amritsar specifications for modular kitchen...
TRANSCRIPT
GOLDEN TEMPLE - AMRITSARBILL OF QUANTITY FOR MODULAR KITCHEN EQUIPMENT
ITEM QTY DESCRIPTION UNIT AMOUNT
NO. RATEBASEMENT FLOORRECEIVING AREAR-10 3 DRAIN TROUGH WITH GRATINGR-15 1 DRAIN TROUGH WITH GRATINGFOOD & GENERAL STORE
GOLDEN TEMPLE
AMRITSAR
SPECIFICATIONS FOR
MODULAR KITCHEN EQUIPMENT
Dated: 12/08/2014
ARCHITECT
HABITAT ARCHITECTS 1777, MAHARAJ NAGAR, LDH.
CLIENT
SHIROMANI GURDWARA PARBANDHAK COMMITTEE.
INDIA - 1st & 2nd Floor, Doon Building, Plot No.230, Block A - 2, Sector - 17, Dwarka, New Delhi - 110078, Ph no: + 91 - 011 - 43505228/29
U.A.E - Dubai Airport Free Trade Zone, 3rd East Wing Building, 4th Floor, P.O Box- 54620, Dubai 54620, U.A.E, Ph no: +971-563738349
[email protected], www.hpgconsulting.com
GOLDEN TEMPLE - AMRITSARBILL OF QUANTITY FOR MODULAR KITCHEN EQUIPMENT
ITEM QTY DESCRIPTION UNIT AMOUNT
NO. RATEBASEMENT FLOORRECEIVING AREAR-10 3 DRAIN TROUGH WITH GRATINGR-15 1 DRAIN TROUGH WITH GRATINGFOOD & GENERAL STORE
GOLDEN TEMPLE
AMRITSAR
SPECIFICATIONS FOR
MODULAR KITCHEN EQUIPMENT
Dated: 12/08/2014
ARCHITECT
HABITAT ARCHITECTS 1777, MAHARAJ NAGAR, LDH.
CLIENT
SHIROMANI GURDWARA PARBANDHAK COMMITTEE.
INDIA - 1st & 2nd Floor, Doon Building, Plot No.230, Block A - 2, Sector - 17, Dwarka, New Delhi - 110078, Ph no: + 91 - 011 - 43505228/29
U.A.E - Dubai Airport Free Trade Zone, 3rd East Wing Building, 4th Floor, P.O Box- 54620, Dubai 54620, U.A.E, Ph no: +971-563738349
[email protected], www.hpgconsulting.com
GOLDEN TEMPLE - AMRITSARBILL OF QUANTITY FOR MODULAR KITCHEN EQUIPMENT
ITEM QTY DESCRIPTION UNIT AMOUNT
NO. RATEBASEMENT FLOORRECEIVING AREAR-10 3 DRAIN TROUGH WITH GRATINGR-15 1 DRAIN TROUGH WITH GRATINGFOOD & GENERAL STORE
GOLDEN TEMPLE
AMRITSAR
SPECIFICATIONS FOR
MODULAR KITCHEN EQUIPMENT
Dated: 12/08/2014
ARCHITECT
HABITAT ARCHITECTS 1777, MAHARAJ NAGAR, LDH.
CLIENT
SHIROMANI GURDWARA PARBANDHAK COMMITTEE.
INDIA - 1st & 2nd Floor, Doon Building, Plot No.230, Block A - 2, Sector - 17, Dwarka, New Delhi - 110078, Ph no: + 91 - 011 - 43505228/29
U.A.E - Dubai Airport Free Trade Zone, 3rd East Wing Building, 4th Floor, P.O Box- 54620, Dubai 54620, U.A.E, Ph no: +971-563738349
[email protected], www.hpgconsulting.com
Integrated Solution for Hospitality ProjectsAn ISO 9001:2000 Certified Company
MD. K. Eqpt /Specs GOLDEN TEMPLE - AMRITSAR Page- 2 of 41INDIA Sector -17, Dwarka, New Delhi -110078
www.hpgconsulting.com
GOLDEN TEMPLE - AMRITSARBILL OF QUANTITY FOR MODULAR KITCHEN EQUIPMENT
ITEM QTY DESCRIPTION UNIT AMOUNT
NO. RATEFS-07 1 SLOT CHANNEL / DRAIN RAILFS-13 2 SLOT CHANNEL / DRAIN RAILFS-16 2 DRAIN TROUGH WITH GRATINGGROUND FLOORHOT FOOD PREP AREAK-02 21 DRAIN TROUGH WITH GRATINGK-05 4 DRAIN TROUGH WITH GRATINGK-07 16 DRAIN TROUGH WITH GRATINGK-22 9 DRAIN TROUGH WITH GRATINGK-23 4 DRAIN TROUGH WITH GRATINGK-30 1 SLOT CHANNEL / DRAIN RAILK-38 2 DRAIN TROUGH WITH GRATINGPOT WASH AREAK-45 3 DRAIN TROUGH WITH GRATINGWASHING AREAK-52 2 SLOT CHANNEL / DRAIN RAILK-55 2 DRAIN TROUGH WITH GRATINGK-55A 1 DRAIN TROUGH WITH GRATINGK-56 39 DRAIN TROUGH WITH GRATINGK-56A 4 DRAIN TROUGH WITH GRATINGK-57 12 DRAIN TROUGH WITH GRATINGK-58 24 DRAIN TROUGH WITH GRATINGK-60 1 DRAIN TROUGH WITH GRATINGFIRST FLOORHOT FOOD PREP AREASK-02 3 DRAIN TROUGH WITH GRATINGSK-04 1 DRAIN TROUGH WITH GRATINGSK-07 1 SLOT CHANNEL / DRAIN RAILSK-10 1 DRAIN TROUGH WITH GRATINGPOT WASH AREASK-12 2 DRAIN TROUGH WITH GRATINGCOMMISSARY KITCHENCK-03 7 DRAIN TROUGH WITH GRATINGCK-07 1 DRAIN TROUGH WITH GRATINGCK-09 2 DRAIN TROUGH WITH GRATINGCK-14 2 SLOT CHANNEL / DRAIN RAIL
Integrated Solution for Hospitality ProjectsAn ISO 9001:2000 Certified Company
MD. K. Eqpt /Specs GOLDEN TEMPLE - AMRITSAR Page- 3 of 41INDIA Sector -17, Dwarka, New Delhi -110078
www.hpgconsulting.com
GOLDEN TEMPLE - AMRITSARBILL OF QUANTITY FOR MODULAR KITCHEN EQUIPMENT
ITEM QTY DESCRIPTION UNIT AMOUNT
NO. RATECK-16 2 DRAIN TROUGH WITH GRATINGCK-23 2 DRAIN TROUGH WITH GRATINGCK-25 4 DRAIN TROUGH WITH GRATINGSECOND FLOORCHAPATI MAKING AREACM-36 2 SLOT CHANNEL / DRAIN RAILCM-40 1 SLOT CHANNEL / DRAIN RAILCM-45 6 DRAIN TROUGH WITH GRATINGCM-50 4 DRAIN TROUGH WITH GRATINGCM-52 3 DRAIN TROUGH WITH GRATING
Integrated Solution for Hospitality ProjectsAn ISO 9001:2000 Certified Company
MD. K. Eqpt /Specs GOLDEN TEMPLE - AMRITSAR Page- 4 of 41INDIA Sector -17, Dwarka, New Delhi -110078
www.hpgconsulting.com
ITEM NO : R-10 DRAIN TROUGH GRATING
QUANTITY: 3SIZE
Width:550 mm
Depth:550 mm
Height:70 mm
CAPACITY
M.E.P REQUIREMENT SPECIFICATIONSPLUMBING : Removable S.S Grating of 304 0f suitable size with 25 mm
height. Grating with hairline finishing. Grating with 5mm thick for outside ring, 3mmthick for
interior section, Grating has to be slip-resistant for one side, Plain on the
other. Minimum Point Load: 150 kg per square meter. Spot welding not to be used. To be made in one piece/ parts to make it suitable for
lifting 70 mm Trough to be made with 16 Gauge AISI 304 SS. Trough to be provided with drain outlet at center or as
per site with all sides sloping towards drain outlet. Drain out let of the trough to have 16 gauge extension
flanges of 40 mm depth and 100 mm dia. for entry in thefloor drain.
Trough has to be fully welded with no gaps. Suitable to be for fitting with type of flooring coming at
site.
Cold ∅ NAHot ∅ NAWaste ∅ 4” Floor
DrainELECTRIC :Power NAVoltage NAGas:BTU NACon. ∅ NA mm
ACCESSORIES: Silt Basket, With NBR infill (Polymer fill for bend), O ring for fittinginto drain system
SPECIAL NOTE: Trough to be provided as per the flooring type coming at site.
PREFERRED MAKE AND MODEL IN ALPHABETICAL ORDERACO BLUCHER DSSCUSTOM BUILT CUSTOM BUILT CUSTOM BUILT
Integrated Solution for Hospitality ProjectsAn ISO 9001:2000 Certified Company
MD. K. Eqpt /Specs GOLDEN TEMPLE - AMRITSAR Page- 5 of 41INDIA Sector -17, Dwarka, New Delhi -110078
www.hpgconsulting.com
ITEM NO : R-15 DRAIN TROUGH GRATING
QUANTITY: 1SIZE
Width:3000 mm
Depth:300 mm
Height:70 mm
CAPACITY
M.E.P REQUIREMENT SPECIFICATIONSPLUMBING : Removable S.S Grating of 304 0f suitable size with 25 mm
height. Grating with hairline finishing. Grating with 5mm thick for outside ring, 3mmthick for
interior section, Grating has to be slip-resistant for one side, Plain on the
other. Minimum Point Load: 150 kg per square meter. Spot welding not to be used. To be made in one piece/ parts to make it suitable for
lifting 70 mm Trough to be made with 16 Gauge AISI 304 SS. Trough to be provided with drain outlet at center or as
per site with all sides sloping towards drain outlet. Drain out let of the trough to have 16 gauge extension
flanges of 40 mm depth and 100 mm dia. for entry in thefloor drain.
Trough has to be fully welded with no gaps. Suitable to be for fitting with type of flooring coming at
site.
Cold ∅ NAHot ∅ NAWaste ∅ 4” Floor
DrainELECTRIC :Power NAVoltage NAGas:BTU NACon. ∅ NA mm
ACCESSORIES: Silt Basket, With NBR infill (Polymer fill for bend), O ring for fittinginto drain system
SPECIAL NOTE: Trough to be provided as per the flooring type coming at site.
PREFERRED MAKE AND MODEL IN ALPHABETICAL ORDERACO BLUCHER DSSCUSTOM BUILT CUSTOM BUILT CUSTOM BUILT
Integrated Solution for Hospitality ProjectsAn ISO 9001:2000 Certified Company
MD. K. Eqpt /Specs GOLDEN TEMPLE - AMRITSAR Page- 6 of 41INDIA Sector -17, Dwarka, New Delhi -110078
www.hpgconsulting.com
ITEM NO : FS-07 SLOT CHANNEL / DRAIN RAIL
QUANTITY: 1SIZE
Width:1500 mm
Depth:50+200 mm
Height:70 mm
CAPACITY
M.E.P REQUIREMENT SPECIFICATIONSPLUMBING : Channels:
Material: 2mm. thick Stainless Steel Grade: 304 PicklePassivated. Leveling bolts to adjust height. Inclusive of foul airtrap, silt basket, drainage ring (O-ring)Gully: Corrosion protected deep-drawn gully body stainlesssteel grade 304. Pickle Passivated. Gully body outer diameter is178mm, with vertical outlet size 110 mm diameters.Grating for Gully top: Anti-slip electro-polished stainless steelgrating, with load bar size 30mm X 2mm.Load Class L,according to EN1253. Gratings are made by arc-welding (notspot welding)Side bottom Inlets: 50mm Socketed Side inlet made ofStainless Steel & EPDM seal for taking indirect waste fromsurrounding kitchen equipment if any.
Cold ∅ NAHot ∅ NAWaste ∅ 4” Floor
DrainELECTRIC :Power NAVoltage NAGas:BTU NACon. ∅ NA mm
ACCESSORIES: To drain heavy waste water via in-direct drainage from foodservice equipment and kitchen floor.
SPECIAL NOTE: Modular structure for gratings with smaller individual grating to fitthe size of the channel to avoid work injury from being too heavyto bulky to handle
Slab Penetration: Requires 110mm dia waste drain connection. Requires floor cut-out and recess.Refer to WPR drawings. Location/number of drain pipes from food service equipments to becoordinated with MEP Consultant.PREFERRED MAKE AND MODEL IN ALPHABETICAL ORDERACOCUSTOM BUILT
Integrated Solution for Hospitality ProjectsAn ISO 9001:2000 Certified Company
MD. K. Eqpt /Specs GOLDEN TEMPLE - AMRITSAR Page- 7 of 41INDIA Sector -17, Dwarka, New Delhi -110078
www.hpgconsulting.com
ITEM NO : FS-13 SLOT CHANNEL / DRAIN RAIL
QUANTITY: 2SIZE
Width:1500 mm
Depth:50+200 mm
Height:70 mm
CAPACITY
M.E.P REQUIREMENT SPECIFICATIONSPLUMBING : Channels:
Material: 2mm. thick Stainless Steel Grade: 304 PicklePassivated. Leveling bolts to adjust height. Inclusive of foul airtrap, silt basket, drainage ring (O-ring)Gully: Corrosion protected deep-drawn gully body stainlesssteel grade 304. Pickle Passivated. Gully body outer diameter is178mm, with vertical outlet size 110 mm diameters.Grating for Gully top: Anti-slip electro-polished stainless steelgrating, with load bar size 30mm X 2mm.Load Class L,according to EN1253. Gratings are made by arc-welding (notspot welding)Side bottom Inlets: 50mm Socketed Side inlet made ofStainless Steel & EPDM seal for taking indirect waste fromsurrounding kitchen equipment if any.
Cold ∅ NAHot ∅ NAWaste ∅ 4” Floor
DrainELECTRIC :Power NAVoltage NAGas:BTU NACon. ∅ NA mm
ACCESSORIES: To drain heavy waste water via in-direct drainage from foodservice equipment and kitchen floor.
SPECIAL NOTE: Modular structure for gratings with smaller individual grating to fitthe size of the channel to avoid work injury from being too heavyto bulky to handle
Slab Penetration: Requires 110mm dia waste drain connection. Requires floor cut-out and recess.Refer to WPR drawings. Location/number of drain pipes from food service equipments to becoordinated with MEP Consultant.PREFERRED MAKE AND MODEL IN ALPHABETICAL ORDERACOCUSTOM BUILT
Integrated Solution for Hospitality ProjectsAn ISO 9001:2000 Certified Company
MD. K. Eqpt /Specs GOLDEN TEMPLE - AMRITSAR Page- 8 of 41INDIA Sector -17, Dwarka, New Delhi -110078
www.hpgconsulting.com
ITEM NO : FS-16 DRAIN TROUGH GRATING
QUANTITY: 2SIZE
Width:550 mm
Depth:550 mm
Height:70 mm
CAPACITY
M.E.P REQUIREMENT SPECIFICATIONSPLUMBING : Removable S.S Grating of 304 0f suitable size with 25 mm
height. Grating with hairline finishing. Grating with 5mm thick for outside ring, 3mmthick for
interior section, Grating has to be slip-resistant for one side, Plain on the
other. Minimum Point Load: 150 kg per square meter. Spot welding not to be used. To be made in one piece/ parts to make it suitable for
lifting 70 mm Trough to be made with 16 Gauge AISI 304 SS. Trough to be provided with drain outlet at center or as
per site with all sides sloping towards drain outlet. Drain out let of the trough to have 16 gauge extension
flanges of 40 mm depth and 100 mm dia. for entry in thefloor drain.
Trough has to be fully welded with no gaps. Suitable to be for fitting with type of flooring coming at
site.
Cold ∅ NAHot ∅ NAWaste ∅ 4” Floor
DrainELECTRIC :Power NAVoltage NAGas:BTU NACon. ∅ NA mm
ACCESSORIES: Silt Basket, With NBR infill (Polymer fill for bend), O ring for fittinginto drain system
SPECIAL NOTE: Trough to be provided as per the flooring type coming at site.
PREFERRED MAKE AND MODEL IN ALPHABETICAL ORDERACO BLUCHER DSSCUSTOM BUILT CUSTOM BUILT CUSTOM BUILT
Integrated Solution for Hospitality ProjectsAn ISO 9001:2000 Certified Company
MD. K. Eqpt /Specs GOLDEN TEMPLE - AMRITSAR Page- 9 of 41INDIA Sector -17, Dwarka, New Delhi -110078
www.hpgconsulting.com
ITEM NO : K-02 DRAIN TROUGH GRATING
QUANTITY: 21SIZE
Width:3000 mm
Depth:300 mm
Height:70 mm
CAPACITY
M.E.P REQUIREMENT SPECIFICATIONSPLUMBING : Removable S.S Grating of 304 0f suitable size with 25 mm
height. Grating with hairline finishing. Grating with 5mm thick for outside ring, 3mmthick for
interior section, Grating has to be slip-resistant for one side, Plain on the
other. Minimum Point Load: 150 kg per square meter. Spot welding not to be used. To be made in one piece/ parts to make it suitable for
lifting 70 mm Trough to be made with 16 Gauge AISI 304 SS. Trough to be provided with drain outlet at center or as
per site with all sides sloping towards drain outlet. Drain out let of the trough to have 16 gauge extension
flanges of 40 mm depth and 100 mm dia. for entry in thefloor drain.
Trough has to be fully welded with no gaps. Suitable to be for fitting with type of flooring coming at
site.
Cold ∅ NAHot ∅ NAWaste ∅ 4” Floor
DrainELECTRIC :Power NAVoltage NAGas:BTU NACon. ∅ NA mm
ACCESSORIES: Silt Basket, With NBR infill (Polymer fill for bend), O ring for fittinginto drain system
SPECIAL NOTE: Trough to be provided as per the flooring type coming at site.
PREFERRED MAKE AND MODEL IN ALPHABETICAL ORDERACO BLUCHER DSSCUSTOM BUILT CUSTOM BUILT CUSTOM BUILT
Integrated Solution for Hospitality ProjectsAn ISO 9001:2000 Certified Company
MD. K. Eqpt /Specs GOLDEN TEMPLE - AMRITSAR Page- 10 of 41INDIA Sector -17, Dwarka, New Delhi -110078
www.hpgconsulting.com
ITEM NO : K-05 DRAIN TROUGH GRATING
QUANTITY: 4SIZE
Width:1500 mm
Depth:300 mm
Height:70 mm
CAPACITY
M.E.P REQUIREMENT SPECIFICATIONSPLUMBING : Removable S.S Grating of 304 0f suitable size with 25 mm
height. Grating with hairline finishing. Grating with 5mm thick for outside ring, 3mmthick for
interior section, Grating has to be slip-resistant for one side, Plain on the
other. Minimum Point Load: 150 kg per square meter. Spot welding not to be used. To be made in one piece/ parts to make it suitable for
lifting 70 mm Trough to be made with 16 Gauge AISI 304 SS. Trough to be provided with drain outlet at center or as
per site with all sides sloping towards drain outlet. Drain out let of the trough to have 16 gauge extension
flanges of 40 mm depth and 100 mm dia. for entry in thefloor drain.
Trough has to be fully welded with no gaps. Suitable to be for fitting with type of flooring coming at
site.
Cold ∅ NAHot ∅ NAWaste ∅ 4” Floor
DrainELECTRIC :Power NAVoltage NAGas:BTU NACon. ∅ NA mm
ACCESSORIES: Silt Basket, With NBR infill (Polymer fill for bend), O ring for fittinginto drain system
SPECIAL NOTE: Trough to be provided as per the flooring type coming at site.
PREFERRED MAKE AND MODEL IN ALPHABETICAL ORDERACO BLUCHER DSSCUSTOM BUILT CUSTOM BUILT CUSTOM BUILT
Integrated Solution for Hospitality ProjectsAn ISO 9001:2000 Certified Company
MD. K. Eqpt /Specs GOLDEN TEMPLE - AMRITSAR Page- 11 of 41INDIA Sector -17, Dwarka, New Delhi -110078
www.hpgconsulting.com
ITEM NO : K-07 DRAIN TROUGH GRATING
QUANTITY: 16SIZE
Width:(4) 1500 mm(12) 1000 mm
Depth:500 mm
Height:150 mm
CAPACITY
M.E.P REQUIREMENT SPECIFICATIONSPLUMBING : Removable S.S Grating of 304 0f suitable size with 25 mm
height. Grating with hairline finishing. Grating with 5mm thick for outside ring, 3mmthick for
interior section, Grating has to be slip-resistant for one side, Plain on the
other. Minimum Point Load: 150 kg per square meter. Spot welding not to be used. To be made in one piece/ parts to make it suitable for
lifting 150 mm Trough to be made with 16 Gauge AISI 304 SS. Trough to be provided with drain outlet at center or as
per site with all sides sloping towards drain outlet. Drain out let of the trough to have 16 gauge extension
flanges of 40 mm depth and 100 mm dia. for entry in thefloor drain.
Trough has to be fully welded with no gaps. Suitable to be for fitting with type of flooring coming at
site.
Cold ∅ NAHot ∅ NAWaste ∅ 4” Floor
DrainELECTRIC :Power NAVoltage NAGas:BTU NACon. ∅ NA mm
ACCESSORIES: Silt Basket, With NBR infill (Polymer fill for bend), O ring for fittinginto drain system
SPECIAL NOTE: Trough to be provided as per the flooring type coming at site.
PREFERRED MAKE AND MODEL IN ALPHABETICAL ORDERACO BLUCHER DSSCUSTOM BUILT CUSTOM BUILT CUSTOM BUILT
Integrated Solution for Hospitality ProjectsAn ISO 9001:2000 Certified Company
MD. K. Eqpt /Specs GOLDEN TEMPLE - AMRITSAR Page- 12 of 41INDIA Sector -17, Dwarka, New Delhi -110078
www.hpgconsulting.com
ITEM NO : K-22 DRAIN TROUGH GRATING
QUANTITY: 9SIZE
Width:550 mm
Depth:550 mm
Height:70 mm
CAPACITY
M.E.P REQUIREMENT SPECIFICATIONSPLUMBING : Removable S.S Grating of 304 0f suitable size with 25 mm
height. Grating with hairline finishing. Grating with 5mm thick for outside ring, 3mmthick for
interior section, Grating has to be slip-resistant for one side, Plain on the
other. Minimum Point Load: 150 kg per square meter. Spot welding not to be used. To be made in one piece/ parts to make it suitable for
lifting 70 mm Trough to be made with 16 Gauge AISI 304 SS. Trough to be provided with drain outlet at center or as
per site with all sides sloping towards drain outlet. Drain out let of the trough to have 16 gauge extension
flanges of 40 mm depth and 100 mm dia. for entry in thefloor drain.
Trough has to be fully welded with no gaps. Suitable to be for fitting with type of flooring coming at
site.
Cold ∅ NAHot ∅ NAWaste ∅ 4” Floor
DrainELECTRIC :Power NAVoltage NAGas:BTU NACon. ∅ NA mm
ACCESSORIES: Silt Basket, With NBR infill (Polymer fill for bend), O ring for fittinginto drain system
SPECIAL NOTE: Trough to be provided as per the flooring type coming at site.
PREFERRED MAKE AND MODEL IN ALPHABETICAL ORDERACO BLUCHER DSSCUSTOM BUILT CUSTOM BUILT CUSTOM BUILT
Integrated Solution for Hospitality ProjectsAn ISO 9001:2000 Certified Company
MD. K. Eqpt /Specs GOLDEN TEMPLE - AMRITSAR Page- 13 of 41INDIA Sector -17, Dwarka, New Delhi -110078
www.hpgconsulting.com
ITEM NO : K-23 DRAIN TROUGH GRATING
QUANTITY: 4SIZE
Width:3000 mm
Depth:300 mm
Height:70 mm
CAPACITY
M.E.P REQUIREMENT SPECIFICATIONSPLUMBING : Removable S.S Grating of 304 0f suitable size with 25 mm
height. Grating with hairline finishing. Grating with 5mm thick for outside ring, 3mmthick for
interior section, Grating has to be slip-resistant for one side, Plain on the
other. Minimum Point Load: 150 kg per square meter. Spot welding not to be used. To be made in one piece/ parts to make it suitable for
lifting 70 mm Trough to be made with 16 Gauge AISI 304 SS. Trough to be provided with drain outlet at center or as
per site with all sides sloping towards drain outlet. Drain out let of the trough to have 16 gauge extension
flanges of 40 mm depth and 100 mm dia. for entry in thefloor drain.
Trough has to be fully welded with no gaps. Suitable to be for fitting with type of flooring coming at
site.
Cold ∅ NAHot ∅ NAWaste ∅ 4” Floor
DrainELECTRIC :Power NAVoltage NAGas:BTU NACon. ∅ NA mm
ACCESSORIES: Silt Basket, With NBR infill (Polymer fill for bend), O ring for fittinginto drain system
SPECIAL NOTE: Trough to be provided as per the flooring type coming at site.
PREFERRED MAKE AND MODEL IN ALPHABETICAL ORDERACO BLUCHER DSSCUSTOM BUILT CUSTOM BUILT CUSTOM BUILT
Integrated Solution for Hospitality ProjectsAn ISO 9001:2000 Certified Company
MD. K. Eqpt /Specs GOLDEN TEMPLE - AMRITSAR Page- 14 of 41INDIA Sector -17, Dwarka, New Delhi -110078
www.hpgconsulting.com
ITEM NO : K-30 SLOT CHANNEL / DRAIN RAIL
QUANTITY: 1SIZE
Width:1500 mm
Depth:50+200 mm
Height:70 mm
CAPACITY
M.E.P REQUIREMENT SPECIFICATIONSPLUMBING : Channels:
Material: 2mm. thick Stainless Steel Grade: 304 PicklePassivated. Leveling bolts to adjust height. Inclusive of foul airtrap, silt basket, drainage ring (O-ring)Gully: Corrosion protected deep-drawn gully body stainlesssteel grade 304. Pickle Passivated. Gully body outer diameter is178mm, with vertical outlet size 110 mm diameters.Grating for Gully top: Anti-slip electro-polished stainless steelgrating, with load bar size 30mm X 2mm.Load Class L,according to EN1253. Gratings are made by arc-welding (notspot welding)Side bottom Inlets: 50mm Socketed Side inlet made ofStainless Steel & EPDM seal for taking indirect waste fromsurrounding kitchen equipment if any.
Cold ∅ NAHot ∅ NAWaste ∅ 4” Floor
DrainELECTRIC :Power NAVoltage NAGas:BTU NACon. ∅ NA mm
ACCESSORIES: To drain heavy waste water via in-direct drainage from foodservice equipment and kitchen floor.
SPECIAL NOTE: Modular structure for gratings with smaller individual grating to fitthe size of the channel to avoid work injury from being too heavyto bulky to handle
Slab Penetration: Requires 110mm dia waste drain connection. Requires floor cut-out and recess.Refer to WPR drawings. Location/number of drain pipes from food service equipments to becoordinated with MEP Consultant.PREFERRED MAKE AND MODEL IN ALPHABETICAL ORDERACOCUSTOM BUILT
Integrated Solution for Hospitality ProjectsAn ISO 9001:2000 Certified Company
MD. K. Eqpt /Specs GOLDEN TEMPLE - AMRITSAR Page- 15 of 41INDIA Sector -17, Dwarka, New Delhi -110078
www.hpgconsulting.com
ITEM NO : K-38 DRAIN TROUGH GRATING
QUANTITY: 2SIZE
Width:600 mm
Depth:300 mm
Height:70 mm
CAPACITY
M.E.P REQUIREMENT SPECIFICATIONSPLUMBING : Removable S.S Grating of 304 0f suitable size with 25 mm
height. Grating with hairline finishing. Grating with 5mm thick for outside ring, 3mmthick for
interior section, Grating has to be slip-resistant for one side, Plain on the
other. Minimum Point Load: 150 kg per square meter. Spot welding not to be used. To be made in one piece/ parts to make it suitable for
lifting 70 mm Trough to be made with 16 Gauge AISI 304 SS. Trough to be provided with drain outlet at center or as
per site with all sides sloping towards drain outlet. Drain out let of the trough to have 16 gauge extension
flanges of 40 mm depth and 100 mm dia. for entry in thefloor drain.
Trough has to be fully welded with no gaps. Suitable to be for fitting with type of flooring coming at
site.
Cold ∅ NAHot ∅ NAWaste ∅ 4” Floor
DrainELECTRIC :Power NAVoltage NAGas:BTU NACon. ∅ NA mm
ACCESSORIES: Silt Basket, With NBR infill (Polymer fill for bend), O ring for fittinginto drain system
SPECIAL NOTE: Trough to be provided as per the flooring type coming at site.
PREFERRED MAKE AND MODEL IN ALPHABETICAL ORDERACO BLUCHER DSSCUSTOM BUILT CUSTOM BUILT CUSTOM BUILT
Integrated Solution for Hospitality ProjectsAn ISO 9001:2000 Certified Company
MD. K. Eqpt /Specs GOLDEN TEMPLE - AMRITSAR Page- 16 of 41INDIA Sector -17, Dwarka, New Delhi -110078
www.hpgconsulting.com
ITEM NO : K-45 DRAIN TROUGH GRATING
QUANTITY: 3SIZE
Width:3000 mm
Depth:300 mm
Height:70 mm
CAPACITY
M.E.P REQUIREMENT SPECIFICATIONSPLUMBING : Removable S.S Grating of 304 0f suitable size with 25 mm
height. Grating with hairline finishing. Grating with 5mm thick for outside ring, 3mmthick for
interior section, Grating has to be slip-resistant for one side, Plain on the
other. Minimum Point Load: 150 kg per square meter. Spot welding not to be used. To be made in one piece/ parts to make it suitable for
lifting 70 mm Trough to be made with 16 Gauge AISI 304 SS. Trough to be provided with drain outlet at center or as
per site with all sides sloping towards drain outlet. Drain out let of the trough to have 16 gauge extension
flanges of 40 mm depth and 100 mm dia. for entry in thefloor drain.
Trough has to be fully welded with no gaps. Suitable to be for fitting with type of flooring coming at
site.
Cold ∅ NAHot ∅ NAWaste ∅ 4” Floor
DrainELECTRIC :Power NAVoltage NAGas:BTU NACon. ∅ NA mm
ACCESSORIES: Silt Basket, With NBR infill (Polymer fill for bend), O ring for fittinginto drain system
SPECIAL NOTE: Trough to be provided as per the flooring type coming at site.
PREFERRED MAKE AND MODEL IN ALPHABETICAL ORDERACO BLUCHER DSSCUSTOM BUILT CUSTOM BUILT CUSTOM BUILT
Integrated Solution for Hospitality ProjectsAn ISO 9001:2000 Certified Company
MD. K. Eqpt /Specs GOLDEN TEMPLE - AMRITSAR Page- 17 of 41INDIA Sector -17, Dwarka, New Delhi -110078
www.hpgconsulting.com
ITEM NO : K-52 SLOT CHANNEL / DRAIN RAIL
QUANTITY: 2SIZE
Width:1500 mm
Depth:50+200 mm
Height:70 mm
CAPACITY
M.E.P REQUIREMENT SPECIFICATIONSPLUMBING : Channels:
Material: 2mm. thick Stainless Steel Grade: 304 PicklePassivated. Leveling bolts to adjust height. Inclusive of foul airtrap, silt basket, drainage ring (O-ring)Gully: Corrosion protected deep-drawn gully body stainlesssteel grade 304. Pickle Passivated. Gully body outer diameter is178mm, with vertical outlet size 110 mm diameters.Grating for Gully top: Anti-slip electro-polished stainless steelgrating, with load bar size 30mm X 2mm.Load Class L,according to EN1253. Gratings are made by arc-welding (notspot welding)Side bottom Inlets: 50mm Socketed Side inlet made ofStainless Steel & EPDM seal for taking indirect waste fromsurrounding kitchen equipment if any.
Cold ∅ NAHot ∅ NAWaste ∅ 4” Floor
DrainELECTRIC :Power NAVoltage NAGas:BTU NACon. ∅ NA mm
ACCESSORIES: To drain heavy waste water via in-direct drainage from foodservice equipment and kitchen floor.
SPECIAL NOTE: Modular structure for gratings with smaller individual grating to fitthe size of the channel to avoid work injury from being too heavyto bulky to handle
Slab Penetration: Requires 110mm dia waste drain connection. Requires floor cut-out and recess.Refer to WPR drawings. Location/number of drain pipes from food service equipments to becoordinated with MEP Consultant.PREFERRED MAKE AND MODEL IN ALPHABETICAL ORDERACOCUSTOM BUILT
Integrated Solution for Hospitality ProjectsAn ISO 9001:2000 Certified Company
MD. K. Eqpt /Specs GOLDEN TEMPLE - AMRITSAR Page- 18 of 41INDIA Sector -17, Dwarka, New Delhi -110078
www.hpgconsulting.com
ITEM NO : K-55 DRAIN TROUGH GRATING
QUANTITY: 2SIZE
Width:2000 mm
Depth:300 mm
Height:70 mm
CAPACITY
M.E.P REQUIREMENT SPECIFICATIONSPLUMBING : Removable S.S Grating of 304 0f suitable size with 25 mm
height. Grating with hairline finishing. Grating with 5mm thick for outside ring, 3mmthick for
interior section, Grating has to be slip-resistant for one side, Plain on the
other. Minimum Point Load: 150 kg per square meter. Spot welding not to be used. To be made in one piece/ parts to make it suitable for
lifting 70 mm Trough to be made with 16 Gauge AISI 304 SS. Trough to be provided with drain outlet at center or as
per site with all sides sloping towards drain outlet. Drain out let of the trough to have 16 gauge extension
flanges of 40 mm depth and 100 mm dia. for entry in thefloor drain.
Trough has to be fully welded with no gaps. Suitable to be for fitting with type of flooring coming at
site.
Cold ∅ NAHot ∅ NAWaste ∅ 4” Floor
DrainELECTRIC :Power NAVoltage NAGas:BTU NACon. ∅ NA mm
ACCESSORIES: Silt Basket, With NBR infill (Polymer fill for bend), O ring for fittinginto drain system
SPECIAL NOTE: Trough to be provided as per the flooring type coming at site.
PREFERRED MAKE AND MODEL IN ALPHABETICAL ORDERACO BLUCHER DSSCUSTOM BUILT CUSTOM BUILT CUSTOM BUILT
Integrated Solution for Hospitality ProjectsAn ISO 9001:2000 Certified Company
MD. K. Eqpt /Specs GOLDEN TEMPLE - AMRITSAR Page- 19 of 41INDIA Sector -17, Dwarka, New Delhi -110078
www.hpgconsulting.com
ITEM NO : K-55A DRAIN TROUGH GRATING
QUANTITY: 1SIZE
Width:2500 mm
Depth:300 mm
Height:70 mm
CAPACITY
M.E.P REQUIREMENT SPECIFICATIONSPLUMBING : Removable S.S Grating of 304 0f suitable size with 25 mm
height. Grating with hairline finishing. Grating with 5mm thick for outside ring, 3mmthick for
interior section, Grating has to be slip-resistant for one side, Plain on the
other. Minimum Point Load: 150 kg per square meter. Spot welding not to be used. To be made in one piece/ parts to make it suitable for
lifting 70 mm Trough to be made with 16 Gauge AISI 304 SS. Trough to be provided with drain outlet at center or as
per site with all sides sloping towards drain outlet. Drain out let of the trough to have 16 gauge extension
flanges of 40 mm depth and 100 mm dia. for entry in thefloor drain.
Trough has to be fully welded with no gaps. Suitable to be for fitting with type of flooring coming at
site.
Cold ∅ NAHot ∅ NAWaste ∅ 4” Floor
DrainELECTRIC :Power NAVoltage NAGas:BTU NACon. ∅ NA mm
ACCESSORIES: Silt Basket, With NBR infill (Polymer fill for bend), O ring for fittinginto drain system
SPECIAL NOTE: Trough to be provided as per the flooring type coming at site.
PREFERRED MAKE AND MODEL IN ALPHABETICAL ORDERACO BLUCHER DSSCUSTOM BUILT CUSTOM BUILT CUSTOM BUILT
Integrated Solution for Hospitality ProjectsAn ISO 9001:2000 Certified Company
MD. K. Eqpt /Specs GOLDEN TEMPLE - AMRITSAR Page- 20 of 41INDIA Sector -17, Dwarka, New Delhi -110078
www.hpgconsulting.com
ITEM NO : K-56 DRAIN TROUGH GRATING
QUANTITY: 39SIZE
Width:3000 mm
Depth:300 mm
Height:70 mm
CAPACITY
M.E.P REQUIREMENT SPECIFICATIONSPLUMBING : Removable S.S Grating of 304 0f suitable size with 25 mm
height. Grating with hairline finishing. Grating with 5mm thick for outside ring, 3mmthick for
interior section, Grating has to be slip-resistant for one side, Plain on the
other. Minimum Point Load: 150 kg per square meter. Spot welding not to be used. To be made in one piece/ parts to make it suitable for
lifting 70 mm Trough to be made with 16 Gauge AISI 304 SS. Trough to be provided with drain outlet at center or as
per site with all sides sloping towards drain outlet. Drain out let of the trough to have 16 gauge extension
flanges of 40 mm depth and 100 mm dia. for entry in thefloor drain.
Trough has to be fully welded with no gaps. Suitable to be for fitting with type of flooring coming at
site.
Cold ∅ NAHot ∅ NAWaste ∅ 4” Floor
DrainELECTRIC :Power NAVoltage NAGas:BTU NACon. ∅ NA mm
ACCESSORIES: Silt Basket, With NBR infill (Polymer fill for bend), O ring for fittinginto drain system
SPECIAL NOTE: Trough to be provided as per the flooring type coming at site.
PREFERRED MAKE AND MODEL IN ALPHABETICAL ORDERACO BLUCHER DSSCUSTOM BUILT CUSTOM BUILT CUSTOM BUILT
Integrated Solution for Hospitality ProjectsAn ISO 9001:2000 Certified Company
MD. K. Eqpt /Specs GOLDEN TEMPLE - AMRITSAR Page- 21 of 41INDIA Sector -17, Dwarka, New Delhi -110078
www.hpgconsulting.com
ITEM NO : K-56A DRAIN TROUGH GRATING
QUANTITY: 4SIZE
Width:1050 mm
Depth:350 mm
Height:70 mm
CAPACITY
M.E.P REQUIREMENT SPECIFICATIONSPLUMBING : Removable S.S Grating of 304 0f suitable size with 25 mm
height. Grating with hairline finishing. Grating with 5mm thick for outside ring, 3mmthick for
interior section, Grating has to be slip-resistant for one side, Plain on the
other. Minimum Point Load: 150 kg per square meter. Spot welding not to be used. To be made in one piece/ parts to make it suitable for
lifting 70 mm Trough to be made with 16 Gauge AISI 304 SS. Trough to be provided with drain outlet at center or as
per site with all sides sloping towards drain outlet. Drain out let of the trough to have 16 gauge extension
flanges of 40 mm depth and 100 mm dia. for entry in thefloor drain.
Trough has to be fully welded with no gaps. Suitable to be for fitting with type of flooring coming at
site.
Cold ∅ NAHot ∅ NAWaste ∅ 4” Floor
DrainELECTRIC :Power NAVoltage NAGas:BTU NACon. ∅ NA mm
ACCESSORIES: Silt Basket, With NBR infill (Polymer fill for bend), O ring for fittinginto drain system
SPECIAL NOTE: Trough to be provided as per the flooring type coming at site.
PREFERRED MAKE AND MODEL IN ALPHABETICAL ORDERACO BLUCHER DSSCUSTOM BUILT CUSTOM BUILT CUSTOM BUILT
Integrated Solution for Hospitality ProjectsAn ISO 9001:2000 Certified Company
MD. K. Eqpt /Specs GOLDEN TEMPLE - AMRITSAR Page- 22 of 41INDIA Sector -17, Dwarka, New Delhi -110078
www.hpgconsulting.com
ITEM NO : K-57 DRAIN TROUGH GRATING
QUANTITY: 12SIZE
Width:1500 mm
Depth:300 mm
Height:70 mm
CAPACITY
M.E.P REQUIREMENT SPECIFICATIONSPLUMBING : Removable S.S Grating of 304 0f suitable size with 25 mm
height. Grating with hairline finishing. Grating with 5mm thick for outside ring, 3mmthick for
interior section, Grating has to be slip-resistant for one side, Plain on the
other. Minimum Point Load: 150 kg per square meter. Spot welding not to be used. To be made in one piece/ parts to make it suitable for
lifting 70 mm Trough to be made with 16 Gauge AISI 304 SS. Trough to be provided with drain outlet at center or as
per site with all sides sloping towards drain outlet. Drain out let of the trough to have 16 gauge extension
flanges of 40 mm depth and 100 mm dia. for entry in thefloor drain.
Trough has to be fully welded with no gaps. Suitable to be for fitting with type of flooring coming at
site.
Cold ∅ NAHot ∅ NAWaste ∅ 4” Floor
DrainELECTRIC :Power NAVoltage NAGas:BTU NACon. ∅ NA mm
ACCESSORIES: Silt Basket, With NBR infill (Polymer fill for bend), O ring for fittinginto drain system
SPECIAL NOTE: Trough to be provided as per the flooring type coming at site.
PREFERRED MAKE AND MODEL IN ALPHABETICAL ORDERACO BLUCHER DSSCUSTOM BUILT CUSTOM BUILT CUSTOM BUILT
Integrated Solution for Hospitality ProjectsAn ISO 9001:2000 Certified Company
MD. K. Eqpt /Specs GOLDEN TEMPLE - AMRITSAR Page- 23 of 41INDIA Sector -17, Dwarka, New Delhi -110078
www.hpgconsulting.com
ITEM NO : K-58 DRAIN TROUGH GRATING
QUANTITY: 24SIZE
Width:300 mm
Depth:300 mm
Height:70 mm
CAPACITY
M.E.P REQUIREMENT SPECIFICATIONSPLUMBING : Removable S.S Grating of 304 0f suitable size with 25 mm
height. Grating with hairline finishing. Grating with 5mm thick for outside ring, 3mmthick for
interior section, Grating has to be slip-resistant for one side, Plain on the
other. Minimum Point Load: 150 kg per square meter. Spot welding not to be used. To be made in one piece/ parts to make it suitable for
lifting 70 mm Trough to be made with 16 Gauge AISI 304 SS. Trough to be provided with drain outlet at center or as
per site with all sides sloping towards drain outlet. Drain out let of the trough to have 16 gauge extension
flanges of 40 mm depth and 100 mm dia. for entry in thefloor drain.
Trough has to be fully welded with no gaps. Suitable to be for fitting with type of flooring coming at
site.
Cold ∅ NAHot ∅ NAWaste ∅ 4” Floor
DrainELECTRIC :Power NAVoltage NAGas:BTU NACon. ∅ NA mm
ACCESSORIES: Silt Basket, With NBR infill (Polymer fill for bend), O ring for fittinginto drain system
SPECIAL NOTE: Trough to be provided as per the flooring type coming at site.
PREFERRED MAKE AND MODEL IN ALPHABETICAL ORDERACO BLUCHER DSSCUSTOM BUILT CUSTOM BUILT CUSTOM BUILT
Integrated Solution for Hospitality ProjectsAn ISO 9001:2000 Certified Company
MD. K. Eqpt /Specs GOLDEN TEMPLE - AMRITSAR Page- 24 of 41INDIA Sector -17, Dwarka, New Delhi -110078
www.hpgconsulting.com
ITEM NO : K-60 DRAIN TROUGH GRATING
QUANTITY: 1SIZE
Width:550 mm
Depth:550 mm
Height:70 mm
CAPACITY
M.E.P REQUIREMENT SPECIFICATIONSPLUMBING : Removable S.S Grating of 304 0f suitable size with 25 mm
height. Grating with hairline finishing. Grating with 5mm thick for outside ring, 3mmthick for
interior section, Grating has to be slip-resistant for one side, Plain on the
other. Minimum Point Load: 150 kg per square meter. Spot welding not to be used. To be made in one piece/ parts to make it suitable for
lifting 70 mm Trough to be made with 16 Gauge AISI 304 SS. Trough to be provided with drain outlet at center or as
per site with all sides sloping towards drain outlet. Drain out let of the trough to have 16 gauge extension
flanges of 40 mm depth and 100 mm dia. for entry in thefloor drain.
Trough has to be fully welded with no gaps. Suitable to be for fitting with type of flooring coming at
site.
Cold ∅ NAHot ∅ NAWaste ∅ 4” Floor
DrainELECTRIC :Power NAVoltage NAGas:BTU NACon. ∅ NA mm
ACCESSORIES: Silt Basket, With NBR infill (Polymer fill for bend), O ring for fittinginto drain system
SPECIAL NOTE: Trough to be provided as per the flooring type coming at site.
PREFERRED MAKE AND MODEL IN ALPHABETICAL ORDERACO BLUCHER DSSCUSTOM BUILT CUSTOM BUILT CUSTOM BUILT
Integrated Solution for Hospitality ProjectsAn ISO 9001:2000 Certified Company
MD. K. Eqpt /Specs GOLDEN TEMPLE - AMRITSAR Page- 25 of 41INDIA Sector -17, Dwarka, New Delhi -110078
www.hpgconsulting.com
ITEM NO : SK-02 DRAIN TROUGH GRATING
QUANTITY: 3SIZE
Width:3000 mm
Depth:300 mm
Height:70 mm
CAPACITY
M.E.P REQUIREMENT SPECIFICATIONSPLUMBING : Removable S.S Grating of 304 0f suitable size with 25 mm
height. Grating with hairline finishing. Grating with 5mm thick for outside ring, 3mmthick for
interior section, Grating has to be slip-resistant for one side, Plain on the
other. Minimum Point Load: 150 kg per square meter. Spot welding not to be used. To be made in one piece/ parts to make it suitable for
lifting 70 mm Trough to be made with 16 Gauge AISI 304 SS. Trough to be provided with drain outlet at center or as
per site with all sides sloping towards drain outlet. Drain out let of the trough to have 16 gauge extension
flanges of 40 mm depth and 100 mm dia. for entry in thefloor drain.
Trough has to be fully welded with no gaps. Suitable to be for fitting with type of flooring coming at
site.
Cold ∅ NAHot ∅ NAWaste ∅ 4” Floor
DrainELECTRIC :Power NAVoltage NAGas:BTU NACon. ∅ NA mm
ACCESSORIES: Silt Basket, With NBR infill (Polymer fill for bend), O ring for fittinginto drain system
SPECIAL NOTE: Trough to be provided as per the flooring type coming at site.
PREFERRED MAKE AND MODEL IN ALPHABETICAL ORDERACO BLUCHER DSSCUSTOM BUILT CUSTOM BUILT CUSTOM BUILT
Integrated Solution for Hospitality ProjectsAn ISO 9001:2000 Certified Company
MD. K. Eqpt /Specs GOLDEN TEMPLE - AMRITSAR Page- 26 of 41INDIA Sector -17, Dwarka, New Delhi -110078
www.hpgconsulting.com
ITEM NO : SK-04 DRAIN TROUGH GRATING
QUANTITY: 1SIZE
Width:1500 mm
Depth:300 mm
Height:70 mm
CAPACITY
M.E.P REQUIREMENT SPECIFICATIONSPLUMBING : Removable S.S Grating of 304 0f suitable size with 25 mm
height. Grating with hairline finishing. Grating with 5mm thick for outside ring, 3mmthick for
interior section, Grating has to be slip-resistant for one side, Plain on the
other. Minimum Point Load: 150 kg per square meter. Spot welding not to be used. To be made in one piece/ parts to make it suitable for
lifting 70 mm Trough to be made with 16 Gauge AISI 304 SS. Trough to be provided with drain outlet at center or as
per site with all sides sloping towards drain outlet. Drain out let of the trough to have 16 gauge extension
flanges of 40 mm depth and 100 mm dia. for entry in thefloor drain.
Trough has to be fully welded with no gaps. Suitable to be for fitting with type of flooring coming at
site.
Cold ∅ NAHot ∅ NAWaste ∅ 4” Floor
DrainELECTRIC :Power NAVoltage NAGas:BTU NACon. ∅ NA mm
ACCESSORIES: Silt Basket, With NBR infill (Polymer fill for bend), O ring for fittinginto drain system
SPECIAL NOTE: Trough to be provided as per the flooring type coming at site.
PREFERRED MAKE AND MODEL IN ALPHABETICAL ORDERACO BLUCHER DSSCUSTOM BUILT CUSTOM BUILT CUSTOM BUILT
Integrated Solution for Hospitality ProjectsAn ISO 9001:2000 Certified Company
MD. K. Eqpt /Specs GOLDEN TEMPLE - AMRITSAR Page- 27 of 41INDIA Sector -17, Dwarka, New Delhi -110078
www.hpgconsulting.com
ITEM NO : SK-07 SLOT CHANNEL / DRAIN RAIL
QUANTITY: 1SIZE
Width:1500 mm
Depth:50+200 mm
Height:70 mm
CAPACITY
M.E.P REQUIREMENT SPECIFICATIONSPLUMBING : Channels:
Material: 2mm. thick Stainless Steel Grade: 304 PicklePassivated. Leveling bolts to adjust height. Inclusive of foul airtrap, silt basket, drainage ring (O-ring)Gully: Corrosion protected deep-drawn gully body stainlesssteel grade 304. Pickle Passivated. Gully body outer diameter is178mm, with vertical outlet size 110 mm diameters.Grating for Gully top: Anti-slip electro-polished stainless steelgrating, with load bar size 30mm X 2mm.Load Class L,according to EN1253. Gratings are made by arc-welding (notspot welding)Side bottom Inlets :50mm Socketed Side inlet made ofStainless Steel & EPDM seal for taking indirect waste fromsurrounding kitchen equipment if any
Cold ∅ NAHot ∅ NAWaste ∅ 4” Floor
DrainELECTRIC :Power NAVoltage NAGas:BTU NACon. ∅ NA mm
Function To drain heavy waste water via in-direct drainage from foodservice equipment and kitchen floor.
SAFETY NORMS: Modular structure for gratings with smaller individual grating to fitthe size of the channel to avoid work injury from being too heavyto bulky to handle
Slab Penetration: Requires 110mm dia waste drain connection. Requires floor cut-out and recess.Refer to WPR drawings. Location/number of drain pipes from food service equipments to becoordinated with MEP Consultant.PREFERRRED MAKE AND MODEL IN ALPHABETICAL ORDERACOCUSTOM BUILT
Integrated Solution for Hospitality ProjectsAn ISO 9001:2000 Certified Company
MD. K. Eqpt /Specs GOLDEN TEMPLE - AMRITSAR Page- 28 of 41INDIA Sector -17, Dwarka, New Delhi -110078
www.hpgconsulting.com
ITEM NO : SK-10 DRAIN TROUGH GRATING
QUANTITY: 1SIZE
Width:550 mm
Depth:550 mm
Height:70 mm
CAPACITY
M.E.P REQUIREMENT SPECIFICATIONSPLUMBING : Removable S.S Grating of 304 0f suitable size with 25 mm
height. Grating with hairline finishing. Grating with 5mm thick for outside ring, 3mmthick for
interior section, Grating has to be slip-resistant for one side, Plain on the
other. Minimum Point Load: 150 kg per square meter. Spot welding not to be used. To be made in one piece/ parts to make it suitable for
lifting 70 mm Trough to be made with 16 Gauge AISI 304 SS. Trough to be provided with drain outlet at center or as
per site with all sides sloping towards drain outlet. Drain out let of the trough to have 16 gauge extension
flanges of 40 mm depth and 100 mm dia. for entry in thefloor drain.
Trough has to be fully welded with no gaps. Suitable to be for fitting with type of flooring coming at
site.
Cold ∅ NAHot ∅ NAWaste ∅ 4” Floor
DrainELECTRIC :Power NAVoltage NAGas:BTU NACon. ∅ NA mm
ACCESSORIES: Silt Basket, With NBR infill (Polymer fill for bend), O ring for fittinginto drain system
SPECIAL NOTE: Trough to be provided as per the flooring type coming at site.
PREFERRED MAKE AND MODEL IN ALPHABETICAL ORDERACO BLUCHER DSSCUSTOM BUILT CUSTOM BUILT CUSTOM BUILT
Integrated Solution for Hospitality ProjectsAn ISO 9001:2000 Certified Company
MD. K. Eqpt /Specs GOLDEN TEMPLE - AMRITSAR Page- 29 of 41INDIA Sector -17, Dwarka, New Delhi -110078
www.hpgconsulting.com
ITEM NO : SK-12 DRAIN TROUGH GRATING
QUANTITY: 2SIZE
Width:3000 mm
Depth:300 mm
Height:70 mm
CAPACITY
M.E.P REQUIREMENT SPECIFICATIONSPLUMBING : Removable S.S Grating of 304 0f suitable size with 25 mm
height. Grating with hairline finishing. Grating with 5mm thick for outside ring, 3mmthick for
interior section, Grating has to be slip-resistant for one side, Plain on the
other. Minimum Point Load: 150 kg per square meter. Spot welding not to be used. To be made in one piece/ parts to make it suitable for
lifting 70 mm Trough to be made with 16 Gauge AISI 304 SS. Trough to be provided with drain outlet at center or as
per site with all sides sloping towards drain outlet. Drain out let of the trough to have 16 gauge extension
flanges of 40 mm depth and 100 mm dia. for entry in thefloor drain.
Trough has to be fully welded with no gaps. Suitable to be for fitting with type of flooring coming at
site.
Cold ∅ NAHot ∅ NAWaste ∅ 4” Floor
DrainELECTRIC :Power NAVoltage NAGas:BTU NACon. ∅ NA mm
ACCESSORIES: Silt Basket, With NBR infill (Polymer fill for bend), O ring for fittinginto drain system
SPECIAL NOTE: Trough to be provided as per the flooring type coming at site.
PREFERRED MAKE AND MODEL IN ALPHABETICAL ORDERACO BLUCHER DSSCUSTOM BUILT CUSTOM BUILT CUSTOM BUILT
Integrated Solution for Hospitality ProjectsAn ISO 9001:2000 Certified Company
MD. K. Eqpt /Specs GOLDEN TEMPLE - AMRITSAR Page- 30 of 41INDIA Sector -17, Dwarka, New Delhi -110078
www.hpgconsulting.com
ITEM NO : CK-03 DRAIN TROUGH GRATING
QUANTITY: 7SIZE
Width:1500 mm
Depth:300 mm
Height:70 mm
CAPACITY
M.E.P REQUIREMENT SPECIFICATIONSPLUMBING : Removable S.S Grating of 304 0f suitable size with 25 mm
height. Grating with hairline finishing. Grating with 5mm thick for outside ring, 3mmthick for
interior section, Grating has to be slip-resistant for one side, Plain on the
other. Minimum Point Load: 150 kg per square meter. Spot welding not to be used. To be made in one piece/ parts to make it suitable for
lifting 70 mm Trough to be made with 16 Gauge AISI 304 SS. Trough to be provided with drain outlet at center or as
per site with all sides sloping towards drain outlet. Drain out let of the trough to have 16 gauge extension
flanges of 40 mm depth and 100 mm dia. for entry in thefloor drain.
Trough has to be fully welded with no gaps. Suitable to be for fitting with type of flooring coming at
site.
Cold ∅ NAHot ∅ NAWaste ∅ 4” Floor
DrainELECTRIC :Power NAVoltage NAGas:BTU NACon. ∅ NA mm
ACCESSORIES: Silt Basket, With NBR infill (Polymer fill for bend), O ring for fittinginto drain system
SPECIAL NOTE: Trough to be provided as per the flooring type coming at site.
PREFERRED MAKE AND MODEL IN ALPHABETICAL ORDERACO BLUCHER DSSCUSTOM BUILT CUSTOM BUILT CUSTOM BUILT
Integrated Solution for Hospitality ProjectsAn ISO 9001:2000 Certified Company
MD. K. Eqpt /Specs GOLDEN TEMPLE - AMRITSAR Page- 31 of 41INDIA Sector -17, Dwarka, New Delhi -110078
www.hpgconsulting.com
ITEM NO : CK-07 DRAIN TROUGH GRATING
QUANTITY: 1SIZE
Width:2000 mm
Depth:300 mm
Height:70 mm
CAPACITY
M.E.P REQUIREMENT SPECIFICATIONSPLUMBING : Removable S.S Grating of 304 0f suitable size with 25 mm
height. Grating with hairline finishing. Grating with 5mm thick for outside ring, 3mmthick for
interior section, Grating has to be slip-resistant for one side, Plain on the
other. Minimum Point Load: 150 kg per square meter. Spot welding not to be used. To be made in one piece/ parts to make it suitable for
lifting 70 mm Trough to be made with 16 Gauge AISI 304 SS. Trough to be provided with drain outlet at center or as
per site with all sides sloping towards drain outlet. Drain out let of the trough to have 16 gauge extension
flanges of 40 mm depth and 100 mm dia. for entry in thefloor drain.
Trough has to be fully welded with no gaps. Suitable to be for fitting with type of flooring coming at
site.
Cold ∅ NAHot ∅ NAWaste ∅ 4” Floor
DrainELECTRIC :Power NAVoltage NAGas:BTU NACon. ∅ NA mm
ACCESSORIES: Silt Basket, With NBR infill (Polymer fill for bend), O ring for fittinginto drain system
SPECIAL NOTE: Trough to be provided as per the flooring type coming at site.
PREFERRED MAKE AND MODEL IN ALPHABETICAL ORDERACO BLUCHER DSSCUSTOM BUILT CUSTOM BUILT CUSTOM BUILT
Integrated Solution for Hospitality ProjectsAn ISO 9001:2000 Certified Company
MD. K. Eqpt /Specs GOLDEN TEMPLE - AMRITSAR Page- 32 of 41INDIA Sector -17, Dwarka, New Delhi -110078
www.hpgconsulting.com
ITEM NO : CK-09 DRAIN TROUGH GRATING
QUANTITY: 2SIZE
Width:3000 mm
Depth:300 mm
Height:70 mm
CAPACITY
M.E.P REQUIREMENT SPECIFICATIONSPLUMBING : Removable S.S Grating of 304 0f suitable size with 25 mm
height. Grating with hairline finishing. Grating with 5mm thick for outside ring, 3mmthick for
interior section, Grating has to be slip-resistant for one side, Plain on the
other. Minimum Point Load: 150 kg per square meter. Spot welding not to be used. To be made in one piece/ parts to make it suitable for
lifting 70 mm Trough to be made with 16 Gauge AISI 304 SS. Trough to be provided with drain outlet at center or as
per site with all sides sloping towards drain outlet. Drain out let of the trough to have 16 gauge extension
flanges of 40 mm depth and 100 mm dia. for entry in thefloor drain.
Trough has to be fully welded with no gaps. Suitable to be for fitting with type of flooring coming at
site.
Cold ∅ NAHot ∅ NAWaste ∅ 4” Floor
DrainELECTRIC :Power NAVoltage NAGas:BTU NACon. ∅ NA mm
ACCESSORIES: Silt Basket, With NBR infill (Polymer fill for bend), O ring for fittinginto drain system
SPECIAL NOTE: Trough to be provided as per the flooring type coming at site.
PREFERRED MAKE AND MODEL IN ALPHABETICAL ORDERACO BLUCHER DSSCUSTOM BUILT CUSTOM BUILT CUSTOM BUILT
Integrated Solution for Hospitality ProjectsAn ISO 9001:2000 Certified Company
MD. K. Eqpt /Specs GOLDEN TEMPLE - AMRITSAR Page- 33 of 41INDIA Sector -17, Dwarka, New Delhi -110078
www.hpgconsulting.com
ITEM NO : CK-14 SLOT CHANNEL / DRAIN RAIL
QUANTITY: 2SIZE
Width:1500 mm
Depth:50+200 mm
Height:70 mm
CAPACITY
M.E.P REQUIREMENT SPECIFICATIONSPLUMBING : Channels:
Material: 2mm. thick Stainless Steel Grade: 304 PicklePassivated. Leveling bolts to adjust height. Inclusive of foul airtrap, silt basket, drainage ring (O-ring)Gully: Corrosion protected deep-drawn gully body stainlesssteel grade 304. Pickle Passivated. Gully body outer diameter is178mm, with vertical outlet size 110 mm diameters.Grating for Gully top: Anti-slip electro-polished stainless steelgrating, with load bar size 30mm X 2mm.Load Class L,according to EN1253. Gratings are made by arc-welding (notspot welding)Side bottom Inlets: 50mm Socketed Side inlet made ofStainless Steel & EPDM seal for taking indirect waste fromsurrounding kitchen equipment if any.
Cold ∅ NAHot ∅ NAWaste ∅ 4” Floor
DrainELECTRIC :Power NAVoltage NAGas:BTU NACon. ∅ NA mm
ACCESSORIES: To drain heavy waste water via in-direct drainage from foodservice equipment and kitchen floor.
SPECIAL NOTE: Modular structure for gratings with smaller individual grating to fitthe size of the channel to avoid work injury from being too heavyto bulky to handle
Slab Penetration: Requires 110mm dia waste drain connection. Requires floor cut-out and recess.Refer to WPR drawings. Location/number of drain pipes from food service equipments to becoordinated with MEP Consultant.PREFERRED MAKE AND MODEL IN ALPHABETICAL ORDERACOCUSTOM BUILT
Integrated Solution for Hospitality ProjectsAn ISO 9001:2000 Certified Company
MD. K. Eqpt /Specs GOLDEN TEMPLE - AMRITSAR Page- 34 of 41INDIA Sector -17, Dwarka, New Delhi -110078
www.hpgconsulting.com
ITEM NO : CK-16 DRAIN TROUGH GRATING
QUANTITY: 2SIZE
Width:550 mm
Depth:550 mm
Height:70 mm
CAPACITY
M.E.P REQUIREMENT SPECIFICATIONSPLUMBING : Removable S.S Grating of 304 0f suitable size with 25 mm
height. Grating with hairline finishing. Grating with 5mm thick for outside ring, 3mmthick for
interior section, Grating has to be slip-resistant for one side, Plain on the
other. Minimum Point Load: 150 kg per square meter. Spot welding not to be used. To be made in one piece/ parts to make it suitable for
lifting 70 mm Trough to be made with 16 Gauge AISI 304 SS. Trough to be provided with drain outlet at center or as
per site with all sides sloping towards drain outlet. Drain out let of the trough to have 16 gauge extension
flanges of 40 mm depth and 100 mm dia. for entry in thefloor drain.
Trough has to be fully welded with no gaps. Suitable to be for fitting with type of flooring coming at
site.
Cold ∅ NAHot ∅ NAWaste ∅ 4” Floor
DrainELECTRIC :Power NAVoltage NAGas:BTU NACon. ∅ NA mm
ACCESSORIES: Silt Basket, With NBR infill (Polymer fill for bend), O ring for fittinginto drain system
SPECIAL NOTE: Trough to be provided as per the flooring type coming at site.
PREFERRED MAKE AND MODEL IN ALPHABETICAL ORDERACO BLUCHER DSSCUSTOM BUILT CUSTOM BUILT CUSTOM BUILT
Integrated Solution for Hospitality ProjectsAn ISO 9001:2000 Certified Company
MD. K. Eqpt /Specs GOLDEN TEMPLE - AMRITSAR Page- 35 of 41INDIA Sector -17, Dwarka, New Delhi -110078
www.hpgconsulting.com
ITEM NO : CK-23 DRAIN TROUGH GRATING
QUANTITY: 2SIZE
Width:600 mm
Depth:300 mm
Height:70 mm
CAPACITY
M.E.P REQUIREMENT SPECIFICATIONSPLUMBING : Removable S.S Grating of 304 0f suitable size with 25 mm
height. Grating with hairline finishing. Grating with 5mm thick for outside ring, 3mmthick for
interior section, Grating has to be slip-resistant for one side, Plain on the
other. Minimum Point Load: 150 kg per square meter. Spot welding not to be used. To be made in one piece/ parts to make it suitable for
lifting 70 mm Trough to be made with 16 Gauge AISI 304 SS. Trough to be provided with drain outlet at center or as
per site with all sides sloping towards drain outlet. Drain out let of the trough to have 16 gauge extension
flanges of 40 mm depth and 100 mm dia. for entry in thefloor drain.
Trough has to be fully welded with no gaps. Suitable to be for fitting with type of flooring coming at
site.
Cold ∅ NAHot ∅ NAWaste ∅ 4” Floor
DrainELECTRIC :Power NAVoltage NAGas:BTU NACon. ∅ NA mm
ACCESSORIES: Silt Basket, With NBR infill (Polymer fill for bend), O ring for fittinginto drain system
SPECIAL NOTE: Trough to be provided as per the flooring type coming at site.
PREFERRED MAKE AND MODEL IN ALPHABETICAL ORDERACO BLUCHER DSSCUSTOM BUILT CUSTOM BUILT CUSTOM BUILT
Integrated Solution for Hospitality ProjectsAn ISO 9001:2000 Certified Company
MD. K. Eqpt /Specs GOLDEN TEMPLE - AMRITSAR Page- 36 of 41INDIA Sector -17, Dwarka, New Delhi -110078
www.hpgconsulting.com
ITEM NO : CK-25 DRAIN TROUGH GRATING
QUANTITY: 4SIZE
Width:3000 mm
Depth:300 mm
Height:70 mm
CAPACITY
M.E.P REQUIREMENT SPECIFICATIONSPLUMBING : Removable S.S Grating of 304 0f suitable size with 25 mm
height. Grating with hairline finishing. Grating with 5mm thick for outside ring, 3mmthick for
interior section, Grating has to be slip-resistant for one side, Plain on the
other. Minimum Point Load: 150 kg per square meter. Spot welding not to be used. To be made in one piece/ parts to make it suitable for
lifting 70 mm Trough to be made with 16 Gauge AISI 304 SS. Trough to be provided with drain outlet at center or as
per site with all sides sloping towards drain outlet. Drain out let of the trough to have 16 gauge extension
flanges of 40 mm depth and 100 mm dia. for entry in thefloor drain.
Trough has to be fully welded with no gaps. Suitable to be for fitting with type of flooring coming at
site.
Cold ∅ NAHot ∅ NAWaste ∅ 4” Floor
DrainELECTRIC :Power NAVoltage NAGas:BTU NACon. ∅ NA mm
ACCESSORIES: Silt Basket, With NBR infill (Polymer fill for bend), O ring for fittinginto drain system
SPECIAL NOTE: Trough to be provided as per the flooring type coming at site.
PREFERRED MAKE AND MODEL IN ALPHABETICAL ORDERACO BLUCHER DSSCUSTOM BUILT CUSTOM BUILT CUSTOM BUILT
Integrated Solution for Hospitality ProjectsAn ISO 9001:2000 Certified Company
MD. K. Eqpt /Specs GOLDEN TEMPLE - AMRITSAR Page- 37 of 41INDIA Sector -17, Dwarka, New Delhi -110078
www.hpgconsulting.com
ITEM NO : CM-36 SLOT CHANNEL / DRAIN RAIL
QUANTITY: 2SIZE
Width:3000 mm
Depth:50+200 mm
Height:70 mm
CAPACITY
M.E.P REQUIREMENT SPECIFICATIONSPLUMBING : Channels:
Material: 2mm. thick Stainless Steel Grade: 304 PicklePassivated. Leveling bolts to adjust height. Inclusive of foul airtrap, silt basket, drainage ring (O-ring)Gully: Corrosion protected deep-drawn gully body stainlesssteel grade 304. Pickle Passivated. Gully body outer diameter is178mm, with vertical outlet size 110 mm diameters.Grating for Gully top: Anti-slip electro-polished stainless steelgrating, with load bar size 30mm X 2mm.Load Class L,according to EN1253. Gratings are made by arc-welding (notspot welding)Side bottom Inlets: 50mm Socketed Side inlet made ofStainless Steel & EPDM seal for taking indirect waste fromsurrounding kitchen equipment if any.
Cold ∅ NAHot ∅ NAWaste ∅ 4” Floor
DrainELECTRIC :Power NAVoltage NAGas:BTU NACon. ∅ NA mm
ACCESSORIES: To drain heavy waste water via in-direct drainage from foodservice equipment and kitchen floor.
SPECIAL NOTE: Modular structure for gratings with smaller individual grating to fitthe size of the channel to avoid work injury from being too heavyto bulky to handle
Slab Penetration: Requires 110mm dia waste drain connection. Requires floor cut-out and recess.Refer to WPR drawings. Location/number of drain pipes from food service equipments to becoordinated with MEP Consultant.PREFERRED MAKE AND MODEL IN ALPHABETICAL ORDERACOCUSTOM BUILT
Integrated Solution for Hospitality ProjectsAn ISO 9001:2000 Certified Company
MD. K. Eqpt /Specs GOLDEN TEMPLE - AMRITSAR Page- 38 of 41INDIA Sector -17, Dwarka, New Delhi -110078
www.hpgconsulting.com
ITEM NO : CM-40 SLOT CHANNEL / DRAIN RAIL
QUANTITY: 1SIZE
Width:1500 mm
Depth:50+200 mm
Height:70 mm
CAPACITY
M.E.P REQUIREMENT SPECIFICATIONSPLUMBING : Channels:
Material: 2mm. thick Stainless Steel Grade: 304 PicklePassivated. Leveling bolts to adjust height. Inclusive of foul airtrap, silt basket, drainage ring (O-ring)Gully: Corrosion protected deep-drawn gully body stainlesssteel grade 304. Pickle Passivated. Gully body outer diameter is178mm, with vertical outlet size 110 mm diameters.Grating for Gully top: Anti-slip electro-polished stainless steelgrating, with load bar size 30mm X 2mm.Load Class L,according to EN1253. Gratings are made by arc-welding (notspot welding)Side bottom Inlets: 50mm Socketed Side inlet made ofStainless Steel & EPDM seal for taking indirect waste fromsurrounding kitchen equipment if any.
Cold ∅ NAHot ∅ NAWaste ∅ 4” Floor
DrainELECTRIC :Power NAVoltage NAGas:BTU NACon. ∅ NA mm
ACCESSORIES: To drain heavy waste water via in-direct drainage from foodservice equipment and kitchen floor.
SPECIAL NOTE: Modular structure for gratings with smaller individual grating to fitthe size of the channel to avoid work injury from being too heavyto bulky to handle
Slab Penetration: Requires 110mm dia waste drain connection. Requires floor cut-out and recess.Refer to WPR drawings. Location/number of drain pipes from food service equipments to becoordinated with MEP Consultant.PREFERRED MAKE AND MODEL IN ALPHABETICAL ORDERACOCUSTOM BUILT
Integrated Solution for Hospitality ProjectsAn ISO 9001:2000 Certified Company
MD. K. Eqpt /Specs GOLDEN TEMPLE - AMRITSAR Page- 39 of 41INDIA Sector -17, Dwarka, New Delhi -110078
www.hpgconsulting.com
ITEM NO : CM-45 DRAIN TROUGH GRATING
QUANTITY: 6SIZE
Width:550 mm
Depth:550 mm
Height:70 mm
CAPACITY
M.E.P REQUIREMENT SPECIFICATIONSPLUMBING : Removable S.S Grating of 304 0f suitable size with 25 mm
height. Grating with hairline finishing. Grating with 5mm thick for outside ring, 3mmthick for
interior section, Grating has to be slip-resistant for one side, Plain on the
other. Minimum Point Load: 150 kg per square meter. Spot welding not to be used. To be made in one piece/ parts to make it suitable for
lifting 70 mm Trough to be made with 16 Gauge AISI 304 SS. Trough to be provided with drain outlet at center or as
per site with all sides sloping towards drain outlet. Drain out let of the trough to have 16 gauge extension
flanges of 40 mm depth and 100 mm dia. for entry in thefloor drain.
Trough has to be fully welded with no gaps. Suitable to be for fitting with type of flooring coming at
site.
Cold ∅ NAHot ∅ NAWaste ∅ 4” Floor
DrainELECTRIC :Power NAVoltage NAGas:BTU NACon. ∅ NA mm
ACCESSORIES: Silt Basket, With NBR infill (Polymer fill for bend), O ring for fittinginto drain system
SPECIAL NOTE: Trough to be provided as per the flooring type coming at site.
PREFERRED MAKE AND MODEL IN ALPHABETICAL ORDERACO BLUCHER DSSCUSTOM BUILT CUSTOM BUILT CUSTOM BUILT
Integrated Solution for Hospitality ProjectsAn ISO 9001:2000 Certified Company
MD. K. Eqpt /Specs GOLDEN TEMPLE - AMRITSAR Page- 40 of 41INDIA Sector -17, Dwarka, New Delhi -110078
www.hpgconsulting.com
ITEM NO : CM-50 DRAIN TROUGH GRATING
QUANTITY: 4SIZE
Width:(3) 3000 mm(1) 1500mm
Depth:300 mm
Height:70 mm
CAPACITY
M.E.P REQUIREMENT SPECIFICATIONSPLUMBING : Removable S.S Grating of 304 0f suitable size with 25 mm
height. Grating with hairline finishing. Grating with 5mm thick for outside ring, 3mmthick for
interior section, Grating has to be slip-resistant for one side, Plain on the
other. Minimum Point Load: 150 kg per square meter. Spot welding not to be used. To be made in one piece/ parts to make it suitable for
lifting 70 mm Trough to be made with 16 Gauge AISI 304 SS. Trough to be provided with drain outlet at center or as
per site with all sides sloping towards drain outlet. Drain out let of the trough to have 16 gauge extension
flanges of 40 mm depth and 100 mm dia. for entry in thefloor drain.
Trough has to be fully welded with no gaps. Suitable to be for fitting with type of flooring coming at
site.
Cold ∅ NAHot ∅ NAWaste ∅ 4” Floor
DrainELECTRIC :Power NAVoltage NAGas:BTU NACon. ∅ NA mm
ACCESSORIES: Silt Basket, With NBR infill (Polymer fill for bend), O ring for fittinginto drain system
SPECIAL NOTE: Trough to be provided as per the flooring type coming at site.
PREFERRED MAKE AND MODEL IN ALPHABETICAL ORDERACO BLUCHER DSSCUSTOM BUILT CUSTOM BUILT CUSTOM BUILT
Integrated Solution for Hospitality ProjectsAn ISO 9001:2000 Certified Company
MD. K. Eqpt /Specs GOLDEN TEMPLE - AMRITSAR Page- 41 of 41INDIA Sector -17, Dwarka, New Delhi -110078
www.hpgconsulting.com
ITEM NO : CM-52 DRAIN TROUGH GRATING
QUANTITY: 3SIZE
Width:2800 mm
Depth:1800 mm
Height:70 mm
CAPACITY
M.E.P REQUIREMENT SPECIFICATIONSPLUMBING : Removable S.S Grating of 304 0f suitable size with 25 mm
height. Grating with hairline finishing. Grating with 5mm thick for outside ring, 3mmthick for
interior section, Grating has to be slip-resistant for one side, Plain on the
other. Minimum Point Load: 150 kg per square meter. Spot welding not to be used. To be made in one piece/ parts to make it suitable for
lifting 70 mm Trough to be made with 16 Gauge AISI 304 SS. Trough to be provided with drain outlet at center or as
per site with all sides sloping towards drain outlet. Drain out let of the trough to have 16 gauge extension
flanges of 40 mm depth and 100 mm dia. for entry in thefloor drain.
Trough has to be fully welded with no gaps. Suitable to be for fitting with type of flooring coming at
site.
Cold ∅ NAHot ∅ NAWaste ∅ 4” Floor
DrainELECTRIC :Power NAVoltage NAGas:BTU NACon. ∅ NA mm
ACCESSORIES: Silt Basket, With NBR infill (Polymer fill for bend), O ring for fittinginto drain system
SPECIAL NOTE: Trough to be provided as per the flooring type coming at site.
PREFERRED MAKE AND MODEL IN ALPHABETICAL ORDERACO BLUCHER DSSCUSTOM BUILT CUSTOM BUILT CUSTOM BUILT