y candle holder carousel - prusaprinters€¦ · candle holder carousel view in browser updated 6....

Summary

https://youtu.be/nke7eUzGSEg

I purchased one of the German Christmas Carousel's this year and thoughtI would try and design my own version so I could keep it out all year long.

This design uses 14mm Carousel candles available on Amazon, I triedregular tea lights and they did not give off enough heat to rotate theblades. I couldn't locate any candle liners so I made my own fromaluminum foil and punch tool.

This does of course require live flames, so do not leave unattended whenusing. I have gone through quite a few candles now without any issue, butof course be careful and keep and eye on it.

I originally printed the fan blades from PLA+ but they began to warp fromthe heat, I reprinted them from 3DXTech ASA material and they have beenholding up without issue. ABS may also work for these, but I have not triedthat. The other issue I had with heat was when the candles burned all theway down they would really heat up the foil and on my original designbegan to melt the PLA since it was in direct contact. I added a coppercoupling to elevate the candle and help dissipate the heat and this hasbeen holding up nicely. I can burn the candles completely down withoutissue now.

Assembly instruction can be downloaded below (I couldn't figure out howto attach a PDF) https://www.dropbox.com/s/vyl7kvbt1awqzrj/Assembly%20Instructions.pdf?dl=0

HoytDesign

Candle HolderCarousel

VIEW IN BROWSER

updated 6. 2. 2020 | published 6. 2. 2020

3D M

ODEL

ONLY

I went with a PacMan theme for mine, but kept the design open so you canattach whatever theme you want.

I used the ghosts from andrewisme scaled 65% for the top and 90% for thelower scared ghosthttps://www.thingiverse.com/thing:2840173/files

And Pacman from Zarbuta scaled 90%https://www.thingiverse.com/thing:2833881

The Pellets I modeled up and attached the STL

Household > Home Decor

christmaspyramid christmas pyramid pacman light

holder carousel candle

Category: Interactive Art Print Settings

Printer Brand: Prusa

Printer: I3 MK3S

Rafts: No

Supports: No

Resolution: 0.2

Infill: 20%

Filament: Esun, ProtoPasta, 3DXtech PLA+, PLA and ASA Black, High FiveBlueNotes:

Fan Blades from ASAEverything else PLA should be OK, I used E-Sun Black PLA+ and ProtopastaHigh Five Blue

Post-Printing

See the PDF in the files section

Model Files (.stl, .3mf, .obj, .amf) DOWNLOAD ALL FILES

58.5 KBupdated 29. 1. 2020

232.3 KBupdated 29. 1. 2020

94.4 KBupdated 29. 1. 2020

757.5 KBupdated 29. 1. 2020

1.7 MBupdated 29. 1. 2020

158.9 KBupdated 29. 1. 2020

6.6 MBupdated 29. 1. 2020

6.2 MBupdated 29. 1. 2020

6.5 MBupdated 29. 1. 2020

fan-blade.stl

base.stl

roof.stl

candle-base.stl

fan-spindle.stl

frame.stl

carousel-upper.stl

punch-male.stl

carousel-lower.stl

7.7 MBupdated 29. 1. 2020

6.2 MBupdated 29. 1. 2020

5.5 MBupdated 29. 1. 2020

Find source .stl files on Thingiverse.com

The Author has not uploaded any print files.Try to search in User print files section or generate and upload yourown.

License

This work is licensed under a Creative Commons (4.0 International License)

Attribution

✖ | Sharing without ATTRIBUTION ✔ | Remix Culture allowed ✔ | Commercial Use ✔ | Free Cultural Works ✔ | Meets Open Definition

fan-hub.stl

punch-female.stl

dot.stl