api standards for safe offshore operations
TRANSCRIPT
In-Service Inspection of Mooring Hardware for Floating StructuresRecommended Practice for Planning, Designing and Constructing Heliports for Fixed Offshore PlatformsDeprivation of Metocean Design and Operating Conditions
Marine Operations
Specification for Carbon Manganese Steel Plate with Improved Toughness for Offshore StructuresRolled Shapes with Improved Notch Toughness Recommended Practice for Planning, Designing, and Constructing Structures and Pipelines for Arctic ConditionsDynamic Risers for Floating Production SystemsDesign of Windlass Wildcats for Floating Offshore StructuresManufacture of Structural Steel Castings for Primary Offshore ApplicationsManufacture of Structural Steel Forgings for Primary Offshore ApplicationsStructural Integrity Management of Fixed Offshore StructuresPlanning, Designing and Constructing Tension Leg PlatformsGuidelines for Tie-Downs on Offshore Production Facilities for Hurricane SeasonBulletin on Stability Design of Cylindrical ShellsDesign of Flat Plate StructuresSpecification for Steel Plates for Offshore Structures, Produced by Thermo-Mechanical Control Processing (TMCP)Recommended Practice for Ultrasonic and Magnetic Examination of Offshore Structural Fabrication and Guidelines for Qualification of Technicians
RP 2IRP 2L
RP 2MET/ISO 19901-1:2006RP 2MOP/ISO 19901-6:2009 SPEC 2MT1
SPEC 2MT2RP 2N
STD 2RDBULL 2SSPEC 2SCSPEC 2SFRP 2SIMRP 2T BULL 2TDBULL 2UBULL 2VSPEC 2W
RP 2X
Specification for Drill-Through Equipment
Specification for Choke and Kill EquipmentSpecification for Control Systems for Drilling Well Control Equipment and Control Systems for Diverter EquipmentSpecification for Marine Drilling Riser EquipmentRecommended Practice for Design, Selection, Operation and Maintenance of Marine Drilling Riser Systems Specification for Marine Drilling Riser Couplings
Specification for Drill Through Equipment—Rotating Control DevicesCoiled Tubing Well Control Equipment SystemsBlowout Prevention Equipment Systems for Drilling WellsRecommended Practice for Well Control OperationsRecommended Practice for Diverter Systems Equipment and Operations
Recommended Practice for Oil and Gas Well Servicing and Workover Operations Involving Hydrogen SulfideAnnular Casing Pressure Management for Offshore WellsUnderbalanced Drilling OperationsDeepwater Well Design and ConstructionWell Construction Interface Document Guidelines
SPEC 16A/ISO 13533:2001SPEC 16C SPEC 16D
SPEC 16F RP 16Q
SPEC 16R
SPEC 16RCD
RP 16ST STD 53RP 59RP 64
RP 68
RP 90RP 92URP 96BULL 97
Planning, Designing, and Constructing Fixed Offshore Platforms—Working Stress Design Specification for the Fabrication of Structural Steel Pipe Offshore Pedestal-Mounted CranesOperation and Maintenance of Offshore Cranes Seismic Design Procedures and Criteria for Offshore Structures
Specification for Mooring ChainRecommended Practice for Design of Offshore Facilities Against Fire and Blast Loading Geotechnical and Foundation Design ConsiderationsSpecification for Carbon Manganese Steel Plate for Offshore StructuresGuidance for Post-Hurricane Structural Inspection of Offshore Structures
RP 2A-WSD
SPEC 2B
SPEC 2CRP 2D
RP 2EQ/ISO 19901-2:2004*
SPEC 2F
RP 2FB
RP 2GEO/ISO 19901-4:2003SPEC 2H
BULL 2HINS
BULL 91
RP T-1
RP T-2
RP T-4
RP T-6
RP T-7
SPEC Q1
SPEC Q2
RP 75
Planning and Conducting Surface Preparation and Coating Operations for Oil and Natural Gas Drilling and Production Facilities in a Marine EnvironmentOrientation Programs for Personnel Going Offshore for the First TimeRecommended Practice for Qualification Programs for Offshore Production Personnel Who Work with Safety DevicesTraining of Offshore Personnel in Nonoperating EmergenciesRecommended Practice for Training and Qualification of Personnel in Well Control Equipment and Techniques for Wireline Operations on Offshore LocationsTraining of Personnel in Rescue of Person in Water
Specification for Quality Management System Requirements for Manufacturing Organizations for the Petroleum and Natural Gas IndustrySpecification for Quality Management System Requirements for Service Supply Organizations for the Petroleum and Natural Gas Industries
Recommended Practice for Development of a Safety and Environmental Management Program for Offshore Operations and Facilities
Evaluation Standard for Internal Pressure Sheath Polymers for High Temperature Flexible Pipes The Aging of PA-11 In Flexible PipesAn Evaluation of the Risks and Benefits of Penetrations in Subsea Wellheads Below the BOP Stack
Subsea Equipment Pressure RatingsAvoidance of Blockages in Subsea Production Control and Chemical Injection SystemsAttributes of Production Chemicals in Subsea Production SystemsHigh-pressure High-temperature Design Guidelines
Recommended Practice for Cementing Shallow Water Flow Zones in Deepwater Wells
Standard on Isolating Potential Flow Zones During Well ConstructionSecurity for Offshore oil and Natural Gas OperationsSecurity for Worldwide Offshore Oil and Natural Gas OperationsSpecification for Wellhead and Christmas Tree Equipment
Specification for Drilling and Well Servicing StructuresSpecification for Drilling and Well Servicing Equipment
TR 17TR1
TR 17TR2TR 17TR3
TR 17TR4TR 17TR5
TR 17TR6
TR 17TR8RP 65
ST 65-2
RP 70RP 70ISPEC 6A/ISO 10423: 2009SPEC 4FSPEC 7K
API Standards for Safe Offshore OperationsSpecification for Steel Plates, Quenched-and-Tempered, for Offshore StructuresRecommendation Practice for Preproduction Qualification for Steel Plates for Offshore StructuresGulf of Mexico Jackup Operations for Hurricane SeasonSpecification for Subsurface Safety Valve EquipmentDesign, Installation, Repair and Operation of Subsurface Safety Valve Systems Recommended Practice for Analysis, Design, Installation, and Testing of Basic Surface Safety Systems for Offshore Production Platforms Recommended Practice for Design and Installation of Offshore Production Platform Piping SystemsDesign, Installation, and Maintenance of Electrical Systems for Fixed and Floating Offshore Petroleum Facilities for Unclassified and Class I, Division 1, and Division 2 LocationsRecommended Practice for Design, Installation, and Maintenance of Electrical Systems for Fixed and Floating Offshore Petroleum Facilities for Unclassified and Class I, Zone 0, Zone 1, and Zone 2 LocationsRecommended Practice for Fire Prevention and Control on Fixed Open-Type Offshore Production PlatformsRecommended Practice for Design and Hazards Analysis for Offshore Production FacilitiesSpecification for Lock Mandrels and Landing Nipples
SPEC 2Y
RP 2Z
RP 95JSPEC 14ARP 14B/ISO 10417:2004RP 14C
RP 14E
RP 14F
RP 14FZ
RP 14G
RP 14J
SPEC 14L/ISO 16070:2005
RP 2SK
RP 2SM
TR 1PER15K-1
SPEC 6DSS/ISO 14723:2009RP 17A/ISO 13628-1:2005RP 17BRP 17C/ISO 13628-3:2000SPEC 17D/13628-4 2010SPEC 17E/ISO 13628-5:2009SPEC 17F
Design and Analysis of Stationkeeping Systems for Floating StructuresDesign, Manufacture, Installation, and Maintenance of Synthetic Fiber Ropes for Offshore Mooring
Protocol for Verification and Validation of High-Pressure High-Temperature Equipment
Specification for Subsea Pipeline Valves
Design and Operation of Subsea Production Systems—General Requirements and Recommendations
Recommended Practice for Flexible PipeRecommended Practice on TFL (Through Flowline) Systems
Design and Operation of Subsea Production Systems—Subsea Wellhead and Tree Equipment
Specification for Subsea Umbilicals
Standard for Subsea Production Control Systems
RP 17G/ISO 13628-7:2005RP 17H
SPEC 17JSPEC 17K/ISO 13628-10:2005SPEC 17L1RP 17L2
RP 17N
RP 170
RP17P/ISO 13628-1:2005RP17Q
RP17R
RP 17U
RP17V
RP17W
Recommended Practice for Completion/Workover Riser
Remotely Operated Tools and Interfaces on Subsea Production Systems
Specification for Unbonded Flexible PipeSpecification for Bonded Flexible Pipe
Specification for Flexible Pipe Ancillary EquipmentRecommended Practice for Flexible Pipe Ancillary EquipmentRecommended Practice for Subsea Production System Reliability and Technical Risk ManagementRecommended Practice for Subsea High Integrity Pressure Protection Systems (HIPPS)Design and Operation of Subsea Production Systems—Subsea Structures and ManifoldsSubsea Equipment Qualification—Standardized Process for DocumentationRecommended Practice for Flowline Connectors and JumpersWet and Dry Thermal Insulation of Subsea Flowlines and EquipmentRecommended Practice for Analysis, Design, Installation, and Testing of Safety Systems for Subsea ApplicationsRecommended Practice for Subsea Capping Stacks
RP 98
RP 2FPS
Personal Protective Equipment Selection for Oil Spill RespondersPlanning, Designing, and Constructing Floating Production Systems
API has published more than 220 standards that apply to offshore oil and gas operations under its accredited standards program. This poster includes over 100 of those standards, focusing on some of the more prominent documents that cover fixed offshore platforms, drilling operations, floating production systems, and subsea completion equipment.www.api.org
Copyright 2015 – American Petroleum Institute, all rights reserved. DM2015-050 | 04.05