anaicte approved premier engineering institute, affiliated to wbut
TRANSCRIPT
AnAICTE approved premier Engineering Institute, affiliated to WBUT & WBSCTE
Vision
•To impart technical education blended with advanced technology
•To foster awareness towards development through intellect & innovation
• To lead and inspire knowledge and perfection throughout the globe
Mission
•To develop tech professionals to fulfil industry needs
•To bridge the gap between demand and supply in a constructive society
•To utilize enormous human talents for the betterment of society
Objective
•To produce quality manpower for Research and Development
•To create ample employment opportunities for the students
•To transplant values and social responsibility among our students
Chairman’s Message
It is with immense pride and joy that I introduce to you the Global Institute of Management and Technology-Krishnagar, a cherished dream of mine for the last two decades. We intend to provide the best of the latest and the most-advanced technologies.
We shall dedicate all our efforts to facilitate our student’s paths to academic excellence and at the same time to develop their personality traits so that they can bring glory to themselves, their alma-mater and their country.
Let me assure you that our teaching faculties and staff members will impart their teaching expertise to each and every student to enable them to crack the competitive employment market scenario with panache. This would enable them to seamlessly move into their places-under-the-Sun in the technology-driven world of tomorrow.
Global Institute of Management and Technology, Krishnagar would imbue the students with, knowledge, applied internalization of the same, values and attitude so that they will not only be successful in their professional lives but will also accept the challenge of bringing the fruits of science and technology to the doorstep of the common man as the leaders in emerging technologies, both in India and Internationally.
I welcome you to GIMT to interact freely with all the faculty members in order to preview your learning experience. I am sure that the excellent state-of-the-art infrastructure and expert faculties will inspire you to stretch your limits and make winning a habit.
I thank you for choosing GIMT as your institute for engineering studies for the next four years and wish you all the best for the years to come. Mr. N. C. Das Chairman, GIMT
Principal’s Message
Dear Students/ Parents, Global Institute of Management & Technology is one of the leading institutes in the field of Engineering Education in India. The college has developed itself to offer high level of engineering/ technical education. This Institute has been founded in the year of 2009 to run Engineering Education such as Civil Engineering, Mechanical Engineering, Electrical Engineering, Electronics & Communication Engineering and Computer Science & Engineering. Recently, GIMT has started second Shift Diploma level course(s) for the academic year 2014-15 in relation with subjects like Civil Engineering and Mechanical Engineering. The learned professors in this Institute have published their research papers in National and International journals. This Institute is well collaborated with the different Industries in India. We strongly hope that GIMT will be the leader reorient in the economy of the country by strengthening rural based industries. The concept of Engineering has existed since ancient times human devised fundamental inventions such as the pulley, liver, wheel. Each of this invention is consistent with the modern definition of engineering, exploiting basic mechanical principles to develop useful tools and objects. Engineering, much like other science, is a broad discipline which is often broken down into several sub-disciplines. GIMT has new specialties, sometimes combined with traditional fields to create outstanding innovations. Dr. (Prof.) A.K. Majumder Principal, GIMT
Features @ GIMT
Sprawling large green campus of roughly 42,000 square meters
Best Academic and administrative blocks, workshops, laboratories, hostel etc.
Eminent faculty members and Ph.D holders from IITs, NITs and other renowned Institutes
State-of-the-art computer laboratories with more 250 high end computers
24X7 Internet connectivity with Wi Fi connection
One of the best laboratories with updated experimental setups
Excellent workshop facilities
Strategic collaboration with leading Industries for best placement and vocational training
Constant Research and Development (R&D) activities
National and International Conferences and seminars
Modern Language Lab for Grooming and Soft Skills training
Well-equipped digital library with a large stock of 28, 906 volumes and 1346 titles
Separate spacious study rooms for students and faculty members
Separate hostel for boys and girls with high quality of food
Separate canteen for faculty and staff members
Affiliation & Recognition
Affiliated to West Bengal University of Technology (WBUT) for B.Tech West Bengal State Council of Technical Education (WBSCTE) for Diploma Engineering Approved by All India Council of Technical Education (AICTE), New Delhi Recognized by Department of Higher Education, Government of West Bengal
Programmes offered B.Tech
Civil Engineering (120 Seats) Mechanical Engineering (60 Seats) Electrical Engineering (60 Seats) Electronics and Communication Engineering (60 Seats) Computer Science & Engineering (60 Seats)
Polytechnic (Diploma) Engineering Civil Engineering (60 Seats) Mechanical Engineering (60 Seats)
People behind the Academic Administration Ashok Kumar Majumdar Principal
Mr. Asis Chakraborty Registrar Dr. Nasrin Khan HOD, Applied Science &Humanities Dept. Dr. Abhijit Chakroborty HOD, Mechanical Engineering Dept. Mr. Subhasis Chatterjee HOD, Civil Engineering Dept. Miss Sagnika Bhattacharjee HOD, Electrical Engineering Dept. Mr. Sudip Mondal HOD, Electronics & Communication Engineering Dept. Mr. Sujit Biswas HOD, Computer Science & Engineering Dept.
Academic Advisory Committee
Prof. (Dr.) Asit Baran Chattapadhyay Ex-Prof. & Head of the Department, Mechanical Engineering, IIT-Kharagpur Prof. (Dr.) Shyamal Kr. Ghosh Ex-Prof. Department of Electrical Engineering
Jadavpur University Prof. (Dr.) S.P. Ghosh Ex-Director and Ex-Prof. Department of Civil Engineering NIT Durgapur
General Administration
Mr. Koushik Choudhuri Assistant Registrar Mrs. Sutapa Roy (Nandi) Senior Office Assistant Mrs. Ashima Chakraborty Office Assistant Mrs. Anindita Saha (Nandi) Office Assistant Mr. Sandip Dey Office Assistant
Library Mr. Niladri Ch. Das Librarian Mr. Asis Bhattacharya Asst. Librarian Miss. Chandrani Bhattacharya Asst. Librarian Mr. Subhendu Pramanick Sorter Mr. Indrajit Gupta Group D
Accounts Mr. Partha Chakrabarty Accountant Mr. Tridiv Nath Das Office Asst. (Accounts) Mr. Jayanta Biswas Office Asst. (Accounts)
Admission & Marketing Mrs. Gargee Singha Roy Deputy Marketing Officer Mr. Subhadip Debnath Relationship Officer Mr. Somnath Sarkar Relationship Officer Mr. Ratnadip Majumdar Relationship Officer Mr. Kaushik Biswas Relationship Officer
Hostel Administration
Dr. Nasreen Khan Hostel Superintendent (Girls) Mr. Shyamal Paladhi Hostel Warden
General Assistant Mr. Jyotirmoy Aich Mr. Ramananda Biswas Mr. Ranjan Das
Department Profile
ccccccccc
The word CIVIL- describe its whole entity in one word. A professional discipline that deals with the
design, construction, and maintenance of the physical and naturally built environment, including
works like roads, bridges, canals, dams, and buildings.
The division of Civil Engineering department has a very strong and qualified faculty force. The
department is dedicated to ensuring
rigorous adherence of all the norms laid
down by the University. The department has
the requisite laboratories for solid
mechanics, building design and drawing
where the students are ground in the
basics. All laboratories are equipped with
modern instruments for conducting the
experiments. Engineering programs are
supported by state-of-the-art laboratories that are open to all engineering students. These
laboratories and workshop are managed by qualified and dedicated staff. The department of Civil and
Environment engineering offers seven laboratory courses to cover the main topics in the fields of
concrete and pavement design, environmental design engineering, mechanics of materials, soil
mechanics, hydraulics, field surveying and engineering graphics. The lab equipment is continuously
upgraded and updated to ensure that our students are exposed to the most recent and advanced
systems.
ENVIRONMENTAL ENGINEERING LABORATORY
Civil
Engineering
The department also ensures highly accurate and
professional testing facilities such as spectrophotometer DO
measurement apparatus, total solids measurement, hardness and
alkalinity measurement of water,
soluble iron and chloride
determination. Most of the lab
facilities are connected to a data
acquisition system. In addition,
field equipment are available
for in-situ testing, such as soil investigation, groundwater and
surface water testing and concrete quality control.
Professional commercial testing as well as community services are also performed on a regular basis
in the above areas.
CONCRETE TESTING LABORATORY
Researchers in the Concrete Laboratory evaluate new test methods, conduct concrete materials
research, and develop of structural and concrete mix design and analysis procedures for concrete
pavements, and provide concrete forensics.
Tests Conducted
Tests on cement – specific gravity, fineness, soundness,
normal consistency, setting time, compressive strength of
cement mortar cubes.
Tests on fine aggregate – specific gravity, bulking, sieve
analysis, fineness
modules, moisture
content, bulk density and
presence of deleterious materials.
Tests on coarse aggregate - specific gravity, sieve analysis,
fineness modulus, bulk density.
Tests on Fresh Concrete: Workability: Slump, Vee-Bee,
Compaction factor tests.
Hardened Concrete: Compressive strength of Cubes, Split tensile strength, Static modulus of elasticity,
Flexure tests , Non destructive testing (Rebound hammer & Ultrasonic pulse velocity)
Mix Design of Concrete.-as per IS-10262-1982 & 2009
SOLID MECHANICS LABORATORY
Sophomore-level engineering mechanics course,
commonly labeled “Statics and Strength of
Materials” or “Solid Mechanics”. This course
introduces students to the fundamental
principles and methods of structural mechanics.
Topics covered include: static equilibrium, force
resultants, support conditions, analysis of
determinate planer structures (beams, trusses,
frames), stresses and strains in structural
elements, states of stress(shear, bending,
torsion), statically indeterminate systems,
displacements anddeformations, introduction to matrix methods, elastic stability and approximate
methods. Design exercises are used to encourage creative student initiative and systems thinking.
Tests Conducted
Tension test on Structural Materials: Mild Steel and Tor steel (HYSD bars)
Compression Test on Structural Materials: Timber, bricks and concrete cubes
Bending Test on Mild Steel
Torsion Test on Mild Steel Circular Bar
Hardness Tests on Ferrous and Non-Ferrous Metals: Rockwell Tests
Test on closely coiled helical spring
Impact Test: Izod and Charpy
Demonstration of Fatigue Test
SURVEY CAMP
A 10 day long survey camp conducted by department at
college premises, using a lot of items of modern day
survey equipments (Total station, Theodelite, Auto level,
Dumpy Level, Plane Table survey set up etc.). The survey
lab of Civil Dept. is quite capable of doing the different
type of field survey works like theodolite survey, plane
table survey, chain survey, compass survey, traverse
servey, leveling and contouring, that can help the
students to be accustomed with the principle of
Surveying & its practice.
GEOTECHNICAL AND SOIL MECHANICS LABORATORY
This lab consist of lot of apparatus for conducting different test on the different engineering
properties of soil such as
atterberg limits, shear strength,
Permeability, Compaction,
Consolidation etc. All this test
are conducted in two semester
in second & third year.
TRANSPORTATION ENGINEERING LABORATORY
Transportation engineering section of the civil engineering department is involved with multifarious
activities related to highway engineering in particular and transportation engineering in general. Apart
from teaching and research it offers consultancy and testing
services in the following areas:
Transportation Planning
Traffic engineering control
GIS based planning and management of
Transportation System
Pavement Evaluation and highway material testing.
Test Conducted
Tests on highway materials–Aggregates- Impact value, Los-Angeles Abrasion value water absorption,
Elongation & Flakiness Index.
Test on Bitumen & bituminous materials: Specific gravity, penetration value, softening point, loss on
heating, Flash & Fire point test.
Stripping value test
Design of B.C. & S.D.B.C. Mix
CBR Test ,Marshal Stability Test ,Benkelman beam Test.
FLUID MECHANICS LABORATORY
Fluid mechanics is the branch of physics that studies fluids (liquids, gas and plasmas) and the forces
acting on them. Fluid mechanics can be divided into fluid statics, the study of fluid at rest; fluid
kinematics, the study of fluids in motion; and fluid dynamics, the study of the effect of forces on fluid
motion. It is a branch of continum mechanics, a subject which models matter without using the
formation that it is made out of atoms, that is, it models matter from a macroscopic view point rather
than from a microscopic view point. Fluid mechanics, especially fluid dynamics, is an active field of
research with many unsolved or partly solved problems. Fluid mechanics can be mathematically
complex, best solved by numerical methods, typically using computers. A modern discipline called
computational fluid dynamics (CFD) is devoted to this approach in solving fluid mechanics problems.
Particle image velocimetry, an experimental method for visualizing and analyzing fluid flow, also takes
advantage of the highly visual nature of fluid flow.
Test Conducted
Calibration of orifice meter-to calculate coefficient of discharge through orifice meter
Calibration of V-notch- to calculate coefficient of discharge through V-notch
Efficiency of centrifugal pump
Determination of orifice co-efficient
SOFTWARE SKILL LABORATORY
Keeping in pace with modern trend of Design sector, the
STAAD Pro (Vi8) laboratory has been developed for
exposure to the software added analysis. Auto CAD ( 12 ) is
also used for design and project related drawing.
Laboratory is well equipped and has adequate numbers of
terminal for all students.
FACULTY & STUFF
Global Institute of Management & Technology, Krishnagar has world class laboratory facilities with
ISO-certified equipment which make the learning process thoroughly meaningful and productive.
Highly qualified faculties and technical staffs create real life scenarios to enhance practical knowledge
of the students.
Dr. S.P.Ghosh Professor PhD
Mr. Subhasis Chatterjee HOD ,Asst. Professor BCE (HONS), M.E,
Pursuing PhD.
Ms. Sunipa Roy Asst. Professor B. Tech, M.E.
Mr. Sourajit Das Asst. Professor B. Tech, M.Tech
Mr. Mainak Ghosal Asst. Professor B.Tech, M.E, MBA, PGDHRM
Ms. Banhita Pal Asst. Professor B. Tech, M.E.
Mr. Surajit Biswas Asst. Professor B.Tech, M.Tech
Mr. Anuran Bhattachariya Asst. Professor B.Tech, M.Tech
Mr. Subhayan Bhaumik Asst. Professor B.Tech, M.E.
Md. Momit-ar Rashid Pro-Term Lecturer BE
Mr. Pradip Sarkar Technical Assistant Diploma in Civil
Mr. Tapas Kumar Debnath Technical Assistant Diploma in Civil
Mr. Nirmalya Bhattacharya Technical Assistant Diploma in Civil
Mr. Purnendu Das Technical Assistant NCVT, Appearing DCE
Mechanical engineering is one of the oldest branches of engineering.
It is also referred to as the mother branch of engineering. Another appealing feature of Mechanical
engineering is that the application base of this field of study is extremely broad and diverse. Almost all
inventions during the ancient period and a vast majority in the modern area are direct contributions
of one or the other application of mechanics. Traditionally, mechanical engineers have to deal with
concepts such as mechanics, thermodynamics, robotics, kinematics, structural analysis, fluid
mechanics and many others. Using a combined approach of theoretical analysis, numerical
calculations and experimental investigations, the department aims to develop new or advanced
knowledge for application in industrial design. Priority is given to the efficient use of energy and the
minimization of environmental pollution.
Thermal Engineering Lab: The Thermal Engineering Laboratory is Equipped with several rigs and test
facilities for doing research within thermal process for energy conversion. Thermal engineering is a
branch of science that covers energy conversion from one form to another, working of IC engines,
modes of heat transfer, principles of refrigeration and air conditioning etc.
Manufracturing Lab
MECHANICAL
ENGINEERING
Workshop
The field of thermal engineering includes a lot of applications that can be classified as the
combination of thermodynamics and heat transfer, Such as IC engine, air conditioning and
refrigeration system. The objective of this laboratory is to provide the student a good environment to
understand some very important concepts and applications in the field of IC engines and refrigeration.
These concepts are necessary to understand how the typical thermal devices work (Refrigerators, air
conditioning devices, car engines or steam engines).
Surface Grinding Machine
Dynamics of Machine lab: Dynamics of Machine lab is often described as one of the most important
lab in Mechanical Engineering department. This laboratory have been specifically designed and
equipped with most modern instrument to facilitates academic learning, research and development.
The major equipments in this lab are Universal Governors apparatus, Cam apparatus, Gyroscope,
Balancing of rotating Masses etc.
Bench Grinding Machine
Applied Mechanics Laboratory: It is an important laboratory of Mechanical Engineering department.
Various machines for testing of materials are there. We can check hardness by Rockwell Hardness and
Brinell hardness tester of the metal specimen. Student can learn to measure toughness of metal
specimen by impact testing machine (Izod and Charpy test).Stiffness (Under tension and compression)
of helical spring, Torsion test. There is one important machine viz Universal testing machine for
measuring yield stress, ultimate tensile stress, elongation percent, and Bend test and re bend test of
metallic bar and structural products. The learning of this laboratory is of great help in professional life
of Mechanical Engineers.
Surface Grinding Machine
Workshop Technology: Workshop is a place where products are manufactured. It may involve
operations or trades like bench work & fitting, smithy, forging, sheet metal, Wood working, pattern
making, foundry, welding etc. Workshop is the backbone of any industrialization. Work shop and
technical staff in industry must know the various Workshop processes, material being processed, tools
and equipments for manufacturing different components or products with optimal process plain using
proper precaution and specified safety to avoid accidents.
ARC Welding Operation
Fluid Mechanics and Hydraulic Laboratory: This laboratory is very important for M.E. department.
Here all the equipments are running well to conduct all types of experiment not only for laboratory
works but also for project works. This include Venturimeter & Orifice meter combined are used to
Show how cd is measured, pitot tube to show how cv of a flow is measured, V-notch and Rectangular
notch apparatus to measure cd for notch, Centrifugal pump test rig used to check.
Fluid Mechanics and Hydraulic Laboratory
Mechanical Engineering Department: Mechanical EngineeringDepartment is one of the main
stream of GIMT, right form the inception of the college. The Department currently runs one
undergraduate program-B.Tech (Mechanical Engineering). Ever since its inception, Mechanical has
been one of the most sought after branch of the institute. Objective of the undergraduate
program is to prepare the Mechanical Engineers that are globally the best. Most of the students,
who have graduated from the department, will end up taking leading positions in Industry,
academia and government, both within India and abroad. In addition to classroom interaction
students of Mechanical Engineering need a lot of practical training in the Laboratories, Workshop,
Drawing office and Computer Aided Drawing and Design. To help students to learn their practical
aspects, following state of the art laboratories conforming to the WBUT syllabus have been
established.
Machining Operation
Classroom
Faculty & Staffs:
Dr. A.B.Chattapaddhyay Professor Emeritus Ph.D(Engg)
Mr. Sujit Majumdar Dean M.Tech, Ph.D (pursuing)
Dr. Abhijit Chakraborty Associate Prof. & HOD Ph.D (Engg)
Mr. Tarun Kr. Chatterjee Asst. Professor M.Tech
Mr. Ashok Kr. Das Asst. Professor M.Tech
Mr. Sovan Patra Asst. Professor M.Tech
Mr. Siddharta Bandopadhyay Asst. Professor M.Tech
Mr. Rajarshi Basu Asst. Professor M.Tech
Sk. Hikmat Asst. Professor M.Tech (Pursuing)
Ms. Riya Pawani Visiting Faculty B.Tech, MBA
Mr. Indrajit Bhattacharjee Tech. Assistant B.Tech
Mr. Nitesh Kundu Tech. Assistant Diploma
Mr. Samar Kr. Bhowmick Tech. Assistant Diploma, AMIE(Pursuing)
Mr. Nabankur Mandal Tech. Assistant B.Tech
Mr. Manob Prodhan Tech. Assistant ITI
DEPARTMENT OF ELECTRICAL ENGINEERING
Welcome to the Department of Electrical Engineering at Global Institute of Management & Technology. The department offers a vibrant environment for graduate education in Electrical Engineering to provide the leadership to facilitate excellence in
its field of Engineering. The department is dedicated to advancement of the frontiers of knowledge to provide the students with a inspiring and rewarding learning experience. The infrastructure and lab facilities are upgraded from time to time and provide adequate opportunities for student.
We think it is truly significant to work in a Department that has excellent links with
industry where you can observe the direction of the work you are doing and the path
between your degree and your career.
Why Electrical Engineering……..????
Change the world with revolutionary technology. Improve people’s lives around the world. Solve the planet’s energy needs! A degree programme that is industrially relevant. A programme with scholarships to help with the finances. A well-paid and rewarding job when you graduate.
Electrical engineering can make a student specialize in Electrical Machines, Power
System, Control System, Power Electronics and Drives etc. Our department provides
the following well equipped laboratories.
Basic Electrical Engineering Laboratory
Electric Circuit Theory Laboratory
Electrical Machine Laboratory
Electrical Measurement Laboratory
Power System Laboratory
Control System Laboratory
Power Electronics Laboratory
Electrical Drives Laboratory
Basic Electrical Engineering Laboratory:
The laboratory starts with the familiarization and study of different
meters and instruments including rectifier type instruments and also
their calibration techniques. Kits for verification of networks theorem
like Norton’s, Thevenin’s, Superposition, Maximum power Transfer
characteristics of Carbon and Tungsten lamps and comparison of
positive and negative temperature co-efficient are available in the
laboratory.
This laboratory also consists of set-ups for performing the experiments
like Fluorescent lamp characteristics, open and short circuit test of
single phase transformer, no-load characteristics of dc generator,
starting & reversing and speed control of dc motor, RLC series and
parallel circuit behavior and etc.
Electric Circuit Theory Laboratory:
Two different sections are present in this
laboratory, software and hardware section. A
number of computers are available, to perform
the software based experiments like,
generation of different type of signals,
simulations for verification of different
network theorems, Fourier analysis, Laplace
transform and inverse using MATLAB and
PSPICE software etc.
The experiments on two port network,
Different filters, transient analysis of RL, RC
& RLC circuits etc are done by the different
hardware kit.
Electrical Machine Laboratory:
Cut out models of almost all sort of
machines including Reluctance motor,
Stepper Motor and Servo Motor are
displayed in this laboratory. It possesses
synchronization set-up of alternators, a
set-up each of Induction Generator, DC
shunt motor with speed control unit, DC
shunt generator with load testing
arrangements, a transformer section with
three phase transformer with the
provisions of different connections e.g.
star-delta, delta-delta, star-star, zigzag etc.
along with single phase transformer,
single phase Induction Motor with loading
arrangements etc. three phase squirrel
cage Induction Motor with DOL, star-
delta and auto transfer starter, slip ring
motor with electrical loading set-ups are
also there in the laboratory.
Three phase induction motor with variable
frequency controller, motor alternator sets,
speed control of squirrel cage induction
motor with pole changing arrangement
and special experimental set-up for six
coil alternator connections have also been
installed.
Electrical Measurement
Laboratory:
Students are able to be familiar with
different types of measuring instruments
and they are able to know how to measure
different types of quantity and parameters
by those instruments and different type of
meters in this laboratory. De sauty and
Schering bridge present here to measure the
capacitance. To measure unknown
inductance Anderson bridge, for
measurement of resistance Kelvin Double
bridge and for frequency measurement
Wien bridge is available in this laboratory.
This laboratory also consists of
Galvanometer, Potentiometer, Energy
meter, CRO and many other important
instruments and meters (PMMC, MI,
Dynamometer, Rectifier type etc).
Power System Laboratory:
All the set-ups according to the syllabus of Power
system I and Power system II are available in this
laboratory. Among all the set-ups some of them
are determination of A, B, C, D parameters for a
long transmission line, dielectric strength of
insulating oil, determination of break down
strength of solid insulating material, measurement
of earth resistance by earth tester, study of
different types of insulator, polarity and ratio test
of CT & PT, different motor protection schemes,
study the different types of relay like under
voltage relay, earth fault relay, over current relay
etc.
Control System Laboratory:
This is mainly a software based laboratory. Also
some hardware trainer kit is available to find out
settling time, % peak overshoot, time constant etc
of step response for 1st order and 2nd order system
with unity feedback. In the software section all
the computers have MATLAB and PSPICE
software. Bode plot, Nyquist plot, root locus are
done by the MATLAB software. The experiments
on PI, PD, PID controller type1, type 0,type 2
system etc are performed by MATLAB
simulation.
Power Electronics Laboratory:
This laboratory is also having two separate
sections. The software section consists of
number of computers. Basically the
simulations on Cycloconverter, Dual
converter, step up & step down chopper,
PWM inverters any other converters with R
& RL load are done here. In hardware section
trainer kit are available to perform the
experiments on SCR, TRIAC characteristics,
triggering of SCR, different type of half and
full controlled rectifiers etc.
Electrical Drives Laboratory:
This laboratory is an application based
laboratory with arrangements for industry
protocols. It is designed with the provisions
of practical devices as well as software
simulation simultaneously, viz; V/F induction
motor drive, single phase (AC) motor speed
control using TRIAC, Regenerative and
dynamic braking operation for AC and DC
drive, Chopper fed DC drive, PWM inverter
fed 3-phase Induction Motor control and VSI
/ CSI fed Induction motor drive analysis
using software etc. For software simulation,
the laboratory offers MATLAB and P-
SPICE.
The Department of Electrical Engineering of GIMT has an excellent team of
experienced, qualified faculty and non-teaching staff. Over the past four years the
faculties of the department have published numerous papers in various
Journals/Conference Proceedings. With the available resources the department makes
them disciplined, competent and motivated Engineers.
Dr. Shyamal Ghosh
Professor Ph.D.
Ms. Sagnika Bhattacharjee
Asst. Professor M.Tech
Mr. Chandra Mohan Khan
Asst. Professor M.Tech
Mr. Pratyush Das
Asst. Professor M.E.
Mr. Tamal Dutta
Asst. Professor M.Tech
Mr. Arindam Pal
Asst. Professor M.Tech
Mr. Debjit Kundu
B.Tech Technical Assistant
Mr. Bikas Kumar Paul
B.Tech Technical Assistant
Mr. Soumajit Barman B.Tech Technical Assistant
Faculty & Staffs
ECE Dept.
DEPARTMENT OF ELECTRONICS & COMMUNICATION ENGINEERING
Since the establishment of the GIMT, the Electronics and Communication Engineering
Department has been consistently working towards the goal of creating a good lab based teaching
environment to produce skilled students & professionals in their relevant subject and motivating
them towards higher studies & research program. The Department has revamped and replenished its
curriculum and course structure to keep pace with the present day needs of the Electronics associated
with the industries and research in the country at large.
The Department is basically centered on five different Technical Laboratories which play the
role of nuclei. Keeping in line with fast changing technology, the Department has well designed class
rooms, and well equipped advanced laboratories in an independent block. The following are the
laboratories in Dept of Electronics & Communication Engineering.
Laboratories:
Basic & Analog Electronics Laboratory Communication Engineering Laboratory Digital & Microprocessor Laboratory Design & Simulation Laboratory EM Wave & Microwave Laboratory
Laboratory Details, ECE Dept.
Basic & Analog Electronics Laboratory This lab consist of Basic Electronics & Analog Electronics Lab where students can get introductory laboratory knowledge & overviews about different basic electronics instruments and can perform
over 30 different experiments using Trainer Kit and also using Bread Board & circuit components like Resistor, Capacitor, Diode, Transformer, Transistor, JFET, MOSFET, OPAMP, Timer-555, Logic Gates, CRO, DSO, Multimeters , Function Generators & Power Supply for measuring & testing.
Communication Engineering Laboratory In this lab, Analog Communication, Digital Communication & Advanced Communication labs are conducted. In Analog Communication Lab students can understand several Analog Systems like Radio, T.V., AM, FM, TDMA & FDMA using different trainer kits. Digital Communication Lab provides exposure on PCM, PAM, PPM, PWM, DM, ADM, ASK, FSK, PSK, CDMA, PN Code, Spread Spectrum, and Line Coding Techniques. Advanced Communication Lab is equipped with trainer of Bluetooth, Wireless LAN and Optical Fiber trainer. Sufficient no of Spectrum Analyzer & DSO are accessible for observing spectrum in Time and frequency domain more accurately.
Digital & Microprocessor Laboratory This Lab relates the students to the digital world of modern era where Microprocessor & Microcontroller Lab and Digital Electronics Lab are carried out simultaneously. Different Logic like Gates, Adder, subtractor, Multiplexer, Encoder, A2D & D2A converter, Flip Flop, Register, Counter BCD encoder can be performed using advanced different trainer kits as well as by connecting ICs on bread Board. Moreover students can implement several real life problem based Digital Logic, project using Microprocessor-8085 & 8086, Microcontroller-8051 and their peripherals like 8255-I,8255-II, 8253,8259 etc.
Design & Simulation Laboratory The heart of the ECE lab is this Design & Simulation Lab where students are always involved in developing different electronics projects & circuits using hundreds of different electronics components & advanced instruments which are already available. The laboratory equipped with adequate number of Project Development Boards, Soldering Rod for PCB conations, Chip Burner and Tester and Different ICs. Digital Signal Processing, Signal & System, Solid State Device, Circuit Design & VLSI lab are performed alternatively where students can design and simulate different problem using different installed software in PC like MATLAB, PSPICE, CIRCUIT MAKER, LASI, XILINX, and TANNER SPICE. Highly sophisticated hardware like DSP processors, FPGA, CPLD, XPO stepper motor and ARM LPC are also available for digital system implementation to latest trends IC and Chip design.
EM Wave & Microwave Laboratory EM Theory & Transmission Line Lab and Microwave Lab are scheduled in this highly advanced equipped lab where students gain the knowledge about the basic operation and radiation pattern by different antennas like Horn, Dipole, Monopole, Yagi-Uda & Parabolic Antenna. TDR trainer is available for the measurement of VSWR, Reflection Coefficient and Length & Fault of the coaxial Cable at different Load type. Full set up of Reflex Klystron Bench, Gunn Diode Bench, Dielectric Slab, Magic Tee, Attenuator, Circulator Frequency Meter, Power Meter and VSWR meter in X Band range are there to perform various experiment on Microwave.
Others activities
The other important features of the department are: organizing workshop (Two Days National
Level Workshop on Robotics - 2014 in association with Magniva Technology & IIT Kharagpur) &
conference, individual counseling of students for academic improvement, theme based mini projects
at lower semesters, lab based teaching & learning techniques and guiding them for GATE exams.
Faculty& Staffs
The department has well qualified & experienced faculties & staffs who aim at educating and training
students with sound knowledge and awareness in the latest trends in Electronics and Communication
Engineering. The energetic and efficient faculties from different field have succeeded in keeping a
lively atmosphere among the students with innovative teaching techniques and real life problem
based project and researches. The teaching is closely coupled with the research activities in diverse
aspects like Wireless Network, Communication, Optical Fiber, Mechatronics, Soft Computing and Bio-
Informatics. In the academic year 2013-14, approx. 12 National & International Research Papers have
been published so far by the faculties of ECE dept.
Mr. Sudip Mandal H.O.D. M.Tech (ECE), Ph.D. (pursuing)
Mr. Dipankar Saha Assistant Professor M.Tech (Networking)
Mr. Nilanjan Mukhopadhyay Assistant professor M.Tech (Optoelectronics)
Mr. Pijush Dutta Assistant professor M.Tech (Mechatronics)
Mrs. Saswati De Assistant professor M.Tech (ECE)
Mr. Rajkumar Samanta Technical Assistant B.Tech (ECE)
CSE Dept
DEPARTMENT OF COMPUTER SCIENCE AND ENGINEERING (C.S.E.):
The Department of Computer Science & Engineering began its journey with the inception of the
College. The department is equipped with more than 250 nos of computers connected with LAN and
TCP/IP addresses. The department has-
6 MBPS Leased line internet connectivity (Vodafone).
2 MBPS Broadband internet connection (BSNL).
The students are exposed to a working environment with high end servers. CISCO routers and
operating system viz, Windows XP, Windows 7, Linux, Redhat ES 3.0 and application software viz,
Borland, Turbo C, C++ Suit, Visual Studio++ compiler, Net Programming, Auto CAD, Oracle, Studio 8,
Photoshop etc.. In the Central Computer Centre there are 60 nos of computers for the use of 1st year
students for regular practice.
T he students are exposed to :
Domain Knowledge.
Technological Skills.
Communication Skills.
The following are the laboratory set-ups in the Department of Computer Science & Engineering:
Central Computing Laboratory.
Operating System Laboratory.
Database Management System Laboratory.
Computer Architecture Laboratory.
Graphics and Multimedia Laboratory.
Central Computing Laboratory: Computing Laboratory is one of key foundation laboratories where the basic computation and its application areas are focused. There are more than 60 computers connected in LAN in the well furnished basic computing laboratory. The computers are preloaded with Windows XP, 7 operating system and Turbo C compiler. The main objective of this laboratory is to provide C and Data Structure programming and programming with Numerical analysis facilities. Some machines are providing with ANSI-C compiler under Linux platform.
Operating system Laboratory:
In the operating system laboratory all important type of OSs are available like Windows 98 , Windows-7 , Windows-XP & Professional , Red Hat Linux etc. and the student acquire knowledge on any kind of above mentioned OS. Special types of programming like system programming like kernel-level programming, shell programming and client-server programming using sockets are carried out in the laboratory. Different types of server installation and configuration like DNS, DHCP, NFS, IIS, RAS etc
are available. Web related operations like Apache Server management, IS server management are some of the special features of this laboratory.
Database Management System (DBMS) Laboratory:
DBMS laboratory runs oracle 10G under Enterprise, Windows 7 platform with more than 35 computers, all connected by Ethernet 10/100 MBPS links and a part of GIMT campus LAN. Web-based Online Examination System, Accounting System, Students Fees Collection System, Examination Research Maintaining System are in the process of being operationalize. Distributed Database Management oriented programming as per WBUT syllabus is also done by the students in this laboratory.
Computer Architecture Laboratory:
Various type of digital circuits related to computer architecture are experimented on with necessary inputs. The laboratory is equipped with different types of ICs, Bread Boards, Signal Generators and Oscilloscopes etc,; experiments including design and implementation of different types of circuits like 7 segments display, Adder, ALU design etc. are carried out in the laboratory. Faculty & Staff
Computer Science & Engineering Department:
GIMT established the department of Computer Science & Engineering in the academic year 2010 –
2011 with state-of -art laboratories infrastructure and blend of highly qualified and experienced
faculty members with good industrial and IT exposure to nourish the budding engineers to generate
highly skilled manpower both for IT industry and research in cutting-edge technologies.
Mr. Sujit Biswas Asst. Professor & HOD M.Tech
Mr. Fakruddin Ali Ahmed Asst. Professor M.E.
Mr. Sukanta Singh Asst. Professor M.Tech
Mr. Rajib Dutta Asst. Professor M.Tech
Mrs. Rakhi Chakraborty Asst. Professor M.Tech
Mr. Prodip Deb LAB Assistant MCA
Department of Applied Science & Humanities (AS&H)
Engineering mathematics
Mathematics is undoubtedly the mother of all sciences. No inventions till date have taken place
without the help of mathematics. Engineering without mathematics is just like a ship without a
rudder. We are proud to be teachers of Engineering Mathematics in “Global Institute of Management
and Technology”.
Mathematics department consists of highly experienced and student friendly faculties. The objective
of GIMT is to try to create interest among the students so that they develop liking for the subject.
Apart from the scheduled classes, we also have the facility of
tutorial classes in the weekend where we try to clear any
doubts of the students. Besides this, students are always
welcome to consult their respected teachers regarding any
problems.
As per the WBUT syllabus 1st, 2nd, 3rd and 4th semesters have
engineering mathematics and in higher semester, engineering
mathematics is there as an elective subject. Students under this
department are given assignments throughout the year for
their continuous evaluation. Surprise tests are also conducted
every month to assess the students’ performance better.
Engineering Physics Laboratory
Enables experiments on thermal physics (thermal conductivity, determination of good and bad
conductor), on thermoelectric effect (using a thermo couple), on general properties of matter,
(coefficient of viscosity of a liquid, characterization of materials by determining their rigidity and
young’s module etc) and some very important optical phenomena like interference, diffraction and
dispersion are encountered through dark room experiments involving optical bench carrying Baptism,
Newton’s ring setup, laser source along with diffraction grating and prig in-spectrometer.
Experiments on electromagnetic effects include ballistic galvanometer set-up and Thomsor method
(e/m) determination. Important fundamental constants of
physics like Redbug constant (based on atomic transition),
Stefan’s Constant (based on black-body radiation, Plank’s
constant (based on Einstein’s photoelectric effect) can also be
studied.
Some additional equipment using semiconductor for band gap
determination and Hall co-efficient determination, Lande’g
factor determination set-up, Frank-Hertz experimental setup
fiber optic communication set up and de-electric constant
determination set up are also used to the students for
experimental verification.
Engineering Physics
The division of physics is well equipped with highly qualified
experienced and senior faculty members. The students have to attend both theory and practical
classes as per norms of the WBUT. The practical classes are taken in small groups and the students are
so trained that they can work on their experiment by themselves. The entire practical syllabus is
completed well in advance so that the students have sufficient time at
their disposal for revision. All sorts of assignments and questions are
solved in theory classes regularly. Students can also meet the faculty
members for discussing their academic problems. The laboratory is well
equipped with all kinds of experimental arrangements such as
Lande’g factor apparatus, Half-Coeff apparatus, Stefan’s constant
apparatus, and optical arrangements etc. as prescribed by WBUT.
Short term unit tests and additional viva-voce tests are conducted
regularly both in theory and practical experiments to enhance the
understanding of the students. The University results are highly
satisfactory. Every student can have benefit to sufficient member of text
book of renowned authors and journals.
Engineering Chemistry
The division of engineering chemistry with a team of highly qualified and experienced lab assistants,
text books and journals in good numbers are available to each and every student.
Students have to attend both theory and practical
classes as per the prescribed syllabus of WBUT.
Students can consult their academic problems
individually with the faculty members. For practical
classes sufficient apparatus, reagents and scientifically
designed large space are available for each student in
the laboratory. The laboratory is arranged according to
the state-of-the-art technology. Class tests, unit tests
and viva voce examinations are held at regular intervals
to benchmarks the students and aid them in further
improvement.
Engineering Chemistry Laboratory
Practical knowledge is essential for not only to grow interest for the subject concern but also it helps
the students to have a complete idea about the subject. Keeping this into consideration WBUT has
introduced Engineering Chemistry Laboratory in their curriculum. With same view GIMT has
established a well equipped Engineering Chemistry Laboratory for 1st year B.Tech students. In this
laboratory the student acquire knowledge of fundamental wet chemistry practical and some other
instrumental analysis which helps them to grow their interest in the project of engineering chemistry
and at the same time this knowledge helps them a lot in their future professional life.
As per WBUT syllabus 1st year B.Tech students have 10 experiments in their Engineering Chemistry
Practical curriculum and according to the guideline mentioned in the syllabus students have to
complete minimum 6 experiments. The laboratory is well equipped with a separate balance room for
weighing purpose; apart from the arrangement for normal wet chemical analysis, all the instruments
like pH meter, conductivity meter, Ostwald viscometer etc. are available in the Chemistry laboratory
to help the students to conduct all the instrumental analysis given in the syllabus. At the end we
would like to convey that, we are proud to state that we have established a setup to conduct all the
10 experiments given in the WBUT syllabus and we are not allowing our students to complete less
than 8 experiments in their practical session.
The different types of titrations done in this laboratory are:
Acid base titration for estimation of commercial caustic soda.
Redox titration for estimation of iron using permanganometry.
Complexometric titration for estimation of hardness of water using EDTA solution.
Conductometric titration for estimation of strength of HCl solution.
pH metric titration for estimation of the strength of HCl solution.
Determination of amount of
chloride ion by
Argentometrically.
Determination of alkalinity of
water.
Two important physical properties of
the solutions:
1. Viscosity by using Ostwald
viscometer and
2. The partition coefficient of one
solute in two immiscible
solvents is determined in this laboratory.
English Language Laboratory:
Good communication skills are indispensable for the success of any professional. Communication in
the English language, in particular, has become essential in the lives of young people who aspire to
advance their careers anywhere in the world. But language learning is not the same as learning any
other subject. It is not confined to writing an examination and getting a degree or award. The four
skills of reading, writing, listening and speaking have to be practiced and thereby acquired. Being able
to communicate well is the most important factor while seeking a placement in a company or
Institution. GIMT always keeps this fact in mind and that’s why GIMT has taken good care of having a
well-equipped English Language Laboratory to enhance the students’ communication skill and soft
skills to make them industry-ready. The English Language Laboratory plays the most important role in
this language learning process.
It is required of any learner to have a good command of the language for communication purposes,
with clarity and accuracy being vital for effective and efficient communication. What helps one to
acquire such proficiency in a language is listening to the language minutely. So, first of all, we take
special care of building the students’ habit of listening to English language which is so different from
their mother tongue and the surrounding atmosphere. We have 31 computers with Headphones. We
play English speaking tracks and let the students listen to them.
The language laboratory is very useful for assessing students' speech. Our English Language
Laboratory provides students with the technical tools to get the best samples of pronunciation of the
language. The electronic devices such as different audio-visual aids used in the laboratory will
stimulate the eyes and ears of the learner to acquire the language quickly and easily.
We also provide the students with enough scope of reading easy English texts, so that they may build
up their English vocabulary with the sense of properly using them.
Intensive emphasis is also given to enhancing the students’ writing skill, so that the students can fulfil
their own daily needs of writing. This includes writing simple letters to technical reports. We believe
that with the efficiency achieved from the Language Laboratory, the GIMT students will find it easy to
accommodate themselves in the present dynamic corporate scenario and will contribute invariably.
To facilitate more, we have a provision for special Communication classes right from the beginning (1st year 1st semester) apart from our regular classes of the curriculum. Special attention is also given to Soft Skills development and Interview Techniques through special sessions on Grooming and Mock Interviews. At the English Language Laboratory we deliver the following:
1. Listening, Speaking, Reading and Writing Skills through LearnerSoft Software. 2. Listening Sub-skills through audio and video aids. 3. Reading Sub-skills through Interesting reading material from net and newspaper 4. Daily Newspaper reading habit and pasting of news clipping in the Laboratory Book. 5. Technical Report Writing and other Communicative writing Skills like Letters, Proposals, Emails. 6. Speaking through Group Discussion, Presentation and Role Play & Simulation. 7. Creative Story Telling and other interesting Group activities. 8. Group Discussion learning & practice through audio and video aids and live examples. 9. Corporate Presentation Technique through Power Point Presentation and necessary video aids. 10. Telephonic and Body Language etiquettes. 11. Interview Techniques and Grooming with special attention to Dress Code and Body Language.
Faculty Strength
Established in 2009, as one among the other core departments of Global Institute of Management &
Technology, the Applied Science & Humanities Department is the largest one. The department has
four main streams, namely: Physics, Chemistry, Mathematics and English. Apart from these courses,
there are Values and Ethics in Profession, Economics for Engineers, Principles of Management etc. Our
Department is backed by 12 well-educated, talented and dedicated faculty members to fulfill this task.
In addition to the primary teaching duties discharged by them, many of them have their publications
in National as well as International Journals of repute for attaining perfection in their profession. The
subjects taught by teachers of this department are of prime importance for all round growth and
development of students. Teachers are always ready to guide their students whenever they are being
approached.
Department of Applied Sciences & Humanities offers Applied Sciences and Humanities Courses as prescribed by the curriculum of the University not only in the 1st year of Engineering programmes, but also in the 3rd, 4th, 7th and 8thSemesters. So, there is a strong need to build a strong foundation for the prospective and promising Engineers.
We are proud to declare that the Department is successfully carrying the mission to create and disseminate knowledge and tools in intellectual areas at the interfaces between areas of engineering and other core areas of Applied Sciences and Humanities. It will keep on striving for excellence and perfection.
Teaching Process:
There is a great emphasis on core fundamental in classroom and examinations are designed to test
the applicability of these fundamentals in real life situation. Course work is augmented by seminars,
presentations and course projects to teach the depth of understanding of subject.
Faculty and Staff members of Applied Science & Humanities Departments
Mathematics
Dr. Nasreen Khan Asst. Professor & HOD M.Sc, Ph.D
Mr. Nabin Sen Asst. Professor M.Sc.
Ms. Debolina Bit Asst. Professor M.Sc.
Management
Ms. Moutusi Sarkar Visiting Faculty B.Tech, MBA
Mr. Tridip Nath das Visiting Faculty M.Com, MBA
Physics
Mr. Mithun De Asst. Professor M.Sc.
Mr. Amit Kumar Das Asst. Professor M.Sc.
Mr. Pradip paul Tech. Assistant B.Sc., M.Sc. (Pursuing)
Chemistry
Mr. Aniruddha Roy Asst. Professor M.Sc.
Mr. Nirmal Paul Tech. Assistant M.Sc.
English
Mr. Manas Moulic Asst. Professor M.A., Ph.D (Pursuing)
Mr. Prasenjit Bhattacharjee Asst. Professor M.A. (Double), B.Ed
Ms. Labanya Ray Mukherjee Asst. Professor M.A.
Central Library, GIMT
The Central Library of GIMT – a well stacked library containing all latest edition of the publications
related to the curriculum was established along with the establishment of the college in 2009. Since
then, the Library has increased its strength to live up to the expectation to its users.
The library is fully automated through Libsys Software. At present library has a good collection of
about 29000 number of books with 1350 number of titles of different subjects. Library subscribes a
good number of International & National journals, magazines and daily newspapers. It is well-
equipped with all modern facilities and resources in the form of e-content, CD-ROM, books, journals &
also e-journal etc. The library is committed to provide a world class information support to its users by
interlibrary loan, reprographic services & downloading from internet etc.
Our college is life member of “The Institution of Engineers, India (IEI)”, as a member we receive all
publications of IEI regularly (15 divisional Journals and Newsletter).
Library is open from 09.00 A.M. to 05.00 P.M. on every working day (Tuesday to Saturday). There is a
separate reference section for faculty & staff for study purpose. All reference materials including
Books, Handbooks, Encyclopedias, Different project reports, seminar proceedings, Printed Journals,
old questions are kept for reference carefully. Library has also separate reading section for the
students where 120 number of students can study or refer any library materials.
Hostel Accommodation: The College offers well-furnished Hostel for both boys & girls in and outside the campus. Its adequately spacious and well-ventilated rooms provide a comfortable stay to the students. The Hostel is equipped with 24 Hours power supply along with a hygienic canteen for and RO filter water supply. Indoor games & TV sets are provided in the Common Room for the relaxation of the students during leisure. Medicate facilities are also available on hand for students round the clock. Hostel is under a resident warden and a Hostel Superintendent to guide the students properly to provide them with homely atmosphere. Hostel Facilities:
Hygienic Food Fast Food Cold water Tea & Coffee Centre Wi-Fi network 24X7 power supply Common Room TV set Medicare Security
Research & Development Activities: Global Institute of Management & Technology always strives for excellence, imparting high quality technical and management education among the vast youth talents, with a special emphasis to Research and Development. The Institute has already organized two National Conferences. The first National Conference, ‘Transcending Boundaries’ on “Importance of English Communication & Soft Skills in Profession” was organized on 18th and 19th January, 2013. The next National Conference ACER’13, held on 22nd and 23rd March’ 13. Delegates, educationists from various educational fields participated in both the conferences and shared their valuable research outputs. After the grand success of these two National Conferences, GIMT organized its 1st International Conference on “English Language in Technical Education” (ELITE 14), organized on 14th and 15th February 2014. Delegates, educationists from various educational fields from all parts of the world enriched the conference with their valuable contributions. GIMT is honored to have such guests like Dr. Meenakshi Raman, Professor, BITS, Pilani, Dr. Arifa Rahaman, President, Bangladesh English Language Teachers’ Association (BELTA) and Professor, University of Dhaka and Mr. M.K. Raina, eminent theatre personality and veteran actor from Bollywood Film Industry. GIMT is highly committed towards fulfilling its students with all kinds of useful training which may be useful for them to face the global challenges in this rapidly moving world. With a vision to give the students the best, GIMT organized a 2 days’ National Workshop cum championship on Robotics in collaboration with IIT, Kharagpur and Magniva Technologies on 28th February and 1st March, 2014. GIMT also organizes seminars and workshop for the development of all the staffs of the Institute as GIMT believes in the quality human resource power. ABISHKAR’13 is such a workshop, held on 12th and 13th July’ 13. The Institute is not only committed towards its own students but also committed towards the welfare of the Students-Society as a whole. With a view to finding out the hidden talents, the Institute conducted a “Global Talent Search Examination” with the school students all over West Bengal.
Almost 2705 students took part in the Programme. The Institute is honored to reward some of the meritorious students for their encouragement and development.
Cultural Activities:
The college provides its students numerous opportunities for co-curricular activities to enrich their cultural interests. The cultural committee of the college works with the objective of developing the academic and cultural talents of the students, improving their capabilities to work as a team and raising their
level of self-confidence in interacting with fellow students and peers. The college encourages the students to take part in a wide variety of cultural competitions such as singing, dancing, debates, creative writing etc. and holds various cultural activities throughout the year. Cultural activities organized by the committee include the two days’ annual cultural festival "Maffick", which is organized usually in the month of April and includes a number of various cultural activities. The Institute is thankful to the National and International artists of repute for performing in the Annual festivals of the college. There was a fully thrilling enjoyment in the performance of the Musical Bands like Fossils, Kalpurush, Bolpur Bluz, Raeeth (from Pakistan), M-Sonic (from Guwahati), and the popular Bengali singer Shilajit. The Institute is grateful to have Mr. Tapas Paul, honorable Member of Parliament, Krishnagar Constituency as the Chief Guest in Maffick’14.
Freshers’ welcome ceremony is also organized every year by the students of the college to welcome the newcomers through different cultural activities. The programme acts like a bridge between the newcomers and the existing students, faculties and staffs and honorable Management Members. The newcomers are also given chance to showcase their talent in the programme and Mr. Fresher and Miss. Fresher are selected based on their performance for their encouragement in creativity, leadership quality and team spirit.
All students who wish to participate in the cultural activities contact their Institutional Staff Cultural Coordinator and register their names.
The Institute believes in the spirit of reunion and exchanging hearts with one another. That is why, a Get-Together ceremony is also organized for all the Faculty and Staff members along with their family members. ‘Kolahol 13’ is such a programme.
Sports: As the proverb says, “All study and no play makes Jack a dull boy”, sports play an integral role in overall development of students in GIMT and due emphasis is laid on games and sports. The college campus is well equipped with a TT tables, a cricket field, Volleyball court etc. to facilitate the students to nurture their sports skills and promote their physical health. GIMT has a big play ground where the students practice and cultivate their sports activities. The Annual sports ‘Sprint’ is organized every year for the students on their way to all-round development and perfection. The sports ends with a friendly football or cricket tournament between the Faculty and Staff members and the students of the college. Arrangements are also made to send the students to other colleges for tournaments like University tournaments for volleyball, cricket and football.
Admission Procedure Eligibility Criteria for B.Tech: 10+2 pass out with Science background, combined score of Physics, Chemistry & Mathematics (PCM) – 45% for GEN and 40% for SC/ST/PH.
Selection Process: Valid Rank holders of West Bengal Joint Entrance Examination (WBJEE)/ All India Engineering Examination (AIEEE) appeared in the Centralized Counselling organized by Central Selection Committee. For Diploma Holders (Lateral Entry) Selection Process: Valid rank holders of the West Bengal Joint Entrance Lateral Entry Test (JELET) at the third semester (2nd Year) through the same process as above. Eligibility Criteria for Diploma Engineering:
Madhyamik pass out with 35% in aggregate (Including English and excluding the Additional subject) and with combined score of Physical Science and Mathematics – 45%
Valid rank holder of JEXPO
Documents required for Admission to B.Tech:
i. 10 copies pass port size photograph ii. Photo copy of age proof certificate iii. Copy of 10+2 Examination Mark sheet iv. Registration/ Migration Certificate v. Original School leaving/ Character Certificate vi. WBJEE/ AIEEE rank vii. Medical certificate with Blood group and Eye sight in original viii. Allotment paper of Counselling (if applicable)
Documents required for Admission to Diploma Engineering:
i. 10 copies pass port size photograph ii. Photo copy of age proof certificate iii. Copy of Madhyamik Examination Mark sheet iv. Original School leaving/ Character Certificate v. Admit card and Rank card of JEXPO vi. Medical certificate with Blood group and Eye sight in original vii. Allotment paper of Counselling
Training & Placement
The Institute has already tied up with more than 65 Industries for imparting summer training, internship and projects. The Institute also tied up with topnotch IT and Core companies for necessary accreditation. The Department plays a major role in the following areas.
i. Organizing Summer Training ii. Identifying and organizing job opportunities iii. Internships and Projects iv. Industry-Institute Partnership Activities v. Organizing Soft Skills training programmes vi. Organizing technical ability test and mock interviews vii. Campus Interview Some of the Companies for Training, Projects & Internship: The West Bengal Power Development Corporation (A Govt. of West Bengal Enterprise), Durgapur Projects Ltd, Hindustan Motors, CESE Ltd, Gammon India Ltd, Britannia Engineering Ltd., Garden Reach Ship Builders & Engineers Ltd., SAIL, Andrew Yule & Co., TATA Metalliks Ltd., Indian Oil Corporation (IOC) and many more. Placement The Department handles the campus recruitments as it helps to attract some of the best companies to the campus for the placement programme. GIMT is fortunate enough to work with some of the leading names in business including – Aditya Birla Group, Tantia Construction, Genpact, Rashmi Group, S.S. Civil Construction, VIJ Construction, EPA Infra, ABCI Infrastructure, SVEC Construction, Tech Savvy, Condor Power, DD Group, J.K. Automation, Magnaj Innovations, Hueclay, Itech Vardhan, Global I Technologies, Energy and Engineering, Prabhakar Udyog, Well Water Services, Perennial Technologies, Gurukripa Engineering, Jyoti Engg., Kanoe Software, Barflex, Ruva, Power Max, RKS Engineers and Consultants, EXL Infotel, SPANCO etc.
Prohibition of Ragging As per the directions of the Honorable Supreme Court of India, “Ragging is criminal offence and is totally banned and anyone found guilty of ragging and or abetting ragging is liable to be severely punished.” All Indian Council for Technical Education (AICTE), New Delhi vide its Notification no. 37-3/Legal/AICTE/2009 dated 25.03.2009 has taken a very serious view of ragging incidents in educational institutions and on Directions of the Honorable Supreme Court of India vide its order dated 16.5.2007 has ordered strict implementations of rules and regulations for prevention and prohibition of Ragging in technical Intuitions.
Keeping in view of the above order, GIMT always maintains zero tolerance to ragging within the college campus and hostel. The Institute has a very active Anti-Ragging cell which keeps alert watch, so that such unpleasant incident may never happen. If any such incident has ever taken place, the committee has immediately taken drastic action against the accused after thorough and justified investigation. In this regard, the Institute strictly follows the rules and regulations, suggested by the Honorable Supreme Court of India and AICTE. Punishment: The punishment to be meted out to the persons indulged in ragging has to be exemplary and justifiably harsh to act as a deterrent against recurrence of such incidents. The students who are found to be indulged in ragging would be debarred from taking admission in any technical intuition in India. A First Information Report (FIR) is to be filed against every single incident of ragging without exception by the intuitional authorities with the local police authorities. Depending upon the nature and gravity of the offence as established by the Anti-Ragging cell of the intuition, the possible punishments for those found guilty of ragging at the institution shall be any one or any combination of the following:
Cancellation of admission.
Suspension from attending classes.
Withholding or withdrawing scholarship/fellowship and other benefits.
Debarring from appearing in any test/examination or other evaluation process
Withholding results.
Debarring from representing the Institution in any regional, national or international meet, tournament, youth festival etc.
Suspension/expulsion from the hostel.
Rustication from the Institute for period ranging from 1 to 4 semesters.
Expulsion from the Institute and consequent debarring from admission in any other institution.
Fine of Rupees 25.000/-
Collective punishment: when the persons committing or abetting the crime of ragging are identified, the institution shall resort to collective punished as a deterrent to ensure community pressure on the potential raggers.
Intimation of the crime of ragging and actions taken against such crime to the Council.
Continuing with the awareness programme against ragging.
Anti-Ragging Committee An Anti-Ragging Committee and an Anti-Ragging Squad have been formed as per the directions of Hon’ble Supreme Court to prevent Ragging. Anti-Ragging Committee of the Institute for the academic year 2014-15 is hereby consisting of the following members – Anti-Ragging Squad has also been formed for better functioning with a promise to make GIMT a ragging free campus.
1. Dr Asok Kumar Majumdar,Principal—Chairman (9475824920)
2. Mr. Sujit Majumder,Registrar--- Member (7407056655)
3. Dr. Nasreen Khan, HOD ASH Dept—Member (9733950546)
4. Mr.Subhasis Chatterjee,HOD Civil Dept.—Member (9163703808)
5. Ms.Sagnika Bhattacharjee, HOD EE Dept.--- Member (9832339432)
6. Dr.Abhijit Chakraborty, HOD ME Dept.—Member (8335852167)
7. Mr. Koushik Choudhari, Asst. Registrar--- Member (7407112266)
8. Representative District Magistrate—Member
9. Representative SDPO—Member
10. Local News Reporter-- Member
11. Local NGO—Member