aqueous parts washer

as drop-in replacements for conven- tional barrel systems. Vibroset vibratory plating units are the only vibratory units to incorporate autosensing and autoadjusting features. The autosensor detects the movement of parts and ad- justs the frequency and power accord- ingly. This eliminates the need for con- stant monitoring of changes in load sizes and level of viscosity in the plating bath. As a result the Vibroset units ensure optimal mixing is achieved.

Circle 409 on the reader service card

Automatic Blast Machine Guyson Corp. Saratoga Springs, N. Y

Guyson Corp. has developed a new two-spindle automatic blast machine for repeatable impact treatment of a moderate volume of components that require all-around coverage. The system is intended to be a simple, eco- nomical alternative for users who don’t need higher-production indexing spin-

blast cabinet dimensions of 74 X 40 X 50 in. The machine can be equipped with up to 6 suction-blast guns or up to 4 direct-pressure blast nozzles mounted at the correct angles and dis- tances to the work on multiadjustable brackets. For coverage of larger parts and for reduction of compressed air requirements, nozzle traversing can be provided. The fixtured components slowly rotate at controlled speed dur- ing the the automatic cycle, exposing 360” of part surfaces to the blast. An automatic airwash or blow-off cycle follows blasting.


Aqueous Parts Washer Hydra-Blast Inc. Vancouver, Wash.

dle-blast machines with 4 to 12 or more spindles. The twin spindle machine is designed to be compact enough for work cell use, with overall

The Hydro-Blast Model 30TL is a top-loading aqueous parts washer. Parts are easily loaded onto the tum- table. The Model 30TL cleans parts quickly and safely with hot water and biodegradable soap, which usually

Circle 006 on reader information card

.

Expanded Mesh 0 07” x 0 18” diamond . . 50% expansion

Plcrtinum C/ad 125 and 250 microinches single and double sided

Niobium ( Columbium ) 0.012” to O/014” thick

E/ectrtca/ ResistMy Platinum - 10.6 micro-ohm/cm Niobium - 13.1 micro-ohm /cm Titanium - 42.0 micro-ohm /cm

So/Id Sheet : The same spec OS exp. mesh

Stock Dlmenslon 6” width x 120 feet

special Features :

bLonaerUselulLne

Web site h~p://www.gdl.net/plateworld

Plattnum clad niobium provides a non-porous and unitorm layer of plattnum which metollurglcally bonded onto the niobium. Platinum clad onode last longer with no premature failure In hlgh speed , high current plating and electrowinning.

&More Niobium con endure higher concentration of chloride in the bath than tltanlum.

QW Niobium is 3.5 times more CCftduCtive thatI the titanium. Hence the current and depostt distrl butlon Is more unltorm throughout the part 4 and throughout the whole rock or barrel Iaad.

b power Cod Se Niobium electrical resistance is only l/3 of Titanium. Hence the ret tttler cost and electrkity consumption reduced slgniticontiy.


56 METAL FINISHING . JULY 1997

includes a rust inhibitor. It has a load height of 30 in., a 500-lb weight capacity, and a 25-in. turntable diam-

Compounds ’ Ear compwndr (ali sh)

for metah plastics & wood

’ Greaxles Compound

* Greasestick (Abrwe

Lubricant)

* Liqufd Compound

* Rouges

eter. It will clean small parts as well as engine blocks, fuel injectors, or transmissions. The optional waste- water evaporation system can reduce cradle-to-grave liabilities and dis- posal costs.


Digital pH/Temperature/Specific Ion Meter Kernco instruments Co. Inc. El Paso, Texas

Kernco Instruments introduces its new Model 671 multiparameter digital meter that measures on a selector switch mode pH, redox (ORP), temperature, and specific ions. The unit is designed for either laboratory or plant use, as it is light in weight (approximately 3% lb) with compact dimensions of 11 X 8 X 6 in. The Model 67 1 has manual and automatic temperature compensation modes, slope adjustment control; polarizing current output for tritration, includ-

* Abrasive Grain We’// Make You Shine! ??bimem Ch B‘ ’ Contact wheels 8cm6A2-7456 FWlEkS * Full Disc Polishing luleels 200 WARD AVENUE *tkJrdPabr ’ Nylon Atrowe BNshes UICA NEW YORK 13503

PHONE: 3W797-0470 *Deank9&_ * Pieced Polishing wheelr FAX: 3151797-a150 w&s


ing Karl Fischer titration; and output for interfacing into a recorder.


Magnetic Coupled Pump March Mfg. Co. Inc. Glenview, 111.

The new Model 320 sealless magnetic-coupled corrosion-resistant cen- trifugal pump is designed for applica- tions requiring low flow, but when it’s necessary to develop pressure, flow to 3.3 gpm, high head to 40 ft (17.3 psi). This compact size pump has the dura-


METAL FINISHING ?? JULY 1997 57

aqueous parts washer

Documents