wireline sub-surface safety system - botil oil tools india …botilindia.com/sub-surface safety...

WIRELINE SUB-SURFACE SAFETY SYSTEM__________________________________________________

BOTIL MODEL ‘BHE’ WIRELINE –RETRIEVABLE SURFACECONTROLLED SUB-SURFACESAFETY VALVEProduct No. BI 806 - 22

The Botil Model ‘BHE’ Wire line –retrievable surface controlled subsurfacesafety valve is a flapper type selfequalizing safety valve, and is availablein 5,000 to 10,000 psi working pressurevariants. The safety valve is equippedwith BRQ lock, which provides positivelocation while installation. The BRQ lockis also suitable for high pressureapplication.

Features: API Q1 and API 14A quality

system ensure design andmanufacturing integrity.

The number of pressureseals/potential leak paths isminimized.

The number of connection isminimized.

The non-elastomeric seal on theO.D of Lock Mandrel and SafetyValve can withstand hightemperature and pressure. Theseals are also resistive toabrasion.

The flapper has primary metal tometal seal mountedeccentrically whichprovides large bore.

SPECIFICATIONS GUIDEParameters Design Specifications

Size 4-1/2”12.6ppf or 5”x 3.813”

5-1/2”x

4.313”

5-1/2”x

4.562”

7” x5.963”

Lock No-GoO.D

3.937” 4.410” 4.687” 6.100

Safety ValveO.D

3.802” 4.300” 4.552” 5.953”

Fish neck I.D 3.125” 3.875” 4.000” 5.375”Min.Bore 2.380” 2.500” 2.850” 3.750”Over alllength

80” 80” 83” 87”

WorkingPressure

5000 - 10000 Psi

Fail-SafeSettingDepth

1000 ft

OpeningPressure atzero HydroStaticPressure

1000 Psi 1200Psi

1000 Psi

Control linepressure tohold SSSVopen afterinitial open

1000 Psi + Flowing Pressure

Closingpressure atzero HydroStaticPressure

300~400 Psi

100

WIRELINE SUB-SURFACE SAFETY SYSTEM____________________________________________________

SUB-SURFACE SAFETY VALVE

101

WIRELINE SUB-SURFACE SAFETY SYSTEM____________________________________________________

BOTIL DUMMYVALVE/SEPARATIONSLEEVEPROD. No. BI 806-24

Dummy valve/Separation Sleeve haveapplication of separating control linefrom tubing string when installed inlanding nipple instead of SSSV, to avoidpressure leakage thru ported nipple.

An Otis Type XN RN, Landing Nippleprofile is featured in the Dummyvalve/Separation Sleeve and polishedpack-off area to install blanking plug toplug production tubing.

SPECIFICATION GUIDE

SEPERATION SLEEVE

Size 4-1/2”12.6ppf ,or

5” x3.813”

5-1/2”x

4.313”

5-1/2”x

4.562”

7” x5.963”

Profile XN XN XN RNSealBore

1.875 2.313 2.750 3.688

102

WIRELINE SUB-SURFACE SAFETY SYSTEM____________________________________________________

BOTIL SAFETY VALVELANDINGNIPPLEPROD. No. BI 806-23

Safety valve landing nipple is a portednipple having 1/4” NPT control lineconnection. The landing nipple has twosealing bores. The upper bore is largerthan lower bore which facilitates easypassage of lower seal unit of SSSVduring running in. The nipple has BRQTop No Go profile which facilitatespositive location of SSSV in landingnipple.

SPECIFICATION GUIDE

PORTED LANDING NIPPLE

Description SIZES

4-1/2”12.6ppf, or

5” x3.813”

5-1/2”x

4.313”

5-1/2”x

4.562”

7” x5.963”

A( UpperSeal Bore)

3.875” 4.345” 4.600” 6.000”

B(LowerSeal Bore)

3.813” 4.313” 4.562” 5.963”

Max. O.D 5.860” 6.650” 6.650” 8.300”

THD.Connection

4-1/2”12.6#OR 5”NewVam

5-1/2” NewVam

7”NewVam

103

WIRELINE SUB-SURFACE SAFETY SYSTEM_________________________________________________

BOTIL RUNNING TOOLProduct No. BI 811-10

BOTIL Model ‘BRQ’ Running Tool is used torun ‘BRQ’ Lock Mandrel in Top No-GoLanding Nipple.

SPECIFICATION GUIDE

RUNNING TOOL

Description SIZES3.813” 4.313” 4.562” 5.963”

A ( Fishneck)

2.312” 3.125”

Will latch ininternalfishingneck

3.125” 3.875” 4.000” 5.375”

Max. O.D 3.802” 4.250” 4.500” 6.000”

THD.Connection

1.062-10 N

104

WIRELINE SUB-SURFACE SAFETY SYSTEM__________________________________________________

BOTIL RUNNING PRONGPROD. BI 811-92

Running prong is used with running toolto keep flapper of SSSV in openposition while running in.

RUNNING PRONG

BOTIL PULLING PRONGPROD. No.811-93

Pulling prong is used with pulling tool toOpen flapper of SSSV for equalizing ofpressure above and below for easyretrieval.

PULLING PRONG

100

105

WIRELINE SUB-SURFACE SAFETY SYSTEM__________________________________________________

BOTIL FLUTED CASING SUBPRODUCT NO. BI 299-70

The BOTIL Fluted Casing Sub facilitateseasy passage of control line outside thecasing O.D

SPECIFICATION GUIDE:Size I.D O.D LENGTH

4 1/2 4.000 5.670 18”OR16”

Approx..

5 4.408 5.670

7 6.184 8.250

100

106