ampg archcomp-sexbolts

A2

AccurateManufactured Products Group

Sex Bolts & Mating Fasteners

SPECIAL ORDERS AVAILABLE—

Small Quantitiesto Large Volume

Tamperproof Sex Bolts

A solution that replaces the traditional partition sex bolts, with superior drive characteristics, and a wider range of sizes. (See chart on facing page for available sizes and order numbers)

6 Lobe with Pin Security Sex Bolts—The Complete System

• Male screws available with or without shoulders. • All parts are matched for a � nished appearance. • Both female and male bolts feature the 6-Lobe with Pin Security Drive. • 6-Lobe drive has many advantages— No cam out during installation No head distortion during driving, No special tooling required for both installation and removal.• Head dimensions for both male and female parts are matched,

per IFI standards.

See chart on facing page for available sizes and order numbers Truss Head 6 Lobe with Pin Security Screws

18-8 Stainless Steel

HEADDIAMETER

HEAD HEIGHT LENGTH

• Male screws available with or without shoulders. •6-Lobe drive has many advantages— No cam out during installation No head distortion during driving, No special tooling required for both installation and removal.

Truss Head 6 Lobe with Pin SHOULDER Security Screws 18-8 Stainless Steel

GO GAGE PENETRATION: .070 MIN.TAMPER RESISTANT 6-LOBE T27 DRIVESTANDARD 1/4 TRUSS HEAD

HEADDIAMETER

HEADHEIGHT

THREADLENGTH

SHOULDER LENGTH


THREADDEPTH

BARREL LENGTH

BARREL DIAMETER

HEADDIAMETER

HEAD HEIGHT

THREAD SIZE

Phone: 317-472-9000 • FAX: 317-472-9010 • email: [email protected] • www.ampg.com/archAccurateManufactured Products Group

AA2

A3



Phone: 317-472-9000 • FAX: 317-472-9010 • email: [email protected] • www.ampg.com/arch AA3


Female Truss Head Sex Bolts — 6 Lobe with Pin Security DriveFemale Sex Bolts and Male Tamperproof Truss Head Screws are sold separately

Barrel Barrel Thread Thread Head Head Drive OrderDiameter Length Size Depth Diameter Height Size Number

3/8” 10-24 1/4” 7/16” 7/64” T 20 Z4406T6S1/2 10-24 1/4 7/16 7/64 T 20 Z4408T6S 5/8 10-24 1/4 7/16 7/64 T 20 Z4410T6S3/4 10-24 3/8 7/16 7/64 T 20 Z4412T6S1 10-24 3/8 7/16 7/64 T 20 Z4416T6S

1-1/4 10-24 3/8 7/16 7/64 T 20 Z4420T6S 1-1/2 10-24 3/8 7/16 7/64 T 20 Z4424T6S

1/2 1/4-20 1/4 9/16 9/64 T 27 Z4443T6S3/4 1/4-20 3/8 9/16 9/64 T 27 Z4444T6S 1 1/4-20 3/8 9/16 9/64 T 27 Z4446T6S

1-1/4 1/4-20 3/8 9/16 9/64 T 27 Z4448T6S1-1/2 1/4-20 3/8 9/16 9/64 T 27 Z4449T6S

Order Hex OrderDrive Number Size Size NumberT 20 KEYT20 T 20 1/4” BITT20T 27 KEYT27 T 27 1/4” BITT27

6 Lobe Hex Key 6 Lobe with Pin Bit

1/4

5/16

6 Lobe Tamperproof Security—Female Barrels 18-8 ST/ST

Head Head OrderSize Diameter Height Drive Number

10-24 X 1/4” 7/16” 7/64” T 20 Z4580SS10-24 X 1/2 7/16 7/64 T 20 Z4582SS10-24 X 1 7/16 7/64 T 20 Z4588SS

1/4-20 X 1/4 9/16 9/64 T 27 Z4591SS1/4-20 X 3/8 9/16 9/64 T 27 Z4590SS1/4-20 X 1/2 9/16 9/64 T 27 Z4592SS

Shoulder Total Length Shoulder Thread Head Head OrderSize Diameter Under Head Length Length Diameter Height Drive Number

10-24 X 1/4” 1/4” 3/8” 1/8” 1/4” 7/16” 7/64” T20 Z4581SS10-24 X 1/4 1/4 1/2 1/4 1/4 7/16 7/64 T20 Z4583SS10-24 X 3/8 1/4 5/8 1/4 3/8 7/16 7/64 T20 Z4584SS10-24 X 5/8 1/4 7/8 1/4 5/8 7/16 7/64 T20 Z4585SS10-24 X 7/8 1/4 1-1/8 1/4 7/8 7/16 7/64 T20 Z4586SS

1/4-20 X 1/4 5/16 1/2 1/4 1/4 9/16 9/64 T27 Z4593SS1/4-20 X 3/8 5/16 1/2 1/8 3/8 9/16 9/64 T27 Z4597SS1/4-20 X 3/8 5/16 5/8 1/4 3/8 9/16 9/64 T27 Z4594SS1/4-20 X 5/8 5/16 7/8 1/4 5/8 9/16 9/64 T27 Z4595SS1/4-20 X 7/8 5/16 1-1/8 1/4 7/8 9/16 9/64 T27 Z4596SS

18-8 STAINLESSSTEEL

6 Lobe with Pin Truss Head Security Screws

18-8 STAINLESSSTEEL

6 Lobe with PinTruss Head Security Screws WITH SHOULDER


10-24 X 1/4” 7/16” 7/64” T 20 Z4580SS10-24 X 1/2 7/16 7/64 T 20 Z4582SS10-24 X 1 7/16 7/64 T 20 Z4588SS

1/4-20 X 1/4 9/16 9/64 T 27 Z4591SS1/4-20 X 3/8 9/16 9/64 T 27 Z4590SS1/4-20 X 1/2 9/16 9/64 T 27 Z4592SS


10-24 X 1/4” 1/4” 3/8” 1/8” 1/4” 7/16” 7/64” T20 Z4581SS10-24 X 1/4 1/4 1/2 1/4 1/4 7/16 7/64 T20 Z4583SS10-24 X 3/8 1/4 5/8 1/4 3/8 7/16 7/64 T20 Z4584SS10-24 X 5/8 1/4 7/8 1/4 5/8 7/16 7/64 T20 Z4585SS10-24 X 7/8 1/4 1-1/8 1/4 7/8 7/16 7/64 T20 Z4586SS

1/4-20 X 1/4 5/16 1/2 1/4 1/4 9/16 9/64 T27 Z4593SS1/4-20 X 3/8 5/16 1/2 1/8 3/8 9/16 9/64 T27 Z4597SS1/4-20 X 3/8 5/16 5/8 1/4 3/8 9/16 9/64 T27 Z4594SS1/4-20 X 5/8 5/16 7/8 1/4 5/8 9/16 9/64 T27 Z4595SS1/4-20 X 7/8 5/16 1-1/8 1/4 7/8 9/16 9/64 T27 Z4596SS

18-8 STAINLESSSTEEL

6 Lobe with Pin Truss Head Security Screws

18-8 STAINLESSSTEEL

6 Lobe with PinTruss Head Security Screws WITH SHOULDER



1-1/4 10-24 3/8 7/16 7/64 T 20 Z4420T6S 1-1/2 10-24 3/8 7/16 7/64 T 20 Z4424T6S

1/2 1/4-20 1/4 9/16 9/64 T 27 Z4443T6S3/4 1/4-20 3/8 9/16 9/64 T 27 Z4444T6S 1 1/4-20 3/8 9/16 9/64 T 27 Z4446T6S

1-1/4 1/4-20 3/8 9/16 9/64 T 27 Z4448T6S1-1/2 1/4-20 3/8 9/16 9/64 T 27 Z4449T6S



1/4

5/16


Tamperproof Security Tools



1-1/4 10-24 3/8 7/16 7/64 T 20 Z4420T6S 1-1/2 10-24 3/8 7/16 7/64 T 20 Z4424T6S

1/2 1/4-20 1/4 9/16 9/64 T 27 Z4443T6S3/4 1/4-20 3/8 9/16 9/64 T 27 Z4444T6S 1 1/4-20 3/8 9/16 9/64 T 27 Z4446T6S

1-1/4 1/4-20 3/8 9/16 9/64 T 27 Z4448T6S1-1/2 1/4-20 3/8 9/16 9/64 T 27 Z4449T6S



1/4

5/16


IMPORT &


A4





ALL-NEW EXTRA LARGE SHOULDER Security Screws —18-8 Stainless Steel

Female Sex Bolts and Male Tamperproof Truss Head Screws are sold separately

HEADDIAMETER

HEAD HEIGHT LENGTH


HEADDIAMETER

HEADHEIGHT

THREADLENGTH

SHOULDER LENGTH

ALL-NEW EXTRA LARGE Security Screws —18-8 Stainless Steel

Tamperproof Security Tools for Extra Large Tamperproof Sex Bolts


1/2" 3/8-16 5/16" 7/8” 1/4” T40 Z4900T6S3/4 3/8-16 7/16 7/8 1/4 T40 Z4901T6S 1 3/8-16 5/8 7/8 1/4 T40 Z4902T6S

1-1/2 3/8-16 5/8 7/8 1/4 T40 Z4903T6S2 3/8-16 5/8 7/8 1/4 T40 Z4904T6S

1/2 1/2-13 5/16 1” 5/16” T40 Z4906T6S3/4 1/2-13 7/16 1 5/16 T40 Z4907T6S1 1/2-13 5/8 1 5/16 T40 Z4908T6S

1-1/2 1/2-13 5/8 1 5/16 T40 Z4909T6S2 1/2-13 5/8 1 5/16 T40 Z4910T6S

1/2 5/8-11 5/16 1-1/8” 3/8” T45 Z4912T6S3/4 5/8-11 7/16 1-1/8 3/8 T45 Z4913T6S1 5/8-11 3/4 1-1/8 3/8 T45 Z4914T6S

1-1/2 5/8-11 3/4 1-1/8 3/8 T45 Z4915T6S2 5/8-11 3/4 1-1/8 3/8 T45 Z4916T6S

1/2 3/4-10 5/16 1-1/4" 1/2” T45 Z4918T6S3/4 3/4-10 7/16 1-1/4 1/2 T45 Z4919T6S1 3/4-10 3/4 1-1/4 1/2 T45 Z4920T6S

1-1/2 3/4-10 3/4 1-1/4 1/2 T45 Z4921T6S2 3/4-10 3/4 1-1/4 1/2 T45 Z4922T6S

Order Hex OrderDrive Number Size Size NumberT40 KEYT40 T40 1/4" BITT40T45 KEYT45 T45 1/4" BITT45


EXTRA LARGE 6 Lobe Tamperproof—Female Barrels 18-8 ST/ST

1/2

5/8

3/4

7/8


1/2" 3/8-16 5/16" 7/8” 1/4” T40 Z4900T6S3/4 3/8-16 7/16 7/8 1/4 T40 Z4901T6S 1 3/8-16 5/8 7/8 1/4 T40 Z4902T6S

1-1/2 3/8-16 5/8 7/8 1/4 T40 Z4903T6S2 3/8-16 5/8 7/8 1/4 T40 Z4904T6S

1/2 1/2-13 5/16 1” 5/16” T40 Z4906T6S3/4 1/2-13 7/16 1 5/16 T40 Z4907T6S1 1/2-13 5/8 1 5/16 T40 Z4908T6S

1-1/2 1/2-13 5/8 1 5/16 T40 Z4909T6S2 1/2-13 5/8 1 5/16 T40 Z4910T6S

1/2 5/8-11 5/16 1-1/8” 3/8” T45 Z4912T6S3/4 5/8-11 7/16 1-1/8 3/8 T45 Z4913T6S1 5/8-11 3/4 1-1/8 3/8 T45 Z4914T6S

1-1/2 5/8-11 3/4 1-1/8 3/8 T45 Z4915T6S2 5/8-11 3/4 1-1/8 3/8 T45 Z4916T6S

1/2 3/4-10 5/16 1-1/4" 1/2” T45 Z4918T6S3/4 3/4-10 7/16 1-1/4 1/2 T45 Z4919T6S1 3/4-10 3/4 1-1/4 1/2 T45 Z4920T6S

1-1/2 3/4-10 3/4 1-1/4 1/2 T45 Z4921T6S2 3/4-10 3/4 1-1/4 1/2 T45 Z4922T6S




1/2

5/8

3/4

7/8

ALL-NEW EXTRA LARGE Tamperproof Sex Bolts

A solution for playground equipment, exercise equipment, detention centers, hospitals, or any other public spaces that need security hardware.

• Male screws available with or without shoulders. • All parts are matched for a � nished appearance. • Both female and male bolts feature the

6-Lobe with Pin Security Drive. • 6-Lobe drive has many advantages— No cam out during installation No head distortion during driving, No special tooling required for both installation

and removal.• Head dimensions for both male and female parts

are matched, per IFI standards.


See chart on facing page for available sizes and order numbers


AA4

A5





3/8-16 x 3/4" 7/8" 1/4" T40 Z4925SS3/8-16 x 1-1/2 7/8 1/4 T40 Z4926SS

1/2-13 x 3/4 1 5/16 T40 Z4928SS1/2-13 x 1-1/2 1 5/16 T40 Z4929SS

5/8-11 x 3/4 1-1/8 3/8 T45 Z4931SS5/8-11 x 1-1/2 1-1/8 3/8 T45 Z4932SS

3/4-10 x 3/4 1-1/4 1/2 T45 Z4934SS3/4-10 x 1-1/2 1-1/4 1/2 T45 Z4935SS


3/8-16 x 3/4" 1/2" 1" 1/4" 3/4" 7/8" 1/4" T40 Z4938SS3/8-16 x 1-1/2 1/2 1-3/4 1/4 1-1/2 7/8 1/4 T40 Z4940SS

1/2-13 x 3/4 5/8 1 1/4 3/4 1 5/16 T40 Z4945SS

1/2-13 x 1-1/2 5/8 1-3/4 1/4 1-1/2 1 5/16 T40 Z4947SS

5/8-11 x 3/4 3/4 1 1/4 3/4 1-1/8 3/8 T45 Z4950SS5/8-11 x 1-1/2 3/4 1-3/4 1/4 1-1/2 1-1/8 3/8 T45 Z4952SS

3/4-10 x 3/4 7/8 1 1/4 3/4 1-1/4 1/2 T45 Z4955SS

3/4-10 x 1-1/2 7/8 1-3/4 1/4 1-1/2 1-1/4 1/2 T45 Z4957SS

18-8 STAINLESSSTEEL

EXTRA LARGE 6 Lobe with Pin Truss Head Security Screws

18-8 STAINLESSSTEEL

EXTRA LARGE 6 Lobe with PinTruss Head Security Screws WITH SHOULDER


3/8-16 x 3/4" 7/8" 1/4" T40 Z4925SS3/8-16 x 1-1/2 7/8 1/4 T40 Z4926SS

1/2-13 x 3/4 1 5/16 T40 Z4928SS1/2-13 x 1-1/2 1 5/16 T40 Z4929SS

5/8-11 x 3/4 1-1/8 3/8 T45 Z4931SS5/8-11 x 1-1/2 1-1/8 3/8 T45 Z4932SS

3/4-10 x 3/4 1-1/4 1/2 T45 Z4934SS3/4-10 x 1-1/2 1-1/4 1/2 T45 Z4935SS


3/8-16 x 3/4" 1/2" 1" 1/4" 3/4" 7/8" 1/4" T40 Z4938SS3/8-16 x 1-1/2 1/2 1-3/4 1/4 1-1/2 7/8 1/4 T40 Z4940SS

1/2-13 x 3/4 5/8 1 1/4 3/4 1 5/16 T40 Z4945SS

1/2-13 x 1-1/2 5/8 1-3/4 1/4 1-1/2 1 5/16 T40 Z4947SS

5/8-11 x 3/4 3/4 1 1/4 3/4 1-1/8 3/8 T45 Z4950SS5/8-11 x 1-1/2 3/4 1-3/4 1/4 1-1/2 1-1/8 3/8 T45 Z4952SS

3/4-10 x 3/4 7/8 1 1/4 3/4 1-1/4 1/2 T45 Z4955SS

3/4-10 x 1-1/2 7/8 1-3/4 1/4 1-1/2 1-1/4 1/2 T45 Z4957SS

18-8 STAINLESSSTEEL

EXTRA LARGE 6 Lobe with Pin Truss Head Security Screws

18-8 STAINLESSSTEEL

EXTRA LARGE 6 Lobe with PinTruss Head Security Screws WITH SHOULDER

ALL-NEW EXTRA LARGE Truss Head Sex Bolts — 6 Lobe with Pin Security DriveFemale Sex Bolts and Male Tamperproof Truss Head Screws are sold separately


1/2" 3/8-16 5/16" 7/8” 1/4” T40 Z4900T6S3/4 3/8-16 7/16 7/8 1/4 T40 Z4901T6S 1 3/8-16 5/8 7/8 1/4 T40 Z4902T6S

1-1/2 3/8-16 5/8 7/8 1/4 T40 Z4903T6S2 3/8-16 5/8 7/8 1/4 T40 Z4904T6S

1/2 1/2-13 5/16 1” 5/16” T40 Z4906T6S3/4 1/2-13 7/16 1 5/16 T40 Z4907T6S1 1/2-13 5/8 1 5/16 T40 Z4908T6S

1-1/2 1/2-13 5/8 1 5/16 T40 Z4909T6S2 1/2-13 5/8 1 5/16 T40 Z4910T6S

1/2 5/8-11 5/16 1-1/8” 3/8” T45 Z4912T6S3/4 5/8-11 7/16 1-1/8 3/8 T45 Z4913T6S1 5/8-11 3/4 1-1/8 3/8 T45 Z4914T6S

1-1/2 5/8-11 3/4 1-1/8 3/8 T45 Z4915T6S2 5/8-11 3/4 1-1/8 3/8 T45 Z4916T6S

1/2 3/4-10 5/16 1-1/4" 1/2” T45 Z4918T6S3/4 3/4-10 7/16 1-1/4 1/2 T45 Z4919T6S1 3/4-10 3/4 1-1/4 1/2 T45 Z4920T6S

1-1/2 3/4-10 3/4 1-1/4 1/2 T45 Z4921T6S2 3/4-10 3/4 1-1/4 1/2 T45 Z4922T6S




1/2

5/8

3/4

7/8

Tamperproof Sex Bolts IMPORT &


A6





One Way Head Bath Partition Sex Bolts

Socket Drive Barrel Bolts

Button Head Socket Drive Barrel Bolts — Female 18-8 Stainless Steel

THREADDEPTH

BARREL LENGTH

BARREL DIAMETER

HEADDIAMETERHEAD HEIGHTTHREAD SIZE

Button Head Socket Drive Barrel Bolts

A line of contemporary barrel bolts that have a button head with a hex drive. The smooth domed appearance of the head lends a sleek � nished look to all products and installations.

Our standard size range is from 1/4" diameter x 3/8" length up to 7/8" diameter x 3" length. Manufactured in the USA from durable and corrosion-resistant Type 303 Stainless Steel, these parts are fully machined for a more precise part.

Used in industrial, construction, marine, and transportation, they rpovide excellent strength and versatility. Used in furniture and commercial applications, they present a beautiful modern look and � nished appearance.

Specials in any size are available with a quick turn-around from our factory.See chart on facing

page for available sizes and order numbers

THESE SEX BOLTS ARE ALLMADE IN

USA


AA6

A7




Barrel Barrel Thread Thread Head Head Hex Key Order Diameter Length Size Depth Diameter Height Size Number

3/8” 10-24 3/16” 7/16” 1/8” 5/32" Z16001/2 10-24 5/16 7/16 1/8 5/32 Z16023/4 10-24 3/8 7/16 1/8 5/32 Z16041 10-24 3/8 7/16 1/8 5/32 Z1606

1-1/4 10-24 3/8 7/16 1/8 5/32 Z1608

1/2 1/4-20 3/8 21/32 3/16 7/32 Z16163/4 1/4-20 3/8 21/32 3/16 7/32 Z16181 1/4-20 3/8 21/32 3/16 7/32 Z1620

1/2 3/8-16 3/8 7/8 1/4 5/16 Z16305/8 3/8-16 3/8 7/8 1/4 5/16 Z16313/4 3/8-16 3/8 7/8 1/4 5/16 Z16327/8 3/8-16 3/8 7/8 1/4 5/16 Z16331 3/8-16 3/8 7/8 1/4 5/16 Z1634

1-1/2 3/8-16 3/8 7/8 1/4 5/16 Z17101-3/4 3/8-16 3/8 7/8 1/4 5/16 Z1712

2 3/8-16 3/8 7/8 1/4 5/16 Z17142-1/2 3/8-16 3/8 7/8 1/4 5/16 Z1716

3 3/8-16 3/8 7/8 1/4 5/16 Z1718

1/2 1/2-13 5/16 1" 5/16 3/8 Z17203/4 1/2-13 7/16 1" 5/16 3/8 Z17221 1/2-13 5/8 1" 5/16 3/8 Z1724

1-1/2 1/2-13 5/8 1" 5/16 3/8 Z17261-3/4 1/2-13 5/8 1" 5/16 3/8 Z1728

2 1/2-13 5/8 1" 5/16 3/8 Z18002-1/2 1/2-13 5/8 1" 5/16 3/8 Z1802

3 1/2-13 5/8 1" 5/16 3/8 Z1804

1/2 5/8-11 5/16 1-1/8 3/8 3/8 Z18063/4 5/8-11 7/16 1-1/8 3/8 3/8 Z18081 5/8-11 3/4 1-1/8 3/8 3/8 Z1810

1-1/2 5/8-11 3/4 1-1/8 3/8 3/8 Z18121-3/4 5/8-11 3/4 1-1/8 3/8 3/8 Z1814

2 5/8-11 3/4 1-1/8 3/8 3/8 Z18162-1/2 5/8-11 3/4 1-1/8 3/8 3/8 Z1818

3 5/8-11 3/4 1-1/8 3/8 3/8 Z1820

1/2 5/8-11 5/16 1-1/4 1/2 1/2 Z18223/4 5/8-11 7/16 1-1/4 1/2 1/2 Z18241 5/8-11 3/4 1-1/4 1/2 1/2 Z1826

1-1/2 5/8-11 3/4 1-1/4 1/2 1/2 Z18281-3/4 5/8-11 3/4 1-1/4 1/2 1/2 Z1830

2 5/8-11 3/4 1-1/4 1/2 1/2 Z18322-1/2 5/8-11 3/4 1-1/4 1/2 1/2 Z1834

3 5/8-11 3/4 1-1/4 1/2 1/2 Z1836

3/4

7/8

18-8 Stainless SteelButton Head Socket Drive—Female Barrels

1/4

3/8

1/2

5/8

NEWEXPANDEDLINE—LARGER SIZES NOW AVAILABLE

Button Head Socket Drive


USAShoulder Length Shoulder Thread Thread Head Head Hex Key Order Diameter Under Head Length Size Length Diameter Height Size Number

1/4" NONE 10-24 1/4" 7/16” 1/8” 5/32" Z18381/2 1/4 10-24 1/4 7/16 1/8 5/32 Z17681 1/2 10-24 1/2 7/16 1/8 5/32 Z1769

3/8 NONE 1/4-20 3/8 21/32 3/16 7/32 Z18403/4 1/4 1/4-20 1/2 21/32 3/16 7/32 Z16241 1/2 1/4-20 1/2 21/32 3/16 7/32 Z1770

1/2" NONE 3/8-16 1/2" 7/8 1/4 5/16 Z18421 1/2 3/8-16 1/2 7/8 1/4 5/16 Z1772

1-1/2 1 3/8-16 1/2 7/8 1/4 5/16 Z17742 1-1/2 3/8-16 1/2 7/8 1/4 5/16 Z1776

1/2" NONE 1/2-13 1/2" 1" 5/16 3/8 Z18441 1/2 1/2-13 1/2 1" 5/16 3/8 Z1778

1-1/2 1 1/2-13 1/2 1" 5/16 3/8 Z17802 1-1/2 1/2-13 1/2 1" 5/16 3/8 Z1782

1/2" NONE 5/8-11 1/2" 1-1/8 3/8 3/8 Z18461 1/2 5/8-11 1/2 1-1/8 3/8 3/8 Z1784

1-1/2 1 5/8-11 1/2 1-1/8 3/8 3/8 Z17862 1-1/2 5/8-11 1/2 1-1/8 3/8 3/8 Z1788

1/2" NONE 5/8-11 1/2" 1-1/4 3/8 3/8 Z18481 1/2 5/8-11 1/2 1-1/4 3/8 3/8 Z1790

1-1/2 1 5/8-11 1/2 1-1/4 3/8 3/8 Z17922 1-1/2 5/8-11 1/2 1-1/4 3/8 3/8 Z1794

7/8

1/2

18-8 Stainless SteelButton Head Socket Drive—Male Mating Screws

1/4

5/8

3/4

3/8


A8





THREADDEPTH

OVERALL LENGTH

BARREL DIAMETER

HEADDIAMETERHEAD HEIGHTTHREAD SIZE

82°

82 Degree Flat Head Socket Drive Barrel Bolts — Female18-8 Stainless Steel

Our 82° Flat Head Barrel Bolts are designed for use with countersunk holes, which allow the fasteners tosit � ush with the surface, providing a clean and � nished appearance. Made in the USA from Type 303 Stainless Steel which offers and excellent combination of strength and corrosion resistance.

Our standard size range is from 1/4" diameter x 3/8" length up to 7/8" diameter x 3" length. Specials are available in any size, call or email for a quote.

82° Flat Head Socket Drive Barrel Bolts


USA


AA8

A9




Barrel Overall Thread Thread Head Head Hex Key Order Diameter Length Size Depth Diameter Height Size Number

3/8” 10-24 3/16* 33/64” 11/64” 5/32" Z16401/2 10-24 5/16* 33/64 11/64 5/32 Z16423/4 10-24 3/8 33/64 11/64 5/32 Z16441 10-24 3/8 33/64 11/64 5/32 Z1646

1-1/4 10-24 3/8 33/64 11/64 5/32 Z1648

1/2 1/4-20 3/16* 3/4 15/64 7/32 Z16503/4 1/4-20 3/8 3/4 15/64 7/32 Z16521 1/4-20 3/8 3/4 15/64 7/32 Z1654

1/2 3/8-16 3/16* 7/8 1/4 5/16 Z16603/4 3/8-16 3/8 7/8 1/4 5/16 Z16621 3/8-16 1/2 7/8 1/4 5/16 Z1664

1-1/2 3/8-16 1/2 7/8 1/4 5/16 Z16651-3/4 3/8-16 1/2 7/8 1/4 5/16 Z1667

2 3/8-16 1/2 7/8 1/4 5/16 Z16692-1/2 3/8-16 1/2 7/8 1/4 5/16 Z1670

3 3/8-16 1/2 7/8 1/4 5/16 Z1671 1/2 1/2-13 1/4* 1" 1/4 3/8 Z16723/4 1/2-13 3/8 1" 1/4 3/8 Z16741 1/2-13 5/8 1" 1/4 3/8 Z1676

1-1/2 1/2-13 3/4 1" 1/4 3/8 Z16781-3/4 1/2-13 3/4 1" 1/4 3/8 Z1680

2 1/2-13 3/4 1" 1/4 3/8 Z16822-1/2 1/2-13 3/4 1" 1/4 3/8 Z1683

3 1/2-13 3/4 1" 1/4 3/8 Z1684

1/2 5/8-11 1/4* 1-1/8 1/4 3/8 Z16863/4 5/8-11 3/8 1-1/8 1/4 3/8 Z16881 5/8-11 5/8 1-1/8 1/4 3/8 Z1690

1-1/2 5/8-11 3/4 1-1/8 1/4 3/8 Z16921-3/4 5/8-11 3/4 1-1/8 1/4 3/8 Z1694

2 5/8-11 3/4 1-1/8 1/4 3/8 Z16962-1/2 5/8-11 3/4 1-1/8 1/4 3/8 Z1698

3 5/8-11 3/4 1-1/8 1/4 3/8 Z1699

1/2 5/8-11 1/4* 1-1/4 1/4 1/2 Z17003/4 5/8-11 3/8 1-1/4 1/4 1/2 Z17011 5/8-11 5/8 1-1/4 1/4 1/2 Z1702

1-1/2 5/8-11 3/4 1-1/4 1/4 1/2 Z17031-3/4 5/8-11 3/4 1-1/4 1/4 1/2 Z1704

2 5/8-11 3/4 1-1/4 1/4 1/2 Z17052-1/2 5/8-11 3/4 1-1/4 1/4 1/2 Z1706

3 5/8-11 3/4 1-1/4 1/4 1/2 Z1707* Open Head

3/4

7/8

18-8 Stainless Steel82° Flat Head Socket Drive—Female Barrels

1/4

3/8

1/2

5/8NEWEXPANDEDLINE—LARGER SIZES NOW AVAILABLE

82° Flat Head Socket Drive


USA

Thread Overall Thread Head Head Hex Key Order Size Length Length Diameter Height Size Number

3/8" 5/32" 33/64" 11/64" 5/32" Z17305/8 25/64 33/64 11/64 5/32 Z17321 49/64 33/64 11/64 5/32 Z1734

1/4-20 3/4 7/16 3/4 15/64 7/32 Z1736

3/4 3/8 7/8 1/4 5/16 Z17381-1/4 7/8 7/8 1/4 5/16 Z17401-3/4 1 7/8 1/4 5/16 Z1742

3/4 3/8 1" 1/4 3/8 Z17441-1/4 7/8 1" 1/4 3/8 Z17461-3/4 1 1" 1/4 3/8 Z1748 3/4 3/8 1-1/8 1/4 3/8 Z1750

1-1/4 7/8 1-1/8 1/4 3/8 Z17521-3/4 1 1-1/8 1/4 3/8 Z17543/4 3/8 1-1/4 1/4 1/2 Z1756

1-1/4 7/8 1-1/4 1/4 1/2 Z17581-3/4 1 1-1/4 1/4 1/2 Z1760

5/8-11

18-8 Stainless SteelFlat Head Socket Drive—Male Mating Screws

10-24

3/8-16

1/2-13


A10





Low Pro� le Head Socket Drive BoltsType 316 Stainless Steel

This line of matched head mating fasteners was developed for an Architect who required speci� c holding parameters in a low pro� le head that would blend into the project design. The heads of these low-pro� le barrel bolts are ideal in applications where material to be fastened is too thin to countersink; not allowing the use of countersunk screws. The large diameter heads of the low-pro� le barrel bolts were engineered to spread the load across a wide surface to provide greater holding power in thinner material applications. When looking for a mating fastener that can be more concealed than button and � at head style fasteners, low-pro� le head socket drive barrel bolts offer a sleek, unobtrusive and polished � nish for any design.

Low Pro� le Head Socket Drive Bolts


USA

SHOULDER LENGTH

HEAD DIA

HEX DRIVE SIZE

HEAD HEIGHT

SHOULDER DIA

THREAD SIZETHREAD LENGTH

SHOULDER LENGTH

HEAD DIA

HEX DRIVE SIZE

HEAD HEIGHT

SHOULDER DIA

THREAD SIZE

THREAD LENGTH

THREAD DEPTH


AA10

A11




Barrel Barrel Thread Thread Head Head Hex Key Order Diameter Length Size Depth Diameter Height Size Number

3/8” 10-24 3/16” 9/16” 3/32" 5/32" Z15081/2 10-24 5/16 9/16 3/32 5/32 Z15103/4 10-24 3/8 9/16 3/32 5/32 Z15121 10-24 3/8 9/16 3/32 5/32 Z1514

1-1/4 10-24 3/8 9/16 3/32 5/32 Z1516

1/2* 1/4-20 3/8* 25/32 3/32 7/32 Z15183/4 1/4-20 3/8 25/32 3/32 7/32 Z15201 1/4-20 3/8 25/32 3/32 7/32 Z1522

1/2* 3/8-16 3/8* 1 3/32 1/4 Z15243/4 3/8-16 3/8 1 3/32 1/4 Z15261 3/8-16 3/8 1 3/32 1/4 Z1528

1-1/2 3/8-16 3/8 1 3/32 1/4 Z15301-3/4 3/8-16 3/8 1 3/32 1/4 Z1532

2 3/8-16 3/8 1 3/32 1/4 Z15342-1/2 3/8-16 3/8 1 3/32 1/4 Z1536

3 3/8-16 3/8 1 3/32 1/4 Z1538

3/4 1/2-13 7/16 1-1/8 1/8 3/8 Z15421 1/2-13 5/8 1-1/8 1/8 3/8 Z1544

1-1/2 1/2-13 5/8 1-1/8 1/8 3/8 Z15461-3/4 1/2-13 5/8 1-1/8 1/8 3/8 Z1548

2 1/2-13 5/8 1-1/8 1/8 3/8 Z15502-1/2 1/2-13 5/8 1-1/8 1/8 3/8 Z1552

3 1/2-13 5/8 1-1/8 1/8 3/8 Z1554

3/4 5/8-11 7/16 1-3/8 1/8 3/8 Z15581 5/8-11 3/4 1-3/8 1/8 3/8 Z1560

1-1/2 5/8-11 3/4 1-3/8 1/8 3/8 Z15621-3/4 5/8-11 3/4 1-3/8 1/8 3/8 Z1564

2 5/8-11 3/4 1-3/8 1/8 3/8 Z15662-1/2 5/8-11 3/4 1-3/8 1/8 3/8 Z1568

3 5/8-11 3/4 1-3/8 1/8 3/8 Z1570

3/4 5/8-11 7/16 1-1/2 1/8 1/2 Z15741 5/8-11 3/4 1-1/2 1/8 1/2 Z1576

1-1/2 5/8-11 3/4 1-1/2 1/8 1/2 Z15781-3/4 5/8-11 3/4 1-1/2 1/8 1/2 Z1580

2 5/8-11 3/4 1-1/2 1/8 1/2 Z15822-1/2 5/8-11 3/4 1-1/2 1/8 1/2 Z1584

3 5/8-11 3/4 1-1/2 1/8 1/2 Z1586

3/4"

7/8"

Low-Profile Head Socket Drive—Female Barrels Type 316 SS

1/4"

3/8"

1/2"

5/8"

Low Pro� le Head Socket Drive Bolts


USA

Shoulder Length Shoulder Thread Thread Head Head Hex Key Order Diameter Under Head Length Size Length Diameter Height Size Number

1/4" NONE 10-24 1/4" 9/16” 3/32" 5/32" Z19001/2 1/4 10-24 1/4 9/16 3/32 5/32 Z19021 1/2 10-24 1/2 9/16 3/32 5/32 Z1904

3/8 NONE 1/4-20 3/8 25/32 3/32 7/32 Z19063/4 1/4 1/4-20 1/2 25/32 3/32 7/32 Z19081 1/2 1/4-20 1/2 25/32 3/32 7/32 Z1910

1/2 NONE 3/8-16 1/2 1 3/32 1/4 Z19121 1/2 3/8-16 1/2 1 3/32 1/4 Z1914

1-1/2 1 3/8-16 1/2 1 3/32 1/4 Z19162 1-1/2 3/8-16 1/2 1 3/32 1/4 Z1918

1/2 NONE 1/2-13 1/2 1-1/8 1/8 3/8 Z19201 1/2 1/2-13 1/2 1-1/8 1/8 3/8 Z1922

1-1/2 1 1/2-13 1/2 1-1/8 1/8 3/8 Z19242 1-1/2 1/2-13 1/2 1-1/8 1/8 3/8 Z1926

1/2 NONE 5/8-11 1/2 1-3/8 1/8 3/8 Z19281 1/2 5/8-11 1/2 1-3/8 1/8 3/8 Z1930

1-1/2 1 5/8-11 1/2 1-3/8 1/8 3/8 Z19322 1-1/2 5/8-11 1/2 1-3/8 1/8 3/8 Z1934

1/2 NONE 5/8-11 1/2 1-1/2 1/8 3/8 Z19361 1/2 5/8-11 1/2 1-1/2 1/8 3/8 Z1938

1-1/2 1 5/8-11 1/2 1-1/2 1/8 3/8 Z19402 1-1/2 5/8-11 1/2 1-1/2 1/8 3/8 Z1942

3/4"

7/8"

Low-Profile Head Socket Drive—Male Mating Screws Type 316 SS

1/4"

3/8"

1/2"

5/8"


A12





BOAT HULL

BOAT HULL

STANCHION BASEBOAT DECK

When joining two pieces of material together, Sex Bolts provide a versatile and stable fastener. The domed side is used in security applications, as there is no way to turn the smooth head of the Sex Bolt. A hole drilled thru the 2 materials being fastened is a safe and convenient method of joining. Our large selection of head styles, sizes, and materials makes for a custom look at an in-stock price and delivery.

This example shows a bulletproof glass installation at a bank. The sex bolts present a beautiful and finished look with a strong mechanical joint. The all metal joint protects the glass.

Marine applications are a common use for our 18-8 and Type 316 Stainless Steel Sex Bolts. Docks and construction projects in both fresh and salt water areas use these. Many boat manufacturers use these for attaching accessories both above and below the water line. Sex Bolts are particularly useful in fiberglass marine applications, as they take much of the stress away from the fiberglass.

Architectural Series Sex Bolts

See chart on facing page for available sizes and order numbers

Set

Female Bolt Only


AA12

A13




D B C A F E Set Female Barrel Barrel Thread Head Head Thread Mating Order Bolt

Diameter Length Depth Diameter Height Size Plating Screw Number Only1-3/16" 3/4" 9/16" 5/32" 1/4-20 None None — Z52141-7/8 3/4 9/16 5/32 1/4-20 Zinc None — Z5201

1-9/16 1 9/16 5/32 1/4-20 Zinc 1/4-20 x 1" Z5215 Z5215-1E1-9/16 1 9/16 5/32 1/4-20 Chrome 1/4-20 x 1-1/2 Z5216 Z5216-1E1-9/16 1 9/16 5/32 1/4-20 Brass 1/4-20 x 1-1/2 Z5217 Z5217-1E


Diameter Length Depth Diameter Height Size Plating Screw Number Only1-3/16" 5/8" 1/2" 1/8" 8-32 None 8-32 x 7/8" Z4876 Z4876-11-9/16 5/8 1/2 1/8 8-32 None 8-32 x 7/8 Z4886 Z4886-1

2 5/8 1/2 1/8 8-32 None 8-32 x 7/8 Z4889 Z4889-13 5/8 1/2 1/8 8-32 None 8-32 x 7/8 Z4890 Z4890-1

1-3/16 3/4 1/2 1/8 10-32 None 10-32 x 1 Z5025 Z5025-11-9/16 3/4 1/2 1/8 10-32 None 10-32 x 1 Z5125 Z5125-1

2 3/4 1/2 1/8 10-32 None 10-32 x 1 Z5126 Z5126-13 3/4 1/2 1/8 10-32 None 10-32 x 1 Z5127 Z5127-1

1-3/16 3/4 1/2 1/8 12-24 None 12-24 x 1 Z5128 Z5128-11-9/16 3/4 1/2 1/8 12-24 None 12-24 x 1 Z5129 Z5129-12-1/16 3/4 1/2 1/8 12-24 None 12-24 x 1 Z5130 Z5130-1

3/4” 1/2” 9/16” 5/32” 1/4-20 None 1/4-20 x 1 Z5140 Z5220-1

1 5/8 9/16 5/32 1/4-20 None 1/4-20 x 7/8 Z5221 Z5221-1 1-3/16 3/4 9/16 5/32 1/4-20 None 1/4-20 x 1 Z5142 Z52221-9/16 3/4 9/16 5/32 1/4-20 None 1/4-20 x 1 Z5225 Z5225-12-1/16 3/4 9/16 5/32 1/4-20 None 1/4-20 x 1 Z5325 Z5325-1

3 3/4 9/16 5/32 1/4-20 None 1/4-20 x 1-1/2 Z5326 Z5326-14 3/4 9/16 5/32 1/4-20 None 1/4-20 x 1-1/2 Z5327 Z5327-1

1-9/16 3/4 3/4 3/16 5/16-18 None 5/16-18 x 1 Z5234 Z5234-11-3/4 3/4 3/4 3/16 3/8-16 None 3/8-16 x 1 Z5235 Z5235-1

2-1/16 3/4 3/4 3/16 5/16-18 None 5/16-18 x 1-1/2 Z5425 Z5425-13 3/4 3/4 3/16 5/16-18 None 5/16-18 x 1-1/2 Z5426 Z5426-1


Diameter Length Depth Diameter Height Size Plating Screw Number Only1-3/16" 5/8" 1/2" 1/8" 8-32 None 8-32 x 3/4" Z5180 Z48771-9/16 5/8 1/2 1/8 8-32 None 8-32 x 3/4 Z5181 Z4885

2 5/8 1/2 1/8 8-32 None 8-32 x 3/4 Z5182 Z48933 5/8 1/2 1/8 8-32 None 8-32 x 3/4 Z5183 Z4894

1-3/16 3/4 1/2 1/8 10-32 None 10-32 x 1 Z5190 Z50241-9/16 3/4 1/2 1/8 10-32 None 10-32 x 1 Z5191 Z5124

2 3/4 1/2 1/8 10-32 None 10-32 x 1 Z5192 Z51313 3/4 1/2 1/8 10-32 None 10-32 x 1 Z5193 Z5132

3/4 1/2 9/16 5/32 1/4-20 None 1/4-20 x 1/2 Z5194 Z52191 5/8 9/16 5/32 1/4-20 None 1/4-20 x 1/2 Z5195 Z5223

1-3/16 3/4 9/16 5/32 1/4-20 None 1/4-20 x 1-1/2 Z5196 Z52241-9/16 3/4 9/16 5/32 1/4-20 None 1/4-20 x 1-1/2 Z5197 Z5197-12-1/16 3/4 9/16 5/32 1/4-20 None 1/4-20 x 1-1/2 Z5198 Z5198-1

3 3/4 9/16 5/32 1/4-20 None 1/4-20 x 1-1/2 Z5199 Z5199-1

2-1/16 3/4 3/4 3/16 5/16-18 None 5/16-18 x 1 Z5206 Z5206-13 3/4 3/4 3/16 5/16-18 None 5/16-18 x 1 Z5207 Z5207-1

5/8 3 1 1 1/4 1/2-13 None 1/2-13 x 1 — Z5209-1


Diameter Length Depth Diameter Height Size Plating Screw Number Only1-9/16 1 9/16 1/8 1/4-20 None 1/4-20 x 1 Z5218 Z5218-1A1-11/16 3/4 9/16 1/8 1/4-20 None 1/4-20 x 3/4 Z5250 Z5250-1

ALUMINUM MATERIAL

5/16

3/8

1/2

1/4

5/16

3/8

1/2

3/8

1/4

3/8

Architectural Series Sex Bolts STEEL MATERIAL

Architectural Series Sex Bolts 18-8 STAINLESS STEEL

Architectural Series Sex Bolts 316 STAINLESS STEEL


Mating Screws are Phillips Flat Head Machine Screws, Type 316 Stainless Steel

New Items in Red

*Mating Screws are Phillips Flat Head Machine Screws, 18-8 Stainless Steel



USA


A14





Socket Head Cap ScrewsLOW HEAD Socket Head Cap ScrewsAMPG® Precision Machined Socket Cap Screws are dimensionally more precise. Each screw is manufactured in one operation. We begin with precision-ground DFARS compliant raw materials, which is ordered with full traceabil-ity. On state of the art CNC Swiss Lathes, parts are made without any extra-handling or other machining operations. This ensures concentricity, tight tolerances, and a fastener easily recognized for uniformity & function.

Perfect for tight areas, low heads are about half the height of standard socket heads. All have a Class 3A thread � t. Screw length is measured from under the head. Note: Low head screws are not recommended for higher strength applications.

Head Head Hex Type 316 SS 17-4 PH Aluminum TitaniumThread Length Diameter Height Size Order Number Order Number Order Number Order Number

1/4 0.226" 0.072" 1/16" ZL60206C04 ZL74406C04 ZL72006C04 ZL70506C043/8 0.226" 0.072" 1/16" ZL60206C06 ZL74406C06 ZL72006C06 ZL70506C061/2 0.226" 0.072" 1/16" ZL60206C08 ZL74406C08 ZL72006C08 ZL70506C083/4 0.226" 0.072" 1/16" ZL60206C12 ZL74406C12 ZL72006C12 ZL70506C12

1/4 0.270" 0.085" 5/64" ZL60208C04 ZL74408C04 ZL72008C04 ZL70508C043/8 0.270" 0.085" 5/64" ZL60208C06 ZL74408C06 ZL72008C06 ZL70508C061/2 0.270" 0.085" 5/64" ZL60208C08 ZL74408C08 ZL72008C08 ZL70508C083/4 0.270" 0.085" 5/64" ZL60208C12 ZL74408C12 ZL72008C12 ZL70508C12

3/8 0.312" 0.098" 3/32" ZL60210F06 ZL74410F06 ZL72010F06 ZL70510F061/2 0.312" 0.098" 3/32" ZL60210F08 ZL74410F08 ZL72010F08 ZL70510F083/4 0.312" 0.098" 3/32" ZL60210F12 ZL74410F12 ZL72010F12 ZL70510F121 0.312" 0.098" 3/32" ZL60210F16 ZL74410F16 ZL72010F16 ZL70510F16

3/8 0.375" 0.127" 1/8" ZL60214C06 ZL74414C06 ZL72014C06 ZL70514C061/2 0.375" 0.127" 1/8" ZL60214C08 ZL74414C08 ZL72014C08 ZL70514C083/4 0.375" 0.127" 1/8" ZL60214C12 ZL74414C12 ZL72014C12 ZL70514C121 0.375" 0.127" 1/8" ZL60214C16 ZL74414C16 ZL72014C16 ZL70514C16

1/2 0.437" 0.158" 5/32" ZL60251C08 ZL74451C08 ZL72051C08 ZL70551C083/4 0.437" 0.158" 5/32" ZL60251C12 ZL74451C12 ZL72051C12 ZL70551C121 0.437" 0.158" 5/32" ZL60251C16 ZL74451C16 ZL72051C16 ZL70551C16

1 1/4 0.437" 0.158" 5/32" ZL60251C20 ZL74451C20 ZL72051C20 ZL70551C201 1/2 0.437" 0.158" 5/32" ZL60251C24 ZL74451C24 ZL72051C24 ZL70551C24

1/2 0.562" 0.192" 3/16" ZL60238C08 ZL74438C08 ZL72038C08 ZL70538C083/4 0.562" 0.192" 3/16" ZL60238C12 ZL74438C12 ZL72038C12 ZL70538C121 0.562" 0.192" 3/16" ZL60238C16 ZL74438C16 ZL72038C16 ZL70538C16

1 1/2 0.562" 0.192" 3/16" ZL60238C24 ZL74438C24 ZL72038C24 ZL70538C242 0.562" 0.192" 3/16" ZL60238C32 ZL74438C32 ZL72038C32 ZL70538C32

1/2 0.750" 0.254" 1/4" ZL60212C08 — — —3/4 0.750 0.254 1/4 ZL60212C12 — — —1 0.750 0.254 1/4 ZL60212C16 — — —

1-1/2 0.750 0.254 1/4 ZL60212C24 — — —2 0.750 0.254 1/4 ZL60212C32 — — —

1/2"-13

5/16-18

3/8-16

LOW HEAD Socket Head Cap Screws

10-32

1/4-20

6-32

8-32

THREADLENGTH

HEADDIAMETER

HEX SIZE

HEADHEIGHT

THREADSIZE

THESE SCREWS ARE ALLMADE IN

USA


AA14

A15




ULTRA LOW HEAD Socket Head Cap ScrewsExcellent for tight areas and fastening applications which will not accept a countersunk � at head screw. Ultra Low Head screws have reduced head heights about 1/3 less than the height of standard low head socket cap screws. A lower pro� le head reduces the chance of anything snagging on the head. In addition, all screw sizes are made with extra-wide heads that offer 33% more bearing surface and holding power than standard low head screws. The larger diameter head improves holding power especially when fastening lower strength materials. Made of corrosion-resistant Type 316 stainless steel. Material is DFARS compliant and traceable. Screws have a Class 2A thread � t. Length is measured from under the shoulder. The recommended installation hole size is equivalent to the shoulder diameter and assures the shoulder length sets below the surface when fastened. Low head screws are not recommended for high strength applications.

Thread Thread Shoulder Shoulder Head Head Hex Order Size Length Length Diameter Diameter Height Size Number

3/8" 1/16" 1/4" 13/32" 1/16" 3/32" ZUL60210F061/2 1/16 1/4 13/32 1/16 3/32 ZUL60210F083/4 1/16 1/4 13/32 1/16 3/32 ZUL60210F121 1/16 1/4 13/32 1/16 3/32 ZUL60210F16

3/8" 5/64" 5/16" 1/2" 5/64" 1/8" ZUL60214C061/2 5/64 5/16 1/2 5/64 1/8 ZUL60214C083/4 5/64 5/16 1/2 5/64 1/8 ZUL60214C121 5/64 5/16 1/2 5/64 1/8 ZUL60214C16

1-1/4 5/64 5/16 1/2 5/64 1/8 ZUL60214C201-1/2 5/64 5/16 1/2 5/64 1/8 ZUL60214C24

1/2" 7/64" 3/8" 37/64" 7/64" 5/32" ZUL60251C083/4 7/64 3/8 37/64 7/64 5/32 ZUL60251C121 7/64 3/8 37/64 7/64 5/32 ZUL60251C16

1-1/4 7/64 3/8 37/64 7/64 5/32 ZUL60251C201-1/2 7/64 3/8 37/64 7/64 5/32 ZUL60251C24

1/2" 1/8" 7/16" 3/4" 1/8" 3/16" ZUL60238C083/4 1/8 7/16 3/4 1/8 3/16 ZUL60238C121 1/8 7/16 3/4 1/8 3/16 ZUL60238C16

1-1/2 1/8 7/16 3/4 1/8 3/16 ZUL60238C242 1/8 7/16 3/4 1/8 3/16 ZUL60238C32

1/2" 11/64" 9/16" 1" 11/64" 1/4" ZUL60212C083/4 11/64 9/16 1 11/64 1/4 ZUL60212C121 11/64 9/16 1 11/64 1/4 ZUL60212C16

1-1/2 11/64 9/16 1 11/64 1/4 ZUL60212C242 11/64 9/16 1 11/64 1/4 ZUL60212C32

1/4-20

5/16-18

Ultra Low Head Socket Head Cap Screws—Type 316 SS

3/8-16

1/2-13

10-32

THESE SCREWS ARE ALLMADE IN

USA

THREADLENGTH

SHOULDERLENGTH HEAD

DIAMETER

HEX SIZE

HEADHEIGHT

THREADSIZE

Socket Head Cap Screws


A16





Head Head Hex Key 17-4 PH Aluminum TitaniumThread Length Diameter Height Size Order Number Order Number Order Number

1/8 0.140" 0.086" 5/64" ZS74402C02 ZS72002C02 ZS70502C023/16 0.140" 0.086" 5/64" ZS74402C03 ZS72002C03 ZS70502C031/4 0.140" 0.086" 5/64" ZS74402C04 ZS72002C04 ZS70502C04

5/16 0.140" 0.086" 5/64" ZS74402C05 ZS72002C05 ZS70502C053/8 0.140" 0.086" 5/64" ZS74402C06 ZS72002C06 ZS70502C061/2 0.140" 0.086" 5/64" ZS74402C08 ZS72002C08 ZS70502C08

3/16 0.183" 0.112" 3/32" ZS74404C03 ZS72004C03 ZS70504C031/4 0.183" 0.112" 3/32" ZS74404C04 ZS72004C04 ZS70504C04

5/16 0.183" 0.112" 3/32" ZS74404C05 ZS72004C05 ZS70504C053/8 0.183" 0.112" 3/32" ZS74404C06 ZS72004C06 ZS70504C061/2 0.183" 0.112" 3/32" ZS74404C08 ZS72004C08 ZS70504C085/8 0.183" 0.112" 3/32" ZS74404C10 ZS72004C10 ZS70504C103/4 0.183" 0.112" 3/32" ZS74404C12 ZS72004C12 ZS70504C12

1/4 0.226" 0.138" 7/64" ZS74406C04 ZS72006C04 ZS70506C045/16 0.226" 0.138" 7/64" ZS74406C05 ZS72006C05 ZS70506C053/8 0.226" 0.138" 7/64" ZS74406C06 ZS72006C06 ZS70506C061/2 0.226" 0.138" 7/64" ZS74406C08 ZS72006C08 ZS70506C085/8 0.226" 0.138" 7/64" ZS74406C10 ZS72006C10 ZS70506C103/4 0.226" 0.138" 7/64" ZS74406C12 ZS72006C12 ZS70506C121 0.226" 0.138" 7/64" ZS74406C16 ZS72006C16 ZS70506C16

1/4 0.270" 0.164" 9/64" ZS74408C04 ZS72008C04 ZS70508C043/8 0.270" 0.164" 9/64" ZS74408C06 ZS72008C06 ZS70508C061/2 0.270" 0.164" 9/64" ZS74408C08 ZS72008C08 ZS70508C085/8 0.270" 0.164" 9/64" ZS74408C10 ZS72008C10 ZS70508C103/4 0.270" 0.164" 9/64" ZS74408C12 ZS72008C12 ZS70508C121 0.270" 0.164" 9/64" ZS74408C16 ZS72008C16 ZS70508C16

1 1/4 0.270" 0.164" 9/64" ZS74408C20 ZS72008C20 ZS70508C20

1/4 0.312" 0.190" 5/32" ZS74410F04 ZS72010F04 ZS70510F043/8 0.312" 0.190" 5/32" ZS74410F06 ZS72010F06 ZS70510F061/2 0.312" 0.190" 5/32" ZS74410F08 ZS72010F08 ZS70510F085/8 0.312" 0.190" 5/32" ZS74410F10 ZS72010F10 ZS70510F103/4 0.312" 0.190" 5/32" ZS74410F12 ZS72010F12 ZS70510F121 0.312" 0.190" 5/32" ZS74410F16 ZS72010F16 ZS70510F16

1 1/4 0.312" 0.190" 5/32" ZS74410F20 ZS72010F20 ZS70510F201 1/2 0.312" 0.190" 5/32" ZS74410F24 ZS72010F24 ZS70510F24

3/8 3/8" 1/4" 3/16" ZS74414C06 ZS72014C06 ZS70514C061/2 3/8" 1/4" 3/16" ZS74414C08 ZS72014C08 ZS70514C085/8 3/8" 1/4" 3/16" ZS74414C10 ZS72014C10 ZS70514C103/4 3/8" 1/4" 3/16" ZS74414C12 ZS72014C12 ZS70514C121 3/8" 1/4" 3/16" ZS74414C16 ZS72014C16 ZS70514C16

1 1/4 3/8" 1/4" 3/16" ZS74414C20 ZS72014C20 ZS70514C201 1/2 3/8" 1/4" 3/16" ZS74414C24 ZS72014C24 ZS70514C24

1/2 15/32' 5/16" 1/4" ZS74451C08 ZS72031C08 ZS70551C085/8 15/32' 5/16" 1/4" ZS74451C10 ZS72031C10 ZS70551C103/4 15/32' 5/16" 1/4" ZS74451C12 ZS72031C12 ZS70551C127/8 15/32' 5/16" 1/4" ZS74451C14 ZS72031C14 ZS70551C141 15/32' 5/16" 1/4" ZS74451C16 ZS72031C16 ZS70551C16

1 1/4 15/32' 5/16" 1/4" ZS74451C20 ZS72031C20 ZS70551C201 1/2 15/32' 5/16" 1/4" ZS74451C24 ZS72031C24 ZS70551C24

2 15/32' 5/16" 1/4" ZS74451C32 ZS72031C32 ZS70551C32

3/4 9/16" 3/8" 5/16" ZS74438C12 ZS72038C12 ZS70538C127/8 9/16" 3/8" 5/16" ZS74438C14 ZS72038C14 ZS70538C141 9/16" 3/8" 5/16" ZS74438C16 ZS72038C16 ZS70538C16

1 1/4 9/16" 3/8" 5/16" ZS74438C20 ZS72038C20 ZS70538C201 1/2 9/16" 3/8" 5/16" ZS74438C24 ZS72038C24 ZS70538C24

1 3/4" 1/2" 3/8" ZS74412C16 ZS72012C16 ZS70512C161 1/4 3/4" 1/2" 3/8" ZS74412C20 ZS72012C20 ZS70512C201 1/2 3/4" 1/2" 3/8" ZS74412C24 ZS72012C24 ZS70512C24

2 3/4" 1/2" 3/8" ZS74412C32 ZS72012C32 ZS70512C323 3/4" 1/2" 3/8" ZS74412C48 ZS72012C48 ZS70512C48

5/16-18

3/8-16

1/2-13

Socket Head Cap Screws—EXOTICS

10-32

1/4-20

2-56

4-40

6-32

8-32

Socket Head Cap Screws—EXOTIC MATERIALAMPG® Precision Machined Socket Head Cap Screws are dimensionally more precise. Each screw is manufactured in one operation. We begin with precision-ground DFARS compliant raw materials, which is ordered with full trace-ability. On state of the art CNC Swiss Lathes, parts are made without any extra-handling or other machining opera-tions. This ensures concentricity, tight tolerances, and products easily recognized for their uniformity & function. Socket head cap screws have heavy heads with a hex socket drive. All screws have a Class 3A thread � t. Screw length is measured from top of head.



AA16

A17





Type 316 SS

Thread Overall Head Head Hex Key HeadSize Length Diameter Height Size Angle Part Number

3/8" 0.307" 0.056" 5/64" 100° ZHF60206C061/2 0.307 0.056 5/64 100° ZHF60206C083/4 0.307 0.056 5/64 100° ZHF60206C12

3/8" 0.359" 0.066" 5/64" 100° ZHF60208C061/2 0.359 0.066 5/64 100° ZHF60208C083/4 0.359 0.066 5/64 100° ZHF60208C12

1/2" 0.411" 0.074" 3/32" 100° ZHF60210F083/4 0.411 0.074 3/32 100° ZHF60210F121 0.411 0.074 3/32 100° ZHF60210F16

1/2" 0.531" 0.095" 1/8" 100° ZHF60214C083/4 0.531 0.095 1/8 100° ZHF60214C121 0.531 0.095 1/8 100° ZHF60214C16

1-1/4 0.531 0.095 1/8 100° ZHF60214C201-1/2 0.531 0.095 1/8 100° ZHF60214C24

3/4 0.656" 0.117" 5/32" 100° ZHF60251C121 0.656 0.117 5/32 100° ZHF60251C16

1-1/2 0.656 0.117 5/32 100° ZHF60251C245/16"-18

8-32

10-32

1/4"-20

6-32

100 Degree Flat Head Socket Cap Screws

100° FLAT HEAD Socket Cap ScrewsScrews are beveled 100° which provides a larger bearing surface to distribute holding force, these screws perform better than standard 82° � at head screws especially in softer materials. Designed for light fastening jobs where you need a � ush surface and corrosion resistance. All screws have a Class 3A thread � t, a Rockwell hardness of B70, and minimum tensile strength of 70,000 psi. Screw length is measured from the top of the head. Note: Flat head screws are not recommended for high strength applications.

HEX SIZE

HEAD DIAMETER

100°

THREAD SIZE

HEADHEIGHT

OVERALLLENGTH


ampg archcomp-sexbolts

Documents

keyt20 t

keyt27 t

lobe drive

head distortion

head dimensions

male bolts

order numbers truss

pin security screws