amx network communications
TRANSCRIPT
network/communication
Metreau Entry Communicators
(view and greet visitors at doors/gates) ............................248 - 251
SIP Communications Gateways
(enables touch panels to make/receive telephone calls) ....252 - 257
Accessories .......................................................................258 - 265
246 US SALES AND SUPPORT 800.222.0193 • INTERNATIONAL SALES AND SUPPORT +1.469.624.7400 • www.amx.com© May 2009 AMX. All rights reserved. AMX does not assume responsibility for any errors or omissions.
introDuction network/communication
AMX MVP-8400iTouch Panel w/ Intercom
AMX NXD-700ViTouch Panel w/ Intercom
AMX NXD-1000ViTouch Panel w/ intercom
AMX NXA-WAP250G802.11b/g Wireless Access Point
AMX NXA-ENET24Managed Ethernet Switch
AMX MVP-5200iTouch Panel w/ Intercom
AMX SIP Communications Gateway 544(back panel)
IP Phone
IP Phone
VoIP Service Provider
IP Phone
Public TelephoneNetwork
AMX NXD-500iTouch Panel w/ Intercom
AMX MET-ECOMMetreau Entry Communicator
Wireless - WiFi
Ethernet
Analog
BRIDGE THE COMMUNICATION GAPDown the Hall or Around the World, AMX Can Make it Happen
As the A/V and IT industries continue to converge, AMX continues to bridge the gap between these cutting-edge
technologies. Whether your customer wants to deliver voice or video communications down the hall or around the
world, AMX has an arsenal of products designed to make it happen. From WiFi and ZigBee to the Apple® iPhone, AMX is
leveraging our A/V system experience to take advantage of other new communication and network technologies/products
effectively extending our reach and our customers ability to reach around the world – now that’s flexible communication.
SYSTEM DIAGRAM
This drawing shows a Communications Gateway connecting an
AMX system to the public telephone network to enable telephone
calls to/from a touch panel an. The Communications Gateway
is acting as a PBX allowing phones and touch panels within a
building to call one another as well as to make outside calls.
2473000 RESEARCH DRIVE, R ICHARDSON, TX 75082 • 800.222.0193 • 469.624.7153 fax • TECHNICAL SUPPORT 800.932.6993© May 2009 AMX. All rights reserved. AMX does not assume responsibility for any errors or omissions.
introDuction network/communication
AMX MVP-8400iTouch Panel w/ Intercom AMX NXD-700Vi
Touch Panel w/ Intercom
AMX NXD-1000ViTouch Panel w/ Intercom
AMX NXA-WAP250G802.11b/g Wireless Access Point
AMX NXA-ENET24Managed Ethernet Switch
IP Phone
IP Phone
VoIP Service Provider
IP Phone
Public TelephoneNetwork
Analog Phone
Digital/Analog Phone
IP Phone
Cell Phone
Internet
AMX SIP Communications Gateway 544(back panel)
AMX NXD-500iTouch Panel w/ Intercom
AMX MET-ECOMMetreau Entry Communicator
Wireless - Cell Phone
Wireless - WiFi
Ethernet
Analog
SYSTEM DIAGRAM (CONT.)
Touch Panels Brochure
Want to see our Touch Pane ls in
ac t ion? Just v is i t http : / /www.
amx.com/assets/ l i terature/
TP.Brochure.pdf to download the
la tes t l i te ra ture .
Keypads Brochure
Want to see our Keypads in
ac t ion? Just v is i t http : / /www.
amx.com/assets/ l i terature/
TP.Brochure.pdf to download the
la tes t l i te ra ture .
network/communication
248 US SALES AND SUPPORT 800.222.0193 • INTERNATIONAL SALES AND SUPPORT +1.469.624.7400 • www.amx.com© May 2009 AMX. All rights reserved. AMX does not assume responsibility for any errors or omissions.
OVERVIEW
The Metreau Entry Communicator enables doorbell notification
to residents of hotels, homes, or condos from visitors at doors
and gates. With the addition of an AMX Modero intercom touch
panel, residents can see visitors via an integrated one-way color
camera, have two-way audio conversations, and open doors or
gates. Adding the AMX SIP Communication Gateway will also
enable residents to communicate with visitors from any telephone
throughout the business or residence.
COMMON APPLICATION
Ideal for placement in residential outdoor entryways or next to
doors to notify residents that visitors have arrived.
FEATURES
• 2-way VoIP audio to an intercom-enabled Modero Touch Panel
• 1-way video conferencing with any Touch Panel
• Includes I/Os and Relays
• Dual-color LED button provides feedback and doorbell
notification
• Small form factor and shallow depth make for easy installation
• VoIP integration allows an unlimited number of entry
communicators to be accommodated per system
• Camera angle can be easily positioned during installation to
allow viewing of guests at door or gate
• Power over Ethernet
• Weather-resistant
ONLINE www.amx.com/products/MET-ECOM.asp
MET-ECOMMetreau Entry Communicator
MET-ECOM-BK Black (FG2180-01-BK)
MET-ECOM-WH White (FG2180-01-WH)
MET-ECOM-PB Polished Brass (FG2180-01-PB)
MET-ECOM-AB Antique Brass (FG2180-01-AB)
MET-ECOM-SS Stainless Steel (FG2180-01-SS)
MET-ECOM-BP Brushed Pewter (FG2180-01-BP)
EXPerience Kit(s) Available, see page 614
A CLOSER LOOK
Video Camera
Speaker
Microphone
Camera Viewing Angle Adjustment
Ethernet Connect ion
2 Mult i -Purpose I /Os (5V)
2 Low Vol tage Relays (1A Contact)
Dual Color LED Status Bar (Yel low / Red)
Pushbutton (Doorbel l )
TRAINING AVAILABLE
For impor tant ins ta l la t ion , conf igura t ion and programming techn iques ,
AMX Un ivers i ty t ra in ing is ava i lab le . Jus t v is i t www.amx.com/products/
MET-ECOM.asp and cl ick on the “Tra in ing” tab .
2493000 RESEARCH DRIVE, R ICHARDSON, TX 75082 • 800.222.0193 • 469.624.7153 fax • TECHNICAL SUPPORT 800.932.6993© May 2009 AMX. All rights reserved. AMX does not assume responsibility for any errors or omissions.
met-ecom network/communication
SPECIFICATIONS
DIMENSIONS (HWD)
5 3/8” x 3 5/8” x 1 9/16” (13.62 cm x 9.13 cm x 3.96 cm)
WEIGHT
14.4 oz (408 g)
POWER REqUIREMENT
• PoE powered – no local Power Supply needed• IEEE 802.3af Compliant
FRONT PANEL COMPONENTS
• Integrated Color Video Camera• Speaker• Dual Color LED Status Bar: (Yellow/ Red) can be used to provide feedback,
to attract attention for action, or as general indicator• Pushbutton (Doorbell)• Microphone
INTEGRATED COLOR VIDEO CAMERA
• QVGA 320 x 240• Supports Motion JPEG (MJPEG) and H.263 codecs• Viewing Angle: 42º
SPEAkER
• 8 Ohm, 2W• 80dB SPL (sound pressure level at 1 meter)• Meets G.711 sound standard
MICROPHONE
• -40 dB sensitivity, built-in echo cancellation (telephone quality)• Full duplex communication• VoIP Telephony
REAR PANEL COMPONENTS
• Camera Viewing Angle Adjustment• Ethernet Port – 10/100 Ethernet with PoE. LEDs show communication activity,
connection status, speeds, and mode information: - SPD (speed) – Green LED lights On when the connection speed is 100 Mbps
and turns Off when the speed is 10 Mbps - L/A (link/activity) – Orange LED lights On when the Ethernet cables are
connected and terminated correctly and blinks when receiving Ethernet data packets
• 2 Multi-Purpose I/Os (5V): 2-channel binary I/O ports for contact closure with each input being capable of voltage sensing. Input format is software select able with interactive power sensing for IR ports
• 2 Low Voltage Relays (1A contact): 2-channel singlepole single throw relay ports with each relay being independently controlled and supporting up to 2 independent external relay devices
RECOMMENDED ACCESSORIES DESCRIPTION PART # ONLINE PAGE #
PS-POE-AF Power over Ethernet Injector (FG423-80) www.amx.com/products/PS-POE-AF.asp 240NXA-ENET24 Managed Ethernet Switch (FG2178-60) www.amx.com/products/NXA-ENET24.asp NXA-ENET24PoE Managed Ethernet Switch, Power Over Ethernet (FG2178-61) www.amx.com/products/NXA-ENET24.asp CB-MET-ECOM Rough-In Box (FG039-12) www.amx.com/products/CB-MET-ECOM.asp 265
MOUNTING
• The MET-ECOM is installed in one of two ways: • 4 screws for hard surface mounting • 2 expansion clips for pressure mounting
COLORS AVAILABLE
• Black MET-ECOM-BK (FG2180-01-BK)• White MET-ECOM-WH (FG2180-01-WH)• Polished Brass MET-ECOM-PB (FG2180-01-PB)• Antique Brass MET-ECOM-AB (FG2180-01-AB) • Stainless Steel MET-ECOM-SS (FG2180-01-SS)• Brushed Pewter MET-ECOM-BP (FG2180-01-BP)
ENVIRONMENTAL
• Operating Temperature: -22º – 140º F (-30º – 60º C)• Heat Dissipation (Typical): 20.5 BTU/hr
INCLUDED ACCESSORIES
Installation Kit- includes front mount flange, 4 installation screws (#4-40 x 3.12), 2 Phoenix connectors (female, 3.5mm) and a Ferrite clip
network/communication
250 US SALES AND SUPPORT 800.222.0193 • INTERNATIONAL SALES AND SUPPORT +1.469.624.7400 • www.amx.com© May 2009 AMX. All rights reserved. AMX does not assume responsibility for any errors or omissions.
OVERVIEW
The Metreau Entry Communicator with display enables doorbell
notification to residents of hotels, homes, or condos from visitors
at doors and gates. With the addition of an AMX Modero
Intercom-Enabled Touch Panel, residents can see visitors via
an integrated one-way color camera, have two-way audio
conversations, and open doors or gates. By taking advantage of
the integrated 1.6“ display (not weather-resistant), users have the
option of placing custom logos, personalized greeting messages,
privacy notifications and other announcements (e.g. “Welcome,”
“Do Not Disturb,” “Make up Room”) on the display. Adding the
AMX SIP Communication Gateway will also enable residents to
communicate with visitors from any telephone throughout the
business or residence.
COMMON APPLICATION
Ideal for residences to allow display of street address or family
name or hotel rooms to display room or number or message for
housekeeping or visitors.
FEATURES
• 2-way VoIP audio to an intercom-enabled Modero Touch Panel
• OLED display for personalized messaging
• 1-way video conferencing with any Touch Panel
• Includes I/Os and Relays
• Dual-color LED button provides feedback and
doorbell notification
• Small form factor and shallow depth make for easy installation
• VoIP integration allows an unlimited number of entry
communicators to be accommodated per system
• Camera angle can be easily positioned during installation to
allow viewing of guests at door or gate
• Power over Ethernet
ONLINE www.amx.com/products/MET-ECOM-D.asp
MET-ECOM-DMetreau Entry Communicator w/Display
MET-ECOM-D-BK Black (FG2180-05-BK)
MET-ECOM-D-WH White (FG2180-05-WH)
MET-ECOM-D-PB Polished Brass (FG2180-05-PB)
MET-ECOM-D-AB Antique Brass (FG2180-05-AB)
MET-ECOM-D-SS Stainless Steel (FG2180-05-SS)
MET-ECOM-D-BP Brushed Pewter (FG2180-05-BP)
EXPerience Kit(s) Available, see page 614
A CLOSER LOOK
Video Camera
OLED Display
Speaker
Microphone
Dual Color LED Status Bar (Yel low / Red)
Pushbutton (Doorbel l )
Camera Viewing Angle Adjustment
Ethernet Connect ion
2 Mult i -Purpose I /Os (5V)
2 Low Vol tage Relays (1A Contact)
TRAINING AVAILABLE
For impor tant ins ta l la t ion , conf igura t ion and programming techn iques ,
AMX Un ivers i ty t ra in ing is ava i lab le . Jus t v is i t www.amx.com/products/
MET-ECOM-D.asp and cl ick on the “Tra in ing” tab .
2513000 RESEARCH DRIVE, R ICHARDSON, TX 75082 • 800.222.0193 • 469.624.7153 fax • TECHNICAL SUPPORT 800.932.6993© May 2009 AMX. All rights reserved. AMX does not assume responsibility for any errors or omissions.
met-ecom-D network/communication
SPECIFICATIONS
DIMENSIONS (HWD)
5 3/8” x 3 5/8” x 1 9/16” (13.62 cm x 9.13 cm x 3.96 cm)
WEIGHT
14.4 oz (408 g)
POWER REqUIREMENT
• PoE powered – no local Power Supply needed• IEEE 802.3af Compliant
FRONT PANEL COMPONENTS
• OLED Display• Integrated Color Video Camera• Speaker• Dual Color LED Status Bar: (Yellow/ Red) can be used to provide feedback,
to attract attention for action, or as general indicator• Pushbutton (Doorbell)• Microphone
OLED DISPLAY
• 4-bit Gray Scale• 1.6” Diagonal Display• 180° Viewing Angle• 2000: 1 Contrast Ratio• Unit stores up to 50 .bmp images
INTEGRATED COLOR VIDEO CAMERA
• QVGA 320 x 240• Supports Motion JPEG (MJPEG) and H.263 codecs.• Viewing Angle: 42º
SPEAkER
• 8 Ohm, 2W• 80dB SPL (sound pressure level at 1 meter)• Meets G.711 sound standard
MICROPHONE
• -40 dB sensitivity, built-in echo cancellation (telephone quality)• Full duplex communication• VoIP Telephony
REAR PANEL COMPONENTS
• Camera Viewing Angle Adjustment• Ethernet Port – 10/100 Ethernet with PoE. LED show communication activity, connection status, speeds, and mode information: - SPD (speed) – Green LED lights On when the connection speed is 100 Mbps and turns Off when the speed is 10 Mbps - L/A (link/activity) – Orange LED lights On when the Ethernet cables are connected and terminated correctly, and blinks when receiving Ethernet data packets.• 2 Multi-Purpose I/Os (5V): 2-channel binary I/O ports for contact closure with each input being capable of voltage sensing. Input format is software selectable with interactive power sensing for IR ports.• 2 Low Voltage Relays (1A contact): 2-channel single-pole single throw relay ports with each relay being independently controlled and supporting up to 2 independent external relay devices.
MOUNTING
The MET-ECOM-D is installed in one of two ways: • 4 screws for hard surface mounting • 2 expansion clips for pressure mounting
COLORS AVAILABLE
• Black MET-ECOM-BK (FG2408-01-BK)• White MET-ECOM-WH (FG2408-01-WH)• Polished Brass MET-ECOM-PB (FG2408-01-PB)• Antique Brass MET-ECOM-AB (FG2408-01-AB)• Stainless Steel MET-ECOM-SS (FG2408-01-SS)• Brushed Pewter MET-ECOM-BP (FG2408-01-BP)
CERTIFICATIONS
FCC Class B, CE, IEC60950, RoHS
ENVIRONMENTAL
• Operating Temperature: 32º – 104º F (0º – 40º C)• Heat Dissipation (Typical): 20.5 BTU/hr
INCLUDED ACCESSORIES
Installation Kit- includes front mount flange, 4 installation screws (#4-40 x 3.12), 2 Phoenix connectors (female, 3.5mm) and a Ferrite clip
RECOMMENDED ACCESSORIES DESCRIPTION PART # ONLINE PAGE #
PS-POE-AF Power over Ethernet Injector (FG423-80) www.amx.com/products/PS-POE-AF.asp 240NXA-ENET24 Managed Ethernet Switch (FG2178-60) www.amx.com/products/NXA-ENET24.asp NXA-ENET24PoE Managed Ethernet Switch, Power Over Ethernet (FG2178-61) www.amx.com/products/NXA-ENET24.asp CB-MET-ECOM Rough-In Box (FG039-12) www.amx.com/products/CB-MET-ECOM.asp 265
network/communication
252 US SALES AND SUPPORT 800.222.0193 • INTERNATIONAL SALES AND SUPPORT +1.469.624.7400 • www.amx.com© May 2009 AMX. All rights reserved. AMX does not assume responsibility for any errors or omissions.
OVERVIEW
The CSG-500 SIP Communications Gateway is a stand alone PBX
(Private Branch Exchange) that allows intercom-enabled Modero
Touch Panels to be transformed into full-featured IP phones. The
CSG can be configured to support a maximum of 50 users (or
extensions) and will support up to 25 concurrent calls. With the
CSG and an intercom-enabled Modero Touch Panel, you have
access to phone features like call waiting, caller ID, call queuing,
and voice mail. The CSG supports AMX Session Initiated Protocol
(SIP)-enabled touch panels, which include the MVP-8400i, NXD-
1000Vi, and NXD-700Vi, as well as third-party SIP phones. The
CSG-500 runs a version of Asterisk which is an industry standard
for VoIP PBX systems.
COMMON APPLICATION
Ideal for installation in residences and commercial applications
where there is a need for SIP-enabled touch panels to make
or receive phone calls from other touch panels or telephones
anywhere in the world.
FEATURES
• Local, long distance, and international calling via VoIP service
providers
• Caller ID, call waiting, call groups, call queuing, IVR support and
voice mail
• Uses Session Initiation Protocol, the standard for VoIP technology
• Supports both AMX SIP-enabled touch panels and third-party
SIP phones
• Supports up to 50 users and 25 concurrent calls
ONLINE www.amx.com/products/CSG-500.asp
SPECIFICATIONS
DIMENSIONS (HWD)
• 1 3/4” x 11 1/2” x 51/2” (4.41 cm x 29.09 cm x 13.82 cm)• RU: 1
WEIGHT
2.25 lbs (1.02 kg)
ENCLOSURE
Metal with black matte finish
POWER REqUIREMENTS
Constant current draw: 2.6 A @ 12 VDC
MEMORY
• 8MB on board serial Flash memory• 64MB 16-bit parallel SDRAM
CERTIFICATIONS
FCC (Class A), CE, IEC60950, and RoHS
ENVIRONMENTAL
• Operating Temperature: 0° C (32° F) – 40° C (104° F)• Operating Humidity: 5% – 85% RH Non-Condensing• Storage Temperature: -20° C (-4° F) – 70° C (158° F)• Storage Humidity: 0% – 85% RH Non-Condensing• Heat Dissipation (Typical): 106.6 BTU/hr
FRONT PANEL COMPONENTS
• Power LED: Indicates whether the unit is turned on and receiving power.• Network LED: Indicates whether a network cable is connected and the speed
of the network.• IP Phones LEDs: Indicates whether the corresponding link is connected and the
speed of the link.• Analog LEDs: Indicates whether the analog port is installed and the type of
port (FXO/FXS) installed. (Not available on all models.)
REAR PANEL COMPONENTS
• Power Connector: 5.1mm OD, 2.1mm pin, 12V 3.0A center positive• Configuration Reset Switch: Resets the current configuration to the factory
default when pressed.• Console port: 1 RJ45 10/100baseT port for console (craft) port serial control• Network port: 1 RJ45 10/100baseT port for a general (WAN) connection• IP phones ports: 4 RJ45 10/100baseT ports for IP phone connections
INCLUDED ACCESSORIES
• PS5.0, Power Supply, 5.0A, 12.0VDC (FG423-31)• CSG SIP Communications Gateway Installation Guide (93-2182-01)• 2 Surface mounting brackets (62-2182-04)• 4 #4-40 X .250 PPH screws (80-0112)
CSG-500SIP Communications GatewayCSG-500 SIP Gateway for 50 Users (FG2182-01)
RECOMMENDED ACCESSORIES DESCRIPTION PART # ONLINE PAGE #
AC-DIN DIN Rail Mounting Bracket (FG532-06) www.amx.com/products/AC-DIN.asp 235
TRAINING AVAILABLE
For impor tant ins ta l la t ion , conf igura t ion and programming techn iques ,
AMX Un ivers i ty t ra in ing is ava i lab le . Jus t v is i t www.amx.com/products/
CSG-500.asp and cl ick on the “Tra in ing” tab .
2533000 RESEARCH DRIVE, R ICHARDSON, TX 75082 • 800.222.0193 • 469.624.7153 fax • TECHNICAL SUPPORT 800.932.6993© May 2009 AMX. All rights reserved. AMX does not assume responsibility for any errors or omissions.
cSG-500 network/communication
A CLOSER LOOK
Power 12VDC
Analog IP Phones Network Power
NetworkPort
Unused PortsConf igurat ionPort
IP PhoneInput (4)
network/communication
254 US SALES AND SUPPORT 800.222.0193 • INTERNATIONAL SALES AND SUPPORT +1.469.624.7400 • www.amx.com© May 2009 AMX. All rights reserved. AMX does not assume responsibility for any errors or omissions.
CSG-544SIP Communications GatewayCSG-544 SIP Gateway for 50 Users, (FG2182-02)
4 analog phone input ports, 4 PSTN output ports
RECOMMENDED ACCESSORIES DESCRIPTION PART # ONLINE PAGE #
AC-DIN DIN Rail Mounting Bracket (FG532-06) www.amx.com/products/AC-DIN.asp 235
TRAINING AVAILABLE
For impor tant ins ta l la t ion , conf igura t ion and programming techn iques ,
AMX Un ivers i ty t ra in ing is ava i lab le . Jus t v is i t www.amx.com/products/
CSG-544.asp and cl ick on the “Tra in ing” tab .
OVERVIEW
The CSG-544 is a stand alone PBX (Private Branch Exchange)
that enables any intercom-enabled Modero Touch Panels to
be transformed into full-featured IP phones. It also includes the
capability to support 4 analog (POTS) telephones and up to 4
external phone lines from a PSTN (your local telephone company)
or analog PBX. The CSG supports AMX Session Initiated Protocol
(SIP)-enabled touch panels, which include the MVP-8400i, NXD-
1000Vi, and NXD-700Vi, as well as third-party SIP phones. The
CSG-544 runs Asterisk, an industry standard for VoIP PBX systems
and can function not only as a PBX, but also as VoIP ATA, or VoIP
gateway. It has 8 analog ports that provide the user with 4 Foreign
Exchange Office (FXO) ports and 4 Foreign Exchange Station
(FXS) ports. The FXO ports connect to a PSTN and the FXS ports
are used to add older technology analog phones to the system.
COMMON APPLICATION
Ideal for installation where there is a need for SIP-enabled touch
panels to make or receive phone calls from other touch panels or
telephones as well as support for 4 analog phones and up to 4
lines of local and long distance calling capability via a PSTN.
FEATURES
• Local, long distance, and international calling via VoIP service
providers or local PSTN (where certified)
• Caller ID, call waiting, call groups, call queuing, IVR support and
voice mail
• Uses Session Initiation Protocol, the standard for VoIP technology
• Supports AMX SIP-enabled touch panels, third-party SIP
phones, and up to 4 analog (POTS) telephones
• Supports up to 50 users and 25 concurrent calls
ONLINE www.amx.com/products/CSG-544.asp
SPECIFICATIONS
DIMENSIONS (HWD)
• 1 3/4” x 11 1/2” x 51/2” (4.41 cm x 29.09 cm x 13.82 cm)• RU: 1
WEIGHT
2.25 lbs (1.02 kg)
ENCLOSURE
Metal with black matte finish
POWER REqUIREMENTS
Constant current draw: 2.6 A @ 12 VDC
MEMORY
• 8MB on board serial Flash memory • 64MB 16-bit parallel SDRAM
CERTIFICATIONS
FCC (Class A), CE, IEC60950, and RoHS
ENVIRONMENTAL
• Operating Temperature: 0° C (32° F) – 40° C (104° F)• Operating Humidity: 5% – 85% RH Non-Condensing• Storage Temperature: -20° C (-4° F) – 70° C (158° F)• Storage Humidity: 0% – 85% RH Non-Condensing• Heat Dissipation (Typical): 106.6 BTU/hr
FRONT PANEL COMPONENTS
• Power LED: Indicates whether the unit is turned on and receiving power.• Network LED: Indicates whether a network cable is connected and the speed
of the network.• IP Phones LEDs: Indicates whether the corresponding link is connected and the
speed of the link.• Analog LEDs: Indicates whether the analog port is installed and the type ofport
(FXO/FXS) installed. (Not available on all models.)
REAR PANEL COMPONENTS
• Power Connector: 5.1mm OD, 2.1mm pin, 12V 3.0A center positive• Configuration Reset Switch: Resets the current configuration to the factory default when pressed.• Console port: 1 RJ45 10/100baseT port for console (craft) port serial control• Network port: 1 RJ45 10/100baseT port for a general (WAN) connection• IP phones ports: 4 RJ45 10/100baseT ports for IP phone connections• Analog ports: 4 for FXO and 4 for FXS connections
INCLUDED ACCESSORIES
• PS5.0, Power Supply, 5.0A, 12.0VDC (FG423-31)• CSG SIP Communications Gateway Installation Guide (93-2182-01)• 2 Surface mounting brackets (62-2182-04)• 4 #4-40 X .250 PPH screws (80-0112)
2553000 RESEARCH DRIVE, R ICHARDSON, TX 75082 • 800.222.0193 • 469.624.7153 fax • TECHNICAL SUPPORT 800.932.6993© May 2009 AMX. All rights reserved. AMX does not assume responsibility for any errors or omissions.
cSG-544 network/communication
A CLOSER LOOK
Power 12VDC
Analog IP Phones Network Power
NetworkPort
Conf igurat ionPort
IP PhoneInput (4)
Analog PhonesLines In (4)
Analog PhonesLines Out (4)
AMX NXD-700ViTouch Panel
AMX NXA-ENET24Managed Ethernet Switch
AMX SIP Communications Gateway 544(back panel)
Public TelephoneNetwork
Cell Phone
AMX NetLinx NI-700Integrated Controller
(back panel)
VoIP Service Provider
Internet
Analog Phone
Analog Phone
IP Phone
Wireless - Cell Phone
Ethernet
Analog
network/communication
256 US SALES AND SUPPORT 800.222.0193 • INTERNATIONAL SALES AND SUPPORT +1.469.624.7400 • www.amx.com© May 2009 AMX. All rights reserved. AMX does not assume responsibility for any errors or omissions.
OVERVIEW
The CSG-580 is a stand alone PBX (Private Branch Exchange)
that enables any intercom-enabled Modero Touch Panels to
be transformed into full-featured IP phones. It also includes the
capability to support up to 8 external phone lines from a PSTN
(your local telephone company) or analog PBX. With the CSG and
an intercom-enabled Modero Touch Panel, you have access to a
variety of robust calling features. The CSG supports AMX Session
Initiated Protocol (SIP)-enabled touch panels, which include the
MVP-8400i, NXD-1000Vi, and NXD-700Vi, as well as third-party IP
phones. The CSG-580 runs Asterisk, an industry standard for VoIP
PBX systems. It has eight analog ports that provide the user with 8
Foreign Exchange Office (FXO) ports to connect to a PSTN.
COMMON APPLICATION
Ideal for installation in residences and commercial applications
where there is a need for SIP enabled touch panels to make
or receive phone calls from other touch panels or telephones
anywhere in the world as well as support for up to 8 lines of
external local, long distance and international telephone calling
capability via a PSTN.
FEATURES
• Local, long distance, and international calling via VoIP service
providers or local PSTN (where certified)
• Caller ID, call waiting, call groups, call queuing, IVR support, and
voice mail
• Uses Session Initiation Protocol, the standard for VoIP technology
• Supports both AMX SIP-enabled touch panels and third-party
SIP phones
• Supports up to 50 users and 25 concurrent calls
ONLINE www.amx.com/products/CSG-580.asp
SPECIFICATIONS
DIMENSIONS (HWD)
• 1 3/4” x 11 1/2” x 51/2” (4.41 cm x 29.09 cm x 13.82 cm)• RU: 1
WEIGHT
2.25 lbs (1.02 kg)
ENCLOSURE
Metal with black matte finish
POWER REqUIREMENTS
Constant current draw: 2.6 A @ 12 VDC
MEMORY
• 8MB on board serial Flash memory • 64MB 16-bit parallel SDRAM
CERTIFICATIONS
FCC (Class A), CE, IEC60950, and RoHS
ENVIRONMENTAL
• Operating Temperature: 0° C (32° F) – 40° C (104° F)• Operating Humidity: 5% – 85% RH Non-Condensing• Storage Temperature: -20° C (-4° F) – 70° C (158° F)• Storage Humidity: 0% – 85% RH Non-Condensing• Heat Dissipation (Typical): 106.6 BTU/hr
FRONT PANEL COMPONENTS
• Power LED: Indicates whether the unit is turned on and receiving power.• Network LED: Indicates whether a network cable is connected and the speed of the network.• IP Phones LEDs: Indicates whether the corresponding link is connected and the speed of the link.• Analog LEDs: Indicates whether the analog port is installed and the type of port (FXO/FXS) installed. (Not available on all models.)
REAR PANEL COMPONENTS
• Power Connector: 5.1mm OD, 2.1mm pin, 12V 3.0A center positive• Configuration Reset Switch: Resets the current configuration to the factory default when pressed.• Console port: 1 RJ45 10/100baseT port for console (craft) port serial control• Network port: 1 RJ45 10/100baseT port for a general (WAN) connection• IP phones ports: 4 RJ45 10/100baseT ports for IP phone connections• Analog Ports: 8 RJ11 ports for FXO connections
INCLUDED ACCESSORIES
• PS5.0, Power Supply, 5.0A, 12.0VDC (FG423-31)• CSG SIP Communications Gateway Installation Guide (93-2182-01)• 2 Surface mounting brackets (62-2182-04)• 4 #4-40 X .250 PPH screws (80-0112)
CSG-580SIP Communications GatewayCSG-580 SIP Gateway for 50 Users, (FG2182-03)
8 PSTN lines
RECOMMENDED ACCESSORIES DESCRIPTION PART # ONLINE PAGE #
AC-DIN DIN Rail Mounting Bracket (FG532-06) www.amx.com/products/AC-DIN.asp 235
TRAINING AVAILABLE
For impor tant ins ta l la t ion , conf igura t ion and programming techn iques ,
AMX Un ivers i ty t ra in ing is ava i lab le . Jus t v is i t www.amx.com/products/
CSG-580.asp and cl ick on the “Tra in ing” tab .
2573000 RESEARCH DRIVE, R ICHARDSON, TX 75082 • 800.222.0193 • 469.624.7153 fax • TECHNICAL SUPPORT 800.932.6993© May 2009 AMX. All rights reserved. AMX does not assume responsibility for any errors or omissions.
cSG-580 network/communication
A CLOSER LOOK
Power 12VDC
Analog IP Phones Network Power
NetworkPort
Conf igurat ionPort
IP PhoneInput (4)
Analog PhonesLines Out (8)
network/communication
258 US SALES AND SUPPORT 800.222.0193 • INTERNATIONAL SALES AND SUPPORT +1.469.624.7400 • www.amx.com© May 2009 AMX. All rights reserved. AMX does not assume responsibility for any errors or omissions.
NXA-WAP250G802.11b/g Wireless Access Point(FG2255-50)
OVERVIEW
The NXA-WAP250G 802.11b/g Wireless Access Point provides
both high performance and increased security to support all
Modero wireless touch panels. In addition the NXA-WAP250G
provides convenient WLAN access for office/home computers
with connection speeds of up to 54Mbps. It is Wi-Fi certified
including enterprise-grade wireless encryption standards such
as WPA2, WPA, 802.1x, and 64-bit/128-bit WEP.
FEATURES
• Wireless encryption standards such as enterprise-grade
WPA2, WPA, 802.1x
• MAC address filtering and 64-bit/128-bit WEP encryption.
• Support for multiple VLANS (Virtual Local Area Networks),
separate, secure networks can be set up and operated
independently of each other through a single WAP.
• Increases deployment locations using three mode options -
Access Point Mode, AP/Repeater Mode, or Bridge Mode.
Use all three modes in the same network at the same time.
ONLINE www.amx.com/products/NXA-WAP250G.asp
SPECIFICATIONS
DIMENSIONS (HWD)
4 1/2” x 2 3/4” x 1” (11.5 cm x 7.1 cm x 2.6 cm)
WEIGHT
8 oz (230 g)
MAXIMUM CHANNELS
• FCC/IC: 1-11 • ETSI: 1-13 • MKK: 1-13
MAXIMUM CLIENTS
32 per VAP interface
DATA RATE
• 802.11g: 6, 9, 11, 12, 18, 24, 36, 48, 54 Mbps per channel• 802.11b: 1, 2, 5.5, 11 Mbps per channel
MODULATION TYPE
• 802.11g: CCK, BPSK, QPSK, OFDM• 802.11b: CCK, BPSK, QPSK
NETWORk CONFIGURATION
Infrastructure
OPERATING FREqUENCY
• 2.4 – 2.472 GHz (US, Canada, ETSI)• 2.4 – 2.484 GHz (Japan)
WIRELESS OUTPUT POWER
• 802.11b: 18 dBm (typical)• 802.11g: 17 dBm @ 6 Mbps, 14dBm @ 54 Mbps
WIRELESS RECEIVE SENSITIVITY
• 802.11b: -90 dBm @ 1 Mbps, -84 dBm @ 11 Mbps• 802.11g: -86 dBm @ 6 Mbps, -68 dBm @ 54 Mbps
AC POWER ADAPTER
• Input: 100-240 VAC, 50-60 Hz• Output: 5 VDC, 2 A
UNIT POWER SUPPLY
• DC Input: 5 VDC, 2 A maximum• Power Consumption: 6.5 W maximum
LED INDICATORS
• POWER (Power),• LAN (Ethernet Link/Activity),• WLAN (Wireless Link/Activity)
NETWORk MANAGEMENT
Web-browser
ENVIRONMENTAL
• Operating: 0 – 50 °C (32 to 122 °F)• Storage: -20 – 70 °C (-4 to 158 °F)• Humidity: 15% to 95% (non-condensing)
COMPLIANCES
• FCC Part 15B Class B • EN 55022 Class B • EN 55024 • EN61000-3-2 • EN61000-3-3
STANDARDS
• IEEE 802.3-2005 10BASE-T, 100BASE-TX• IEEE 802.11b, g• Wi-Fi 11b/g, WPA, WPA2, WMM
RADIO SIGNAL CERTIFICATION
• FCC Part 15C 15.247, 15.207 (2.4 GHz) • EN 300-328 • EN 301 489-1• EN 301 489-17 • ARIB STD-T66 • IC RSS-210
SAFETY
• EN 60950-1 • IEC 60950-1 (CB)
INCLUDED ACCESSORIES
• AC power adapter set (includes 4 plug snaps)• Category 5 (CAT5) network cable• NXA-WAP250G Installation Guide• WallMount/Surface mounting installation kit (including two screws)
TRAINING AVAILABLE
For impor tant ins ta l la t ion , conf igura t ion and programming techn iques ,
AMX Un ivers i ty t ra in ing is ava i lab le . Jus t v is i t www.amx.com/products/
NXA-WAP250G.asp and cl ick on the “Tra in ing” tab .
RECOMMENDED ACCESSORIES DESCRIPTION PART # ONLINE PAGE #
AC-DIN-WAP250G DIN Rail Mounting Bracket (FG532-03) www.amx.com/products/AC-DIN.asp 235
network/communication
2593000 RESEARCH DRIVE, R ICHARDSON, TX 75082 • 800.222.0193 • 469.624.7153 fax • TECHNICAL SUPPORT 800.932.6993© May 2009 AMX. All rights reserved. AMX does not assume responsibility for any errors or omissions.
A CLOSER LOOK
LAN LED
WLAN LED
POWER LED
nXa-waP250G network/communication
network/communication
260 US SALES AND SUPPORT 800.222.0193 • INTERNATIONAL SALES AND SUPPORT +1.469.624.7400 • www.amx.com© May 2009 AMX. All rights reserved. AMX does not assume responsibility for any errors or omissions.
NXA-WAP2403ACeiling Mount Omnidirectional Antenna(FG2255-20)
NXA-WAP2405ARack/Ceiling Mount Omnidirectional Antenna(FG2255-21)
OVERVIEW
The NXA-WAP2403A is a ceiling mount antenna designed for
above-ceiling applications that require frequency coverage from
2.4 GHz to 2.5 GHz. Designed primarily for corporate settings,
the NXA-WAP2303A gets the 2.4 GHz signal out of the closet
and into the conference room, training area and any other
meeting environment that requires wire-free control capabilities.
The ultra flat antenna mounts seamlessly above any ceiling tile,
so it delivers a wireless signal clear and strong within the desired
area. This setup also keeps the WAP on the rack, where it can be
easily monitored – there’s no need to climb into the ceiling.
The WAP is always within arm’s reach on the rack.
FEATURES
• 3 dBi antenna provides true omni-directional performance
• Three foot (0.915 m) UL910 Plenum cable can be installed in the
strictest indoor mounting locations (including air ducts)
• Dual 10-32 stud mount
• Utilizes UL94-V0 materials which provide the UL’s highest flame
retardant rating; These materials provide maximum placement
flexibility while meeting the most stringent building codes
NOTE: The NXA-WAP2403A is not compatible with the NXA-WAP250G
ONLINE www.amx.com/products/NXA-WAP2403A.asp
SPECIFICATIONS
DIMENSIONS (HWD)
5” x 10” x 1/16” (12.7 cm x 25.4 cm x .30 cm)
WEIGHT
8 oz (230 g)
FREqUENCY
2400-2500 MHz
INCLUDED ACCESSORIES
• 3 dBi Omni-directional antenna• Three foot (0.915 m) UL910 Plenum cable
OVERVIEW
The NXA-WAP2405A antenna provides residential and
commercial environments the ability to experience additional
wireless coverage area with the flexibility of placing the antenna in
the ceiling or on top of the equipment rack. In corporate meeting
rooms, the ceiling tiles allow for quick and easy installation. In the
home, where homeowners want the antenna out of sight, it can
be positioned on the top shelf of the rack. The NXA-WAP2405A
is designed to cover frequencies from 2400 to 2485 MHz with
a VSWR of less than 1.5:1. Its broad elevation plane radiation
pattern has been shaped to direct energy where it is needed,
while suppressing the misdirected upper and lower sidelobe
energy. The result is excellent coverage for a variety of
in-building applications.
FEATURES
• 5.5 dBi Omnidirectional Antenna
• An included 1/4-20 insert allows for easy installation onto
ceiling tile rails
• Optimized radiation pattern focuses energy where it is needed,
while at the same time, suppressing both upper and lower side
lobe energy
• UL Plenum rated RG58 coax cable and UL94-V0 radome meet
the strictest safety specifications
NOTE: The NXA-WAP2405A is not compatible with the NXA-WAP250G
ONLINE www.amx.com/products/NXA-WAP2405A.asp
SPECIFICATIONS
DIMENSIONS (HWD)
9 13/16” x 1” (24.9 cm x 2.54 cm)
WEIGHT
8 oz (230 g)
FREqUENCY
2400-2485 MHz
network/communication
2613000 RESEARCH DRIVE, R ICHARDSON, TX 75082 • 800.222.0193 • 469.624.7153 fax • TECHNICAL SUPPORT 800.932.6993© May 2009 AMX. All rights reserved. AMX does not assume responsibility for any errors or omissions.
NXA-WAP2410AOutdoor Enclosed Yagi Antenna(FG2255-23)
NXA-WAP2413AIndoor/Outdoor Directional Panel Antenna(FG2255-22)
OVERVIEW
The NXA-WAP2410A can be used to bridge antennas between
two networks or for point-to-point communications. It is field
adjustable for vertical or horizontal polarization with matched
principal plane beamwidths for optimum performance in either
orientations. This design also provides improved front-to-back ratio
and sidelobe suppression that reduces interference. All models
feature a robust mounting structure for consistent performance
regardless of weather conditions. The NXA-WAP2410A antenna
beams a wireless signal from a main residence to smaller structures
located on the property, where wireless control is desired. The
same concept applies for the corporate environment, where
remote locations on a campus may need wireless networking.
FEATURES
• 10 dBi directional antenna
• A 30 dB front-to-back ratio permits less physical separation on
the tower, thus adding mounting flexibility at installation sites
where space is limited
• Attractive weather-proof radome is constructed of UV resistant
material; This construction provides robust and trouble-free use
in harsh outdoor environments
• Field adjustability allows for both vertical or horizontal polarity;
Eliminates co-channel interference from neighboring radiators
• Includes a robust mast mount bracket which is designed to
withstand up to 125 mph winds
NOTE: The NXA-WAP2410A is not compatible with the NXA-WAP250G
ONLINE www.amx.com/products/NXA-WAP2410A.asp
SPECIFICATIONS
DIMENSIONS (HWD)
4 1/2” L x 3” OD (11.4 cm x 7.6 cm)
WEIGHT
1 lb (500 g)
FREqUENCY
2400-2485 MHz
OVERVIEW
The NXA-WAP2413A antenna is designed to extend the wireless
signal and data transmissions of 2.4 GHz transmission devices.
This boost in the WAP’s signal helps to meet the wireless
requirements in different applications and environmental settings.
It also provides wireless users extensive roaming access. The
NXA-WAP2413A is designed to cover 2.4 GHz frequencies,
obtaining maximum gain with an attractive, low profile package
and provides efficient and stable performance across the band.
Can be mounted indoors or outdoors.
FEATURES
• 13 dBi directional antenna
• Attractive, low profile housing; Permits the unit to be mounted
in either vertical or horizontal polarity
• Blends well with indoor and outdoor environments where
aesthetic considerations are important
• Corner exit RG58 pigtail design permits a wide variety of
connector options
• Utilizes UL94-V0 materials and PC board that provide the UL’s
highest flame retardant rating for maximum placement
flexibility; Meets most stringent building codes
NOTE: The NXA-WAP2413A is not compatible with the NXA-WAP250G
ONLINE www.amx.com/products/NXA-WAP2413A.asp
SPECIFICATIONS
DIMENSIONS (HWD)
8 13/16” x 8 1/16” x 1 5/8” (22.4 cm x 20.6 cm x 4 cm)
WEIGHT
19.2 oz (544 g)
FREqUENCY
2300-2500 MHz
INCLUDED ACCESSORIES
• 3 dBi Omni-directional antenna• Three foot (0.915 m) UL910 Plenum cable
network/communication
262 US SALES AND SUPPORT 800.222.0193 • INTERNATIONAL SALES AND SUPPORT +1.469.624.7400 • www.amx.com© May 2009 AMX. All rights reserved. AMX does not assume responsibility for any errors or omissions.
NXA-WAP10C10’ RG-58 Plenum Antenna Extension Cable(FG2255-26)
NXA-WAP2413ACMBCorner Mounting Bracket for the NXA-WAP2413A(FG2255-25)
NXA-WAP2413AMBMounting Bracket for the NXA-WAP2413A(FG2255-24)
OVERVIEW
The NXA-WAP10C is a 10’ RG-58 Plenum Antenna Extension
Cable that allows antennas to be extended away from the source
device.
ONLINE www.amx.com/products/NXA-WAP10C.asp
OVERVIEW
The NXA-WAP2413ACMB Corner Mounting Bracket allows the
NXA-WAP2413A antenna to be mounted to indoor corner.
ONLINE www.amx.com/products/NXA-WAP2413ACMB.asp
OVERVIEW
The NXA-WAP2413AMB Mounting Bracket provides reinforced
mounting for outdoor use of the NXA-WAP2413A antenna.
ONLINE www.amx.com/products/NXA-WAP2413AMB.asp
network/communication
2633000 RESEARCH DRIVE, R ICHARDSON, TX 75082 • 800.222.0193 • 469.624.7153 fax • TECHNICAL SUPPORT 800.932.6993© May 2009 AMX. All rights reserved. AMX does not assume responsibility for any errors or omissions.
NXR-ZGWNetLinx® ZigBee Gateway (FG5791-11)
RECOMMENDED ACCESSORIES DESCRIPTION PART # ONLINE PAGE #
NXR-ZRP NetLinx ZigBee Repeater (FG5791-02) www.amx.com/products/NXR-ZRP.asp 264 AC-DIN-ZIGBEE DIN Rail Mounting Bracket (FG532-05) www.amx.com/products/AC-DIN.asp 235
OVERVIEW
The NetLinx ZigBee Gateway is an Ethernet to ZigBee wireless
gateway that allows ZigBee devices to communicate with NetLinx
Integrated Controllers. The ZigBee Gateway features a 10BaseT,
half duplex Ethernet port capable of Power over Ethernet (PoE),
16 MB of Flash, 16 MB of SDRAM, and a ZigBee module, and is
controlled via a web server interface.
COMMON APPLICATION
Ideal for ZigBee devices to communicate with NetLinx Controllers
throughout residences or commercial buildings.
FEATURES
• Can coexist with 802.11 wireless networks without signal
interference
• Supports 16 wireless channels for interference tolerance
• Provides redundant paths of communication
• Configurable to include or exclude a ZigBee device on the
ZigBee network
• 802.3af PoE
ONLINE www.amx.com/products/NXR-ZGW.asp
SPECIFICATIONS
DIMENSIONS (HWD)
2 1/2” x 4 1/4” x 1” (63.5 mm x 108.5 mm x 25.0 mm)Note: depth does not include antenna
WEIGHT
5.6 oz. (158.75 g)
POWER
• 10.5 – 18 VDC; (13.5 VDC nominal operation voltage)• Power over Ethernet (PoE) Class 2
MEMORY
• 16MB of FLASH • 16MB of SDRAM
RADIO SPECIFICATIONS
• Frequency: 2.4GHz• Operating Channels: 11 – 26• Modulation Technique: DSS• Output Power: Region/country specific• Coverage Area: 165 feet (50.2m)
FIRMWARE/SOFTWARE SPECIFICATIONS
• Management: Built-in browser-based management with User Name/Password authentication
• IP Configuration: Static IP or DHCP client (default is static, 192.168.1.140)• Communications: ZigBee, TCP/IP
FRONT COMPONENTS
• LEDs - PWR/STATUS: A green LED that blinks to indicate the device is installed and
communicating properly. Power ON, but no master connection, is indicated with a solid light, Power OFF is indicated with no light.
- LAN: A green LED indicates an Ethernet connection is established. The LED blinks to indicate both sending and receiving information via Ethernet.
- RF: The LED is solid when end devices are connected; end devices not connected is indicated with no LED light; the LED blinks to indicate activity.
• Antenna Mount: A reverse SMA connection that supports a 2.4GHz antenna.• ID Button: When used in conjunction with NetLinx Studio, sets the device
and system numbers for the NXR-ZGW. Press and hold for approximately 30 seconds to return the NXR-ZGW to factory default settings.
REAR COMPONENTS
• Power connector : 2-pin 3.5mm captive-wire connector• Power Over Ethernet (PoE) - Powers the device through the CAT5 cable. Both
Power and Data can be transmitted simultaneous through the CAT5 cable when using the appropriate equipment.
• Ethernet Port: 10BaseT Modular (RJ-45) connector - connects the NXRZGW to your LAN and/or to connect your third party device to the LAN when the NXR-ZGW is used as a gateway.
ENVIRONMENTAL
• Operating Temperature: -30ºC (-22ºF) – 70ºC (158ºF)• Relative Humidity: 5% – 85% non-condensing; intended for indoor use only
CERTIFICATIONS
FCC ID: CWU-ZGW, IC ID: 5078A-ZGW, CE, IEC-60950, TELEC
INCLUDED ACCESSORIES
• Rubber feet• Velcro mounting strip• 2.4GHZ, MONO, RSMA, 3.5IN, 2.0DBI Antenna (70-0012-SA)• Power Supply (24-5791-SA)
TRAINING AVAILABLE
For impor tant ins ta l la t ion , conf igura t ion and programming techn iques ,
AMX Un ivers i ty t ra in ing is ava i lab le . Jus t v is i t www.amx.com/products/
NXR-ZGW.asp and cl ick on the “Tra in ing” tab .
network/communication
264 US SALES AND SUPPORT 800.222.0193 • INTERNATIONAL SALES AND SUPPORT +1.469.624.7400 • www.amx.com© May 2009 AMX. All rights reserved. AMX does not assume responsibility for any errors or omissions.
NXR-ZRPNetLinx® ZigBee Repeater(FG5791-02)
RECOMMENDED ACCESSORIES DESCRIPTION PART # ONLINE PAGE #
AC-DIN-ZIGBEE DIN Rail Mounting Bracket (FG532-05) www.amx.com/products/AC-DIN.asp 263
OVERVIEW
The NetLinx ZigBee Repeater can be added throughout
the installation to ensure a comprehensive, broad wireless
coverage area with no ”dead spots,” or where extra
coverage is needed.
COMMON APPLICATION
Ideal for increasing the wireless coverage area of ZigBee devices
throughout residences or commercial buildings.
FEATURES
• Can coexist with 802.11 wireless networks without signal
interference
• Supports 16 wireless channels for interference tolerance
• Provides redundant paths of communication
• Configurable to include or exclude a ZigBee device on the
ZigBee network
ONLINE www.amx.com/products/NXR-ZRP.asp
SPECIFICATIONS
DIMENSIONS (HWD)
1” x 2 1/2” x 3 1/2” (2.3 Cm x 6.4 Cm x 8.7 Cm)Note: depth does not include antenna
WEIGHT
4 oz (113.39 g)
POWER
10.5 – 18 VDC; (13.5 VDC nominal operation voltage)
MEMORY
• 16 MB of FLASH• 1 MB external memory
RADIO SPECIFICATIONS
• Frequency: 2.4GHz• Operating Channels: 11 – 26• Modulation Technique: DSS• Output Power: Region/country specific• Coverage Area: 165 feet (50.2m)
FIRMWARE/SOFTWARE SPECIFICATIONS
• IP Configuration: Static IP or DHCP client (default is static, 192.168.1.140)• Communications: ZigBee, TCP/IP, The NXR-ZRP communicates with a Netlinx
master via a NXR-ZGW.
FRONT COMPONENTS
• LEDs - PWR/STATUS: Power ON is indicated with a solid light. Power OFF is
indicated with no light. - RF: The LED is solid when end devices are connected; end devices not
connected is indicated with no LED light; the LED blinks to indicate activity. - ICSP: The LED is solid when ICSP connection is in place with the NetLinx
master.• Antenna Mount: A reverse SMA connection that supports a 2.4GHz antenna.• ID Button: Press and hold for approximately 10 seconds to return the NXR-ZRP
to factory default settings.
REAR COMPONENTS
• Power connector : 2-pin 3.5mm captive-wire connector• Power Over Ethernet (PoE) - Powers the device through the CAT5 cable. Both
Power and Data can be transmitted simultaneous through the CAT5 cable when using the appropriate equipment.
• Ethernet Port: 10BaseT Modular (RJ-45) connector - connects the NXRZGW to your LAN and/or to connect your third party deviceto the LAN when the NXR-ZGW is used as a gateway.
ENVIRONMENTAL
• Operating Temperature: -30ºC (-22ºF) – 70ºC (158ºF)• Relative Humidity: 5% – 85% non-condensing; intended for indoor use only
CERTIFICATIONS
IC ID: 5088A-ZRD, CE, IEC-60590, TELEC
INCLUDED ACCESSORIES
• Rubber feet• Velcro mounting strip• 2.4GHZ, MONO, RSMA, 3.5IN, 2.0DBI Antenna (70-0012-SA)• Power Supply (24-5791-SA)
AMX Mio Modero R-4 Remote Control
AMX NetLinx NI-2100 Integrated Controller(back view of controller)
AMX NetLinxZigbee Repeater
AMX NetLinx Zigbee Gateway
TRAINING AVAILABLE
For impor tant ins ta l la t ion , conf igura t ion and programming techn iques ,
AMX Un ivers i ty t ra in ing is ava i lab le . Jus t v is i t www.amx.com/products/
NXR-ZRP.asp and cl ick on the “Tra in ing” tab .
network/communication
2653000 RESEARCH DRIVE, R ICHARDSON, TX 75082 • 800.222.0193 • 469.624.7153 fax • TECHNICAL SUPPORT 800.932.6993© May 2009 AMX. All rights reserved. AMX does not assume responsibility for any errors or omissions.
CB-MET-ECOMRough-In Box for Metreau Entry Communicator(FG039-12)
OVERVIEW
Allows Metreau Entry Communicators to be mounted directly to
studs/pre-wall. Includes a wall box and mounting screws.
COMMON APPLICATION
Ideal for mounting in doorways, entryways or other locations
where visitors to a residence or commercial facililty would request
entry.
FEATURES
• Mounts directly to studs/pre-wall
• Includes wall box and mounting screws
ONLINE www.amx.com/products/CB-MET-ECOM.asp
SPECIFICATIONS
DIMENSIONS (HWD)
4 5/8” x 3 1/16” x 1 15/16” (11.7 cm x 7.8 cm x 4.6 cm)