AGP Salt Water Sanitiser

• Easy to Use Designed to simplify the sanitation of your pool.

No more adding chlorine daily. Aquablue Lite allows you to spend more time enjoying your pool and less time maintaining it. Just pour the required amount of household salt into your pool water and attach the generator-cell to the side of the pool. Aquablue Lite will continually purify pool water.

The UK’s Leading Independent Swimming Pool Manufacturer and Distributorwww.plasticapools.net Find us on

Simple, natural purification for Above Ground Pools

• Outstanding Water Quality Swim in a pool fitted with an Aquablue Lite salt

water purifier and feel the difference. Your pool water will feel silky soft. No more dry skin and red eyes. Kids, in particular, will appreciate the luxurious feel of the pool water.

• Proven Technology Salt water sanitisers have been used worldwide

for many years. More pools than ever are moving over to the Aquablue Lite. Over 90% of pools in Australia now use salt technology.

Aquablue

Your local supplier:

Aquablue Lite Salt Chlorine GeneratorThe following table shows the recommended chemical levels. Maintaining these levels will prevent corrosion and scaling. The pool water should be tested periodically.

The UK’s Leading Independent Swimming Pool Manufacturer and Distributor

www.plasticapools.net

Find us onLFTSCG2 03/2016 ST V1

Aquablue

Salt level required - 4000 mg/litre (ppm)

Example: A freshly filled above ground pool with a water volume of 10,000 litres wil require 40kg of salt. Add the required amount of salt, wait one hour and test the salt level with Aquachek Salt Strips. Add more salt if the reading is below 4000ppm (parts per million).

Example: A pool with a volume of 20,000 litres has an actual salt level of 2500ppm after testing. From the above chart it will then require an additional 30kg to be added.

Actual Salt Level - in ppm

PoolWater

Volumex 1000 litres

0 500 1000 1500 2000 2500 3000 3500 4000

Quantity of salt to add in kg