amphitheater high school fire alarm system replacement · amphitheater high school fire alarm...

Amphitheater School District

Amphitheater High School Fire Alarm System

Replacement

SFB Project No: 100210281-9999-018-BRG BG Project No: 15.20.02

Request for Bid No: 06-28-2017

Construction Document Specifications

April 2017

Amphitheater High School Fire Alarm System Replacement SPECIFICATIONS INDEX

Amphitheater High School Fire Alarm System Replacement TOC - 1 Project Number: 15.20.02 April 2017

DIVISION 1 – GENERAL REQUIREMENTS

SECTION 011000 SUMMARY

SECTION 012600 CONTRACT MODIFICATION PROCEDURES

SECTION 012900 PAYMENT PROCEDURES

SECTION 013100 PROJECT MANAGEMENT AND COORDINATION

SECTION 013200 CONSTRUCTION PROGRESS DOCUMENTATION

SECTION 013300 SUBMITTAL PROCEDURES

SECTION 014000 QUALITY REQUIREMENTS

SECTION 016000 PRODUCT REQUIREMENTS

SECTION 017300 EXECUTION REQUIREMENTS

SECTION 017700 CLOSEOUT PROCEDURES

SECTION 017823 OPERATION AND MAINTENANCE DATA

SECTION 017839 PROJECT RECORD DOCUMENTS

DIVISION 2 – EXISTING CONDITIONS

N/A

DIVISION 3 – CONCRETE

N/A

DIVISION 4 – MASONRY

N/A

DIVISION 5 – METALS

N/A

DIVISION 6 – WOOD, PLASTICS, AND COMPOSITES

N/A

DIVISION 7 – THERMAL AND MOISTURE PROTECTION

N/A

DIVISION 8 – OPENINGS

N/A

Amphitheater High School Fire Alarm System Replacement SPECIFICATIONS INDEX

Amphitheater High School Fire Alarm System Replacement TOC - 2 Project Number: 15.20.02 April 2017

DIVISION 9 – FINISHES

N/A

DIVISION 10 – SPECIALTIES

N/A

DIVISION 11 – EQUIPMENT

N/A

DIVISION 12 – FURNISHINGS

N/A

DIVISION 13 – SPECIAL CONSTRUCTION

N/A

DIVISION 14 – CONVEYING EQUIPMENT

N/A

DIVISION 21 – FIRE SUPPRESSION

N/A

DIVISION 22 – PLUMBING

N/A

DIVISION 23 – HEATING, VENTILATING, AND AIR CONDITIONING (HVAC)

N/A

DIVISION 26 – ELECTRICAL

SECTION 260500 ELECTRICAL

DIVISION 28 – ELECTRONIC SAFETY AND SECURITY

SECTION 281300 FIRE ALARM

DIVISION31 – EARTHWORK

N/A


Amphitheater High School Fire Alarm System Replacement 011000 - 1 Project Number: 15.20.02 April 2017

PART 1 - GENERAL

1.1 SUMMARY

A. Section Includes:

1. Project information. 2. Work covered by Contract Documents. 3. Access to site. 4. Coordination with occupants. 5. Work restrictions. 6. Specification and Drawing conventions.

1.2 PROJECT INFORMATION

A. Project Identification: Amphitheater High School Fire Alarm System Replacement.

1. Project Location: 125 W. Yavapai Road, Tucson, Arizona 86705.

B. Owner: Amphitheater Public Schools, 701 W. Wetmore Road, Tucson, Arizona 85705.

1. Owner's Representative: Pat Sledge.

C. Architect: Breckenridge Group Architects/Planners, 4625 E. Fort Lowell Road, Tucson, Arizona 85712.

1. Managing Principal: Klindt Breckenridge. 2. Project Manager: Shane Chism.

1.3 WORK COVERED BY CONTRACT DOCUMENTS

A. The Work of Project is defined by the Contract Documents and consists of the following:

1. Fire Alarm System Replacement:

a. Provide complete new Notifier main FACP which shall be addressable hardwired type system. New system shall provide emergency voice alarms to the building occupants. New system shall utilize existing fiber optic cables to provide network paths between the main FACP and remote FACPs in remote buildings. Remote FACPs provided in Auditorium, New Gym, CP-1 and Classroom buildings to provide sufficient addressable circuits and speaker circuits for total coverage of the Campus. Microphones for emergency paging provided in the Main Office FACP, Auditorium, New Gym and CP-1 remote FACPs.

b. Within each building existing devices, power supplies and wiring to be removed and replaced with new wiring compatible with the new system.

c. Existing wireless type initiation devices shall be removed. All existing wireless fire alarm equipment to be removed after new system is in-place and operational. New initiation devices shall be all hardwired, addressable type devices.



d. Existing notification appliances and remote power supplies shall be removed and replaced with new emergency voice alarm type notification devices. New visual alarm devices provided as part of the emergency voice alarm devices.

e. Replace existing SimplexGrinnell FACP in Auditorium building with new Notifier panel that is networked with the main FACP. All SimplexGrinnell devices in the building to be removed and replaced with Notifier compatible devices.

f. PE building existing Notifier FACP shall be networked with new FACP to integrate that panel into the system. Add voice alarm amplifier to the PE building panel and add voice alarm notification to the PE building.

g. New fire alarm system wiring to be in NEC approved conduit and EMT. h. Clean up and remove all debris caused by new fire alarm system construction. i. All other miscellaneous incidental work and coordination not shown that may be

required to complete the project.

B. Type of Contract:

1. Project will be constructed under a single prime contract.

1.4 ACCESS TO SITE

A. General: Contractor shall have limited use of Project site for construction operations as indicated on Drawings by the Contract limits and as indicated by requirements of this Section. The Project site will be used by staff and students throughout the project and improvements will be coordinated with the campus schedule.

B. Use of Site: Limit use of Project site to areas within the Contract limits indicated. Do not disturb portions of Project site beyond areas in which the Work is indicated.

1. Driveways, Walkways, and Entrances: Keep driveways and entrances serving premises clear and available to Owner, Owner's employees, and emergency vehicles at all times. Do not use these areas for parking or for storage of materials.

C. Condition of Existing Building: Maintain portions of existing building affected by construction operations in a weathertight condition throughout construction period. Repair damage caused by construction operations.

1.5 COORDINATION WITH OCCUPANTS

A. Full Owner Occupancy: Owner will occupy site and adjacent building(s) during entire construction period. Cooperate with Owner during construction operations to minimize conflicts and facilitate Owner usage. Perform the Work so as not to interfere with Owner's day-to-day operations. Maintain existing exits unless otherwise indicated.

B. Owner Limited Occupancy of Completed Areas of Construction: Owner reserves the right to occupy and to place and install equipment in completed portions of the Work, prior to Substantial Completion of the Work, provided such occupancy does not interfere with completion of the Work. Such placement of equipment and limited occupancy shall not constitute acceptance of the total Work.

1.6 WORK RESTRICTIONS

A. Work Restrictions, General: Comply with restrictions on construction operations.



1. Comply with limitations on use of public streets and with other requirements of authorities having jurisdiction.

B. On-Site Work Hours: Limit work in the existing building to normal business working hours of 6:00 a.m. to 5:00 p.m., Monday through Friday, unless otherwise indicated.

C. Existing Utility Interruptions: Do not interrupt utilities serving facilities occupied by Owner or others unless permitted under the following conditions and then only after providing temporary utility services according to requirements indicated:

1. Notify Owner not less than two days in advance of proposed utility interruptions. 2. Obtain Owner's written permission before proceeding with utility interruptions.

D. Restricted Substances: Use of tobacco products and other controlled substances on Project site is not permitted.

E. The contractor shall remember and remind its subcontractors that school will be in session during the construction period and proper behavior by all construction personnel is required. This shall include but not be limited to the following:

1. Inappropriate language is not tolerated at any time. 2. Starring at students and staff is considered inappropriate and shall be avoided.

Amphitheater Public School District policy adheres to the “Two Second Rule” which means, no vendors will look at (stare at) a student or staff member for more than two seconds.

3. Use of any school facilities including toilets, break areas, phones, computers, copiers / printers, office or classrooms, etcetera are not allowed at any time.

4. Contractor is responsible for protection of all furniture and equipment in occupied campus areas.

5. Any furniture that is moved or altered to perform work is to be replaced at the end of daily work shifts to its original position and condition.

6. The use of music radios when school is in session is prohibited.

F. Amphitheater Public Schools maintains a “zero tolerance policy” on these points of emphasis and any breach of this policy shall be grounds for removing the party from the project and at the sole discretion of the Amphitheater Public Schools District Staff.

1.7 SPECIFICATION AND DRAWING CONVENTIONS

A. Specification Content: The Specifications use certain conventions for the style of language and the intended meaning of certain terms, words, and phrases when used in particular situations. These conventions are as follows:

1. Imperative mood and streamlined language are generally used in the Specifications. The words "shall," "shall be," or "shall comply with," depending on the context, are implied where a colon (:) is used within a sentence or phrase.

2. Specification requirements are to be performed by Contractor unless specifically stated otherwise.

B. Division 01 General Requirements: Requirements of Sections in Division 01 apply to the Work of all Sections in the Specifications.



PART 2 - PRODUCTS (Not Used)

PART 3 - EXECUTION (Not Used)

END OF SECTION



PART 1 - GENERAL

1.1 SUMMARY

A. Section includes administrative and procedural requirements for handling and processing Contract modifications.

1.2 MINOR CHANGES IN THE WORK

A. Architect will issue supplemental instructions authorizing minor changes in the Work, not involving adjustment to the Contract Sum or the Contract Time, on AIA Document G710.

1.3 PROPOSAL REQUESTS

A. Owner-Initiated Proposal Requests: Architect will issue a detailed description of proposed changes in the Work that may require adjustment to the Contract Sum or the Contract Time. If necessary, the description will include supplemental or revised Drawings and Specifications.

1. Work Change Proposal Requests issued by Architect are not instructions either to stop work in progress or to execute the proposed change.

2. Within time specified in Proposal Request or 20 days, when not otherwise specified, after receipt of Proposal Request, submit a quotation estimating cost adjustments to the Contract Sum and the Contract Time necessary to execute the change.

a. Include a list of quantities of products required or eliminated and unit costs, with total amount of purchases and credits to be made. If requested, furnish survey data to substantiate quantities.

b. Indicate applicable taxes, delivery charges, equipment rental, and amounts of trade discounts.

c. Include costs of labor and supervision directly attributable to the change. d. Include an updated Contractor's construction schedule that indicates the effect of

the change, including, but not limited to, changes in activity duration, start and finish times, and activity relationship. Use available total float before requesting an extension of the Contract Time.

B. Contractor-Initiated Proposals: If latent or changed conditions require modifications to the Contract, Contractor may initiate a claim by submitting a request for a change to Architect.

1. Include a statement outlining reasons for the change and the effect of the change on the Work. Provide a complete description of the proposed change. Indicate the effect of the proposed change on the Contract Sum and the Contract Time.

2. Include a list of quantities of products required or eliminated and unit costs, with total amount of purchases and credits to be made. If requested, furnish survey data to substantiate quantities.

3. Indicate applicable taxes, delivery charges, equipment rental, and amounts of trade discounts.

4. Include costs of labor and supervision directly attributable to the change. 5. Include an updated Contractor's construction schedule that indicates the effect of the

change, including, but not limited to, changes in activity duration, start and finish times,



and activity relationship. Use available total float before requesting an extension of the Contract Time.

6. Comply with requirements in Section 012500 "Substitution Procedures" if the proposed change requires substitution of one product or system for product or system specified.

1.4 CHANGE ORDER PROCEDURES

A. On Owner's approval of a Work Change Proposal Request, Architect will issue a Change Order for signatures of Owner and Contractor on AIA Document G701.

1.5 CONSTRUCTION CHANGE DIRECTIVE

A. Construction Change Directive: Architect may issue a Construction Change Directive on AIA Document G714. Construction Change Directive instructs Contractor to proceed with a change in the Work, for subsequent inclusion in a Change Order.

1. Construction Change Directive contains a complete description of change in the Work. It also designates method to be followed to determine change in the Contract Sum or the Contract Time.

B. Documentation: Maintain detailed records on a time and material basis of work required by the Construction Change Directive.

1. After completion of change, submit an itemized account and supporting data necessary to substantiate cost and time adjustments to the Contract.



END OF SECTION



PART 1 - GENERAL

1.1 SUMMARY

A. Section includes administrative and procedural requirements necessary to prepare and process Applications for Payment.

1.2 SCHEDULE OF VALUES

A. Coordination: Coordinate preparation of the schedule of values with preparation of Contractor's construction schedule.

1. Coordinate line items in the schedule of values with items required to be indicated as separate activities in Contractor's construction schedule.

2. Submit the schedule of values to Architect at earliest possible date, but no later than seven days before the date scheduled for submittal of initial Applications for Payment.

B. Format and Content: Use Project Manual table of contents as a guide to establish line items for the schedule of values. Provide at least one line item for each Specification Section.

1. Arrange schedule of values consistent with format of AIA Document G703. 2. Provide a breakdown of the Contract Sum in enough detail to facilitate continued

evaluation of Applications for Payment and progress reports. Provide multiple line items for principal subcontract amounts in excess of five percent of the Contract Sum.

3. Provide a separate line item in the schedule of values for each part of the Work where Applications for Payment may include materials or equipment purchased or fabricated and stored, but not yet installed.

a. Differentiate between items stored on-site and items stored off-site.

4. Allowances: Provide a separate line item in the schedule of values for each allowance. Show line-item value of unit-cost allowances, as a product of the unit cost, multiplied by measured quantity. Use information indicated in the Contract Documents to determine quantities.

5. Overhead Costs: Include total cost and proportionate share of general overhead and profit for each line item.

6. Schedule of Values Revisions: Revise the schedule of values when Change Orders or Construction Change Directives result in a change in the Contract Sum. Include at least one separate line item for each Change Order and Construction Change Directive.

1.3 APPLICATIONS FOR PAYMENT

A. Each Application for Payment following the initial Application for Payment shall be consistent with previous applications and payments as certified by Architect and paid for by Owner.

B. Payment Application Times: The date for each progress payment is indicated in the Agreement between Owner and Contractor. The period of construction work covered by each Application for Payment is the period indicated in the Agreement.



1. Submit draft copy of Application for Payment seven days prior to due date for review by Architect.

C. Application for Payment Forms: Use AIA Document G702 and AIA Document G703 as form for Applications for Payment.

D. Application Preparation: Complete every entry on form. Notarize and execute by a person authorized to sign legal documents on behalf of Contractor. Architect will return incomplete applications without action.

1. Entries shall match data on the schedule of values and Contractor's construction schedule. Use updated schedules if revisions were made.

2. Include amounts for work completed following previous Application for Payment, whether or not payment has been received. Include only amounts for work completed at time of Application for Payment.

3. Include amounts of Change Orders and Construction Change Directives issued before last day of construction period covered by application.

E. Transmittal: Submit one signed and notarized original copies of each Application for Payment to Architect by a method ensuring receipt within 24 hours. One copy shall include waivers of lien and similar attachments if required.

1. Transmit each copy with a transmittal form listing attachments and recording appropriate information about application.

F. Waivers of Mechanic's Lien: With each Application for Payment, submit waivers of mechanic's lien from entities lawfully entitled to file a mechanic's lien arising out of the Contract and related to the Work covered by the payment.

1. Submit partial waivers on each item for amount requested in previous application, after deduction for retainage, on each item.

2. When an application shows completion of an item, submit conditional final or full waivers. 3. Owner reserves the right to designate which entities involved in the Work must submit

waivers. 4. Submit final Application for Payment with or preceded by conditional final waivers from

every entity involved with performance of the Work covered by the application who is lawfully entitled to a lien.

5. Waiver Forms: Submit executed waivers of lien on forms acceptable to Owner.

G. Initial Application for Payment: Administrative actions and submittals that must precede or coincide with submittal of first Application for Payment include the following:

1. List of subcontractors. 2. Schedule of values. 3. Contractor's construction schedule (preliminary if not final). 4. Submittal schedule (preliminary if not final). 5. Certificates of insurance and insurance policies. 6. Performance and payment bonds.

H. Application for Payment at Substantial Completion: After Architect issues the Certificate of Substantial Completion, submit an Application for Payment showing 100 percent completion for portion of the Work claimed as substantially complete.

1. Include documentation supporting claim that the Work is substantially complete and a statement showing an accounting of changes to the Contract Sum.



2. This application shall reflect Certificate(s) of Substantial Completion issued previously for Owner occupancy of designated portions of the Work.

I. Final Payment Application: After completing Project closeout requirements, submit final Application for Payment with releases and supporting documentation not previously submitted and accepted, including, but not limited, to the following:

1. Evidence of completion of Project closeout requirements. 2. Insurance certificates for products and completed operations where required and proof

that taxes, fees, and similar obligations were paid. 3. Updated final statement, accounting for final changes to the Contract Sum. 4. AIA Document G706. 5. AIA Document G706A. 6. Evidence that claims have been settled. 7. Final meter readings for utilities, a measured record of stored fuel, and similar data as of

date of Substantial Completion or when Owner took possession of and assumed responsibility for corresponding elements of the Work.

8. Final liquidated damages settlement statement.



END OF SECTION



PART 1 - GENERAL

1.1 RELATED DOCUMENTS

A. Drawings and general provisions of the Contract, including General and Supplementary Conditions and other Division 01 Specification Sections, apply to this Section.

1.2 SUMMARY

A. Section includes administrative provisions for coordinating construction operations on Project including, but not limited to, the following:

1. General coordination procedures. 2. RFIs. 3. Project meetings.

1.3 DEFINITIONS

A. RFI: Request for Information. Request from Owner, Architect, or Contractor seeking information required by or clarifications of the Contract Documents.

1.4 INFORMATIONAL SUBMITTALS

A. Subcontract List: Prepare a written summary identifying individuals or firms proposed for each portion of the Work, including those who are to furnish products or equipment fabricated to a special design. Include the following information in tabular form:

1. Name, address, telephone number, and email address of entity performing subcontract or supplying products.

2. Number and title of related Specification Section(s) covered by subcontract. 3. Drawing number and detail references, as appropriate, covered by subcontract.

1.5 GENERAL COORDINATION PROCEDURES

A. Coordination: Coordinate construction operations included in different Sections of the Specifications to ensure efficient and orderly installation of each part of the Work. Coordinate construction operations included in different Sections that depend on each other for proper installation, connection, and operation.

1. Schedule construction operations in sequence required to obtain the best results where installation of one part of the Work depends on installation of other components, before or after its own installation.

2. Coordinate installation of different components to ensure maximum performance and accessibility for required maintenance, service, and repair.

3. Make adequate provisions to accommodate items scheduled for later installation.



B. Administrative Procedures: Coordinate scheduling and timing of required administrative procedures with other construction activities to avoid conflicts and to ensure orderly progress of the Work. Such administrative activities include, but are not limited to, the following:

1. Preparation of Contractor's construction schedule. 2. Preparation of the schedule of values. 3. Installation and removal of temporary facilities and controls. 4. Delivery and processing of submittals. 5. Progress meetings. 6. Preinstallation conferences. 7. Project closeout activities. 8. Startup and adjustment of systems.

1.6 REQUEST FOR INFORMATION (RFI)

A. General: Immediately on discovery of the need for additional information, clarification, or interpretation of the Contract Documents, Contractor shall prepare and submit an RFI in the form specified.

1. Architect will return without response those RFIs submitted to Architect by other entities controlled by Contractor.

2. Coordinate and submit RFIs in a prompt manner so as to avoid delays in Contractor's work or work of subcontractors.

B. Content of the RFI: Include a detailed, legible description of item needing information or interpretation and the following:

1. Project name. 2. Project number. 3. Date. 4. Name of Contractor. 5. Name of Architect. 6. RFI number, numbered sequentially. 7. RFI subject. 8. Specification Section number and title and related paragraphs, as appropriate. 9. Drawing number and detail references, as appropriate. 10. Field dimensions and conditions, as appropriate. 11. Contractor's suggested resolution. If Contractor's suggested resolution impacts the

Contract Time or the Contract Sum, Contractor shall state impact in the RFI. 12. Contractor's signature. 13. Attachments: Include sketches, descriptions, measurements, photos, Product Data, Shop

Drawings, coordination drawings, and other information necessary to fully describe items needing interpretation.

C. RFI Forms: Software-generated form with substantially the same content as indicated above, acceptable to Architect.

D. Architect's Action: Architect will review each RFI, determine action required, and respond. Allow seven working days for Architect's response for each RFI. RFIs received by Architect after 1:00 p.m. will be considered as received the following working day.

1. The following Contractor-generated RFIs will be returned without action:

a. Requests for approval of submittals.



b. Requests for approval of substitutions. c. Requests for approval of Contractor's means and methods. d. Requests for coordination information already indicated in the Contract

Documents. e. Requests for adjustments in the Contract Time or the Contract Sum. f. Requests for interpretation of Architect's actions on submittals. g. Incomplete RFIs or inaccurately prepared RFIs.

2. Architect's action may include a request for additional information, in which case Architect's time for response will date from time of receipt by Architect additional information.

3. Architect's action on RFIs that may result in a change to the Contract Time or the Contract Sum may be eligible for Contractor to submit Change Proposal according to Section 012600 "Contract Modification Procedures."

a. If Contractor believes the RFI response warrants change in the Contract Time or the Contract Sum, notify Architect in writing within 10 days of receipt of the RFI response.

E. RFI Log: Prepare, maintain, and submit a tabular log of RFIs organized by the RFI number. Submit log weekly. Include the following:

1. Project name. 2. Name and address of Contractor. 3. Name and address of Architect. 4. RFI number including RFIs that were returned without action or withdrawn. 5. RFI description. 6. Date the RFI was submitted. 7. Date Architect's response was received.

F. On receipt of Architect's action, update the RFI log and immediately distribute the RFI response to affected parties. Review response and notify Architect within seven days if Contractor disagrees with response.

1.7 PROJECT MEETINGS

A. General: Schedule and conduct meetings and conferences at Project site unless otherwise indicated.

B. Preconstruction Conference: Architect will schedule and conduct a preconstruction conference before starting construction, at a time convenient to Owner and Architect, but no later than 15 days after execution of the Agreement.

1. Attendees: Authorized representatives of Owner, Architect, and their consultants; Contractor and its superintendent; major subcontractors; suppliers; and other concerned parties shall attend the conference. Participants at the conference shall be familiar with Project and authorized to conclude matters relating to the Work.

2. Agenda: Discuss items of significance that could affect progress, including the following:

a. Responsibilities and personnel assignments. b. Tentative construction schedule. c. Critical work sequencing and long lead items. d. Designation of key personnel and their duties. e. Lines of communications.



f. Procedures for processing field decisions and Change Orders. g. Procedures for RFIs. h. Procedures for testing and inspecting. i. Procedures for processing Applications for Payment. j. Distribution of the Contract Documents. k. Submittal procedures. l. Preparation of Record Documents. m. Use of the premises and existing building. n. Work restrictions. o. Working hours. p. Owner's occupancy requirements. q. Responsibility for temporary facilities and controls. r. Procedures for moisture and mold control. s. Procedures for disruptions and shutdowns. t. Construction waste management and recycling. u. Parking availability. v. Office, work, and storage areas. w. Equipment deliveries and priorities. x. First aid. y. Security. z. Progress cleaning.

3. Minutes: Entity responsible for conducting meeting will record and distribute meeting minutes.

C. Preinstallation Conferences: Conduct a preinstallation conference at Project site before each construction activity when required by other sections and when required for coordination with other construction.

1. Attendees: Installer and representatives of manufacturers and fabricators involved in or affected by the installation and its coordination or integration with other materials and installations that have preceded or will follow, shall attend the meeting. Advise Architect of scheduled meeting dates.

2. Agenda: Review progress of other construction activities and preparations for the particular activity under consideration, including requirements for the following:

a. Contract Documents. b. Options. c. Related RFIs. d. Related Change Orders. e. Purchases. f. Deliveries. g. Submittals. h. Possible conflicts. i. Compatibility requirements. j. Time schedules. k. Weather limitations. l. Manufacturer's written instructions. m. Warranty requirements. n. Compatibility of materials. o. Acceptability of substrates. p. Temporary facilities and controls. q. Space and access limitations. r. Testing and inspecting requirements. s. Installation procedures. t. Coordination with other work.



u. Required performance results. v. Protection of adjacent work. w. Protection of construction and personnel.

3. Record significant conference discussions, agreements, and disagreements, including required corrective measures and actions.

4. Reporting: Distribute minutes of the meeting to each party present and to other parties requiring information.

5. Do not proceed with installation if the conference cannot be successfully concluded. Initiate whatever actions are necessary to resolve impediments to performance of the Work and reconvene the conference at earliest feasible date.

D. Progress Meetings: Conduct progress meetings at regular intervals or as requested by Owner.

1. Coordinate dates of meetings with preparation of payment requests. 2. Attendees: In addition to representatives of Owner and Architect, each contractor,

subcontractor, supplier, and other entity concerned with current progress or involved in planning, coordination, or performance of future activities shall be represented at these meetings. All participants at the meeting shall be familiar with Project and authorized to conclude matters relating to the Work.

3. Agenda: Review and correct or approve minutes of previous progress meeting. Review other items of significance that could affect progress. Include topics for discussion as appropriate to status of Project.

a. Contractor's Construction Schedule: Review progress since the last meeting. Determine whether each activity is on time, ahead of schedule, or behind schedule, in relation to Contractor's construction schedule. Determine how construction behind schedule will be expedited; secure commitments from parties involved to do so. Discuss whether schedule revisions are required to ensure that current and subsequent activities will be completed within the Contract Time.

1) Review schedule for next period.

b. Review present and future needs of each entity present, including the following:

1) Interface requirements. 2) Sequence of operations. 3) Status of submittals. 4) Deliveries. 5) Off-site fabrication. 6) Access. 7) Site use. 8) Temporary facilities and controls. 9) Progress cleaning. 10) Quality and work standards. 11) Status of correction of deficient items. 12) Field observations. 13) Status of RFIs. 14) Status of Proposal Requests. 15) Pending changes. 16) Status of Change Orders. 17) Pending claims and disputes. 18) Documentation of information for payment requests.

4. Minutes: Entity responsible for conducting the meeting will record and distribute the meeting minutes to each party present and to parties requiring information.



a. Schedule Updating: Revise Contractor's construction schedule after each progress meeting where revisions to the schedule have been made or recognized. Issue revised schedule concurrently with the report of each meeting.



END OF SECTION



PART 1 - GENERAL

1.1 SUMMARY

A. Section includes administrative and procedural requirements for documenting the progress of construction during performance of the Work, including the following:

1. Contractor's Construction Schedule. 2. Construction schedule updating reports. 3. Site condition reports.


A. Format for Submittals: Submit required submittals in the following format:

1. Working electronic copy of schedule file, where indicated. 2. PDF file.

B. Contractor's Construction Schedule: Initial schedule, of size required to display entire schedule for entire construction period.

C. Construction Schedule Updating Reports: Submit with Applications for Payment.

1.3 COORDINATION

A. Coordinate Contractor's Construction Schedule with the schedule of values, list of subcontracts, submittal schedule, progress reports, payment requests, and other required schedules and reports.

1. Secure time commitments for performing critical elements of the Work from entities involved.

2. Coordinate each construction activity in the network with other activities and schedule them in proper sequence.

1.4 CONTRACTOR'S CONSTRUCTION SCHEDULE, GENERAL

A. Computer Scheduling Software: Prepare schedules using current version of a program that has been developed specifically to manage construction schedules.

B. Time Frame: Extend schedule from date established for the Notice to Proceed to date of Substantial Completion.

1. Contract completion date shall not be changed by submission of a schedule that shows an early completion date, unless specifically authorized by Change Order.

C. Activities: Treat each floor or separate area as a separate numbered activity for each main element of the Work. Comply with the following:



1. Activity Duration: Define activities so no activity is longer than 20 days, unless specifically allowed by Architect.

2. Procurement Activities: Include procurement process activities for long lead items and major items as separate activities in schedule. Procurement cycle activities include, but are not limited to, submittals, approvals, purchasing, fabrication, and delivery.

3. Submittal Review Time: Include review and resubmittal times indicated in Section 013300 "Submittal Procedures" in schedule. Coordinate submittal review times in Contractor's Construction Schedule with submittal schedule.

4. Substantial Completion: Indicate completion in advance of date established for Substantial Completion, and allow time for Architect's administrative procedures necessary for certification of Substantial Completion.

5. Punch List and Final Completion: Include not more than 30 days for completion of punch list items and final completion.

D. Constraints: Include constraints and work restrictions indicated in the Contract Documents and as follows in schedule, and show how the sequence of the Work is affected.

1. Phasing: Arrange list of activities on schedule by phase. 2. Work Restrictions: Show the effect of the following items on the schedule:

a. Coordination with existing construction. b. Limitations of continued occupancies. c. Uninterruptible services. d. Partial occupancy before Substantial Completion. e. Use-of-premises restrictions. f. Provisions for future construction. g. Seasonal variations. h. Environmental control.

E. Milestones: Include milestones indicated in the Contract Documents in schedule, including, but not limited to, the Notice to Proceed, Substantial Completion, and final completion.

F. Upcoming Work Summary: Prepare summary report indicating activities scheduled to occur or commence prior to submittal of next schedule update. Summarize the following issues:

1. Unresolved issues. 2. Unanswered Requests for Information. 3. Rejected or unreturned submittals. 4. Notations on returned submittals. 5. Pending modifications affecting the Work and the Contract Time.

G. Contractor's Construction Schedule Updating: At monthly intervals, update schedule to reflect actual construction progress and activities. Issue schedule one week before each regularly scheduled progress meeting.

1. Revise schedule immediately after each meeting or other activity where revisions have been recognized or made. Issue updated schedule concurrently with the report of each such meeting.

2. Include a report with updated schedule that indicates every change, including, but not limited to, changes in logic, durations, actual starts and finishes, and activity durations.

3. As the Work progresses, indicate final completion percentage for each activity.

H. Recovery Schedule: When periodic update indicates the Work is 14 or more calendar days behind the current approved schedule, submit a separate recovery schedule indicating means by which Contractor intends to regain compliance with the schedule. Indicate changes to



working hours, working days, crew sizes, equipment required to achieve compliance, and date by which recovery will be accomplished.

I. Distribution: Distribute copies of approved schedule to Architect, Owner, separate contractors, testing and inspecting agencies, and other parties identified by Contractor with a need-to-know schedule responsibility.

1. Post copies in Project meeting rooms and temporary field offices. 2. When revisions are made, distribute updated schedules to the same parties and post in

the same locations. Delete parties from distribution when they have completed their assigned portion of the Work and are no longer involved in performance of construction activities.

1.5 GANTT-CHART SCHEDULE REQUIREMENTS

A. Gantt-Chart Schedule: Submit a comprehensive, fully developed, horizontal, Gantt-chart-type, Contractor's Construction Schedule within 30 days of date established for the Notice to Proceed.

B. Preparation: Indicate each significant construction activity separately. Identify first workday of each week with a continuous vertical line.

1.6 REPORTS

A. Site Condition Reports: Immediately on discovery of a difference between site conditions and the Contract Documents, prepare and submit a detailed report. Submit with a Request for Information. Include a detailed description of the differing conditions, together with recommendations for changing the Contract Documents.



END OF SECTION



PART 1 - GENERAL

1.1 SUMMARY

A. Section Includes:

1. Submittal schedule requirements. 2. Administrative and procedural requirements for submittals.

1.2 DEFINITIONS

A. Action Submittals: Written and graphic information and physical samples that require Architect's responsive action. Action submittals are those submittals indicated in individual Specification Sections as "action submittals."

B. Informational Submittals: Written and graphic information and physical samples that do not require Architect's responsive action. Submittals may be rejected for not complying with requirements. Informational submittals are those submittals indicated in individual Specification Sections as "informational submittals."

1.3 SUBMITTAL SCHEDULE

A. Submittal Schedule: Submit, as an action submittal, a list of submittals, arranged in chronological order by dates required by construction schedule. Include time required for review, ordering, manufacturing, fabrication, and delivery when establishing dates. Include additional time required for making corrections or revisions to submittals noted by Architect and additional time for handling and reviewing submittals required by those corrections.

1.4 SUBMITTAL FORMATS

A. Submittal Information: Include the following information in each submittal:

1. Project name. 2. Date. 3. Name of Architect. 4. Name of Contractor. 5. Names of subcontractor, manufacturer, and supplier. 6. Unique submittal number, including revision identifier. Include Specification Section

number with sequential alphanumeric identifier; and alphanumeric suffix for resubmittals. 7. Number and title of Specification Section, with paragraph number and generic name for

each of multiple items. 8. Drawing number and detail references, as appropriate. 9. Indication of full or partial submittal. 10. Location(s) where product is to be installed, as appropriate. 11. Other necessary identification. 12. Remarks. 13. Signature of transmitter.

B. Options: Identify options requiring selection by Architect.



C. Deviations and Additional Information: On each submittal, clearly indicate deviations from requirements in the Contract Documents, including minor variations and limitations; include relevant additional information and revisions, other than those requested by Architect on previous submittals. Indicate by highlighting on each submittal or noting on attached separate sheet.

D. PDF Submittals: Prepare submittals as PDF package, incorporating complete information into each PDF file. Name PDF file with submittal number.

1.5 SUBMITTAL PROCEDURES

A. Prepare and submit submittals required by individual Specification Sections. Types of submittals are indicated in individual Specification Sections.

1. Email: Prepare submittals as PDF package, and transmit to Architect by sending via email. Include PDF transmittal form. Include information in email subject line as requested by Architect.

B. Coordination: Coordinate preparation and processing of submittals with performance of construction activities.

1. Coordinate each submittal with fabrication, purchasing, testing, delivery, other submittals, and related activities that require sequential activity.

2. Submit all submittal items required for each Specification Section concurrently unless partial submittals for portions of the Work are indicated on approved submittal schedule.

3. Submit action submittals and informational submittals required by the same Specification Section as separate packages under separate transmittals.

C. Processing Time: Allow time for submittal review, including time for resubmittals, as follows. Time for review shall commence on Architect's receipt of submittal. No extension of the Contract Time will be authorized because of failure to transmit submittals enough in advance of the Work to permit processing, including resubmittals.

1. Initial Review: Allow 15 days for initial review of each submittal. Allow additional time if coordination with subsequent submittals is required. Architect will advise Contractor when a submittal being processed must be delayed for coordination.

2. Resubmittal Review: Allow 15 days for review of each resubmittal.

D. Resubmittals: Make resubmittals in same form and number of copies as initial submittal.

E. Distribution: Furnish copies of final submittals to manufacturers, subcontractors, suppliers, fabricators, installers, authorities having jurisdiction, and others as necessary for performance of construction activities. Show distribution on transmittal forms.

F. Use for Construction: Retain complete copies of submittals on Project site. Use only final action submittals that are marked with approval notation from Architect's action stamp.

1.6 SUBMITTAL REQUIREMENTS

A. Product Data: Collect information into a single submittal for each element of construction and type of product or equipment.



1. If information must be specially prepared for submittal because standard published data are unsuitable for use, submit as Shop Drawings, not as Product Data.

2. Mark each copy of each submittal to show which products and options are applicable. 3. Include the following information, as applicable:

a. Manufacturer's catalog cuts. b. Manufacturer's product specifications. c. Standard color charts. d. Statement of compliance with specified referenced standards. e. Testing by recognized testing agency. f. Application of testing agency labels and seals. g. Notation of coordination requirements. h. Availability and delivery time information.

4. For equipment, include the following in addition to the above, as applicable:

a. Wiring diagrams that show factory-installed wiring. b. Printed performance curves. c. Operational range diagrams. d. Clearances required to other construction, if not indicated on accompanying Shop

Drawings.

B. Samples: Submit Samples for review of kind, color, pattern, and texture for a check of these characteristics with other materials.

1. Transmit Samples that contain multiple, related components such as accessories together in one submittal package.

2. Identification: Permanently attach label on unexposed side of Samples that includes the following:

a. Project name and submittal number. b. Generic description of Sample. c. Product name and name of manufacturer. d. Sample source. e. Number and title of applicable Specification Section. f. Specification paragraph number and generic name of each item.

3. Email Transmittal: Provide PDF transmittal. Include digital image file illustrating Sample characteristics, and identification information for record.

4. Paper Transmittal: Include paper transmittal including complete submittal information indicated.

5. Disposition: Maintain sets of approved Samples at Project site, available for quality-control comparisons throughout the course of construction activity. Sample sets may be used to determine final acceptance of construction associated with each set.

a. Samples that may be incorporated into the Work are indicated in individual Specification Sections. Such Samples must be in an undamaged condition at time of use.

b. Samples not incorporated into the Work, or otherwise designated as Owner's property, are the property of Contractor.

6. Samples for Initial Selection: Submit manufacturer's color charts consisting of units or sections of units showing the full range of colors, textures, and patterns available.



a. Number of Samples: Submit one full set(s) of available choices where color, pattern, texture, or similar characteristics are required to be selected from manufacturer's product line. Architect will return submittal with options selected.

C. Qualification Data: Prepare written information that demonstrates capabilities and experience of firm or person. Include lists of completed projects with project names and addresses, contact information of architects and owners, and other information specified.

D. Certificates:

1. Certificates and Certifications Submittals: Submit a statement that includes signature of entity responsible for preparing certification. Certificates and certifications shall be signed by an officer or other individual authorized to sign documents on behalf of that entity. Provide a notarized signature where indicated.

2. Installer Certificates: Submit written statements on manufacturer's letterhead certifying that Installer complies with requirements in the Contract Documents and, where required, is authorized by manufacturer for this specific Project.

3. Manufacturer Certificates: Submit written statements on manufacturer's letterhead certifying that manufacturer complies with requirements in the Contract Documents. Include evidence of manufacturing experience where required.

4. Material Certificates: Submit written statements on manufacturer's letterhead certifying that material complies with requirements in the Contract Documents.

5. Product Certificates: Submit written statements on manufacturer's letterhead certifying that product complies with requirements in the Contract Documents.

E. Test and Research Reports:

1. Compatibility Test Reports: Submit reports written by a qualified testing agency, on testing agency's standard form, indicating and interpreting results of compatibility tests performed before installation of product. Include written recommendations for primers and substrate preparation needed for adhesion.

2. Field Test Reports: Submit written reports indicating and interpreting results of field tests performed either during installation of product or after product is installed in its final location, for compliance with requirements in the Contract Documents.

3. Material Test Reports: Submit reports written by a qualified testing agency, on testing agency's standard form, indicating and interpreting test results of material for compliance with requirements in the Contract Documents.

4. Preconstruction Test Reports: Submit reports written by a qualified testing agency, on testing agency's standard form, indicating and interpreting results of tests performed before installation of product, for compliance with performance requirements in the Contract Documents.

5. Product Test Reports: Submit written reports indicating that current product produced by manufacturer complies with requirements in the Contract Documents. Base reports on evaluation of tests performed by manufacturer and witnessed by a qualified testing agency, or on comprehensive tests performed by a qualified testing agency.

6. Research Reports: Submit written evidence, from a model code organization acceptable to authorities having jurisdiction, that product complies with building code in effect for Project. Include the following information:

a. Name of evaluation organization. b. Date of evaluation. c. Time period when report is in effect. d. Product and manufacturers' names. e. Description of product. f. Test procedures and results. g. Limitations of use.



1.7 CONTRACTOR'S REVIEW

A. Action Submittals and Informational Submittals: Review each submittal and check for coordination with other Work of the Contract and for compliance with the Contract Documents. Note corrections and field dimensions. Mark with approval stamp before submitting to Architect.

B. Contractor's Approval: Indicate Contractor's approval for each submittal with a uniform approval stamp. Include name of reviewer, date of Contractor's approval, and statement certifying that submittal has been reviewed, checked, and approved for compliance with the Contract Documents.

1. Architect will not review submittals received from Contractor that do not have Contractor's review and approval.

1.8 ARCHITECT'S REVIEW

A. Action Submittals: Architect will review each submittal, indicate corrections or revisions required, and return it.

1. PDF Submittals: Architect will indicate, via markup on each submittal, the appropriate action.

2. Paper Submittals: Architect will stamp each submittal with an action stamp and will mark stamp appropriately to indicate action.

B. Informational Submittals: Architect will review each submittal and will not return it, or will return it if it does not comply with requirements. Architect will forward each submittal to appropriate party.

C. Partial submittals prepared for a portion of the Work will be reviewed when use of partial submittals has received prior approval from Architect.

D. Incomplete submittals are unacceptable, will be considered nonresponsive, and will be returned for resubmittal without review.

E. Architect will discard submittals received from sources other than Contractor.

F. Submittals not required by the Contract Documents will be returned by Architect without action.



END OF SECTION



PART 1 - GENERAL

1.1 SUMMARY

A. Section includes administrative and procedural requirements for quality assurance and quality control.

B. Testing and inspection services are required to verify compliance with requirements specified or indicated. These services do not relieve Contractor of responsibility for compliance with the Contract Document requirements.

1. Specified tests, inspections, and related actions do not limit Contractor's other quality-assurance and quality-control procedures that facilitate compliance with the Contract Document requirements.

2. Requirements for Contractor to provide quality-assurance and quality-control services required by Architect, Owner, or authorities having jurisdiction are not limited by provisions of this Section.

1.2 DEFINITIONS

A. Experienced: When used with an entity or individual, "experienced" unless otherwise further described means having successfully completed a minimum of five previous projects similar in nature, size, and extent to this Project; being familiar with special requirements indicated; and having complied with requirements of authorities having jurisdiction.

B. Field Quality-Control Tests: Tests and inspections that are performed on-site for installation of the Work and for completed Work.

C. Installer/Applicator/Erector: Contractor or another entity engaged by Contractor as an employee, Subcontractor, or Sub-subcontractor, to perform a particular construction operation, including installation, erection, application, assembly, and similar operations.

1. Use of trade-specific terminology in referring to a trade or entity does not require that certain construction activities be performed by accredited or unionized individuals, or that requirements specified apply exclusively to specific trade(s).

D. Preconstruction Testing: Tests and inspections performed specifically for Project before products and materials are incorporated into the Work, to verify performance or compliance with specified criteria.

E. Product Tests: Tests and inspections that are performed by a nationally recognized testing laboratory (NRTL) according to 29 CFR 1910.7, by a testing agency accredited according to NIST's National Voluntary Laboratory Accreditation Program (NVLAP), or by a testing agency qualified to conduct product testing and acceptable to authorities having jurisdiction, to establish product performance and compliance with specified requirements.

F. Source Quality-Control Tests: Tests and inspections that are performed at the source; for example, plant, mill, factory, or shop.

G. Testing Agency: An entity engaged to perform specific tests, inspections, or both. Testing laboratory shall mean the same as testing agency.



H. Quality-Assurance Services: Activities, actions, and procedures performed before and during execution of the Work to guard against defects and deficiencies and substantiate that proposed construction will comply with requirements.

I. Quality-Control Services: Tests, inspections, procedures, and related actions during and after execution of the Work to evaluate that actual products incorporated into the Work and completed construction comply with requirements. Contractor's quality-control services do not include contract administration activities performed by Architect.

1.3 CONFLICTING REQUIREMENTS

A. Conflicting Standards and Other Requirements: If compliance with two or more standards or requirements are specified and the standards or requirements establish different or conflicting requirements for minimum quantities or quality levels, comply with the most stringent requirement. Refer conflicting requirements that are different, but apparently equal, to Architect for direction before proceeding.

B. Minimum Quantity or Quality Levels: The quantity or quality level shown or specified shall be the minimum provided or performed. The actual installation may comply exactly with the minimum quantity or quality specified, or it may exceed the minimum within reasonable limits. To comply with these requirements, indicated numeric values are minimum or maximum, as appropriate, for the context of requirements. Refer uncertainties to Architect for a decision before proceeding.


A. Contractor's Statement of Responsibility: When required by authorities having jurisdiction, submit copy of written statement of responsibility submitted to authorities having jurisdiction before starting work on the following systems:

1. Seismic-force-resisting system, designated seismic system, or component listed in the Statement of Special Inspections.

2. Main wind-force-resisting system or a wind-resisting component listed in the Statement of Special Inspections.

B. Testing Agency Qualifications: For testing agencies specified in "Quality Assurance" Article to demonstrate their capabilities and experience. Include proof of qualifications in the form of a recent report on the inspection of the testing agency by a recognized authority.

C. Permits, Licenses, and Certificates: For Owner's record, submit copies of permits, licenses, certifications, inspection reports, releases, jurisdictional settlements, notices, receipts for fee payments, judgments, correspondence, records, and similar documents established for compliance with standards and regulations bearing on performance of the Work.

1.5 REPORTS AND DOCUMENTS

A. Test and Inspection Reports: Prepare and submit certified written reports specified in other Sections. Include the following:

1. Date of issue. 2. Project title and number. 3. Name, address, telephone number, and email address of testing agency.



4. Dates and locations of samples and tests or inspections. 5. Names of individuals making tests and inspections. 6. Description of the Work and test and inspection method. 7. Identification of product and Specification Section. 8. Complete test or inspection data. 9. Test and inspection results and an interpretation of test results. 10. Record of temperature and weather conditions at time of sample taking and testing and

inspection. 11. Comments or professional opinion on whether tested or inspected Work complies with

the Contract Document requirements. 12. Name and signature of laboratory inspector. 13. Recommendations on retesting and reinspecting.

B. Manufacturer's Technical Representative's Field Reports: Prepare written information documenting manufacturer's technical representative's tests and inspections specified in other Sections. Include the following:

1. Statement on condition of substrates and their acceptability for installation of product. 2. Statement that products at Project site comply with requirements. 3. Summary of installation procedures being followed, whether they comply with

requirements and, if not, what corrective action was taken. 4. Results of operational and other tests and a statement of whether observed performance

complies with requirements. 5. Other required items indicated in individual Specification Sections.

1.6 QUALITY ASSURANCE

A. General: Qualifications paragraphs in this article establish the minimum qualification levels required; individual Specification Sections specify additional requirements.

B. Manufacturer Qualifications: A firm experienced in manufacturing products or systems similar to those indicated for this Project and with a record of successful in-service performance, as well as sufficient production capacity to produce required units. As applicable, procure products from manufacturers able to meet qualification requirements, warranty requirements, and technical or factory-authorized service representative requirements.

C. Fabricator Qualifications: A firm experienced in producing products similar to those indicated for this Project and with a record of successful in-service performance, as well as sufficient production capacity to produce required units.

D. Installer Qualifications: A firm or individual experienced in installing, erecting, applying, or assembling work similar in material, design, and extent to that indicated for this Project, whose work has resulted in construction with a record of successful in-service performance.

E. Manufacturer's Technical Representative Qualifications: An authorized representative of manufacturer who is trained and approved by manufacturer to observe and inspect installation of manufacturer's products that are similar in material, design, and extent to those indicated for this Project.

1.7 QUALITY CONTROL

A. Owner Responsibilities: Where quality-control services are indicated as Owner's responsibility, Owner will engage a qualified testing agency to perform these services.



1. Costs for retesting and reinspecting construction that replaces or is necessitated by work that failed to comply with the Contract Documents will be charged to Contractor.

B. Contractor Responsibilities: Tests and inspections not explicitly assigned to Owner are Contractor's responsibility. Perform additional quality-control activities, whether specified or not, to verify and document that the Work complies with requirements.

1. Engage a qualified testing agency to perform quality-control services.

a. Contractor shall not employ same entity engaged by Owner, unless agreed to in writing by Owner.

2. Notify testing agencies at least 24 hours in advance of time when Work that requires testing or inspection will be performed.

3. Where quality-control services are indicated as Contractor's responsibility, submit a certified written report, in duplicate, of each quality-control service.

4. Testing and inspection requested by Contractor and not required by the Contract Documents are Contractor's responsibility.

5. Submit additional copies of each written report directly to authorities having jurisdiction, when they so direct.

C. Retesting/Reinspecting: Regardless of whether original tests or inspections were Contractor's responsibility, provide quality-control services, including retesting and reinspecting, for construction that replaced Work that failed to comply with the Contract Documents.

D. Testing Agency Responsibilities: Cooperate with Architect and Contractor in performance of duties. Provide qualified personnel to perform required tests and inspections.

1. Notify Architect and Contractor promptly of irregularities or deficiencies observed in the Work during performance of its services.

2. Determine the locations from which test samples will be taken and in which in-situ tests are conducted.

3. Conduct and interpret tests and inspections and state in each report whether tested and inspected work complies with or deviates from requirements.

4. Submit a certified written report, in duplicate, of each test, inspection, and similar quality-control service through Contractor.

5. Do not release, revoke, alter, or increase the Contract Document requirements or approve or accept any portion of the Work.

6. Do not perform duties of Contractor.

E. Manufacturer's Technical Services: Where indicated, engage a manufacturer's technical representative to observe and inspect the Work. Manufacturer's technical representative's services include participation in preinstallation conferences, examination of substrates and conditions, verification of materials, observation of Installer activities, inspection of completed portions of the Work, and submittal of written reports.

F. Associated Contractor Services: Cooperate with agencies and representatives performing required tests, inspections, and similar quality-control services, and provide reasonable auxiliary services as requested. Notify agency sufficiently in advance of operations to permit assignment of personnel. Provide the following:

1. Access to the Work. 2. Incidental labor and facilities necessary to facilitate tests and inspections. 3. Adequate quantities of representative samples of materials that require testing and

inspection. Assist agency in obtaining samples.



4. Facilities for storage and field curing of test samples. 5. Preliminary design mix proposed for use for material mixes that require control by testing

agency. 6. Security and protection for samples and for testing and inspection equipment at Project

site.

G. Coordination: Coordinate sequence of activities to accommodate required quality-assurance and quality-control services with a minimum of delay and to avoid necessity of removing and replacing construction to accommodate testing and inspection.

1. Schedule times for tests, inspections, obtaining samples, and similar activities.


PART 3 - EXECUTION

3.1 TEST AND INSPECTION LOG

A. Test and Inspection Log: Prepare a record of tests and inspections. Include the following:

1. Date test or inspection was conducted. 2. Description of the Work tested or inspected. 3. Date test or inspection results were transmitted to Architect. 4. Identification of testing agency or special inspector conducting test or inspection.

B. Maintain log at Project site. Post changes and revisions as they occur. Provide access to test and inspection log for Architect's reference during normal working hours.

1. Submit log at Project closeout as part of Project Record Documents.

3.2 REPAIR AND PROTECTION

A. General: On completion of testing, inspection, sample taking, and similar services, repair damaged construction and restore substrates and finishes.

1. Provide materials and comply with installation requirements specified in other Specification Sections or matching existing substrates and finishes. Restore patched areas and extend restoration into adjoining areas with durable seams that are as invisible as possible. Comply with the Contract Document requirements for cutting and patching in Section 017300 "Execution."

B. Protect construction exposed by or for quality-control service activities.

C. Repair and protection are Contractor's responsibility, regardless of the assignment of responsibility for quality-control services.

END OF SECTION



PART 1 - GENERAL

1.1 SUMMARY

A. Section includes administrative and procedural requirements for selection of products for use in Project; product delivery, storage, and handling; manufacturers' standard warranties on products; special warranties; and comparable products.

1.2 DEFINITIONS

A. Products: Items obtained for incorporating into the Work, whether purchased for Project or taken from previously purchased stock. The term "product" includes the terms "material," "equipment," "system," and terms of similar intent.

1. Named Products: Items identified by manufacturer's product name, including make or model number or other designation shown or listed in manufacturer's published product literature that is current as of date of the Contract Documents.

2. New Products: Items that have not previously been incorporated into another project or facility. Products salvaged or recycled from other projects are not considered new products.

3. Comparable Product: Product that is demonstrated and approved by Architect through submittal process to have the indicated qualities related to type, function, dimension, in-service performance, physical properties, appearance, and other characteristics that equal or exceed those of specified product.

B. Basis-of-Design Product Specification: A specification in which a single manufacturer's product is named and accompanied by the words "basis-of-design product," including make or model number or other designation. In addition to the basis-of-design product description, product attributes and characteristics may be listed to establish the significant qualities related to type, function, in-service performance and physical properties, weight, dimension, durability, visual characteristics, and other special features and requirements for purposes of evaluating comparable products of additional manufacturers named in the specification.

1.3 ACTION SUBMITTALS

A. Comparable Product Request Submittal: Submit request for consideration of each comparable product. Identify basis-of-design product or fabrication or installation method to be replaced. Include Specification Section number and title and Drawing numbers and titles.

1. Include data to indicate compliance with the requirements specified in "Comparable Products" Article.

2. Architect's Action: If necessary, Architect will request additional information or documentation for evaluation within seven days of receipt of a comparable product request. Architect will notify Contractor of approval or rejection of proposed comparable product request within 15 days of receipt of request, or seven days of receipt of additional information or documentation, whichever is later.

a. Form of Architect's Approval of Submittal: As specified in Section 013300 "Submittal Procedures."



b. Use product specified if Architect does not issue a decision on use of a comparable product request within time allocated.

B. Basis-of-Design Product Specification Submittal: Comply with requirements in Section 013300 "Submittal Procedures." Show compliance with requirements.


A. Compatibility of Options: If Contractor is given option of selecting between two or more products for use on Project, select product compatible with products previously selected, even if previously selected products were also options.

1.5 PRODUCT DELIVERY, STORAGE, AND HANDLING

A. Deliver, store, and handle products using means and methods that will prevent damage, deterioration, and loss, including theft and vandalism. Comply with manufacturer's written instructions.

B. Delivery and Handling:

1. Schedule delivery to minimize long-term storage at Project site and to prevent overcrowding of construction spaces.

2. Coordinate delivery with installation time to ensure minimum holding time for items that are flammable, hazardous, easily damaged, or sensitive to deterioration, theft, and other losses.

3. Deliver products to Project site in an undamaged condition in manufacturer's original sealed container or other packaging system, complete with labels and instructions for handling, storing, unpacking, protecting, and installing.

4. Inspect products on delivery to determine compliance with the Contract Documents and to determine that products are undamaged and properly protected.

C. Storage:

1. Store products to allow for inspection and measurement of quantity or counting of units. 2. Store materials in a manner that will not endanger Project structure. 3. Store products that are subject to damage by the elements, under cover in a weathertight

enclosure above ground, with ventilation adequate to prevent condensation. 4. Protect foam plastic from exposure to sunlight, except to extent necessary for period of

installation and concealment. 5. Comply with product manufacturer's written instructions for temperature, humidity,

ventilation, and weather-protection requirements for storage. 6. Protect stored products from damage and liquids from freezing.

1.6 PRODUCT WARRANTIES

A. Warranties specified in other Sections shall be in addition to, and run concurrent with, other warranties required by the Contract Documents. Manufacturer's disclaimers and limitations on product warranties do not relieve Contractor of obligations under requirements of the Contract Documents.

1. Manufacturer's Warranty: Written warranty furnished by individual manufacturer for a particular product and specifically endorsed by manufacturer to Owner.



2. Special Warranty: Written warranty required by the Contract Documents to provide specific rights for Owner.

B. Special Warranties: Prepare a written document that contains appropriate terms and identification, ready for execution.

1. Manufacturer's Standard Form: Modified to include Project-specific information and properly executed.

2. Specified Form: When specified forms are included with the Specifications, prepare a written document using indicated form properly executed.

3. See other Sections for specific content requirements and particular requirements for submitting special warranties.

PART 2 - PRODUCTS

2.1 PRODUCT SELECTION PROCEDURES

A. General Product Requirements: Provide products that comply with the Contract Documents, are undamaged and, unless otherwise indicated, are new at time of installation.

1. Provide products complete with accessories, trim, finish, fasteners, and other items needed for a complete installation and indicated use and effect.

2. Standard Products: If available, and unless custom products or nonstandard options are specified, provide standard products of types that have been produced and used successfully in similar situations on other projects.

3. Owner reserves the right to limit selection to products with warranties meeting requirements of the Contract Documents.

4. Where products are accompanied by the term "as selected," Architect will make selection.

5. Descriptive, performance, and reference standard requirements in the Specifications establish salient characteristics of products.

B. Product Selection Procedures:

1. Sole Product: Where Specifications name a single manufacturer and product, provide the named product that complies with requirements. Comparable products or substitutions for Contractor's convenience will not be considered.

a. Sole product may be indicated by the phrase: "Subject to compliance with requirements, provide the following: …"

2. Sole Manufacturer/Source: Where Specifications name a single manufacturer or source, provide a product by the named manufacturer or source that complies with requirements. Comparable products or substitutions for Contractor's convenience will not be considered.

a. Sole manufacturer/source may be indicated by the phrase: "Subject to compliance with requirements, provide products by the following: …"

3. Limited List of Products: Where Specifications include a list of names of both manufacturers and products, provide one of the products listed that complies with requirements. Comparable products or substitutions for Contractor's convenience will not be considered.



a. Limited list of products may be indicated by the phrase: "Subject to compliance with requirements, provide one of the following: …"

4. Non-Limited List of Products: Where Specifications include a list of names of both available manufacturers and products, provide one of the products listed, or an unnamed product, which complies with requirements.

a. Non-limited list of products is indicated by the phrase: "Subject to compliance with requirements, available products that may be incorporated in the Work include, but are not limited to, the following: …"

5. Limited List of Manufacturers: Where Specifications include a list of manufacturers' names, provide a product by one of the manufacturers listed that complies with requirements. Comparable products or substitutions for Contractor's convenience will not be considered.

a. Limited list of manufacturers is indicated by the phrase: "Subject to compliance with requirements, provide products by one of the following: …"

6. Non-Limited List of Manufacturers: Where Specifications include a list of available manufacturers, provide a product by one of the manufacturers listed, or a product by an unnamed manufacturer, which complies with requirements.

a. Non-limited list of manufacturers is indicated by the phrase: "Subject to compliance with requirements, available manufacturers whose products may be incorporated in the Work include, but are not limited to, the following: …"

7. Basis-of-Design Product: Where Specifications name a product, or refer to a product indicated on Drawings, and include a list of manufacturers, provide the specified or indicated product or a comparable product by one of the other named manufacturers. Drawings and Specifications indicate sizes, profiles, dimensions, and other characteristics that are based on the product named. Comply with requirements in "Comparable Products" Article for consideration of an unnamed product by one of the other named manufacturers.

C. Visual Matching Specification: Where Specifications require "match Architect's sample," provide a product that complies with requirements and matches Architect's sample. Architect's decision will be final on whether a proposed product matches.

1. If no product available within specified category matches and complies with other specified requirements, comply with requirements in Section 012500 "Substitution Procedures" for proposal of product.

D. Visual Selection Specification: Where Specifications include the phrase "as selected by Architect from manufacturer's full range" or similar phrase, select a product that complies with requirements. Architect will select color, gloss, pattern, density, or texture from manufacturer's product line that includes both standard and premium items.

2.2 COMPARABLE PRODUCTS

A. Conditions for Consideration of Comparable Products: Architect will consider Contractor's request for comparable product when the following conditions are satisfied. If the following conditions are not satisfied, Architect may return requests without action, except to record noncompliance with these requirements:



1. Evidence that proposed product does not require revisions to the Contract Documents, is consistent with the Contract Documents, will produce the indicated results, and is compatible with other portions of the Work. Detailed comparison of significant qualities of proposed product with those named in the Specifications. Significant product qualities include attributes such as type, function, in-service performance and physical properties, weight, dimension, durability, visual characteristics, and other specific features and requirements.

2. Evidence that proposed product provides specified warranty. 3. List of similar installations for completed projects with project names and addresses and

names and addresses of architects and owners, if requested. 4. Samples, if requested.


END OF SECTION

SECTION 017300 EXECUTION


PART 1 - GENERAL

1.1 SUMMARY

A. Section includes general administrative and procedural requirements governing execution of the Work including, but not limited to, the following:

1. Installation of the Work. 2. Cutting and patching. 3. Progress cleaning. 4. Protection of installed construction.


A. Cutting and Patching: Comply with requirements for and limitations on cutting and patching of construction elements.

1. Structural Elements: When cutting and patching structural elements, notify Architect of locations and details of cutting and await directions from Architect before proceeding. Shore, brace, and support structural elements during cutting and patching. Do not cut and patch structural elements in a manner that could change their load-carrying capacity or increase deflection.

2. Operational Elements: Do not cut and patch operating elements and related components in a manner that results in reducing their capacity to perform as intended or that results in increased maintenance or decreased operational life or safety.

3. Other Construction Elements: Do not cut and patch other construction elements or components in a manner that could change their load-carrying capacity, that results in reducing their capacity to perform as intended, or that results in increased maintenance or decreased operational life or safety.

4. Visual Elements: Do not cut and patch construction in a manner that results in visual evidence of cutting and patching. Do not cut and patch exposed construction in a manner that would, in Architect's opinion, reduce the building's aesthetic qualities. Remove and replace construction that has been cut and patched in a visually unsatisfactory manner.

B. Manufacturer's Installation Instructions: Obtain and maintain on-site manufacturer's written recommendations and instructions for installation of products and equipment.

PART 2 - PRODUCTS

2.1 MATERIALS

A. General: Comply with requirements specified in other Sections.

1. For projects requiring compliance with sustainable design and construction practices and procedures, use products for patching that comply with sustainable design requirements.

B. In-Place Materials: Use materials for patching identical to in-place materials. For exposed surfaces, use materials that visually match in-place adjacent surfaces to the fullest extent possible.



1. If identical materials are unavailable or cannot be used, use materials that, when installed, will provide a match acceptable to Architect for the visual and functional performance of in-place materials.

PART 3 - EXECUTION

3.1 EXAMINATION

A. Existing Conditions: The existence and location of underground and other utilities and construction indicated as existing are not guaranteed. Before beginning sitework, investigate and verify the existence and location of underground utilities, mechanical and electrical systems, and other construction affecting the Work.

1. Before construction, verify the location and invert elevation at points of connection of sanitary sewer, storm sewer, and water-service piping; underground electrical services; and other utilities.

2. Furnish location data for work related to Project that must be performed by public utilities serving Project site.

B. Examination and Acceptance of Conditions: Before proceeding with each component of the Work, examine substrates, areas, and conditions, with Installer or Applicator present where indicated, for compliance with requirements for installation tolerances and other conditions affecting performance. Record observations.

1. Examine roughing-in for mechanical and electrical systems to verify actual locations of connections before equipment and fixture installation.

2. Examine walls, floors, and roofs for suitable conditions where products and systems are to be installed.

3. Verify compatibility with and suitability of substrates, including compatibility with existing finishes or primers.

C. Proceed with installation only after unsatisfactory conditions have been corrected. Proceeding with the Work indicates acceptance of surfaces and conditions.

3.2 PREPARATION

A. Existing Utility Information: Furnish information to local utility that is necessary to adjust, move, or relocate existing utility structures, utility poles, lines, services, or other utility appurtenances located in or affected by construction. Coordinate with authorities having jurisdiction.

B. Field Measurements: Take field measurements as required to fit the Work properly. Recheck measurements before installing each product. Where portions of the Work are indicated to fit to other construction, verify dimensions of other construction by field measurements before fabrication. Coordinate fabrication schedule with construction progress to avoid delaying the Work.

C. Space Requirements: Verify space requirements and dimensions of items shown diagrammatically on Drawings.

D. Review of Contract Documents and Field Conditions: Immediately on discovery of the need for clarification of the Contract Documents caused by differing field conditions outside the control of



Contractor, submit a request for information to Architect according to requirements in Section 013100 "Project Management and Coordination."

3.3 INSTALLATION

A. General: Locate the Work and components of the Work accurately, in correct alignment and elevation, as indicated.

1. Make vertical work plumb and make horizontal work level. 2. Where space is limited, install components to maximize space available for maintenance

and ease of removal for replacement. 3. Conceal pipes, ducts, and wiring in finished areas unless otherwise indicated.

B. Comply with manufacturer's written instructions and recommendations for installing products in applications indicated.

C. Install products at the time and under conditions that will ensure the best possible results. Maintain conditions required for product performance until Substantial Completion.

D. Conduct construction operations so no part of the Work is subjected to damaging operations or loading in excess of that expected during normal conditions of occupancy.

E. Sequence the Work and allow adequate clearances to accommodate movement of construction items on site and placement in permanent locations.

F. Tools and Equipment: Where possible, select tools or equipment that minimize production of excessive noise levels.

G. Templates: Obtain and distribute to the parties involved templates for work specified to be factory prepared and field installed. Check Shop Drawings of other portions of the Work to confirm that adequate provisions are made for locating and installing products to comply with indicated requirements.

H. Attachment: Provide blocking and attachment plates and anchors and fasteners of adequate size and number to securely anchor each component in place, accurately located and aligned with other portions of the Work. Where size and type of attachments are not indicated, verify size and type required for load conditions.

1. Mounting Heights: Where mounting heights are not indicated, mount components at heights directed by Architect.

2. Allow for building movement, including thermal expansion and contraction. 3. Coordinate installation of anchorages. Furnish setting drawings, templates, and directions

for installing anchorages, including sleeves, concrete inserts, anchor bolts, and items with integral anchors, that are to be embedded in concrete or masonry. Deliver such items to Project site in time for installation.

I. Joints: Make joints of uniform width. Where joint locations in exposed work are not indicated, arrange joints for the best visual effect. Fit exposed connections together to form hairline joints.

J. Remove and replace damaged, defective, or non-conforming Work.



3.4 CUTTING AND PATCHING

A. Cutting and Patching, General: Employ skilled workers to perform cutting and patching. Proceed with cutting and patching at the earliest feasible time, and complete without delay.

1. Cut in-place construction to provide for installation of other components or performance of other construction, and subsequently patch as required to restore surfaces to their original condition.

B. Existing Warranties: Remove, replace, patch, and repair materials and surfaces cut or damaged during installation or cutting and patching operations, by methods and with materials so as not to void existing warranties.

C. Temporary Support: Provide temporary support of work to be cut.

D. Protection: Protect in-place construction during cutting and patching to prevent damage. Provide protection from adverse weather conditions for portions of Project that might be exposed during cutting and patching operations.

E. Adjacent Occupied Areas: Where interference with use of adjoining areas or interruption of free passage to adjoining areas is unavoidable, coordinate cutting and patching according to requirements in Section 011000 "Summary."

F. Existing Utility Services and Mechanical/Electrical Systems: Where existing services/systems are required to be removed, relocated, or abandoned, bypass such services/systems before cutting to minimize interruption to occupied areas.

G. Cutting: Cut in-place construction by sawing, drilling, breaking, chipping, grinding, and similar operations, including excavation, using methods least likely to damage elements retained or adjoining construction. If possible, review proposed procedures with original Installer; comply with original Installer's written recommendations.

1. In general, use hand or small power tools designed for sawing and grinding, not hammering and chopping. Cut holes and slots neatly to minimum size required, and with minimum disturbance of adjacent surfaces. Temporarily cover openings when not in use.

2. Finished Surfaces: Cut or drill from the exposed or finished side into concealed surfaces. 3. Concrete and Masonry: Cut using a cutting machine, such as an abrasive saw or a

diamond-core drill. 4. Excavating and Backfilling: Comply with requirements in applicable Sections where

required by cutting and patching operations. 5. Mechanical and Electrical Services: Cut off pipe or conduit in walls or partitions to be

removed. Cap, valve, or plug and seal remaining portion of pipe or conduit to prevent entrance of moisture or other foreign matter after cutting.

6. Proceed with patching after construction operations requiring cutting are complete.

H. Patching: Patch construction by filling, repairing, refinishing, closing up, and similar operations following performance of other work. Patch with durable seams that are as invisible as practicable. Provide materials and comply with installation requirements specified in other Sections, where applicable.

1. Inspection: Where feasible, test and inspect patched areas after completion to demonstrate physical integrity of installation.

2. Exposed Finishes: Restore exposed finishes of patched areas and extend finish restoration into retained adjoining construction in a manner that will minimize evidence of patching and refinishing.



3. Floors and Walls: Where walls or partitions that are removed extend one finished area into another, patch and repair floor and wall surfaces in the new space. Provide an even surface of uniform finish, color, texture, and appearance. Remove in-place floor and wall coverings and replace with new materials, if necessary, to achieve uniform color and appearance.

4. Ceilings: Patch, repair, or rehang in-place ceilings as necessary to provide an even-plane surface of uniform appearance.

5. Exterior Building Enclosure: Patch components in a manner that restores enclosure to a weathertight condition and ensures thermal and moisture integrity of building enclosure.

I. Cleaning: Clean areas and spaces where cutting and patching are performed. Remove paint, mortar, oils, putty, and similar materials from adjacent finished surfaces.

3.5 PROGRESS CLEANING

A. General: Clean Project site and work areas daily, including common areas. Enforce requirements strictly. Dispose of materials lawfully.

1. Comply with requirements in NFPA 241 for removal of combustible waste materials and debris.

2. Do not hold waste materials more than seven days during normal weather or three days if the temperature is expected to rise above 80 deg F.

3. Containerize hazardous and unsanitary waste materials separately from other waste. Mark containers appropriately and dispose of legally, according to regulations.

a. Use containers intended for holding waste materials of type to be stored.

4. Coordinate progress cleaning for joint-use areas where Contractor and other contractors are working concurrently.

B. Site: Maintain Project site free of waste materials and debris.

C. Work Areas: Clean areas where work is in progress to the level of cleanliness necessary for proper execution of the Work.

1. Remove liquid spills promptly. 2. Where dust would impair proper execution of the Work, broom-clean or vacuum the

entire work area, as appropriate.

D. Installed Work: Keep installed work clean. Clean installed surfaces according to written instructions of manufacturer or fabricator of product installed, using only cleaning materials specifically recommended. If specific cleaning materials are not recommended, use cleaning materials that are not hazardous to health or property and that will not damage exposed surfaces.

E. Concealed Spaces: Remove debris from concealed spaces before enclosing the space.

F. Exposed Surfaces in Finished Areas: Clean exposed surfaces and protect as necessary to ensure freedom from damage and deterioration at time of Substantial Completion.

G. Waste Disposal: Do not bury or burn waste materials on-site. Do not wash waste materials down sewers or into waterways.



H. During handling and installation, clean and protect construction in progress and adjoining materials already in place. Apply protective covering where required to ensure protection from damage or deterioration at Substantial Completion.

I. Clean and provide maintenance on completed construction as frequently as necessary through the remainder of the construction period. Adjust and lubricate operable components to ensure operability without damaging effects.

J. Limiting Exposures: Supervise construction operations to ensure that no part of the construction, completed or in progress, is subject to harmful, dangerous, damaging, or otherwise deleterious exposure during the construction period.

3.6 PROTECTION OF INSTALLED CONSTRUCTION

A. Provide final protection and maintain conditions that ensure installed Work is without damage or deterioration at time of Substantial Completion.

B. Protection of Existing Items: Provide protection and ensure that existing items to remain undisturbed by construction are maintained in condition that existed at commencement of the Work.

C. Comply with manufacturer's written instructions for temperature and relative humidity.

END OF SECTION



PART 1 - GENERAL

1.1 SUMMARY

A. Section includes administrative and procedural requirements for contract closeout, including, but not limited to, the following:

1. Substantial Completion procedures. 2. Final completion procedures. 3. Warranties. 4. Final cleaning. 5. Repair of the Work.

1.2 ACTION SUBMITTALS

A. Contractor's List of Incomplete Items: Initial submittal at Substantial Completion.

B. Certified List of Incomplete Items: Final submittal at final completion.

1.3 CLOSEOUT SUBMITTALS

A. Certificate of Insurance: For continuing coverage.

1.4 SUBSTANTIAL COMPLETION PROCEDURES

A. Contractor's List of Incomplete Items: Prepare and submit a list of items to be completed and corrected (Contractor's punch list), indicating the value of each item on the list and reasons why the Work is incomplete.

B. Submittals Prior to Substantial Completion: Complete the following a minimum of 10 days prior to requesting inspection for determining date of Substantial Completion. List items below that are incomplete at time of request.

1. Certificates of Release: Obtain and submit releases from authorities having jurisdiction permitting Owner unrestricted use of the Work and access to services and utilities. Include occupancy permits, operating certificates, and similar releases.

2. Submit closeout submittals specified in other Division 01 Sections, including project record documents, operation and maintenance manuals, damage or settlement surveys, property surveys, and similar final record information.

3. Submit closeout submittals specified in individual Sections, including specific warranties, workmanship bonds, maintenance service agreements, final certifications, and similar documents.

4. Submit maintenance material submittals specified in individual Sections, including tools, spare parts, extra materials, and similar items, and deliver to location designated by Owner. Label with manufacturer's name and model number.

5. Submit changeover information related to Owner's occupancy, use, operation, and maintenance.



C. Procedures Prior to Substantial Completion: Complete the following a minimum of 10 days prior to requesting inspection for determining date of Substantial Completion. List items below that are incomplete at time of request.

1. Advise Owner of pending insurance changeover requirements. 2. Make final changeover of permanent locks and deliver keys to Owner. Advise Owner's

personnel of changeover in security provisions. 3. Perform preventive maintenance on equipment used prior to Substantial Completion. 4. Advise Owner of changeover in utility services. 5. Participate with Owner in conducting inspection and walkthrough with local emergency

responders. 6. Terminate and remove temporary facilities from Project site, along with mockups,

construction tools, and similar elements. 7. Complete final cleaning requirements. 8. Touch up paint and otherwise repair and restore marred exposed finishes to eliminate

visual defects.

D. Inspection: Submit a written request for inspection to determine Substantial Completion a minimum of 10 days prior to date the Work will be completed and ready for final inspection and tests. On receipt of request, Architect will either proceed with inspection or notify Contractor of unfulfilled requirements. Architect will prepare the Certificate of Substantial Completion after inspection or will notify Contractor of items, either on Contractor's list or additional items identified by Architect, that must be completed or corrected before certificate will be issued.

1.5 FINAL COMPLETION PROCEDURES

A. Submittals Prior to Final Completion: Before requesting final inspection for determining final completion, complete the following:

1. Submit a final Application for Payment according to Section 012900 "Payment Procedures."

2. Certified List of Incomplete Items: Submit certified copy of Architect's Substantial Completion inspection list of items to be completed or corrected (punch list), endorsed and dated by Architect. Certified copy of the list shall state that each item has been completed or otherwise resolved for acceptance.

3. Certificate of Insurance: Submit evidence of final, continuing insurance coverage complying with insurance requirements.

B. Inspection: Submit a written request for final inspection to determine acceptance a minimum of 10 days prior to date the work will be completed and ready for final inspection and tests. On receipt of request, Architect will either proceed with inspection or notify Contractor of unfulfilled requirements. Architect will prepare a final Certificate for Payment after inspection or will notify Contractor of construction that must be completed or corrected before certificate will be issued.

1.6 LIST OF INCOMPLETE ITEMS (PUNCH LIST)

A. Organization of List: Include name and identification of each space and area affected by construction operations for incomplete items and items needing correction including, if necessary, areas disturbed by Contractor that are outside the limits of construction.

1. Organize list of spaces in sequential order. 2. Organize items applying to each space by major element, including categories for ceiling,

individual walls, floors, equipment, and building systems.



1.7 SUBMITTAL OF PROJECT WARRANTIES

A. Time of Submittal: Submit written warranties on request of Architect for designated portions of the Work where warranties are indicated to commence on dates other than date of Substantial Completion, or when delay in submittal of warranties might limit Owner's rights under warranty.

B. Organize warranty documents into an orderly sequence based on the table of contents of Project Manual.

C. Warranty Electronic File: Provide warranties and bonds in PDF format. Assemble complete warranty and bond submittal package into a single electronic PDF file with bookmarks enabling navigation to each item. Provide bookmarked table of contents at beginning of document.

1. Submit by email to Architect.

D. Warranties in Paper Form:

1. Bind warranties and bonds in heavy-duty, three-ring, vinyl-covered, loose-leaf binders, thickness as necessary to accommodate contents, and sized to receive 8-1/2-by-11-inch paper.

E. Provide additional copies of each warranty to include in operation and maintenance manuals.

PART 2 - PRODUCTS

2.1 MATERIALS

A. Cleaning Agents: Use cleaning materials and agents recommended by manufacturer or fabricator of the surface to be cleaned. Do not use cleaning agents that are potentially hazardous to health or property or that might damage finished surfaces.

PART 3 - EXECUTION

3.1 FINAL CLEANING

A. General: Perform final cleaning. Conduct cleaning and waste-removal operations to comply with local laws and ordinances and Federal and local environmental and antipollution regulations.

B. Cleaning: Employ experienced workers or professional cleaners for final cleaning. Clean each surface or unit to condition expected in an average commercial building cleaning and maintenance program. Comply with manufacturer's written instructions.

1. Complete the following cleaning operations before requesting inspection for certification of Substantial Completion for entire Project or for a designated portion of Project:

a. Clean Project site, yard, and grounds, in areas disturbed by construction activities, including landscape development areas, of rubbish, waste material, litter, and other foreign substances.

b. Clean exposed exterior and interior hard-surfaced finishes to a dirt-free condition, free of stains, films, and similar foreign substances. Avoid disturbing natural



weathering of exterior surfaces. Restore reflective surfaces to their original condition.

c. Remove debris and surface dust from limited access spaces, including roofs, plenums, shafts, trenches, equipment vaults, manholes, attics, and similar spaces.

d. Sweep concrete floors broom clean in unoccupied spaces. e. Vacuum carpet and similar soft surfaces, removing debris and excess nap; clean

according to manufacturer's recommendations if visible soil or stains remain. f. Clean plumbing fixtures to a sanitary condition, free of stains, including stains

resulting from water exposure. g. Replace disposable air filters and clean permanent air filters. Clean exposed

surfaces of diffusers, registers, and grills. h. Leave Project clean and ready for occupancy.

3.2 REPAIR OF THE WORK

A. Complete repair and restoration operations, before requesting inspection for determination of Substantial Completion.

B. Repair, or remove and replace, defective construction. Repairing includes replacing defective parts, refinishing damaged surfaces, touching up with matching materials, and properly adjusting operating equipment. Where damaged or worn items cannot be repaired or restored, provide replacements. Remove and replace operating components that cannot be repaired. Restore damaged construction and permanent facilities used during construction to specified condition.

END OF SECTION



PART 1 - GENERAL

1.1 SUMMARY

A. Section includes administrative and procedural requirements for preparing operation and maintenance manuals, including the following:

1. Operation and maintenance documentation directory manuals. 2. Emergency manuals. 3. Systems and equipment operation manuals. 4. Systems and equipment maintenance manuals. 5. Product maintenance manuals.


A. Submit operation and maintenance manuals indicated. Provide content for each manual as specified in individual Specification Sections, and as reviewed and approved at the time of Section submittals. Submit reviewed manual content formatted and organized as required by this Section.

1. Architect will comment on whether content of operation and maintenance submittals is acceptable.

2. Where applicable, clarify and update reviewed manual content to correspond to revisions and field conditions.

B. Format: Submit operation and maintenance manuals in the following format:

1. Submit on digital media acceptable to Architect. Enable reviewer comments on draft submittals.

C. Final Manual Submittal: Submit each manual in final form prior to requesting inspection for Substantial Completion and at least 15 days before commencing demonstration and training. Architect will return copy with comments.

1. Correct or revise each manual to comply with Architect's comments. Submit copies of each corrected manual within 15 days of receipt of Architect's comments and prior to commencing demonstration and training.

D. Comply with Section 017700 "Closeout Procedures" for schedule for submitting operation and maintenance documentation.

1.3 FORMAT OF OPERATION AND MAINTENANCE MANUALS

A. Manuals, Electronic Files: Submit manuals in the form of a multiple file composite electronic PDF file for each manual type required.

1. Electronic Files: Use electronic files prepared by manufacturer where available. Where scanning of paper documents is required, configure scanned file for minimum readable file size.



2. File Names and Bookmarks: Bookmark individual documents based on file names. Name document files to correspond to system, subsystem, and equipment names used in manual directory and table of contents. Group documents for each system and subsystem into individual composite bookmarked files, then create composite manual, so that resulting bookmarks reflect the system, subsystem, and equipment names in a readily navigated file tree. Configure electronic manual to display bookmark panel on opening file.

1.4 REQUIREMENTS FOR EMERGENCY, OPERATION, AND MAINTENANCE MANUALS

A. Organization of Manuals: Unless otherwise indicated, organize each manual into a separate section for each system and subsystem, and a separate section for each piece of equipment not part of a system. Each manual shall contain the following materials, in the order listed:

1. Title page. 2. Table of contents. 3. Manual contents.

B. Title Page: Include the following information:

1. Subject matter included in manual. 2. Name and address of Project. 3. Name and address of Owner. 4. Date of submittal. 5. Name and contact information for Contractor. 6. Name and contact information for Construction Manager. 7. Name and contact information for Architect. 8. Name and contact information for Commissioning Authority. 9. Names and contact information for major consultants to the Architect that designed the

systems contained in the manuals. 10. Cross-reference to related systems in other operation and maintenance manuals.

C. Table of Contents: List each product included in manual, identified by product name, indexed to the content of the volume, and cross-referenced to Specification Section number in Project Manual.

D. Manual Contents: Organize into sets of manageable size. Arrange contents alphabetically by system, subsystem, and equipment. If possible, assemble instructions for subsystems, equipment, and components of one system into a single binder.

E. Identification: In the documentation directory and in each operation and maintenance manual, identify each system, subsystem, and piece of equipment with same designation used in the Contract Documents. If no designation exists, assign a designation according to ASHRAE Guideline 4, "Preparation of Operating and Maintenance Documentation for Building Systems."

1.5 EMERGENCY MANUALS

A. Emergency Manual: Assemble a complete set of emergency information indicating procedures for use by emergency personnel and by Owner's operating personnel for types of emergencies indicated.

B. Content: Organize manual into a separate section for each of the following:



1. Type of emergency. 2. Emergency instructions. 3. Emergency procedures.

C. Type of Emergency: Where applicable for each type of emergency indicated below, include instructions and procedures for each system, subsystem, piece of equipment, and component:

1. Fire. 2. Flood. 3. Gas leak. 4. Water leak. 5. Power failure. 6. Water outage. 7. System, subsystem, or equipment failure. 8. Chemical release or spill.

D. Emergency Instructions: Describe and explain warnings, trouble indications, error messages, and similar codes and signals. Include responsibilities of Owner's operating personnel for notification of Installer, supplier, and manufacturer to maintain warranties.

E. Emergency Procedures: Include the following, as applicable:

1. Instructions on stopping. 2. Shutdown instructions for each type of emergency. 3. Operating instructions for conditions outside normal operating limits. 4. Required sequences for electric or electronic systems. 5. Special operating instructions and procedures.

1.6 SYSTEMS AND EQUIPMENT OPERATION MANUALS

A. Systems and Equipment Operation Manual: Assemble a complete set of data indicating operation of each system, subsystem, and piece of equipment not part of a system. Include information required for daily operation and management, operating standards, and routine and special operating procedures.

B. Content: In addition to requirements in this Section, include operation data required in individual Specification Sections and the following information:

1. System, subsystem, and equipment descriptions. Use designations for systems and equipment indicated on Contract Documents.

2. Performance and design criteria if Contractor has delegated design responsibility. 3. Operating standards. 4. Operating procedures. 5. Operating logs. 6. Wiring diagrams. 7. Control diagrams. 8. Piped system diagrams. 9. Precautions against improper use. 10. License requirements including inspection and renewal dates.

C. Descriptions: Include the following:

1. Product name and model number. Use designations for products indicated on Contract Documents.



2. Manufacturer's name. 3. Equipment identification with serial number of each component. 4. Equipment function. 5. Operating characteristics. 6. Limiting conditions. 7. Performance curves. 8. Engineering data and tests. 9. Complete nomenclature and number of replacement parts.

D. Operating Procedures: Include the following, as applicable:

1. Startup procedures. 2. Equipment or system break-in procedures. 3. Routine and normal operating instructions. 4. Regulation and control procedures. 5. Instructions on stopping. 6. Normal shutdown instructions. 7. Seasonal and weekend operating instructions. 8. Required sequences for electric or electronic systems. 9. Special operating instructions and procedures.

E. Systems and Equipment Controls: Describe the sequence of operation, and diagram controls as installed.

F. Piped Systems: Diagram piping as installed, and identify color coding where required for identification.

1.7 SYSTEMS AND EQUIPMENT MAINTENANCE MANUALS

A. Systems and Equipment Maintenance Manuals: Assemble a complete set of data indicating maintenance of each system, subsystem, and piece of equipment not part of a system. Include manufacturers' maintenance documentation, preventive maintenance procedures and frequency, repair procedures, wiring and systems diagrams, lists of spare parts, and warranty information.

B. Content: For each system, subsystem, and piece of equipment not part of a system, include source information, manufacturers' maintenance documentation, maintenance procedures, maintenance and service schedules, spare parts list and source information, maintenance service contracts, and warranties and bonds, as described below.

C. Manufacturers' Maintenance Documentation: Include the following information for each component part or piece of equipment:

1. Standard maintenance instructions and bulletins; include only sheets pertinent to product or component installed. Mark each sheet to identify each product or component incorporated into the Work. If data include more than one item in a tabular format, identify each item using appropriate references from the Contract Documents. Identify data applicable to the Work and delete references to information not applicable.

a. Prepare supplementary text if manufacturers' standard printed data are not available and where the information is necessary for proper operation and maintenance of equipment or systems.



2. Drawings, diagrams, and instructions required for maintenance, including disassembly and component removal, replacement, and assembly.

3. Identification and nomenclature of parts and components. 4. List of items recommended to be stocked as spare parts.

D. Maintenance Procedures: Include the following information and items that detail essential maintenance procedures:

1. Test and inspection instructions. 2. Troubleshooting guide. 3. Precautions against improper maintenance. 4. Disassembly; component removal, repair, and replacement; and reassembly instructions. 5. Aligning, adjusting, and checking instructions. 6. Demonstration and training video recording, if available.

E. Maintenance and Service Schedules: Include service and lubrication requirements, list of required lubricants for equipment, and separate schedules for preventive and routine maintenance and service with standard time allotment.

F. Spare Parts List and Source Information: Include lists of replacement and repair parts, with parts identified and cross-referenced to manufacturers' maintenance documentation and local sources of maintenance materials and related services.

G. Warranties and Bonds: Include copies of warranties and bonds and lists of circumstances and conditions that would affect validity of warranties or bonds.

1. Include procedures to follow and required notifications for warranty claims.

H. Drawings: Prepare drawings supplementing manufacturers' printed data to illustrate the relationship of component parts of equipment and systems and to illustrate control sequence and flow diagrams. Coordinate these drawings with information contained in record Drawings to ensure correct illustration of completed installation.

1.8 PRODUCT MAINTENANCE MANUALS

A. Product Maintenance Manual: Assemble a complete set of maintenance data indicating care and maintenance of each product, material, and finish incorporated into the Work.

B. Content: Organize manual into a separate section for each product, material, and finish. Include source information, product information, maintenance procedures, repair materials and sources, and warranties and bonds, as described below.

C. Product Information: Include the following, as applicable:

1. Product name and model number. 2. Manufacturer's name. 3. Color, pattern, and texture. 4. Material and chemical composition. 5. Reordering information for specially manufactured products.

D. Maintenance Procedures: Include manufacturer's written recommendations and the following:

1. Inspection procedures. 2. Types of cleaning agents to be used and methods of cleaning.



3. List of cleaning agents and methods of cleaning detrimental to product. 4. Schedule for routine cleaning and maintenance. 5. Repair instructions.

E. Repair Materials and Sources: Include lists of materials and local sources of materials and related services.

F. Warranties and Bonds: Include copies of warranties and bonds and lists of circumstances and conditions that would affect validity of warranties or bonds.

1. Include procedures to follow and required notifications for warranty claims.



END OF SECTION



PART 1 - GENERAL

1.1 SUMMARY

A. Section includes administrative and procedural requirements for project record documents, including the following:

1. Record Drawings. 2. Record Specifications. 3. Record Product Data.


A. Record Drawings: Comply with the following:

1. Number of Copies: Submit one set(s) of marked-up record prints.

B. Record Specifications: Submit annotated PDF electronic files of Project's Specifications, including addenda and contract modifications.

C. Record Product Data: Submit annotated PDF electronic files and directories of each submittal.

1. Where record Product Data are required as part of operation and maintenance manuals, submit duplicate marked-up Product Data as a component of manual.

1.3 RECORD DRAWINGS

A. Record Prints: Maintain one set of marked-up paper copies of the Contract Drawings and Shop Drawings, incorporating new and revised drawings as modifications are issued.

1. Preparation: Mark record prints to show the actual installation where installation varies from that shown originally. Require individual or entity who obtained record data, whether individual or entity is Installer, subcontractor, or similar entity, to provide information for preparation of corresponding marked-up record prints.

a. Give particular attention to information on concealed elements that would be difficult to identify or measure and record later.

b. Accurately record information in an acceptable drawing technique. c. Record data as soon as possible after obtaining it. d. Record and check the markup before enclosing concealed installations. e. Cross-reference record prints to corresponding photographic documentation.

2. Content: Types of items requiring marking include, but are not limited to, the following:

a. Dimensional changes to Drawings. b. Revisions to details shown on Drawings. c. Depths of foundations. d. Locations and depths of underground utilities. e. Revisions to routing of piping and conduits. f. Revisions to electrical circuitry.



g. Actual equipment locations. h. Duct size and routing. i. Locations of concealed internal utilities. j. Changes made by Change Order or Construction Change Directive. k. Changes made following Architect's written orders. l. Details not on the original Contract Drawings. m. Field records for variable and concealed conditions. n. Record information on the Work that is shown only schematically.

3. Mark the Contract Drawings and Shop Drawings completely and accurately. Use personnel proficient at recording graphic information in production of marked-up record prints.

4. Mark record sets with erasable, red-colored pencil. Use other colors to distinguish between changes for different categories of the Work at same location.

5. Mark important additional information that was either shown schematically or omitted from original Drawings.

6. Note Construction Change Directive numbers, alternate numbers, Change Order numbers, and similar identification, where applicable.

B. Format: Identify and date each record Drawing; include the designation "PROJECT RECORD DRAWING" in a prominent location.

1. Record Prints: Organize record prints into manageable sets. Bind each set with durable paper cover sheets. Include identification on cover sheets.

2. Format: Annotated PDF electronic file. 3. Identification: As follows:

a. Project name. b. Date. c. Designation "PROJECT RECORD DRAWINGS." d. Name of Architect. e. Name of Contractor.

1.4 RECORD SPECIFICATIONS

A. Preparation: Mark Specifications to indicate the actual product installation where installation varies from that indicated in Specifications, addenda, and contract modifications.

B. Format: Submit record Specifications as annotated PDF electronic file or PDF electronic file(s) of marked-up paper copy of Specifications.

1.5 RECORD PRODUCT DATA

A. Recording: Maintain one copy of each submittal during the construction period for project record document purposes. Post changes and revisions to project record documents as they occur; do not wait until end of Project.

B. Preparation: Mark Product Data to indicate the actual product installation where installation varies substantially from that indicated in Product Data submittal.

C. Format: Submit record Product Data as annotated PDF electronic file or scanned PDF electronic file(s) of marked-up paper copy of Product Data.



1. Include record Product Data directory organized by Specification Section number and title, electronically linked to each item of record Product Data.

1.6 MAINTENANCE OF RECORD DOCUMENTS

A. Maintenance of Record Documents: Store record documents in the field office apart from the Contract Documents used for construction. Do not use project record documents for construction purposes. Maintain record documents in good order and in a clean, dry, legible condition, protected from deterioration and loss. Provide access to project record documents for Architect's reference during normal working hours.

PART 2 - PRODUCTS

PART 3 - EXECUTION

END OF SECTION



PART 1 GENERAL 1.1 GENERAL A. Drawings, Section I - Legal Documents and Division 1 Specification Sections, apply to this

Section. 1.2 SCOPE A. Includes all labor, material and equipment required to furnish and install a complete electrical

system as shown on the drawings and as specified herein. B. Work includes but is not necessarily limited to the following: 1. Removal of existing fire alarm system and providing new fire alarm system and

associated electrical power to all devices, controls and equipment. 2. Final connections of equipment specified or furnished under other divisions of this

specification. 4. Fire alarm system in accordance with Section 283100 and as indicated on the drawings. 5. Demolition of existing fire alarm system, complete. To include removal of all old fire

alarm system equipment, devices, accessible back-boxes, wiring, exposed/accessible conduits, etc, complete. Blank covers to be provided on remaining old flush device boxes not reused by new work.

6. Cutting and patching as necessary to install electrical work. Necessary patching of holes and damaged surfaces where old fire alarm equipment was removed.

7. Replace suspended T-bar ceiling tiles at locations where old fire alarm device is removed and no new device replaces existing.

C. Omission of express reference to any material or labor necessary for or incidental to a

complete installation shall not be construed as releasing Contractor from furnishing such material and labor. The new fire alarm system and associated electrical work as installed shall be complete and functional with all items in operable condition.

D. This contract shall include all contingencies which may arise and may be required by alteration

and demolition work. This shall include necessary removal, relocation or extending of existing electrical outlets, conduit, wiring and equipment and any necessary splicing, extending or reconnecting of existing conduit and wiring systems. Existing-to-remain systems disturbed or interrupted shall be reconstructed to maintain original operation.

E. Carefully examine the building site and compare the drawings with existing conditions.

Further, verify utility requirements with the proper utility companies involved. By the act of submitting a bid, the contractor shall be deemed to have made such examination and to have accepted such conditions, and to have made allowance therefore in preparing this bid.

F. Construction Power Electrical Service: 1. Make all necessary arrangements, apply for all permits, and provide all temporary

electrical service and lighting required for construction purposes during the entire period of construction, if needed for Contractor’s purposes.

2. Coordinate with all trades and provide temporary lighting and power adequate for construction.

3. Comply with all applicable OSHA and NFPA-70, National Electrical Code requirements for temporary wiring at construction sites.

4. Existing power service, panels, etc. may be used for construction power so long as continuity of service to any owner occupied space is maintained.



G. Demolition:

1. Demolition when indicated or required shall be complete. Do not abandon equipment, wiring or conduits. Concealed conduits, not exposed by demolition shall be permitted to be abandoned.

2. Removed equipment shall salvage to Contractor, unless otherwise indicated. Removed materials shall be removed from site and disposed of in a legal manner.

3. Fire alarm panels, remote power supplies, equipment and devices (manual stations, detectors, relays, notifications, etc.) shall salvage to Owner.

1.3 DRAWINGS A. The architectural drawings take precedence over the electrical drawings in the representation

of the general construction work and the drawings of the various trades take precedence in the representation of the work of those trades.

B. For the purpose of clearness and legibility, the electrical drawings are essentially

diagrammatic. The size and location of equipment is shown to scale whenever possible, but the contractor shall make use of all the data in the contract documents to properly locate all electrical equipment.

1. Maintain Code clearances about electric equipment. 2. Although the drawings are diagrammatic and Contractor shall provide installation in

accordance with Code requirements and existing building conditions whenever such conditions are different from what is shown on the drawings. It is the responsibility of the Contractor to provide all necessary material, equipment and labor for a complete and functional system that is Code compliant and satisfactory to the Owner in all respects. In the event that Code requires equipment, devices or wiring in excess of what is shown on the drawings, the Code requirements shall govern. In the event that the drawings indicate equipment, devices or wiring that exceeds Code requirements, the work shown on the drawings shall be provided.

1.4 CODES AND STANDARDS A. All electrical equipment, materials and method furnished and installed by this contractor shall

comply with the current NFPA-70 National Electrical Code as adopted by the legally constituted authorities having jurisdiction; including all local ordinances, safety orders of the State Division of Industrial Safety, and State Fire Marshal.

B. Materials shall be listed by a nationally recognized testing laboratory which is accepted by the

authority having jurisdiction, such as Underwriter's Laboratories, Inc. (UL), where such a listing exists for that style or general arrangement of equipment. Equipment shall be installed and connected in compliance with all the listing instructions.

C. It is recognized that Codes specify minimum standards, and whenever the Contract

Documents call for materials, workmanship, arrangement or construction of quality or standard higher than Code, the Contract Documents shall take precedence. In the event that the contract documents call for a quality or standard lower than Code, then Code requirements shall govern.

1.5 PERMITS AND INSPECTIONS A. Refer to Division 1 for Permits. B. All work shall be subject to the inspection of any authorized agency and the Owner or Owner's

Agent. No work shall be covered or concealed in any way prior to inspection and approval by



the proper authorities. Should uninspected work be covered, the contractor shall, at no cost to Owner, uncover all such work and, after it has been inspected and approved, repair all damage done in a manner satisfactory to the Architect.

1.6 APPROVAL OF MATERIALS A. For convenience in designation, certain materials are specified by manufacturer's name and

catalog number. Alternative equipment which is of equal capacity, style, size and quality as the equipment specified may be used subject to the approval of the Architect. The burden of proof as to the comparative suitability of the alternate equipment shall be upon the Contractor. Provide all information, demonstrations, and samples necessary or related hereto as required by the Architect. The Architect shall be the sole judge in such matters and his decision shall be final.

B. Requests for approval of alternate material or method shall be submitted to the Architect at

least seven (7) days prior to bid date and in addition shall conform with all provisions of the General Provisions of these Specifications.

C. Where the use of alternate materials results in a change of arrangement, location or size from

that indicated on the drawings, the Contractor shall submit for approval shop drawings showing the proposed changes.

D. Verify availability of all equipment and materials proposed for use in execution of Contract prior

to submitting same for approval. Discontinuance of production of any equipment or materials shall not relieve the Contractor from furnishing and installing approved alternate equipment and/or materials of equal quality and style without additional cost to Owner.

1.7 SUBMITTALS A. Before starting work, submit shop drawings and/or product literature for at least the materials

listed below: Fire Alarm System -- product literature and shop drawings Conduit and fittings -- product literature Wire and Cable -- product literature Boxes and Covers -- product literature B. Submittals shall be in accordance with Division 1 requirements. C. Do not include operating, maintenance or repair manuals in the product submittals unless

specifically requested. D. Re-submittals shall not include material which was previously reviewed and approved. 1.8 MAINTENANCE AND OPERATING INSTRUCTIONS A. Prepare Maintenance and Operating Instructions which cover electrical systems and

equipment furnished and installed for this project. B. Include all published literature which is provided by the equipment manufacturer. As a

minimum, the following shall be provided:

1. Instruction sheets or manuals 2. Repair manuals 3. Spare parts lists 4. Wiring Diagrams



5. Manufacturer's warrantee information 6. Other written material or drawings furnished with or packed with the products.

C. Include a copy of the complete electrical products submittal as described in paragraph 1.7 A.

above. Keep products submittal intact and separate from the items described in paragraph 1.8 B.

D. Assemble each set of Maintenance and Operating Instructions into 3-ring binder. Electronic

copy of materials may be provided when suitable for the purpose. E. Provide table of contents and tab separators to organize the manual by specification section

and product type. Copy of the product submittals shall be in a separate section titled: "Electrical Products Submittals."

1.9 RECORD DRAWINGS A. Provide and keep up-to-date one (1) separate complete and legible "as-built" set of drawing

prints, corrected daily and showing every change from the original drawings and specifications, exact "as-built" location, size and kind of fixture, runs of wire and conduit, location of pull and junction boxes, and other equipment as actually installed. In addition, items changed or deleted by addendum or change orders shall be indicated. This drawing shall be kept on-site and used only as a record set. This set shall not be used for construction purposes.

B. In each section of the record drawings and specifications the manufacturer's name, product

name, and catalog number for each product used shall be indicated. When the bid documents indicate more than one name or catalog number for a product, the products not used shall be deleted from the record drawings so that only the exact products used are the only types described on the record drawings.

C. Addenda, Change Order and Clarification drawings issued for construction during the course

of the work shall be drawn on to the record drawings at the correct location and on the correct drawings.

D. Changes as shown on corrected drawing prints shall be professionally drawn in accordance

with Division 1 requirements. Such drawings shall be accurate and will provide a record for future maintenance and service.

1.10 MASTER KEYING A. For equipment such as panelboards and equipment cabinets which are supplied with integral

locks, all such locks shall be keyed alike. Furnish three (3) sets of keys for each lock. B. All keys shall be identified as to the locks which they operate. 1.11 IDENTIFICATION A. Pull and junction boxes for fire alarm system shall be identified. Use waterproof marker on

cover for boxes above accessible ceilings and exposed in unfinished spaces, write identification on inside of box when in exposed location.

B. Pull, outlet and junction boxes for fire alarm system shall be color coded RED by painting the

inside and outside of box (and cover when in unfinished space or in equipment room) prior to installation.

This color coding shall also be provided for existing boxes which are used for new fire alarm

work.



New EMT raceway provided for fire alarm wiring shall be factory color coded red. C. Update electric panel directories to indicate circuits supplying fire alarm equipment. Any

existing fire alarm power circuit which is removed and not replaced shall have the fire alarm designation removed from the electric panel directory and the remaining breaker shall be indicated to be a ‘spare’.

1.12 COOPERATION WITH OTHERS A. Work shall proceed so that it will harmonize with that of other trades. All work shall coordinate

with other trades and contractor is responsible for correct placing of work in proper location to avoid conflict.

1.13 PRELIMINARY OPERATION A. Owner may require operation of any portion of systems or equipment prior to final completion

and acceptance of work. Such preliminary operation shall not be construed as an acceptance of any work.

B. Contractor shall become familiar with the requirements and schedule for construction phasing

and shall comply as required to have Electrical systems operational at the appropriate time. It may be necessary for electrical work to be completed ahead of other trades or ahead of the scheduled completion of a given area of the building in order to make the work functional in a preceding phase of work.

1.14 CHANGES AND ADDITIONAL WORK A. Changes shall not be made from the work as indicated except on written order of Architect,

stating change to be made for the work. 1.15 PROTECTION A. Materials, equipment, etc., including those furnished by others that are to be installed by this

contractor shall be received and properly protected from damage. 1.16 GUARANTEE A. Refer to the General Conditions for basic warranty requirements. B. When manufacturer's warranty exceeds the warranty as described in the General Conditions,

the full manufacturer's warrantee shall apply to this work. PART 2 PRODUCTS 2.1 GENERAL A. Except as specifically noted, materials shall be new, full weight or size, standard in every way,

the best quality of their respective kinds, and satisfactory to the Architect. B. Equipment and Materials shall be suitable for use intended (i.e. weatherproof enclosures for

exterior or wet locations, proper voltage ratings for fuses and safety switches, etc.). 2.2 RACEWAYS A. Rigid Metallic Conduit:



1. Full weight, hot dipped galvanized or sherardized. Minimum size is 3/4-inch trade size. 2. Fittings installed underground, in wet locations or exposed outdoors shall be threaded

type -- no set screw or compression types. 3. Fittings installed indoors where otherwise impracticable to install threaded type fittings

shall be permitted to be steel compression type. Other indoor locations shall use threaded type fittings.

4. Rigid Metallic Conduit installed underground or concealed in slabs on grade shall be protected from corrosion by Scotch No. 50 tape, half overlap wrapped. Such tape wrapping shall cover the entire conduit system below grade or in concrete slabs on grade.

5. Rigid Metallic Conduit shall be permitted to be used as raceway for all wiring systems at any location concealed or exposed (exposed wiring only when specifically permitted). Hazardous (classified) locations shall be required to use Rigid Metallic Conduit with threaded fittings.

B. Intermediate Metal Conduit (IMC):

1. Hot dipped galvanized or sherardized. Minimum size is 3/4-inch trade size. 2. Fittings installed underground, in wet locations or exposed outdoors shall be threaded

type -- no set screw or compression types. 3. Fittings installed indoors where otherwise impracticable to install threaded type fittings

shall be permitted to be steel compression type. Other indoor locations shall use threaded type fittings.

4. IMC installed underground or in concrete slabs on grade shall be protected from corrosion as specified above for Rigid Metallic Conduit.

5. IMC shall be permitted to be used for raceways for all wiring systems at any location concealed or exposed (exposed wiring only when specifically permitted) except IMC shall not be used in hazardous locations or when drawings indicate use of a different type of raceway for the specific run.

C. Electrical Metallic Tubing (EMT):

1. EMT shall be hot dipped galvanized or sherardized. Minimum size is 3/4-inch trade size. All new EMT used for fire alarm circuits operating at 24VDC nominal shall be factory red color coded.

2. EMT may be used concealed in attic, furred spaces and stud walls. 3. EMT may be used for vertical runs in masonry and brick but shall not be used for

horizontal runs in masonry or brick. EMT shall not be used embedded in poured concrete. Vertical runs of EMT shall be permitted to be embedded within concrete filled cells of masonry units or concrete bond beams or similar construction.

4. When exposed raceway is permitted, EMT may be used only above 4'-0" A.F.F. In addition, in dedicated electrical and telephone rooms and chases, EMT may be used for all exposed raceways not subject to physical damage.

a. Do not use exposed EMT above roofs. b. Do not use exposed EMT in any location subject to severe physical damage such

as loading docks or locations exposed to vehicular traffic. c. In such locations exposed raceways shall be rigid steel or IMC raceways with

threaded fittings. D. EMT Fittings and Connectors:

1. Appleton, Crouse-Hinds or Thomas & Betts. 2. Do not use die cast or pot metal type.



3. Use steel compression type fittings for sizes 2 inch and smaller. For 2 1/2-inch and larger EMT steel set screw or compression type fittings may be used.

4. Use insulated throat connectors except when insulated bushings are used. E. Rigid Non-Metallic Conduit (PVC):

1. Heavy wall schedule 80 or of type as noted on drawings. Minimum size is 3/4-inch trade size.

2. Fittings used with PVC shall be cement-on style, rated for same operating temperature as the conduit.

3. PVC may be used for underground conduit runs both outside and under floor inside building. PVC shall not be used anywhere above grade or exposed. Use Rigid Metallic Conduit for penetrations through concrete slabs from PVC below.

4. Provide concrete encasement for PVC only when indicated. Concrete encasement shall cover conduits minimum of 3" on all sides. Provide plastic conduit supports as necessary for duct alignment in concrete encased duct banks.

F. Flexible Metallic Conduit (Greenfield):

1. Greenfield connectors shall be screw clamp type -- no twist-in connectors allowed. Do not use 90 degree flex connectors without prior approval.

2. Use only steel flex conduit, not aluminum. Minimum size shall be 1/2" . 3. Greenfield shall be used in lengths not to exceed 3'-0", unless supported in accordance

with NEC requirements. Use only indoors in dry locations. 4. Flex whips to supply smoke detectors or other fire alarm devices mounted on

suspended ceilings shall not exceed 6’-0” in length. G. Liquid-Tight Flexible Metallic Conduit (Liquid-Tight Flex):

1. Connectors shall be weatherproof compression type. 2. Minimum size 1/2" trade size, do not use non-metallic type. 3. Liquid-tight flex shall be used in lengths not to exceed 3'-0".

H. Special Raceways: As indicated. 2.3 OUTLET BOXES AND JUNCTION BOXES A. Galvanized code gauge steel construction for concealed work. B. Size in accordance with Articles 312 and 314 of NFPA-70 National Electrical Code. C. Provide plaster rings or tile covers of proper gang as required. D. Minimum size for any outlet is 4" sq. x 1-1/2" deep or larger when required with appropriate

plaster ring. E. Do not use extension boxes to achieve required box capacity. Provide boxes without

extensions of sufficient size to accommodate all of the wiring installed.

F. Boxes installed exposed below 8’-0” AFF shall be cast metal type boxes with conduit hubs (no knock-outs), such as FS/FD or ‘bell’ boxes. Provide screw-in hub plugs in all unused opening in such boxes.

2.4 CONDUCTORS



A. Unless indicated otherwise, all conductors shall be insulated, 98% minimum conductivity copper.

1. Minimum size for lighting and power circuits is No. 12 AWG, provide larger size when

indicated or required. 3. Minimum size for fire alarm circuits is No. 14 AWG, solid copper conductor, unless part

of a cable assembly. 4. Minimum size for controls is No. 14AWG, stranded or solid copper conductor when

overcurrent protection on control circuit does not exceed 15 amperes. B. Conductors construction:

1. No. 10 AWG and smaller solid conductor. 2. No. 8 AWG and larger for general wiring stranded conductor. 3. No. 8 - 2 AWG exposed grounding conductors solid conductor.

C. Conductor insulation:

1. No. 12 - 8 AWG in wet or dry locations: "THHN or THWN" or "THWN-2". 2. Fire alarm conductors installed underground: "XHHW" or "XHHW-2". 3. Special conductor insulation as noted.

D. Color code all conductors. Use colored insulation (not colored tape) for sizes No. 6 AWG and

smaller. Use colored tape at all terminations, junction and pull boxes, etc., for sizes No. 4 AWG and larger.

1. 208Y/120V three phase system -- Neutral White, Phase A Black, Phase B Red, Phase

C Blue, Ground Green. 2.5 COVER PLATES A. For flush outlets in interior, non-weatherproof locations use Pass & Seymour standard size

satin finish stainless steel #302. All plates shall be of same type and style. B. For surface outlets in interior, non-weatherproof locations with exposed raceways use cast

covers with proper openings for FS boxes. PART 3 EXECUTION 3.1 GENERAL A. Work to be accomplished under this specification shall be performed by experienced,

competent personnel. B. Except where otherwise specifically permitted by these specifications or drawings, raceways

and wiring of every system shall be installed concealed. C. Except where otherwise specifically permitted by these specifications or drawings, all wiring of

every system shall be installed in approved raceways. The "PRODUCTS" part of this specification describes the approved locations for each type of raceway system and the requirements set forth in that section shall be adhered to for all raceway systems including systems for power, lighting, telephone, clock, sound, fire alarm, television, data, and any other special system. The use of types AC, NM, MC, SE and UF cable type wiring methods are not approved.

D. Chases and Openings:



1. Any chases and openings other than those described on drawings that are found

necessary to accommodate electrical work shall be provided at proper time to prevent unnecessary cutting. Provide approved access panels or doors if necessary.

2. Fire stop all chases and openings as required by Firestopping section. E. Penetrations through Roof: 1. Penetration through finished roof caused by work of this division shall be properly

flashed or otherwise waterproofed as required by the roofer and Architect. 2. No penetration shall occur closer than 12" from any other penetration. 3. No electrical work shall run above roof except for vertical penetration for roof mounted

HVAC equipment. F. Finish painting of new exposed fire alarm circuits is not required. 3.2 EXCAVATION A. Do all excavating required to install the work. Except under concrete floors laid on the ground,

the underground conduit shall be buried to a depth of not less than 24" below the finished grade.

B. The depth of conduits run under concrete floors and slabs on grade (concrete minimum 4"

thickness) may be reduced to 8" below the slab. Do not allow conduits to be embedded in the concrete floor, except at floor boxes and where conduits turn out of floor.

C. Backfill, puddle and tamp all excavations and remove all surplus materials from the site. All

backfill and compaction shall be in accordance with the Architect's instructions. Provide plastic marker tape 12" below grade over all underground conduit runs outside of building.

3.3 INSTALLATION OF RACEWAYS A. Unless otherwise noted, all wiring of every description shall be run in conduit. Conduit, except

as otherwise specifically noted, shall be run concealed. Exposed conduit shall be run parallel with supporting wall, beam or ceiling and with each other, with right angle turns consisting of cast metal fittings (LB condulets shall not be used for conduit larger than 1-1/4" in diameter) or symmetrical bends, and with supports spaced at not more than 5' apart. All runs of conduit shall be installed in such manner as to avoid trapped condensation. No junctions or splices in wire shall be made in condulets.

B. Minimum size conduit is 3/4-inch. Provide larger size conduit when indicated or required due

to conductor fill. At Contractor’s choice, larger conduits than indicated may be provided for ease of conductor pulling, etc.

C. Conduit shall be installed as a complete system, continuous from outlet to outlet, cabinet, box

for fitting and be so mechanically and electrically connected that adequate electrical continuity from one conduit to another is secured.

D. Conduit to be installed in concrete work shall be carefully laid and rigidly supported in the

forms, as directed, and in such manner as to provide proper clearances and so that all boxes and outlets will be in exact locations after concrete has set and forms are removed. Conduit run in concrete walls or floors shall be embedded deep enough so that no portions of the conduit or fittings will show through the concrete and so there will be no cracking of the concrete finished surfaces. Obtain approval of the Structural Engineer prior to installing conduits in concrete work. Use only rigid steel conduit embedded in concrete.



E. Conduit shall not run through any structural member of the building, except as specifically directed by the Architect. This shall not prohibit conduit run through open web trusses or through factory made openings in structural members.

F. On exposed runs of conduit where junction, bends or offsets are required, provide condulets

whether such condulets are indicated on drawings or not. Bends will not be permitted around corners or beams, or equipment. Condulet covers shall be accessible. Condulet fittings shall not be used on conduit larger than 1-1/4" trade size. Use junction boxes on larger conduit. Use two hole straps on all exposed runs of conduit.

G. Separate conduit shall be used for each home run indicated on drawings. Do not combine

conduit runs. Run exactly as shown on the plan. Do not run branch circuits under floor unless so indicated (by dashed lines) on the plans.

H. Conduits shall be securely supported to the building structure. Support or fasten conduits

within 18" of all outlet, junction or pull boxes. Support or fasten conduit runs at intervals not to exceed 5'-0" on center. Single runs of conduit may be supported with 12 gauge galvanized tie wire. For multiple runs, use conduit trapezes made of suitable Unistrut or Kindorf channel with threaded rod (not less than 1/4" outside diameter) and suitable conduit straps. For multiple exposed conduit runs, use Unistrut or Kindorf channel with suitable conduit straps. Channels embedded in concrete shall not be deeper than 7/8". Nails, perforated strap and plumber's tape are not acceptable means of support.

I. Anchors which fasten devices, raceways, etc. to brick or masonry shall be metal expansion

type with screws or bolts. Plastic or shot-in anchors are not acceptable. J. Anchors which fasten devices, raceways, etc. to hollow, dry, or plaster walls shall be a type

which expands after it has penetrated the material such as toggle, molly, etc. Wood screws into 2x4 or larger wood framing is acceptable.

L. Conduit shall not run closer than 6" to any hot water pipe, steam pipe, heater flue or vent. M. Projections through roofing shall be made watertight by proper flashing and/or pitch pockets

satisfactory to Roofing Contractor, Architect and roof bonding company. Verify method prior to rough-in and comply as required. Contractor shall supply all required roof jacks.

N. Conduit connections to tops of enclosures located outdoors or other location subject to water

shall be made with Myers hubs or weatherproof hubs that are supplied with the equipment. Gasketed locknuts as only weatherproof fitting are not approved for conduits entering the tops of enclosures.

O. The use of pliers for tightening of conduit connections or making up runs of conduit is

prohibited. All conduit joints and connections shall be wrench tight. P. Upon completing the installation of any run of conduit, test the runs and see that they are free

from all obstructions and have a smooth interior. Plug each end with conduit pennies and bushings and leave plugged until ready to pull wire. Wood or fiber plugs or concrete nails are not acceptable.

Q. The ends of conduit shall be cut square and carefully reamed out to full size with a tapered

burring reamer and shouldered in the fitting. R. No running threads will be permitted, special union fittings shall be used in lieu thereof. The

open ends of conduit shall be kept closed with approved conduit seals during the construction of the building. Rigid conduit couplings shall be of the threaded type.



S. Except as otherwise indicated on drawings, bends in conduits 1" and larger shall be made with standard conduit ells. Wire or cable bends in junction boxes or pull boxes shall be made on long radius of not less than five (5) times diameter of the cable. Nesting of conduits shall be made when more than one conduit is used in parallel without the use of standard ells.

T. Where ungrounded conductors of No. 4 or larger enter a raceway in a gutter, pull box, junction

box, or auxiliary gutter, the conductors shall be protected by a substantial bushing or liner sleeve providing a smoothly rounded insulating surface, unless the conductors are separated from the raceway fitting by a substantial insulating material securely fastened in place.

U. A nylon pull string shall be installed in all raceways which do not have conductors pulled by

this contractor. V. Flexible "Greenfield" shall be used only where necessary, approved, or directed for

connections to equipment which is removable (as for belt replacement and adjustment), or is mounted on isolation units for nontransmittal of vibration or sounds of operation. Regulation fittings shall be used for all connections to terminal, junction and switch boxes. Use liquid-tight flex where exposed to weather. Maximum length shall be 3'-0". Run conduit to within 3'-0" of outlet before using flex.

W. Existing raceways (but not Wiremold or other surface raceways) can be reused for the new

wiring when routed in useable location for the new work and when in serviceable and Code compliant condition. Existing ½” trade size raceways can be reused so long as the wire fill does not exceed that allowed by the NEC.

3.4 INSTALLATION OF OUTLETS, WIRING DEVICES AND JUNCTION BOXES A. Outlets for devices shall be installed as shown on the drawings, with switch control as

indicated. All outlets and devices shall be accurately located and shall be installed plumb with building walls. The final position of such outlets must be verified with the Architect.

B. Outlet boxes shall be sized to comply with Code, but not less than 4" square. D. Ceiling outlet boxes shall be equipped with plaster rings and extension rings as required.

Provide T-bar bridges to support boxes in suspended T-bar ceilings. E. Flush outlet boxes shall be installed with the box edge flush to not more than 1/16" recessed

into the wall. Provide box extensions as necessary for proper installation. F. Boxes shall be set so that when covers are in place they will be flush with finished building

surface, and so that fixtures will stand at right angles. Where exposed to weather, use condulet cast body type or cast FS/FD type.

G. All boxes shall be securely supported to the building structure. In metal stud work, provide

bracing between studs for all boxes. Attachment to a single vertical metal stud without additional bracing is not acceptable.

H. Approved bar hangers, fitted with fixture studs, shall be used to support outlet boxes in stud

partitions and furred or drywall ceilings. I. The Owner shall reserve the right, without additional cost, to relocate any outlet up to 6'-0"

from the location shown on the drawings provided that such instruction is given to the contractor prior to rough-in.

J. Mounting Heights:



1. Fire Alarm Manual Station +46" unless otherwise directed 2. Fire Alarm Strobe Light or Speaker Strobe +82" to centerline of box. 3. Heights given are from box center to finish floor. Consult Architect for any heights not

listed above. 4. Existing outlets that do not comply with the above mounting heights shall not be used

for the new work and new outlet boxes provided. K. All control apparatus, outlet boxes, junction and pull boxes, and other similar equipment shall

be installed and maintained in accessible positions and locations. L. Every box shall have a cover, either blank or the appropriate system outlet cover. Spare,

outlets for future equipment or existing outlets not reused shall have a blank stainless steel cover installed.

3.5 INSTALLATION OF CONDUCTORS A. All circuits and feeder wires shall be continuous from switch to terminal or most distant outlet.

No splices shall be made except in pull, junction or outlet boxes, or in panels. B. Thoroughly clean out all conduits and wireways and see that all parts are perfectly dry before

pulling any wires. Do not install any permanent wiring until all drywall taping is done and dirt removed. Any run of conduit which does not allow conductors to be fished in readily will be condemned and the run must be replaced by other conduit satisfactory to the Architect.

C. Splices and taps for conductors No. 10 AWG and smaller shall be made with approved

solderless mechanical connectors, size of the connector to be selected in accordance with the listing of the connector. All splices and taps which are not self-insulating shall be covered with thermoplastic insulating tape (Scotch No. 33) layered to a thickness equal to or greater than the conductor insulation.

D. At all outlet and switch boxes, leave not less than 6" free conductor outside of the box for

connection of devices and fixtures. E. Provide pull boxes wherever indicated or as necessary to facilitate the pulling in of wires or

cables. Run shall not exceed 200' for straight pulls without any bends. Reduce pull box spacing to 150' if one 90 degree bend or equivalent in the run; 100' if two 90 degree bends or equivalent in the run; and 90' if more than two 90 degree bends or equivalent in the run. Pull boxes shall be sized in accordance with Article 314 of the National Electrical Code. Feeders on site shall have pull boxes provided at the indicated locations.

F. Vertical runs shall be supported in accordance with Section 300-19 of the National Electrical

Code. Use wedge-in conduit cable supports or cleats in J-box as required. G. Underground splices in pull boxes or direct buried shall be insulated with 3M Scotch insulating

kits, or approved equal, suitable for the conditions encountered. H. Minimum size conductors for power and lighting circuits is #12AWG, copper. Provide larger

conductors when indicated. 3.6 TAGGING A. All branch circuits shall be left tagged in panelboards, gutters, etc., for the purpose of

distinguishing the various circuits. Phase, neutral, equipment grounding and isolated grounding conductors shall be tagged with circuit numbers. In addition, where more than one circuit occurs in junction boxes, provide tags indicating circuit numbers. Use Ideal or Brady wire marker numbers for circuit numbers, etc. Do not use metal numbering tags.



3.7 GROUNDING A. All electrical apparatus, either stationary or portable, shall be adequately grounded, either by

direct connection from frame of the apparatus or an approved ground wire connected securely to conduit, or by an approved grounded flexible cord through an approved cap and receptacle.

B. All raceways and junction boxes shall be installed in a manner such that all joints are

electrically conductive to function as an equipment grounding conductor. C. Concentric knockouts are not considered an adequate grounding means. Provide grounding

bushings on all conduits connected to concentric knockouts for all system voltages. D. Neutrals throughout the system shall not be grounded except at service entrance equipment

and at the first overcurrent devices served by the secondaries of dry type transformers. 3.8 EQUIPMENT CONNECTIONS A. All outlets, devices, equipment, etc., shall be connected to circuits and made operational as

required. 3.9 TESTS A. Contractor shall test the work in sections. All defects shall be made good immediately at

Contractor's expense, including all repairs to walls, ceilings, floors, or other portions of building damaged in making repairs. Furnish all instruments necessary for testing and pay observers necessary. Owner's representative will check observations only.

B. Refer to Section 28 3100 for special fire alarm system testing.

END OF SECTION

SECTION 283100 FIRE ALARM SYSTEM


PART 1 GENERAL 1.1 GENERAL A. Drawings, Section I - Legal Documents and Division 1 Specification Sections, apply to this

Section. 1.2 SCOPE AND GENERAL REQUIREMENTS

A. The contractor shall provide all equipment and accessories for a complete electrically

supervised Class "A" fire alarm system with addressable initiating circuits and Emergency Voice Alarm notification as described herein and as shown on the plans.

1. Portions of the existing fire alarm system equipment and wiring will be

incorporated into the new fire alarm system when so indicated. Such existing equipment and wiring shall remain as-is, unless modification of same is specifically indicated.

2. Modifications to otherwise existing fire alarm equipment and wiring shall fully conform to the requirements of this Section.

B. All equipment, wiring and operation of the system shall comply with Local and

National Codes and Ordinances. Specific reference is made to current adopted editions of:

1. Underwriters Laboratory listing and labeling of equipment. 2. 2012 International Building Code. 5. 2012 International Fire Code. 6. State of Arizona Fire Code. 8. State of Arizona Fire Marshal’s requirements. 9. NFPA 70 National Electrical Code, 2011 edition. 10. NFPA 72 National Fire Alarm Code, 2013 edition. 11. Americans with Disabilities Act (ADA). Where there are conflicts between the requirements of the various Codes and

Standards, the most restrictive or safest requirements shall apply, except that the requirements and Code interpretations by the Authority Having Jurisdiction (AHJ) for the work of this Contract shall take precedence over any and all other Codes, rules or interpretations. When the more stringent design requirement or Code requirement does not conflict with the AHJ’s requirements or interpretations of the Code requirements, then the more stringent requirement shall apply. Note that in many cases, the requirements of this Section exceed Code minimum requirements and it is the objective and intention of this Contract to do so.

C. Equipment and accessories furnished under the terms of this specification shall be the

standard products of a single manufacturer where possible and shall be U.L. listed and labeled.

D. The Contractor shall provide a Main Fire Alarm Control Panel (FACP) as part of the

total system which shall provide coordinated fire safety features as described herein. E. No signal circuit shall be initially loaded in excess of 85% of its rated ampere capacity.



F. Fire Alarm System panels and equipment shall be powered from dedicated 20

ampere, 120 volt circuits originating from the building’s electrical system. The circuit breaker in the panel feeding the system shall have a handle lock-on device and shall be identified in the circuit directory. The panel name and circuit number shall also be identified on the fire alarm panel. Existing power circuits powering the old fire alarm system may be re-used for the new fire alarm equipment. In the event that new circuits are required for new equipment, provide the circuits from electrical panel of adequate capacity in the same building are area of the fire alarm equipment being supplied. If necessary provide new circuit breaker in such electric panels.

G. The system shall contain battery backup power. The batteries shall be rechargeable

and be of a gel-cell type. The panel and remote equipment (NAC power supplies, etc.) shall contain battery chargers to insure fully powered batteries at all times. Power supplies shall be supervised and indicate system trouble when the batteries are not capable of supplying power under demand.

H. Field devices (manual stations, horns, bells, strobes, smoke and heat detectors) shall

have four (4) screw terminals for wiring connections for a true four (4) wire system throughout. Do not T-tap to any device. All devices except smoke and heat detectors shall be red in color.

I. A floor plan map of the building shall be made and reference made to zone location

wording to geographic location within the building. The map shall be color coded and protected by a glassed frame securely fastened to the wall in the immediate area of the fire alarm panel. If an annunciator panel is used, a similar map shall be furnished and mounted in the immediate area of the annunciator.

J. Contractor shall submit plans to the AHJ for approval prior to installation. Comply with

all AHJ requirements at no additional cost to the contract. K. Existing fire alarm system shall be removed (except as otherwise indicated). Timing

of the demolition of the existing system shall be coordinated so that the building has a fully operational fire alarm system at all times when occupied by Owner. If necessary provide temporary wiring, connections or equipment in order to always have a fully functional system. Note that during specific times over summer break and other times when students are not present on campus, the fire alarm may be taken out of service. All times without a working fire alarm system shall be pre-planned and shut downs of the fire alarm system shall be scheduled with the Owner. Note that this can only occur at other than normally scheduled school times and allowing time for students to leave the building.

1.3 SYSTEM OPERATION A. Activation of any fire alarm station, fire sprinkler flow switch, heat detector or smoke

detector circuit shall cause the following to happen: 1. Sound a pre-recorded voice message audible alarm over all signals. (General

Alarm) Alarm shall continue sounding until manually silenced or reset at the panel.

2. Visual alarm signals shall flash.



3. Close all electrically held doors. 4. Light the control panel mounted red alarm lamp to indicate the zone initiating

the alarm. 5. Light the annunciator panel mounted red alarm lamp to indicate the zone

indicating the alarm. 6. Provide contact closure for Central Monitoring Station signal. 7. Shut down HVAC systems that are connected to the fire alarm system.

Generally, those systems have duct smoke detection on the system ductwork. Existing HVAC systems that are have duct smoke detection on the old fire alarm system shall be provided with new duct smoke detection as part of the new fire alarm system and shall be controlled by the fire alarm system to shut down all fans (and close dampers when so equipped) upon sensing of smoke by the duct smoke detectors.

B. Activation of any HVAC duct smoke detector circuit shall cause the following to

happen: 1. Open the holding coil circuit to all HVAC fan starters in the building. 2. Sound a audible alarm over all signals. (General Alarm) Alarm shall continue

sounding until manually silenced or reset at the panel. 3. Visual alarm signals shall flash. 4. Close all electrically held doors. 5. Light the control panel mounted red alarm lamp to indicate the zone initiating

the alarm. 6. Light the annunciator panel mounted red alarm lamp to indicate the zone

indicating the alarm. 7. Provide contact closure for Central Monitoring Station signal. 8. HVAC fans shall be capable of being started or stopped from the FACP. C. The system shall be fully supervised and cause the following to happen: 1. When a ground fault occurs within the fire alarm panel, it shall illuminate the

panel (amber) ground fault lamp. Also, a local sounding device within the panel only shall sound, indicating a trouble condition.

2. When a ground fault occurs within zone or signal circuit wiring, the amber zone or circuit module lamp shall illuminate indicating which zone or circuit the ground fault occurred. Also, a local sounding device within the panel only shall sound, indicating a trouble condition.

3. When an open circuit occurs within zone or signal circuit wiring, the amber zone or circuit module lamp shall illuminate, indicating which zone or circuit the open occurred, as well as the system trouble amber lamp. Also, a local sounding device within the panel only shall sound, indicating a trouble condition.

4. When the battery backup supply has become inadequate to power the system, the system trouble amber lamp shall illuminate. Also, a local sounding device within the panel only shall sound, indicating a trouble condition.

5. Indication shall be given at the fire alarm panel when A.C. power to the fire alarm panel has been removed.

D. Elevator capture and shut down shall be activated by elevator lobby and machine

room smoke and thermal detectors in accordance with existing system operation and the requirements of the State of Arizona Elevator Inspector.



1.4 SUBMITTALS A. Submit for approval complete shop drawings for system. This to include drawings of

panel layout, component list, and system wiring diagram prepared by equipment supplier for submittal to AHJ. Submit shop drawings to Architect prior to making submittal to AHJ. Catalog cuts only are not acceptable. Shop drawings prepared by Nicet Level 3 (minimum) or an Arizona Registered Electrical or Fire Protection Engineer.

B. As part of Maintenance and Operating Instructions, include schematic wiring

diagrams and parts lists for all components and assemblies. C. Submittals shall be in accordance with Division 1 and Section 260500 requirements. PART 2 PRODUCTS 2.0 APPROVED MANUFACTURERS A. The catalog numbers listed are Notifier by Honeywell and indicate design, quality and

type of material as well as operating characteristics. Provide exact manufacturer and type as indicated. Amphitheater Public Schools has in-house maintenance of fire alarm systems and standardization of equipment is required for continued maintenance of the equipment.

2.1 Main Fire Alarm Control Panel or Network Node:

A. Main FACP or network node shall be a Notifier by Model NFS2-640 and shall contain a

microprocessor based Central Processing Unit (CPU) and power supply in an economical space saving single board design. The CPU shall communicate with and control the following types of equipment used to make up the system: intelligent addressable smoke and thermal (heat) detectors, addressable modules, printer, annunciators, and other system controlled devices.

B. When node has only one SLC, type NFS2-320 panel may be utilized. 2.2 System Capacity and General Operation

A. The FACP shall be capable of communicating on Noti-Fire-Net over a Local Area

Network (LAN) or Wide Area Network (WAN) utilizing a peer-to-peer, inherently regenerative communication format and protocol. The network shall support communication speed up to 100 Mb and support up to 200 panels / nodes per network.

B. Each network node shall provide, or be capable of 318 intelligent / addressable devices

per SLC loop.The Notification Appliance Circuits shall be programmable to Synchronize with System Sensor, Gentex and Wheelock Notification Appliances.

C. The system shall include a full featured operator interface control and annunciation

panel that shall include a backlit Liquid Crystal Display (LCD), individual color coded system status LEDs, and an alphanumeric keypad with easy touch rubber keys for the field programming and control of the fire and gas detection system.



D. The system shall be programmable, configurable, and expandable in the field without the need for special tools, PROM programmers or PC based programmers. It shall not require replacement of memory ICs to facilitate programming changes.

E. The system shall allow the programming of any input to activate any output or group of

outputs. Systems that have limited programming (such as general alarm), have complicated programming (such as a diode matrix), or require a laptop personal computer are not considered suitable substitutes.

F. The FACP shall support up to 20 logic equations, including "and," "or," and "not," or time

delay equations to be used for advanced programming. Logic equations shall require the use of a PC with a software utility designed for programming.

G. The FACP or each network node shall provide the following features:

1. Drift compensation to extend detector accuracy over life. Drift compensation shall

also include a smoothing feature, allowing transient noise signals to be filtered out. 2. Detector sensitivity test, meeting requirements of NFPA 72. 3. Maintenance alert, with two levels (maintenance alert/maintenance urgent), to warn

of excessive smoke detector dirt or dust accumulation. 4. Up to nine sensitivity levels for alarm, selected by detector. The alarm level range

shall be 0.5 to 2.35 percent per foot for photoelectric detectors, 0.5 to 2.5 percent per foot for ionization detectors,, 0.5 to 4.0 percent per foot for acclimate detectors and 1.0 to 4.0 percent per foot for multi-criteria (IntelliQuad and IntelliQuad PLUS) detectors The system shall also support sensitive advanced detection laser detectors with an alarm level range of .02 percent per foot to 2.0 percent per foot. The system shall also include up to nine levels of Pre-alarm, selected by detector, to indicate impending alarms to maintenance personnel.

5. The ability to display or print system reports. 6. Alarm verification, with counters and a trouble indication to alert maintenance

personnel when a detector enters verification 20 times. 7. PAS presignal, meeting NFPA 72 requirements. 8. Self optimizing pre-alarm for advanced fire warning, which allows each detector to

learn its particular environment and set its prealarm level to just above normal peaks.

9. Cross zoning with the capability of counting: two detectors in alarm, two software zones in alarm, or one smoke detector and one thermal detector.

10. Control-by-time for non-fire operations, with holiday schedules. 11. Day/night automatic adjustment of detector sensitivity. 12. Device blink control for sleeping areas. 13. The FACP shall be capable of coding main panel node notification circuits in March

Time (120 PPM), Temporal (NFPA 72 A-2-2.2.2), and California Code. Panel notification circuits (NAC 1,2,3 and 4) shall also support Two-Stage operation, Canadian Dual Stage (3 minutes) and Canadian Dual Stage (5 minutes). Two stage operation shall allow 20 Pulses Per Minute (PPM) on alarm and 120 PPM after 5 minutes or when a second device activates. Canadian Dual stage is the same as Two-Stage except will only switch to second stage by activation of Drill Switch 3 or 5 minute timer. The panel shall also provide a coding option that will synchronize specific strobe lights designed to accept a specific "sync pulse."

14. Network Communication 15. For flexibility and to ensure program validity, an optional Windows(TM) based



program utility shall be available. This program shall be used to off-line program the system with batch upload/download, and have the ability to upgrade the manufacturers (FLASH) system code changes. This program shall also have a verification utility, which scans the program files, identifying possible errors. It shall also have the ability to compare old program files to new ones, identifying differences in the two files to allow complete testing of any system operating changes. This shall be in compliance with the NFPA 72 requirements for testing after system modification. a. This utility shall provide the ability to create and print NFPA style Test and

Inspection reports b. This utility shall provide the ability to create and print Device Maintenence

information 16. The 80-character display keypad shall be an easy to use QWERTY type keypad,

similar to a PC keyboard. This shall be part of the standard system and have the capability to command all system functions, entry of any alphabetic or numeric information, and field programming. Two different password levels shall be provided to prevent unauthorized system control or programming.

17. When configured with an optional 640-character display the display shall use 10 "soft" keys for screen navigation or to accomplish dedicated programming functions. Full programming access shall require use of a laptop and the proper programming utility. With the 640 display option the system shall support distributed audio amplifiers on the digital audio loop of the Digital Voice Command.

H. Signaling Line Circuits (SLC)

1. Each FACP or FACP network node shall support up to two SLCs. Each SLC

interface shall provide power to and communicate with up to 159 intelligent detectors (onization, photoelectric, multi-criteria, thermal, laser, fire/CO) and 159 intelligent modules (monitor, control, relay, releasing) for a loop capacity of 318 devices. The addition of the optional second loop shall double the device capacity, supporting a total of 636 devices. Each SLC shall be capable of NFPA 72 Style 4, Style 6, or Style 7 (Class A or B) wiring.

2. CPU shall receive analog information from all intelligent detectors to be processed to determine whether normal, alarm, prealarm, or trouble conditions exist for each detector. The software shall automatically maintain the detector's desired sensitivity level by adjusting for the effects of environmental factors, including the accumulation of dust in each detector. The analog information shall also be used for automatic detector testing and for the automatic determination of detector maintenance requirements.

I. Serial Interfaces

1. The system shall include two serial EIA-232 interfaces. Each interface shall be a

means of connecting UL Listed Information Technology Equipment (ITE) peripherals. a. EIA-232 interface shall be used to connect an UL-Listed 40 or 80 column

printer. Printers that are not UL-Listed are not considered acceptable substitutes.



b. The system shall include an EIA-485 port for the serial connection of optional annunciators and remote LCD displays.

c. The EIA-485 interface may be used for network connection to a proprietary-receiving unit.

J. Digital Voice Command Center

1. The Digital Voice Command Center located with the FACP, shall contain all equipment required for all audio control, emergency telephone system control, signaling and supervisory functions. This shall include speaker zone indication and control, telephone circuit indication and control, digital voice units, microphone and main telephone handset. The DVC shall support up to 8 channels of voice when configured with Digital Audio Amplifiers and 4 channels of voice when employing the optional analog output card. Each DVC shall support up to 32 digital audio amplifiers.

2. Function: The Voice Command Center equipment shall perform the following functions: a. Operate as a supervised multi-channel emergency voice communication

system. b. Operate as a two-way emergency telephone system control center. Audibly and visually annunciate the active or trouble condition of every

speaker circuit and emergency telephone circuit. c. Audibly and visually annunciate any trouble condition for digital tone and

voice units required for normal operation of the system. d. Provide all-call Emergency Paging activities through activation of a single

control switch. e. As required, provide vectored paging control to specific audio zones via

dedicated control switches. f. Provide a factory recorded "library" of voice messages and tones in standard

WAV. File format, which may be edited and saved on a PC running a current Windows® operating system.

g. Provide a software utility capable of off-line programming for the DVCoperation and the audio message files. This utility shall support the creation of new programs as well as editing and saving existing program files. Uploading or downloading the DVC shall not inhibit the emergency operation of other nodes on the fire alarm network.

h. Support an optional mode of operation with four analog audio outputs capable of being used with UL 864 fire-listed analog audio amplifiers and SLC controlled switching.

i. The Digital Voice Command shall be modular in construction, and shall be capable of being field programmable without requiring the return of any components to the manufacturer and without requiring use of any external computers or other programming equipment.

j. The Digital Voice Command and associated equipment shall be protected against unusually high voltage surges or line transients.

3. The emergency voice alarm communication system shall incorporate a Two-way

emergency telephone communication system. a. Two-way emergency telephone communication circuits shall be supervised



for open and short circuit conditions. b. Two-way emergency telephone (Fire Fighter Telephone) communication shall

be supported between the Digital Voice Audio Command Center and up to seven (7) remote Fire Fighter's Telephone locations simultaneously on a telephone riser.

c. Means shall be provided to connect FFT voice communications to the speaker circuits in order to allow voice paging over the speaker circuit from a telephone handset.

K. Audio Amplifiers

1. The Audio Amplifiers will provide Audio Power (@25 Volt RMS or 70 RMS ) for distribution to speaker circuits.

2. Multiple audio amplifiers may be mounted in a single enclosure, either to supply incremental audio power, or to function as an automatically switched backup amplifier(s).

3. The audio amplifier shall include an integral power supply, and shall provide built-in LED indicators for the following conditions: a. Earth Fault on DAP A (Digital Audio Port A) b. Earth Fault on DAP B (Digital Audio Port B) c. Audio Amplifier Failure Detected Trouble d. Active Alarm Bus input e. Audio Detected on Aux Input A f. Audio Detected on Aux Input B g. Audio Detected on Firefighter's Telephone Riser h. Receiving Audio from digital audio riser i. Short circuit on speaker circuit 1 j. Short circuit on speaker circuit 2 k. Short circuit on speaker circuit 3 l. Short circuit on speaker circuit 4 m. Data Transmitted on DAP A n. Data Received on DAP A o. Data Transmitted on DAP B p. Data Received on DAP B q. Board failure r. Active fiber optic media connection on port A (fiber optic media applications) s. Active fiber optic media connection on port B (fiber optic media applications) t. Power supply Earth Fault u. Power supply 5V present v. Power supply conditions - Brownout, High Battery, Low Battery, Charger

Trouble 4. The audio amplifier shall provide the following built-in controls:

a. Amplifier Address Selection Switches b. Signal Silence of communication loss annunciation Reset c. Level adjustment for background music d. Enable/Disable for Earth Fault detection on DAP A e. Enable/Disable for Earth Fault detection on DAP A f. Switch for 2-wire/4-wire FFT riser



5. Adjustment of the correct audio level for the amplifier shall not require any special

tools or test equipment. 6. Includes audio input and amplified output supervision, back up input, and

automatic switch over function, (if primary amplifier should fail). 7. System shall be capable of backing up digital amplifiers. 8. One-to-one backup shall be provided by either a plug-in amplifier card or a

designated backup amplifier of identical model as the primary amplifier. 9. One designated backup amplifier shall be capable of backing up multiple primary

amplifiers mounted in the same or adjacent cabinets. 10. Multi-channel operation from a single amplifier shall be supported by the addition of

an optional plug-in amplifier card. L. Audio Message Generator (Prerecorded Voice)/Speaker Control:

1. Each initiating zone or intelligent device shall interface with an emergency voice

communication system capable of transmitting a prerecorded voice message to all speakers in the building.

2. Actuation of any alarm initiating device shall cause a prerecorded message to sound over the speakers. The message shall be repeated four (4) times. Pre- and post-message tones shall be supported.

3. A built-in microphone shall be provided to allow paging through speaker circuits. 4. System paging from emergency telephone circuits shall be supported. 5. The audio message generator shall have the following indicators and controls to

allow for proper operator understanding and control: a. Lamp Test b. Trouble c. Off-Line Trouble d. Microphone Trouble e. Phone Trouble f. Busy/Wait g. Page Inhibited h. Pre/Post Announcement Tone

M. Controls with associated LED Indicators:

1. Speaker Switches/Indicators

a. The speaker circuit control switches/indicators shall include visual indication

of active and trouble status for each speaker circuit in the system. b. The speaker circuit control panel shall include switches to manually activate

or deactivate each speaker circuit in the system.

2. Emergency Two-Way Telephone Control Switches/Indicators a. The emergency telephone circuit control panel shall include visual indication

of active and trouble status for each telephone circuit in the system. b. The telephone circuit control panel shall include switches to manually activate

or deactivate each telephone circuit in the system.

N. Specific System Operations



1. Smoke Detector Sensitivity Adjust: A means shall be provided for adjusting the

sensitivity of any or all addressable intelligent detectors in the system from the system keypad. Sensitivity range shall be within the allowed UL window and have a minimum of 9 levels.

2. Alarm Verification: Each of the intelligent addressable smoke detectors in the system may be independently selected and enabled to be an alarm verified detector. The alarm verification delay shall be programmable from 0 to 60 seconds and each detector shall be able to be selected for verification. The FACP shall keep a count of the number of times that each detector has entered the verification cycle. These counters may be displayed and reset by the proper operator commands.

3. Point Disable: Any addressable device in the system may be enabled or disabled through the system keypad.

4. Point Read: The system shall be able to display or print the following point status diagnostic functions: a. Device status b. Device type c. Custom device label d. View analog detector values e. Device zone assignments

5. System History Recording and Reporting: The fire alarm control panel shall contain a history buffer that will be capable of storing up to 800 events. Up to 200 events shall be dedicated to alarm and the remaining events are general purpose. Systems that do not have dedicated alarm storage, where events are overridden by non-alarm type events, are not suitable substitutes. Each of these activations will be stored and time and date stamped with the actual time of the activation. The contents of the history buffer may be manually reviewed, one event at a time, or printed in its entirety. The history buffer shall use non-volatile memory. Systems that use volatile memory for history storage are not acceptable substitutes.

6. Automatic Detector Maintenance Alert: The fire alarm control panel shall automatically interrogate each intelligent detector and shall analyze the detector responses over a period of time. If any intelligent detector in the system responds with a reading that is above or below normal limits, then the system will enter the trouble mode, and the particular detector will be annunciated on the system display, and printed on the optional printer. This feature shall in no way inhibit the receipt of alarm conditions in the system, nor shall it require any special hardware, special tools or computer expertise to perform.

7. Pre-Alarm Function: The system shall provide two levels of pre-alarm warning to give advance notice of a possible fire situation. Both pre-alarm levels shall be fully field adjustable. The first level shall give an audible indication at the panel. The second level shall give an audible indication and may also activate control relays. The system shall also have the ability to activate local detector sounder bases at the pre-alarm level, to assist in avoiding nuisance alarms.

8. Software Zones: The FACP shall support 142 independent programmable software zones

9. The fire alarm control panel shall include a walk test feature. It shall include the ability to test initiating device circuits and notification appliance circuits from the field without returning to the panel to reset the system. Operation shall be as



follows: a. Alarming an initiating device shall activate programmed outputs, which are

selected to participate in walk test, for 3 seconds. b. Introducing a trouble into the initiating device shall activate the programmed

outputs for 8 seconds. c. All devices tested in walk test shall be recorded in the history buffer.

10. Multiple agent releasing zones: The system shall support up to 10 releasing zones to protect against 10 independent hazards. Releasing zones shall provide up to three cross-zone and four abort options to satisfy any local jurisdiction requirements.

11. Mass Notification Override:The system shall be UL 2572 listed for Mass

Notification and shall be capable, based on the Risk Analysis, of being programmed so that Mass Notification/Emergency Communications events take precedence over fire alarm events.

O. Conventional Aspirating Detection

1. An optional air aspiration detection system shall be available. 2. The aspirating system shall support multiple sensitivity settings. 3. The aspirating system shall operate from 24 VDC. 4. The aspirating system shall provide alarm and trouble relays used to activate a fire

alarm control panel.

P. Aspiration System Interface:

1. The system shall be capable of supporting Interface Modules for integrating Vesda

Aspiration detectors into SLC loop of the fire alarm control panel. The Interface Module shall support up to 19 detectors detectors, each SLC loop shall support one interface module.

Q. High Level Aspiration System Interface:

1. The system shall be capable of supporting a High Level Interface for Vesda

Aspirating Detection Systems. The interface shall support up to 100 detectors and allow the fire alarm network to monitor and control events on the aspiration system.

R. Portable Emergency Telephone Handset Jack

1. Portable emergency telephone handset jacks shall be flush mounted on stainless

steel plates as indicated on the plans. Jacks shall be approved for emergency telephone system application.

2. Insertion of a portable handset plug into a jack shall send a signal to the fire command center, which shall audibly and visually indicate the on-line condition, and shall sound a "ring" indication in the handset.

3. The two-way emergency telephone system shall support a minimum of seven (7) handsets on line without degradation of the signal.



S. Fixed Emergency Telephone Handset 1. The telephone cabinet shall be painted red and clearly labeled as "Emergency

Telephone." The cabinets shall be located where shown on drawings. 2. The handset cradle shall have a switch connection so that lifting the handset off of

the cradle shall send a signal to the fire command center, which shall audibly and visually indicate its on-line (off-hook) condition.

3. On activating the remote phone, the phone earpiece shall sound a telephone ring signal until the master handset is lifted.

4. The two-way emergency telephone system shall support a minimum of seven (7) handsets on line without degradation of the signal.

T. All interfaces and associated equipment are to be protected so that they will not be

affected by voltage surges or line transients consistent with UL standard 864. U. Communicators

1. The UDACT shall be compact in size, mounting in a standard module position of

the fire alarm control cabinet. Optionally, the UDACT shall have the ability for remote mounting, up to 6,000 feet from the fire alarm control panel. The wire connections between the UDACT and the control panel shall be supervised with one pair for power and one pair for multiplexed communication of overall system status. Systems that utilize relay contact closures are not acceptable.

2. The UDACT shall include connections for dual telephone lines (with voltage detect), per UL/NFPA/FCC requirements. It shall include the ability for split reporting of panel events up to two different telephone numbers.

The UDACT shall be capable of transmitting events in 4+2, SIA, and Contact ID. Communication shall include vital system status such as:

a. Independent Zone (Alarm, trouble, non-alarm, supervisory) b. Independent Addressable Device Status c. AC (Mains) Power Loss d. Low Battery and Earth Fault e. System Off Normal f. 12 and 24 Hour Test Signal g. Abnormal Test Signal (per UL requirements) h. EIA-485 Communications Failure i. Phone Line Failure

3. The UDACT shall support independent zone/point reporting when used in the Contact ID format. In this format the UDACT shall support transmission of up to 3,064 points. This enables the central station to have exact details concerning the origin of the fire or response emergency.

4. The UDACT shall be capable of being programmed with the same programming utility as the host FACP, and saved, edited and uploaded and downloaded using the utility. UDACT shall be capable of being programmed online or offline. The programming utility shall also support upgrading UDACT operating firmware.

5. The UDACT shall be capable of generating Central Station reports providing detailed programming information for each point along with the central station point address.

6. An IP or IP/GSM Communicator option shall be available to interface to the



UDACT and be capable of transmitting signals over the internet/intranet or Cellular (GSM) network to a compatible receiver.

V. Smoke Control Annunciator

1. On/Auto/Off switches and status indicators (LEDS) shall be provided for monitoring

and manual control of each fan, damper, HVAC control unit, stairwell pressurization fan, and smoke exhaust fan. To ensure compliance the units supplied shall meet the following UL categories: UUKL, PAZX, UDTZ, QVAX as well as the requirements of NFPA 90A, HVAC, and NFPA 92A & 92B, Smoke Control. The control System shall be field programmable for either 90A operation or 92A/B operation to allow for future use and system expansion.

2. The OFF LED shall be Yellow, the ON LED shall be green, the Trouble/Fault LED shall be Amber/Orange for each switch. The Trouble/Fault indicator shall indicate a trouble in the control and/or monitor points associated with that switch. In addition, each group of eight switches shall have two LEDS and one momentary switch which allow the following functions: An Amber LED to indicate an OFF-NORMAL switch position, in the ON or OFF position; A Green LED to indicate ALL AUTO switch position; A Local Acknowledge/Lamp Test momentary switch.

3. Each switch shall have the capability to monitor and control two addressable inputs and two addressable outputs. In all modes, the ON and OFF indicators shall continuously follow the device status not the switch position. Positive feedback shall be employed to verify correct operation of the device being controlled. Systems that indicate on/off/auto by physical switch position only are not acceptable.

4. All HVAC switches (i.e., limit switches, vane switches, etc.) shall be provided and installed by the HVAC contractor.

5. It shall be possible to meet the requirements mentioned above utilizing wall

mounted custom graphic.

2.3 Gateway & Webserver Options

A. Common Alerting Protocol (CAP) Gateway: The system shall support an optional CAP

Gateway (Common Alerting Protocol). The CAP Gateway translates fire system messages to industry standard CAP messages for integration with CAP-compliant clients. A CAP gateway shall be available from the fire alarm control panel manufacturer.

B. LEDSIGN Gateway: The system shall support an optional and proprietary LEDSIGN

Gateway to interface to LED signs that will automatically display emergency messages. The signs shall be capable of storing up to 100 messages that can be activated via system programming with the ability to be manually overridden. The Sign Gateway shall support up to 10 independent signs, each sign capable of playing an independent message. Multiple LEDSIGN Gateways can be used in network applications. An LEDSIGN gateway shall be available from the fire alarm control panel manufacturer.

C. BACnet Interface Gateway: The system shall be capable of being interfaced with

BACNet compliant clients. A BACnet interface supporting BACnet/IP communication shall be available from the fire alarm control panel manufacturer.

D. MODbus Interface Gateway: The system shall be capable of being interfaced with



MODbus compliant clients. A MODbus interface supporting MODbus/TCP communication shall be available from the fire alarm control panel manufacturer.

E. Noti-Fire-Net Gateway: The system shall support an IP based gateway to enable the

panel or local Noti-Fire-Net to be connected to an ONYXWorks workstation via the Internet or Intranet. This gateway shall also support the ability to integrate the system to an interactive firefighter’s display. The Noti-Fire-Net Gateway shall be available from the fire alarm control manufacturer.

F. Webserver: The system shall support a webserver allowing remote connection via the

Internet or Intranet. Authorized users will have the ability to view panel/network history, event status and device properties. The webserver shall also support sending event information via email or text to up to 50 registered users, the webserver shall be available from the fire alarm control panel manufacturer.

G. Web Portal Interface: The system shall be capable of being interfaced with a web portal

to integrate with Inspection and Service Manager utilities. The web portal and inspection and service manager utilities shall be available from the fire alarm control panel manufacturer.

2.4 System Components - Addressable Devices

A. Addressable Devices - General

1. Addressable devices shall use simple to install and maintain decade, decimal

address switches. Devices shall be capable of being set to an address in a range of 001 to 159.

2. Addressable devices, which use a binary-coded address setting method, such as a DIP-switch, are not an allowable substitute. Addressable devices that require the address be programmed using a special tool or programming utility are not an allowable substitute.

3. Detectors shall be intelligent (analog) and addressable, and shall connect with two wires to the fire alarm control panel Signaling Line Circuits.

4. Addressable smoke and thermal detectors shall provide dual alarm and power/polling LEDs. Both LEDs shall flash green under normal conditions, indicating that the detector is operational and in regular communication with the control panel, and both LEDs shall be placed into steady red illumination by the control panel, indicating that an alarm condition has been detected. If required, the LED flash shall have the ability to be removed from the system program. An output connection shall also be provided in the base to connect an external remote alarm LED.

5. The fire alarm control panel shall permit detector sensitivity adjustment through field programming of the system. The panel on a time-of-day basis shall automatically adjust sensitivity.

6. Using software in the FACP, detectors shall automatically compensate for dust accumulation and other slow environmental changes that may affect their performance. The detectors shall be listed by UL as meeting the calibrated sensitivity test requirements of NFPA Standard 72.

7. The detectors shall be ceiling-mount and shall include a separate twist-lock base with tamper proof feature. Base options shall include a sounder base with a built-in (local) sounder rated at 85 DBA minimum, a relay base and an isolator base



designed for Style 7 applications. The system shall also support an intelligent programmable sounder base, the programmable sounder base shall be capable of providing multiple tones based on programming and at a minimum be capable of providing a Temp-4 tone for CO (Carbon Monoxide) activation and a Temp-3 tone for fire activations and be capable of being synchronized with other programmable sounder bases and common area notification appliances; 85 DBA minimum.

8. The detectors shall provide a test means whereby they will simulate an alarm condition and report that condition to the control panel. Such a test may be initiated at the detector itself (by activating a magnetic switch) or initiated remotely on command from the control panel.

9. Detectors shall also store an internal identifying type code that the control panel shall use to identify the type of device (ION, PHOTO, THERMAL).

10. Detectors will operate in an analog fashion, where the detector simply measures its designed environment variable and transmits an analog value to the FACP based on real-time measured values. The FACP software, not the detector, shall make the alarm/normal decision, thereby allowing the sensitivity of each detector to be set in the FACP program and allowing the system operator to view the current analog value of each detector.

11. Addressable devices shall store an internal identifying code that the control panel shall use to identify the type of device.

12. A magnetic test switch shall be provided to test detectors and modules. Detectors shall report an indication of an analog value reaching 100% of the alarm threshold.

13. Addressable modules shall mount in a 4-inch square (101.6 mm square), 2-1/8 inch (54 mm) deep electrical box. An optional surface mount Lexan enclosure shall be available.

B. Addressable Manual Fire Alarm Box (manual station)

1. Addressable manual fire alarm boxes shall, on command from the control panel,

send data to the panel representing the state of the manual switch and the addressable communication module status;NOTIFIER model # NBG-12LX. They shall use a key operated test-reset lock, and shall be designed so that after actual emergency operation, they cannot be restored to normal use except by the use of a key.

2. All operated stations shall have a positive, visual indication of operation and utilize a key type reset.

3. Manual fire alarm boxes shall be constructed of Lexan with clearly visible operating instructions provided on the cover. The word FIRE shall appear on the front of the stations in raised letters, 1.75 inches (44 mm) or larger.

C. Intelligent Photoelectric Smoke Detector: The intelligent photoelectric smoke detector

shall be NOTIFIER model # FSP-851 and shall use the photoelectric (light-scattering) principal to measure smoke density and shall, on command from the control panel, send data to the panel representing the analog level of smoke density.

D. Intelligent VIEW® Laser Photo Smoke Detector: The intelligent laser photo smoke

detector shall be a spot type detector, NOTIFIER model # FSL-751, that incorporates an extremely bright laser diode and an integral lens that focuses the light beam to a very small volume near a receiving photo sensor. The scattering of smoke particles shall activate the photo sensor.



1. The laser detector shall have conductive plastic so that dust accumulation is reduced significantly.

2. The intelligent laser photo detector shall have nine sensitivity levels and be sensitive to a minimum obscuration of 0.02 percent per foot.

3. The laser detector shall not require expensive conduit, special fittings or PVC pipe. 4. The intelligent laser photo detector shall support standard, relay, isolator and

sounder detector bases. 5. The laser photo detector shall not require other cleaning requirements than those

listed in NFPA 72. Replacement, refurbishment or specialized cleaning of the detector head shall not be required.

6. The laser photo detector shall include two bicolor LEDs that flash green in normal operation and turn on steady red in alarm.

E. Intelligent Ionization Smoke Detector: The intelligent ionization smoke detector shall be

NOTIFIER model # FSI-851 and shall use the dual-chamber ionization principal to measure products of combustion and shall, on command from the control panel, send data to the panel representing the analog level of products of combustion.

F. Intelligent Multi Criteria Acclimating Detector: The intelligent multi-criteria Acclimate®

Plus™ detector shall be an addressable device, NOTIFIER model # FAPT-851, that is designed to monitor a minimum of photoelectric and thermal technologies in a single sensing device. The design shall include the ability to adapt to its environment by utilizing a built-in microprocessor to determine its environment and choose the appropriate sensing settings. The detector design shall allow a wide sensitivity window, no less than 1 to 4% per foot obscuration. This detector shall utilize advanced electronics that react to slow smoldering fires and thermal properties all within a single sensing device. 1. The microprocessor design shall be capable of selecting the appropriate sensitivity

levels based on the environment type it is in (office, manufacturing, kitchen etc.) and then have the ability to automatically change the setting as the environment changes (as walls are moved or as the occupancy changes).

2. The intelligent multi criteria detection device shall include the ability to combine the signal of the thermal sensor with the signal of the photoelectric signal in an effort to react hastily in the event of a fire situation. It shall also include the inherent ability to distinguish between a fire condition and a false alarm condition by examining the characteristics of the thermal and smoke sensing chambers and comparing them to a database of actual fire and deceptive phenomena.

G. Intelligent Thermal Detectors: The intelligent thermal detectors shall be NOTIFIER FST-

series addressable devices rated at 135 degrees Fahrenheit (58 degrees Celsius) and have a rate-of-rise element rated at 15 degrees F (9.4 degrees C) per minute. A high heat thermal detector rated at 190 degrees Fahrenheit shall also be available. The thermal detectors shall connect via two wires to the fire alarm control panel signaling line circuit.

H. Intelligent Duct Smoke Detector: The smoke detector housing shall accommodate an

intelligent photoelectric detector that provides continuous analog monitoring and alarm verification from the panel. When sufficient smoke is sensed, an alarm signal is initiated at the FACP, and appropriate action taken to change over air handling systems to help prevent the rapid distribution of toxic smoke and fire gases throughout the areas served



by the duct system. The Intelligent Duct Smoke Detector shall support the installation of addressable Photoelectric detector capable or being tested remotely. The Intelligent Duct Detector housing shall be model # DNR(W) and the remote test capable photoelectric smoke detector shall be NOTIFIER model # FSP-851R.

I. IntelliQuad™ Advanced Multi-Criteria Intelligent Detector

1. Intelligent multi-criteria fire detector shall be a NOTIFIER model number FSC-851.

Smoke detector shall be an addressable intelligent multi-criteria smoke detector. The detector shall be comprised of four sensing elements, including a photoelectric (light-scattering) particulate sensor, an electrochemical carbon monoxide (CO) sensor, a daylight-filtered infrared sensor and solid state thermal sensor(s) rated at 135°F (57.2°C). The device shall be able to indicate distinct smoke and heat alarms.

2. The intelligent multi-criteria detection device shall include the ability to combine the signal of the photoelectric signal with other sensing elements in an effort to react quickly in the event of a fire situation. It shall also include the inherent ability to distinguish between a fire condition and a nuisance alarm condition. The product design shall be capable of selecting the appropriate sensitivity levels based on the environment type chosen by user in which it is installed (office, manufacturing, kitchen etc.) and then have the ability to automatically change the setting as the environment changes.

3. The detector shall be capable of automatically adjusting its sensitivity by means of drift compensation and smoothing algorithms. The detector shall be capable of automatically adjusting its sensitivity by means of drift compensation and smoothing algorithms. The device shall provide unique signals to indicate when 20% of the drift range is remaining, when 100% of drift range is used, and when there is a chamber fault to show unit requires maintenance.

4. The detector shall indicate CO trouble conditions including 6 months of sensor life remaining and sensor life has expired. The detector shall indicate a combined signal for any of the following: low chamber trouble, thermistor trouble, CO self test failure, IR self test failure, and freeze warning.

5. The detectors shall provide address-setting means on the detector head using rotary switches. Because of the possibility of installation error, systems that use binary jumpers or DIP switches to set the detector address are not acceptable. The detectors shall also store an internal identifying code that the control panel shall use to identify the type of detector. Systems that require a special programmer to set the detector address (including temporary connection at the panel) are labor intensive and not acceptable. Each detector occupies any one of at least 99 possible addresses on the signaling line circuit (SLC) loop. It responds to regular polls from the system and reports its type and status.

6. The detectors shall provide a test means whereby they will simulate an alarm condition and report that condition to the control panel. Such a test may be initiated at the detector itself (by activating a switch) or initiated remotely on command from the control panel. There are three test methods: functional magnet, smoke entry aerosol, or direct heat method.

7. The detectors shall provide two LEDs to provide 360° visibility. The LEDs are placed into steady red illumination by the control panel indicating that an alarm condition has been detected. An output connection shall also be provided in the base to connect an external remote alarm LED, sounder base, and / or relay base (optional accessories). The external remote alarm can be interconnected to other



sounder or relay bases for activating all devices in a space via a single alarming unit.

8. Two LEDs on the sensor are controlled by the panel to indicate sensor status. Coded signals, transmitted from the panel, can cause the LEDs to blink, latch on, or latch off. Refer to the control panel technical documentation for sensor LED status operation and expected delay to alarm.

9. The detectors shall be ceiling-mount and shall be plug-in mounted into a twist-lock base. These detectors shall be constructed of off-white UV resistant polymer and shall be detachable from the mounting base to simplify installation, service and maintenance. Mounting base wiring connections shall be made by means of SEMS screws. The detector shall allow pre-wiring of the base and the head shall be a plug-in type. Mounting base shall be mounted on junction box which is at least 1.5 inches (3.81 cm) deep. Mounting base shall be available to mount to standard junction boxes. Suitable boxes include: a. 4.0" (10.16 cm) square box with and without plaster ring. b. 4.0" (10.16 cm) octagonal box. c. 3.5" (8.89 cm) octagonal box. d. Single-gang box.

10. Meets Agency Standards a. ANSI/UL 268 -Smoke Detectors for Fire Alarm Signaling Systems b. CAN/ULC-S529- Smoke Detectors for Fire Alarm Systems c. FM 3230-3250- Smoke Actuated Detectors for Automatic Fire Alarm

Signaling J. IntelliQuad™ PLUS Advanced Multi-Criteria Intelligent Fire/CO Detector

1. Advanced Multi-Criteria Fire/CO detector shall be NOTIFIER model # FCO-851

and shall be an addressable advanced multi-criteria smoke detector with a separate signal for carbon monoxide (CO) detection per UL 2075 standards.

2. The detector shall be comprised of four sensing elements, including a photoelectric

(light-scattering) particulate sensor, an electrochemical CO sensor, a daylight-filtered infrared (IR) sensor and solid state thermal sensor(s) rated at 135°F (57.2°C). The device shall be able to indicate distinct smoke and heat alarms.

3. The advanced multi-criteria detection device shall include the ability to combine the

signal of the photoelectric signal with other sensing elements in order to react quickly in the event of a fire situation. It shall also include the inherent ability to distinguish between a fire condition and a nuisance alarm condition. The detector shall be capable of selecting the appropriate sensitivity levels based on the environment type (office, manufacturing, kitchen, etc.) in which it is installed, and then have the ability to automatically change the setting as the environment changes.

4. The CO detector component shall be capable of a functional gas test using a

canned test agent to test the functionality of the CO sensing cell. 5. The detector shall be capable of automatically adjusting its sensitivity by means of

drift compensation and smoothing algorithms. The device shall provide unique



signals to indicate when 20 percent of the drift range is remaining, when 100 percent of drift range is used, and when there is a chamber fault to show the unit requires maintenance.

6. The detector shall indicate CO trouble conditions, including six months of sensor life remaining and sensor life has expired. The detector shall indicate a combined signal for any of the following: low chamber trouble, thermistor trouble, CO self test failure, IR self test failure, and freeze warning.

7. The detector shall provide address-setting means on the detector head using rotary switches. Because of the possibility of installation error, systems that use binary jumpers or DIP switches to set the detector address are not acceptable. The detector shall also store an internal identifying code that the control panel shall use to identify the type of detector. Systems that require a special programmer to set the detector address (including temporary connection at the panel) are labor intensive and not acceptable. Each detector occupies any one of at least 159 possible addresses on the signaling line circuit (SLC) loop. It responds to regular polls from the system and reports its type and status.

8. The detector shall provide a test means whereby it will simulate an alarm condition and report that condition to the control panel. Such a test may be initiated at the detector itself (by activating a switch) or initiated remotely on command from the control panel. There shall be four test methods: functional magnet, smoke entry aerosol, carbon monoxide aerosol or direct heat method.

9. The detector shall provide two LEDs to provide 360° visibility. The LEDs shall be placed into steady red illumination by the control panel indicating that an alarm condition has been detected. An output connection shall also be provided in the base to connect an external remote alarm LED. The detector must be capable of connecting to a sounder base that provides both temporal 3 and temporal 4 patterns for fire and CO alarm.

10. Two LEDs on the sensor shall be controlled by the panel to indicate sensor status. Coded signals, transmitted from the panel, shall cause the LEDs to blink, latch on, or latch off. Refer to the control panel technical documentation for sensor LED status operation and expected delay to alarm.

11. The detector shall be plug-in mounted into a twist-lock base. The detector shall be constructed of off-white, UV-resistant polymer and shall be detachable from the mounting base to simplify installation, service and maintenance. Mounting base wiring connections shall be made by means of SEMS screws. The detector shall allow pre-wiring of the base and the head shall be a plug-in type. The mounting base shall be mounted on a junction box that is at least 1.5 inches (3.81 cm) deep. The mounting base shall be available to mount to standard junction boxes. Suitable boxes include: a. 4.0" (10.16 cm) square box with and without plaster ring. b. 4.0" (10.16 cm) octagonal box. c. 3.5" (8.89 cm) octagonal box. d. Single-gang box. e. Double-gang box

12. Meets Agency Standards a. ANSI/UL 268 -Smoke Detectors for Fire Alarm Signaling Systems b. CAN/ULC-S529- Smoke Detectors for Fire Alarm Systems c. FM 3230-3250- Smoke Actuated Detectors for Automatic Fire Alarm



Signaling d. UL 2075 – Gas and Vapor Detector and Sensors – Systems Connected

K. Intelligent Addressable Aspiration Detector: The intelligent aspiration detector shall be NOTIFIER model # FSA-8000 an addressable aspiration detector that communicates directly with the fire alarm control panel via the SLC communication protocol, no modules or high level interfaces shall be required. The fire alarm control panel shall support up to thirty one intelligent aspiration detectors per SLC loop. The aspiration detector shall have dual source (blue LED and infra-red laser) optical smoke detection for a wide range of fire detection with enhanced immunity to nuisance particulates. The FACP shall be capable of monitoring and annunciating up to five smoke event thresholds and eleven trouble conditions. Each event threshold shall be capable of being assigned a discrete type ID at the FACP

L. Intelligent Addressable Reflected Beam Detector

1. The intelligent single-ended reflected beam smoke detector shall connect with two

wires to the fire alarm control panel signaling line circuit (SLC). The detectors shall consist of a transmitter/receiver unit and a reflector and shall send data to the panel representing the analog level of smoke density. The detector shall be capable of being tested remotely via a keyswitch; NOTIFIER model # FSB-200. Model # FSB-200S shall be equipped with an integral sensitivity test feature

M. Addressable Dry Contact Monitor Module

1. Addressable monitor modules shall be provided to connect one supervised IDC

zone of conventional alarm initiating devices (any N.O. dry contact device) to one of the fire alarm control panel SLCs. The addressable monitor module shall be NOTIFIER model # FMM-1 (Class A or B) or FMM-101 (Class B)

2. The IDC zone shall be suitable for Style D/Class A or Style B/Class B operation. An LED shall be provided that shall flash under normal conditions, indicating that the monitor module is operational and in regular communication with the control panel.

3. For difficult to reach areas, the monitor module shall be available in a miniature package and shall be no larger than 2-3/4 inch (70 mm) x 1-1/4 inch (31.7 mm) x 1/2 inch (12.7 mm). This version need not include Style D or an LED.

4. For multiple dry contact monitoring a module shall be available that provides 10 Style B or 5 Style D input circuits; NOTIFIER model # XP10-M.

N. Two Wire Detector Monitor Module

1. Addressable monitor modules shall be provided to connect one supervised IDC

zone of conventional 2-wire smoke detectors or alarm initiating devices (any N.O. dry contact device); NOTIFIER model # FZM-1.

2. The IDC zone may be wired for Class A or B (Style D or Style B) operation. An LED shall be provided that shall flash under normal conditions, indicating that the monitor module is operational and in regular communication with the control panel.

3. For multiple 2-wire smoke detector circuit monitoring a module shall be available that provides 6 Style B/Class A or 3 Style D/Class B input circuits; NOTIFIER model # XP6-MA



O. Addressable Control Module 1. Addressable control modules shall be provided to supervise and control the

operation of one conventional circuit of compatible Notification Appliances, 24 VDC powered, polarized audio/visual notification appliances; NOTIFIER model # FCM-1

2. The control module NAC may be wired for Style Z or Style Y (Class A/B) with a current rating of 2 Amps for Style Z and 3 Amps for Style Y;

3. Audio/visual power shall be provided by a separate supervised circuit from the main fire alarm control panel or from a supervised UL listed remote supply.

4. For multiple circuit control a module shall be available that provides 6 Style Y (Class B) or 3 Style Z (Class A) control circuits; NOTIFIER model # XP6-C.

P. Addressable Releasing Control Module

1. An addressable FlashScan releasing module shall be available to supervise and

control compatible releasing agent solenoids; NOTIFIER model # FCM-1-REL. 2. The module shall operate on a redundant protocol for added protection. 3. The module shall be configurable for Style Z or Style Y (Class A/B) and support

one 24 volt or two 12 volt solenoids. Q. Addressable Relay Module:

1. Addressable Relay Modules shall be available for HVAC control and other network

building functions; NOTIFIER model # FRM-1. 2. The module shall provide two form C relays rated at up to 3 Amps resistive and up

to 2.0 Amps inductive. 3. The relay coil shall be magnetically latched to reduce wiring connection

requirements, and to insure that 100% of all auxiliary devices energize at the same time on the same pair of wires.

4. For multiple relay control a module shall be available that provides 6 programmable Form-C relays; NOTIFIER model # XP6-R.

R. Addressable Two-In / Two-Out Monitor/Relay Module:

1. An addressable Two-In / Two-Out module shall be available; NOTIFIER model #

FDRM-1. 2. The two-in/two-out module shall provide two Class B/Style B dry-contact input

circuits and two independent Form-C relays rated at up to 3 Amps resistive and up to 2.0 Amps inductive.

S. Isolator Module: Isolator modules shall be provided to automatically isolate wire-to-wire

short circuits on an SLC Class A or Class B branch. The isolator module shall limit the number of modules or detectors that may be rendered inoperative by a short circuit fault on the SLC loop segment or branch. At least one isolator module shall be provided for each floor or protected zone of the building; NOTIFIER model # ISO-X.

1. If a wire-to-wire short occurs, the isolator module shall automatically open-circuit

(disconnect) the SLC. When the short circuit condition is corrected, the isolator module shall automatically reconnect the isolated section.

2. The isolator module shall not require address-setting, and its operations shall be totally automatic. It shall not be necessary to replace or reset an isolator module



after its normal operation. 3. The isolator module shall provide a single LED that shall flash to indicate that the

isolator is operational and shall illuminate steadily to indicate that a short circuit condition has been detected and isolated.

T. Smoke Control Annunciator

1. On/Auto/Off switches and status indicators (LEDS) shall be provided for monitoring

and manual control of each fan, damper, HVAC control unit, stairwell pressurization fan, and smoke exhaust fan. To ensure compliance the units supplied shall meet the following UL categories: UUKL, PAZX, UDTZ, QVAX as well as the requirements of NFPA 90A, HVAC, and NFPA 92A & 92B, Smoke Control. The control System shall be field programmable for either 90A operation or 92A/B operation to allow for future use and system expansion.

2. The OFF LED shall be Yellow, the ON LED shall be green, the Trouble/Fault LED shall be Amber/Orange for each switch. The Trouble/Fault indicator shall indicate a trouble in the control and/or monitor points associated with that switch. In addition, each group of eight switches shall have two LEDS and one momentary switch which allow the following functions: An Amber LED to indicate an OFF-NORMAL switch position, in the ON or OFF position; A Green LED to indicate ALL AUTO switch position; A Local Acknowledge/Lamp Test momentary switch.

3. Each switch shall have the capability to monitor and control two addressable inputs and two addressable outputs. In all modes, the ON and OFF indicators shall continuously follow the device status not the switch position. Positive feedback shall be employed to verify correct operation of the device being controlled. Systems that indicate on/off/auto by physical switch position only are not acceptable.

4. All HVAC switches (i.e., limit switches, vane switches, etc.) shall be provided and installed by the HVAC contractor.

5. It shall be possible to meet the requirements mentioned above utilizing wall mounted custom graphic.

U. SpectrAlert Advance Speakers

1. The Speaker appliance shall be System Sensor SpectrAlert Advance model

______ Speaker. The speaker shall be listed to UL 1480 for Fire Protective Signaling Systems. It shall be a dual-voltage transformer speaker capable of operation at 25.0 or 70.7 nominal Vrms. The speaker shall have a frequency range of 400 to 4,000 Hz and shall have an operating temperature between 32°F and 120°F. It shall mount to a 4 x 4 x 2 1/8-inch back box.

2. A universal mounting plate shall be used for mounting ceiling and wall speaker products. The notification appliance circuit and amplifier wiring shall terminate at the universal mounting plate.

3. Speakers shall be plug-in and shall have the ability to check wiring continuity via a shorting spring on the universal mounting plate. The shorting spring shall also provide tamper resistance via an open circuit if the device is removed. Speaker design shall isolate speaker components to reduce ground fault incidents.

4. The speaker shall have power taps (from ¼ watt to 2 watts) and voltage that are selected by rotary switches. All models shall have a maximum sound output of 86 dB at 10 feet and shall incorporate an open back construction.

5. All notification appliances shall be backward compatible.



Ceiling Speaker Wall Speaker

V. SpectrAlert Advance Speaker Strobes

1. The Speaker Strobe appliance shall be System Sensor SpectrAlert Advance model ______ Speaker Strobe. The speaker strobe shall be listed to UL 1971 and UL 1480 and be approved for fire protective signaling systems. It shall be a dual-voltage transformer speaker strobe capable of operation at 25.0 or 70.7 nominal Vrms. The speaker shall have a frequency range of 400 to 4,000 Hz and shall have an operating temperature between 32°F and 120°F. It shall mount to a 4 x 4 x 2 1/8-inch back box.

2. A universal mounting plate shall be used for mounting ceiling and wall speaker strobe products. The notification appliance circuit and amplifier wiring shall terminate at the universal mounting plate. Also, SpectrAlert Advance speaker strobes and the Sync•Circuit™ Module MDL3 accessory, if used, shall be powered from a non-coded notification appliance circuit output and shall operate on a nominal 12 or 24 volts (includes fire alarm panels with built in sync). When used with the Sync•Circuit Module MDL3, 12-volt rated notification appliance circuit outputs shall operate between 8.5 and 17.5 volts; 24-volt rated notification appliance circuit outputs shall operate between 16.5 to 33 volts. If the notification appliances are not UL 9th edition listed with the corresponding panel or power supply being used, then refer to the compatibility listing of the panel to determine maximum devices on a circuit.

3. Speaker strobes shall be plug-in and shall have the ability to check wiring continuity via a shorting spring on the universal mounting plate. The shorting spring shall also provide tamper resistance via an open circuit if the device is removed. Speaker strobe design shall isolate speaker components to reduce ground fault incidents.

4. The speaker strobe shall have power taps (from ¼ watt to 2 watts) and voltage that are selected by rotary switches. All models shall have a maximum sound output of 86 dB at 10 feet and shall incorporate an open back construction. The strobe shall consist of a xenon flash tube with associated lens/reflector system and operate on either 12V or 24V. The strobe shall also feature selectable candela output, providing options for 15 or 15/75 candela when operating on 12V and 15, 15/75,



30, 75, 110, or 115 when operating on 24V. The strobe shall comply with NFPA 72 and the Americans with Disabilities Act requirement for visible signaling appliances, flashing at 1 Hz over the strobe’s entire operating voltage range.

5. All notification appliances shall be backward compatible.

Ceiling Speaker Strobe Wall Speaker Strobe

6. Strobe lights shall meet the requirements of the ADA, UL Standard 1971and be fully synchronized.

2.5 LIGHTNING PROTECTION A. Provide lightning protection on all copper circuits entering control panel or annunciator

from separate building. 2.6 CONDUIT AND BOXES FOR FIELD DEVICES A. Conduit shall be as specified in Section 260500 for electrical work except that: 1. PVC shall not be used for any part of the fire alarm system run within or on the

building. New direct burial underground conduits outside of the building footprint shall utilize Schedule 80 PVC electrical conduit.

2. New EMT raceway shall be factory color coded RED color. 3. Do not use 1-hole straps for support of exposed. Use 2-hole straps or strut and

strut clamps; however, strut and strut clamps shall not be used where exposed below 8’-0” AFF.

4. For connections to smoke or heat detectors or similar equipment on suspended accessible ceilings the use of flexible metallic conduit shall be permitted in lengths not to exceed 6’ maximum.

B. Provide a green insulated 14AWG solid copper equipment grounding conductor in all

fire alarm conduits.



C. Boxes shall be as specified in Section 265000 for electrical work. Minimum size box shall be 4 inch square, 1-1/2 inch deep. See PART 3 of this section for additional requirements on box sizing and color coding.

1. Boxes installed exposed below 8’-0” AFF shall be cast metal type boxes with

conduit hubs (no knock-outs), such as FS/FD or ‘bell’ boxes. Provide screw-in hub plugs in all unused opening in such boxes.

2.7 TERMINAL STRIPS A. When required, terminal strips in junction boxes shall be as manufactured by Cinch-

Jones, or equivalent and shall be securely mounted to the junction box. 2.8 CONDUCTORS A. Conductors for system shall be 98% minimum conductivity copper. B. SLC, Audio and Fiber Optic cables shall be types as recommended by system

manufacturer. C. For 24V DC circuits use #14 AWG solid conductor. Stranded wire not acceptable.

Insulation for all circuits type "THHN". Do not use type "THHN or THWN" wire for underground circuits. Use West Penn Aqua Seal cable may for underground circuits. See PART 3 of this section for color coding.

D. For 120V AC circuits conductors shall be as specified in Section 260500.

PART 3 EXECUTION 3.1 INSTALLATION OF EQUIPMENT A. Installation shall be accomplished in a professional manner by qualified personnel

regularly engaged in and experienced in this type of work. 3.2 INSTALLATION OF CONDUIT AND JUNCTION BOXES A. All wiring shall be installed Class A in accordance with the AHJ’s requirements. This

requirement shall not prevent wiring of different zones or circuits to share conduits to the extent indicated on the drawings, but rather applies to the outgoing and incoming wires of the same zone or alarm circuit. Do not mix incoming and outgoing wires in the same conduit.

B. Conduit system shall be provided for all fire alarm wiring as indicated on the fire alarm

supplier’s shop drawings. When suitable for the purpose existing conduits may be re-used for the new fire alarm wiring.

C. Junction boxes shall be sized so that when covered, the wires occupy only 50% of the

box area. (Boxes must reasonably be capable of housing twice the number of wires.) D. All junction and pull boxes shall be painted red.



1. Painting of the box or back box shall be done prior to box installation, or the box shall be factory painted red.

2. Box covers in unfinished space and in accessible above ceiling spaces and similar spaces shall be red color, either field painted or factory painted.

3. Box covers for single gang and multi-gang device type flush boxes in finished spaces shall be stainless steel.

4. Box covers for sheet metal boxes installed in finished spaces shall be red finish. E. No junction box, pull box or auxiliary box shall be without cover. F. When more than eight (8) conductors are spliced in a box, provide a terminal strip.

For eight (8) or less conductors, wire nut splices are acceptable. G. Installation requirements of Section 260500 shall apply to this work. H. Raceways for fire alarm inside the building shall be all metallic. Do not use PVC or

any non-metallic raceway. Do not use Surface Metal Raceways (Wiremold or equal) for fire alarm work.

I. All raceways shall have electrical (ground) continuity back to the F.A.C.P. J. All back boxes for devices (pull stations, notification appliances, etc.) shall be

appropriate boxes as designed by manufacturer. (Extension boxes bolted to back boxes to achieve sufficient depth are not acceptable.)

3.3 FIELD WIRING INSTALLATION A. Install all system wiring in raceways per paragraph 3.2 and as indicated on the

drawings. B. When more than one zone or circuit occupies a junction or pull box, all conductors

shall be identified with zone numbers. C. Field wiring shall be color coded and be consistent throughout the entire installation.

Color coding shall be in the wire insulation and shall not be field marked by painting or tape banding other color conductors.

These colors shall be used: Red and Black = Notification Appliances (speakers, strobes and bells) Yellow and Blue = Initiating Devices (manual station, heat and smoke detectors) Orange and Brown = Flow and Tamper switches White and Violet = Auxiliary (door release/door latch release and HVAC

shutdown and annunciator) Green = Equipment ground D. Wire color code shall be White and Violet wires for any function other than Signal

Devices, Initiating devices, flow and tamper switches.



E. Any wire pulled from a spool and field installed either internal or external to the F.A.C.P. shall comply with the color coding requirements in the specifications and "C" above. Any wire used within the F.A.C.P. for interconnection shall not use the same colors as the field wiring unless approval from the Architect is obtained.

F. Wiring carrying line voltage (120V AC) and wiring carrying low voltage (24V AC or

DC) shall not share the same conduit. 3.4 INSTRUCTION TO OWNER A. Contractor shall provide instruction to Owner with regard to proper use and operation

of system. This to include not less than eight hours time with manufacturer/supplier's representative on site to demonstrate all aspects of the system.

3.5 WARRANTY A. Refer to Division 1. B. When manufacturer's standard warrantee exceeds the requirements stated in Division

1 the full manufacturer's warranty shall apply. 3.6 TESTING AND ACCEPTANCE A. The Authority Having Jurisdiction in conjunction with School District maintenance

personnel shall conduct a complete and thorough test to insure that the system will satisfy all the requirements of the NEC, NFPA-72, State Fire Code, as well as this specification.

1. The test and acceptance shall be scheduled at a time when students are not

present, and the least amount of interruption to staff personnel. 2. Due to the size of the Campus, testing may occur in multiple sessions scheduled at

different days and times to be mutually agreed upon by Owner and Contractor. 3. The AHJ may test the system separately from the Owner. 4. Contractor shall have trained personnel including installing electricians and

technicians from the fire alarm equipment manufacturer present at all testing sessions.

5. In the event that additional testing is required due to problems in the system, the Contractor shall be present for all necessary retesting sessions.

6. Note that acceptance of the Fire Alarm system by the AHJ shall not relieve the Contractor from any work required by the Contract. The acceptance of the system by the AHJ has no bearing on whether or not the Fire Alarm system work is accepted by the Owner.

B. After the AHJ and Owner’s maintenance personnel have been satisfied that the

installation meets all requirements, an instructional session shall be scheduled with the School Administration and office staff concerning the operation and the function of all controls.

C. The following test procedures will be performed: 1. Fire alarm system will be tested on battery operation (AC power removed).



2. All sprinkler flow switches will be tested to verify that they will create alarm condition and sound fire horns.

3. All sprinkler tamper switches will be tested to verify that they will create a trouble condition in the zone module.

4. At random, wiring to initiating and signaling circuits will be tested for ground faults. (Ground faults will be simulated to verify that the panel will detect them and indicate ground fault trouble condition.)

5. In every initiating active zone, wires will be completely separated from an initiating device to verify that the panel will indicate trouble; then alarm will be initiated from that same zone, from a different pull station to insure the fire horns will still sound.

6. In every signaling active zone, wires will be completely separated from the signaling device to verify that the panel will indicate trouble; then alarm will be initiated to insure that the remaining fire horns will still sound.

7. The annunciator panel will be tested for proper operation, and the wiring will be tested for supervision.

8. Any HVAC shutdown and door/latch release shall be tested to confirm proper operation.

9. The fire signaling module in the intercom will be tested to insure that it will sound over all speakers upon an alarm condition. It will also be tested to verify that it will silence when the fire panel is silenced with one switch activation and the panel not yet reset.

10. A visual inspection of conduit and wiring will be made (to insure conduit separation of loop wiring and no "T" taps exist). Also to insure all junction and pull boxes are covered and painted red.

D. It is the responsibility of the Contractor that previous testing and assurances from the

electrical, alarm, and sprinkler sub-contractors guarantee that these test procedures be satisfied.

E. The initial test and one additional test, if found to be necessary, are to be considered as

part of the installation. Any tests that are required thereafter, a charge of three hundred dollars per test will be charged to the Contractor. Any monies received shall be placed in the contingency fund.

END OF SECTION