an introduction to the program and the tools and general user interface
TRANSCRIPT
EXTRUSIONS, SKETCHINGAND CUTS
Introduction to the method by which
one creates objects of desired
specifications in Pro/E
EXTRUSIONS, SKETCHINGAND CUTS
Introduction to the method by which
one creates objects of desired
specifications in Pro/E
HOLES, ROUNDS AND CHAMFERS
I learned to command various ways to round an
edge and the tools used to do so.
HOLES, ROUNDS AND CHAMFERS
I learned to command various ways to round an
edge and the tools used to do so.
SHELLS, RIBS ANDDATUM PLANES
I learned to create shells and ribs. I also learned to properly, and
effectively employ datum planes.
SHELLS, RIBS ANDDATUM PLANES
I learned to create shells and ribs. I also learned to properly, and
effectively employ datum planes.
FEATURE MODIFICATIONAND MANIPULATION
I went back and edited various
specifications of previous projects.
FEATURE MODIFICATIONAND MANIPULATION
I went back and edited various
specifications of previous projects.
REVOLVES, PATTERNSAND COPIES
I learned three more tools: how to extrude in a circular
path (revolves), how to make hole patterns and how
to copy those patterns
REVOLVES, PATTERNSAND COPIES
I learned three more tools: how to extrude in a circular
path (revolves), how to make hole patterns and how
to copy those patterns
SWEEPS AND BLENDS
I used the sweep and blend
commands to extrude alone a
desired path and to create patterned
3-D objects.
SWEEPS AND BLENDS
I used the sweep and blend
commands to extrude alone a
desired path and to create patterned
3-D objects.
SWEEPS AND BLENDS
I used the sweep and blend
commands to extrude alone a
desired path and to create patterned
3-D objects.
SWEEPS AND BLENDS
I used the sweep and blend
commands to extrude alone a
desired path and to create patterned
3-D objects.
BASIC ASSEMBLY
I learned to assemble parts that
I had previously created. Also, I had
to create the bearings in the end
posts without a tutorial.
BASIC ASSEMBLYEXPLODED
I learned to assemble parts that
I had previously created. I had to
create the bearings in the end posts
without a tutorial. I also learned the exploded view
commands.
BASIC ASSEMBLY-DESKNON-EXPLODED
I furthered my expertise in the use
of assemblies, constraints, and exploded views.
BASIC ASSEMBLY-DESKIN USE
I furthered my expertise in the use
of assemblies, constraints, and exploded views.