ansys, inc. proprietary © 2004 ansys, inc. chapter 2 workbench v9.0
TRANSCRIPT
ANSYS, Inc. Proprietary© 2004 ANSYS, Inc.
Chapter 2
Workbench v9.0
Chapter 2
Workbench v9.0
ANSYS, Inc. Proprietary
© 2004 ANSYS, Inc.
October 1, 2004Inventory #002156
2-29.0 New Features
Overview
• Engineering Data
• Simulation
• DesignModeler
• Workbench SDK
ANSYS, Inc. Proprietary© 2004 ANSYS, Inc.
Engineering DataEngineering Data
ANSYS, Inc. Proprietary
© 2004 ANSYS, Inc.
October 1, 2004Inventory #002156
2-49.0 New Features
Engineering Data
• A place for engineering data that can be accessed by all Workbench modules
• Materials and Convections at 9.0 • Future
– Beam/Shell section libraries, functions for loads, spectra etc. in future
– Expansion to temperature dependent properties as well as various nonlinear material models
ANSYS, Inc. Proprietary
© 2004 ANSYS, Inc.
October 1, 2004Inventory #002156
2-59.0 New Features
Workbench Module
Container for project materials and convections
Thumbnails of properties curves, click to enter, click toolbar button to close
Individual properties grouped by physics
Engineering Data
ANSYS, Inc. Proprietary
© 2004 ANSYS, Inc.
October 1, 2004Inventory #002156
2-69.0 New Features
Engineering Data
Accessible from simulation toolbar or details of part body
Options for new, import, and edit
ANSYS, Inc. Proprietary
© 2004 ANSYS, Inc.
October 1, 2004Inventory #002156
2-79.0 New Features
Engineering Data
• Network Material Data Support
• Materials Can Be Imported From:– Default Material Types– User Defined Data
Sources– Central Network
Sources
ANSYS, Inc. Proprietary
© 2004 ANSYS, Inc.
October 1, 2004Inventory #002156
2-89.0 New Features
Engineering Data
• New Properties Can be Added to Materials– Tabular– Constants
ANSYS, Inc. Proprietary
© 2004 ANSYS, Inc.
October 1, 2004Inventory #002156
2-99.0 New Features
Integration to Commercial Data Suppliers
• Matereality serves ANSYS-ready inputs
• Kinematic Hardening (BKIN, MKIN/KINH)
• Isotropic Hardening (BISO, MISO)
• Viscoelastic (EVISC) • Creep (CREEP) • Hyperelastic (HYPER)• More…
• MATML (ANSYS v.9)• ANSYS input deck• CSV, Excel format• MATLAB (for curve fitting)
ANSYS, Inc. Proprietary© 2004 ANSYS, Inc.
SimulationSimulation
ANSYS, Inc. Proprietary
© 2004 ANSYS, Inc.
October 1, 2004Inventory #002156
2-119.0 New Features
Multiple Load Steps
• Environment specification as “Sequence”
• Specify the total number of steps in the details area.
ANSYS, Inc. Proprietary
© 2004 ANSYS, Inc.
October 1, 2004Inventory #002156
2-129.0 New Features
Multiple Load Steps
Step Controller
Edit Load Step
Definition
ANSYS, Inc. Proprietary
© 2004 ANSYS, Inc.
October 1, 2004Inventory #002156
2-139.0 New Features
Multiple Load Steps
Edit Load Step
Definition in Worksheet
View
ANSYS, Inc. Proprietary
© 2004 ANSYS, Inc.
October 1, 2004Inventory #002156
2-149.0 New Features
Multiple Load Steps
• Pretension loads:– Force– Locked– Displacement– Open
ANSYS, Inc. Proprietary
© 2004 ANSYS, Inc.
October 1, 2004Inventory #002156
2-159.0 New Features
Multiple Load Steps
Results defined and displayed by step number
ANSYS, Inc. Proprietary
© 2004 ANSYS, Inc.
October 1, 2004Inventory #002156
2-169.0 New Features
2D Simulation
• Plane Stress/Strain and Axisymmetry– Contact– Stress, Thermal, Modal, Harmonic, Shape– All existing loads
ANSYS, Inc. Proprietary
© 2004 ANSYS, Inc.
October 1, 2004Inventory #002156
2-179.0 New Features
Contact Enhancements
• Contact Reaction Output Can Be Requested In A Local Coordinate System
• Contact Worksheet Reactions Parameters
• Scoping By Named Selections For Contact Regions
ANSYS, Inc. Proprietary
© 2004 ANSYS, Inc.
October 1, 2004Inventory #002156
2-189.0 New Features
Contact Enhancements
• Penalty based “surface body /edge” contact that includes stiffness for rotational DOF
• Save/Load contact region settings• Reset to default options
ANSYS, Inc. Proprietary
© 2004 ANSYS, Inc.
October 1, 2004Inventory #002156
2-199.0 New Features
Contact Enhancements
• Explode / Merge contact pairs for same body pairs.
ANSYS, Inc. Proprietary
© 2004 ANSYS, Inc.
October 1, 2004Inventory #002156
2-209.0 New Features
Command Objects
• Can be inserted under Contact Regions and Bodies– Body: Allow specifying material
props not available in WB– Contact: Allows user to change
contact options not covered in native WB
• Contents are more independent of suppression and updates
ANSYS, Inc. Proprietary
© 2004 ANSYS, Inc.
October 1, 2004Inventory #002156
2-219.0 New Features
Command Objects
• Input arguments available:– Allows specifying ARG1
thru ARG9– Inputs can be
parameterized
• Can be renamed based on definition (renames to name of macro)
ANSYS, Inc. Proprietary
© 2004 ANSYS, Inc.
October 1, 2004Inventory #002156
2-229.0 New Features
Command Objects
• Output images using ANSYS commands can be included
ANSYS, Inc. Proprietary
© 2004 ANSYS, Inc.
October 1, 2004Inventory #002156
2-239.0 New Features
Remote Displacement
• Allows off-body:– Displacement application – Rotation centers
ANSYS, Inc. Proprietary
© 2004 ANSYS, Inc.
October 1, 2004Inventory #002156
2-249.0 New Features
Coordinate Systems
• Cylindrical coordinate system applicable to Forces
• Worksheet view to summarize all coordinate systems
• User can specify the coordinate system number in the ANSYS input file
ANSYS, Inc. Proprietary
© 2004 ANSYS, Inc.
October 1, 2004Inventory #002156
2-259.0 New Features
What Do These Features Mean?
• If you’re an ANSYS Mechancial user…
…you should be looking at Workbench
ANSYS, Inc. Proprietary
© 2004 ANSYS, Inc.
October 1, 2004Inventory #002156
2-269.0 New Features
Beam Stress Tool
• Scoping to line bodies specified at tool
• Calculates stresses:– Direct– Min/Max Bending– Min/Max Combined
ANSYS, Inc. Proprietary
© 2004 ANSYS, Inc.
October 1, 2004Inventory #002156
2-279.0 New Features
Arbitrary Pick Location
• Applicable to coordinate systems, remote force, and remote mass
ANSYS, Inc. Proprietary
© 2004 ANSYS, Inc.
October 1, 2004Inventory #002156
2-289.0 New Features
Miscellaneous
• Report the body on which the max and min of a result occurs on
• Allow Principal stress/strain and total deformation results in a harmonic analysis
• Direct creation of a Selection Group from selected bodies in the tree
ANSYS, Inc. Proprietary
© 2004 ANSYS, Inc.
October 1, 2004Inventory #002156
2-309.0 New Features
Material Nonlinearity Switch
• Specify Material Non-linearities Effects by Body– Structural: Ignores plasticity– Thermal: Ignores temperature
dependency– Emag: Ignores BH curve
ANSYS, Inc. Proprietary
© 2004 ANSYS, Inc.
October 1, 2004Inventory #002156
2-319.0 New Features
Vector Results Display
Options for vector arrows: scaling, size, grid, density, type
Proportional vectors
Uniform vectors
Length sizing
Grid aligned
Element aligned
Grid density
3D
Stick
ANSYS, Inc. Proprietary
© 2004 ANSYS, Inc.
October 1, 2004Inventory #002156
2-329.0 New Features
Vector Results Display
New
Previous
ANSYS, Inc. Proprietary
© 2004 ANSYS, Inc.
October 1, 2004Inventory #002156
2-339.0 New Features
Vector Results Display
ANSYS, Inc. Proprietary
© 2004 ANSYS, Inc.
October 1, 2004Inventory #002156
2-349.0 New Features
Error Results
• Stress• Thermal Flux
ANSYS, Inc. Proprietary
© 2004 ANSYS, Inc.
October 1, 2004Inventory #002156
2-359.0 New Features
Hex Dominant Mesher
• Include with ANSYS Structural Greater• Enhancements
– More Hex Elements– Less Pyramids
ANSYS, Inc. Proprietary
© 2004 ANSYS, Inc.
October 1, 2004Inventory #002156
2-369.0 New Features
CAD Plug-in Licensing
• CAD Interface Licenses will be released when the data import process in complete.
ANSYS, Inc. Proprietary© 2004 ANSYS, Inc.
DesignModelerDesignModeler
ANSYS, Inc. Proprietary
© 2004 ANSYS, Inc.
October 1, 2004Inventory #002156
2-389.0 New Features
DesignModeler Overview
• New features in DM 9.0– 3D Curve Feature– Planar Bodies– Named Selection Base Object Support– BladeGen and STEP Imports– Winding Editor– Pattern Feature– Parameter Manager Functions
ANSYS, Inc. Proprietary
© 2004 ANSYS, Inc.
October 1, 2004Inventory #002156
2-399.0 New Features
3D Curve Feature
• Create 3D Curves from:– Model points– Coordinates File
• Curves may be either open or closed.
Open Curve Closed Curve
ANSYS, Inc. Proprietary
© 2004 ANSYS, Inc.
October 1, 2004Inventory #002156
2-409.0 New Features
Planar Bodies
• Planar Bodies Are Surface Bodies In The XY-plane. • Planar Bodies Created In DesignModeler Are Used To
Perform 2D Analysis In Workbench Simulation.
Solid Planer
ANSYS, Inc. Proprietary
© 2004 ANSYS, Inc.
October 1, 2004Inventory #002156
2-419.0 New Features
Named Selection Base Objects
• Named Selections Can Be Used As Base Objects For Basic Modeling Features.
• The Named Selection May Contain Either Bodies, Faces, Edges, Or Points.
ANSYS, Inc. Proprietary
© 2004 ANSYS, Inc.
October 1, 2004Inventory #002156
2-429.0 New Features
BladeGen Import
• CFX BladeGen (.bgd) files can be imported into DesignModeler.
• Imports the flow path around the blade
ANSYS, Inc. Proprietary
© 2004 ANSYS, Inc.
October 1, 2004Inventory #002156
2-439.0 New Features
Pattern Feature
• Pattern feature creates linear, circular, and rectangular patterns of face sets and bodies.
Linear Circular Rectangular
ANSYS, Inc. Proprietary
© 2004 ANSYS, Inc.
October 1, 2004Inventory #002156
2-449.0 New Features
Parameter Manager Functions
• New Parameter Manager operations are supported in DesignModeler 9.0:
Trigonometric functions: sin(x), cos(x), tan(x),
asin(x), acos(x), atan(x)
Exponentiation: x^y Absolute value: abs(x)
Modulus: x % y Square root: sqrt(x)
Natural log: ln(x) Exponential ex: exp(x)
ANSYS, Inc. Proprietary© 2004 ANSYS, Inc.
ANSYS Workbench SDKANSYS Workbench SDK
ANSYS, Inc. Proprietary
© 2004 ANSYS, Inc.
October 1, 2004Inventory #002156
2-469.0 New Features
Multi-tiered Customization Tools
• Creation or integration of compiled applications
1. The Simulation Wizard• Process Automation and Control
2. Scripting Interfaces• Process Automation
• Workbench Customization and Feature Addition
3. The Workbench Applet Generator• Vertical Applications and Feature Additions
ANSYS, Inc. Proprietary
© 2004 ANSYS, Inc.
October 1, 2004Inventory #002156
2-479.0 New Features
UI Integration
• Custom Wizard Editor
ANSYS, Inc. Proprietary
© 2004 ANSYS, Inc.
October 1, 2004Inventory #002156
2-489.0 New Features
Advanced Engineering Environment
• Officially Released API Documentation at v9.0• Stable Inter-version API Layer
ANSYS, Inc. Proprietary
© 2004 ANSYS, Inc.
October 1, 2004Inventory #002156
2-499.0 New Features
The Workbench Applet Generator
• Upgrades
• The Applet Generator is:
– A Microsoft Visual Studio integrated Wizard (developed and shipped by ANSYS)
– It produces executable Applets using pre-built Workbench Source Code Templates
– It automates Applet
• Installation and registration
• GUI creation including callback functions
ANSYS, Inc. Proprietary
© 2004 ANSYS, Inc.
October 1, 2004Inventory #002156
2-509.0 New Features
Starting a Visual Studio –New Project
ANSYS, Inc. Proprietary
© 2004 ANSYS, Inc.
October 1, 2004Inventory #002156
2-519.0 New Features
3rd Party Integration Example
Excel Based Product – Application Framework
Integration Framework Required to Eliminate Redundant Development
Parameters Applicable For Other Applications
ANSYS, Inc. Proprietary
© 2004 ANSYS, Inc.
October 1, 2004Inventory #002156
2-529.0 New Features
3rd Party Integration Example
ANSYS, Inc. Proprietary
© 2004 ANSYS, Inc.
October 1, 2004Inventory #002156
2-539.0 New Features
3rd Party Integration Example
C++ Based Product
Migrate Interface to Workbench
Utilize Workbench to Build Vertical Industry Applications