amp16 periflo amp series - john brooks company · amp series. simple operating design . the simple...
TRANSCRIPT
ENGINEERED PRODUCTS
Peristaltic pumps deliver more than you expect
AMP16
Flowto 112 gph (426 lph)
Pressureto 115 psi (7.9 bar)
TemperatureProduct to 176° F (80° C)Ambient to 104° F (40° C)
ApplicationsMetering, batching, transfer and sampling
AMP16 — a real workhorse of a general-purpose pump.Like all Pulsafeeder peristaltic pumps, the AMP16 is ideally suited for water and wastewater treatment, petrochemical and mining industries — including polymers and slurries.
PeriFlo® AMP Series
Simple operating design The simple design of a PeriFlo® pump results in a pump that is valveless and sealless (creating a gentle pumping action), has reversible rotation, high suction lift, higher solids content handing ability and easy maintenance.
Variety of MediaThanks to its gentle pumping action, a peristaltic pump can handle a variety of media where other technologies are unsuccessful, including chemicals, slurries, viscous, abrasive or shear sensitive media such as polymers.
Pump Longer The simple design means there are no valves to change and no seals to replace. The hose or tube element is the common wear part and is easy to replace. This means less down-time, less spare parts inventory and more pumping.
85.480
60
40
20
00 20 40 60 80 100 112.72
Sp
eed
RP
M(b
ased
on
1725
RP
M m
otor
)
Flow GPH
30 PSI / 85.4 RPM60 PSI / 69.0 RPM 60 PSI / 85.4 RPM115 PSI / 42.8 RPM 115 PSI / 69.0 RPM
Note: Continuous Duty = run time greater than 2 hoursIntermittent Duty = run time less than 2 hours with a 1 hour rest period between run times
Max Pressure/RPMfor Continuous Duty Cycle
Intermittent Duty Cycle
Flow vs. RPM
12.2311.0
11.1282.4
.24.8
8.2
208.0
.75" NPT
10.8274.8
6.5165.0
2.562.3
5.2133.1
2.666.6
8.7220.0
12.6321.2
15.6[396.2]
9.0228.6
HIGH SPEED
LOW SPEED
2X 7.4189.2
2X 6.3160.3
3.896.7
CLEARANCE FORM10 BOLTS
AMP16
Measurements: in [mm]
ENGINEERED PRODUCTS
Pulsafeeder Engineered ProductsA Unit of IDEX Corporation2883 Brighton Henrietta TL Rd • Rochester, NY 14623Phone: +1 (585) 292-8000 • [email protected] PFAMP16spec_Rev0314
Spec Pulsafeeder. Get more than you expect.
PerformanceSpecifications
Features & Benefits
Materials of Construction
Drives & Accessories
Dimensions
Max capacity 0.022 gal/rev
Max flow rate 112 gph (426 lph)
Connections 3/4" MNPT, 3/4" Camlock
Compressor Rollers
Max tube pressure 30 psi (2 bar)
Max hose pressure 115 psi (7.9 bar)
Top View
Side View
Front view
• Sealless and Valveless• Close coupled• Abrasion resistant• Dry-run capable• Self priming to 27 ft.• Reversible rotation• Easy maintenance
• Variable speed controls with industry standard I/O’s
• Tube/Hose leak detection • Pulsation dampeners • Suction accumulators• Pressure relief valves
Hose: Natural rubber, Buna, EPDMTube: NorpreneConnections: Male NPT: PVC or
stainless steel as standard; Optional: Male NPT PVDF or Camlock PVC
Casing: Powder coated aluminumRotor: Black oxide steelRollers: Black oxide steelHardware: Stainless steel
PeriFlo® AMP16
AMP16 Weight (with standard motor): 70 lbs.
© Copyright 2014 Pulsafeeder. All Rights Reserved.