ao+ ampoule opener.ih.modififed
TRANSCRIPT
① AO+ is injury-free ampoule opener system consisting of:a) Stable, flat base with single or multi-port functionality.
Optional needle holder systemb) Opener unit
② Compatibility: AO+ can be manufactured to suit any size & type of ampoule on the world market. Test models, are3 D printed.Any new model of AO+ can be made cost effectively within 72 hours after receiving complete specification or samples of your ampoules.
c. Customization: AO+ can be made in single base, double, triple or more if required. Different
sizes can also be combined on one base.
④ Sterilization & Reuse:AO+ in 3DP model cannot be sterilzed. Full Production models can be sterilized.AO+ is fully reusable device that can safely and effectively open ampoules,
hundreds of times before requiring replacement.
⑤Packaging:Type, dependant on quantity.
1 & 2ml openers together in one base with needle holders
⑥ AO+ is also available with a needle holder system to prevent needle stick injuries.
1. Place ampoule into an
OPENING POST on the BASE.
2. Align KEYWAYS and lower
OPENER over the ampoule.
3. Once the OPENER is nearly touching
the BASE, apply slight pressure on the
top of the OPENER until you hear the
ampoule neck snap.
4. Remove the OPENER vertically.
5. Withdrawal thecontent of the ampoule. Safely and without risk.
Available in any language as per customers requirement.
INNOVATION HUBWeb: theampouleopener.com
email: [email protected]: +1-802-735-2557