aquatap - shop4-waterheaters · aquatap consider the economic and environmental costs of a hot ......
TRANSCRIPT
AquatapBoiling, chilled and ambient drinking water
3
AquatapConsider the economic and environmental costs of a hot
drinks vending machine. Expensive consumables, constant
refilling, usually done by someone driving to the premises.
This is also true for many chilled water systems that rely
on the delivery of bottled water and the expense of
waste removal.
Aquatap saves time and money from day one. At the touch of
a button it dispenses instant boiling or chilled water. According
to tests at which.co.uk, the average time it takes to boil a litre of
water in a kettle is 2 mins 34 secs. With Aquatap there’s no waiting
around.
Reliability and performance are built in. Aquatap utilises our
proven Supreme technology and patented Intelliboil™Plus system.
Add to that a range of advanced safety features and easy
installation, Aquatap is the clear choice for high usage staff
kitchens or conference facilities where convenience, efficiency
and space are prime concerns.
Three Aquatap choices:
Boiling water
Boiling and Chilled water
Boiling and Ambient water
Specification Advice Hotline: 01603 420220 Email: [email protected]
4
5
Features and benefits• Modernappliancedesign
• Undercounterdesignmaximisescountertopspace
• Intelliboil™Plus technology for the efficient management of the boiling cycle
• Boilingwatersafetyswitch
• Over-boilprotectionsystem
• Easyinstallation
• Integralelectronicwaterconditionertoreducescale
• Engineeringgradethermoplasticwatercontainer
• Modularconstructionensureseasymaintenance
• LEDindicatorsforboilingwaterstatus
• Choiceoffilterornon-filter
• ChromefinishAquatapdispenser
• Upto30cupsofboilingwaterimmediatedraw-off
• Upto80cupsofchilledwaterimmediatedraw-off
• Twoyearon-sitepartsandlabourguarantee
Intelliboil™Plus cycle – Aquatap water heater
Ongoingdemand No demand
Reneweddemand
100
99
98
97
96
95
15 30 45 60 75 90 105 120 840 855 870 885 900
Tem
per
atur
e (º
C)
Time (minutes)
LikeallHeatraeSadiaproducts,theAquatapisdesignedforeasyinstallation.Both
the heater and chiller units are floor standing and with no brackets required, it’s a
simple “plug and play” tap connection.
Maintenance costs are kept to a minimum through smart design and common
sense. An integral scale inhibitor reduces the rate of scale deposition in hard water
areas, and the option to choose a filter system means that in areas where water is
considered of good standard, no filter is required.
For the chilled water option, Aquatap uses our tried and tested SuperChill
technology.Unlikemanyothermixedboilingandchilledwaterappliancesthechilled
waterunitcanbeservicedseparately.Intheunlikelyeventthatafaultdevelopsit
won’t affect the supply of boiling water.
Intelliboil™Plus is our patented hot water management system that controls the
boilingcycleforimprovedefficiency.Itregularlybringsthewatertoboilinresponse
to usage, but if no water is drawn off for over an hour it reduces the maximum stored
water temperature from100°Cto98°C.Thissaveselectricityuntil theAquatap is
used again – perhaps the next day or after a weekend – at which time the normal
boiling cycle automatically resumes.
Aquatap
Specification Advice Hotline: 01603 420220 Email: [email protected]
6
Aquatap
Aquatap Boiling water
Isolatingvalve
Flexiblehose
1.5mm2 3-coresheathed cable
Mainswater supply
Heater unit
Fusedspur
Dispensercable
Clamps
Clamps
Tap outlethose
Tap venthose
Installation
Typical installtion schematics are shown for the range of Boiling /
Ambient / Chilled water models.
7
Aquatap Boiling / Ambient water Aquatap Boiling / Chilled water
Controlbox
Isolatingvalve
Flexiblehose
Mainswater supply
Heater unit
Isolatingvalve
Fusedspur
Dispensercable
Clamps
Clamps
Tap outlethose
Tap venthose
Ambientwater supply
1.5mm2 3-coresheathed cable
Controlbox
Isolatingvalve
Flexiblehose
1.5mm2 3-coresheathed cable
Mainswater supply
Chiller unitHeater unit
Isolatingvalve
Fusedspur
Dispensercable
Clamps
Clamps
Tap outlethose
Tap venthose
Chilled watersupply
8
Specification and installation
Water heaterSpecificationCapacity5litre–30cups(167ml)or20mugs(250ml)atonetime.
Rating2.5kW@240V(2.3kW@230V)torecover135cups(167ml)perhour.
Outer CasingWhite high impact thermoplastic.
Thermal insulationCFC/HCFCfree(ODPzero)pre-mouldedpolystyreneandthermoplasticblend.
Water ContainerMouldedPolyphenyleneSulphide.Removablesteamcondensationchamberformaintenance access.
Heat UnitLowwattdensitySuperloyelementforlonglife.
ThermostatElectronic to control water temperature up to boiling point. Electromagnetic wave generator to reduce limescale formation.
Safety featuresLowpressurevented.Drystartprotectionbyself-resettingbi-metalthermalcut-out.Boil-dryprotectionbymanuallyresettablebi-metalcut-out.
InstallationFixingMustbeinstalledverticallymountedonalevelsurfaceensuringanysupportingsurface can carry the full weight.
PlumbingColdwaterfeedshouldbetakendirectlyfromthemains–minimumpressure0.5bar(7psi),maximumpressure10bar(145psi).
Top entry 1/2"BSPinletandoutletconnections.Topentry1/2"BSPdispensertapvent connection.
ElectricalThe water heater is supplied with a 1.5 metre electrical supply cable which must be connected to the electrical supply via a double pole isolating switch with a contact separation of at least 3mm in both poles. The electrical supply should be from a 13 amp fused spur. The water heater must be connected to the dispenser by the black sheathed control cable.
When using the dual dispenser a solenoid relay control box is supplied. The electrical supply should be from a 13 amp fused spur.
For significant periods of unuse further running costs can be reduced by incorporatingatimeswitch–availableasanaccessory(productcode95:970:124)which can be set to switch on the unit for a suitable period of time to allow for re-heat.
Water chillerSpecificationRating180W@230/240V.
Compressor power1/1 2HP.
Chilled water output30litres/hour(6.6gallons/hour)atnominal10ºC.
Rated pressure3 bar.
Minimum inlet pressure1 bar.
Outer casingBrushedstainlesssteeleffectplastic-coated,corrosion-proofedsteel.
Water chilling systemHermeticicebankdirectcoolingsystem.
ThermostatAdjustablefrom3ºCto10ºC.
Refrigerant140grammesofCRC-freeR134A.
InstallationMountingOnalevelhorizontalsurface.Minimum60mmspaceshouldbeallowedaroundtheunit for adequate ventilation by way of louvre grilles being fitted to the cabinet.
PlumbingCold water feed must be taken from a potable mains supply with a minimum inlet pressureof1bar.Thepressurereducer(supplied)mustbeincorporatedinthecoldwater supply to the unit.
ConnectionsInletconnection8mmfemalepushfit.An8mmx3/8" male adaptor is supplied for connectiontofixedpiping.Outletconnectiontooutlettap6mmfemalepushfit.6mmoutsidediameterflexiblepipeandinsulationsupplied.
ElectricalUnitissuppliedwitha2metreflexiblecablewithmoulded3-pinplug.Theelectricalsupply must be earthed and be fused 3 amp. Connection to the electrical supply mustbeviaadoublepole-isolatingswitchwithacontactseparationofatleast3mminbothpoles.InstallationmustbeinaccordancewiththelatestIEEWiringRegulations.
When using the dual dispenser a solenoid relay control box is supplied. The electrical supply should be from a 13 amp fused spur.
For significant periods of unuse further running costs can be reduced by incorporatingatimeswitch–availableasanaccessory(productcode95:970:124)which can be set to switch on the unit for a suitable period of time to allow for re-chilling.
9Specification Advice Hotline: 01603 420220 Email: [email protected]
Water dispenserSpecificationFinishDiecast,chrome-platedbodyandbuttons.
Safety featuresIntegraldualactionsafetyfeaturetopreventaccidentalboilingwaterdelivery. BoilingwaterdeliveryindicatorLED.
InstallationThe dispensing tap is suitable for mounting onto a worktop or counter surface andmustbepositionedsothatitdischargesintoasinkorthepurpose-designeddriptray–availableasanaccessory(productcode95:970:138).
Anoptionaldispenserextension(productcode95:970:139)isavailabletoraisetheheight of the dispenser outlet to 235mm from the dispenser base, making taller vessels easier to fill.
Guarantee
This Aquatap water heater, chiller and dispensing tap assembly is guaranteed for a periodoftwoyearsfromthedateofpurchaseprovided:
• TheAquatapwaterheater,chilleranddispensingtapassemblyhavebeeninstalled in accordance with the supplied instructions and all necessary water, vent and electrical connections have been fitted correctly.
• AnyvalvesorcontrolsareofHeatraeSadiarecommendedtype.
• Theunithasnotbeentamperedwithandhasbeenregularlymaintainedasdetailed in the maintenance instructions.
• OnlyarecommendedAquatapdispensingtapassemblyhasbeenusedtodeliver the water.
• Theunithasbeenusedonlyforheatingandchillingwholesome(potable)water.
• TheunithasbeeninstalledintheUK.
• Within60daysofinstallationtheusercompletesandreturnstheguaranteeregistration card supplied.
The unit and dispensing tap assembly are not guaranteed against damage by frostorduetothebuildupofscale.Pleasenotethatifheateam(HeatraeSadia’sservicedivision)personneloragentsarerequestedtodescaleaunit,thisworkwillbe chargeable.
This guarantee does not affect the statutory rights of the consumer.
ISO 9001:2008FM 01862
BS OHSAS 18001:2007OHS 515891
ISO 14001:2004EMS 556355
10
Performanceandaccessories
PerformanceModel
Boiling water
Boiling and chilled water
Boiling and ambient water
Boiling volume at one time
(litres)
5
5
5
Boiling water Cups (167ml)
recovery per at hour once
135 30
135 30
135 30
Cup holder
A cup holder is the neat and tidy solution for cup storage adjacent to your Aquatap.
Accepts plastic or paper cups with a rim diameterof70-85mm.
Water filter
The water filter system reduces impurities, odour and unpleasant taste. The filter head incorporates an integral shut off valve, to facilitate quick and simple replacement of the filter cartridge which shouldbereplacedafteroneyearor11,000litres,whichever is earliest.
Accessories ordering guideModel
7daydigitaltimer
Cup holder
Water filter system
Water filter cartridge
Driptray
Dispenserextensionpiece
Product code
95:970:124
95:970:127
95:970:129
95:970:130
95:970:138
95:970:139
Boiling water Mugs (250ml)
recovery per at hour once
90 20
90 20
90 20
Chilled water output
(litres/hour)
-
30
-
Chilled water output
(200ml glass/hour)
-
150
-
7 day digital programmer
Allows Aquatap to be automatically switched on and off, on a daily basis. This ensures greater economy when premises are unoccupied for extended periods. This optional accessory allows up to 42 switching operations per week and is integrated into a fused spur unit. For use with Aquatap boiling only and Aquatap boiling and chilled.
• Simpletwobuttonprogramming.
• Self-cancellingoverride.
• IntegraldoublepoleswitchandBS1362fuse.
• 1000hourrechargeablememorybackup.
• Voltagefreecontacts.
• Fitsontoa25mmdeep,singlegangwallbox.
• 85x85x38mm.
11
Boiling and chilled / ambient dispenserBoiling water dispenser
Model
Dispenser
A
(mm)
60
B
(mm)
118
C
(mm)
235
Weight
(kg)
2
Model
Dispenser
A
(mm)
60
B
(mm)
118
C
(mm)
235
Weight
(kg)
2
Water chiller
Chilled wateroutlet (Ø6mm)
Icebankwater fill
connectionThermostat
adjuster
Electricalcable inlet
Inletconnection8mm dia or
3/8" BSP
Room temperaturewater outlet (Ø6mm)
A
CB
Model
Water chiller
A
(mm)
405
B
(mm)
255
C
(mm)
400
Weight empty full (kg) (kg)
25 27
Water heater
Model
Water heater
A
(mm)
296
B
(mm)
350
C
(mm)
480
Weight empty full (kg) (kg)
11.516.5
Specification Advice Hotline: 01603 420220 Email: [email protected]
Dimensionsandorderingguide
Ordering guideModel
Boiling water – Includessingleoutputdispenserand water heater.
Boiling and chilled water – Includesdualoutputdispenser,waterheaterand water chiller.
Boiling and ambient water – Includesdualoutputdispenserand water heater.
Product code
95:200:261
95:200:262
95:200:263
Rating
240V
240V
240V
BA
61
181
309C
55max.
BA
61
181
309C
55max.
BA
61
181
309C
55max.
BA
61
181
309C
55max.
A
B
C
Out
let
Vent
Tap
ele
ctric
al c
onn
ectio
nM
ains
(ele
ctric
al s
upp
ly)
Inle
t
HeatraeSadiaHeatingHurricaneWayNorwichNorfolkNR66EA
HeatraeSadiaHeatingmayintroducemodificationstotheirproductsfrom time to time. Consequently, the details given in this brochure are subject to alteration without notice.
95900918Issue1©HeatraeSadiaHeating2011
heateamisHeatraeSadia’sveryownservicedivision.With us on your side, you can be sure that your customers are in the very best hands. Totally committed to quality and safety, heateam is open 7daysaweek,for363daysayear,andoffers:
• Dedicated Trade Advice Line – our helpful and qualified specialists are always on hand to help you with even the most complex technical query.
• Installer Priority Call-Outs–our280strongteamof specifically trained expert heating engineers coverstheUK,nooneisbetterqualifiedtolookafterHeatraeSadia’sproductsfortheduration of the guarantee.
• Fully Stocked Vans – a nationwide fleet of vans, fully stocked with spare parts – meaning we can repairourappliancesonthefirstvisitin95%ofcall-outs.
• Exclusive Service Plans – heateam also offer HeatraeSadia’scustomersarangeofexclusiveannual service plans.
OpeningTimes:Monday-Friday8am-6pm,weekendsandBankHolidays*8.30am-2pm. *excludingChristmasDayandNewYear’sDay.
Simply call 0844 8711535 or visit our website at www.heateam.co.uk
PN95900918B
JN201525F
CN405004/00
Brochures for all of our products are
availablefreeofcharge.Pleasecallour
literaturehotlineon01603420127.
MEgAFLO ECO
Megafloecocylinderrange
DOMESTIC HEATIng AnD HOT WATER
Aerheat Amptec Electric Solar Electromax Electromax Solar ImmersionHeaters MegalifeHE MegalifeSolar MultipointInstantaneous
COMMERCIAL HOT WATER
B3M/C3M Express FBM Handy HandyDri/HairDrier Hotflo Multipoint MultipointSS Streamline UTC99
DRInkIng WATER
Aquatap SuperChill Supreme
Thisproductisprintedon50%recycled paper. This product is printed using vegetable based inkswhicharenontoxic.Please recycle this product once you have finished with it.
ContactSpecification Advice Hotline T:01603420220F:01603420229 E:[email protected]
After Sales Service T:08448711535F:08448711528 E:[email protected]
Web www.heatraesadia.com
FSC LOGO