your feelings say b ata industrials · shoes. for bata industrials, the whole story starts with a...
Post on 19-May-2018
217 Views
Preview:
TRANSCRIPT
C ATA L O G U E
Bata Industrials Europe • P.O. Box 10050 • 5680 DB Best • The Netherlands • Telephone: +31 (0)499 - 362 911 • Fax: +31 (0)499 - 362 962E-mail: info@bata.nl • www.bataindustrials.com
S1
S1 P
S2
S3
Safety shoes for professional use with toecaps designed to give protection against impact when tested at an energy level of 200 joules. Antistatic properties, energy absorption of seat region and closed heel
As S1 plus steel mid-sole
As S1 plus water resistance and water absorption of upper material
As S2 plus steel mid-sole and cleated outer sole
EN ISO 20345
SAFETy ShOES
01 Footwear for professional use without steel toecaps. Resistance to oil, antistatic properties, energy absorption of seat region and closed heel
EN ISO 20347
OCCUPATIONAL ShOES
yO U R F E E L I N G S S Ay B ATA I N D U S T R I A L S
F o l l o w y o u r f e e l i n g s a n d a s k t h e B a t a I n d u s t r i a l s d e a l e r f o r a d v i c e .
yo u c a n a l s o c o n t a c t u s d i r e c t l y v i a t h e c o n t a c t d e t a i l s l i s t e d b e l o w .
B.A.S.S. Onze Lieve Vrouwstraat 40 B-2600 Berchem Belgium T: +32(0)3 230 19 75 F: +32(0)3 230 19 78 info@esdproducts.eu www.esdproducts.eu
C O N T E N TC ATA L O G U E
What makes Bata Industrials unique
• Footwear beyond safety 3
• Everything that working feet need 6
• We continue to seek improvements 7
• Special socks complete the picture 8
• Bata goes further beyond where
others stop 9
Every collection its own strengths
• The Natural® 12
• BS2000® 22
• Elegance® 30
• Wallstreet® 31
• Muybridge® 34
• Accessoires 35
• Nevada/Nevada Light 13
• New York/Brighton 15
• Etna/Burgos 17
• Riva 19
• Atlantis/Olympiade 23
• Sydney 25
What makes Bata Industrials unique
• Climate management 4
• Four width system 10
• Tunnelsystem® 20
• Several types antislip soles 28
• Easy Rolling System® 32
FOLD OVER for a size comparison table and an explanation of the pictograms which we use on the product pages. handy in helping to select the right footwear.
Four width system
TriTech Plus®-sole
Steel mid-sole
Extensive size range
ESD
Flame retardant/resistant
Sole heat resistant to 300°C
P I C TO G R A M S
TriTechPlus®
3549
ESD
B E TA I N L Ay S O L E
T h E N AT U R A L® I N L Ay S O L E
Bata Industrials has two types of full inlay soles, for an even better fit and optimum wear comfort.
The Beta inlay sole consists of three layers of special Saran weave textile. This ventilating air cushion insulates against heat and cold and keeps feet dry. There is now an improved pre-formed inlay sole for The Natural® as well as for BS2000® which is now thicker and more comfortable and offers added support. This sole guarantees excellent moisture absorption and thereby a pleasantclimate in the shoe.
Both soles are shock absorbing and can be easily removed and washed.
Bata Industrials has a fitting coloured lace for every model, with the option to giveshoes a personal touch. Every lace is available in two lengths: 90 and 120 cm.One variant contains Sigrafil®, which is flame retardant.
Shoes which give you so much pleasure need to be looked after. Then they will last much longer. These special care products from Bata Industrials feed the leather and keep it supple. They also provide extra protection against water and dirt. There is one variant for nubuck and another one for glossy leather.
Mon
dopo
int
21
7 22
5 23
2 24
0 24
7 25
5 26
2 27
0 27
7 28
5 29
2 30
0 30
7 31
5 32
2
Fren
ch s
izes
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
UK
2
3 4
5 6
6,5
7 8
9 9,
5 10
11
12
13
14
USA
fem
ale
4 5
6 7
7,5
8 9
10
USA
mal
e 2
3 4
5 6
7 7,
5 8
9 10
11
12
13
14
15
SIZ
E C
OM
PA
RIS
ON
TA
BL
E
S I Z E TA B L E T h E N AT U R A L
Width Size
N 247-300
W 232-315
XW 232-315
XXW 255-300
®
HRO
300ºC
A S K B ATA I N D U S T R I A L S F O R A D V I C EThe advisors of Bata Industrials are pleased to help you in making the right choice in relation to your working environment. To ensure that the size is exactly right, we organise special fitting sessions, in which both the length as well as the width of the feet are measured, We solve individual footwear problems with semi-orthopaedic adaptations such as a higher heel and/or sole, a shorter steel toecap or retanned leather using vegetable dye’s for people who are allergic to chrome. Thanks to this exceptional expertise and the four width system of our The Natural® collection, we can provide practically anyone with a perfectly fitting solution from within our programme.
I S O 9 0 0 1
A C C E S S O R I E S B a t a t h i n k s i t r i g h t t h r o u g h d o w n t o t h e v e r y l a s t d e t a i l
G R E E N W I T h S I G R A F I L ®
B L A C K / O L I V E G R E E N
B L A C K / G R E yB L A C K B L A C K / B R O W N
B.A.S.S. Onze Lieve Vrouwstraat 40 B-2600 Berchem Belgium T: +32(0)3 230 19 75 F: +32(0)3 230 19 78 info@esdproducts.eu www.esdproducts.eu
F o ot w e a r b e yo n d s a F e t y
Safety remains very important on the work floor. But today’s workforce demand more from their footwear. They want extreme comfort from shoes that look good but keep them fit and healthy at work at the same time. That is why at Bata Industrials we are fully focused on the wear experience and perceptions of the men and women who wear our shoes. Every day. Their wishes and needs drive our efforts in research, development and design. And drive us beyond the current norms. Further in protection. Further in support. Further in fit and durability. This means that Bata Industrials stands for ‘footwear beyond safety’. Presented to you here in a renewed programme in which safety, health and comfort come together more attractively than ever before. For the most widely varying applications in the most widely varying of jobs and trades.
10366_7166_cat_UK.indd 3 22-05-2007 13:29:29
B.A.S.S. Onze Lieve Vrouwstraat 40 B-2600 Berchem Belgium T: +32(0)3 230 19 75 F: +32(0)3 230 19 78 info@esdproducts.eu www.esdproducts.eu
M o d e L
F O O T W E A R B E Y O N D S A F E T Y
P a u l b i s h o p , s h i p p i n gs a F e t y
H e a Lt H
C o M F o rt
If you are on your feet all day, or do a lot of walking, the pressure on your feet increases all the time. so a bit of extra ventilation is extra important especially if you are also troubled by extra transpiration. not only for the odour, but especially because hot and humid feet can lead to tiredness and are more susceptible to medical complaints such as blisters and other injuries. with all the unpleasant consequences, both for the persons involved as well as the company. Paul bishop found his new batas like a breath of fresh air. Certainly since he started wearing the right socks in them, they keep his feet dry and fresh.
the inseparable duo of bata Industrials
bata Industrials uses excellent breathable materials for its footwear, such as textiles and nubuck for the uppers and the moisture absorbing Bata Cool Comfort® and Bata VentAir® for the lining. the two latter materials consist of different layers which ensure a soft, dry and fresh feel while at the same time transporting moisture to the outside. the full benefits of this climate management really come into play when the socks worn are also suited to the absorption and then expulsion of heat and humidity, so that these can then be transported away by the lining and upper material. Pro-Guards® in particular take care of that; another development by bata Industrials.
b e c a u s e C o o L I n G b r i n g s w e l l - b e i n g
10366_7166_cat_UK.indd 4-5 22-05-2007 13:29:37
B.A.S.S. Onze Lieve Vrouwstraat 40 B-2600 Berchem Belgium T: +32(0)3 230 19 75 F: +32(0)3 230 19 78 info@esdproducts.eu www.esdproducts.eu
p a g e �
An important part of absenteeism and sickness costs are caused directly or indirectly by the wearing of unsuitable footwear on the work floor. That can vary from the wrong type of sole, causing people to lose their footing where it really shouldn’t happen, to the wearing of shoes which do not offer enough support or protection. It is also frequently the case that people at work are simply wearing the wrong size shoe. Foot, ankle and low-back problems which arise from this, in particular, can be simply prevented by choosing the right shoes. For Bata Industrials, the whole story starts with a sublime fit. That is why we have developed special anatomically shaped lasts, which provide enough space around the instep and the front of the foot, so that our different models provide the over-all support and stability which you expect from the better quality safety shoe. In this way, we know how to provide an important basis for increasing pleasure at work and lowering absenteeism.
the user sets the norm for us
All of the footwear from Bata Industrials complies amply with the European safety norms. At least equally important for us, is that they meet the demands of our users. They are so keen to wear our shoes, because they are perfectly finished, fit comfortably and save energy on the work floor. Furthermore, we also accommodate the specific requirements of certain branches of industry or occupational groups. With a number of types of antislip soles and special materials which provide extra protection against sparks from welding, acids or water. In this way we ensure that as many people as possible perform better with footwear from Bata Industrials.
For years, Bata Industrials has immersed itself in the anatomy of
the foot and the motions of the working man or woman. In order to develop the best
possible footwear for them. For this purpose, our R&D
department has its own advanced test and Cad/Cam facilities. In close
co-operation with various universities and other external experts, we are constantly looking for new techniques and materials to make our shoes even lighter, safer and more comfortable. We regularly have the results of our efforts tested by internationally accredited test institutes, for an objective determination of where we stand. For the design of our shoes we also call on the services of leading specialists.
1 TriTech Plus®-sole
2 Tunnelsystem®
3 PU mid-sole
4 TPU toecap
5 Steel toecap
� Foam strip
7 Steel mid-sole with integrated shank
8 Full inlay sole
9 Bata Cool Comfort®-lining
10 Leather upper
11 Padded collar
12 Padded tongue
13 Full bellows tongue
2
5
7
9
8
11
34
12
13
10
6
1
The latest evidence of our aim to constantly improve our safety shoes is the new shank manufactured from high-quality thermoplastic polyurethane (TPU). This smart innovation which combines a stabiliser and shock-absorber ensures better balance, added stability and extra comfort. Additionally, this revamped tour de force based on an anatomical last provides added protection and energy to the mid-foot. The result: better circulation in the feet, less weariness and maximum protection during the heaviest work. These are welcome features during the daily tasks performed on the work floor.
e V e ry t H I n G t h a t w o r k i n g f e e t n e e d
we c o n t i n u e t o s e e k
I M P r o V e M e n t s
wrong footwear often source of high absenteeism costs
statistics make it quite clear: people losing their footing and slipping and stumbling are still the biggest causes of long term absence from work. Poor quality soles, or soles unsuited to the working environment in which they are being worn, are often the root cause. such footwear provides insufficient grip and support, so that fatigue sets in sooner. but the right kind of antislip sole can prevent a great deal of misery. Furthermore, experience has taught us that more than one third of people on the work floor are simply wearing the wrong size shoes. which provides a single simple explanation for many back and other problems such as blisters. bata Industrials give you a valuable tool to control the costs of absenteeism and sickness.
Shank
10366_7166_cat_UK.indd 6-7 22-05-2007 13:29:48
B.A.S.S. Onze Lieve Vrouwstraat 40 B-2600 Berchem Belgium T: +32(0)3 230 19 75 F: +32(0)3 230 19 78 info@esdproducts.eu www.esdproducts.eu
p a g e 8
The special socks from Bata
Industrials are made using the
most advanced knitting machines.
In order to get new developments on to the work floor quickly, Bata Industrials makes use of modern, automated production systems. This enables us to respond flexibly and competitively to the demands of the market place. Furthermore we have a complete network throughout Europe of dedicated and specialised dealers to provide both companies as well as end users with service and advice. But first have a look in this catalogue to see what we have to offer you in terms of innovative products and findings.
Bata Industrials is a specialised division of the world’s largest shoe manufacturer : the Bata
Shoe Organisation. So our footwear incorporates more than
100 years of experience. We combine this with the most advanced
material and techniques and the latest insights into bio-mechanics to continually
push the envelope of our capabilities. With one single overriding goal: to guarantee the
wearers of our shoes optimum safety, health and comfort. This philosophy has won Bata Industrials an outstanding reputation in the
better class of safety footwear.
The high level of finish of Bata
Industrials still demands the
trained eye of the craftsman in
parts of the production process.
The most modern Cad/Cam
technology makes for an
innovative design.
1 size indication on inside of sock
2 Lycra® to prevent slipping down
3 Pre-washed and shrink resistant
4 smooth knit for a better fit
5 Ventilation pattern for air circulation
6 Pro-Guards® fibre keeps feet dry and cool
7 antibacterial fibre amicor® keeps feet
odour free
8 terry cushion sole for extra comfort and
protection
9 esd due to the application of bekinox®
F o ot w e a r b e yo n d s a F e t y
1
2
3
4
5
67
89
Our research is not only limited to shoes. Good socks are equally important in our view. That is why, along with our suppliers, we have developed special yarns and fibres to optimize the wear comfort of our safety shoes. Such as Pro-Guards®, a special, clover-leaf shaped fibre. When these fibres come into contact with each other, hollow tubes are created, which transport the perspiration to the outside of the sock, after which the lining can perform its mositure transporting function. At the same time, the antibacterial Amicor® reduces the transpiration odour. Furthermore, many models of sock have a terry cushion sole which comes up over the toes for extra comfort in shoes with steel toecaps. A large part of our sock range is also ESD as standard due to the application of the metal fibre Bekinox®. Finally, thanks to our advanced knitting machines, we can on request incorporate your company logo in the socks.
s p e c i a l s o c k s
C o M P L e t e t h e p i c t u r e
b a t a g o e s
F u rt H e r b e y o n d w h e r e o t h e r s s t o p
10366_7166_cat_UK.indd 8-9 22-05-2007 13:29:54
B.A.S.S. Onze Lieve Vrouwstraat 40 B-2600 Berchem Belgium T: +32(0)3 230 19 75 F: +32(0)3 230 19 78 info@esdproducts.eu www.esdproducts.eu
F O O T W E A R B E Y O N D S A F E T Y
G l e n n M a r s h , m e t a l i n d u s t r y H e a Lt H
s a F e t y
C o M F o rt
because fit is a flexible concept
the foundation for a good fit is the last. Given that research has shown that feet are getting wider with each generation, from now on bata Industrials will use as standard a last with enough space round the front of the foot and the instep, for greater stability and comfort. we also always ensure a big range of length sizes. In the natural® we even go one step further. Most of the models in this collection are available in no less than four width fittings: N, W, XW and XXW. Furthermore, on request, we measure each of our shoes individually to provide everyone with a perfectly fitting solution.
a large part of the workforce wear shoes of the wrong size, with the most unpleasant consequences. right up to illness and absenteeism. well known pain points are a high arch and wide feet because it is not just the length size that determines the fit. If you have been on the go for the whole day, it is important that your shoes neither pinch nor are too big. It is only when they fit snugly around your feet that they give the required support and all of the properties of the shoe perform their task. that is why Glenn Marsh is so happy that he has discovered the natural®. the XXw width of this collection could have been specially made for him. He no longer has any trouble with sore feet, so that even after a long day he now comes home with a smile on his face.
e v e r y f o o t n e e d s s Pa C e
10366_7166_cat_UK.indd 10-11 22-05-2007 13:30:03
B.A.S.S. Onze Lieve Vrouwstraat 40 B-2600 Berchem Belgium T: +32(0)3 230 19 75 F: +32(0)3 230 19 78 info@esdproducts.eu www.esdproducts.eu
neVadaa smart sock with ventilation channels knitted
in for better circulation and a terry cushion
sole for extra protection and comfort.
the antibacterial fibre amicor® keeps feet free
of odour.
• antibacterial
• Keeps feet dry and cool
• terry cushion sole
size range: 35-38, 39-42, 43-4�, 47-50
uK size range: 3-5, �-8, 9-11, 12-14
Colours: black/grey, brown/beige
Composition: 30% Pro-Guards® (polyester),
30% cotton, 20% polyamide, 15% amicor®
(acrylic), 5% Lycra®
t H e n at u r a L®
t h e p e r f e c t f i t f o r e v e r y f o o t
CROW | S2 Full grain Crazy Horse leather/nappabata Cool Comfort®-liningtritech Plus®-solewidth wMondopoint size range: 255-307uK size range: �.5-12 (including 9.5)
AXUM | S2 OMAHA | S3 Full grain leather/nappabata Cool Comfort®-liningtritech Plus®-soleFour widthsMondopoint size range: 232-315 uK size range: 4-13 (including �.5 and 9.5)
APACHE | S2 MALENKA | S3 Full grain leather/nappa/ tPu toecapbata Cool Comfort®-liningtritech Plus®-solewidths w-Xw (apache)Four widths (Malenka)Mondopoint size range: 232-315uK size range: 4-13 (including �.5 and 9.5)
INCA | S2 PONTO | S3 Full grain leather/nappabata Cool Comfort®-liningtritech Plus®-soleFour widthsMondopoint size range: 232-315 uK size range: 4-13 (including �.5 and 9.5)
KANSA | S3 Full grain Crazy Horse leather/nappa/tPu toecapbata Cool Comfort®-liningtritech Plus®-solewidth wMondopoint size range: 255-307uK size range: �.5-12 (including 9.5)
AZTEC | S2 MAYA | S3 Full grain leather/nappa/ tPu toecapbata Cool Comfort®-liningtritech Plus®-solewidth w (aztec)Four widths (Maya)Mondopoint size range: 232-315 uK size range: 4-13 (including �.5 and 9.5)
p a g e 1 2
C r o w | s 2
TriTechPlus®
a X u M | s 2 o M a H a | s 3
TriTechPlus®
HRO
300ºC
a Pa C H e | s 2 M a L e n K a | s 3
TriTechPlus®
HRO
300ºC
HRO
300ºC
K a n s a | s 3
TriTechPlus®
HRO
300ºC
I n C a | s 2 P o n to | s 3
ESD
TriTechPlus®
a Z t e C | s 2 M aya | s 3
TriTechPlus®
neVada LIGHta “lighter” version of the successful nevada
sock with ventilation channels knitted in for
better circulation. the antibacterial fibre
amicor® keeps feet free of odour.
• antibacterial
• Keeps feet dry and cool
size range: 35-38, 39-42, 43-4�, 47-50
uK size range: 3-5, �-8, 9-11, 12-14
Colours: black/grey
Composition: 45% cotton, 20% Pro-Guards®
(polyester), 20% polyamide, 10% amicor®
(acrylic), 5% Lycra®
ESD
The renewed The Natural® has been developed to be a natural extension of the body. Inspired by nature and available in four widths, this lightweight safety shoe is characterised by its perfect fit for every foot. In spite of these benefits, the quality of the new The Natural® has been improved even further on various fronts.
New insights, obtained from intensive research, has led to this new collection from Bata Industrials. The sole technology applied to The Natural® has been improved even further. The collection includes models with a dual density polyurethane (PU) sole as well as models with a TriTech Plus®-sole. Both soles have a different profile that is tailored to the qualities of the sole materials used in order to create optimal stability and slip resistance. The shoe is formed on an asymmetrical last which follows the foot's natural shape. In addition, The Natural® is equipped with the active breathable and moisture-transporting Bata Cool Comfort®- or a leather lining, a replaceable and moisture-absorbing inlay sole, the shock-absorbing Tunnelsystem® and the energy-saving Easy Rolling System®.
Equipped with the new TPU shank which combines a stabiliser and shock-absorber, The Natural® provides extra support to the mid-foot. Most of the models in the attractive The Natural® line, manufactured using first-class leather and various other high-quality materials, are equipped with a sturdy TPU toecap integrated into the design, which extends the life of the shoes and saves on costs.
HRO
300ºC
HRO
300ºC
10366_7166_cat_UK.indd 12-13 22-05-2007 13:30:20
B.A.S.S. Onze Lieve Vrouwstraat 40 B-2600 Berchem Belgium T: +32(0)3 230 19 75 F: +32(0)3 230 19 78 info@esdproducts.eu www.esdproducts.eu
new yorK a stylish, slightly thinner sock that perfectly
matches the business-like image of our
wallstreet® collection.
• Keeps feet dry and cool
size range: 35-38, 39-42, 43-4�, 47-50
uK size range: 3-5, �-8, 9-11, 12-14
Colours: black, marine
Composition: 45% Pro-Guards® (polyester),
30% polyamide, 24% cotton, 1% Lycra®
brIGHton what is particularly striking is the handstitched
toe that ensures that the wearer does not feel
the seam. this provides this elegant sock with
extra comfort. Particularly suitable for wear
with the shoes in our wallstreet® collection.
• Keeps feet dry and cool
• Hand-stitched toe means no seam
size range: 39-42, 43-4�, 47-50
uK size range: �-8, 9-11, 12-14
Colours: black, marine
Composition: 45% Pro-Guards® (polyester),
30% polyamide, 24% cotton, 1% Lycra®
HURON | S2MODOC | S3Full grain leather/nappanappa/leather liningdual density Pu-soleFour widthsMondopoint size range: 232-315uK size range: 4-13 (including �.5 and 9.5)
PETUN | S3Full grain leather/nappa/ tPu toecapnappa/leather liningdual density Pu-solewidths w-XwMondopoint size range: 232-315uK size range: 4-13 (including �.5 and 9.5)
MANSO | S2 ACOMA | S3 Full grain leather/nappanappa/leather liningtritech Plus®-soleFour widthsMondopoint size range: 232-315uK size range: 4-13 (including �.5 and 9.5)
JANO | S3 Full grain Crazy Horse leather/nappa/tPu toecapbata Cool Comfort®-liningtritech Plus®-solewidth wMondopoint size range: 255-307uK size range: �.5-12 (including 9.5)
DAKOTA | S3Full grain leather/nappa/ tPu toecapnappa/leather liningtritech Plus®-solewidths w-XwMondopoint size range: 232-315uK size range: 4-13 (including �.5 and 9.5)
RUBIO | S3Full grain leather/nappa/ tPu toecapnappa/leather liningdual density Pu-solewidths w-XwMondopoint size range: 232-315uK size range: 4-13 (including �.5 and 9.5)
ZUNI | S3 Full grain pull up leather/nappa/tPu toecap bata Cool Comfort®-liningtritech Plus®-solewidth wMondopoint size range: 255-307uK size range: �.5-12 (including 9.5)
LUMBEE | S3 Full grain pull up leather/nappa/tPu toecapbata Cool Comfort®-liningtritech Plus®-solewidth wMondopoint size range: 255-307uK size range: �.5-12 (including 9.5)
WENRO | S3 Full grain leather/nappa/ tPu toecapnappa/leather liningtritech Plus®-solewidths w-XwMondopoint size range: 232-315uK size range: 4-13 (including �.5 and 9.5)
SANDIA | S3 Full grain leather/nappa/ tPu toecap bata Cool Comfort®-liningtritech Plus®-solewidth wMondopoint size range: 255-307uK size range: �.5-12 (including 9.5)
p a g e 1 4
t H e n at u r a Lt h e p e r f e c t f i t f o r e v e r y f o o t
The dual density polyurethane sole of The Natural® is flexible and lightweight, heat resistant to 140 degrees Celsius and insulates against cold to -20 degrees Celsius. The sole also has a profile that is tailored to the qualities of the polyurethane, resulting in optimal slip resistance.
TriTechPlus®
HRO
300ºC
j a n o | s 3
s a n d I a | s 3
TriTechPlus®
HRO
300ºC
r u b I o | s 3
TriTechPlus®
HRO
300ºC
Z u n I | s 3
P e t u n | s 3
H u r o n | s 2 M o d o C | s 3
TriTechPlus®
HRO
300ºC
w e n r o | s 3
ESD
ESD
®
TriTechPlus®
HRO
300ºC
M a n s o | s 2 a C o M a | s 3
TriTechPlus®
HRO
300ºC
L u M b e e | s 3
TriTechPlus®
HRO
300ºC
d a Kota | s 3
10366_7166_cat_UK.indd 14-15 22-05-2007 13:30:37
B.A.S.S. Onze Lieve Vrouwstraat 40 B-2600 Berchem Belgium T: +32(0)3 230 19 75 F: +32(0)3 230 19 78 info@esdproducts.eu www.esdproducts.eu
HRO
300ºC
M 9 0 0 | s 3
etna the flame resistant effect of this sturdy sock is
due to combination of the special Kermel® fibre
with flame resistant virgin wool. with a terry
cushion sole and reinforced heel and toe for
extra protection and comfort.
• Flame resistant
• terry cushion foot
• reinforced heel and toe
size range: 35-38, 39-42, 43-4�, 47-50
uK size range: 3-5, �-8, 9-11, 12-14
Colour: black
Composition: �0% virgin wool (Zirpro®), 40%
Kermel® (aramid)
burGosspecially made to be worn with boots and in
cold weather. the terry cushion foot with
reinforced heel and toe ensures extra
protection and comfort while the combination
of virgin wool and Pro-Guards® keeps the feet
warm and dry.
• Keeps feet warm and dry
• terry cushion foot
• reinforced heel and toe
size range: 35-38, 39-42, 43-4�, 47-50
uK size range: 3-5, �-8, 9-11, 12-14
Colour: grey
Composition: 40% virgin wool, 29% polyamide,
20% Pro-Guards® (polyester), 10% cotton,
1% Lycra®
p a g e 1 �
BLACKFOOT | S2 Full grain leather/nappa bata Cool Comfort®-liningtritech Plus®-solewidths w-XwMondopoint size range: 255-307uK size range: �.5-12 (including 9.5)
CONCHO | S2Full grain leather/nappanappa/leather liningdual density Pu-solewidths w-XwMondopoint size range: 232-315uK size range: 4-13 (including �.5 and 9.5)
WASCO | S3 Full grain leather/nappa/ tPu toecap bata Cool Comfort®-liningtritech Plus®-solewidths w-XwMondopoint size range: 255-307uK size range: �.5-12 (including 9.5)
WICHITA | S1Full grain leathernappa/leather liningdual density Pu-solewidths w-XwMondopoint size range: 232-315uK size range: 4-13 (including �.5 and 9.5)
JUMANO | S3 Full grain leather/nappa/ tPu toecapnappa/leather liningtritech Plus®-solewidths w-XwMondopoint size range: 232-315uK size range: 4-13 (including �.5 and 9.5)
TONTO | S3 Full grain leather/tPu toecapFur liningtritech Plus®-solewidth XwMondopoint size range: 240-315uK size range: 5-13 (including �.5 and 9.5)
TAHO | S3 Full grain leather/tPu toecapFur liningtritech Plus®-solewidth XwMondopoint size range: 240-315uK size range: 5-13 (including �.5 and 9.5)
TEWA | S3 Full grain leather/tPu toecapno liningtritech Plus®-solewidth XwMondopoint size range: 240-315uK size range: 5-13 (including �.5 and 9.5)
M900 | S3Full grain leather/nappaLeather liningtritech Plus®-solewidth wMondopoint size range: 232-315 uK size range: 4-13 (including �.5 and 9.5)
The TriTech Plus®-sole, a PU mid-sole with a walking sole composed of three densities of rubber, displays its full benefits in situations in which an extremely high slip resistance is required. The sole is also particularly durable and is oil-, acid- and cut-resistant. It insulates from cold and is heat-resistant up to 300 degrees Celsius. The TriTech Plus®-sole is equipped with a profile tailored to the qualities of the rubber, guaranteeing optimal slip resistance.
TriTechPlus®
HRO
300ºC
ta H o | s 3
TriTechPlus®
HRO
300ºC
j u M a n o | s 3
TriTechPlus®
HRO
300ºC
t e wa | s 3
wa s C o | s 3
HRO
300ºC
TriTechPlus®
HRO
300ºC
to n to | s 3C o n C H o | s 2
®
TriTechPlus®
b L a C K F o ot | s 2
TriTechPlus®
w I C H I ta | s 1
HRO
300ºC
t H e n at u r a Lt h e p e r f e c t f i t f o r e v e r y f o o t
10366_7166_cat_UK.indd 16-17 22-05-2007 13:31:19
B.A.S.S. Onze Lieve Vrouwstraat 40 B-2600 Berchem Belgium T: +32(0)3 230 19 75 F: +32(0)3 230 19 78 info@esdproducts.eu www.esdproducts.eu
®
p a g e 1 8
s I o u X | s 1
C r e e K | s 2 L a G u n a | s 3
e r I e | s 2
TriTechPlus®
TriTechPlus®
y u C ata n | s 1
s e n e C a | s 2 s e r r a n o | s 3 C a n C u n | s 1
rIVa a sock for the optimum transport of moisture
in combination with Gore-teX® safety shoes.
• Keeps feet dry
• Contains silver® fibre with an
antibacterial effect
• terry cushion sole for extra comfort and
protection
size range: 35-38, 39-42, 43-4�, 47-50
uK size range: 3-5, �-8, 9-11, 12-14
Colour: black/grey
Composition: 70% Pro-Guards® (polyester),
22% polyamide, 5% Lycra®, 3% silver®
ESD
K a r o K | s 3
to r b at | s 3
TriTechPlus®
TriTechPlus®
Water vapour
Water droplets
Leather
Knit
GORE-TEX® membrane
Special felt
Lining
The primary characteristic of the lightweight and fast-drying GORE-TEX® laminate is that it is waterproof but also breathable. This effect is brought about by the special membrane whose pores are so small that water droplets cannot penetrate from the outside. However, the pores are large enough to allow water vapour molecules to pass through and be transported to the outside. As a result, feet stay dry and warm, and optimum comfort is provided.
SENECA | S2SERRANO | S3Full grain leather/nappanappa/leather liningdual density Pu-soleFour widthsMondopoint size range: 232-315uK size range: 4-13 (including �.5 and 9.5)
CREEK | S2 LAGUNA | S3 Full grain leather/nappanappa/leather liningtritech Plus®-soleFour widthsMondopoint size range: 232-315 uK size range: 4-13 (including �.5 and 9.5)
YUCATAN | S1Full grain leather/breathable nylon meshbata Cool Comfort®-liningdual density Pu-soleFour widthsMondopoint size range: 232-315uK size range: 4-13 (including �.5 and 9.5)
CANCUN | S1Full grain leather/breathable nylon meshbata Cool Comfort®-liningdual density Pu-soleFour widthsMondopoint size range: 232-315uK size range: 4-13 (including �.5 and 9.5)
SIOUX | S1Full grain leather with perforation/nappabata Cool Comfort®-liningdual density Pu-solewidths w-XwMondopoint size range: 232-315uK size range: 4-13 (including �.5 and 9.5)
ERIE | S2 Full grain pull up leather/nappabata Cool Comfort®-liningtritech Plus®-solewidth wMondopoint size range: 255-307uK size range: �.5-12 (including 9.5)
KAROK | S3 Full grain leatherGore-teX® laminatetritech Plus®-solewidths w-XwMondopoint size range: 232-315uK size range: 4-13 (including �.5 and 9.5)
TORBAT | S3 Full grain leather/tPu toecapGore-teX® laminatetritech Plus®-solewidths w-XwMondopoint size range: 232-315uK size range: 4-13 (including �.5 and 9.5)
HRO
300ºC
HRO
300ºC
HRO
300ºC
HRO
300ºC
yo u g e t f u r t h e r w i t h d ry f e e t
t H e n at u r a Lt h e p e r f e c t f i t f o r e v e r y f o o t
10366_7166_cat_UK.indd 18-19 22-05-2007 13:31:56
B.A.S.S. Onze Lieve Vrouwstraat 40 B-2600 Berchem Belgium T: +32(0)3 230 19 75 F: +32(0)3 230 19 78 info@esdproducts.eu www.esdproducts.eu
F O O T W E A R B E Y O N D S A F E T Y
G o r d o n wo o d s , i n s u l a t i o n i n d u s t r y
C o M F o rt H e a Lt H
s a F e t y
what makes every safety shoe from bata Industrials unique
every collection of bata Industrials has its own specific extras. but there is one invention that makes every safety shoe from bata Industrials outstanding: the ingenious Tunnelsystem®, which we developed with the renowned prof.dr. w. baumann, professor in biomechanics. this recognisable notch in the heel (the tunnel) can deform when it comes down, to spread the pressure over a larger surface area. This built-in shock absorber thus spares the joints and keeps the wearer upright. by spreading the load, it also gives the heel extra stability. this prevents tiredness, loss of concentration and hence a great many accidents.
Feet and joints have a lot to endure on the work floor. especially when you are constantly on the move throughout the day. If you miss your footing on a step or make other sudden movements, the stress loading can reach extreme levels. Heels, ankles and knees, as well as hips and spine must then absorb a shock equivalent to 3 to 4 times the body weight. A good work shoe absorbs these shocks so that the joints are spared and the wearer remains firmly on his or her well shod feet. Gordon woods is not as lighfooted as he used to be, so he can well use the extra support. He swears by bata Industrials’ footwear, which he has been wearing for 10 years.
w i t h t h e r i g h t C u s H I o n I n G y o u c a n a b s o r b a l o t
10366_7166_cat_UK.indd 20-21 22-05-2007 13:32:05
B.A.S.S. Onze Lieve Vrouwstraat 40 B-2600 Berchem Belgium T: +32(0)3 230 19 75 F: +32(0)3 230 19 78 info@esdproducts.eu www.esdproducts.eu
The new BS2000® from Bata Industrials is a well-thought- out safety shoe which combines optimum wearing comfort with the look of a sports shoe. The BS2000® is based on a contemporary design and wide last, and is equipped with various intelligent features and technology which are a welcome contribution to every wearer’s walking enjoyment.
The shoe is also equipped with a dual density PU anti-slip sole, and the active breathable and moisture-removing Bata Cool Comfort®-lining, which contributes to an optimum climate control in the shoe. Thanks to the ideal support for the natural action of the foot, the Easy Rolling System® provides the wearer with added comfort and energy savings. The built-in shock absorbing Tunnelsystem® spares the joints, keeps the wearer upright and ensures perfect stability. Equipped with the new TPU shank which combines a
stabiliser and shock-absorber, the BS2000® provides extra support to the mid-foot. The high-quality nubuck
upper adds the perfect finishing touch to this shoe available in sizes 35 through 49.
Several models from the BS2000® collection are manufactured with a sturdy and wear-resistant TPU toecap integrated into the design, which extends the life of the shoe, thus generating a cost-savings. In addition, the collection comprises a number of models in ESD (Electro Static Discharge) version:Tacoma, Ottawa, Toledo and Orlando. With these ESD models which more than satisfy the currently valid standards (0.1-35 MOhm), Bata Industrials offers the solution for preventing or limiting
electrostatic charging on the work floor, and to divert any charges generated in a controlled
and safe manner. Finally, especially for the ladies on the work floor, the BS2000®
collection has six fashionable, elegant and colourful models, available
in sizes 35 to 42.
t r I n I d a d | s 1
3549
b e r M u d a | s 1
ot tawa | s 3
b s 2 0 0 0®
o n c e a g a i n , s i m p l y i n a c l a s s a p a r t
p a g e 2 2
o n c e a g a i n
e X C e P t I o n a L Ly
s a F e
BERMUDA | S1Full grain leatherbata Cool Comfort®-liningdual density Pu-solesize range: 35-49 uK size range: 2-14 (including �.5 and 9.5)also available with grey outer sole
ORLANDO | S3nubuck leather/tPu toecapbata Cool Comfort®-liningdual density Pu-solesize range: 35-49uK size range: 2-14 (including �.5 and 9.5)
OTTAWA | S3nubuck leather/tPu toecapbata Cool Comfort®-liningdual density Pu-solesize range: 35-49uK size range: 2-14 (including �.5 and 9.5)
TRINIDAD | S1 Full grain leatherbata Cool Comfort®-liningdual density Pu-solesize range: 35-49 uK size range: 2-14 (including �.5 and 9.5)also available with grey outer sole
atLantIsa sturdy sock with reinforced heel and toe for
intensive use. the terry cushion sole provides
extra protection and comfort.
• Keeps feet dry and cool
• terry cushion sole
• reinforced heel and toe
size range: 35-38, 39-42, 43-4�, 47-50
uK size range: 3-5, �-8, 9-11, 12-14
Colours: black, marine, grey
Composition: 55% Pro-Guards® (polyester),
30% cotton, 14% polyamide, 1% Lycra®
3549
3549
ESD
oLyMPIadethe terry cushion sole in this neutral sock
offers extra protection and comfort of wear.
• Keeps feet dry and cool
• terry cushion sole
size range: 35-38, 39-42, 43-4�, 47-50
uK size range: 3-5, �-8, 9-11, 12-14
Colours: black, marine, grey
Composition: 50% Pro-Guards® (polyester),
30% cotton, 15% polyamide, 5% Lycra®
ESD
o r L a n d o | s 3
3549
*
*
* *
10366_7166_cat_UK.indd 22-23 22-05-2007 13:32:26
B.A.S.S. Onze Lieve Vrouwstraat 40 B-2600 Berchem Belgium T: +32(0)3 230 19 75 F: +32(0)3 230 19 78 info@esdproducts.eu www.esdproducts.eu
t r e n to n | s 3
C H a M o n I X | s 1
C o rt I n a | s 1
H e L s I n K I | s 1
3549
C o L o r a d o | s 2
to L e d o | s 2
b u F F a L o | s 2
ta C o M a | s 2
b a Lt I M o r e | s 3
o n c e a g a i n
e X C e P t I o n a L Ly
C o M F o rta b L e
p a g e 2 4
b s 2 0 0 0o n c e a g a i n , s i m p l y i n a c l a s s a p a r t
The new BS2000® also provides excellent grip with a light, flexible sole of dual density polyurethane. New features include the attractive profile and the extra thick mid-sole on the outer side which improves damping and stability.
TOLEDO | S2nubuck leatherbata Cool Comfort®-liningdual density Pu-solesize range: 3�-49uK size range: 3-14 (including �.5 and 9.5)
COLORADO | S2nubuck leatherbata Cool Comfort®-liningdual density Pu-solesize range: 3�-49uK size range: 3-14 (including �.5 and 9.5)
TACOMA | S2nubuck leatherbata Cool Comfort®-liningdual density Pu-solesize range: 39-49uK size range: �-14 (including �.5 and 9.5)
BUFFALO | S2nubuck leatherbata Cool Comfort®-liningdual density Pu-solesize range: 39-49uK size range: �-14 (including �.5 and 9.5)
TRENTON | S3 nubuck leather/tPu toecapbata Cool Comfort®-liningdual density Pu-solesize range: 39-49uK size range: �-14 (including �.5 and 9.5)
BALTIMORE | S3nubuck leather/tPu toecapbata Cool Comfort®-liningdual density Pu-solesize range: 39-49uK size range: �-14 (including �.5 and 9.5)
CHAMONIX | S1nubuck leather/breathable nylon meshbata Cool Comfort®-liningdual density Pu-solesize range: 3�-49uK size range: 3-14 (including �.5 and 9.5)
CORTINA | S1nubuck leather/breathable nylon meshbata Cool Comfort®-liningdual density Pu-solesize range: 3�-49uK size range: 3-14 (including �.5 and 9.5)
HELSINKI | S1nubuck leatherbata Cool Comfort®-liningdual density Pu-solesize range: 35-49uK size range: 2-14 (including �.5 and 9.5)
o n c e a g a i n
e X C e P t I o n a L Ly
s P o rt y
3649
3649
3649
3649
ESD
sydneya casual sock with terry cushion sole for extra
protection and comfort.
• Keeps feet dry and cool
• terry cushion sole
size range: 35-38, 39-42, 43-4�, 47-50
uK size range: 3-5, �-8, 9-11, 12-14
Colours: black/grey, black/beige
Composition: 50% Pro-Guards® (polyester),
30% cotton, 15% polyamide, 5% Lycra®
ESD
®
10366_7166_cat_UK.indd 24-25 22-05-2007 13:32:55
B.A.S.S. Onze Lieve Vrouwstraat 40 B-2600 Berchem Belgium T: +32(0)3 230 19 75 F: +32(0)3 230 19 78 info@esdproducts.eu www.esdproducts.eu
ot tawa e s d | s 3
ESD
TACOMA ESD | S2nubuck leatherbata Cool Comfort®-liningdual density Pu-solesize range: 39-48uK size range: �-13 (including �.5 and 9.5)
TOLEDO ESD | S2nubuck leatherbata Cool Comfort®-liningdual density Pu-solesize range: 35-48uK size range: 2-13 (including �.5 and 9.5)
ORLANDO ESD | S3nubuck leather/tPu toecapbata Cool Comfort®-liningdual density Pu-solesize range: 3�-48uK size range: 3-13 (including �.5 and 9.5)
OTTAWA ESD | S3nubuck leather/tPu toecapbata Cool Comfort®-liningdual density Pu-solesize range: 39-48uK size range: �-13 (including �.5 and 9.5)
ta C o M a e s d | s 2
b s 2 0 0 0o n c e a g a i n , s i m p l y i n a c l a s s a p a r t
®
É é n V o n K j e i s g e n o e g …
ESD
o r L a n d o e s d | s 3
ESD
to L e d o e s d | s 2
ESD
o n c e a g a i n
eXCePtIonaLLy
eLeGant
L e n a | s 1
K at y | s 1
a n n a | s 1
L u n a | s 1 e r I C a | s 1 P
e Va | s 1
3542
KATY | S1nubuck leatherbata Cool Comfort®-liningdual density Pu-solesize range: 35-42 uK size range: 2-8 (including �.5)
ANNA | S1nubuck leatherbata Cool Comfort®-liningdual density Pu-solesize range: 35-42 uK size range: 2-8 (including �.5)
LUNA | S1ERICA | S1 Pnubuck leatherbata Cool Comfort®-liningdual density Pu-solesize range: 35-42 uK size range: 2-8 (including �.5)
EVA | S1nubuck leatherbata Cool Comfort®-liningdual density Pu-solesize range: 35-42 uK size range: 2-8 (including �.5)
LENA | S1nubuck leather/suede/full grain leatherbata Cool Comfort®-liningdual density Pu-solesize range: 35-42 uK size range: 2-8 (including �.5)
s p e c i a l l y f o r L a d I e s
3542
3542
3542
3542
o n e s Pa r K i s e n o u g h
3548
p a g e 2 �
10366_7166_cat_UK.indd 26-27 22-05-2007 13:33:19
B.A.S.S. Onze Lieve Vrouwstraat 40 B-2600 Berchem Belgium T: +32(0)3 230 19 75 F: +32(0)3 230 19 78 info@esdproducts.eu www.esdproducts.eu
F O O T W E A R B E Y O N D S A F E T Y
j o h n C r a w l e y , p r o c e s s i n d u s t r y
bata Industrials stands on a firm foundation
selecting the most suitable sole type is dependent on the working surface, the degree to which this is polluted and the tasks someone has to perform. that is why bata Industrials has developed several types of outer soles, each with its own profile. In order of slip resistance these are Pu, which is above all light and flexible, tPu, which is antislip in all directions and TriTech Plus®, a sole manufactured using three densities of rubber, which is extra wear resistant and offer maximum protection against slipping, shards, oils, acids and heat (to 300 degrees Centigrade). This means that we can provide the right grip on the work floor under all circumstances.
Slips, stumbles and falls are still the main cause of accidents at work in all sectors of industry! Companies that arm themselves against this with the right footwear, get considerably more grip on the often long-term absences that are a consequence of such loss of footing. such footwear is certainly not an extravagance, because however careful you are, something can always go wrong. and of course this is what you need to be prepared for. so john Crawley is always glad that he has his bata Industrials safety shoes on when bottles fall off the conveyor belt. They not only protect him against broken glass, but are also water resistant and ensure that he doesn’t slip on the beer.
t h e G r I P t o s t a y i n b a l a n c e
C o M F o rt
H e a Lt H
s a F e t y
10366_7166_cat_UK.indd 28-29 22-05-2007 13:33:27
B.A.S.S. Onze Lieve Vrouwstraat 40 B-2600 Berchem Belgium T: +32(0)3 230 19 75 F: +32(0)3 230 19 78 info@esdproducts.eu www.esdproducts.eu
G r e e n w I C H | s 2
b r o o K Ly n e s d | s 2
ESD
b r o o K Ly n | s 2
C H e L s e a | s 3
b r I G I t t e | s 2
V e r o n I Q u e | s 2
a n G e L I Q u e | s 2
e L o d I e | s 2
e L e G a n C e ®
s a f e t y i n a f e m i n i n e f o r m
Our Elegance® collection brings feminine refinement to light industry. They are just as protective as the other collections which Bata Industrials developed for this working environment but are distinguished, above all, by their fashionable design. Expressed particularly in the shape and subtle accentuation of the last, which has been developed according to the latest fashion.
Elegance® is made in materials with a stylish image: black full grain leather and oiled nubuck. For optimum climate management in the shoe a breathable lining of leather in combination with Dri-Lex® is used. And of course Elegance® also incorporates the shock absorbing Tunnelsystem® unique to Bata Industrials. Together, this makes this fine collection an elegant and comfortable presence on the work floor.
p a g e 3 0
wa L L s t r e e t ®
I n b u s i n e s s t e r m s , t h e s a f e s t o p t i o n
For managers in industry or construction, a representative appearance is just as important as protection and comfort. Bata Industrials has developed the Wallstreet® collection especially for these wearers. These stylish safety shoes exceed all of the legal standards, but are also attractive when worn with any suit. This makes them ideal to step right onto the work floor from the office, without having to change one’s shoes.
The timeless Wallstreet® models are manufactured using top quality, full grain leather. The breathable lining, a combination of leather and Dri-Lex®, ensures optimum and airy wearing comfort. The pre-formed inlay soles also make a contribution in this regard. They also ensure an even distribution of pressure during walking. Together with the perfect fit, the Wallstreet® is an interesting option for every manager.
With the ESD model Brooklyn, Bata Industrials offers the solution for preventing or limiting electrostatic charging on the work floor, and to divert any charges generated in a controlled and safe manner.
Even the very light and supple dual density polyurethane sole looks elegant.
The light and supple sole of dual density polyurethane prevents slips on the work floor. Naturally the Wallstreet® also incorporates the shock absorbing Tunnelsystem® of Bata Industrials.
ANGELIQUE | S2Full grain leatherdri-Lex®/leather liningdual density Pu-solesize range: 3�-42uK size range: 3-8 (including �.5)
ELODIE | S2Full grain leatherdri-Lex®/leather liningdual density Pu-solesize range: 3�-42uK size range: 3-8 (including �.5)
VERONIQUE | S2Full grain leatherdri-Lex®/leather liningdual density Pu-solesize range: 3�-42uK size range: 3-8 (including �.5)
BRIGITTE | S2nubuck leatherdri-Lex®/leather liningdual density Pu-solesize range: 3�-42uK size range: 3-8 (including �.5)
BROOKLYN | S2Full grain leatherdri-Lex®/leather liningdual density Pu-solesize range: 39-47uK size range: �-12 (including �.5 and 9.5)
BROOKLYN ESD | S2Full grain leatherdri-Lex®/leather liningsingle density Pu-solesize range: 39-47uK size range: �-12 (including �.5 and 9.5)
GREENWICH | S2Full grain leatherdri-Lex®/leather liningdual density Pu-solesize range: 39-47uK size range: �-12 (including �.5 and 9.5)
CHELSEA | S3Full grain leatherdri-Lex®/leather liningdual density Pu-solesize range: 39-47uK size range: �-12 (including �.5 and 9.5)
3642
3642
3642
3642
10366_7166_cat_UK.indd 30-31 22-05-2007 13:33:41
B.A.S.S. Onze Lieve Vrouwstraat 40 B-2600 Berchem Belgium T: +32(0)3 230 19 75 F: +32(0)3 230 19 78 info@esdproducts.eu www.esdproducts.eu
F O O T W E A R B E Y O N D S A F E T Y
b o b F r a s e r , a u t o m o b i l e i n d u s t r y
C o M F o rt H e a Lt H
s a F e t y
the details make the difference
to prevent feet becoming tired bata Industrials devotes a lot of attention to the flexibility of the sole and the weight of the materials from which the shoe is made up. but also to the quality of the footbed and the shape of the last. one of our latest findings in that area is the Easy Rolling System®, a subtle adaptation with major consequences. By pre-forming the front of the foot the natural motion of the foot is supported in an optimum way. the effect of this is energy saving and comfort increasing. It is details of this kind which make the difference on the work floor.
tiredness is one of the most important causes of accidents in the workplace. which is why most of these occur at the end of the working day. because whoever gets tired feels their concentration going and they are more liable to stumble or make mistakes. In view of the fact that tiredness starts in the feet, the choice of footwear is very important. bob Fraser agrees with this. not only for him and his co-workers but also for his company. Preventing accidents helps cut absenteeism. as a wearer you can’t always identify what makes the difference, but bob Fraser really feels it at the end of a hard working day. His new batas feel fine and supple on his feet and hardly use up any energy when walking.
we k n o w w h a t r e L a X at I o n c a n d o
10366_7166_cat_UK.indd 32-33 22-05-2007 13:33:49
B.A.S.S. Onze Lieve Vrouwstraat 40 B-2600 Berchem Belgium T: +32(0)3 230 19 75 F: +32(0)3 230 19 78 info@esdproducts.eu www.esdproducts.eu
C a M b r I d G e | 0 1
M u y b r I d G e ®
a s h o e t o g o t h e d i s t a n c e
There are numerous jobs in which the principal role of the work shoe is not so much offering protection as extra support and comfort. This is particularly welcome for people who need to walk great distances such as security guards, waiters, police and for example retail staff. For such people, Muybridge® is the perfect shoe. The pre-formed last of Bata Industrials guarantees a completely natural fit, while the refined sole provides damping and grip. It also supports the natural progression of the front of the foot, so that walking takes a minimum of energy. So who’ever wears Muybridge® to work is much less readily tired. Other alleviating circumstances for lots of walking certainly include the supple leather and the more than comfortable heel edge of Muybridge®. Above all it is a shoe that combines easily with many types of clothing. All of this makes Muybridge® so much in demand in so many work situations.
p a g e 3 4
CAMBRIDGE | 01Full grain leatherbata air Xtreme®/nappa liningdual density Pu-soleMondopoint size range: 247-307uK size range: �-12 (including �.5 and 9.5)
As light as it is supple, the dual density polyurethane sole was specially developed for people who need to go the distance doing their job.
10366_7166_cat_UK.indd 34 22-05-2007 13:33:51
B.A.S.S. Onze Lieve Vrouwstraat 40 B-2600 Berchem Belgium T: +32(0)3 230 19 75 F: +32(0)3 230 19 78 info@esdproducts.eu www.esdproducts.eu
top related