, multi-
component
1550 PH Screwdriver for Phillips screws
Application: Phillips screwsBlade: RoundDesign: Chrome-plated, Black PointHandle: Kraftform with non-roll feature, Weralit ESD
1567 TORX® Kraftform Micro screwdriver for TORX® screws
Application: TORX® socket screwsBlade: RoundDesign: Chrome-plated, Black PointHandle: Kraftform Micro with non-roll feature and rotating cap, multi-
component
Code mm mm mm
05030123002 TX 7 60 97 3.0 2 3/8" 5
05030124002 TX 8 60 97 3.0 2 3/8" 5
05030125002 TX 9 60 97 4.0 2 3/8" 5
05030126002 TX 10 60 97 4.0 2 3/8" 5
Code mm mm mm
05030131002 TX 10 80 81 4.0 3 1/8" 5
05030127002 TX 15 80 98 4.0 3 1/8" 5
05030128002 TX 20 100 98 4.5 4" 5
05030129002 TX 25 100 98 5.0 4" 5
05030130002 TX 30 115 98 6.0 4 9/16
" 5
Code mm mm mm
05030150002 5.0 60 97 7.0 2 3/8" 5
05030151002 5.5 60 97 7.8 2 3/8" 5
Code
05030170002 11550 PH Micro 1 x PH 0x60; 1 x PH 1x80
1578 A Micro 1 x 0.23x1.5x40; 1 x 0.25x1.2x40; 1 x 0.30x1.8x60; 1 x 0.40x2.5x80
ESD
117
1567 TORX® BO Kraftform Micro screwdriver for tamper-proof TORX® screws
Application: TORX® socket screws with safety pin (BO = with bore hole)Blade: RoundDesign: Bore hole in TORX® section, chrome-plated, Black PointHandle: Kraftform Micro with non-roll feature and rotating cap, multi-
component
1567 TORX® BO screwdriver for tamper-proof TORX® screws
Application: TORX® socket screws with safety pin (BO = with bore hole)Blade: RoundDesign: Bore hole in TORX® section, chrome-plated, Black PointHandle: Kraftform with non-roll feature, Weralit ESD
1569 ESD nutdriver
Application: Hexagon headed bolts, screws and nutsBlade: RoundDesign: Chrome-platedHandle: Kraftform Micro with non-roll feature and rotating cap, multi-
component
1578 A/6 Screwdriver set and rack for electronic applications
Application: Slotted and Phillips screwsContent: 6-piece set and rack in display carton
ESD Tools
Code mm mm mm
05328458002 6 10 98 2
Code mm mm
05328463002 1/4" 100 112 4" 2
Code mm mm
05051106002 1/4" 10 54 3/
8" 2
Code mm
05051273002 1/4" 90 2
Code mm
05051464003 1/4" 119 2
Code
05056677002 1813 R ESD 1 x 1/4"x90
800/1 TZ 1 x 0.5x4.0x25; 1 x 1.0x5.5x25
851/1 TZ PH 1 x PH 1x25; 1 x PH 2x25
855/1 TZ PZ 1 x PZ 1x25; 1 x PZ 2x25
867/1 TZ TORX® 1 x TX 10x25; 1 x TX 15x25; 1 x TX 20x25
118
ESD SeriesESD-safe tools
80 ESD Vario handle
Application: 6 mm Vario blades and adaptorsHandle: Kraftform with non-roll feature, Weralit ESD, 10 mm bolster
810/1 ESD bitholding screwdriver with retaining ring suitable for all ¼" bits as per DIN 3126-C 6.3
Application: Suitable for 1/4" DIN 3126-C 6.3 (ISO 1173) hexagon insert bits and Wera Series 1
Blade: HexagonDesign: 1/4" hexagon socket with retaining ring, chrome-platedHandle: Kraftform with non-roll feature, Weralit ESD
811/1 ESD bitholding screwdriver
Application: Suitable for 1/4" DIN 3126-C 6.3 (ISO 1173) hexagon socket bits and Wera Series 1
Design: Extra short, 1/4" hexagon insert bits with retaining ringHandle: Kraftform, Weralit ESD
813 R ESD bitholding screwdriver, non-magnetic
Application: Suitable for 1/4" DIN 3126-C and E 6.3 (ISO 1173) hexagon insert bits and Wera Series 1 and 4
Design: 1/4" hexagon socket with Wera quick-release chuck and Rapidaptor rapid-in, rapid-out, rapid-spin, chuck-all and single-hand technology
Handle: Kraftform with non-roll feature, multi-component
816 R ESD bitholding screwdriver, non-magnetic
Application: Suitable for 1/4" DIN 3126-C and E 6.3 (ISO 1173) hexagon insert bits and Wera Series 1 and 4
Design: 1/4" hexagon socket with Wera quick-release chuck and Rapidaptor rapid-in, rapid-out, rapid-spin, chuck-all and single-hand technology
Handle: Kraftform with non-roll feature, multi-component
Kraftform Kompakt 10 ESD
10-piece set1 hand-held bit holder 813 R ESD Kraftform with quick-release chuck Rapidaptor
!
Code
05056678002 1 813 R ESD 1 x 1/4"x90
800/1 Z 1 x 0.5x3.0x25
851/1 TZ PH 1 x PH 1x25
851/1 Z PH 1 x PH 0x25
867/1 TZ TORX® 1 x TX 5x25; 1 x TX 6x25; 1 x TX 7x25; 1 x TX 8x25; 1 x TX 9x25; 1 x TX 10x25
Code Nm Nm mm
05074730002 7440 ESD 1/4" 0.3-1.2 0.05 155 6" 1
05074731002 7441 ESD 1/4" 1.2-3.0 0.10 155 6" 1
Code in. lbs. in. lbs. mm
05074733002 7445 ESD 1/4" 2.5-11.5 0.5 155 6" 1
05074734002 7446 ESD 1/4" 11.0-29.0 1.0 155 6" 1
ESD
119
All Wera torque tools are supplied with a calibration certifi cate. Our workshop offers a full service for all Wera torque tools. Please contact us with any queries regarding our service, recalibration or repairs on +1-905-637-0003.
Full service
Kraftform Kompakt 11 ESD
10-piece set 1 hand-held bit holder 813 R ESD Kraftform with quick-release chuck Rapidaptor
Series 7400 Kraftform ESD adjustable torque screwdrivers with Rapidaptor quick-release chuck
Application: Suitable for 1/4" DIN 3126 C 6.3 and E 6.3 (ISO 1173) hexagon insert bits und Wera Series 1 and 4
Design: Rapidaptor rapid-in, rapid-out, rapid-spin, chuck-all and single-hand technology, non-magnetic
Accuracy: ±6 % (EN ISO 6789) Handle: Kraftform with non-roll feature, multi-component
Series 7400 Kraftform ESD adjustable torque screwdrivers with Rapidaptor quick-release chuck
Application: Suitable for 1/4" DIN 3126 C 6.3 and E 6.3 (ISO 1173) hexagon insert bits und Wera Series 1 and 4
Design: Rapidaptor rapid-in, rapid-out, rapid-spin, chuck-all and single-hand technology, non-magnetic
Accuracy: ±6 % (EN ISO 6789) Handle: Kraftform with non-roll feature, multi-component
ESD Tools
top related