analogue output module mout-4 module description...the mout-4s module is a component of the ampio...
TRANSCRIPT
![Page 1: Analogue Output Module MOUT-4 MODULE DESCRIPTION...The MOUT-4s module is a component of the Ampio Smart Home system. It has four voltage outputs. The output voltage may be controlled](https://reader033.vdocuments.net/reader033/viewer/2022051915/60071f337054287dfd75907f/html5/thumbnails/1.jpg)
Analog output module MOUT-4s
General featuresThe MOUT-4s module is a component of the Ampio Smart Home system and has been designed for integration with devices with control voltage input, compatible with one of the following standards: 0-10V, 1-10V, 0-5V.
There is a variety of devices, available in the market, which may have their parameters adjusted by applying suitable voltage to the control input. It can be for examplelighting fixtures, recuperatorsand much more.
The module has four voltage outputs. The output voltage can be controlled within range of 0-10V.
Module is controlled via CAN-Bus. Required voltage to power the module is 11-16V DC.
The device is equipped with two connectors: CAN bus and outputwith ground. There are five LED indicators: four red and one green.
The green LED indicates the status of CAN communication
one regular flash every 1 sec. - CAN-Bus communication in order two regular flashes every 1 sec. - module is not receiving information from other SmartHome modules three regular flashes every 1 sec. - module cannot send information to CAN-Bus
The red LEDs indicate control states of individual outputs.
ProgrammingThe module may be programmed with a special programmer,available for authorised technicians, and the Ampio SmartHomeCAN configurator software. This program provides for setting upthe module’s response to input signals and other informationfrom the CAN bus.
MODULE DESCRIPTION
ver 1.6, 02.09.2020 Copyright © 2020 Ampio Sp. z o.o. All rights reserved. This document is not intended for reproduction or distribution.
www.ampio.pl
Technical dataPower supply voltage
11-16V DC
Current consumption 30 mA
Dimensionswidth 35 mmheigth 120 mmdepth 65 mm
maximal 455 mA quiescent
Single output load capacity 100 mA Number of analog outputs 4
![Page 2: Analogue Output Module MOUT-4 MODULE DESCRIPTION...The MOUT-4s module is a component of the Ampio Smart Home system. It has four voltage outputs. The output voltage may be controlled](https://reader033.vdocuments.net/reader033/viewer/2022051915/60071f337054287dfd75907f/html5/thumbnails/2.jpg)
Analog output module MOUT-4s
Dimensions expressed in mm
90
12
0
35
55
.75
30
65
45
MODULE DIMENSIONS
ver 1.6, 02.09.2020 Copyright © 2020 Ampio Sp. z o.o. All rights reserved. This document is not intended for reproduction or distribution.
www.ampio.pl
![Page 3: Analogue Output Module MOUT-4 MODULE DESCRIPTION...The MOUT-4s module is a component of the Ampio Smart Home system. It has four voltage outputs. The output voltage may be controlled](https://reader033.vdocuments.net/reader033/viewer/2022051915/60071f337054287dfd75907f/html5/thumbnails/3.jpg)
Analog output module MOUT-4s
+11-16V
stabilised DC
IN IN
A device with control voltage input.
A device with control voltage input.
*Independent
power supply 11-16V
CAN network 4
CONNECTION DIAGRAM
∗external power supply connected for the purpose of bus load reduction
ver 1.6, 02.09.2020 Copyright © 2020 Ampio Sp. z o.o. All rights reserved. This document is not intended for reproduction or distribution.
www.ampio.pl