android 2 2 upgrade user guide

7/27/2019 Android 2 2 Upgrade User Guide

1/16

Telstra T-Touch Tab Upgrade User Guide

2011-9-11 Huawei confidential Page 1, Total16

Telstra T-Touch Tab

Android 2.2 Upgrade User Guide

Huawei Technologies Co., Ltd.

All rights reserved

Copyright Huawei Technologies Co., Ltd. 2010. All rights reserved. No part of this document may be reproduced

or transmitted in any form or by any means without prior written consent of Huawei Technologies Co., Ltd. The product

described in this upgrade user guide may include copyrighted software of Huawei Technologies Co., Ltd. and possible

licensors. Customers shall not in any manner reproduce, distribute, modify, decompile, disassemble, decrypt, extract,

reverse engineer, lease, assign, or sublicense the said software, unless such restrictions are prohibited by applicable

laws or such actions are approved by respective copyright holders under licenses.


2/16


3/16



1 Prerequisites

1.1 Telstra T-Touch Tab with Android 2.1 (build number B021) and with a fully chargedbattery.

1.2 Personal Computer.

Minimum Hardware Requirements (PC):

Intel Pentium III or higher processor clock speed recommended

1GB of RAM or higher recommended

300 MB of available free hard disk space, and USB 2.0 is requiredXGA (1024 x 768) or higher-resolution video adapter and monitor recommended.

Supported Operating Systems:

Windows XP (SP2 & SP3)

Windows Vista (SP1)

Windows 7

1.3 Micro USB cable (connects Telstra T-Touch Tab with PC) - This cable was included in

Telstra T-Touch Tab Gift box.

1.4 MicroSD card (minimum free memory of 256Mb)

1.5 MicroSD card reader (Optional)

2 Warning and Back-Up Information

2.1 Please read carefully the warnings below before you upgrade your device. The upgrade

operation will set your device to factory settings, and will cause loss of the user data

including SMS, MMS, Contacts, and calendar which are stored in the device. The

applications previously downloaded from Android Market and installed by user will also

be lost.


4/16


5/16



3 Connecting the Telstra T-Touch Tab to your PC.

3.1 Power on your Telstra T-Touch Tab

and connect it to your PC with the USB cable.

3.2 Ignore or Cancel the following pop-up warnings on your PC.


6/16



3.3 On the Telstra T-Touch TabHome Screen page, click the icon on the upperright

corner.

3.4 Enter the Notifications and Tasks manager screen


7/16



3.5 Click the USB connected notification.After you click the USB connected notification, a

pop-up will be shown as such:

3.6 Click Mount in the dialog above to confirm that you want to transfer music, pictures, and

other files between yourdevices microSD card and the computer.

3.7 This operation will set the Telstra T-Touch Tabas a microSD card adapter.

3.8 Once you have completed the above sequence to set your Telstra T-Touch Tabas a

microSD adapter, your PC will then display a Removable Disk (the disk designated

letter will be assigned by your PC and may be different to that displayed below).

3.9 For extra security, copy all your songs, pictures, videos, contacts, etc from the microSD

card to your computer.


8/16


9/16



5.4 Copy the upgrade file to the microSD card of your Telstra T-Touch Tab.

(If you do have a separate microSD card reader, then please jump directly to Step 6.1)

5.5 Copy and paste the folder dload and its contents from your PC to the above removable

disk which now represents your connected Telstra T-Touch Tab


10/16



5.6 Ensure that the folderdload with UPDATA.APP file has been correctly copied to your

microSD card in the Telstra T-Touch Tab

5.7 Set the Telstra T-Touch Tab back to normal mode by turning off the microSD card

adapter.

5.8 On the Telstra T-Touch TabHome Screen page, click the icon on the upper right

corner.

5.9 Enter the Notifications and Tasks manager screen, and click the Turn off SD card

notification.


11/16



5.10 After you click the Turn off SD card notification, a pop-up window will be shown as such:

5.11 Click the Turn Off button to set the Telstra T-Touch Tabback to the normal mode.

5.12 Remove the USB cable that connects the Telstra T-Touch Tabto your PC.


12/16



6 Upgrade Process with Separate MicroSD Card Reader

Please follow the following instructions if you do have a separate microSD Card Reader, bypassingthe Telstra T-Touch Tabdevice altogether.

6.1 Insert microSD card into the adapter.

6.2 Connect the adapter to the PC USB port.

6.3 Copy and paste the upgrade folder from your PC to your microSD card adapter.


13/16



6.4 Make sure the dload folder with UPDATA.APP file has been correctly copied into the

microSD Card.


14/16


15/16



7.4 To ensure that all new systems configurations are adequately implemented into the

Telstra T-Touch Tab system, a second upgrade sequence must be performed.You will now need to REMOVE and REINSERT the battery (following the instructions in

your Getting Started Guide) as well as the main power, for the upgrade to continue on

the Telstra T-Touch Tab.

7.5 Repeat steps 1 and 2 once again. After successful completion of the upgrade process,

the screen will display OK as can be seen below.

7.6 REMOVE the microSD card, REMOVE and REINSERT the battery (following the

instructions in your Getting Started Guide) as well as the main power. Then press the

ON button and the Telstra T-Touch Tabwill start up for the first time after the upgrade.

The screen will flash several times, and when the initial start up animation is completed,the Telstra T-Touch Tab will finally restart automatically and enter the Screen

Calibration prompts.

7.7 Remove the DLOAD directory from your microSD card once the upgrade has been

successfully completed in your Telstra T-Touch Tab. This will stop any unwanted reload

of the upgrade software into your tablet.

Enjoy your newAndroid 2.2 .2 software.


16/16



8 Remarks

8.1 If the Telstra T-Touch Tab

does not start up, it would mean that the upgrade was notsuccessful or not complete .You would then need to perform the upgrade sequence of the

Telstra T-Touch Tabonce again.

9 Trademarks

, and Huawei are trademarks or registered Trademarks of Huawei Technologies Co., Ltd.

Other trademarks, product, service and company names mentioned are the property of their

respective owners.

Android is a trademark of Google Inc. Use of this trademark is subject to Google Permissions.

The Telstra T-Touch Tabis a registered trademark of Telstra Corporation Limited. ABN 33 051

775 556

android 2 2 upgrade user guide

Documents