anzor architectural tension rod systems

DIVIDER INSERT hERE:

Tension Rod Systems

tension rod systems

tensio

n ro

dsystem

s

79Online catalogue: www.anzor.co.nz/arch

TENSION ROD SySTEMS

TENSION ROD SySTEMS

ROD DyNAMIc `hIDDEN ThREAD’ - STAINLESS STEEL

p2h ADJUSTER & ROD - STAINLESS STEEL

SRS-560 hIGh TENSILE ADJUSTER & hIGh TENSILE ROD - STAINLESS STEEL

pAGE 85

pAGE 78

pAGE 87

Information used exclusively under permission of Strudyna Co. Ltd

cOUpLING pLATES - STAINLESS STEEL pAGE 83

Online catalogue: www.anzor.co.nz/tension-rod

FORK + ROD TENSION SySTEM - GALVANIzED pAGE 89

This is our standard stainless steel Tension Rod System.

80

ROD DyNAMIc `hIDDEN ThREADS’

BNZ Tower - WellingtonInternal Rod Supports for BridgesContractor: Thermosash Commercial Ltd

Subway - Lunn Ave, Auckland Rod Bracing CanopyContractor: J & R Slecht Ltd

New Lynn Railway Station - AucklandInternal Structure Support

Contractor: Grayson Engineering Ltd


Sovereign House - Smales Farm, Auckland Rod Bracing for Sun ScreenContractor: Thermosash Commercial Ltd



ROD DyNAMIc `hIDDEN ThREAD’STAINLESS STEEL TIE RODS

Locking nut covers threadsADJUSTABLE EYE (LH)

SPANNER FLATS

ROD JOINER

ADJUSTABLE FORK - (RH)

ADJUSTABLE FORK (LH)

ADJUSTABLE EYE (RH)

FEATURES & BENEFITS

• Attractive look as the threads are hidden by the locking nut.

• Exposed threads can commonly trap corrosive agents (e.g. salt) and therefore tea-stain more

easily. By covering the threads it removes this risk and enhances the long-term appearance.

• Fork and Eye terminals are made from 316 Stainless Steel which is then passivated for

enhanced corrosion resistance. These are made by the highly reputable manufacturer of

structural stainless steel components `Structural Dynamics’.

• Fork and Eye terminals each have a laser engraved code for traceability from raw material.

• The Tie Rods are 316 Stainless Steel.

• UNF threads allow for more precise adjustment.

• Fully tested with Tensile & Yield loads available.

Why SpEcIFy?

• We have excellent stock levels of all fittings in New Zealand, so our delivery is quick.

• Rod length is customised to the job - machined locally to order with a short delivery time.

• Competitively priced.

• We are proven in New Zealand, and are the preferred supplier to many structural steel

companies, having supplied many projects nationwide.

Adjust by turning the extended tension rod and joiner as one single unit.

Rh

Lh

Rh

Lh

Adjust by turning the rod only.



EX-STOcK SUBJEcT TO pRIOR

SALE

82


ADJUSTABLE FORKS - LEFT (S912L) & RIGhT hAND (S912R)

Rod made to order up to approx. 6m. Please supply the pin-to-pin measurement.

ROD LENGThS

EX-STOcK

SUBJEcT

TO pRIOR

SALE


D

M

A

B

L

MProduct Code: ASDS912

We recommend applying Loctite 243 to the pin, washer & screw set for permanent fixture.

LOcTITE 243

LARGE QTy

TO ORDER

Delivery approx

2 months

SMALL QTy

TO ORDER

Delivery approx

2-3 weeks

Size M UNF

A (mm)

B (mm)

ØD (mm)

L (mm)

Adjustment (+/-)

yield Load* (kN)

Tensile Load (kN)

1/4” UNF 7 11 6.4 68.5 15mm 7.0 14.6

5/16” UNF 8.5 13.2 7.9 80 16mm 11.6 23.3

3/8” UNF 10 18 9.5 97 19mm 12.9 30.6

1/2” UNF 14 24 12.7 137 30mm 24.6 58.2

5/8” UNF 18 30 16 170 35mm 33.8 85.0

3/4” UNF 22 38 19 212 45mm 49.4 124.1

7/8” UNF 24 45 22 244 50mm 67.2 168.9

1” UNF 26 50 25.5 282 60mm 87.7 220.4

1-1/4” UNF 32 64 31.8 330 65mm 141.9 356.4

Size M Metric

A (mm)

B (mm)

ØD (mm)

L (mm)

Adjustment (+/-)

yield Load* (kN)

Tensile Load(kN)

M27x3.0 28 50 27 264.9 54mm 120.0 236.0

M30x3.5 30 55 30 294.2 60mm 147.0 288.0

M33x3.5 32 60 33 321.6 66mm 181.0 357.0

M36x4.0 34 65 36 350 72mm 214.0 420.0

M39x4.0 36 70 39 378 78mm 255.0 502.0

M42x4.5 39 75 42 408 84mm 293.0 577.0

M45x4.5 42 78 45 432.7 90mm 342.0 672.0

M48x5.0 45 82 48 460 96mm 385.0 758.0

M52x5.0 49 88 52 498.1 104mm 460.0 905.0

M56x5.5 52 92 56 530.9 112mm 531.0 1,045.0


*Standard safety factor for structural tensile application is 60% of yield load. Also see your obligations regarding Safe Working Loads on p.105. NB: never use rod for lifting purposes.

ThREADS MUST BE LUBRIcATED WITh NIcKEL ANTI SEIzE TO AVOID GALLING.

83

Size A (mm)

B (mm)

ØD (mm)

L (mm)

Adjustment (+/-)

yield Load* (kN)

Tensile Load (kN)

1/4” UNF 6 11 6.7 68.5 15mm 7.0 14.6

5/16” UNF 8 13.2 8.3 80 16mm 11.6 23.3

3/8” UNF 9 18 9.8 97 19mm 12.9 30.6

1/2” UNF 12 24 13 137 30mm 24.6 58.2

5/8” UNF 16 30 16.2 170 35mm 33.8 85.0

3/4” UNF 20 38 19.5 212 45mm 49.4 124.1

7/8” UNF 22 45 22.5 244 50mm 67.2 168.9

1” UNF 24 53 25.7 282 60mm 87.7 220.4

1-1/4” UNF 30 66 32 330 65mm 141.9 356.4


ADJUSTABLE EyES - LEFT (S911L) & RIGhT hAND (S911R)

B

D

A

L


RDS curtain wall joiner with fixed articulationRDS curtain wall joiner with movable articulation RDS curtain wall joiner with fixed articulationRDS curtain wall joiner with movable articulationRDS curtain wall joiner with movable articulation RDS curtain wall joiner with fixed articulation

ALSO AVAILABLE

Product Code: ASDS911



For installation guide and technical specificationsplease contact us or visit www.anzor.co.nz/arch/tension-rod

Rod made to order up to approx. 6m. Please supply the pin-to-pin measurement.

ROD LENGThSThREADS MUST BE LUBRIcATED WITh NIcKEL ANTI SEIzE TO AVOID GALLING.


SALE

84

pIN, WAShER & ScREW DIMENIONS

Size (M) D L

1/4” UNF Ø6.4 14mm

5/16” UNF Ø7.9 17.5mm

3/8” UNF Ø9.5 19.5mm

1/2” UNF Ø12.7 26.4mm

5/8” UNF Ø16 34.5mm

3/4” UNF Ø19 41.5mm

7/8” UNF Ø22 46.5mm

1” UNF Ø25.5 54.5mm

1-1/4” UNF Ø31.8 65mm

ROD JOINER to connect rods for lengths beyond 6 metres


LOcTITE 243


Size ØD1 (mm)

ØD2 (mm)

ØD3 (mm)

ØT1 (mm)

ØT2 (mm)

1/4” 9.0 7.0 14 4.5 6.5

5/16” 10.5 8.5 16 6.0 8.0

3/8” 12.0 10.0 18 7.5 9.5

1/2” 15.5 13.5 25 11.5 13.5

5/8” 20.5 16.5 32 15.0 17.0

3/4” 23.5 19.5 36 19.0 21.0

7/8” 27.0 23.0 45 19.0 23.0

1” 30.5 26.5 50 21.0 25.0

1.1/4” 37.0 33.0 60 27.0 31.0

ISOLATING WAShERTo be used to separate dissimilar metals such as when attaching

a stainless steel adjustable fork to a mild steel galvanized bracket. Thereby avoiding galvanic corrosion between dissimilar metals.

D3

D2

T1

T2

D1

D

L

M

L




SALE


SALE

Size (M)

L (mm)

1/4” UNF 24

5/16” UNF 32

3/8” UNF 38

1/2” UNF 50

5/8” UNF 60

3/4” UNF 72

7/8” UNF 83

1” UNF 90

1-1/4” UNF 112


ROD DyNAMIc TIE BAcK pLATES - 316 STAINLESS STEEL

ScA1

ScB1 - Bolt Anchor Designed for J Bolts directly onto steel beam.

Angles available ex-stock: 60° Available to order:

45,50,55,65,70,75,80,85,90°

Size ØD(mm)

h(mm)

L(mm)

L1(mm)

T(mm)

1/4” 9.5 18 20-60 11 5

5/16” 11.0 21 25-75 13 6

3/8” 12.5 24 30-70 16 8

1/2” 16.5 33 40-100 22 10

5/8” 21.0 45 50-110 28 14

3/4” 24.0 45 60-120 35 18

7/8” 28.0 70 60-140 38 19

1” 31.5 90 75-155 45 20

1-1/4” 38.0 105 85-185 55 25

Scc1- chemical Bolt Anchor Designed for chemical anchors directly onto cement.

Angles available ex-stock: 45°

ScD1 - chemical Bolt Anchor Designed for chemical anchors directly onto concrete.

Angles available ex-stock: 90° Available to order:

30,40,45,50,55,60,65,70,75

For full dimensions, please contact us or visitwww.anzor.co.nz/arch

Product code: ASDCPC1Product code: ASDCPD1Product code: ASDCPB1

Always install rods and brackets in line.

Welding coupling plates.SCA1 are designed to becut and welded on site.

Welded Application

cOUpLING pLATES

AVAILABLE

TO ORDER

Delivery approx

2 weeks



NB: Breaking Loads for SCB1, SCD1 & SCC1 are indicative of coupling’s plate tensile performance against rod assemblies, and not the anchoring strength of bolts against wall/floor.


SALE


SALE


SALE

86

For cross Bracing

ScF1

Angles available: 40,45,50,55,60,65,70,75,80,85,90

ScG1

Angles available: 120°

cOUpLING pLATES - 316 STAINLESS STEEL

Size ØD(mm)

ØD1(mm)

T(mm)

1/4” 65 6.7 6

5/16” 80 8.2 6

3/8” 90 9.8 8

1/2” 115 13.3 12

5/8” 140 16.5 16

3/4” 170 20.0 19

7/8” 190 23.0 22

1” 220 26.0 22

1-1/4” 260 33.0 30

Copyright © 2011 Strudyna

40° 45° 50° 55° 60°

65° 70° 75° 80° 85°

90°

T

D1

D

40°

D1

D

45°

D1

D

50°

D1

D

60°

D1

D65°

D1

D

80°

D1

D

85°

D1

D

55°

D1

D

70°

D1

D

75°

D1

D

T120°

120°

D1

D90°

T

D1

D

40°

D1

D

45°

D1

D

50°

D1

D

60°

D1

D

65°

D1

D

80°

D1

D

85°

D1

D

55°D1

D

70°

D1

D

75°

D1

D

T120°

120°

D1

D

90°

90°

T

D1

D

40°

D1

D

45°

D1

D

50°

D1

D

60°

D1

D

65°

D1

D

80°

D1

D85°

D1

D

55°

D1

D

70°

D1

D

75°

D1

D

T120°

120°

D1

D

90°

T

D1

D

40°

D1

D

45°

D1

D

50°

D1

D

60°

D1

D

65°

D1

D

80°

D1

D

85°

D1

D

55°

D1

D

70°

D1

D

75°

D1

D

T120°

120°

D1

D

90°

T

D1

D

40°

D1

D45°

D1

D

50°

D1

D

60°

D1

D

65°

D1

D

80°

D1

D

85°

D1

D

55°

D1

D

70°

D1

D75°

D1

D

T120°

120°

D1

D

cOUpLING pLATES

AVAILABLE

TO ORDER

Delivery approx

2 weeks



Size ØD(mm)

ØD1(mm)

T(mm)

1/4” 65 6.7 6

5/16” 80 8.2 6

3/8” 90 9.8 8

1/2” 115 13.3 12

5/8” 140 16.5 16

3/4” 170 20.0 19

7/8” 190 23.0 22

1” 220 26.0 22

1-1/4” 260 33.0 30

87Online catalogue: www.anzor.co.nz/tension-rod

A `hIGh END’ ARchITEcTURALLy DESIGNED

ROD ADJUSTER.

• A high quality tensioning unit for rod (and cable – see p.101).

• Designed for performance and also aesthetic appeal.

• Due to its unique internal adjustment system, it can be adjusted individually by turning just one adjuster end, without having to turn the entire rod.

• The double locking nut system offers good security to counter external dynamic and resonance forces.

• Threads are hidden for enhanced aesthetic appeal.

p2h ADJUSTER - ARchITEcTURALLy DESIGNED STAINLESS STEEL TERMINALS FOR TIE RODS

AVAILABLE

TO ORDER

Delivery approx

4 months

p2h Adjuster Technical Features• Rod diameter: Metric M16 – M56.

• Made from passivated 316 Stainless

Steel for enhanced corrosion resistance.

• Finish: Matt

• Installation - special P2H tools required.

PIN

P2H - Fork

Lock Nut for Ex-socket

Lock Nut forIn-Socket

Copyright © 2011 Strudyna Information used exclusively under permission of Strudyna Co. Ltd

p2h ADJUSTER

ThREADS MUST BE LUBRIcATED WITh NIcKEL ANTI SEIzE TO pREVENT GALLING

Adjust by turning the “In-Socket” only.

Rh

88

p2h ADJUSTER - performance data

Rod Size (Ø)

A(mm)

ØD(mm)

Adjustment+/-

yield Load* (kN)

Tensile Load(kN)

M16 18 16 40mm 40 80

M20 20 20 40mm 67 132

M22 20 22 40mm 79 163

M24 21 24 56mm 100 197

M27 24 27 56mm 126 254

M33 30 33 60mm 199 391

M42 34 42 64mm 314 620

M45 40 45 64mm 365 718

M52 40 52 70mm 485 978

M56 48 56 80mm 514 1,143

p2h precautions

• Always select the correct rod system based on load requirements.

• Do not overload the rod above its designed safe working load.

• Always use the P2H Adjuster in line with its anchoring point.

• Never use the P2H adjuster for lifting purposes.

For installation guide, tools and technical specificationsplease contact one of our architectural product managers

or visit www.anzor.co.nz/arch/p2h


LOcTITE 243

p2h ADJUSTER

P2H (Fork) P2H (Fork)

ØD

A

Pin-to-Pin Middle adjustment



ThREADS MUST BE LUBRIcATED WITh NIcKEL ANTI SEIzETO pREVENT GALLING



FEATURES

• High tensile Stainless Steel Rod Tension System.


• Threads are hidden for enhanced aesthetic appeal.

• Full traceability - rods and tensioners each come with laser engraved codes.

SRS Technical Features

• Rod Diameter: Metric M16 – M100.

• Fork Material: Cast 2205 Duplex Stainless Steel

• Rod Material: 560HTR Grade High Tensile Stainless Steel

• Lock Nut Material: Cast AISI316

• pin Material: Rod 17-4 PH Stainless Steel

• Surface Treatment: M16 – M45 Matte finish

M56 – M100 Gloss finish

Copyright © 2011 Strudyna

SRS - hIGh TENSILE STAINLESS ROD

SRS Fork

Adjust by turning the rod only.

Rh

Lh

SRS-560hTR - hIGh TENSILESTAINLESS STEEL ROD SySTEM



ThREADS MUST BE LUBRIcATED WITh NIcKEL ANTI SEIzETO pREVENT GALLING

AVAILABLE

TO ORDER

Delivery approx

4 months

90

SRS pERFORMANcE DATA

Rod Size (Ø)

A(mm)

ØD(mm)

Adjustment+/-

yield Load* (kN)

Tensile Load (kN)

M16 16 16 32mm 109 137

M20 20 20 40mm 171 214

M22 22 22 44mm 169 243

M24 24 25 48mm 197 283

M30 26 30 46mm 288 364

M33 30 33 50mm 357 451

M36 34 36 54mm 420 531

M39 36 39 60mm 502 634

M42 40 42 64mm 577 728

M45 42 45 68mm 672 848

M48 45 48 72mm 758 957

M52 50 52 78mm 905 1,142

M56 50 56 84mm 933 1,258

M60 55 30 70mm 1,086 1,464

M64 56 34 60mm 1,231 1,659

M68 61 68 60mm 1,405 1,894

M72 66 72 60mm 1,593 2,147

M76 72 76 50mm 1,788 2,411

M80 72 80 50mm 1,998 2,693

M85 76 85 50mm 2,275 3,067

M90 82 90 50mm 2,571 3,465

M100 88 100 50mm 3,220 4,340

*Design load: standard safety factor for structural tensile application is 60% of yield load. Also see your obligations regarding Safe Working Loads on p.105.

NB: never use rod for lifting purposes.

Pin to PinMiddle adjustment

min max

RDS curtain wall joiner with fixed articulationRDS curtain wall joiner with movable articulationRDS curtain wall joiner with fixed articulationRDS curtain wall joiner with movable articulation

RDS curtain wall joiner with fixed articulationRDS curtain wall joiner with movable articulation

AVAILABLE

TO ORDER

Delivery approx

4 months

SRS 560HTR with 4 way connector plate.

SRS 560HTR with a perpendicular T-Joiner.SRS 560HTR with 3 way connector plate.

SRS - hIGh TENSILE STAINLESS ROD

AccESSORIES

ØD

A


560HTR RodSRS (fork)SRS (fork)

Ø Rod



91

Rod Size (Ø)

A(mm)

ØD(mm)

Adjustment+/- (mm)

yield Load (kN)

M10 10 10 14 26.3

M12 12 11 12 38.3

M16 15 15 23 71.2

M20 18 17 29 111.0

M24 23 23 35 160.0

M27 23 25 40 208.0

M30 28 29 43 254.0

M36 28 33 52 371.0

M42 33 37 61 509.0

M48 38 41 68 669.0

M52 43 46 75 798.0

M56 43 51 82 922.0

M60 48 56 85 1,073.0

M64 53 56 89 1,215.0

M70 58 61 101 1,463.0

M80 68 71 116 1,910.0

M90 78 80 128 2,418.0

M100 83 90 141 2,985.0

ØD


Galv Fork

For full technical specifications & installation guide please contact one of our architectural product managers.

Galv Fork

Ø Rod

A

• Produced by a high quality European manufacturer.

• Supplied to thousands of projects worldwide.


• An economical, high quality choice for your next rod tensioning project.

GALVANIzED ROD SySTEM

yield Stress of 460 N/mm2 equal to 460 Mpa

Rod Joiner (sold separately)

Galv Rod

GALVANIzED FORK + ROD TENSION SySTEM

Fork size M24 and smaller and a quantity of up to 10 rods.Delivery approx 10 working days

SMALL ORDERS

Size and qty on application.

Please contact us for estimated delivery times.

LARGE ORDERS

ROD JOINERS

Available on request. (sold separately)

AVAILABLE TO ORDERDELIVERy TIMES:

NB: illustrations are not an exact representation of the product.Please contact us for technical drawings.

ØD = the hole diameter in the fork that accommodates the clevis pin

Locking Nut


anzor architectural tension rod systems

Documents

rod length

extended tension rod

unf threads

hidden threadsrod dynamic

structural steel companies

eye terminals

permission of strudyna

prior sale82rod dynamic