1

APRILIA RSV4/TUONO 1100FENDER ELIMINATOR

2

3

Remove seat and unplug stock connector. (Picture 1)

Remove stock tail section by removing (3) bolts and slide off bike.

Feed harness through hole in body. Take (2) black spacers, (2) M6x25 bolts, (2) nylon nuts, and mount through lower holes on fender eliminator bracket. (Picture 2/3)

4 Take third black spacer and M6x25 bolt and thread into frame using top hole on fender eliminator bracket. (Picture 4/5)

5 Adjustable license plate bracket will come tight. Loosen bolts and adjust plate to desired location.

6 Plug harness together and mount license plate