wt4603 risk assessment-2010

MACHINERISK ASSESSMENT

Name: Group: (circle one)

ID. No.2A

2B

2C

2D

2E

2FCourse:

Materials & Architectural Technology □

Wood Science & Technology □

Lecturer: Mr. Joseph Lyster

TA: Mr. Michael CrehanUniversity of

LimerickSenior

Technicians:

Mrs. Louise Madden

Mr. Joseph Murray

Autumn Semester 2010

Table of Contents

Areas to be addressed:• Introduction

• Nature of Environment Investigated

• Health & Safety Policy (HAS Act 2005/BS4163)

• Machine Provision: Location & Layout (Simple floor plan sketch – identify safe work zones etc…)

• Hazards, Risks & Risk Control Measures

• Risk Assessment Procedure (Cyclical Model)

• Risk Assessment/Risk Magnitude

• Workshop Health and Safety Management – Procedures as displayed

• Safety Signage

• Machine/Power Tool Risk Assessment

– Machine 1

– Machine 2

– Machine 3

– Machine 4

– Machine 5

– Machine 6

– Machine 7

You must apply a proper table of contents here indicating page number etc…

The entire document must be printed in A3 and double sided!Capped at 18 A3 pages Double-Sided

• Introduction• Nature of Environment Investigated• Health & Safety Policy (HAS Act

2005/BS4163)

ON THIS PAGE

• Machine Provision: Location & Layout (Simple floor plan sketch – identify safe work zones etc…)

ON THIS PAGE

• Hazards, Risks & Risk Control MeasuresON THIS PAGE

• Risk Assessment Procedure (Cyclical Model)• Risk Assessment/Risk Magnitude

ON THIS PAGE

• Workshop Health and Safety Management – Procedures as displayed• Safety Signage

ON THIS PAGE

ON THIS PAGE

Example i.e. Machine 1

• Describe purpose/function

• Pictures of machine

– Label parts

• List Hazards

• List Risk Control Measures

ON THIS PAGE

HAZARDS RISK CONTROL MEASURES

Example

RISK ASSESSMENT 1

Location: SR2-047 Date: 24-09-2010 Assessment Carried out by: Mr. Joe Lyster

Assessment of: PILLAR DRILL CE Marking (Machines): Yes □ No □

Page 1 of 1 Assessment Review Date: 24-09-2010

HAZARD RISK MAGNITUDE PERSONS AT RISK EXISTING CONTROLS REQUIRED CONTROLS PERSONS RESPONSIBLE TARGET DATE

1. Entanglement

2. Violent Ejection

3. Piece Spinning

4. Electric Shock Hazards

5. Cuts

6. Inadvertent Starting

7. Space around Machine

8. Tripping/Slipping

9. Pinch Point

10. Falling Table

11. Noise Levels

12. Crushing

Completed Risk Assessment to Appear before Risk Magnitude Matrix

ON THIS PAGE

Max of 6 Risk Magnitudes/Page

No. of Risk Magnitudes Dependent on Machine