and sf green pack

7/31/2019 And Sf Green Pack

1/20

www.greenpacket.com

APPLICATION NOTE

Dynamic

DataOf

oading

Connect

Intelligen

tlywithA

ccessNe

tworkDiscove

ryand

Selection

Function

(ANDSF

)


2/20

Abstract

The arrival of varied smartphones and devices has inevitably encouraged greater data consumption.

Users are now more sophisticated and demand nothing less than best network performance and

willing to switch providers at the slightest dissatisfaction. Smartphone generally accounts for higher

ARPU and represents potential new revenue streams for enabling quad play services. Operators areaggressively addressing these challenges and improving the quality of their solution to retain existing

customers and offering better service experience to build loyalty.

WiFi adoption as data offloading is gaining momentum as it improves user experience while lowering

the cost of service providers. Correctly implemented, it can ease up to 20% of traffic with substantial

impact of freeing up the spectrum and load balancing. Offloading data to WiFi hotspots is

economically attractive, because many carriers already operate a substantial number of hotspots.

In this paper, we will examine how dynamic data offloading can be further optimized with 3GPP

based Access Network Discovery Selection Function (ANDSF). ANDSF describes how the

inter-system mobility between 3GPP systems and non-3GPP systems (ie: WLAN, WiMAX, CDMA)

policies and priorities can control the conditions for which a device (UE) connects to which wireless

network. Operators have the flexibility to manage context information in network discovery and

selection procedures in push and/or pull mechanism with a policy management and control

component as network-based and client-based solutions. The client-based implementation is

described with reference to applying real-time connection state and policy control. Policy

enforcement and policy management is mapped more accurately with an overall knowledge of the

network at any given point of time. By intelligently managing the distribution of network load,

congestion can be minimized.

APPLICATION NOTE

APPLICATION NOTE


3/20

Contents

Overview 01

Dynamic Data Offloading a Study Model 02

- WiFi or Femtocell

- Why Introduce Dynamic Data Offload (DDO)

- Data Offloading Tool

- WiFi Data Offloading

Access Network Discovery and Selection Function 07

- Where is the Intelligence in Dynamic Data Offloading

ANDSF Implementation 10

- Policy Control with ANDSFValues of Dynamic Data Offloading Capability with ANDSF 12

- Prioritization of Access Based on Network Availability

- Time Based Policy Control

- Application Policy Control

- Power Management

- Traffic Routing

Conclusion 14

Offload Early, Connect Intelligently 15

References 16

APPLICATION NOTE


4/20

OverviewMobile networks are inherently constrained with the availability of spectrum and bandwidth to support the rapidly

growing demands of mobile data. In a recent report by Cisco, it is estimated that global mobile data traffic growth will

increase by a factor of 26 times between 2010 - 2015.

The way we interact with the internet is changing. The arrival of data-centric devices (eg: iPhone, Android , Blackberry),lower subscription prices, easy access to applications is driving data consumption and content like never before. Even

with operators implementing transcoding methods to adapt smaller screen sizes, for pictures and videos , operators still

struggle to satisfy data demands, managing congestion and improving subscriber experience.

WiFi offload is an alternative method to ease the burden of bandwidth capacity. However, the methodology of offloading

can be made either tightly-coupled or loosely coupled to the core network. In the tightly-coupled method, the network

operator retains visibility and control over the traffic offload related to the location where traffic streams are offloaded or

bypassed over the network operator and relevant policies provisioned. Overall data offloading implementation can be

more secure and comprehensive by complementing i-WLAN framework with dynamic data offloading. Further

information to i-WLAN can be referenced in a previous whitepaper titled Managing Data Offloading Securely over WLANaccess networks via I-WLAN.

Within the loosely-coupled method, data offload is unmanaged. By forcing the user onto WiFi, the network operator has

no visibility on the user traffic and not subject to the operators policies. The user experience associated to the

accessibility of service for example to web browsing, online shopping, downloading music or streaming video will be at

risk of un-trusted network attacks such as disclosing or tampering of user details. Other issues pertinent, which may

involve some form of credit card purchase. Such transactions are not subject to operator controlled service rules since

the user subscription relationship is decoupled from its control policy.

The applied access rules previously enforced within the walled-garden parameters will be lost once the IP trafficbypasses the packet data network (PDN) en-route to the Internet directly. These IP traffic is identified and routed purely

on the IP address regardless of the policies enforced on the service application level.

Source: The Cisco Visual Networking Index (VNI) Global Mobile

Data Traffic Forecast Update 2011

APPLICATION NOTE 01


5/20

Dynamic Data Offloading a Study Model

Networks are generally not equally utilized at any given time. Take for example a 3G cell site in the central business district

of Kuala Lumpur during peak hours will have full utilization. The 3G cell supports up to 20 users at 14.4Mbps (assumes

average throughput of 512kbps/user). Due to congestion, the number of user doubles to 40, but the average throughput

per user is halved and continues to provide data services at sub-standard speeds with the risk of user dissatisfaction.

However, another operator operating an alternative access technology (be it WiFi or WiMAX) within the vicinity ofoverlapping the 3G cell site is not fully loaded. Often, the internet bound traffic does not contribute to ARPU but occupy

the network capacity. How effectively can the 3G operator capitalize on the availability of bandwidth capacity of the

adjacent WiFi network to balance the network load efficiently and improve user experience?

WiFi or Femtocell

Given that spectrum is a premium limited resource, operators are turning to WiFi or femto-based offload to ease traffic

needs. The stark difference between WiFi and femtocells lie in the spectrum utilization. WiFi operates in unlicensed bandwith a larger bandwidth capable of supporting data rates of 11Mbps up to 54Mbps (peak theoretical) and couples the

backhaul onto the fixed line, effectively freeing-up the 3G spectrum and improving capacity. Femtocells on the hand,

operates in licensed band wirelessly over the shared air interface of 3G network. Femtocells can improve indoor

coverage, but not increase capacity.

WiFi offload improves capacity at a fraction of the cost, since there is already WiFi infrastructure readily available.

Dynamic Data Offloading can be initiated with an intelligent connection client in the device (UE). The device (UE) is able

to determine the subscriber state early in the network and exchange information with the policy controller in real-time to

adjust network connection state.

APPLICATION NOTE 02


6/20

Why Introduce Dynamic Data Offload (DDO)

The periodic traffic surge is noticeable during peak hours. Instead of adding a second carrier on the 3G network or

adding new cell sites with impacts on radio planning and so forth, operators can take advantage of dynamic data offload

early to detect congestion and re-route the traffic to alternative WiFi access. The network selection and discovery

capability is heavily dependent on the intelligence behind connectivity. The main drivers for DDO is apparent in

- Improving over the air radio capacity

- Relieving transmission backhaul dependencies

- Delaying CAPEX investment for network upgrade

- Subscriber retention and improving user experience

- Creation of new revenue streams as a result of better analysis of usage behavior

- Separation of revenue generating traffic and low value bulk internet traffic

- Scalability of single connection client without cost impact to backend processes

Data Offloading Tool

Greenpackets Intouch Connection Management Platform (ICMP) is an easy to use, single-client connection

management solution that combines device (UE) and user management. The single-client software converge multiple

network access and executes data offloading transparently. Incorporating customizable features and capabilities, the

ICMP can intelligently detect the availability of access networks based on signal strength and user policies allowed for

accessing certain data services on a cellular network (such as 3G) and if there is less congested alternative network (such

as WiFi, WiMAX, EVDO) available in the same vicinity. ICMP switchers the user from 3G to WiFi without interruption to

connectivity by ensuring a seamless user experience. As a result of the in-built intelligence, the ICMP can determine the

best available networks for data offload within the pre-loaded local policy in the absence of network policy. The added

advantage of the make before break further enhances the seamless connection experience, without requiring a switch

of different connection profiles.

Figure 1: Intouch Connection Manager GUI.

APPLICATION NOTE 03


7/20

Operators that have aggressively embraced a WiFi offloading strategy, such as PCCW and AT&T Mobility, estimate that

about 20 % of their overall data traffic is over WiFi networks.

In cases where operators do not operate WiFi networks but extends its coverage often partner a 3rd party WiFi provider.

Such wholesale method to support the additional traffic for a fixed cost is a feasible option with no direct impact to theexisting infrastructure and backhaul requirements.

With the acquisition of Wayport, AT&T expanded its WiFi network to offload traffic from its cellular network as a network

growth strategy. With coverage of 85%, it is an example of a successful WiFi offload strategy to ease the burden on its 3G

mobile broadband where the carrier has suffered as a result of iPhone driving data usage. Most* of AT&T's smartphones

now support auto-authentication at the carrier's AT&T-affiliated WiFi hotspots, which number more than 23,000-- WiFi

usage does not count against a subscriber's monthly smartphone data usage plan.

*source: Wi-Fi offload for mobile networks: 20% of traffic and counting

FierceBroadbandWireless http://www.fiercebroadbandwireless.com/special-reports/

wi-fi-offload-mobile-networks-20-traffic-and-counting#ixzz1MsZdbugd

WiFi Data Offloading

The efficiency of offloading 3G cell to WiFi can be studied from the data rates, coverage radius and the density of

subscribers supported. The other considerations primarily will revolve around the transmission backhaul and

installation relevant in the CAPEX investment. Details of cost savings related to data offloading are not discussed here.

Reference to a previous whitepaper Operators Can Save $14 million Yearly Through Data Offloading, a TCO Study

describes it separately.

The efficiency of network planning directly impacts the performance and quality of the network. There is no defined

notion on the best network. Congestion is measured against how much data traffic deteriorates to affect user experience

that is expected of the service.

The support of voice service is 12bkps. Theoretically, in a given single 3G carrier at 5MHz channel bandwidth, S 111

configuration, it can support up to 1,000 voice subscribers. The number of subscribers supported per cell is dependent

on the radio planning parameters for a given speed and average throughput per cell. In case of a data service, the

minimum data speed is 256kbps to support VoIP.

For a given WiFi cell, the average cell throughput is 11Mbps (802.11a standard). It can go up to 54Mbps (802.11gstandard). The added advantage of WiFi is the greater channel bandwidth of 22MHz. Therefore, the achievable cell

throughput is higher by a factor of 4.

The study of WiFi channel deployment and 3G channel deployment can be looked at the capacity efficiency. Assuming

the comparison is made on average data speeds of 512kbps for both WiFi and 3G. A typical 3G carrier can deliver

average throughput per cell of 14.4Mbps. If under normal condition, the node B can support up to 28 subscribers at

the average 512kbps per user. Given that congestion occurs by 70% utilization, the number of active subscribers

supported per node B is approximately 20. (Active subscribers is defined as active concurrent users, excluding idle

and connected subscribers)

In WiFi (802.11 a), there are up to 3 non-overlapping channels. Therefore, the total throughput achievable is up to

33Mbps. At 70% utilization, the active subscribers supported per WiFi cell is approximately 45. The capacity supported

is 55% greater than a 3G node B.

Operator owned WiFi and Partner WiFi

APPLICATION NOTE 04


8/20

In terms of the coverage, a 3G cell range is up to 5 times of a typical WiFi cell range. Within a dense urban morphology,

a 3G cell range can vary between 1-2km. (cell ranges are inter-dependent on radio planning parameters such as various

modulation schemes, terrain, density of subscribers, achievable speeds. This assumes the average vehicular speed of

30km/hour). On the contrary, WiFi cell range vary between 100-200m, equating to more WiFi APs per km2 coverage

radius. Despite WiFi cell range of 5 times less than a 3G node B (for every 1km, 5 WiFi APs are required), the trade-off of

cell capacity is far greater.

If for example the density per area is 1,000 users (assumes single device (UE), single user)per 1km2 radius with 70%

active users; the 700 active subscribers requires up to 35 3G cell sites to support. However, with WiFi the number of cell

sites is 55% less at 16. A typical WiFi AP cost is around USD100-200, while a 3G node B is USD30,000. For an

equivalent number of cell sites, the CAPEX savings are significant. Instead of deploying more node Bs, operators can

leverage on the WiFi network within the vicinity as means of extending its coverage and relieving heavy internet traffic

during or off peak hours.

Average node B of S111 configuration in emerging markets.

0

5

10

15

20

25

30

35

40

Site Count

3G WiFi

Supports up to 20

active users per site

Supports up to 45

active users per site

Figure 2: WiFi and 3G Site Count Study for average user throughput of 512kbps.

APPLICATION NOTE 05


9/20

WiFi architecture exhibits significantly higher data rates than 3G and it could be easily modified to increase the number

of connection to open or partner WiFi network with the presence of a WiFi AP. 3G provides continuous connectivity

over further cell range, with lower data rates and relatively high cost while WiFi is intermittent with high bursts of data

(other consideration excluded in this study includes the impact of backhaul, leasing of transport network and

installation works).

With better control over data offload solutions, such as dynamic data offload via Access Network Discovery andSelection Function (ANDSF), operators can understand the user state and commensurate network state contributing to

congestion. Most importantly, it detects the source of congestion trigger and resolves the issue early, before it affects the

service experience. The intelligent ANDSF enabled connection client can push connection status with granularity such

as location corresponding to cell ID or SSID to the Policy Charging and Rules Function (PCRF). The PCRF perform

real-time policy response network state at applications to identify the congestion point. Each service stream can be easily

identified by the IP address where it originates and the destination IP. By having a direct connection to PCRF, the policy

information is pulled by the ANDSF connection client to determine whether a handoff is necessary to maintain the

connection as applied in the examples above.

The PCRF server in this instance is 3GPP ANDSF standard compliant. ANDSF module can

exist independently or implemented within proprietary policy control and management server

that may comprise of several functional modules, depending on the network architecture.

Figure 3: Cost Comparison of WiFi AP and 3G Node B.

IncreasingC

ost

Additional

Base Station

WiFi AP

Increasing Capacity

55% greater

capacity

APPLICATION NOTE 06


10/20

Access Network Discovery and Selection Function

Access Network Discovery and Selection Function (ANDSF) is a 3GPP standard defined in TS 22.278, TS23.402 and

TS24.312 specifications through which the operator can provide inter-system mobility policies and priorities to control

where and when, the conditions for which a device (UE) connects to which wireless network. It supports the

inter-working solution between 3GPP networks and non-3GPP access (ie: CDMA, WiMAX, WLAN) combining

network-based and client-based solutions for both trusted and un-trusted non-3GPP access networks.

For operators which have both WiFi and 3GPP infrastructures, it is possible to use ANDSF to implement dynamic data

offload. Dynamic data offload can complement WiFi data offloading in a structured method. Within ANDSF, the context

of offload can be made more accurately at the user level ie: bearer-aware and closely coupled to the policy management

and control component4 (eg: PCRF server). Instead of relying heavily on the policies enforced at the core network

(backend), actual decision making process can be made real-time as a result of direct relation to the user activity at the

device (UE).

The motivation for implementing ANDSF is largely driven by the need for better bandwidth utilization. Bandwidth

utilization is highly relevant to the control and optimization for mission critical applications like VoIP, P2P streaming andvideo streaming.

In the following sections, we will discuss the impacts of applying intelligence in data offloading, where operators have the

flexibility to manage context information in network discovery and selection procedures in push and/or pull mechanism

with a policy management and control component. The study of ANDSF will be described from a client-based

implementation on the device (UE). Operators controlled and service-aware selection of wireless networks can bring

benefits to the operator looking to offload using WiFi. The ability to retain visibility of which IP traffic is routed over WLAN

(eg: best effort internet traffic like email, web browsing, which are non-revenue generating) and which IP traffic is

maintained on the 3G link (eg: VoIP that is quality sensitive). This may contribute to better understanding of the traffic

models relevant to minimizing congestion.

4 Policy management and control component is used interchangeably with

PCRF in this application note.

APPLICATION NOTE 07


11/20

Where is the Intelligence in Dynamic Data Offloading

Todays network is mixed with dual radio scenarios, such as WLAN and 3GPP based networks (ie: WiFi-3G). The two

access networks are not aware of each other. It lacks the intelligence to control the access network of the device (UE)

state in the other access network. Given that WLAN is not a controlled access network and works in unlicensed

spectrum the only network condition of radio quality and the performance through that WLAN is made available only to

the device (UE). Hence, the device (UE) is better positioned to decide the connectivity options. Most often, the network

selection is managed by a connection manager in the device (UE).

Figure 4: Dynamic Data Offload with ANDSF.

Internet

Mobile Broadband

(3G UMTS)

Operator Core Network

Connection Manager Policy Controller

Each Network Policy includes:

Access Technology Type (3G, WiFi) Network Discovery List (3G, WiFi SSID)

Access Network Priority Policy Validity (8 hours) Location

APPLICATION NOTE 08


12/20

WHITEPAPER

Default connection at RAN may not always be most optimal at a given point in time from core network connectivity, the

end-user, application or service perspective. However, intelligent connection managers allow it to search and prioritize

the best available connection based on pre-defined requirements such as signal strength and operator policies. In this

manner, intelligent resource management provides a cost-effective way to support the data traffic by optimizing network

radio resource, balancing the network load, reducing network congestion and delaying CAPEX for future upgrades.

ANDSF may provide a list of access networks available in the vicinity of the device (UE) for all the available access

technology types requested by the device (UE). Instead of unnecessary background scanning, the ANDSF connection

monitoring may be carried out to handover or perform cell selection/re-selection measurements in which the device (UE)

monitors the received signal strength indicator signal levels (RSSI) received from different base stations. This reduces the

battery drain on the device (UE) without continuously scanning in the background.

By selectively triggering the connection of device (UE) to a given threshold or the preferred available access network

types based on inter-system mobility policies, the network load can be balanced or spread out to the availability of

network radio resource at the point where congestion is likely to occur. Once the device (UE) receives the policy

relevant to location and validity of time interval, the ANDSF will apply the current conditions to match the policy.

Policies can be tailored for different access networks, regardless of devices (UE) to enable seamless connectivity

experience. In the longer term, effective access network monitoring can reduce the pressure of CAPEX upgrades to

sustain the increased capacity.

The added intelligence of ANDSF brings benefit to the negotiation of connection state by various operator policies

supported as

Location-Aware Policy cell ID or associated SSID is checked against the policy database for specific locations that

are preferred/relevant

Access Network Discovery Policy list of available access networks(RAT type) that are available within the vicinity and

facilitation of prioritized access network selection for network handover Time-based Policy configuration of policy validity time to live interval to current location and profile

Subscriber-based Policy dynamic allocation of subscriber package and profile

APPLICATION NOTE 09


13/20

ANDSF Implementation

Policy Control with ANDSF

Although operators are increasingly looking at using WiFi for offload in congested areas, it risks losing visibility over traffic

policies that were configured for the user once it routes through WiFi. What is lacking is a way for the network to

communicate to users (applications and/or websites they are using) a real-time or predicted measure of the networkscongestion levels.

ANDSF keeps a direct relationship to the core network by providing dynamic provision of information to the device (UE)

for network discovery and selection procedures related to non-3GPP accesses; the ANDSF connection client can pull

and/or with a combination of pull-push may be supported with the policy charging and rules function (PCRF). ANDSF

complements both the PCRF and Deep Packet Inspection (DPI) module. By means of direct device (UE) communication

at applications level towards the PCRF, the ANDSF provides indication to the device (UE) on the selection of network by

reducing over the air processing required in the device (UE) to establish the wireless link.

Figure 5: ANDSF Architecture

Connection

Manager Server

Pull relevant

connection policy,

cell-ID, time

ANDSF client in CM

Push policy decision

based on location, subscriber

entitlement, application type

GGSN / PDSN

3GPP Access

WAG

Non-3GPP Access

Policy Control

ServerApplication

Server

Subscriber

database server

Internet

3G Network

APPLICATION NOTE 10


14/20

Detecting users, locations, applications or device (UE) type is crucial in determining the conditions for triggering offload,

and under what circumstances. Increasingly, applications and devices (UE) are becoming more aware of their context

what network they are connected to, what is the state of performance of the network and so forth for a given time and

location.

The ANDSF connection client pull subscriber state information (location based cell ID, preconfigured policies and time

configurable connection policy), from the PCRF. The ANDSF connection client will check the existing policy. If the policy

is alive, it applies the current policy. Otherwise, the ANDSF connection client will request for a new policy. Similarly, the

business rule engine in the PCRF pushes dynamic and subscriber specific policy decisions by checking the subscriber

specific data (eg: subscriber package, access entitlement/restriction) accordingly.

Based on this information, PCRF dynamically modifies the connection policy rule depending on the type of policy control

required, acting as a policy management point. The policy decisions are delimited by validity of the location, time of day

and discovery information. The ANDSF connection client is an intelligent module that learns of subscriber state and

network state parameters over time to detect the corresponding bearer (WiFi, 3G, WiMAX) to the suitability of context

(service, device type) connection. These parameters ensure that the operator retains visibility of which IP traffic are

critical and retained on the 3G or WiFi connection.

Through connection shifts based on context information and by combining knowledge about real-time network levels,

applications and devices (past data usage history), gives greater control on offload strategy rather than a single isolated

measurement of the radio conditions. By re-prioritizing subscribers on a congested cell site or offload all mobile data

traffic or laptop to WiFi, during peak congestion periods, specific times of day, days, weeks or combination of them,

operators can have the flexibility of controlling bandwidth, QoS availability and application-specific service corresponding

to service level agreements.

APPLICATION NOTE 11


15/20

Values of Dynamic Data Offloading Capability with ANDSF

Prioritization of Access Based on Network Availability

During network selection process, the ANDSF can provide a list of access networks available in the vicinity of the device

(UE). The configurable network access discovery is facilitated by the ANDSF connection client that interacts with the

PCRF at the application level communication. Dynamic discovery information of location by ANDSF connection client iscommunicated to the device (UE) in a pull mechanism.

The PCRF provides information and policies on the neighboring cells to determine when to offload traffic or triggered due

to congestion. By means of prioritization of congested networks, the PCRF pushes decisions to the device (UE) via the

ANDSF connection client to manage congestion at per subscriber level or per cell level connection. In data offloading,

the intelligent policy control information exchange with ANDSF complements the offload decisions based on the

availability of WiFi networks in range or otherwise.

Time Based Policy Control

The device (UE) initiated connection switching is a carried out by ANDSF connection client. The ANDSF connection client

downloads the user policy relevant to location, connection policy and configurable time to live policy - matching it

locally to the pre-provisioned operator policy. If the connection policy is alive, it applies the current policy. In case of the

near expiry or already expired, the ANDSF connection client will request for new policy from the PCRF.

Upon receiving the newly generated connection policy from PCRF, the ANDSF connection client replaces the existing

policy with the new policy and the re-prioritized access network list comes into effect until expiry (ie: if switched from

3G to WiFi, the ANDSF connection client shall not connect to 3G network until expiry of policy or change of location).In case of failure to update policy, the ANDSF connection client can apply the localized rule manager within according

to priority, best performance or most economic policy (eg: ANDSF connection clients connection policy is configured

to WiFi by default).

APPLICATION NOTE 12


16/20

Application Policy Control5

The PCRF supports time based metering and subscriber based policy for fair usage control. Take for example a capped

postpaid fair usage plan. Operators usually enforce an average bandwidth threshold policy with flexibility of some burst

access. Through the adaptive policy control approach of the PCRF, the operator has continuous access to real-time

information about the subscribers behavior, collected throughout the session.

If high level of traffic is continuously sustained over the aggregate total usage volume (daily/weekly/monthly) and the

subscriber policy is breached, it may trigger the PCRF to generate a new policy decision based on subscriber specific

data such as data plan/package, access entitlement and usage pattern. Similarly, the ANDSF connection client (at the

per cell-level connection or per subscriber level) interacts with the PCRF data offload module by pushing the available

SSID list within the vicinity to the PCRF access to network bandwidth resources accordingly. As a result, the selective

data-offload is invoked with a re-ordered SSID list. The service level is downgraded to the next service tier to protect the

network against abuse until the congestion subsides. Alternatively, the PCRF can also trigger alert notice to upgrade to

the next service tier subject to charge difference, depending on the implementation configured.

This approach enables the operator to distinguish between temporary, unexpected increases in subscriber traffic and

network abuse. The mechanisms which context awareness from the perspective of PCRF can facilitate policy

enforcement through the device (UE) include configuring WiFi on/off directive and forcing offload through the ANDSF

connection client.

Power Management

The network discovery and selection has been an issue from a device (UE) perspective, because of battery consumption

and turning on and off two radios simultaneously. With real-time network congestion state information from ANDSF

server, the ANDSF connection client may employ the policy to avoid unnecessary background scan by the device (UE)to prolong battery life. Different access networks have different effects on the speed and connection establishment time

that affects the intensity of battery consumption. The access network selection process can be made more efficient with

the ANDSF ordered access network list.

Traffic Routing

Operators routing traffic directly to the Internet as a result of offloading, loose the visibility of control over the subscriber

policies. With a managed data offload approach, operators can have visibility of IP traffic which is routed over WLAN (eg:

best effort internet traffic) and which IP traffic is maintained on the 3G link (eg: VoIP). The combination of PCRF, DPI and

ANDSF to conduct granular data offload, ensures traffic routing across the network allocated to particular services can

be optimized for specific bearer types. By having the visibility of IP traffic, operator can analyze user behavior related to

the bulk of IP traffic generated. The added intelligence can be applied in user segmentation and creation of new service

streams to segregate high ARPU potentials, moderate users and low bandwidth users.

5 Application policy control is part of the ANDSF standard. The deployment is proprietary,depending on the implementation of the ANDSF server and network architecture.Greenpacket ANDSF client is currently testing the functional attribute with select vendors.

(vendor names are withheld due to non disclosure agreement in effect)

APPLICATION NOTE 13


17/20

Conclusion

Wi-Fi is suited for data offload as echoed in AT&T and PCCWs business model. Today millions of subscribers are

already using WiFi as their primary source for data/internet access whether as part of their subscription plan or a free

service. As observed, WiFi has played a role in relieving congestion, but at the same time generating more usage.

The implementation of Dynamic Data Offloading via ANDSF can further enhance the both the 3G and WiFi experience.

Dynamic data offloading is necessary to minimize congestion. The earlier a congestion trigger is controlled and managed

the operator can continue to improve the distribution of network resources from the perspective of spectrum planning.

Since networks do not behave identically nor follow the same traffic model, data offloading exercise can facilitate

balancing the load whenever congestion occurs. Policy enforcement and policy management is mapped more

accurately with an overall knowledge of the network at any given point of time, rather than a silo representation at the

aggregation point at the backend. More and more operators are embracing data offloading as means to satisfy the

bandwidth requirements. With dynamic data offloading methodology, the operators can capitalize on extending its

network, while maintaining a balanced network investment.

APPLICATION NOTE 14


18/20

Offload Early, Connect Intelligently

Greenpacket welcomes you to embark on dynamic data offloading today with ANDSF for optimizing your network

operations. At Greenpacket, we understand the demands placed on Operators like you. Our solutions are designed to give

you the flexibility to constantly deliver cutting-edge offerings without exhausting your capital and operating expenditures.

With Greenpacket, limitless freedom begins now!

Free Consultation

If you would like a free consultation on how you can apply data offloading with ANDSF, feel free to contact us at

[email protected]. Kindly quote the reference code, SAP0611 when you contact us.

APPLICATION NOTE 15


19/20

References

1. The Cisco Visual Networking Index (VNI) Global Mobile Data Traffic Forecast Update 2011.

2. The Role of Adaptive Policy Control and Smart Caps in Managing Mobile Data Growth.

3. 3GPP TS 23.402 V8.0

3. Bearer-aware policy management and charging, Disruptive Analysis, Dean Bubley.

APPLICATION NOTE 16


20/20

About Green Packet

Greenpacket is the international arm of the Green Packet Berhad group of companies which is listed on the Main Board

of the Malaysian Bourse. Founded in San Franciscos Silicon Valley in 2000 and now headquartered in Kuala Lumpur,

Malaysia, Greenpacket has a presence in 9 countries and is continuously expanding to be near its customers and in

readiness for new markets.

We are a leading developer of Next Generation Mobile Broadband and Networking Solutions for Telecommunications

Operators across the globe. Our mission is to provide seamless and unified platforms for the delivery of user-centric

multimedia communications services regardless of the nature and availability of backbone infrastructures.

At Greenpacket, we pride ourselves on being constantly at the forefront of technology. Our leading carrier-grade

solutions and award-winning consumer devices help Telecommunications Operators open new avenues, meet new

demands, and enrich the lifestyles of their subscribers, while forging new relationships. We see a future of limitless

freedom in wireless communications and continuously commit to meeting the needs of our customers with leading

edge solutions.

With product development centers in USA, Shanghai, and Taiwan, we are on the cutting edge of new developments in

4G (particularly WiMAX and LTE), as well as in software advancement. Our leadership position in the Telco industry is

further enhanced by our strategic alliances with leading industry players.

Additionally, our award-winning WiMAX modems have successfully completed interoperability tests with major WiMAX

players and are being used by the worlds largest WiMAX Operators. We are also the leading carrier solutions provider

in APAC catering to both 4G and 3G networks.

For more information, visit: www.greenpacket.com.

San Francisco Kuala Lumpur Singapore Shanghai Taiwan Sydney Bahra in Bangkok Hong Kong

Associate

and sf green pack

Documents