arab center for engineering studies aces …...(specific gravity), and absorption of fine aggregate...
TRANSCRIPT
This is to attest that
ARAB CENTER FOR ENGINEERING STUDIES ACES-DOHA INDUSTRIAL AREA STREET NO.41, GATE NO.197
P.O.BOX:19579, AHMED BIN ALI STREET DOHA 00974, STATE OF QATAR
Testing Laboratory TL-343
has met the requirements of AC89, IAS Accreditation Criteria for Testing Laboratories, and has demonstrated compliance with ISO/IEC Standard 17025:2017, General requirements for the competence of testing and calibration laboratories. This organization is accredited to provide the services specified in the scope of accreditation on the following page(s).
This certificate is valid up to January 1, 2021.
This accreditation certificate supersedes any IAS accreditation bearing an earlier effective date. The certificate becomes invalid upon suspension, cancellation or revocation of accreditation. See www.iasonline.org for current accreditation information, or contact IAS at 562-364-8201.
Raj Nathan President
International Accreditation Service, Inc.
3060 Saturn Street, Suite 100, Brea, California 92821 U.S.A. Telephone +1 562-364-8201 — [email protected]
www.iasonline.org Page 1 of 112
IAS Accreditation Number TL-343 Company Name Arab Center for Engineering Studies ACES-Doha Address Industrial Area, Street No. 41, Gate No 197
P.O. Box 19579, Ahmed Bin Ali Street Doha 00974, State of Qatar
Contact Name Ghalab Al Zubi Telephone +974 44870161 Effective Date of Scope January 17, 2020 Accreditation Standard ISO/IEC 17025: 2017
PWA
No. Category Standard/ Method No. /Date
Standard/Method Title & Section
Location / Facility Authorized Technicians
1. 2.7 Aggregate AASHTO T112 and ASTM C142/ C142M
Standard Test Method for Clay Lumps and Friable Particles in Aggregates (Clay Lumps and Friable Particles in Aggregates)
Street 41/Aggregate Testing Lab
1-Mohamed jamal Jay-Are 2-Bles Sunday 3-Ahmed Rasheed suddesh Sudhakaran 4-Rex Dan cumay Rommel Claridad Onikay 5-Yassine Hosni
2. 2.16 Aggregate AASHTO T304 Method A and ASTM C1252
Standard Test Methods for (Uncompacted Void Content of Fine Aggregate (as Influenced by Particle Shape, Surface Texture, and Grading))
Street 41/Aggregate Testing Lab
1. Jay-Ar Failano Lamarca 2. Benzan usman 3. Manendra Mugrati 4. Mohamed Aslam 5. Gopal Pipera 6. Victor Chidiadi 7. Okoye Onyeka Etien 8. Dimith
TL-343 Page 2 of 112 Arab Center for Engineering Studies ACES-Doha
PWA No. Category Standard/ Method
No. /Date Standard/Method Title &
Section Location /
Facility Authorized Technicians
3. 2.13 Aggregate ASTM C88and AASHTO T104
Soundness of Aggregates by Use of Magnesium Sulfate
Street 41/Aggregate Testing Lab
1-Rex Dan Cumay-Ao 2-Jay-Ar Failano Lamarca 3-Jay-R Soleda Bueno 4-Okoye Onyeka Etien 5-Ian Bueno Janerol Bueno Janerol 6-Gopal Pippera 7-Sembo Tamong Kosimee (Qasim) 8-Peter Olurotimi Omoshuli
4. 2.4 Aggregate ASTM C 117 Standard Test Method for (Material Finer Than 75- μm (No. 200) Sieve in Mineral Aggregate by Washing)
Street 41/Aggregate Testing Lab
1-Rex Dan Cumay-Ao 2-Sachit Rai 3-Rommel Frando Claridad 4-Amir Hasan 5-Upendra Kumar Nyaupane 6-Nishad Deepal Salanga Don 7-Salama Ragab Sulaiman 8-Nicanor Amarante Almendra 9-Aneesh Babu 10-Randy Vidad 11-Okoye Onyeka Etien
5. 2.8 Aggregate ASTM C123/C123M Lightweight particles in Aggregate
Street 41/Aggregate Testing Lab
1. Rex Dan Cumay-Ao 2. Sachit Rai 3. Rommel Frando Claridad 4. Amir Hasan 5. Upendra Kumar Nyaupane 6. Nishad Deepal Salanga Don 7. Salama Ragab Sulaiman 8. Nicanor Amarante Almendra 9. Aneesh Babu 10. Randy Vidad 11. Okoye Onyeka Etien
TL-343 Page 3 of 112 Arab Center for Engineering Studies ACES-Doha
PWA No. Category Standard/ Method
No. /Date Standard/Method Title &
Section Location /
Facility Authorized Technicians
6. 2.6 Aggregate ASTM C127 and AASHTO T 85
Standard Test Method for Density, Relative Density (Specific Gravity), and Absorption of Coarse Aggregate
Street 41/Aggregate Testing Lab
1. Jay-Ar Failano Lamarca 2. Benzan usman 3. Amir Hasan 4. Manendra Mugrati 5. Nishad Deepal Salanga Don 6. Mohamed Aslam 7. Gopal Pipera 8. Victor Chidiadi 9. Okoye Onyeka Etien 10. Dimith 11. Salam Ragab Suliman
7. 2.5 Aggregate ASTM C128 and AASHTO T84
Standard Test Method for Density, Relative Density (Specific Gravity), and Absorption of Fine Aggregate
Street 41/Aggregate Testing Lab
1-Rex Dan Cumay-Ao 2-Sachit Rai 3-Rommel Frando Claridad 4-Amir Hasan 5-Upendra Kumar Nyaupane 6-Nishad Deepal Salanga Don 7-Salama Ragab Sulaiman 8-Nicanor Amarante Almendra 9-Aneesh Babu 10-Randy Vidad 11-Okoye Onyeka Etien
8. 2.11 Aggregate ASTM C131/C131M and ASHTO T96
Standard Test Method for (Resistance to Degradation of Small-Size Coarse Aggregate by Abrasion and Impact in the Los Angeles Machine)
Street 41/Aggregate Testing Lab
1. Jay-Ar Failano Lamarca 2. Benzan usman 3. Amir Hasan 4. Manendra Mugrati 5. Nishad Deepal Salanga Don 6. Mohamed Aslam 7. Gopal Pipera 8. Victor Chidiadi 9. Okoye Onyeka Etien 10. Dimith 11. Salam Ragab Suliman
TL-343 Page 4 of 112 Arab Center for Engineering Studies ACES-Doha
PWA No. Category Standard/ Method
No. /Date Standard/Method Title &
Section Location /
Facility Authorized Technicians
9. 2.3 Aggregate ASTM C136 Standard Test Method for Sieve Analysis of Fine and Coarse Aggregates (Particle Size Distribution)
Street 41/Aggregate Testing Lab
1. Jay-Ar Failano Lamarca 2. Benzan usman 3. Amir Hasan 4. Nishad Deepal Salanga Don 5. Salama Ragab Sulaiman 6. Aneesh Babu 7. Randy Vidad 8. Okoye Onyeka Etien
10. 2.12 Aggregate ASTM C535 Resistance to Degradation of Large-Size Coarse Aggregate by Abrasion and Impact in the Los Angeles Machine
Street 41/Aggregate Testing Lab
Rex Dan Cumay-Ao Jay-Ar Failano Lamarca Jay-R Soleda Bueno Okoye Onyeka Etien Ian Bueno Janerol Bueno Janerol Gopal Pippera Sembo Tamong Kosimee (Qasim) Peter Olurotimi Omoshuli
11. Aggregate ASTM C566 Standard Test Method for Total Evaporable Moisture Content of Aggregate by Drying
Street 41/Aggregate Testing Lab
1. Rex Dan Cumay-Ao 2. Amir Hasan 3. Tohidul Islam Ashraful Islam 4. Upendra Kumar Nyaupane 5. Randy Vidad ( 2 )
12. 2.2 Aggregate ASTM C702/C702M Standard Practice for Reducing Samples of Aggregate to Testing Size
Street 41/Aggregate Testing Lab
1-Rex Dan Cumay-Ao 2-Amir Hasan 3-Tohidul Islam Ashraful Islam 4-Upendra Kumar Nyaupane 5-Randy Vidad 6-Jay Lamarca 7-Benezen Usman
13. 2.1 Aggregate ASTM D75/D75M Standard Practice for Sampling Aggregates
Street 41/Aggregate Testing Lab
1-Rex Dan Cumay-Ao 2-Amir Hasan 3-Tohidul Islam Ashraful Islam 4-Upendra Kumar Nyaupane 5-Randy Vidad
TL-343 Page 5 of 112 Arab Center for Engineering Studies ACES-Doha
PWA No. Category Standard/ Method
No. /Date Standard/Method Title &
Section Location /
Facility Authorized Technicians
14. 1.13 Aggregate ASTM D2419 and AASHTO T176
Standard Test Method for (Sand Equivalent Value of Soils and Fine Aggregate)
Street 41/Aggregate Testing Lab
1. Sunday 2. Bles Molah 3. Mohammed Jamal. 4. Ahmed Rasheed. 5. Mohamad Aslam Nagoor 6.Abayomi Philip 7.Irshad Ansari 8.Arif Hussain 9.Victor Chidiadi 10. Massoud Kamel 11.Maskkor Mohamed anifa 12. Benizen Usman 13. Jay lamarca
15. 2.10 Aggregate ASTM D4791 Flat Particles, Elongated Particles, or Flat and Elongated Particles in Coarse Aggregate
Street 41/Aggregate Testing Lab
1. Jay-Ar Failano Lamarca 2. Benzan usman 3. Amir Hasan 4. Manendra Mugrati 5. Nishad Deepal Salanga Don 6. Mohamed Aslam 7. Gopal Pipera 8. Victor Chidiadi 9. Okoye Onyeka Etien 10. Dimith 11. Salam Ragab Suliman
16. 6.34 Aggregate ASTM D5444 Standard Test Method for Mechanical Size Analysis of Extracted Aggregate
Street 41/Aggregate Testing Lab
1. Rommel Frando Claridad 2. Rex Dan Cumay-Ao 3. Sachit Rai Amir Hasan 4. Tohidul Islam Ashraful Islam 5. Upendra Kumar Nyaupane 6. Randy Vidad
17. 2.14 Aggregate ASTM D5821 Standard Test Method for Determining the Percentage of Fractured Particles in Coarse Aggregate
Street 41/Aggregate Testing Lab
1. Jay-Ar Failano Lamarca 2. Benzan usman 3. Manendra Mugrati 4. Mohamed Aslam 5. Gopal Pipera 6. Victor Chidiadi 7. Okoye Onyeka Etien 8. Dimith
TL-343 Page 6 of 112 Arab Center for Engineering Studies ACES-Doha
PWA No. Category Standard/ Method
No. /Date Standard/Method Title &
Section Location /
Facility Authorized Technicians
18. 2.20 Aggregate BS 812-2 CL 5.3 Particle Density and Water Absorption (All Larger than 10mm Aggregate)
Street 41/Aggregate Testing Lab
1. Jay-Ar Failano Lamarca 2. Ian Bueno 3. Jay-Ar soledo Bueno 4. Benzan usman 5. Gopal Pipera 6. Okoye Onyeka Etien 7. Sembo
19. 2.21 Aggregate BS 812-2 CL 5.4 Particle Density and Water Absorption (5-40mm Aggregate)
Street 41/Aggregate Testing Lab
Rex Dan Cumay-Ao Jay-Ar Failano Lamarca Jay-R Soleda Bueno Okoye Onyeka Etien Ian Bueno Janerol Bueno Janerol Gopal Pippera Sembo Tamong Kosimee (Qasim) Peter Olurotimi Omoshuli
20. 2.22 Aggregate BS 812-2 CL 5.5 Particle Density and Water Absorption (10mm Aggregate and Smaller)
Street 41/Aggregate Testing Lab
Rex Dan Cumay-Ao Jay-Ar Failano Lamarca Jay-R Soleda Bueno Okoye Onyeka Etien Ian Bueno Janerol Bueno Janerol Gopal Pippera Sembo Tamong Kosimee (Qasim) Peter Olurotimi Omoshuli
21. 2.17 Aggregate BS 812-102 Sampling of Aggregate Street 41/Aggregate Testing Lab
1. Rex Dan Cumay-Ao 2. Amir Hasan 3. Tohidul Islam Ashraful Islam 4. Upendra Kumar Nyaupane 5. Randy Vidad
22. 2.24 Aggregate BS 812-103.1-7.2 Particle Size Distribution (Wet)
Street 41/Aggregate Testing Lab
1-Nicanor Amarante Tohidul Islam Ashraful Islam 2-Randy Vidad Mohamed Jamal Jay-Are
TL-343 Page 7 of 112 Arab Center for Engineering Studies ACES-Doha
PWA No. Category Standard/ Method
No. /Date Standard/Method Title &
Section Location /
Facility Authorized Technicians
23. 2.25 Aggregate BS 812-103.1-7.3 Particle Size Distribution (Dry)
Street 41/Aggregate Testing Lab
1-Nicanor Amarante Tohidul Islam Ashraful Islam 2-Randy Vidad Mohamed Jamal Jay-Are
24. 2.30 Aggregate BS 812-105.1 Method Of Determination of Particle Shap (Flakiness Index)
Street 41/Aggregate Testing Lab
1-Rex Dan Cumay-Ao 2-Jay-Ar Failano Lamarca 3-Jay-R Soleda Bueno 4-Okoye Onyeka Etien 5-Ian Bueno Janerol Bueno Janerol 6-Gopal Pippera 7-Sembo Tamong Kosimee (Qasim) 8-Peter Olurotimi Omoshuli
25. 2.32 Aggregate BS 812-105.2 Method Of Determination of Particle Shap (Elongation Index)
Street 41/Aggregate Testing Lab
1-Rex Dan Cumay-Ao 2-Jay-Ar Failano Lamarca 3-Jay-R Soleda Bueno 4-Okoye Onyeka Etien 5-Ian Bueno Janerol Bueno Janerol 6-Gopal Pippera 7-Sembo Tamong Kosimee (Qasim) 8-Peter Olurotimi Omoshuli
26. 2.18 Aggregate BS 812-109 CL 6 Testing aggregates - Methods for determination of moisture content (Oven Drying)
Street 41/Aggregate Testing Lab
1. Rex Dan Cumay-Ao 2. Sachit Rai 3. Rommel Frando Claridad 4. Amir Hasan 5. Upendra Kumar Nyaupane 6. Nishad Deepal Salanga Don 7. Salama Ragab Sulaiman 8. Nicanor Amarante Almendra 9. Aneesh Babu 10. Randy Vidad 11. Okoye Onyeka Etien
TL-343 Page 8 of 112 Arab Center for Engineering Studies ACES-Doha
PWA No. Category Standard/ Method
No. /Date Standard/Method Title &
Section Location /
Facility Authorized Technicians
27. 2.33 Aggregate BS 812-110 Testing aggregates (Methods Determination of Aggregate Crushing Value)
Street 41/Aggregate Testing Lab
1-Mohamed jamal Jay- Are 2-Bles Sunday 3-Ahmed Rasheed suddesh Sudhakaran 4-Rex Dan cumay Rommel Claridad Onikay
28. 2.34 Aggregate BS 812-111 Determination of Ten Percent Value
Street 41/Aggregate Testing Lab
1-Rex Dan Cumay-Ao 2-Jay-Ar Failano Lamarca 3-Jay-R Soleda Bueno 4-Okoye Onyeka Etien 5-Ian Bueno Janerol Bueno Janerol 6-Gopal Pippera 7-Sembo Tamong Kosimee (Qasim) 8-Peter Olurotimi Omoshuli
29. 2.35 Aggregate BS 812-112 Determination of Aggregate Impact Value
Street 41/Aggregate Testing Lab
1. Rex Dan Cumay-Ao 2. Jay-Ar Failano Lamarca 3. Jay-R Soleda Bueno 4. Okoye Onyeka Etien 5. Ian Bueno Janerol Bueno Janerol 6. Gopal Pippera 7. Sembo Tamong Kosimee (Qasim) 8. Peter Olurotimi Omoshuli
30. 2.37 Aggregate BS 812-117 Determination of Water Street 41/ Chemical Section
1. Saleem Kalathil 2. Muneer MC
31. 2.38 Aggregate BS 812-117 App. C Determination of Chloride Content (Acid Extract)
Street 41/Chemical Section
1. Saleem Kalathil 2. Muneer MC
32. 2.39 Aggregate BS 812-118 Determination of Sulphate Content
Street 41/Chemical Section
1. Saleem Kalathil 2. Muneer MC
TL-343 Page 9 of 112 Arab Center for Engineering Studies ACES-Doha
PWA No. Category Standard/ Method
No. /Date Standard/Method Title &
Section Location /
Facility Authorized Technicians
33. Aggregate BS EN 932-1 Tests for general properties of aggregates. (Methods for sampling)
Street 41/Aggregate Testing Lab
1. Rex Dan Cumay-Ao 2. Amir Hasan 3. Tohidul Islam Ashraful Islam 4. Upendra Kumar Nyaupane 5. Randy Vidad ( 2 )
34. Aggregate BS EN 932-2 Tests for general properties of aggregates. (Methods for reducing laboratory samples)
Street 41/Aggregate Testing Lab
1. Rex Dan Cumay-Ao 2. Amir Hasan 3. Tohidul Islam Ashraful Islam 4. Upendra Kumar Nyaupane 5. Randy Vidad ( 2 )
35. 2.23 Aggregate BS EN 933-1 Tests for geometrical properties of aggregates - Determination of particle size distribution — Sieving method (Particle Size Distribution)
Street 41/Aggregate Testing Lab
1-Mohamed jamal Jay- Are 2-Bles Sunday 3-Ahmed Rasheed suddesh Sudhakaran 4-Rex Dan cumay Rommel Claridad Onikay 5-Yassine Hosni
36. 2.26 Aggregate BS EN 933-1 Tests for geometrical properties of aggregates - Determination of particle size distribution — Sieving method (Material Finer than 0.075mm)
Street 41/Aggregate Testing Lab
1-Mohamed jamal Jay- Are 2-Bles Sunday 3-Ahmed Rasheed suddesh Sudhakaran 4-Rex Dan cumay Rommel Claridad Onikay 5-Yassine Hosni
37. 2.27 Aggregate BS EN 933-1 CL A.4.4
Tests for geometrical properties of aggregates - Determination of particle size distribution — Sieving method (Material Finer than 0.063mm)
Street 41/Aggregate Testing Lab
1-Mohamed jamal Jay- Are 2-Bles Sunday 3-Ahmed Rasheed suddesh Sudhakaran 4-Rex Dan cumay Rommel Claridad Onikay 5-Yassine Hosni
TL-343 Page 10 of 112 Arab Center for Engineering Studies ACES-Doha
PWA No. Category Standard/ Method
No. /Date Standard/Method Title &
Section Location /
Facility Authorized Technicians
38. 2.29 Aggregate BS EN 933-3 Determination of particle shape — Flakiness index
Street 41/Aggregate Testing Lab
1-Rex Dan Cumay-Ao 22-Jay-Ar Failano Lamarca 3-Jay-R Soleda Bueno 4-Okoye Onyeka Etien 5-Ian Bueno Janerol Bueno Janerol 6-Gopal Pippera 7-Sembo Tamong Kosimee (Qasim) 8-Peter Olurotimi Omoshuli
39. 2.31 Aggregate BS EN 933-4 Tests for geometrical properties of aggregates Determination of particle shape. Shape index
Street 41/Aggregate Testing Lab
1-Rex Dan Cumay-Ao 2-Jay-Ar Failano Lamarca 3-Jay-R Soleda Bueno 4-Okoye Onyeka Etien 5-Ian Bueno Janerol Bueno Janerol 6-Gopal Pippera 7-Sembo Tamong Kosimee (Qasim) 8-Peter Olurotimi Omoshuli
40. 2.28 Aggregate BS EN 933-7 Determination of shell content. Percentage of shells in coarse aggregates
Street 41/Aggregate Testing Lab
1-Rex Dan Cumay-Ao 2-Jay-Ar Failano Lamarca 3-Jay-R Soleda Bueno 4-Okoye Onyeka Etien 5-Ian Bueno Janerol Bueno Janerol 6-Gopal Pippera 7-Sembo Tamong Kosimee (Qasim) 8-Peter Olurotimi Omoshuli
41. 1.30 Aggregate BS EN 933-8 Assessment of fines — Sand equivalent test
Street 41/Aggregate Testing Lab
1-Tohidul Islam Ashraful Islam 2-Sunday Ifeanyichukwu Izukwe 3-Mohammed Gamal Abdulradi Alsayed 4-Mohammed Abdulhamid Abdulalim Ali 5-Esosa Simeon Omwanghe
TL-343 Page 11 of 112 Arab Center for Engineering Studies ACES-Doha
PWA No. Category Standard/ Method
No. /Date Standard/Method Title &
Section Location /
Facility Authorized Technicians
42. Aggregate BS EN 1097-1 (QCS 2014 Section 29)
Determination of the resistance to wear (micro- Deval)
Street 41/Aggregate Testing Lab
1. Sunday 2. Bles Molah 3. Mohammed Jamal. 4. Ahmed Rasheed. 5.Mohamad Aslam Nagoor 6.Abayomi Philip 7.Irshad Ansari 8.Arif Hussain 9.Victor Chidiadi 10. Massoud Kamel 11.Maskkor Mohamed anifa
43. Aggregate BS EN 1097-2 CL 5 Tests for mechanical and physical properties of aggregates (Determination of resistance to fragmentation by the Los Angeles test method)
Street 41/Aggregate Testing Lab
1. Rex Dan Cumay-Ao 2. Jay-Ar Failano Lamarca 3. Jay-R Soleda Bueno 4. Okoye Onyeka Etien 5. Ian Bueno Janerol Bueno Janerol 6. Gopal Pippera 7. Sembo Tamong Kosimee (Qasim) 8. Peter Olurotimi Omoshuli
44. Aggregate BS EN 1097-3 Tests for mechanical and physical properties of aggregates (Determination of loose bulk density and voids)
Street 41/Aggregate Testing Lab
1. Rex Dan Cumay-Ao 2. Jay-Ar Failano Lamarca 3. Jay-R Soleda Bueno 4. Okoye Onyeka Etien 5. Ian Bueno Janerol Bueno Janerol 6. Gopal Pippera 7. Sembo Tamong Kosimee (Qasim) 8. Peter Olurotimi Omoshuli
45. 2.19 Aggregate BS EN 1097-6 Determination of particle density and water absorption of Aggregate
Street 41/Aggregate Testing Lab
Rex Dan Cumay-Ao Jay-Ar Failano Lamarca Jay-R Soleda Bueno Okoye Onyeka Etien Ian Bueno Janerol Bueno Janerol Gopal Pippera Sembo Tamong Kosimee (Qasim) Peter Olurotimi Omoshuli
TL-343 Page 12 of 112 Arab Center for Engineering Studies ACES-Doha
PWA No. Category Standard/ Method
No. /Date Standard/Method Title &
Section Location /
Facility Authorized Technicians
46. Aggregate BS EN 1367-2 Tests for thermal and weathering properties of aggregates. (Magnesium sulphate test)
Street 41/Aggregate Testing Lab
1. Rex Dan Cumay-Ao 2. Jay-Ar Failano Lamarca 3. Jay-R Soleda Bueno 4. Okoye Onyeka Etien 5. Ian Bueno Janerol Bueno Janerol 6. Gopal Pippera 7. Sembo Tamong Kosimee (Qasim) 8. Peter Olurotimi Omoshuli
47. Aggregate BS EN 1367-4 Tests for thermal and weathering properties of aggregates (Determination of Drying shrinkage)
Street 41/Aggregate Testing Lab
1. Rex Dan Cumay-Ao 2. Jay-Ar Failano Lamarca 3. Jay-R Soleda Bueno 4. Okoye Onyeka Etien 5. Ian Bueno Janerol Bueno Janerol 6. Gopal Pippera 7. Sembo Tamong Kosimee (Qasim) 8. Peter Olurotimi Omoshuli
48. 6.51 Aggregate BS EN 12697-2 Determination of Particle Size Distribution
Street 41/Aggregate Testing Lab
1. Rex Dan Cumay-Ao 2. Sachit Rai 3. Rommel Frando Claridad 4. Amir Hasan 5. Upendra Kumar Nyaupane 6. Nishad Deepal Salanga Don 7. Salama Ragab Sulaiman 8. Nicanor Amarante Almendra 9. Aneesh Babu 10. Randy Vidad 11. Okoye Onyeka Etien
TL-343 Page 13 of 112 Arab Center for Engineering Studies ACES-Doha
PWA No. Category Standard/ Method
No. /Date Standard/Method Title &
Section Location /
Facility Authorized Technicians
49. 6.37 Asphalt AASHTO PP 60 Standard Test Method for Preparation and Determination of the Relative Density of Hot Mix Asphalt (HMA) Specimens by Means of the Superpave Gyratory Compactor
Street 41/Asphalt section
1. Ehab nabil abdelfattah fayed 2. Ndukaroy igwebueze 3. Walid taher abderahman diab 4. Alfie allauigan abenojar 5. M. H. Aslam 6. Mohamed razak mohamed rizwan 7. Abdquadri opeyemi bashorun 8. Yasir arafat 9. Bed bahadur thapa 10. Mohamed umar ansari 11. Birendra mahato nuniya 12. Adel bin qayoom 13. Rajanar(rj) 14. Carman 12. Alim 13. Madzwin
50. 6.38 Asphalt AASHTO PP61 Developing Dynamic Moduluys Master Curves Using AMPT
Street 41/Asphalt section
1. Ehab nabil abdelfattah fayed 2. Ndukaroy igwebueze 3. Alfie allauigan abenojar 4. M. H. Aslam 5. Mohamed umar ansari
51. Asphalt AASHTO R30 Mixture Conditioning of Hot-Mix Asphalt (HMA),
Street 41/Asphalt section
1. Roy Mobeen 2. Alfy Yassin 3. Kareem Ehab Nabil 4. Manjula Manoj Amunuwela Gedara 5. Piyal Kumara 6. Rizwan Majeedu 7. Mohammed Ghaffair Lijin Punnoli
TL-343 Page 14 of 112 Arab Center for Engineering Studies ACES-Doha
PWA No. Category Standard/ Method
No. /Date Standard/Method Title &
Section Location /
Facility Authorized Technicians
52. Asphalt AASHTO R47 Practice for Reducing Samples of Hot Mix Asphalt (HMA) to Testing Size.
Street 41/Asphalt section
1. Ehab nabil abdelfattah fayed 2. Piyal kumara pathirana nape 3. Ndukaroy igwebueze 4. Walid taher abderahman diab 5. Alfie allauigan abenojar 6. Khaleel ahmed 7. M. H. Aslam 8. Mohamed razak mohamed rizwan 9. Julbasir s. Kamdon 10. Salifou ndima'ah sufah 11. Peter olurotimi omoshuli 12. Abdquadri opeyemi bashorun 13.Edwin chikeh nwachukwu 14. Mohamed arafat mohideen pichchai 15. Julbasir s. Kamdon 16. Yasir arafat 17. Bed bahadur thapa 18. Mohamed umar ansari 19. Bhola nath jaisi poudel 20. Birendra mahato nuniya
53. Asphalt AASHTO R83L Preparation of Cylindrical Performance Test Specimens Using the Superpave Gyratory Compactor (SGC)
Street 41/Asphalt section
1. Ehab nabil abdelfattah fayed 2. Ndukaroy igwebueze 3. Alfie allauigan abenojar 4. M. H. Aslam 5. Mohamed umar ansari 6. Noura Absaad
TL-343 Page 15 of 112 Arab Center for Engineering Studies ACES-Doha
PWA No. Category Standard/ Method
No. /Date Standard/Method Title &
Section Location /
Facility Authorized Technicians
54. Asphalt AASHTO T166 - Method A
Bulk Specific Gravity ( ) of Compacted Hot Mix Asphalt (HMA) Using Saturated Surface-Dry Specimens
Street 41/Asphalt section
1. Ehab nabil abdelfattah fayed 2. Ndukaroy igwebueze 3.Walid taher abderahman diab 4. Alfie allauigan abenojar 5. M. H. Aslam 6. Mohamed razak mohamed rizwan 7. Abdquadri opeyemi bashorun 8. Yasir arafat 9. Bed bahadur thapa 10. Mohamed umar ansari 11. Birendra mahato nuniya 12. Adel bin qayoom 13. Rajanar(rj) 14. Carman 15. Alim 16. Madzwin
TL-343 Page 16 of 112 Arab Center for Engineering Studies ACES-Doha
PWA No. Category Standard/ Method
No. /Date Standard/Method Title &
Section Location /
Facility Authorized Technicians
55. Asphalt AASHTO T209 - Method A
Standard Method of Test for Theoretical Maximum Specific Gravity (Gmm ) and Density of Hot Mix Asphalt (HMA) Maximum Specific Gravity (Gmm)
Street 41/Asphalt section
1. Ehab nabil abdelfattah fayed 2. Piyal kumara pathirana nape 3. Ndukaroy igwebueze 4. Walid taher abderahman diab 5. Alfie allauigan abenojar 6. Khaleel ahmed 7. M. H. Aslam 8. Mohamed razak mohamed rizwan 9. Julbasir s. Kamdon 10. Salifou ndima'ah sufah 11. Peter olurotimi omoshuli 12. Abdquadri opeyemi bashorun 13. Edwin chikeh nwachukwu 14. Mohamed arafat mohideen pichchai 15. Julbasir s. Kamdon 16. Yasir arafat 17. Bed bahadur thapahi 18. Mohamed umar ansari 19. Bhola nath jaisi poudel 20. Birendra mahato nuniya
TL-343 Page 17 of 112 Arab Center for Engineering Studies ACES-Doha
PWA No. Category Standard/ Method
No. /Date Standard/Method Title &
Section Location /
Facility Authorized Technicians
56. 6.46 Asphalt AASHTO T283 and ASTM D4867/D4867M
Resistance of compacted hot mix asphalt (HMA) to moisture - induced damage.
Street 41/Asphalt section
1. Ehab nabil abdelfattah fayed 2. Ndukaroy igwebueze 3. Walid taher abderahman diab 4. Alfie allauigan abenojar 5. M. H. Aslam 6. Mohamed razak mohamed rizwan 7. Abdquadri opeyemi bashorun 8. Yasir arafat 9. Bed bahadur thapa 10. Mohamed umar ansari 11. Birendra mahato nuniya 12. Adel bin qayoom 13. Rajanar(rj) 14. Carman 12. Alim 13. Madzwin
57. 6.36 Asphalt AASHTO T312 and ASTM D6925
Test for Preparing and Determining the Density of Hot Mix Asphalt (HMA) Specimens by Means of the Superpave Gyratory Compactor
Street 41/Asphalt section
1. Roy Mobeen 2. Alfy Yassin 3. Kareem Ehab Nabil 4. Manjula Manoj Amunuwela Gedara 5. Piyal Kumara 6. Rizwan Majeedu 7. Mohammed Ghaffair Lijin Punnoli
58. Asphalt AASHTO T324 Humblot hamburg wheel tracker test
Street 41/Asphalt section
1. Ehab nabil abdelfattah fayed 2. Ndukaroy igwebueze 3. Alfie allauigan abenojar 4. M. H. Aslam 5. Mohamed umar ansari
TL-343 Page 18 of 112 Arab Center for Engineering Studies ACES-Doha
PWA No. Category Standard/ Method
No. /Date Standard/Method Title &
Section Location /
Facility Authorized Technicians
59. 6.39 Asphalt AASHTO TP79 Dynamic Modulus and Flow Number for Hot Mix Asphalt (HMA)
Street 41/Asphalt section
1. Ehab nabil abdelfattah fayed 2. Ndukaroy igwebueze 3. Alfie allauigan abenojar 4. M. H. Aslam 5. Mohamed umar ansari
60. 2.15 Asphalt ASTM D546 Standard Test Method for Sieve Analysis of Mineral Filler for Bituminous Paving Mixtures
Street 41/Asphalt section
1. Roy Mobeen 2. Alfy Yassin 3. Kareem Ehab Nabil 4. Manjula Manoj Amunuwela Gedara 5. Piyal Kumara 6. Rizwan Majeedu 7. Mohammed Ghaffair Lijin Punnoli
61. 6.22 Asphalt ASTM D979/D979M Standard Practice for Sampling Bituminous Paving Mixtures
Street 41/Asphalt section
1. Roy Mobeen 2. Alfy Yassin 3. Kareem Ehab Nabil 4. Manjula Manoj Amunuwela Gedara 5. Piyal Kumara 6. Rizwan Majeedu 7. Mohammed Ghaffair Lijin Punnoli
62. 6.26 Asphalt ASTM D1188 Standard Test Method for Bulk Specific Gravity and Density of Compacted Bituminous Mixtures Using Coated Samples
Street 41/Asphalt section
1. Roy Mobeen 2. Alfy Yassin 3. Kareem Ehab Nabil 4. Manjula Manoj Amunuwela Gedara 5. Piyal Kumara 6. Rizwan Majeedu 7. Mohammed Ghaffair Lijin Punnoli
TL-343 Page 19 of 112 Arab Center for Engineering Studies ACES-Doha
PWA No. Category Standard/ Method
No. /Date Standard/Method Title &
Section Location /
Facility Authorized Technicians
63. 6.27 Asphalt ASTM D2041/D2041M
Standard Test Method for Theoretical Maximum Specific Gravity and Density of Bituminous Paving Mixtures
Street 41/Asphalt section
1. Ehab nabil abdelfattah fayed 2. Ndukaroy igwebueze 3. Walid taher abderahman diab 4. Alfie allauigan abenojar 5. M. H. Aslam 6. Mohamed razak mohamed rizwan 7. Abdquadri opeyemi bashorun 8. Yasir arafat 9. Bed bahadur thapa 10. Mohamed umar ansari 11. Birendra mahato nuniya 12. Adel bin qayoom 13. Rajanar(rj) 14. Carman 12. Alim 13. Madzwin
TL-343 Page 20 of 112 Arab Center for Engineering Studies ACES-Doha
PWA No. Category Standard/ Method
No. /Date Standard/Method Title &
Section Location /
Facility Authorized Technicians
64. 6.32 Asphalt ASTM D2172 Quantitative Extraction of bitumen from bituminous paving mixtures
Street 41/Asphalt section
1. Ehab nabil abdelfattah fayed 2. Piyal kumara pathirana nape 3. Ndukaroy igwebueze 4. Walid taher abderahman diab 5. Alfie allauigan abenojar 6. Khaleel ahmed 7. M. H. Aslam 8. Mohamed razak mohamed rizwan 9. Julbasir s. Kamdon 10. Salifou ndima'ah sufah 11. Peter olurotimi omoshuli 12. Abdquadri opeyemi bashorun 13. Edwin chikeh nwachukwu 14. Mohamed arafat mohideen pichchai 15. Julbasir s. Kamdon 16. Yasir arafat 17. Bed bahadur thapa 18. Mohamed umar ansari 19. Bhola nath jaisi poudel 20. Birendra mahato nuniya
TL-343 Page 21 of 112 Arab Center for Engineering Studies ACES-Doha
PWA No. Category Standard/ Method
No. /Date Standard/Method Title &
Section Location /
Facility Authorized Technicians
65. 6.25 Asphalt ASTM D2726/D2726M
Standard Test Method for Bulk Specific Gravity and Density of Non-Absorptive Compacted Bituminous Mixtures
Street 41/Asphalt section
1. Ehab nabil abdelfattah fayed 2. Ndukaroy igwebueze 3. Walid taher abderahman diab 4. Alfie allauigan abenojar 5. M. H. Aslam 6. Mohamed razak mohamed rizwan 7. Abdquadri opeyemi bashorun 8. Yasir arafat 9. Bed bahadur thapa 10. Mohamed umar ansari 11. Birendra mahato nuniya 12. Adel bin qayoom 13. Rajanar(rj) 14. Carman 12. Alim 13. Madzwin
66. Asphalt ASTM D3203/D3203M
Standard Test Method for Percent Air Voids in Compacted Dense and Open Bituminous Paving Mixtures
Street 41/Asphalt section
1. Ehab nabil abdelfattah fayed 2. Ndukaroy igwebueze 3.Walid taher abderahman diab 4. Alfie allauigan abenojar 5. M. H. Aslam 6. Mohamed razak mohamed rizwan 7. Abdquadri opeyemi bashorun 8. Yasir arafat 9. Bed bahadur thapa 10. Mohamed umar ansari 11. Birendra mahato nuniya 12. Adel bin qayoom 13. Rajanar(rj) 14. Carman 15. Alim 16. Madzwin
TL-343 Page 22 of 112 Arab Center for Engineering Studies ACES-Doha
PWA No. Category Standard/ Method
No. /Date Standard/Method Title &
Section Location /
Facility Authorized Technicians
67. 6.29 Asphalt ASTM D3549/D3549M
Thickness of Asphalt Specimen
Street 41/Asphalt section
1. Ehab nabil abdelfattah fayed 2. Ndukaroy igwebueze 3. Walid taher abderahman diab 4. Alfie allauigan abenojar 5. M. H. Aslam 6. Mohamed razak mohamed rizwan 7. Abdquadri opeyemi bashorun 8. Yasir arafat 9. Bed bahadur thapa 10. Mohamed umar ansari 11. Birendra mahato nuniya 12. Adel bin qayoom 13. Rajanar(rj) 14. Carman 12. Alim 13. Madzwin
68. 6.23 Asphalt ASTM D5361/D5361M
Standard Practice for Sampling Compacted Bituminous Mixtures for Laboratory Testing
Street 41/Asphalt section
1. Roy Mobeen 2. Alfy Yassin 3. Kareem Ehab Nabil 4. Manjula Manoj Amunuwela Gedara 5. Piyal Kumara 6. Rizwan Majeedu 7. Mohammed Ghaffair Lijin Punnoli
69. 6.31 Asphalt ASTM D5581 Resistance to Plastic Flow Using Marshall Apparatus (6 in. Specimen)
Street 41/Asphalt section
1. Roy Mobeen 2. Alfy Yassin 3. Kareem Ehab Nabil 4. Manjula Manoj Amunuwela Gedara 5. Piyal Kumara 6. Rizwan Majeedu 7. Mohammed Ghaffair Lijin Punnoli
TL-343 Page 23 of 112 Arab Center for Engineering Studies ACES-Doha
PWA No. Category Standard/ Method
No. /Date Standard/Method Title &
Section Location /
Facility Authorized Technicians
70. 6.33 Asphalt ASTM D6307 Standard Test Method for Asphalt Content of Hot-Mix Asphalt by Ignition Method
Street 41/Asphalt section
1. Roy Mobeen 2. Alfy Yassin 3. Kareem Ehab Nabil 4. Manjula Manoj Amunuwela Gedara 5. Piyal Kumara 6. Rizwan Majeedu 7. Mohammed Ghaffair Lijin Punnoli
71. Asphalt ASTM D6752/D6752M
Bulk Specific gravity of Compacted Bituminous samples
Street 41/Asphalt section
1. Ehab Nabil 2. Nduka Roy 3. Piyal Kumara 4. Alfie Abenjar Ansar Suco Kelum Mubeen Manazer 5. Mujahed Ansari Yannick Rizwan Nasar
72. 6.28 Asphalt ASTM D6857/D6857M
Maximum Specific Gravity and Density of Bituminous Paving Mixtures Using Automatic Vacuum Sealing Method
Street 41/Asphalt section
1. Ehab nabil abdelfattah fayed 2. Ndukaroy igwebueze 3. Walid taher abderahman diab 4. Alfie allauigan abenojar 5. M. H. Aslam 6. Mohamed razak mohamed rizwan 7. Abdquadri opeyemi bashorun 8. Yasir arafat 9. Bed bahadur thapa 10. Mohamed umar ansari 11. Birendra mahato nuniya 12. Adel bin qayoom 13. Rajanar(rj) 14. Carman 12. Alim 13. Madzwin
TL-343 Page 24 of 112 Arab Center for Engineering Studies ACES-Doha
PWA No. Category Standard/ Method
No. /Date Standard/Method Title &
Section Location /
Facility Authorized Technicians
73. 6.24 Asphalt ASTM D6926 Standard Practice for Preparation of Bituminous Specimens Using Marshall Apparatus
Street 41/Asphalt section
1. Ehab nabil abdelfattah fayed 2. Ndukaroy igwebueze 3. Walid taher abderahman diab 4. Alfie allauigan abenojar 5. M. H. Aslam 6. Mohamed razak mohamed rizwan 7. Abdquadri opeyemi bashorun 8. Yasir arafat 9. Bed bahadur thapa 10. Mohamed umar ansari 11. Birendra mahato nuniya 12. Adel bin qayoom 13. Rajanar(rj) 14. Carman 12. Alim 13. Madzwin
74. 6.30 Asphalt ASTM D6927 Standard Test Method for Marshall Stability and Flow of Bituminous Mixtures
Street 41/Asphalt section
1. Ehab nabil abdelfattah fayed 2. Ndukaroy igwebueze 3. Walid taher abderahman diab 4. Alfie allauigan abenojar 5. M. H. Aslam 6. Mohamed razak mohamed rizwan 7. Abdquadri opeyemi bashorun 8. Yasir arafat 9. Bed bahadur thapa 10. Mohamed umar ansari 11. Birendra mahato nuniya 12. Adel bin qayoom 13. Rajanar(rj) 14. Carman 12. Alim 13. Madzwin
TL-343 Page 25 of 112 Arab Center for Engineering Studies ACES-Doha
PWA No. Category Standard/ Method
No. /Date Standard/Method Title &
Section Location /
Facility Authorized Technicians
75. 6.40 Asphalt ASTM D6931 Standard Test Method for Indirect Tensile (IDT) Strength of Bituminous Mixtures
Street 41/Asphalt section
1. Ehab nabil abdelfattah fayed 2. Ndukaroy igwebueze 3. Walid taher abderahman diab 4. Alfie allauigan abenojar 5. M. H. Aslam 6. Mohamed razak mohamed rizwan 7. Abdquadri opeyemi bashorun 8. Yasir arafat 9. Bed bahadur thapa 10. Mohamed umar ansari 11. Birendra mahato nuniya 12. Adel bin qayoom 13. Rajanar(rj) 14. Carman 12. Alim 13. Madzwin
76. Asphalt ASTM D7227/ D7227 Rapid Drying of Compacted Asphalt Specimens Using Vacuum Drying Apparatus.
Street 41/Asphalt section
1. Ehab Nabil Abdelfattah Fayed 2. Nduka Roy Igwebueze 3. Piyal Kumara 4. Alfie Allauigan Abenojar 5. Ansar Suco 6. Kelum 7. Mubeen 8. Manazer 9. Mujahed Umar Ansari 10. Yannick 11. Rizwan Nasar
TL-343 Page 26 of 112 Arab Center for Engineering Studies ACES-Doha
PWA No. Category Standard/ Method
No. /Date Standard/Method Title &
Section Location /
Facility Authorized Technicians
77. Asphalt ASTM E965 Measuring Pavement Macrotexture Depth Using a Volumetric Technique
Street 41/Asphalt section
1. Roy Mobeen 2. Alfy Yassin 3. Kareem Ehab Nabil 4. Manjula Manoj Amunuwela Gedara 5. Piyal Kumara 6. Rizwan Majeedu 7. Mohammed Ghaffair Lijin Punnoli
78. 6.50 Asphalt BS EN 12697-1 Annex B.1.5
Bituminous mixtures — Test methods for hot mix asphalt (Soluble Binder Content)
Street 41/Asphalt section
1. Roy Mobeen 2. Alfy Yassin 3. Kareem Ehab Nabil 4. Manjula Manoj Amunuwela Gedara 5. Piyal Kumara 6. Rizwan Majeedu 7. Mohammed Ghaffair Lijin Punnoli
79. 6.52 Asphalt BS EN 12697-5 Proc. B
Bituminous mixtures -Test methods for hot mix asphalt Determination of Maximum Density (Hydrostatic procedure)
Street 41/Asphalt section
1. Roy Mobeen 2. Alfy Yassin 3. Kareem Ehab Nabil 4. Manjula Manoj Amunuwela Gedara 5. Piyal Kumara 6. Rizwan Majeedu 7. Mohammed Ghaffair Lijin Punnoli
80. 6.53 Asphalt BS EN 12697-6 Bituminous mixtures — Test methods for hot mix asphalt (Determination of Bulk Density of Bituminous Material)
Street 41/Asphalt section
1. Roy Mobeen 2. Alfy Yassin 3. Kareem Ehab Nabil 4. Manjula Manoj Amunuwela Gedara 5. Piyal Kumara 6. Rizwan Majeedu 7. Mohammed Ghaffair Lijin Punnoli
TL-343 Page 27 of 112 Arab Center for Engineering Studies ACES-Doha
PWA No. Category Standard/ Method
No. /Date Standard/Method Title &
Section Location /
Facility Authorized Technicians
81. 6.54 Asphalt BS EN 12697-8 Bituminous mixtures — Test methods for hot mix asphalt (Determination of Voids Characteristics of Bituminous Specimens)
Street 41/Asphalt section
1. Roy Mobeen 2. Alfy Yassin 3. Kareem Ehab Nabil 4. Manjula Manoj Amunuwela Gedara 5. Piyal Kumara 6. Rizwan Majeedu 7. Mohammed Ghaffair Lijin Punnoli
82. 6.55 Asphalt BS EN 12697-9 Determination of the reference density
Street 41/Asphalt section
1. Roy Mobeen 2. Alfy Yassin 3. Kareem Ehab Nabil 4. Manjula Manoj Amunuwela Gedara 5. Piyal Kumara 6. Rizwan Majeedu 7. Mohammed Ghaffair Lijin Punnoli
83. 6.56 Asphalt BS EN 12697-13 Temperature measurement Street 41/Asphalt section
1. Roy Mobeen 2. Alfy Yassin 3. Kareem Ehab Nabil 4. Manjula Manoj Amunuwela Gedara 5. Piyal Kumara 6. Rizwan Majeedu 7. Mohammed Ghaffair Lijin Punnoli
84. 6.64 Asphalt BS EN 12697-23 Determination of the indirect tensile strength of bituminous specimens
Street 41/Asphalt section
1. Roy Mobeen 2. Alfy Yassin 3. Kareem Ehab Nabil 4. Manjula Manoj Amunuwela Gedara 5. Piyal Kumara 6. Rizwan Majeedu 7. Mohammed Ghaffair Lijin Punnoli
TL-343 Page 28 of 112 Arab Center for Engineering Studies ACES-Doha
PWA No. Category Standard/ Method
No. /Date Standard/Method Title &
Section Location /
Facility Authorized Technicians
85. 6.47 Asphalt BS EN 12697-27 Sampling of Asphalt Measurement
Street 41/Asphalt section
1. Roy Mobeen 2. Alfy Yassin 3. Kareem Ehab Nabil 4. Manjula Manoj Amunuwela Gedara 5. Piyal Kumara 6. Rizwan Majeedu 7. Mohammed Ghaffair Lijin Punnoli
86. 6.48 Asphalt BS EN 12697-28 Preparation of Samples for Determining Binder Content, Water Content & Grading
Street 41/Asphalt section
1. Roy Mobeen 2. Alfy Yassin 3. Kareem Ehab Nabil 4. Manjula Manoj Amunuwela Gedara 5. Piyal Kumara 6. Rizwan Majeedu 7. Mohammed Ghaffair Lijin Punnoli
87. 6.57 Asphalt BS EN 12697-29 Bituminous mixtures — Test methods for hot mix asphalt (Determination of dimensions of Bituminous Specimens)
Street 41/Asphalt section
1. Roy Mobeen 2. Alfy Yassin 3. Kareem Ehab Nabil 4. Manjula Manoj Amunuwela Gedara 5. Piyal Kumara 6. Rizwan Majeedu 7. Mohammed Ghaffair Lijin Punnoli
88. 6.49 Asphalt BS EN 12697-30 Specimen Preparation by Impact Compactor
Street 41/Asphalt section
1. Roy Mobeen 2. Alfy Yassin 3. Kareem Ehab Nabil 4. Manjula Manoj Amunuwela Gedara 5. Piyal Kumara 6. Rizwan Majeedu 7. Mohammed Ghaffair Lijin Punnoli
TL-343 Page 29 of 112 Arab Center for Engineering Studies ACES-Doha
PWA No. Category Standard/ Method
No. /Date Standard/Method Title &
Section Location /
Facility Authorized Technicians
89. 6.58 Asphalt BS EN 12697-34 Marshall Test Street 41/Asphalt section
1. Roy Mobeen 2. Alfy Yassin 3. Kareem Ehab Nabil 4. Manjula Manoj Amunuwela Gedara 5. Piyal Kumara 6. Rizwan Majeedu 7. Mohammed Ghaffair Lijin Punnoli
90. 6.59 Asphalt BS EN 12697-35 Bituminous mixtures -Test methods for hot mix asphalt (Laboratory Mixing)
Street 41/Asphalt section
1. Roy Mobeen 2. Alfy Yassin 3. Kareem Ehab Nabil 4. Manjula Manoj Amunuwela Gedara 5. Piyal Kumara 6. Rizwan Majeedu 7. Mohammed Ghaffair Lijin Punnoli
91. 6.60 Asphalt BS EN 12697-36 Bituminous mixtures - Test methods for hot mix asphalt (Determination of the thickness of a bituminous pavement (Specimen))
Street 41/Asphalt section
1. Roy Mobeen 2. Alfy Yassin 3. Kareem Ehab Nabil 4. Manjula Manoj Amunuwela Gedara 5. Piyal Kumara 6. Rizwan Majeedu 7. Mohammed Ghaffair Lijin Punnoli
92. 6.61 Asphalt BS EN 12697-39 Binder Content by Ignition Street 41/Asphalt section
1. Roy Mobeen 2. Alfy Yassin 3. Kareem Ehab Nabil 4. Manjula Manoj Amunuwela Gedara 5. Piyal Kumara 6. Rizwan Majeedu 7. Mohammed Ghaffair Lijin Punnoli
TL-343 Page 30 of 112 Arab Center for Engineering Studies ACES-Doha
PWA No. Category Standard/ Method
No. /Date Standard/Method Title &
Section Location /
Facility Authorized Technicians
93. 6.99 Asphalt QCS 2014 CL 06-05 Paragraph 16
Retained Stability (Per ASTM D6927 or ASTM D5581)
Street 41/Asphalt section
1. Ehab Nabil Abdelfattah Fayed 2. Nduka Roy 3. Sembo Tamong Kasimee 4. Khaleel Ahmed 5. Aslam 6. Yum Kumar 7. Rizwan 8. Mohammed Anees 9. Mohammed Assam 10. Alfie A Abenojar. 11. Yannick 12. Tohidul Islam 13. anjula 14. Hisham 15. Deependra 16. Mourad Zrelli 17. Ashok Baniya 18. Madzwin Iddo 19. Amir Hassan 20. Manazir 21. Subana 22. Ashraf 23. Kamal 24. Gaffar 25. Ansar 26. Azeem 27. Rizwan 28. Kareem
94. Asphalt SP-2 & AASHTO R35 Standard Practice for Superpave Volumetric Design for Asphalt Mixtures (Superpave Mix Design)
Street 41/Asphalt section
1. Roy Mobeen 2. Alfy Yassin 3. Kareem Ehab Nabil 4. Manjula Manoj Amunuwela Gedara 5. Piyal Kumara 6. Rizwan Majeedu 7. Mohammed Ghaffair Lijin Punnoli
TL-343 Page 31 of 112 Arab Center for Engineering Studies ACES-Doha
PWA No. Category Standard/ Method
No. /Date Standard/Method Title &
Section Location /
Facility Authorized Technicians
95. Building Acoustics
BS EN ISO 140-3 Laboratory measurement of airborne sound insulation of building elements
Street 41/Main Lab
1- Mohamed Jamal Abd El-Rady 2-Ahmed Mahmoud Rashid 3- Sujan Shrestha 4- Arif Husain
96. Building Acoustics
BS EN ISO 140-4 Field measurements of airborne sound insulation between rooms
Street 41/Main Lab
1- Mohamed Jamal Abd El-Rady 2-Ahmed Mahmoud Rashid 3- Sujan Shrestha 4- Arif Husain
97. Cementitious Materials
ASTM C109/C109M and ASTM C311/ C311M CL 29
Standard Test Method for Compressive Strength of Hydraulic Cement Mortars (Using 2-in. or [50-mm] Cube Specimens)
Street 41/Cement Section
Exequiel Santos, Glenn Oliveroos, Michael Agora Abdel Hakam
98. Cementitious Materials
ASTM C151/C151M Autoclave Expansion of Hydraulic Cement
Street 41/Cement Section
1. Michael cahigan agora 2. Glenn oliveros, 3. Jerry Jr Pernito Beter
99. 5.2 Cementitious Materials
ASTM C183/C183M Sampling and the Amount of Testing of Hydraulic Cement
Street 41/Cement Section
1. Michael Agora, 2. Glenn oliveros, 3. Abdel hakam Endih
100. Cementitious Materials
ASTM C185 Standard Test Method for Air Content of Hydraulic Cement Mortar
Street 41/Cement Section
1. Michael cahigan agora 2. Glenn oliveros
101. 5.17 Cementitious Materials
ASTM C187 Standard Test Method for Amount of Water Required for Normal Consistency of Hydraulic Cement Paste
Street 41/Cement Section
1. Michael cahigan agora 2. Glenn oliveros, 3. Jerry Jr Pernito Beter
102. Cementitious Materials
ASTM C188 and ASTM C311/C311M CL 19
Standard Test Method for Density of Hydraulic Cement
Street 41/Cement Section
1. Exequiel Santos 2. Glenn Oliveroos 3. Michael Agora 4. Abdel Hakam
103. 5.16 Cementitious Materials
ASTM C191 Time of Setting of Hydraulic Cement by Vicat Needle
Street 41/Cement Section
1. Glenn Oliveroos, 2. Michael Agora 3. Abdel Hakam
104. Cementitious Materials
ASTM C204 Method A
Standard Test Methods for Fineness of Hydraulic Cement by Air-Permeability Apparatus
Street 41/Cement Section
1. Michael cahigan agora 2. Glenn oliveros
TL-343 Page 32 of 112 Arab Center for Engineering Studies ACES-Doha
PWA No. Category Standard/ Method
No. /Date Standard/Method Title &
Section Location /
Facility Authorized Technicians
105. 5.25 Cementitious Materials
ASTM C311/C311M CL 11-13
Standard Test Methods for Sampling and Testing Fly Ash or Natural Pozzolans for Use in Portland-Cement Concrete (Moisture Content)
Street 41/Cement Section
1. Jerry Jr Pernito Beter 2. Exequiel Victorino Santos 3. Michael Cahigan Agora 4. Glenn Oliveros 5. Abolaji Ishaq Okunola 6. Mohammed Sanaf Bavikkara Moideenkunhi 7. Hatta Sappal Amud
106. 5.4 Cementitious Materials
ASTM C349 Compressive Strength of Hydraulic-Cement Mortars (Using Portions of Prisms Broken in Flexure)
Street 41/Cement Section
1. Exequiel Santos, 2. Glenn Oliveroos, 3. Michael Agora
107. Cementitious Materials
ASTM C430 and ASTM C311/C311M CL 20
Standard Test Method for Fineness of Hydraulic Cement by the 45-μm (No. 325) Sieve
Street 41/Cement Section
1. Michael Cahigan Agora 2. Glenn Oliveros
108. 5.22 Cementitious Materials
ASTM C989-Appendix XI
Compressive Strength for ground Granulated Blast Furnace slag
Street 41/Cement Section
1. Michael cahigan agora 2. Glenn oliveros
109. 5.26 Cementitious Materials
ASTM C1012/C1012M and ASTM C311/C311M CL 34
Standard Test Method for Length Change of Hydraulic-Cement Mortars Exposed to a Sulfate Solution
Street 41/Cement Section
1. Michael cahigan agora 2. Glenn oliveros
110. 5.23 Cementitious Materials
ASTM C1240-15 Pozzolanic Activity Test Street 41/ Cement Section
Glenn oliveros Exiquiel santos Michael agora Robert villas
111. Cementitious Materials
ASTM C1437 Standard Test Method for Flow of Hydraulic Cement Mortar
Street 41/Cement Section
1. Michael Cahigan Agora 2. Glenn Oliveros
112. 5.24 Cementitious Materials
ASTM D5759 Characterization of fly ash for potential uses
Street 41/Cement Section
1. Michael cahigan agora 2. Glenn oliveros
113. 1.31 Cementitious Materials
BS 1924-2 CL 2.1.5 Stabilized materials for civil engineering purposes Part 2: Methods of test for cement-stabilized and lime- stabilized materials 'Method using vibratory compaction'
Street 41/Cement Section
1. Michael Cahigan Agora 2. Glenn Oliveros
TL-343 Page 33 of 112 Arab Center for Engineering Studies ACES-Doha
PWA No. Category Standard/ Method
No. /Date Standard/Method Title &
Section Location /
Facility Authorized Technicians
114. 1.31 Cementitious Materials
BS 1924-2 CL 4.2 & 4.3
Stabilized materials for civil engineering purposes Part 2: Methods of test for cement-stabilized and lime- stabilized materials 'Determination of the compressive strength of cubic specimens'
Street 41/Cement Section
1. Michael Cahigan Agora 2. Glenn Oliveros
115. 5.3 Cementitious Materials
BS EN 196-1 Methods of testing cement (Determination of Strength)
Street 41/Cement Section
1. Exequiel Santos, 2. Glenn Oliveroos, 3. Michael Agora
116. 5.10 Cementitious Materials
BS EN 196-2-CL 13.2&3
Impure Silica Content Street 41/ Chemical Section
1. Saleem Kalathil 2. Muneer MC
117. 5.12 Cementitious Materials
BS EN 196-2 CL 13.9 Total Silica Content Street 41/ Chemical Section
1. Saleem Kalathil 2. Muneer MC
118. 5.14 Cementitious Materials
BS EN 196-3:2005 + A1 CL 6 and Annex A
Methods of testing cement, Determination of setting times and soundness (Determination of Setting Time of cement)
Street 41/Cement Section
1. Michael Agora, 2. Glenn oliveros, 3. Abdel hakam Endih
119. 5.15 Cementitious Materials
BS EN 196-3 CL 7 Determination of Soundness of cement
Street 41/Cement Section
1. Exequiel Santos, 2. Glenn Oliveroos, 3. Michael Agora 4. Abdel Hakam
120. 5.21 Cementitious Materials
BS EN 196-6 Determination of Fineness of cement
Street 41/Cement Section
1. Michael cahigan agora 2. Glenn oliveros
121. 5.1 Cementitious Materials
BS EN 196-7 Taking and Preparing Samples of Cement
Street 41/Cement Section
1. Michael Agora, 2. Glenn oliveros, 3. Abdel hakam Endih
122. 2.9 Chemistry (Soil, Aggregate, Concrete, Cement)
ASTM C40/C40M Standard Test Method for Organic Impurities in Fine Aggregates for Concrete
Street 41/ Chemical section
1. Saleem Kalathil 2. Khaled Imam Abdellah Moumene
123. Chemistry (Soil, Aggregate, Concrete, Cement)
ASTM C289 Standard Test Method for Potential Alkali-Silica Reactivity of Aggregates (Chemical Method)
Street 41/ Chemical section
Khalid Imam Saleem Kalathil
TL-343 Page 34 of 112 Arab Center for Engineering Studies ACES-Doha
PWA No. Category Standard/ Method
No. /Date Standard/Method Title &
Section Location /
Facility Authorized Technicians
124. Chemistry (Soil, Aggregate, Concrete, Cement)
ASTM C494/494 CL 18.2-16
Standard Specification for Chemical Admixtures for Concrete (Oven Dry Residue of Admixture)
Street 41/ Chemical section
Khalid Imam Saleem Kalathil
125. Chemistry (Soil, Aggregate, Concrete, Cement)
ASTM C494/494 CL 18.4-16
Standard Specification for Chemical Admixtures for Concrete (Specific gravity of Admixture)
Street 41/ Chemical section
Khalid Imam Saleem Kalathil
126. 3.10 Chemistry (Soil, Aggregate, Concrete, Cement)
ASTM C1152 Acid Soluble Chloride in Concrete
Street 41/ Chemical section
1. Ahmed 2. Van Soriano, 3. Thanveer Cresent House Daylo Abante
127. 3.9 Chemistry (Soil, Aggregate, Concrete, Cement)
ASTM C1218 Water Soluble Chloride in Concrete
Street 41/ Chemical section
1. Ahmed 2. Van Soriano 3. Thanveer Cresent House
128. 1.25 Chemistry (Soil, Aggregate, Concrete, Cement)
BS 1377-3 CL 3 Determination of the organic matter content
Street 41/ Chemical section
1. Saleem Kalathil 2. Abdellah Moumene
129. 1.29 Chemistry (Soil, Aggregate, Concrete, Cement)
BS 1377-3 CL 5.2 Determination of sulphate content of soil- Acid Soluble Extract
Street 41/ Chemical section
1. Khaled Imam Abdellah Moumene 2. Saleem Kalathil,
130. 1.28 Chemistry (Soil, Aggregate, Concrete, Cement)
BS 1377-3 CL 5.3 & 5.5
Methods of test for Soils for civil engineering purposes — Chemical and electro- chemical tests (Determination of sulphate content of soil- Water Soluble Extract)
Street 41/ Chemical section
1. Saleem Kalathil 2. Meethale Chakkoli Muneer 3. Abdellah Moumene
131. Chemistry (Soil, Aggregate, Concrete, Cement)
BS 1377-3 CL 6.3 Methods of test for Soils for civil engineering purposes — Chemical and electro-chemical tests (Determination of the carbonate content)
Street 41/ Chemical section 1. Saleem Kalathil
2. Meethale Chakkoli Muneer 3. Abdellah Moumene
TL-343 Page 35 of 112 Arab Center for Engineering Studies ACES-Doha
PWA No. Category Standard/ Method
No. /Date Standard/Method Title &
Section Location /
Facility Authorized Technicians
132. 1.26 Chemistry (Soil, Aggregate, Concrete, Cement)
BS 1377-3 CL 7.2 Methods of test for Soils for civil engineering purposes — Chemical and electro- chemical tests (Determination of water- soluble chloride content)
Street 41/ Chemical section
1. Saleem Kalathil 2. Meethale Chakkoli Muneer 3. Abdellah Moumene
133. 1.27 Chemistry (Soil, Aggregate, Concrete, Cement)
BS 1377-3 CL 7.3 Methods of test for Soils for civil engineering purposes — Chemical and electro- chemical tests (Determination of acid- soluble chloride content)
Street 41/ Chemical section
1. Saleem Kalathil 2. Meethale Chakkoli Muneer 3. Abdellah Moumene
134. Chemistry (Soil, Aggregate, Concrete, Cement)
BS 1377-3 CL 9 Methods of test for Soils for civil engineering purposes — Chemical and electro- chemical tests (Determination of the pH value)
Street 41/ Chemical section
1. Saleem Kalathil 2. Meethale Chakkoli Muneer 3. Abdellah Moumene
135. 3.33 Chemistry (Soil, Aggregate, Concrete, Cement)
BS 1881-124 CL 10.2
Determination of chloride content
Street 41/ Chemical section
1. Ahmed 2. Van Soriano, 3. Thanveer Cresent House Daylo Abante
136. 3.34 Chemistry (Soil, Aggregate, Concrete, Cement)
BS 1881-124 CL 10.3
Determination of sulphate content
Street 41/ Chemical section
1. Ahmed 2. Van Soriano, 3. Thanveer Cresent House Daylo Abante
137. Chemistry (Soil, Aggregate, Concrete, Cement)
BS EN 196-2 Chemical analysis for cement Street 41/ Chemical section
1. Tanveer Sarwar Saleem Khalid Imam
138. 5.9 Chemistry (Soil, Aggregate, Concrete, Cement)
BS EN 196-2 CL 4.4.1
Determination of loss on ignition
Street 41/ Chemical section
1. Mohamed Sarwar Rajput 2. Saleem Kalathil
139. Chemistry (Soil, Aggregate, Concrete, Cement)
BS EN 196-2 CL 4.4.2
Method of testing cement Chemical analysis of cement (Determination of sulfate)
Street 41/ Chemical section
1. Mohamed Sarwar Rajput 2. Thanveer Cresent House
TL-343 Page 36 of 112 Arab Center for Engineering Studies ACES-Doha
PWA No. Category Standard/ Method
No. /Date Standard/Method Title &
Section Location /
Facility Authorized Technicians
140. Chemistry (Soil, Aggregate, Concrete, Cement)
BS EN 196-2 CL 4.4.3
Method of testing cement Chemical analysis of cement (Determination of residue insoluble in hydrochloric acid and sodium carbonate)
Street 41/ Chemical section
1. Mohamed Sarwar Rajput 2. Thanveer Cresent House
141. Chemistry (Soil, Aggregate, Concrete, Cement)
BS EN 196-2 CL 4.5.5
Decomposition with hydrochloric acid and ammonium chloride and precipitation of silica (alternative method)
Street 41/ Chemical section
1. Mohamed Sarwar Rajput 2. Thanveer Cresent House
142. 5.11 Chemistry (Soil, Aggregate, Concrete, Cement)
BS EN 196-2 CL 4.5.6
Determination of pure silica Street 41/ Chemical section
1. Mohamed Sarwar Rajput 2. Thanveer Cresent House
143. 5.8 Chemistry (Soil, Aggregate, Concrete, Cement)
BS EN 196-2 CL 4.5.10
Method of testing cement Chemical analysis of cement (Determination of Ferric Oxide Content)
Street 41/ Chemical section
1. Mohamed Sarwar Rajput 2. Thanveer Cresent House
144. 5.7 Chemistry (Soil, Aggregate, Concrete, Cement)
BS EN 196-2 CL 4.5.11
Method of testing cement Chemical analysis of cement (Determination of Aluminum Oxide Content)
Street 41/ Chemical section
1. Mohamed Sarwar Rajput 2. Thanveer Cresent House
145. 5.5 Chemistry (Soil, Aggregate, Concrete, Cement)
BS EN 196-2 CL 4.5.14
Determination of calcium oxide by EDTA (alternative method)
Street 41/ Chemical section
1. Mohamed Sarwar Rajput 2. Thanveer Cresent House
146. 5.6 Chemistry (Soil, Aggregate, Concrete, Cement)
BS EN 196-2 CL 4.5.15
Determination of magnesium oxide by EDTA (alternative method)
Street 41/ Chemical section
1. Mohamed Sarwar Rajput 2. Thanveer Cresent House
147. 5.19 Chemistry (Soil, Aggregate, Concrete, Cement)
BS EN 196-2 CL 4.5.16
Method of testing cement Chemical analysis of cement (Chloride Content)
Street 41/ Chemical section
1. Mohamed Sarwar Rajput 2. Saleem Kalathil
148. 5.13 Chemistry (Soil, Aggregate, Concrete, Cement)
BS EN 196-2 CL 4.5.19
Method of testing cement. Chemical analysis of cement (Alkalies Content)
Street 41/ Chemical section
1. Saleem Kalathil 2. Abdellah Moumene Mohamed
TL-343 Page 37 of 112 Arab Center for Engineering Studies ACES-Doha
PWA No. Category Standard/ Method
No. /Date Standard/Method Title &
Section Location /
Facility Authorized Technicians
149. Chemistry (Soil, Aggregate, Concrete, Cement)
BS EN 933-9+A1 Tests for geometrical properties of aggregates- Assessment of fines- Methylene blue test
Street 41/ Chemical section
1. Saleem Kalathil 2. Khaled Imam Abdellah Moumene
150. 2.40 Chemistry (Soil, Aggregate, Concrete, Cement)
BS EN 1744-1 CL 12+A1
Determination of acid soluble sulphates
Street 41/ Chemical section
1. Thanveer Cresent House Khalid Imam 2. Saleem Kalathil, 3. Abdellah Moumene
151. 2.36 Chemistry (Soil, Aggregate, Concrete, Cement)
BS EN 1744-5 Tests for chemical properties of aggregates (Determination of acid soluble chloride content)
Street 41/ Chemical section
1. Saleem Kalathil 2. Khaled Imam Abdellah Moumene
152. 3.1 Concrete ASTM C31/C31M Making and Curing of Concrete Tests Specimen
Street 41/Concrete Section
1-Kapur Mohan Tamang
153. 3.5 Concrete ASTM C39 Standard Test Method for Compressive Strength of Cylindrical Concrete Specimens
Street 41/Concrete Section
1. Govinda Giri 2. Salman Ansari 3. Kimhar Juhaini
154. 3.8 Concrete ASTM C42 Obtaining and Testing of Drilled Cores and Sawed Beams
Street 41/Concrete Section
1-Kapur Mohan Tamang
155. 3.14 Concrete ASTM C138/C138M Density (Unit Weight), Yield, and Air Content (Gravimetric) of Concrete
Street 41/Concrete Section
1. Samy Tawfik Gad 2. Okoye Onyeka Etien 3. Victor, 4. Sudeesh Sudhakran
156. 3.4 Concrete ASTM C143/C143M Flat Particles, Elongated Particles, or Flat and Elongated Particles in Coarse Aggregate
Street 41/Concrete Section
1. Samy Tawfik Gad, 2. Okoye Onyeka Etien, 3. Kimhar Dugasan Juaini 4. Sudeesh Sudhakaran
157. 3.2 Concrete ASTM C172/C172M Standard Practice for Sampling Freshly Mixed Concrete (Sampling of Fresh Concrete)
Street 41/Concrete Section
1-Samy Tawfik 2-Okoye Onyeka Etien 3-Victor, 4-Sudeesh Sudhakran
158. Concrete ASTM C192/C192M Standard Practice for Making and Curing Concrete Test Specimens in the Laboratory
Street 41/Concrete Section
1. Mirendra dhital 2. Abdul qader mohamed irfan, 3. Govinda giri 4. Salaman Ansari
TL-343 Page 38 of 112 Arab Center for Engineering Studies ACES-Doha
PWA No. Category Standard/ Method
No. /Date Standard/Method Title &
Section Location /
Facility Authorized Technicians
159. 3.12 Concrete ASTM C231/C231M Standard Test Method for Air Content Test for Fresh Concrete by Pressure Method, (Type B)
Street 41/Concrete Section
1. Samy Tawfik Gad, 2. Okoye Onyeka Etien, 3. Victor, 4. Sudeesh Sudhakran
160. Concrete ASTM C232/C232M Standard Test Methods for Bleeding of Concrete
Street 41/Concrete Section
1. Samy Tawfik Gad 2. Sharabin Kelum 3. Nishantha Arangala Pathirage 4. Okoye Onyeka Etien 5. Randy Vidad 6. Saju Tharulli 7. Antony Aneesh Babu
161. 3.6 Concrete ASTM C617/C617M Capping of Concrete Cylindrical Specimen
Street 41/Concrete Section
1. Kapur Mohan Tamang 2. Safar Uddin Miya
162. 3.3 Concrete ASTM C1064/C1064M
Test for Temperature of Fresh Concrete
Street 41/Concrete Section
1. Samy Tawfik Gad Sharabin Kelum 2. Nishantha Arangala Pathirage 3. Okoye Onyeka Etien Randy Vidad 4. Saju Tharulli Antony Aneesh Babu
163. 3.11 Concrete ASTM C 1202 Standard Test Method for Electrical Indication of Concrete’s Ability to Resist Chloride Ion Penetration (Resistance to Chloride Ion Penetration (RCP))
Street 41/Concrete Section
1-Kapur Mohan Tamang 2-Safar Miya 3-Hik Bahadur Tamang 4-Rom Bahadur Ale
164. 3.7 Concrete ASTM C1231/C1231M
Standard Practice for Use of Unbonded Caps in Determination of Compressive Strength of Hardened Concrete Cylinders
Street 41/Concrete Section
1-Mirendra dhital, 2-Abdul qader mohamed irfan, 3-Govinda giri
165. 3.15 Concrete ASTM C1385/C1385M
Sampling of Shotcrete Street 41/Concrete Section
1. Samy Tawfik Gad Sharabin Kelum 2. Nishantha Arangala Pathirage 3. Okoye Onyeka
TL-343 Page 39 of 112 Arab Center for Engineering Studies ACES-Doha
PWA No. Category Standard/ Method
No. /Date Standard/Method Title &
Section Location /
Facility Authorized Technicians
166. Concrete ASTM C1604/C1604M-
Standard Test Method for Obtaining and Testing Drilled Cores of Shotcrete
Street 41/Concrete Section
1. Mirendra dhital 2. Abdul qader mohamed irfan, 3. Govinda giri 4. Kapoor Tamong
167. 3.19 Concrete ASTM C1611/C1611M
Slump Flow of Self- Consolidating Concrete
Street 41/Concrete Section
1. Samy Tawfik Gad 2. Okoye Onyeka Etien, 3. Victor, 4. Sudeesh Sudhakran
168. 3.20 Concrete ASTM C1621/C1621M
Standard Test Method for Passing Ability of Self- Consolidating Concrete by J-Ring
Street 41/Concrete Section
1. Samy Tawfik Gad 2. Okoye Onyeka Etien, 3. Victor, 4. Sudeesh Sudhakran
169. 3.17 Concrete ASTM C1688/C1688M
Density Determination of Pervious Concrete
Street 41/Concrete Section
1. Samy Tawfik Gad 2. Sharabin Kelum N 3. Ishantha Arangala Pathirage 4. Okoye Onyeka
170. 3.18 Concrete ASTM C1701/C1701M
Infiltration Test for In place Pervious Concrete
Street 41/Concrete Section
1. Samy Tawfik Gad 2. Sharabin Kelum N 3. Ishantha Arangala Pathirage 4. Okoye Onyeka
171. 3.30 Concrete BS 1881-122 Method of Determination of Water Absorption
Street 41/Concrete Section
1. Kapur Mohan Tamang
172. 3.31 Concrete BS 1881-208 Initial Surface Absorption (ISAT)
Street 41/Concrete Section
1. Kapur Mohan Tamang
173. 3.21 Concrete BS EN 12350-1 Testing fresh concrete (Sampling of Fresh Concrete)
Street 41/Concrete Section
1. Samy Tawfik Gad 2. Okoye Onyeka Etien, 3. Victor, 4. Sudeesh Sudhakran
TL-343 Page 40 of 112 Arab Center for Engineering Studies ACES-Doha
PWA No. Category Standard/ Method
No. /Date Standard/Method Title &
Section Location /
Facility Authorized Technicians
174. 3.23 Concrete BS EN 12350-2 Testing fresh concrete (Slump Test of Fresh Concrete)
Street 41/Concrete Section
1. Samy Tawfik Gad 2. Sharabin Kelum 3. Nishantha Arangala Pathirage 4. Okoye Onyeka Etien 5. Randy Vidad 6. Saju Tharulli 7. Antony Aneesh Babu
175. Concrete BS EN 12350-3 Testing fresh concrete (Vebe test)
Street 41/Concrete Section
1. Samy Tawfik Gad 2. Sharabin Kelum 3. Nishantha Arangala Pathirage 4. Okoye Onyeka Etien 5. Randy Vidad 6. Saju Tharulli 7. Antony Aneesh Babu
176. Concrete BS EN 12350-4 Testing fresh concrete (Degree of compatibility)
Street 41/Concrete Section
1. Samy Tawfik Gad 2. Sharabin Kelum 3. Nishantha Arangala Pathirage 4. Okoye Onyeka Etien 5. Randy Vidad 6. Saju Tharulli 7. Antony Aneesh Babu
177. 3.24 Concrete BS EN 12350-5 Testing fresh concrete (Flow Table Test)
Street 41/Concrete Section
1. Samy Tawfik Gad 2. Sharabin Kelum 3. Nishantha Arangala Pathirage 4. Okoye Onyeka Etien 5. Randy Vidad 6. Saju Tharulli 7. Antony Aneesh Babu
178. Concrete BS EN 12350-6 Testing fresh concrete (Testing fresh concrete Density)
Street 41/Concrete Section
1. Samy Tawfik Gad 2. Sharabin Kelum 3. Nishantha Arangala Pathirage 4. Okoye Onyeka Etien 5. Randy Vidad 6. Saju Tharulli 7. Antony Aneesh Babu
TL-343 Page 41 of 112 Arab Center for Engineering Studies ACES-Doha
PWA No. Category Standard/ Method
No. /Date Standard/Method Title &
Section Location /
Facility Authorized Technicians
179. Concrete BS EN 12350-7 Testing fresh concrete (Testing fresh concrete Air content. Pressure methods)
Street 41/Concrete Section
1. Samy Tawfik Gad 2. Sharabin Kelum 3. Nishantha Arangala Pathirage 4. Okoye Onyeka Etien 5. Randy Vidad 6. Saju Tharulli 7. Antony Aneesh Babu
180. Concrete BS EN 12350-8 Slump Flow Test for self compacted Concrete
Street 41/Concrete Section
1. Samy Tawfik Gad 2. Sharabin Kelum 3. Nishantha Arangala Pathirage 4. Okoye Onyeka Etien 5. Randy Vidad 6. Saju Tharulli 7. Antony Aneesh Babu
181. 3.35 Concrete EN 12350-9 V-Funnel Test for self Compaction Concrete
Street 41/Concrete Section
1. Samy Tawfik Gad 2. Sharabin Kelum 3. Nishantha Arangala Pathirage 4. Okoye Onyeka Etien 5. Randy Vidad 6. Saju Tharulli 7. Antony Aneesh Babu
182. 3.36 Concrete BS EN 12350-10 L- Box Shap Test for Self Compaction Concrete
Street 41/Concrete Section
1. Samy Tawfik Gad 2. Sharabin Kelum 3. Nishantha Arangala Pathirage 4. Okoye Onyeka Etien 5. Randy Vidad 6. Saju Tharulli 7. Antony Aneesh Babu
183. Concrete BS EN 12350-11 Sieve Segregation test for Self Compaction Concrete
Street 41/Concrete Section
1. Samy Tawfik Gad 2. Sharabin Kelum 3. Nishantha Arangala Pathirage 4. Okoye Onyeka Etien 5. Randy Vidad 6. Saju Tharulli 7. Antony Aneesh Babu
TL-343 Page 42 of 112 Arab Center for Engineering Studies ACES-Doha
PWA No. Category Standard/ Method
No. /Date Standard/Method Title &
Section Location /
Facility Authorized Technicians
184. 3.25 Concrete BS EN 12390-1 Shape and Dimensions of Specimen
Street 41/Concrete Section
1. Mirendra dhital, 2. Abdul qader mohamed irfan 3. Govinda giri 4. Salaman Ansari
185. 3.22 Concrete BS EN 12390-2 Making and Curing of Specimen for Strength Test
Street 41/Concrete Section
1. Mirendra dhital, 2. Samy Tawfik Gad
186. 3.26 Concrete BS EN 12390-3 Annex B
Compressive Strength of Test Specimens
Street 41/Concrete Section
1. Mirendra dhital, 2. Abdul qader mohamed irfan 3. Govinda giri 4. Salaman Ansari
187. Concrete BS EN 12390-5 Annex A
Testing hardened concrete (Flexural strength of test specimens)
Street 41/Concrete Section
1. Mirendra dhital 2. Abdul qader mohamed irfan 3. Govinda giri 4. Salaman Ansari
188. Concrete BS EN 12390-6 Testing hardened concrete (Tensile splitting strength of test specimens)
Street 41/Concrete Section
1. Mirendra dhital 2. Abdul qader mohamed irfan, 3. Govinda giri 4. Salaman Ansari
189. 3.27 Concrete BS EN 12390-7 Density of Hardened Concrete
Street 41/Concrete Section
1. Mirendra dhital, 2. Abdul qader mohamed irfan 3. Govinda giri 4. Salaman Ansari
190. 3.29 Concrete BS EN 12390-8 Water Penetration Test Street 41/Concrete Section
1. Kapur Mohan Tamang
191. 3.28 Concrete EN 12504-1 (E) Obtaining and Testing of Drilled Cores
Street 41/Concrete Section
1. Kapur Mohan Tamang
192. Concrete DIN 1048-5 Method of determination of Water Penetration
Street 41/Concrete Section
1. Kapur Mohan Tamang
TL-343 Page 43 of 112 Arab Center for Engineering Studies ACES-Doha
PWA No. Category Standard/ Method
No. /Date Standard/Method Title &
Section Location /
Facility Authorized Technicians
193. 3.32 Concrete NT Build 492 Chloride Migration Coefficient / Chloride Penetration Test
Street 41/Concrete Section
1. Kapur Mohan Tamang
194. Concrete QCS2014 CL5-6 and ASTM C1064 / C1064M
Concrete Temperature Monitoring by using Thermocouples
Street 41/Concrete Section
1. Alexis Legaspi Lorica 2. Al Quin Teopaco Batu
195. Cosmetics AOAC Official Method 951.04
Chlorides in Deodorants Gravimetric Method
Street 41 / Chemical section
1. Saleem Kalathil 2. Meethale Chakkoth Muneer
196. Cosmetics AOAC Official Method 951.05
Sulfates in Deodorants Gravimetric Method
Street 41 / Chemical section
1. Saleem Kalathil 2. Meethale Chakkoth Muneer
197. Dimension Stone
ASTM C97/C97M Standard Test Methods for Absorption and Bulk Specific Gravity of Dimension Stone
Street 41/ Durability Section
Kapur Mohan Tamang
198. Dimension Stone
ASTM C99/C99M Standard Test Method for Modulus of Rupture of Dimension Stone
Street 41/ Durability Section
1. Kapur Mohan Tamang 2. Arif Husain 3. Irshad Ansari
199. Dimension Stone
ASTM C1353/ C1353M
Standard Test Method for Abrasion Resistance of Dimension Stone Subjected to Foot Traffic Using a Rotary Platform, Double- Head Abraser
Street 41/ Durability Section
1. Kapur Mohan Tamang 2. Arif Husain 3. Irshad Ansari
200. Dimension Stone
ASTM C170/C170M Compressive Strength of Dimension Stone
Street 41/ Durability Section
Kapur Mohan Tamang
201. Dimension Stone
ASTM C880/C880M Standard Test Method for Flexural Strength of Dimension Stone
Street 41/ Durability Section
1. Kapur Mohan Tamang 2. Arif Husain 3. Irshad Ansari
202. 13.21 Dimension Stone
ASTM D4060 & QCS 2014 CL 6 & CL 13.3.4
Standard Test Method for Abrasion Resistance of Organic Coatings by the Taber Abraser
Street 41/ Durability Section
Kapur Mohan Tamang
203. Dimension Stone
BS EN 1926: Annex A
Natural stone test methods (Determining the compressive strength of stones)
Street 41/ Durability Section
1. Kapur Mohan Tamang 2. Arif Husain 3. Irshad Ansari
TL-343 Page 44 of 112 Arab Center for Engineering Studies ACES-Doha
PWA No. Category Standard/ Method
No. /Date Standard/Method Title &
Section Location /
Facility Authorized Technicians
204. Dimension Stone
EN 1341 CL 4.5 / BS EN 14157 Method A
Natural stones — Determination of (Abrasion Resistance)
Street 41/ Durability Section
1. Kapur Mohan Tamang
205. Environmental Chemistry - Water - Wastewater and Soil
APHA/AWWA 23rd Ed., 2120C
Spectrophotometric— Single-Wavelength Method (PROPOSED) (Color)
Street 41/ Chemical section
1. Al Cruz Atilano 2. Ariel Audine Manongsong 3. Saleem Daylo Abante
206. 9.3 Environmental Chemistry - Water - Wastewater and Soil
APHA/AWWA 23rd Ed., 2130 B
Nephelometric Method (Turbidity)
Street 41/ Chemical section
1. Al Cruz Atilano 2. Ariel Audine Manongsong 3. Ahmed Mohammed Bashir Saleem 4. Daylo Abante Van Soriano
207. 9.75 Environmental Chemistry - Water - Wastewater and Soil
APHA/AWWA 23rd Ed., 2320 B
Alkalinity by Titration Method Street 41/ Chemical section
1. Al Cruz Atilano 2. Saleem Kalathil Daylo Abante
208. 9.77 Environmental Chemistry - Water - Wastewater and Soil
APHA/AWWA 23rd Ed., 2320 B
Titration Method (Bicarbonate)
Street 41/ Chemical section
1. Al Cruz Atilano, 2. Ariel Audine Manongsong Saleem 3. Daylo Abante
209. 9.78 Environmental Chemistry - Water - Wastewater and Soil
APHA/AWWA 23rd Ed., 2320 B
Titration Method (Carbonate) Street 41/ Chemical section
1. Al Cruz Atilano, 2. Ariel Audine Manongsong Saleem 3. Daylo Abante
210. 9.76 Environmental Chemistry - Water - Wastewater and Soil
APHA/AWWA 23rd Ed., 2320 B
Titration Method (Phenolphthalein Alkalinity)
Street 41/ Chemical section
1. Al Cruz Atilano, 2. Ariel Audine Manongsong Saleem 3. Daylo Abante
211. 9.39 Environmental Chemistry - Water - Wastewater and Soil
APHA/AWWA 23rd Ed., 2340 C
Hardness by EDTA Titrimetric Method
Street 41/ Chemical section
1. Ariel Audine Manongsong, 2. Al Cruz Atilano, 3. Ahmed Saleem 4. Daylo Abante
TL-343 Page 45 of 112 Arab Center for Engineering Studies ACES-Doha
PWA No. Category Standard/ Method
No. /Date Standard/Method Title &
Section Location /
Facility Authorized Technicians
212. 9.2 Environmental Chemistry - Water - Wastewater and Soil
APHA/AWWA 23rd Ed., 2510 B
Conductivity by Laboratory Method
Street 41/ Chemical section
1. Al Cruz Atilano, 2. Ariel Audine Manongsong, 3. Saleem 4. Daylo Abante 5. Ria Luna
213. Environmental Chemistry - Water - Wastewater and Soil
APHA/AWWA 23rd Ed., 2520B
Electrical Conductivity Method (salinity)
Street 41/ Chemical section
1. Al Cruz Atilano 2. Ariel Audine Manongsong 3. Saleem Daylo Abante
214. 9.40 Environmental Chemistry - Water - Wastewater and Soil
APHA/AWWA 23rd Ed., 2540-B
Total Solids Dried at 103– 105°C (Total Solids)
Street 41/ Chemical section
1. Al Cruz Atilano, 2. Ariel Audine Manongsong, 3. Saleem 4. Daylo Abante 5. Ria Luna
215. 9.70 Environmental Chemistry - Water - Wastewater and Soil
APHA/AWWA 23rd Ed., 2540 C
Total Dissolved Solids Dried at 180 oC (TDS)
Street 41/ Chemical section
1. Ariel Audine Manongsong, 2. Al Cruz Atilano, 3.Ahmed Saleem 4. Daylo Abante 5. Ria Luna
216. 9.8 Environmental Chemistry - Water - Wastewater and Soil
APHA/AWWA 23rd Ed., 2540- C&E
Total Volatile Dissolved Solids (TVDS)
Street 41/ Chemical section
1. Ariel Audine Manongsong, 2. Al Cruz Atilano, 3. Ahmed Saleem 4. Daylo Abante
217. 9.50 Environmental Chemistry - Water - Wastewater and Soil
APHA/AWWA 23rd Ed., 2540-D
Total Suspended Solids Dried at 103–105°C (Total Suspended Solids (TSS))
Street 41/ Chemical section
1. Ariel Audine Manongsong, 2. Al Cruz Atilano, 3.Ahmed Saleem 4. Daylo Abante 5. Van Soriano 6. Ria Luna
218. 9.6 Environmental Chemistry - Water - Wastewater and Soil
APHA/AWWA 23rd Ed., 2540-D&E
Total Volatile Suspended Solids (TVSS)
Street 41/ Chemical section
1. Ariel Audine Manongsong, 2. Al Cruz Atilano, 3. Ahmed Saleem 4. Daylo Abante
TL-343 Page 46 of 112 Arab Center for Engineering Studies ACES-Doha
PWA No. Category Standard/ Method
No. /Date Standard/Method Title &
Section Location /
Facility Authorized Technicians
219. 9.90 Environmental Chemistry – Water - Wastewater and Soil
APHA/AWWA 22nd Ed. 2540-F
Settleable Solids Street 41/ Chemical section
1. Al Cruz 2. Saleem K. Kalathil
220. 9.10 Environmental Chemistry - Water - Wastewater and Soil
APHA/AWWA, SM, 22nd Ed., 2540-G
Sludge Weight Street 41/ Chemical Section
1. Al Cruz Atilano 2. Daylo Abante
221. 9.11 Environmental Chemistry - Water - Wastewater and Soil
APHA/AWWA, SM, 22nd Ed., 2710-D
Sludge Volume Street 41/ Chemical Section
1. Al Cruz Atilano 2. Daylo Abante
222. 9.12 Environmental Chemistry - Water - Wastewater and Soil
APHA/AWWA, SM, 22nd Ed., 2710-D
Sludge Volume Index Street 41/ Chemical Section
1. Al Cruz Atilano 2. Daylo Abante
223. 9.58 Environmental Chemistry - Water - Wastewater and Soil
APHA/AWWA, 23rd Ed. 3120-B
Antimony Street 41/ Chemical section
1. Ariel Audine Manongsong, 2. Ria Luna
224. 9.48 Environmental Chemistry - Water - Wastewater and Soil
APHA/AWWA, 23rd Ed., 3120-B
Arsenic Street 41/ Chemical section
1. Ariel Audine Manongsong, 2. Ria Luna
225. 9.60 Environmental Chemistry - Water - Wastewater and Soil
APHA/AWWA, 23rd Ed., 3120-B
Beryllium Street 41/ Chemical section
1. Ariel Audine Manongsong, 2. Ria Luna
226. 9.43 Environmental Chemistry - Water - Wastewater and Soil
APHA/AWWA 23rd Ed., 3120- B
Calcium Street 41/ Chemical section
1. Ariel Audine Manongsong 2. Ria Luna
TL-343 Page 47 of 112 Arab Center for Engineering Studies ACES-Doha
PWA No. Category Standard/ Method
No. /Date Standard/Method Title &
Section Location /
Facility Authorized Technicians
227. 9.72 Environmental Chemistry - Water - Wastewater and Soil
APHA/AWWA 23rd Ed., 3120-B
Chronium(VI) Street 41/ Chemical section
1. Al Cruz 2. Saleem Kalathil
228. 9.42 Environmental Chemistry - Water - Wastewater and Soil
APHA/AWWA 23rd Ed., 3120- B
Magnesium Street 41/ Chemical section
1. Ariel Audine Manongsong 2. Ria Luna
229. 9.70 Environmental Chemistry - Water - Wastewater and Soil
APHA/AWWA 23rd Ed., 3120-B
Mercury Street 41/ Chemical section
1. Ariel Audine Manongsong, 2. Ria Luna
230. 9.63 Environmental Chemistry - Water - Wastewater and Soil
APHA/AWWA 23rd Ed. 3120-B
Molybdenum Street 41/ Chemical section
1. Ariel Audine Manongsong, 2. Ria Luna
231. 9.54 Environmental Chemistry - Water - Wastewater and Soil
APHA/AWWA 23rd Ed., 3120-B
Phosphorous Street 41/ Chemical section
1. Ariel Audine Manongsong, 2. Ria Luna
232. 9.45 Environmental Chemistry - Water - Wastewater and Soil
APHA/AWWA 23rd Ed., 3120- B
Potassium Street 41/ Chemical section
1. Ariel Audine Manongsong 2. Ria Luna
233. 9.64 Environmental Chemistry - Water - Wastewater and Soil
APHA/AWWA 23rd Ed., 3120-B
Selenium Street 41/ Chemical section
1. Ariel Audine Manongsong, 2. Ria Luna
234. 9.56 Environmental Chemistry - Water - Wastewater and Soil
APHA/AWWA 23rd Ed., 3120-B
Silicon Street 41/ Chemical section
1. Ariel Audine Manongsong, 2. Ria Luna
TL-343 Page 48 of 112 Arab Center for Engineering Studies ACES-Doha
PWA No. Category Standard/ Method
No. /Date Standard/Method Title &
Section Location /
Facility Authorized Technicians
235. 9.44 Environmental Chemistry - Water - Wastewater and Soil
APHA/AWWA 23rd Ed., 3120- B
Sodium Street 41/ Chemical section
1. Ariel Audine Manongsong 2. Ria Luna
236. Environmental Chemistry - Water - Wastewater and Soil
APHA/AWWA 23rd Ed., 3120-B
Sulfur Street 41/ Chemical section
1. Ariel Audine Manongsong, 2. Ria Luna
237. 9.66 Environmental Chemistry - Water - Wastewater and Soil
APHA/AWWA 23rd Ed., 3120-B
Titanium Street 41/ Chemical section
1. Ariel Audine 2. Manongsong, 3. Ria Luna
238. 9.67 Environmental Chemistry - Water - Wastewater and Soil
APHA/AWWA 23rd Ed. 3120-B
Vanadium Street 41/ Chemical section
1. Ariel Audine 2. Manongsong, 3. Ria Luna
239. 9.46 9.47 9.49 9.50 9.51 9.52 9.53 9.55 9.57 9.59 9.61 9.62 9.65 9.68 9.69
Environmental Chemistry - Water - Wastewater and Soil
AAPHA/AWWA 23rd Ed., 3120-B Heavy Metal Analysis by ICP, 3110-B Heavy Metal
ICP Heavy Metal Concentrations: Aluminum (Al), Barium (Ba), Bismuth (Bi), Boron (B), Cadmium (Cd), Calcium (Ca), Chromium (Cr), Cobalt (Co), Copper (Cu), Gallium (Ga), Indium (I), Iron (Fe), Lead (Pb), Lithium (Li), Magnesium (Mg), Manganese (Mn), Nickel (Ni), Potassium, Siver (Ag) Thallium (Ti) Zinc (Zn)
Street 41/ Chemical section
1. Ariel Audine Manongsong 2. Ria Luna
240. 9.40 Environmental Chemistry - Water - Wastewater and Soil
APHA/AWWA 23rd Ed., 3500-Ca-B
EDTA Titrimetric Method (Calcium)
Street 41/ Chemical section
1. Ariel Audine Manongsong, 2. Al Cruz Atilano, 3.Ahmed Saleem 4. Daylo Abante
TL-343 Page 49 of 112 Arab Center for Engineering Studies ACES-Doha
PWA No. Category Standard/ Method
No. /Date Standard/Method Title &
Section Location /
Facility Authorized Technicians
241. 9.72 Environmental Chemistry - Water - Wastewater and Soil
APHA/AWWA 22nd Ed. 3500-Cr B,
Chromium(VI) Street 41/ Chemical section
1. Al Cruz 2. Saleem Kalathil
242. 9.41 Environmental Chemistry - Water - Wastewater and Soil
APHA/AWWA 23rd Ed., 3500-Mg-B
Magnesium Concentration by Calculation
Street 41/ Chemical section
1. Ariel Audine Manongsong, 2. Al Cruz Atilano, 3.Ahmed Saleem 4. Daylo Abante
243. 9.26 9.27 9.28 9.29 9.30 9.32 9.73
Environmental Chemistry – Water - Wastewater and Soil
APHA/AWWA 23rd Ed., 4110-B & P
Determination of SulphateSO4 , Bromide Br, Nitrate NO3, Nitrire NO2, Floride F, Cloride, Phosphate
Street 41/ Chemical section
1. Alcroz Hossam Ariel 2. Daylo Abante
244. 9.74 Environmental Chemistry - Water - Wastewater and Soil
APHA/AWWA 23rd Ed., 4110-B & D,
Bromate Street 41/ Chemical section
1. Al Cruz 2. Saleem Kalathil
245. Environmental Chemistry - Water - Wastewater and Soil
APHA/AWWA 23rd Ed., 4110-B & D
Chlorate, Chlorite Street 41/ Chemical section
1. Al Cruz 2. Moumene Abdellah
246. 9.33 Environmental Chemistry - Water - Wastewater and Soil
APHA/AWWA 23rd Ed., 4500-B & C
Phosphorous (Total) Street 41/ Chemical section
1. Al Cruz Atilano 2. Ariel Audine Manongsong 3. Saleem Kalathil Daylo Abante
247. 9.25 Environmental Chemistry - Water - Wastewater and Soil
APHA/AWWA 23rd Ed., 4500-Cl B
(Chloride by Argentometric Method)
Street 41/ Chemical section
1. Ariel Audine Manongsong 2. Al Cruz Atilano
TL-343 Page 50 of 112 Arab Center for Engineering Studies ACES-Doha
PWA No. Category Standard/ Method
No. /Date Standard/Method Title &
Section Location /
Facility Authorized Technicians
248. 9.23 Environmental Chemistry - Water - Wastewater and Soil
APHA/AWWA 23rd Ed., 4500-Cl G
DPD Colorimetric Method (Total Chlorine)
Street 41/ Chemical section
1. Al Cruz Atilano 2. Ariel Audine Manongsong 3. Ahmed Mohammed Bashir Saleem 4. Daylo Abante Van Soriano
249. 9.24 Environmental Chemistry - Water - Wastewater and Soil
APHA/AWWA 23rd Ed., 4500-Cl G
DPD Colorimetric Method (Residual Chlorine)
Street 41/ Chemical section
1. Al Cruz Atilano 2. Ariel Audine Manongsong 3. Ahmed Mohammed Bashir Saleem 4. Daylo Abante Van Soriano
250. 9.10 Environmental Chemistry - Water - Wastewater and Soil
APHA/AWWA 23rd Ed., 4500 H+ B
pH VALUE Street 41/ Chemical section
1. Al Cruz Atilano, 2. Ariel Audine Manongsong, 3. Saleem 4. Daylo Abante 5. Ria Luna
251. 9.19 Environmental Chemistry - Water - Wastewater and Soil
APHA/AWWA 23rd Ed., 4500 NH3 B & C
Ammonia Nitrogen Street 41/ Chemical section
1. Al Cruz Atilano 2. Ariel Audine Manongsong 3. Saleem Kalathil Daylo Abante
252. 9.21 Environmental Chemistry - Water - Wastewater and Soil
APHA/AWWA 23rd Ed., 4500-NO2B
Colorimetric Method (Nitrite Nitrogen)
Street 41/ Chemical section
1. Ariel Audine Manongsong 2. Al Cruz Atilano, 3. Ahmed Saleem Daylo Abante
253. 9.20 Environmental Chemistry - Water - Wastewater and Soil
APHA/AWWA 23rd Ed., 4500-NO3E
Cadmium Reduction Method (Nitrate Nitrogen)
Street 41/ Chemical section
1. Ariel Audine Manongsong 2. Al Cruz Atilano, 3. Ahmed Saleem Daylo Abante
254. 9.17 Environmental Chemistry - Water - Wastewater and Soil
APHA/AWWA 23rd Ed., 4500 Norg C
Semi-Micro-Kjeldahl Method (Total Kjeldahl Nitrogen)
Street 41/ Chemical section
1. Ariel Audine Manongsong 2. Al Cruz Atilano, 3. Ahmed Saleem Daylo Abante
TL-343 Page 51 of 112 Arab Center for Engineering Studies ACES-Doha
PWA No. Category Standard/ Method
No. /Date Standard/Method Title &
Section Location /
Facility Authorized Technicians
255. 9.18 Environmental Chemistry - Water - Wastewater and Soil
APHA/AWWA 23rd Ed., 4500 Norg C
Semi-Micro-Kjeldahl Method (Total Organic Nitrogen)
Street 41/ Chemical section
1. Ariel Audine Manongsong 2. Al Cruz Atilano, 3. Ahmed Saleem Daylo Abante
256. 9.14 Environmental Chemistry - Water - Wastewater and Soil
APHA/AWWA 22nd Ed. 4500-O G
Dissolved Oxygen Street 41/ Chemical Section
1. Al Cruz Atilano 2. Daylo Abante
257. 9.25 Environmental Chemistry - Water - Wastewater and Soil
APHA/AWWA 23rd Ed., 4500 P B, C
Acid Colorimetric Method (Phosphate)
Street 41/ Chemical section
1. Al Cruz Atilano 2. Ariel Audine Manongsong 3. Saleem Kalathil Daylo Abante
258. 9.37 Environmental Chemistry - Water - Wastewater and Soil
APHA/AWWA 23rd Ed., 4500- S2 F
Iodometric Method (Sulphide)
Street 41/ Chemical section
1. Al Cruz Atilano 2. Ahmed Mohammed Bashir Ahmed, 3. Ariel Audine Manongsong Saleem 4. Daylo Abante
259. 9.82 Environmental Chemistry – Water - Wastewater and Soil
APHA/AWWA 23rd Ed., 4500- SiIO2-C, 22P and P
Total Silicates Street 41/ Chemical section
1. Ieza AL cruz 2. Daylo Abante
260. 9.36 Environmental Chemistry - Water - Wastewater and Soil
APHA/AWWA 23rd Ed., 4500- SO4 E
Turbidimetric Method (Sulphate)
Street 41/ Chemical section
1. Al Cruz Atilano 2. Ariel Audine Manongsong 3. Saleem Daylo Abante
261. 9.13 Environmental Chemistry - Water - Wastewater and Soil
APHA/AWWA 23rd Ed., 5210B & 4500-OG
Biochemical Oxygen Demand(BOD)
Street 41/ Chemical section
1. Al Cruz Atilano 2. Saleem Kalathil Daylo Abante
TL-343 Page 52 of 112 Arab Center for Engineering Studies ACES-Doha
PWA No. Category Standard/ Method
No. /Date Standard/Method Title &
Section Location /
Facility Authorized Technicians
262. 9.15 Environmental Chemistry - Water - Wastewater and Soil
APHA/AWWA 23rd Ed., 5220 D
Closed Reflux, Colorimetric Method (Chemical Oxygen Demand(COD))
Street 41/ Chemical section
1. Ariel Audine Manongsong 2. Al Cruz Atilano, 3. Ahmed Saleem Daylo Abante
263. 9.79 Environmental Chemistry – Water - Wastewater and Soil
APHA/AWWA 23rd Ed., 5310-B or C, 22P and P
Total Organic Carbon (TOC) Street 41/ Chemical section
1. Al Cruz Saleem 2. Ahmed Mohamed Bashir Ariel
264. 9.22 Environmental Chemistry - Water - Wastewater and Soil
APHA/AWWA 23rd Ed., 5520 B
Oil & Grease Street 41/ Chemical section
1. Al Cruz Atilano 2. Ariel Audine Manongsong 3. Daylo Abante
265. 9.34 Environmental Chemistry – Water - Wastewater and Soil
APHA/AWWA 23rd Ed., 5530 B&C, P
Phenol Concentrations Street 41/ Chemical section
1. Abante Al Cruz
266. 9.81 Environmental Chemistry - Water - Wastewater and Soil
APHA/AWWA 23rd Ed., 6200 Volatile Organic Compounds
Organic Hydrocarbon Street 41/ Chemical section
1. Ahmed Mohammed Bashir Ahmed 2. Ariel Audine Manongsong
267. Environmental Chemistry - Water - Wastewater and Soil
BS 1377-3 CL 5.4 Determination of the sulphate content of ground water
Street 41/ Chemical section
1. Al Cruz Atilano 2. Saleem Kalathil Daylo Abante
268. Environmental Chemistry - Water - Wastewater and Soil
BS 1377-3 CL 8 Determination of total dissolved solids
Street 41/ Chemical section
1. Al Cruz Atilano 2. Saleem Kalathil Daylo Abante
269. Environmental Chemistry - Water - Wastewater and Soil
BS 1377-3 CL 9 Determination of the pH value
Street 41/ Chemical section
1. Al Cruz Atilano 2. Saleem Kalathil Daylo Abante
TL-343 Page 53 of 112 Arab Center for Engineering Studies ACES-Doha
PWA No. Category Standard/ Method
No. /Date Standard/Method Title &
Section Location /
Facility Authorized Technicians
270. Environmental Chemistry - Water - Wastewater and Soil
BS EN ISO 10523 Water quality (Determination of pH)
Street 41/ Chemical section
1. Al Cruz Atilano 2. Ariel Audine Manongsong 3. Saleem Daylo Abante
271. Environmental Chemistry - Water - Wastewater and Soil
ISO 4316 EI Determination of pH of aqueous solutions - Potentiometric method
Street 41/ Chemical section
1. Al Cruz Atilano, 2. Ariel Audine Manongsong, 3. Saleem 4. Daylo Abante 5. Ria Luna
272. Environmental Chemistry - Water - Wastewater and Soil
US EPA 6010C/3005A
Aluminum (Al), Barium (Ba), Bismuth (Bi), Boron (B), Cadmium (Cd), Calcium (Ca), Chromium (Cr), Cobalt (Co), Copper (Cu), Gallium (Ga), Indium (I), Iron (Fe), Lead (Pb), Lithium (Li), Magnesium (Mg), Manganese (Mn), Nickel (Ni), Potassium (K), Silver (Ag), Sodium (Na),S
Street 41/ Chemical section
1. Ariel Audine Manongsong 2. Ahmed Mohammed Bashir
273. Environmental Chemistry - Water - Wastewater and Soil
US EPA 6010C/3050B
Aluminum (Al), Barium (Ba), Bismuth (Bi), Boron (B), Cadmium (Cd), Calcium (Ca), Chromium (Cr), Cobalt (Co), Copper (Cu), Gallium (Ga), Indium (I), Iron (Fe), Lead (Pb), Lithium (Li), Magnesium (Mg), Manganese (Mn), Nickel (Ni), Potassium (K), Silver (Ag), Sodium (Na),S
Chemistry Lab 1. Ahmed 2. Ariel Audine Manongsong
274. Environmental Chemistry - Water - Wastewater and Soil
US EPA 8015D/1664B/9071B
TPH ((GRO (Gasoline rang organic),DRO (Diesel rang organic),Heavy fraction))
Street 41/ Chemical section
1. Ahmed Mohammed Bashir Ahmed, 2. Ariel Audine Manongsong
TL-343 Page 54 of 112 Arab Center for Engineering Studies ACES-Doha
PWA No. Category Standard/ Method
No. /Date Standard/Method Title &
Section Location /
Facility Authorized Technicians
275. Environmental Chemistry - Water - Wastewater and Soil
US EPA 8260C/5030/5035
VOC (volatile organic compound)
Street 41/ Chemical section
1. Ahmed Mohammed Bashir Ahmed, 2. Ariel Audine Manongsong
276. Environmental Chemistry - Water - Wastewater and Soil
US EPA 8270D SVOC (Simi volatile organic compound)
Street 41/ Chemical section
1. Ahmed Mohammed Bashir Ahmed, 2. Ariel Audine Manongsong
277. Environmental Monitoring
ISO 1996-2 Noise In-Situ 1. Ahmed Mohamed Bashir 2. Ariel Audine Manongsong
278. Environmental Monitoring
SOP-For AIR Quality Ambient Air quality Monitoring
In-Situ 1. Ahmed Mohamed Bashir 2. Ariel Audine Manongsong
279. Environmental Monitoring
Stack Emission USEPA Method 1,2,3,4 & 5
Method 1— Sample and Velocity Traverses for Stationary Sources Method 2—Determination of Stack Gas Velocity and Volumetric Flow Rate (Type S Pitot Tube) Method 3 - Gas Analysis for the Determination of Dry Molecular Weight METHOD 4— DETERMINATION OF MOISTURE CONTENT IN STACK GASES Method 5 - Particulate Matter (PM)
Site test 1. Ariel Manomgong 2. Robert 3. Van
280. Environmental Monitoring
Stack Emission USEPA Method 25A
Determination of Total Gaseous Organic Concentration Using a Flame Ionization Analyzer
Site test 1. Ariel Manomgong 2. Robert 3. Van
281. Environmental Monitoring
Testo 350 SOP Stack emission In-Situ 1. Ahmed Mohamed Bashir 2. Ariel Audine Manongsong
282. Food BS EN 1186-1:2002 Guide to the selection and conditions and test methods of Overall migration
Street 41 / Chemical section
1. Daylo Abante 2.Anuja
TL-343 Page 55 of 112 Arab Center for Engineering Studies ACES-Doha
PWA No. Category Standard/ Method
No. /Date Standard/Method Title &
Section Location /
Facility Authorized Technicians
283. Food BS EN 11863 Determination of the overall Migration into aqueous food simulants by total Immersion
Street 41 / Chemical section
1. Daylo Abante 2.Anuja
284. Food BS EN 11869:2002 Determination of the overall Migration into aqueous food simulants – By Article Filling
Street 41 / Chemical section
1. Daylo Abante 2.Anuja
285. Food CCFRA 3.1.2 and CCFRA3.1.5:2007
Detection of Salmonella Street 41 / Chemical section
1. Daylo Abante 2.Anuja
286. Food Ioden value Iodine absorption number of oil and fats (Wijs Method)
Street 41 / Chemical section
1. Al Cruz 2. Moumene Abdellah
287. 8.7 Geotechnical Tests
ASTM D2435/D2435M
Determination of One Dimensional Consolidation Properties of Soils
Street 41/ Soil Lab
1. Mohammed Gamal Abdulradi Alsayed 2. Bles Nforneh Molah 3. Ahmed Mahmoud Rashid Ahmed
288. 8.4 Geotechnical Tests
ASTM D4543 Preparing Rock Core Specimens to Dimensional and Shape Tolerances
Street 41/ Soil Lab
1. Mohammed Gamal Abdulradi Alsayed 2. Mohammed Abdulhamid Abdulalim Ali 3. Rom Bahadur Ale Ahmed Mahmoud Rashid Ahmed 4. Yassine Hosni
289. 8.11 Geotechnical Tests
ASTM D4546 One Dimensional Swell of Cohesive Soils
Street 41/ Soil Lab
1. Mohammed Gamal Abdulradi Alsayed 2. Ahmed Mahmoud Rashid Ahmed 3. Ram Bahadur Ale
290. 8.10 Geotechnical Tests
ASTM D5607 Direct Shear on Rock Street 41/ Soil Lab
1- Mohamed Jamal Abd El rady 2- Ahmed Mahmoud Rashed 3-Arif husain 4-Sunday 5- Bless Mola
TL-343 Page 56 of 112 Arab Center for Engineering Studies ACES-Doha
PWA No. Category Standard/ Method
No. /Date Standard/Method Title &
Section Location /
Facility Authorized Technicians
291. 8.3 Geotechnical Tests
ASTM D5731 Standard Test Method for Determination of the Point Load Strength Index of Rock and Application to Rock Strength Classifications
Street 41/ Soil Lab
1. Mohammed Gamal Abdulradi Alsayed 2. Muhamad Aslam 3. Irshad Ansari 4. Arif Hussain 5. Philip 6. Bles Nforneh Molah 7. Ahmed Mahmoud Rashid Ahmed
292. 8.23 Geotechnical Tests
ASTM D6951/D6951M
Standard Test Method for Use of the Dynamic Cone Penetrometer in Shallow Pavement Applications
In-Situ 1. Mohammed Gamal Abdulradi Alsayed 2. Mohammed Abdulhamid Abdulalim Ali 3. Kapur Mohan Tamang
293. 8.5 Geotechnical Tests
ASTM D7012 Standard Test Method for Unconfined Compressive Strength of Intact Rock Core Specimens
Street 41/ Soil Lab
1. Mohammed Gamal Abdulradi Alsayed 2. Yassine Hosni 3. Mohammed Abdulhamid Abdulalim Ali 4. Bles Nforneh Molah 5. Sunday Ifeanyichukwu Izukwe 6. Ifeanyichukwu Izukwe 7. Ahmed Mahmoud Rashid Ahmed
294. 8.20 Geotechnical Tests
ASTM G57 Standard Test Method for Field Measurement of Soil Resistivity Using the Wenner Four-Electrode Method (Electrical Resistivity Test)
In-Situ 1. Mohammed Gamal Abdulradi Alsayed 2. Mohammed Abdulhamid Abdulalim Ali 3. Kapur Mohan Tamang
295. Geotechnical Tests
BRE Digest 365 Soakaway design (Dissiption) Work Shop 1. Joemar Paala 2. Faisal Vakialla Hair Al Noor
TL-343 Page 57 of 112 Arab Center for Engineering Studies ACES-Doha
PWA No. Category Standard/ Method
No. /Date Standard/Method Title &
Section Location /
Facility Authorized Technicians
296. 8.6 Geotechnical Tests
BS 1377-5 CL 3 Methods of test for Soils for civil engineering purposes — Compressibility, permeability and durability tests (Determination of One Dimensional Consolidation Properties of Soils)
Street 41/ Soil Lab
1. Mohammed Gamal Abdulradi Alsayed 2. Yassine Hosni 3. Mohammed Abdulhamid Abdulalim Ali 4. Bles Nforneh Molah 5. Sunday Ifeanyichukwu Izukwe 6. Ifeanyichukwu Izukwe 7. Ahmed Mahmoud Rashid Ahmed
297. 8.12 Geotechnical Tests
BS 1377-5 CL 5 Constant Head Permeability Test
Street 41/ Soil Lab
1. Ahmed Rasheed Mohammed Jamal 2. Mohmmed Abdelhameed Yasin Hosny
298. 8.13 Geotechnical Tests
BS 1377-7-CL 3 Vane Shear Test Street 41/ Soil Lab
1- Mohamed Jamal Abd El rady 2- Ahmed Mahmoud Rashed 3-Arif husain 4-Sunday 5- Bless Mola
299. 8.8 Geotechnical Tests
BS 1377-7 CL 4 Methods of test for Soils for civil engineering purposes — Shear strength tests (total stress) (Determination of shear strength by direct shear (small shearbox apparatus))
Street 41/ Soil Lab
1. Mohammed Gamal Abdulradi Alsayed 2. Yassine Hosni 3. Mohammed Abdulhamid Abdulalim Ali 4. Bles Nforneh Molah 5. Sunday Ifeanyichukwu Izukwe 6. Ifeanyichukwu Izukwe 7. Ahmed Mahmoud Rashid Ahmed
300. 8.9 Geotechnical Tests
BS 1377-7 CL 5 Methods of test for soils for civil engineering purposes. Shear strength tests (total stress) (Direct Shear on Soil (Large Box))
Street 41/ Soil Section
1. Mohammed gamal abdulradi alsayed 2. Mohammed abdulhamid abdulalim ali 3. Rom bahadur ale Ahmed mahmoud rashid ahmed 4. Yassine hosni
TL-343 Page 58 of 112 Arab Center for Engineering Studies ACES-Doha
PWA No. Category Standard/ Method
No. /Date Standard/Method Title &
Section Location /
Facility Authorized Technicians
301. 8.19 Geotechnical Tests
BS 1377-9 CL 3.3 (EN ISO 22476- 3+A1 (E))
Geotechnical investigation and testing — Field testing — Standard penetration test (Determination of the penetration resistance using the split-barrel sampler (the standard penetration test SPT))
In-Situ
302. 8.21 Geotechnical Tests
BS 1377-9 CL 4.1 Determination of the vertical deformation and strength characteristics of soil by the plate loading test
In-Situ 1. Sunday 2. Bles Molah 3. Mohammed Jamal 4. Ahmed Rasheed 5. Mohamad Aslam Nagoor 6. Abayomi Philip 7. Irshad Ansari 8. Arif Hussain 9. Victor Chidiadi 10. Massoud Kamel 11. Maskkor Mohamed anifa
303. 8.22 Geotechnical Tests
BS 1377-9 CL 4.3 Methods of test for Soils for civil engineering purposes — In-situ tests (Determination of the in- situ California Bearing Ratio (CBR))
Street 41/ Soil Lab
1. Mohammed Gamal Abdulradi Alsayed 2. Yassine Hosni 3. Mohammed Abdulhamid Abdulalim Ali 4. Bles Nforneh Molah 5. Sunday Ifeanyichukwu Izukwe 6. Ifeanyichukwu Izukwe 7. Ahmed Mahmoud Rashid Ahmed
304. 8.14 Geotechnical Tests
BS 5930 CL 22 Code of practice for site investigations (Soil Sampling)
In-Situ
305. 8.15 Geotechnical Tests
BS 5930 CL 23 Code of practice for site investigations (Ground Water Sampling)
Work Shop 1. Faisal Vakialla Hair Al Noor
306. 8.16 Geotechnical Tests
BS 5930 CL 23, 27, 47
Code of practice for site investigations (Ground Water Level Measurement)
Work Shop 1. Faisal Vakialla Hair Al Noor
TL-343 Page 59 of 112 Arab Center for Engineering Studies ACES-Doha
PWA No. Category Standard/ Method
No. /Date Standard/Method Title &
Section Location /
Facility Authorized Technicians
307. 8.17 Geotechnical Tests
BS 5930 CL 25 Code of practice for site investigations (Falling Head Permeability Test)
Work Shop
308. 8.18 Geotechnical Tests
BS 5930 CL 25 Code of practice for site investigations (Packer Test)
Work Shop 1. Joemar Paala
309. 8.1 Geotechnical Tests
BS 5930 CL tion 6 Description of Soil & Rock Street 41/ Soil Lab
1. Joemar Paala 2. Faisal Vakialla Hair Al Noor
310. Geotechnical Tests
CIRIA-Mair and Wood
Pressuremetere testing methods and interpretation (Pressuremeter HPD)
Work Shop 1. Joemar Paala 2. Faisal Vakialla Hair Al Noor
311. 11.4 Geotextile ASTM D4533/D4533M
Trapezoid Tearing Strength of Geotextiles
Geotextile & Membrane, Lab 29, Street 41
1. Mohamed Bahnaasy 2. David Onishile 3. Jim Bajarias
312. 11.12 Geotextile ASTM D5199-12 & BS EN 946
Thickness Under Pressure 2 Kpa
Geotextile & Membrane, Lab 29, Street 41
1. Mohamed Bahnaasy 2. David Onishile 3. Jim Bajarias
313. 11.6 Geotextile BS EN ISO 10319 Geosynthetics — Wide width tensile test
Geotextile & Membrane, Lab 29, Street 41
1. Mohamed Bahnaasy 2. David Onishile 3. Jim Bajarias
314. 11.9 Geotextile BS EN ISO 11058 Determination of water permeability characteristics normal to the plane, without load
Geotextile & Membrane, Lab 29, Street 41
1. Mohamed Bahnaasy 2. David Onishile 3. Jim Bajarias
315. 11.5 Geotextile BSEN ISO 12236 CBR Puncture Resistance Geotextile & Membrane, Lab 29, Street 41
1. Mohamed Bahnaasy 2. David Onishile 3. Jim Bajarias
316. 11.8 Geotextile BS EN ISO 13433 Dynamic perforation test (cone drop test)
Geotextile & Membrane, Lab 29, Street 41
1. Mohamed Bahnaasy 2. David Onishile 3. Jim Bajarias
317. 11.16 Geotextile & Waterproofing
ASTM D412 Standard Test Methods for Vulcanized Rubber and Thermoplastic Elastomers— Tension (Test Method A)
Street 41/ Membrane / Geotextile Section
1. Mohamed Bahnaasy 2. David Onishile 3. Jim Bajarias
TL-343 Page 60 of 112 Arab Center for Engineering Studies ACES-Doha
PWA No. Category Standard/ Method
No. /Date Standard/Method Title &
Section Location /
Facility Authorized Technicians
318. 11.99 Geotextile & Waterproofing
ASTM D714 Standard Test Method for Evaluating Degree of Blistering of Paints (After Sulphuric Acid Immersion Test for Internal Lining - per ASTM D543)
Street 41/ Membrane / Geotextile and Chemistry Section
1. Mohamed Bahnaasy 2. David Onishile 3. Jim Bajarias
319. 11.2 Geotextile & Waterproofing
ASTM D751 Standard Test Methods for Coated Fabrics - Bursting Strength - Cl. 18
Street 41/ Membrane / Geotextile Section
1. Mohamed Bahnaasy 2. David Onishile 3. Jim Bajarias
320. 11.18 Geotextile & Waterproofing
ASTM D1000 Standard Test Methods for Pressure-Sensitive Adhesive-Coated Tapes Used for Electrical and Electronic Applications - Adhesion Strength to Steel and Backing (Cl. 46 - 53)
Street 41/ Membrane / Geotextile Section
1. Mohamed Bahnaasy 2. David Onishile 3. Jim Bajarias
321. 11.3 Geotextile & Waterproofing
ASTM D3787 Standard Test Method for Bursting Strength of Textiles—Constant-Rate-of- Traverse (CRT) Ball Burst Test
Street 41/ Membrane / Geotextile Section
1. Mohamed Bahnaasy 2. David Onishile 3. Jim Bajarias
322. 11.1 Geotextile & Waterproofing
ASTM D5034, G-E and MG-E
Standard Test Method for Breaking Strength and Elongation of Textile Fabrics (Grab and Modified Grab Test)
Street 41/ Membrane / Geotextile Section
1. Mohamed Bahnaasy 2. David Onishile 3. Jim Bajarias
323. 11.7 Geotextile & Waterproofing
ASTM D5035 Standard Test Method for Breaking Force and Elongation of Textile Fabrics (Strip Method)
Street 41/ Membrane / Geotextile Section
1. Mohamed Bahnaasy 2. David Onishile 3. Jim Bajarias
324. 11.13 Geotextile & Waterproofing
BS EN ISO 5084 Determination Of Thickness Of Textiles
Geotextile & Membrane, Lab 29, Street 41
1 - Mohamed Bahnaasy 2 - David Onishile
325. 11.11 Geotextile & Waterproofing
BS EN 12127 Textiles. Fabrics. Determination of mass per unit area using small samples. (Determination Of Mass Per Unit Area (Weight))
Street 41 1. Mohamed Bahnaasy 2. David Onishile 3. Jim Bajarias
TL-343 Page 61 of 112 Arab Center for Engineering Studies ACES-Doha
PWA No. Category Standard/ Method
No. /Date Standard/Method Title &
Section Location /
Facility Authorized Technicians
326. 11.10 Geotextile & Waterproofing
BS EN ISO 12956 Geotextiles and geotextile- related products. Determination of the characteristic opening size. (Pore Size)
Street 41/ Membrane / Geotextile Section
1. Mohamed Bahnaasy 2. David Onishile 3. Jim Bajarias
327. HDPE Pipe BS EN ISO 527-1 CL 10.1
Plastics — Determination of tensile properties Part 1: General principles 10.1 Stress
Street 41/Main Lab
1. Mohamed Abdelhameed 2. Jerry Beter 3. Glenn Oliver 4. Romel
328. HDPE Pipe EN ISO 580 Referred from BS EN 12666-1
Plastics piping systems — Unplasticized poly(vinyl chloride) (PVC-U) pipes — Test methods for the resistance to dichloromethane at a specified temperature (DCMT)
Street 41/Main Lab
1. Mohamed Abdelhameed 2. Jerry Beter 3. Glenn Oliver 4. Romel
329. HDPE Pipe EN ISO 3126 CL 5.2, 5.3.2, 5.3.3, 5.3.4, 5.4
Plastics piping systems — Plastics components — Determination of dimensions, 5.2 Wall Thickness, 5.3.2 Measurement of maximum and minimum diameter, 5.3.3 Mean Outside Diameter, 5.3.4 Mean Inside Diameter, 5.4 Out-of-Roundness
Street 41/Main Lab
1. Mohamed Abdelhameed 2. Jerry Beter 3. Glenn Oliver 4. Romel
330. HDPE Pipe BS 6920-2.2.1+A2 Suitability of non-metallic products for use in contact with water intended for human consumption with regard to their effect on the quality of the water — Part 2: Methods of test — Section 2.2: Odour and flavour of water — Subsection 2.2.1: General method of test
Street 41/Main Lab
1. Daylo Abante 2. Anuja
TL-343 Page 62 of 112 Arab Center for Engineering Studies ACES-Doha
PWA No. Category Standard/ Method
No. /Date Standard/Method Title &
Section Location /
Facility Authorized Technicians
331. HDPE Pipe BS 6920-2.3+A2 Suitability of non-metallic products for use in contact with water intended for human consumption with regard to their effect on the quality of the water Ð Part 2: Methods of testÐ Section 2.4: Growth of aquatic microorganisms test
Street 41/Main Lab
1. Daylo Abante 2. Anuja
332. HDPE Pipe BS 6920-2.6+A2 Suitability of non-metallic products for use in contact with water intended for human consumption with regard to their effect on the quality of the water — Part 2: Methods of test — Section 2.6: The extraction of metals
Street 41/Main Lab
1. Daylo Abante 2. Anuja
333. HDPE Pipe EN 12099 Plastics piping systems - Polyethylene piping materials and components - Determination of volatile content
Street 41/Main Lab
1. Mohamed Abdelhameed 2. Jerry Beter 3. Glenn Oliver 4. Romel
334. HDPE Pipe BS EN 12201- 2:2011+A1:2013, CL 5.1, 5.2, 6.1, 6.2, 6.3
Plastics piping systems for water supply, and for drainage and sewerage under pressure — Polyethylene (PE) Part 2: Pipes, 5.1 Appearance, 5.2 Colour, 6.1 Measurements, 6.2 Mean outside diameter, out-of-roundness (ovality) and tolerances, 6.3 Wall thicknesses and their tolerances
Street 41/Main Lab
1. Mohamed Abdelhameed 2. Jerry Beter 3. Glenn Oliver 4. Romel
335. HDPE Pipe EN 12201-2 CL 11 Plastics piping systems for water supply, and for drainage and sewerage under pressure — Polyethylene (PE) Part 2: Pipes, 11. Marking
Street 41/Main Lab
1. Mohamed Abdelhameed 2. Jerry Beter 3. Glenn Oliver 4. Romel
TL-343 Page 63 of 112 Arab Center for Engineering Studies ACES-Doha
PWA No. Category Standard/ Method
No. /Date Standard/Method Title &
Section Location /
Facility Authorized Technicians
336. HDPE Pipe EN 12666-1 CL 5.2, 6.1, 6.2.1, 6.2.3
Plastics piping systems for non-pressure underground drainage and sewerage - Polyethylene (PE) — Part 1: Specifications for pipes, fittings and the system, 5.2 Colour, 6 Geometrical characteristics 6.1General, 6.2.1 Outside diameter, 6.2.3 Wall thickness
Street 41/Main Lab
1. Mohamed Abdelhameed 2. Jerry Beter 3. Glenn Oliver 4. Romel
337. HDPE Pipe EN ISO 13479 Polyolefin pipes for the conveyance of fluids — Determination of resistance to crack propagation — Test method for slow crack growth on notched pipe
Street 41/Main Lab
1. Mohamed Abdelhameed 2. Jerry Beter 3. Glenn Oliver 4. Romel
338. HDPE Pipe EN ISO 15512 CL 3 Plastics — Determination of water content 3. Method A — Extraction with anhydrous methanol
Street 41/Main Lab
1. Saleem Kalathil
339. HDPE Pipe ISO 1133 CL 8 Plastics — Determination of the melt mass-flow rate (MFR) and melt volume- flow rate (MVR) of thermoplastics Part 1: Standard method 8. Procedure A: Mass- measurement method
Street 41/Main Lab
1. Mohamed Bahnassy 2. David 3. Mohamed Abdelhameed 4. Jerry Beter 5. Glenn Oliver 6. Romel
340. HDPE Pipe ISO 1167-1 Thermoplastics pipes, fittings and assemblies for the conveyance of fluids — Determination of the resistance to internal pressure — Part 1: General method
Street 41/Main Lab
1. Mohamed Abdelhameed 2. Jerry Beter 3. Glenn Oliver 4. Romel
TL-343 Page 64 of 112 Arab Center for Engineering Studies ACES-Doha
PWA No. Category Standard/ Method
No. /Date Standard/Method Title &
Section Location /
Facility Authorized Technicians
341. HDPE Pipe ISO 1167-2 Thermoplastics pipes, fittings and assemblies for the conveyance of fluids — Determination of the resistance to internal pressure — Part 2: Preparation of pipe test pieces
Street 41/Main Lab
1. Mohamed Abdelhameed 2. Jerry Beter 3. Glenn Oliver 4. Romel
342. HDPE Pipe ISO 1183-1 CL 5.1 Plastics — Methods for determining the density of non-cellular plastics Part 1: Immersion method, liquid pyknometer 5.1 Method A — Immersion method
Street 41/Main Lab
1. Mohamed Bahnassy 2. David 3. Mohamed Abdelhameed 4. Jerry Beter 5. Glenn Oliver 6. Romel
343. HDPE Pipe ISO 2505 Thermoplastics pipes — Longitudinal reversion — Test method and parameters
Street 41/Main Lab
1. Mohamed Abdelhameed 2. Jerry Beter 3. Glenn Oliver 4. Romel
344. HDPE Pipe ISO 4065 Thermoplastics pipes — Universal wall thickness table
Street 41/Main Lab
1. Mohamed Abdelhameed 2. Jerry Beter 3. Glenn Oliver 4. Romel
345. HDPE Pipe ISO 4427-2 CL 5.1, 5.2, 6.1, 6.2, 6.3
Plastics piping systems — Polyethylene (PE) pipes and fittings for water supply — Part 2: Pipes, 5.1 Appearance, 5.2 Colour, 6.1 Measurements, 6.2 Mean outside diameter and out-of-roundness (ovality) 6.3 Wall thickness and their tolerances
Street 41/Main Lab
1. Mohamed Abdelhameed 2. Jerry Beter 3. Glenn Oliver 4. Romel
346. HDPE Pipe ISO 4427-2 CL 7 Plastics piping systems — Polyethylene (PE) pipes and fittings for water supply — Part 2: Pipes, 7. Mechanical characteristics (Hydrostatic strength), (Maximum diameter 560 mm)
Street 41/Main Lab
1. Mohamed Abdelhameed 2. Jerry Beter 3. Glenn Oliver 4. Romel
TL-343 Page 65 of 112 Arab Center for Engineering Studies ACES-Doha
PWA No. Category Standard/ Method
No. /Date Standard/Method Title &
Section Location /
Facility Authorized Technicians
347. HDPE Pipe ISO 4427-2 CL11 Plastics piping systems — Polyethylene (PE) pipes and fittings for water supply — Part 2: Pipes 11. Marking
Street 41/Main Lab
1. Mohamed Abdelhameed 2. Jerry Beter 3. Glenn Oliver 4. Romel
348. HDPE Pipe ISO 4433-1 Thermoplastics pipes — Resistance to liquid chemicals — Classification — Part 1: Immersion test method Chemical Characteristics of Pipes in contact with Chemicals
Street 41/Main Lab
349. HDPE Pipe ISO 4433-2 Thermoplastics pipes — Resistance to liquid chemicals — Classification — Part 2: Polyolefin pipes Chemical Characteristics of Pipes in contact with Chemicals
Street 41/Main Lab
350. HDPE Pipe ISO 6259-1 CL 10.2 Thermoplastics pipes — Determination of tensile properties, Part 1: General test method. 10.2 Elongation at break
Street 41/Main Lab
1. Mohamed Abdelhameed 2. Jerry Beter 3. Glenn Oliver 4. Romel
351. HDPE Pipe ISO 6259-3 Thermoplastics pipes — Determination of tensile properties Part 3: Polyolefin pipes
Street 41/Main Lab
1. Mohamed Abdelhameed 2. Jerry Beter 3. Glenn Oliver 4. Romel
352. HDPE Pipe ISO 6964 CL 4 Polyolefin pipes and fittings — Determination of carbon black content by calcination and pyrolysis — Test 4 Method A: Electrical tube furnace
Street 41/Main Lab
1. Mohamed Abdelhameed 2. Jerry Beter 3. Glenn Oliver 4. Romel
TL-343 Page 66 of 112 Arab Center for Engineering Studies ACES-Doha
PWA No. Category Standard/ Method
No. /Date Standard/Method Title &
Section Location /
Facility Authorized Technicians
353. HDPE Pipe ISO 9969 Thermoplastics pipes — Determination of ring stiffness
Street 41/Main Lab
1. Mohamed Bahnassy 2. David 3. Mohamed Abdelhameed 4. Jerry Beter 5. Glenn Oliver 6. Romel
354. HDPE Pipe ISO 11357-6 Plastics — Differential scanning calorimetry (DSC) Part 6: Determination of oxidation induction time (isothermal OIT) and oxidation induction temperature (dynamic OIT)
Street 41/Main Lab
1. Mohamed Abdelhameed 2. Jerry Beter 3. Glenn Oliver 4. Romel
355. HDPE Pipe ISO 11922-1 CL 6 Thermoplastics pipes for the conveyance of fluids — Dimensions and tolerances — Part 1: Metric series 6. Measurement of dimensions
Street 41/Main Lab
1. Mohamed Abdelhameed 2. Jerry Beter 3. Glenn Oliver 4. Romel
356. HDPE Pipe ISO 13953 Polyethylene (PE) pipes and fittings — Determination of the tensile strength and failure mode of test pieces from a butt-fused joint.
Street 41/Main Lab
1. Mohamed Abdelhameed 2. Jerry Beter 3. Glenn Oliver 4. Romel
357. HDPE Pipe ISO 18553 CL 4.1.2, 4.2
Method for the assessment of the degree of pigment or carbon black dispersion in polyolefin pipes, fittings and compounds, 4.1.2 Microtome procedure, 4.2 Microscopic examination
Street 41/Main Lab
1. Mohamed Abdelhameed 2. Jerry Beter 3. Glenn Oliver 4. Romel
358. HDPE Pipe QCS 2014 QCS Section 08: Drainage Works, Part 03 Pipes & Fitting Materials, 3.10.2 Manufacturer 12. Markings
Street 41/Main Lab
1. Mohamed Abdelhameed 2. Jerry Beter 3. Glenn Oliver 4. Romel
359. 12.12 Leakage Testing of Buildings
AAMA 501.2 Quality Assurance and Diagnostic Water leakage field check for Storefronts, Curtain Walls and Sloped Glazing Systems
Street 41/ NDT LAB
1. Abdul Hameed 2. Jerry Beter 3. John Oliver 4. Mohamed Jamal
TL-343 Page 67 of 112 Arab Center for Engineering Studies ACES-Doha
PWA No. Category Standard/ Method
No. /Date Standard/Method Title &
Section Location /
Facility Authorized Technicians
360. 4.15 Masonry Blocks & Paving Units
ASTM C140/C140M CL 8
Standard Test Methods for Sampling and Testing Concrete Masonry Units and Related Units (Water Absorption for Interlocks)
Street 41/Durability Section
1. Kapur Mohan Tamang
361. 4.3 Masonry Blocks & Paving Units
BS 6073-1 Compressive Strength of Concrete Masonry Blocks
Street 41/Concrete Section
1. Govinda Giri 2. Salman Ansari, 3. Mohhamad Arafath Mohiddeen Pichai 4. Mohhamad Arafath Mohamd Mustafa
362. 4.13 Masonry Blocks & Paving Units
BS 6717 Annex B Precast, unreinforced concrete paving blocks — Requirements and test methods (Measurement of Dimensions of Paving Blocks)
Street 41/Concrete Section
1. Mirendra Dhital, 2. Abdul Qader Mohamed Irfan, 3. Govinda giri 4. Salaman Ansari
363. 4.14 Masonry Blocks & Paving Units
BS 6717 Annex B Compressive Strength of Paving Blocks
Street 41/Durability Section
1. Govinda Giri 2. Salman Ansari, 3. Mohhamad Arafath Mohiddeen Pichai 4. Mohhamad Arafath Mohamd Mustafa
364. 4.6 Masonry Blocks & Paving Units
BS 6717 Annex E Tensile Strength of Paving Blocks
Street 41/ Cocrete Section
1. Salman 2. Arafat 3. Govinda
365. Masonry Blocks & Paving Units
BS EN 771 +A1 (BS EN 772-11)
Determination of water absorption of aggregate concrete, autoclaved aerated concrete, manufactured stone and natural stone masonry units due to capillary action and the initial rate of water absorption of clay masonry units
Street 41/Durability Section
1. Kapur Mohan Tamang
366. 4.4 Masonry Blocks & Paving Units
BS EN 771 12011+A1 (BS EN 772 12011+A1)
Determination of compressive strength
Street 41/Concrete Section
1. Abdul Qader Mohamed Irfan, 2. Salman Ansari 3. Govinda Giri
TL-343 Page 68 of 112 Arab Center for Engineering Studies ACES-Doha
PWA No. Category Standard/ Method
No. /Date Standard/Method Title &
Section Location /
Facility Authorized Technicians
367. 4.1 Masonry Blocks & Paving Units
BS EN 771-1, BS EN 772-1
Determination of compressive strength
Street 41/Concrete Section
1. Govinda Giri 2. Salman Ansari, 3. Mohhamad Arafath Mohiddeen Pichai 4. Mohhamad Arafath Mohamd Mustafa
368. 4.2 Masonry Blocks & Paving Units
BS EN 771-1, BS EN 772-7
Methods of test for masonry units - (Determination of water absorption of clay masonry damp proof course units by boiling in water)
Street 41/Durability Section
1. Kapur Mohan Tamang
369. Masonry Blocks & Paving Units
BS EN 771-1, BS EN 772-16
Specification for masonry units - Clay masonry units (Determination of Dimensions)
Street 41/Concrete Section
1. Mirendra Dhital, 2. Abdul Qader Mohamed Irfan, 3. Govinda giri 4. Salaman Ansari
370. 4.5 Masonry Blocks & Paving Units
EN 771-3 Water Absorption for Masonry Blocks
Street 41/ Cocrete Section
1.Safar 2.Raj kumar 3.Glenn
371. Masonry Blocks & Paving Units
BS EN 772-2 clause 8.2.3
Methods of test for masonry units. Determination of percentage area of voids in masonry units (by paper indentation)
Street 41/Concrete Section
1. Mirendra Dhital, 2. Abdul Qader Mohamed Irfan, 3. Govinda giri 4. Salaman Ansari
372. Masonry Blocks & Paving Units
BS EN 1338 Annex C Concrete paving blocks — Requirements and test methods (Measurement of the dimensions of a single block)
Street 41/Concrete Section
1. Mirendra Dhital, 2. Abdul Qader Mohamed Irfan, 3. Govinda giri 4. Salaman Ansari
373. 4.9 Masonry Blocks & Paving Units
BS EN 1338 Annex E Water Absorption for Paving Blocks
Street 41/Durability Section
1. Kapur Mohan Tamang
374. 4.10 Masonry Blocks & Paving Units
BS EN 1338 Annex F Tensile Strength of Paving Blocks
Street 41/Concrete Section
1. Govinda Giri 2. Salman Ansari, 3. Mohhamad Arafath Mohiddeen Pichai 4. Mohhamad Arafath Mohamd Mustafa
TL-343 Page 69 of 112 Arab Center for Engineering Studies ACES-Doha
PWA No. Category Standard/ Method
No. /Date Standard/Method Title &
Section Location /
Facility Authorized Technicians
375. Masonry Blocks & Paving Units
BS EN 1339 Annex C Concrete paving flags — Requirements and test methods (Measurement of the dimensions of a single flag)
Street 41/Concrete Section
1. Mirendra Dhital, 2. Abdul Qader Mohamed Irfan, 3. Govinda giri 4. Salaman Ansari
376. 4.12 Masonry Blocks & Paving Units
BS EN 1339 Annex E Determination of total water absorption
Street 41/Durability Section
1. Kapur Mohan Tamang
377. 4.11 Masonry Blocks & Paving Units
BS EN 1339 Annex F Measurement of bending strength and breaking load
Street 41/Concrete Section
1. Kapur Mohan Tamang
378. 4.6 Masonry Blocks & Paving Units
EN 1340 Annex C Measurement of dimensions of a single unit
Street 41/Durability Section
1. Kapur Mohan Tamang
379. 4.7 Masonry Blocks & Paving Units
EN 1340 Annex E Determination of total water absorption
Street 41/Durability Section
1. Kapur Mohan Tamang
380. 4.8 Masonry Blocks & Paving Units
BS EN 1340 Annex F Concrete kerb units — Requirements and test methods (Measurement of bending strength)
Street 41/Concrete Section
1. Govinda Giri 2. Salman Ansari, 3. Mohhamad Arafath Mohiddeen Pichai 4. Mohhamad Arafath Mohamd Mustafa
381. 4.16 Masonry Blocks & Paving Units
BS EN 13748-1 CL 5.5
Terrazzo tiles — Terrazzo tiles for internal use (Breaking strength and breaking load)
Street 41/Concrete Section
1. Mirendra dhital
382. 4.16 Masonry Blocks & Paving Units
BS EN 13748-1 CL 5.8
Terrazzo tiles — Terrazzo tiles for internal use (Water absorption)
Street 41/Durability Section
1. Kapur Mohan Tamang
383. 9.91 Microbiology — Water and Wastewater
APHA/AWWA 22nd Ed., 923-E
Pseudomonas Aeruginosa Street 41/ Chemical section
1. Daylo Abante 2. Anuja 3. Al Cruz Atilano
384. 9.84 Microbiology — Water and Wastewater
APHA/AWWA 23rd Ed., 9222B & 9222D
Total Coliforms Street 41/ Chemical section
1. Ieza 2. Daylo Ariniente Abante
385. 9.79 9.85
Microbiology— Water and Wastewater
APHA/AWWA 23rd Ed., 9222D
Fecal Coliform Street 41/ Chemical section
1. Ieza 2. Daylo Ariniente Abante
TL-343 Page 70 of 112 Arab Center for Engineering Studies ACES-Doha
PWA No. Category Standard/ Method
No. /Date Standard/Method Title &
Section Location /
Facility Authorized Technicians
386. 9.86 Microbiology — Water and Wastewater
APHA/AWWA 23rd Ed., 9223 B
Enzyme Substrate Test (E- Coli)
Street 41/ Chemical section
1. Daylo Abante 2. Al Cruz Atilano, 3. Anuja
387. 9.88 Microbiology — Water and Wastewater
APHA/AWWA 23rd Ed., 9223 B
Enzyme Substrate Test (Fecal Coliform)
Street 41/ Chemical section
1. Ieza 2. Al Cruz Atilano, 3. Ariel Audine Manongsong Daylo Abante
388. 9.87 Microbiology — Water and Wastewater
APHA/AWWA 23rd Ed., 9223 B
Total Coliforms Street 41/ Chemical section
1. Daylo Abante 2. Al Cruz Atilano, 3. Anuja
389. Microbiology — Water and Wastewater
NIOSH 0800 & ISO 16000-17:2011
Bioaerosol Sampling (Indoor Air)
Site test 1. Daylo Abante 2. Anuja 3. Van
390. 9.89 Microbiology — Water and Wastewater
WHO, Lab manual of Parasitological and Bacteriological Techniques, 1996
Nematodes (Helminths) Eggs Street 41/ Chemical section
1. Ieza 2. Daylo Ariniente Abante *
391. 10.4 Non Destructive Test
ASTM C805/C805M Standard Test Method for Rebound Number of Hardened Concrete1
Street 41/ NDT Section
1. Jerry Beter 2. Exequiel Victorino Santos, 3. Michael Cahigan 4. Agora, 5. Glenn Oliveros, 6. Abolaji Ishaq Okunola 7. Mohamad Sanaf
392. 3.16 Non Destructive Test
ASTM C900 Standard Test Method for Pullout Strength of Hardened Concrete
In-Situ 1. Jerry Beter 2. Exequiel Victorino Santos, 3. Michael Cahigan 4. Agora, 5. Glenn Oliveros, 6. Abolaji Ishaq Okunola
393. 6.35 Non Destructive Test
ASTM D2950/D2950M
Standard Test Method for Density of Bituminous Concrete in Place by Nuclear Methods
In-Situ 1. Crispin Dela Pena Dela Pena Dela Pena 2.Mohamed Nabil Awad, 3. Salvar Failano Lamarca
TL-343 Page 71 of 112 Arab Center for Engineering Studies ACES-Doha
PWA No. Category Standard/ Method
No. /Date Standard/Method Title &
Section Location /
Facility Authorized Technicians
394. 10.13 Non Destructive Test
ASTM D4541 Standard Test Method for Pull-Off Strength of Coatings Using Portable Adhesion Testers
In-Situ 1. Jerry Beter 2. Exequiel Victorino Santos, 3. Michael Cahigan 4. Agora, 5. Glenn Oliveros, 6. Abolaji Ishaq Okunola
395. 10.1 Non Destructive Test
ASTM D4694 Deflections with a Falling- Weight-Type Impulse Load Device
Street 41/ NDT Section
Yousef Adnan Awad
396. 10.15 Non Destructive Test
ASTM D4787 Standard Practice for Continuity Verification of Liquid or Sheet Linings Applied to Concrete Substrates
In-Situ 1. Michael Cahigan Agora 2. Glenn Oliveros
397. 10.11 Non Destructive Test
ASTM D4945 High-Strain Dynamic Testing of Deep Foundations (Pile Dynamic Test)
In-Situ Gireesh Vellalath
398. 10.15 Non Destructive Test
ASTM D5162 Method B
Standard Practice for Discontinuity (Holiday) Testing of Nonconductive Protective Coating on Metallic Substrates
In-Situ 1. Michael Cahigan Agora 2. Glenn Oliveros
399. 10.9 Non Destructive Test
ASTM D5882 Standard Test Method for Low Strain Impact Integrity Testing of Deep Foundations
In-Situ Jauhar Ali Khan
400. 10.14 Non Destructive Test
ASTM D6132 Standard Test Method for Nondestructive Measurement of Dry Film Thickness of Applied Organic Coatings Using an Ultrasonic Coating Thickness Gage
In-Situ 1. Jerry Beter 2. Michael Cahigan Agora 3. Glenn Oliveros
401. 10.12 Non Destructive Test
ASTM D6167 Conducting Borehole Geophysical Logging: Mechanical Caliper
In-Situ Alexis Legaspi Lorica
402. Non Destructive Test
ASTM D6433 Roads and Parking Lots Pavement Condition Index Surveys, PCI
In-Situ Yousef Adnan Awad
TL-343 Page 72 of 112 Arab Center for Engineering Studies ACES-Doha
PWA No. Category Standard/ Method
No. /Date Standard/Method Title &
Section Location /
Facility Authorized Technicians
403. 10.10 Non Destructive Test
ASTM D6760 Standard Test Method for Integrity Testing of Concrete Deep Foundations by Ultrasonic Crosshole Testing
In-Situ Gireesh Vellalath
404. 10.14 Non Destructive Test
ASTM D7091 Type 2 gage
Standard Practice for Nondestructive Measurement of Dry Film Thickness of Nonmagnetic Coatings Applied to Ferrous Metals and Nonmagnetic, Nonconductive Coatings Applied to Non-Ferrous Metals
Street 41/ NDT section
1. Michael Cahigan Agora 2. Glenn Oliveros 3. Mohamad Sanaf 4. Jerry Jr Pernito Beter
405. Non Destructive Test
ASTM D7234 Standard Test Method for Pull-Off Adhesion Strength of Coatings on Concrete Using Portable Pull-Off Adhesion Testers
Field 1. Mohammed Abdul Hameed Taofeek Abolaji 2. Jerry Better Jhon Oliver
406. Non Destructive Test
ASTM E164 Contact Ultrasonic Testing of Weldments
In-Situ John Oliver
407. 10.17 Non Destructive Test
ASTM E165/E165M/ ASME 0 CLV
Standard Practice for Liquid Penetrant Examination for General Industry
In-Situ Rommel Frando Claridad
408. 6.42 Non Destructive Test
ASTM E303 and TRL Road Note 27
Standard Test Method for Measuring Surface Frictional Properties Using the British Pendulum Tester
Street 41/ NDT Section
1. Adedayo Oluwole Aladesuru
409. 10.16 Non Destructive Test
ASTM E709/ ASME 0 CL V
Standard Guide for Magnetic Particle Testing
In-Situ Rommel Frando Claridad
410. 10.2 Non Destructive Test
ASTM E950/E950M Measuring the Longitudinal Profile of Traveled Surfaces with an Accelerometer Established Inertial Profiling Reference
In-Situ 1. Yousef Adnan Awad Abolaji Ishaq 2. Okunolaq Okunola
411. 6.45 Non Destructive Test
ASTM E1926 and ASTM E950
Standard Practice for Computing International Roughness Index of Roads from Longitudinal Profile Measurements
In-Situ 1. Yousef Adnan Awad Abolaji Ishaq 2. Okunolaq Okunola
TL-343 Page 73 of 112 Arab Center for Engineering Studies ACES-Doha
PWA No. Category Standard/ Method
No. /Date Standard/Method Title &
Section Location /
Facility Authorized Technicians
412. 10.15 Non Destructive Test
ASTM G62 Method B Standard Test Methods for Holiday Detection in Pipeline Coatings
In-Situ 1. Michael Cahigan Agora 2. Glenn Oliveros
413. 10.5 Non Destructive Test
BS 1881-204 Testing concrete (Recommendations on the use of electromagnetic covermeters)
In-Situ 1. Jerry Beter 2. Exequiel Victorino Santos, 3. Michael Cahigan 4. Agora, 5. Glenn Oliveros, 6. Abolaji Ishaq Okunola 7. Mohamad Sanaf
414. 6.76 Non Destructive Test
BS 3262-1 Append. J Determination of Skid Resistance
Street 41/ NDT Section
1. Adedayo Oluwole Aladesuru
415. Non Destructive Test
BS EN 12504-2 Testing concrete in structures Non-destructive testing — (Determination of rebound number)
In-Situ 1. Jerry Beter 2. Exequiel Victorino Santos, 3. Michael Cahigan 4. Agora, 5. Glenn Oliveros, 6. Abolaji Ishaq Okunola
416. Non Destructive Test
BS EN-12504-3 Testing concrete in structures (Determination of pull-out force)
In-Situ 1. Jerry Beter 2. Exequiel Victorino Santos, 3. Michael Cahigan 4. Agora, 5. Glenn Oliveros, 6. Abolaji Ishaq Okunola
417. 10.6 Non Destructive Test
BS EN 12504-4 Determination of ultrasonic pulse velocity
In-Situ 1. Jerry Beter 2. Exequiel Victorino Santos, 3. Michael Cahigan 4. Agora, 5. Glenn Oliveros, 6. Abolaji Ishaq Okunola
418. Non Destructive Test
BS EN 13036-4 Road and airfield surface characteristics. Test methods Method for measurement of slip/skid resistance of a surface: The pendulum test
In-Situ 1. Adedayo Oluwole Aladesuru
TL-343 Page 74 of 112 Arab Center for Engineering Studies ACES-Doha
PWA No. Category Standard/ Method
No. /Date Standard/Method Title &
Section Location /
Facility Authorized Technicians
419. Non Destructive Test
BS EN 13036-7 Road and airfield surface characteristics. Test methods Irregularity measurement of pavement courses. The straightedge test
In-Situ 1. Adedayo Oluwole Aladesuru
420. 10.7 Non Destructive Test
Gauge Manual Crack Width Gauge In-Situ 1. Jerry Beter, 2. Michael Cahigan Agora
421. 10.8 Non Destructive Test
Microscope Manual Crack Measurement Microscope
In-Situ 1. Jerry Beter 2. Michael Cahigan Agora
422. Non Destructive Test
QCS 2014: CL 6-5 & User Guide of Machine
Surface Irregularities Test - By 3 meter long Rolling Straightedge
Street 41/ NDT Section
1. Adedayo Oluwole Aladesuru Mohd Bahnassi
423. Oil ASTM D93 Standard Test Methods for Flash Point by Pensky- Martens Closed Cup Tester
Street 41/ Bitumen Lab
1. Mohamad Abhnassy 2. Adedayo 3. Yaakoub dkhillali . 4. Leslie Tenoria Trumata 5. Marl Wilson Arellano De Vera 6. Lester rosales evangelista 7. Faisal atham bawa
424. Oil ASTM D130 Standard Test Method for Corrosiveness to Copper from Petroleum Products by Copper Strip Test
Street 41/ Bitumen Lab
1. Mohamad Abhnassy 2. Adedayo 3. Yaakoub dkhillali . 4. Leslie Tenoria Trumata 5. Marl Wilson Arellano De Vera 6. Lester rosales evangelista 7. Faisal atham bawa
425. Oil ASTM D445 Standard Test Method for Kinematic Viscosity of Transparent and Opaque Liquids (and Calculation of Dynamic Viscosity) @ 40C
Street 41/ Bitumen Lab
1. Mohamad Abhnassy 2. Adedayo 3. Yaakoub dkhillali . 4. Leslie Tenoria Trumata 5. Marl Wilson Arellano De Vera 6. Lester rosales evangelista 7. Faisal atham bawa
TL-343 Page 75 of 112 Arab Center for Engineering Studies ACES-Doha
PWA No. Category Standard/ Method
No. /Date Standard/Method Title &
Section Location /
Facility Authorized Technicians
426. Oil ASTM D445 Standard Test Method for Kinematic Viscosity of Transparent and Opaque Liquids (and Calculation of Dynamic Viscosity) @ 100C
Street 41/ Bitumen Lab
1. Mohamad Abhnassy 2. Adedayo 3. Yaakoub dkhillali . 4. Leslie Tenoria Trumata 5. Marl Wilson Arellano De Vera 6. Lester rosales evangelista 7. Faisal atham bawa
427. Oil ASTM D664 Standard Test Method for Acid Number of Petroleum Products by Potentiometric Titration
Street 41 / Chemial section
1. Moumene Abdellah 2. Al Cruz
428. Oil ASTM D892 Standard Test Method for Foaming Characteristics of Lubricating Oils
Street 41/ Bitumen Lab
1. Mohamad Abhnassy 2. Adedayo 3. Yaakoub dkhillali 4. Leslie Tenoria Trumata 5. Marl Wilson Arellano De Vera 6. Lester rosales evangelista 7. Faisal atham bawa
429. Oil ASTM D1119 Standard Test Method for Percent Ash Content of Engine Coolants
Street 41 / Chemial section
1. Moumene Abdellah 2. Al Cruz
430. Oil ASTM D1120 Standard Test Method for Boiling Point of Engine Coolants
Street 41/ Bitumen Lab
1. Mohamad Abhnassy 2. Adedayo 3. Yaakoub dkhillali . 4. Leslie Tenoria Trumata 5. Marl Wilson Arellano De Vera 6. Lester rosales evangelista 7. Faisal atham bawa
431. Oil ASTM D1121 Standard Test Method for Reserve Alkalinity of Engine Coolants and Antirusts
Street 41 / Chemial section
1. Moumene Abdellah 2. Al Cruz
432. Oil ASTM D1287 Standard Test Method for pH of Engine Coolants and Antirusts
Street 41 / Chemial section
1. Moumene Abdellah 2. Al Cruz
TL-343 Page 76 of 112 Arab Center for Engineering Studies ACES-Doha
PWA No. Category Standard/ Method
No. /Date Standard/Method Title &
Section Location /
Facility Authorized Technicians
433. Oil ASTM D1298 Standard Test Method for Density, Relative Density, or API Gravity of Crude Petroleum and Liquid Petroleum Products by the Hydrometer Method
Street 41/ Bitumen Lab
1. Mohamad Abhnassy 2. Adedayo 3. Yaakoub dkhillali . 4. Leslie Tenoria Trumata 5. Marl Wilson Arellano De Vera 6. Lester rosales evangelista 7. Faisal atham bawa
434. Oil ASTM D1401 Standard Test Method for Water Separability of Petroleum Oils and Synthetic Fluids
Street 41/ Bitumen Lab
1. Mohamad Abhnassy 2. Adedayo 3. Yaakoub dkhillali . 4. Leslie Tenoria Trumata 5. Marl Wilson Arellano De Vera 6. Lester rosales evangelista 7. Faisal atham bawa
435. Oil ASTM D1500 Standard Test Method for ASTM Color of Petroleum Products (ASTM Color Scale)
Street 41/ Bitumen Lab
1. Mohamad Abhnassy 2. Adedayo 3. Yaakoub dkhillali . 4. Leslie Tenoria Trumata 5. Marl Wilson Arellano De Vera 6. Lester rosales evangelista 7. Faisal atham bawa
436. Oil ASTM D2270 Viscosity Index from Kinematic Viscosity at 40 °C and 100 °C
Street 41/ Bitumen Lab
1. Mohamad Abhnassy 2. Adedayo 3. Yaakoub dkhillali . 4. Leslie Tenoria Trumata 5. Marl Wilson Arellano De Vera 6. Lester rosales evangelista 7. Faisal atham bawa
437. Oil ASTM D2896 Standard Test Method for Base Number of Petroleum Products by Potentiometric Perchloric Acid Titration
Street 41 / Chemial section
1. Moumene Abdellah 2. Al Cruz
TL-343 Page 77 of 112 Arab Center for Engineering Studies ACES-Doha
PWA No. Category Standard/ Method
No. /Date Standard/Method Title &
Section Location /
Facility Authorized Technicians
438. Oil ASTM D3427 Standard Test Method for Air Release Properties of Hydrocarbon Based Oils
Street 41/ Bitumen Lab
1. Mohamad Abhnassy 2. Adedayo 3. Yaakoub dkhillali . 4. Leslie Tenoria Trumata 5. Marl Wilson Arellano De Vera 6. Lester rosales evangelista 7. Faisal atham bawa
439. Oil ASTM D6304 Standard Test Method for Determination of Water in Petroleum Products, Lubricating Oils, and Additives by Coulometric Karl Fischer Titration
Street 41 / Chemial section
1.Thanveer Cresent House 2.Khalid
440. Oil ASTM D7946 Standard Test Method for Initial pH for Petroleum Products
Street 41 / Chemial section
1. Moumene Abdellah 2. Al Cruz
441. 13.19 Paint ASTM D522/D522M Methods for Mandrel Bend Test of Attached Organic Coatings, Method B
Street 41/ Bitumen Lab
1. Mohammed Abdel Hameed 2. Adedayo 3. Glenn Oliveros 4. Mohamad Abhnassy
442. 13.5 Paint ASTM D562 Standard Test Method for Consistency of Paints Measuring Krebs Unit (KU) Viscosity Using a Stormer- Type Viscometer
Street 41/ Bitumen Section
1. Adedayo Oluwolfe Aladesuru 2. Hossam Yakoub
443. 13.2 Paint ASTM D1005 Standard Test Method for Measurement of Dry-Film Thickness of Organic Coatings Using Micrometers
Street 41/ Bitumen Lab
1. Mohammed Abdel Hameed 2. Adedayo 3. Glenn Oliveros 4. Mohamad Abhnassy
444. 13.8 Paint ASTM D1210 Standard Test Method for Fineness of Dispersion of Pigment-Vehicle Systems by Hegman-Type Gage
Street 41/ Bitumen Lab
1. Mohammed Abdel Hameed 2. Adedayo 3. Glenn Oliveros 4. Mohamad Abhnassy
TL-343 Page 78 of 112 Arab Center for Engineering Studies ACES-Doha
PWA No. Category Standard/ Method
No. /Date Standard/Method Title &
Section Location /
Facility Authorized Technicians
445. 13.3 Paint ASTM D1212 Measurement of Wet Film Thickness of Organic Coatings
Street 41/ Polymer Lab
1-Mohamed Bahnassy 2-ADE 3-Yakoub 4-yousra 5-Leslie 6-Ansar
446. 13.1 Paint ASTM D1475 Standard Test Method For Density of Liquid Coatings, Inks, and Related Products
Street 41/ Bitumen Section
1. Adedayo Oluwolfe Aladesuru 2. Hossam Yakoub
447. 13.25 Paint ASTM D1640/D1640M
Standard Test Method for Drying, Curing, or Film Formation of Organic Coatings, Method B
Street 41/ Bitumen Lab
1. Mohammed Abdel Hameed 2. Adedayo 3. Glenn Oliveros 4. Mohamad Abhnassy
448. 13.27 Paint ASTM D1647 Standard Test Methods for Resistance of Dried Films of Varnishes to Water and Alkali
Street 41/ Bitumen Lab
1. Mohammed Abdel Hameed 2. Adedayo 3. Glenn Oliveros 4. Mohamad Abhnassy
449. 13.26 Paint ASTM D2196 Rheological Properties of Non-Newtonian Materials by Rotational Viscometer
Street 41/ Polymer Lab
1-Mohamed Bahnassy 2-ADE 3-Yakoub 4-yousra 5-Leslie 6-Ansar
450. 13.17 Paint ASTM D2369 Standard Test Method for Volatile Content of Coatings
Street 41 / Chemial section
1. Mohammed Abdel Hameed 2. Adedayo 3. Glenn Oliveros 4. Mohamad Abhnassy 5. Leslie Tenoria Trumata
451. 13.22 Paint ASTM D2370 Tensile Properties of Organic Coatings
Street 41/ Geotextile Lab
1-Mohamed Bahnassy 2-ADE 3-Yakoub 4-yousra 5-Leslie 6-Ansar
452. 13.4 Paint ASTM D2486 Standard Test Method for Scrub Resistance of Wall Paints
Street 41/ Bitumen Lab
1. Mohammed Abdel Hameed 2. Adedayo 3. Glenn Oliveros 4. Mohamad Abhnassy
TL-343 Page 79 of 112 Arab Center for Engineering Studies ACES-Doha
PWA No. Category Standard/ Method
No. /Date Standard/Method Title &
Section Location /
Facility Authorized Technicians
453. Paint ASTM D3359 Standard Test Methods for Rating Adhesion by Tape Test
Street 41/ Bitumen Lab
1. Mohammed Abdel Hameed 2. Adedayo 3. Glenn Oliveros 4. Mohamad Abhnassy 5. Jerry Beter
454. 13.14 Paint ASTM D3723 Standard Test Method for Pigment Content of Water- Emulsion Paints by Low- Temperature Ashing
Street 41/ Bitumen Lab
1. Mohammed Abdel Hameed 2. Adedayo 3. Glenn Oliveros 4. Mohamad Abhnassy
455. 13.6 Paint ASTM D4400 Standard Test Method for Sag Resistance of Paints Using a Multinotch Applicator
Street 41/ Bitumen Lab
1. Mohammed Abdel Hameed 2. Adedayo 3. Glenn Oliveros 4. Mohamad Abhnassy
456. Paint ASTM D4414 Standard Practice for Measurement of Wet Film Thickness by Notch Gages
Street 41/ Bitumen Lab
1. Mohammed Abdel Hameed 2. Adedayo 3. Glenn Oliveros 4. Mohamad Abhnassy
457. 13.13 Paint ASTM D4541 Adhesion (Pull off) strength In- Situ 1-Jhon 2-Jerry 458. 13.15 Paint ASTM D5401 & BS
EN ISO 2812-2 Standard Test Method for Evaluating Clear Water Repellent Coatings on Wood
Street 41/ Bitumen Lab
1. Mohammed Abdel Hameed 2. Adedayo 3. Glenn Oliveros 4. Mohamad Abhnassy
459. 13.11 Paint BS EN ISO 787-9 Determination of pH value of aqueous suspension
Street 41/ Chemical Section
1. Muneer MC 2. Al Cruz Atilano
460. 13.20 Paint BS EN ISO 1519 BS 3900-E1
Paints and varnishes. Bend test (cylindrical mandrel).
Street 41/ Bitumen Lab
1. Mohammed Abdel Hameed 2. Adedayo 3. Glenn Oliveros 4. Mohamad Abhnassy
TL-343 Page 80 of 112 Arab Center for Engineering Studies ACES-Doha
PWA No. Category Standard/ Method
No. /Date Standard/Method Title &
Section Location /
Facility Authorized Technicians
461. 13.12 Paint BS EN ISO 2409 (BS 3900-E9)
Paints and varnishes. Cross-cut test.
Street 41/ Bitumen Lab
1. Mohammed Abdel Hameed 2. Adedayo 3. Glenn Oliveros 4. Mohamad Abhnassy 5. Jerry Beter
462. 13.7 Paint BS EN ISO 2813, ASTM D523
Paints and Varnishes - Determination of Specular Gloss of Non-Metallic Paint Films at 20o and 60o and 85o
Street 41/ Bitumen Lab
1. Mohammed Abdel Hameed 2. Adedayo 3. Glenn Oliveros 4. Mohamad Abhnassy
463. Paint BS EN ISO 2814 Average Reflectance (Calculation Method)
Street 41/ Bitumen Lab
1. Mohammed Abdel Hameed 2. Adedayo 3. Glenn Oliveros 4. Mohamad Abhnassy
464. 13.10 Paint BS EN ISO 2814 Paints and varnishes - Comparison of contrast ratio (hiding power) of paints of the same type and colour
Street 41/ Bitumen Lab
1. Mohammed Abdel Hameed 2. Adedayo 3. Glenn Oliveros 4. Mohamad Abhnassy
465. Paint BS EN ISO 4624 Paints and varnishes. Pull- off test for adhesion.
Street 41/ Bitumen Lab
1. Mohammed Abdel Hameed 2. Adedayo 3. Glenn Oliveros 4. Mohamad Abhnassy 5. Leslie Tenoria Trumata
466. 13.9 Paint ISO 7724-2 Determination of color and color difference
Street 41/ Polymer Lab
1-Mohamed Bahnassy 2-ADE 3-Yakoub 4-yousra 5-Leslie 6-Ansar
467. Pavement Markings
AASHTO M249 Standard Specification for White and Yellow Reflective Thermoplastic Striping Material (Solid Form) (Daylight reflectance at 45°)
Street 41/Bitumen Lab
1. Adedayo Oluwole Aladesuru 2. Piyal Kumara
TL-343 Page 81 of 112 Arab Center for Engineering Studies ACES-Doha
PWA No. Category Standard/ Method
No. /Date Standard/Method Title &
Section Location /
Facility Authorized Technicians
468. Pavement Markings
AASHTO M249 Standard Specification for White and Yellow Reflective Thermoplastic Striping Material (Solid Form) (Drying Time for Road Marking)
Street 41/Bitumen Lab
1. Adedayo Oluwole Aladesuru 2. Piyal Kumara
469. 6.68 Pavement Markings
AASHTO T250 CL 5 and ASTM D4797
Standard Method of Test for Thermoplastic Traffic Line Material (Determination of Binder Content)
Street 41/Bitumen Lab
1. Adedayo Oluwole Aladesuru 2. Piyal Kumara
470. 6.68 Pavement Markings
AASHTO T250 CL 6 and ASTM D4797 CL 11
Standard Method of Test for Thermoplastic Traffic Line Material (Determination of Glass beads Content)
Street 41/Bitumen Lab
Adedayo Aladesuru Piyal Kumara, Benderson
471. 6.81 Pavement Markings
ASTM D4414 Standard Practice for Measurement of Wet Film Thickness by Notch Gages
Street 41/Bitumen Lab
1. Adedayo Aladesuru 2. Piyal Kumara 3. Benderson
472. 6.75 Pavement Markings
ASTM E1710 Measurement of Retroreflective Pavement Marking Materials with CEN-Prescribed Geometry Using a Portable Retroreflectometer
Street 41/Bitumen Lab
1. Adedayo Aladesuru 2. Piyal Kumara 3. Benderson
473. Pavement Markings
ASTM E2302 Measurement of the Luminance Coefficient Under Diffuse Illumination of Pavement Marking Materials Using a Portable Reflectometer
Street 41/Bitumen Lab
1. Adedayo Oluwole Aladesuru 2. Piyal Kumara
474. 6.70 Pavement Markings
BS 2000-35 Petroleum and its Products. Determination of flash and fire Point-Pensky - Martens method (Flash Point (Open) of Thermoplastic Material)
Street 41/Bitumen Lab
Adedayo Aladesuru Piyal Kumara Benderson
475. 6.65 Pavement Markings
BS 3262-1 Append. C
Binder Content of Thermoplastic Material
Street 41/Bitumen Lab
Adedayo Aladesuru Piyal Kumara Benderson
476. 6.67 Pavement Markings
BS 3262-1 Append. D
Glass Bead Content of Thermoplastic Material
Street 41/Bitumen Lab
Adedayo Aladesuru Piyal Kumara Benderson
TL-343 Page 82 of 112 Arab Center for Engineering Studies ACES-Doha
PWA No. Category Standard/ Method
No. /Date Standard/Method Title &
Section Location /
Facility Authorized Technicians
477. 6.72 Pavement Markings
BS 3262-1 Append. D
Combined Gradation of Material
Street 41/Bitumen Lab
1-Mohamed Bahnassy 2-ADE 3-Yakoub
478. 6.78 Pavement Markings
BS 3262-1 Append. F
Hot-applied thermoplastic road marking materials and mixtures — Specification for constituent materials and mixtures (Luminance Factor)
Street 41/Bitumen Lab
1. Mohamad Abhnassy 2. Adedayo 3. Yaakoub dkhillali . 4. Leslie Tenoria Trumata 5. Marl Wilson Arellano De Vera 6. Lester rosales evangelista 7. Faisal atham bawa
479. 6.71 Pavement Markings
BS 3262-1 Append. H
Determination of Flow Resistance
Street 41/Bitumen Lab
Adedayo Aladesuru Piyal Kumara Benderson
480. 6.79 Pavement Markings
BS 3262-3–Ap. B Hot-applied thermoplastic road marking materials and mixtures — Specification for application of material to road surfaces (Drying Film Thickness)
Street 41/Bitumen Lab
1. Mohamad Abhnassy 2. Adedayo 3. Yaakoub dkhillali . 4. Leslie Tenoria Trumata 5. Marl Wilson Arellano De Vera 6. Lester rosales evangelista 7. Faisal atham bawa
481. 6.69 Pavement Markings
BS 3262-3 Append. C
Determination of density Street 41/Bitumen Lab
Adedayo Aladesuru Piyal Kumara Benderson
482. 6.73 Pavement Markings
BS 6088 Appendix B Solid glass beads for use with road marking compounds and for other industrial uses (Particle Size Distribution of Glass Beads)
Street 41/Bitumen Lab
Adedayo Aladesuru Piyal Kumara Benderson
483. 6.74 Pavement Markings
BS EN 1436 Annex A&B
Road marking materials — Road marking performance for road users (Measurement of Retro- reflectivity of pavement marking materials)
Street 41/Bitumen Lab
Adedayo Aladesuru Piyal Kumara Benderson
484. 6.80 Pavement Markings
BS EN 13197 Annex C / 2011
Wet Film Thickness by Notch Gauge
Street 41/Bitumen Lab
1. Adedayo Aladesuru 2. Piyal Kumara 3. Benderson
TL-343 Page 83 of 112 Arab Center for Engineering Studies ACES-Doha
PWA No. Category Standard/ Method
No. /Date Standard/Method Title &
Section Location /
Facility Authorized Technicians
485. Performance Graded Asphalt Binder
AASHTO R29 Standard Practice for Grading or Verifying the Performance Grade ( PG ) of an Asphalt Binder
Street 41/Bitumen Lab
1. Adedayo oluwole aladesuru 2. Benderson
486. 6.5 Performance Graded Asphalt Binder
ASTM D5/D5M Standard Test Method for Penetration of Bituminous Materials
Street 41/Bitumen Lab
1. Mohamad Abhnassy 2. Adedayo 3. Yaakoub dkhillali . 4. Leslie Tenoria Trumata 5. Marl Wilson Arellano De Vera 6. Lester rosales evangelista 7. Faisal atham bawa
487. 6.10 Performance Graded Asphalt Binder
ASTM D6/D6M Standard Test Method for Loss on Heating of Oil and Asphaltic Compounds
Street 41/Bitumen Lab
1. Mohamad Abhnassy 2. Adedayo 3. Yaakoub dkhillali . 4. Leslie Tenoria Trumata 5. Marl Wilson Arellano De Vera 6. Lester rosales evangelista 7. Faisal atham bawa
488. 6.6 Performance Graded Asphalt Binder
ASTM D36/D36M Standard Test Method for Softening Point of Bitumen (Ring-and-Ball Apparatus)
Street 41/Bitumen Lab
1. Mohamad Abhnassy 2. Adedayo 3. Yaakoub dkhillali . 4. Leslie Tenoria Trumata 5. Marl Wilson Arellano De Vera 6. Lester rosales evangelista 7. Faisal atham bawa
489. 6.4 Performance Graded Asphalt Binder
ASTM D70 Density of Semi-Solid Bituminous Material (Pycnometer Method)
Street 41/Bitumen Lab
1. Mohamad Abhnassy 2. Adedayo 3. Yaakoub dkhillali . 4. Leslie Tenoria Trumata 5. Marl Wilson Arellano De Vera 6. Lester rosales evangelista 7. Faisal atham bawa
490. Performance Graded Asphalt Binder
ASTM D88 Saybolt Viscosity Street 41/Bitumen Lab
1. Adedayo oluwole aladesuru 2. Benderson
TL-343 Page 84 of 112 Arab Center for Engineering Studies ACES-Doha
PWA No. Category Standard/ Method
No. /Date Standard/Method Title &
Section Location /
Facility Authorized Technicians
491. 6.7 Performance Graded Asphalt Binder
ASTM D92 and AASHTO T048
Standard Test Method for Flash and Fire Points by Cleveland Open Cup Tester
Street 41/Bitumen Lab
1. Adedayo oluwole aladesuru 2. Benderson
492. 6.18 Performance Graded Asphalt Binder
ASTM D95 Water in Petroleum Products and Bituminous Material by Distillation
Street 41/Bitumen Lab
1. Adedayo oluwole aladesuru 2. Benderson
493. 6.8 Performance Graded Asphalt Binder
ASTM D113 Standard Test Method for Ductility of Bituminous Materials
Street 41/Bitumen Lab
1. Adedayo oluwole aladesuru 2. Benderson
494. Performance Graded Asphalt Binder
ASTM D139 Standard Test Method for Float Test for Bituminous Materials
Street 41/Bitumen Lab
1. Adedayo oluwole aladesuru 2. Benderson
495. 6.1 Performance Graded Asphalt Binder
ASTM D140 Standard Practice for Sampling Bituminous Materials
Street 41/Bitumen Lab
1. Adedayo oluwole aladesuru 2. Benderson
496. 6.2 Performance Graded Asphalt Binder
ASTM D402/D402M Standard Test Method for Distillation of Cutback Asphalt
Street 41/Bitumen Lab
1. Adedayo oluwole aladesuru 2. Benderson
497. 6.9 Performance Graded Asphalt Binder
ASTM D2042 and AASHTO T44
Solubility of Asphalt Material In Trichloroethylene
Street 41/Bitumen Lab
1. Mohamad Abhnassy 2. Adedayo 3. Yaakoub dkhillali . 4. Leslie Tenoria Trumata 5. Marl Wilson Arellano De Vera 6. Lester rosales evangelista 7. Faisal atham bawa
498. Performance Graded Asphalt Binder
ASTM D2170/D2170M
Kinematic Viscosity @ 60°C Street 41/Bitumen Lab
1. Adedayo oluwole aladesuru 2. Benderson
499. 6.16 Performance Graded Asphalt Binder
ASTM D2872 and AASHTO T240
Test Method for Effect of Heat and Air on a Moving Film of Asphalt (Rolling Thin-Film Oven Test) RTFOT
Street 41/Bitumen Lab
1. Mohamad Abhnassy 2. Adedayo 3. Yaakoub dkhillali . 4. Leslie Tenoria Trumata 5. Marl Wilson Arellano De Vera 6. Lester rosales evangelista 7. Faisal atham bawa
TL-343 Page 85 of 112 Arab Center for Engineering Studies ACES-Doha
PWA No. Category Standard/ Method
No. /Date Standard/Method Title &
Section Location /
Facility Authorized Technicians
500. 6.3 Performance Graded Asphalt Binder
ASTM D2995 Standard Practice for Estimating Application Rate of Bituminous Distributors
Street 41/Bitumen Lab
1. Adedayo oluwole aladesuru 2. Benderson
501. 6.12 Performance Graded Asphalt Binder
ASTM D4402/D4402M and AASHTO T316
Standard Test Method for Viscosity Determination of Asphalt at Elevated Temperatures Using a Rotational Viscometer (RV)
Street 41/Bitumen Lab
1. Adedayo oluwole aladesuru 2. Benderson
502. 6.20 Performance Graded Asphalt Binder
ASTM D5546 Standard Test Method for Solubility of Asphalt Binders in Toluene by Centrifuge
Street 41/Bitumen Lab
1. Mohamad Abhnassy 2. Adedayo 3. Yaakoub dkhillali . 4. Leslie Tenoria Trumata 5. Marl Wilson Arellano De Vera 6. Lester rosales evangelista 7. Faisal atham bawa
503. 6.15 Performance Graded Asphalt Binder
ASTM D6521 and AASHTO R28
Standard Practice for Accelerated Aging of Asphalt Binder Using a Pressurized Aging Vessel (PAV)
Street 41/Bitumen Lab
1. Mohamad Abhnassy 2. Adedayo 3. Yaakoub dkhillali . 4. Leslie Tenoria Trumata 5. Marl Wilson Arellano De Vera 6. Lester rosales evangelista 7. Faisal atham baw7
504. 6.13 Performance Graded Asphalt Binder
ASTM D6648 and AASHTO T313
Standard Test Method for Determining the Flexural Creep Stiffness of Asphalt Binder Using the Bending Beam Rheometer (BBR)
Street 41/Bitumen Lab
1. Adedayo oluwole aladesuru 2. Benderson
505. Performance Graded Asphalt Binder
ASTM D6930 Settlement and Storage Stability of Emulsified Asphalts
Street 41/Bitumen Lab
1. Adedayo oluwole aladesuru 2. Benderson
506. Performance Graded Asphalt Binder
ASTM D6933 Standard Test Method for Oversized Particles in Emulsified Asphalts (Sieve Test)
Street 41/Bitumen Lab
1. Adedayo oluwole aladesuru 2. Benderson
507. Performance Graded Asphalt Binder
ASTM D6935 Standard Test Method for Determining Cement Mixing of Emulsified Asphalt
Street 41/Bitumen Lab
1. Adedayo oluwole aladesuru 2. Benderson
TL-343 Page 86 of 112 Arab Center for Engineering Studies ACES-Doha
PWA No. Category Standard/ Method
No. /Date Standard/Method Title &
Section Location /
Facility Authorized Technicians
508. Performance Graded Asphalt Binder
ASTM D6997 Distillation of Emulsified Asphalt
Street 41/Bitumen Lab
1. Adedayo oluwole aladesuru 2. Benderson
509. 6.19 Performance Graded Asphalt Binder
ASTM D7173 Standard Practice for Determining the Separation Tendency of Polymer from Polymer Modified Asphalt
Street 41/Bitumen Lab
1. Adedayo oluwole aladesuru 2. Benderson
510. 6.14 Performance Graded Asphalt Binder
ASTM D7175 and AASHTO T315
Standard Test Method for Determining the Rheological Properties of Asphalt Binder Using a Dynamic Shear Rheometer (DSR)
Street 41/Bitumen Lab
1. Mohamad Abhnassy 2. Adedayo 3. Yaakoub dkhillali . 4. Leslie Tenoria Trumata 5. Marl Wilson Arellano De Vera 6. Lester rosales evangelista 7. Faisal atham bawa
511. 6.17 Performance Graded Asphalt Binder
ASTM D7405 and AASHTO T350
Standard Test Method for Multiple Stress Creep and Recovery (MSCR) of Asphalt Binder Using a Dynamic Shear Rheometer
Street 41/Bitumen Lab
1. Adedayo oluwole aladesuru 2. Benderson
512. Performance Graded Asphalt Binder
ASTM D7496 Standard Test Method for Viscosity of Emulsified Asphalt by Saybolt Furol Viscometer
Street 41/Bitumen Lab
1. Adedayo oluwole aladesuru 2. Benderson
513. 6.69 Performance Graded Asphalt Binder
BS 3262-3 Append. C
Determination of density Street 41/Bitumen Lab
1. Adedayo oluwole aladesuru 2. Benderson
514. 6.62 Performance Graded Asphalt Binder
BS EN 1426, BS 2000-49
Determination of Needle Penetration
Street 41/Bitumen Lab
1. Adedayo oluwole aladesuru 2. Benderson
515. 6.63 & 6.66
Performance Graded Asphalt Binder
BS EN 1427-2007, BS 2000-58
Bitumen and bituminous binders - (Determination of Softening Point (Ring & Ball Method))
Street 41/Bitumen Lab
1. Adedayo oluwole aladesuru 2. Benderson
TL-343 Page 87 of 112 Arab Center for Engineering Studies ACES-Doha
PWA No. Category Standard/ Method
No. /Date Standard/Method Title &
Section Location /
Facility Authorized Technicians
516. Performance Graded Asphalt Binder
BS EN 12595, BS 2000-319
Methods of test for petroleum and its products BS 2000-319: Bitumen and bituminous binders - Determination of kinematic viscosity (Identical with IP 319-2000)
Street 41/Bitumen Lab
1. Mohammed Abdelmoein 2. Ibrahim Bahnassy 3. Adedayo Oluwole Aladesuru. 4. Piyal Kumara
517. Performance Graded Asphalt Binder
BS EN 12607-1 BS 2000-460.1
Methods of test for petroleum and its products - BS 2000-460.1: Bitumen and bituminous binders - Determination of the resistance to hardening under the influence of heat and air Part 1: RTFOT method (Identical with IP 460.1:2000)
Street 41/Bitumen Lab
1. Mohammed Abdelmoein 2. Ibrahim Bahnassy 3. Adedayo Oluwole Aladesuru. 4. Piyal Kumara
518. Performance Graded Asphalt Binder
BS EN 13589, BS 2000-520
Methods of test for petroleum and its products — BS 2000-520: Bitumen and bituminous binders — Determination of the tensile properties of modified bitumen by the force ductility method (Identical with IP 520- 2004)
Street 41/Bitumen Lab
1. Mohammed Abdelmoein 2. Ibrahim Bahnassy 3. Adedayo Oluwole Aladesuru. 4. Piyal Kumara
519. Performance Graded Asphalt Binder
BS EN 22592, BS 2000-403, ISO 2592
Methods of test for Petroleum and its Products Part 403. Petroleum products - determination of flash and fire points - Cleveland open cup method (Identical with IP 403/94)
Street 41/Bitumen Lab
1. Mohammed Abdelmoein 2. Ibrahim Bahnassy 3. Adedayo Oluwole Aladesuru. 4. Piyal Kumara
520. PVC Pipe BS EN 580 Resistance to Dichloromethane
Chemical Lab Room 7, Street 41, Industrial Area
1- Mohamed Bahnaasy 2- Kareem Shokri
TL-343 Page 88 of 112 Arab Center for Engineering Studies ACES-Doha
PWA No. Category Standard/ Method
No. /Date Standard/Method Title &
Section Location /
Facility Authorized Technicians
521. 99.99 PVC Pipe BS EN 744, BS 2782-11 Method 1108C
Plastics piping and ducting systems. Thermoplastics pipes. Test method for resistance to external blows by the round-the- clock method.
Street 41 Lab / Membrane / Geotextile Section
1- Mohamed Bahnaasy 2- David Onishile
522. 99.99 PVC Pipe BS EN 1411, BS 2782-11 Method 1108B
Plastics piping and ducting systems. Thermoplastics pipes. Determination of resistance to external blows by the staircase method
Street 41 Lab / Membrane / Geotextile Section
1- Mohamed Bahnaasy 2- David Onishile
523. PVC Pipe BS EN ISO 2505 Longitudinal Reversion Soil Lab GF-6, Street 41, Industrial Area
1- Mohamed Bahnaasy 2- Kareem Shokri
524. PVC Pipe BS EN 61386-1, CL 7.6 / GSO 32, CL 4.3
Marking and documentation Geotextile & Membrane, Lab 29, Street 41
1- Mohamed Bahnaasy 2- Kareem Shokri
525. PVC Pipe BS EN 61386-1, CL 8 & Annex B.1 / GSO 32, CL 4.4
Dimensions Geotextile & Membrane, Lab 29, Street 41
1- Mohamed Bahnaasy 2- Kareem Shokri
526. PVC Pipe BS EN 61386-1, CL 10.2.GSO 32, CL 5
Compression test Geotextile & Membrane, Lab 29, Street 41
1- Bahnaasy 2- Kareem Shukri
527. PVC Pipe EN 61386-1, CL 10.3 / GSO 32, CL 10
Impact Test Geotextile & Membrane, Lab 29, Street 41
1- Mohamed Bahnaasy 2- Kareem Shokri
528. PVC Pipe EN 61386-1, CL 10.4, IEC 61386-21 CL 10.4.102 GSO 32, CL 6.2
Bending Test Geotextile & Membrane, Lab 29, Street 41
1- Mohamed Bahnaasy 2- Kareem Shokri
529. PVC Pipe EN 61386-1, CL 10.6, IEC 61386-21 CL 10.6.102, GSO 32,CL 11
Collapse test Geotextile & Membrane, Lab 29, Street 41
1- Mohamed Bahnaasy 2- Kareem Shokri
TL-343 Page 89 of 112 Arab Center for Engineering Studies ACES-Doha
PWA No. Category Standard/ Method
No. /Date Standard/Method Title &
Section Location /
Facility Authorized Technicians
530. PVC Pipe EN 61386-1, CL 13.1.3.2 / GSO 32 CL 8
Fire hazard Outside Corridor between building near Soil/Aggregate Sample Door, Street 41
1- Mohamed Bahnaasy 2- Kareem Shokri
531. Reaction to fire tests
ISO 1716 Reaction to fire tests for products — Determination of the gross heat of combustion (calorific value)
Street 41/Main Lab
1-Mohamed Jamal 2-sujan shrestha 3-Mohamed Aslam 4-Arif Hasain
532. Reaction to fire tests
BS EN ISO 9239-1 Reaction to fire tests for floorings - Part 1: Determination of the burning behaviour using a radiant heat source.
Street 41/Main Lab
1. Mohamed Aslam 2.Mohamed Jamal 3.Sujan Shrestha 4.Ahmed Rashed
533. Reaction to fire tests
ISO 11925-2 Reaction to fire tests — Ignitability of products subjected to direct impingement of flame — Part 2: Single-flame source test
Street 41/Main Lab
1-Mohamed Jamal 2-sujan shrestha 3-Mohamed Aslam 4-Arif Hasain
534. 1.4 Soil ASTM D1140 Determining the Amount of Material Finer than 75-μm (No. 200) Sieve in Soils by Washing
Street 41/Soil Lab
1-Sunday 2- Bles Molah 3- Mohammed Jamal. 4- Ahmed Rasheed. 5- Yasin Hosny .
535. 1.8 Soil ASTM D1556/D1556M
Standard Test Method for Density and Unit Weight of Soil in Place by Sand-Cone Method
Street 41/Soil Lab
1- Sunday 2- Bles Molah 3- Mohammed Jamal. 4- Ahmed Rasheed. 5- Yasin Hosny .
TL-343 Page 90 of 112 Arab Center for Engineering Studies ACES-Doha
PWA No. Category Standard/ Method
No. /Date Standard/Method Title &
Section Location /
Facility Authorized Technicians
536. 1.6 Soil ASTM D1557 Standard Test Methods for Laboratory Compaction Characteristics of Soil Using Modified Effort (56,000 ft-lbf/ft3 (2,700 kN-m/m3))
Street 41/Soil Lab
1-Mohammed Jamal abd El-Radi 2- Sunday izukwe 3- Ahamed abo-bakr al- lisy 4- Masoud Ghali 5- Ahmed Shaban 6- Hassan Ali 7- Mohamed Aslam 8- Ahamed Mahmoud Rashed 9- Mohamed Anifa Maskoor 10- Bles nforneh molah
537. 1.11 Soil ASTM D1883 CBR (California Bearing Ratio) of Laboratory- Compacted Soils (Soaked)
Street 41/Soil Lab
1-Sunday 2- Bles Molah 3- Mohammed Jamal. 4- Ahmed Rasheed. 5- Mohamad Aslam Nagoor 6- Abayomi Philip 7- Irshad Ansari 8- Arif Hussain 9- Victor Chidiadi 10- Massoud Kamel 11- Maskkor Mohamed anifa
538. 1.2 Soil ASTM D2216-10 Standard Test Methods for Laboratory Determination of Water (Moisture) Content of Soil and Rock by Mass
Street 41/Soil Lab
1- Sunday 2- Bles Molah 3- Mohammed Jamal 4- Ahmed Rasheed 5- Yasin Hosny
539. 1.5 Soil ASTM D4318 Standard Test Methods for Liquid Limit, Plastic Limit, and Plasticity Index of Soils
Street 41/Soil Lab
1-Sunday 2- Bles Molah 3- Mohammed Jamal. 4- Ahmed Rasheed. 5- Mohamad Aslam Nagoor 6- Abayomi Philip 7- Irshad Ansari 8- Arif Hussain 9- Victor Chidiadi 10- Massoud Kamel 11- Maskkor Mohamed Anifa
TL-343 Page 91 of 112 Arab Center for Engineering Studies ACES-Doha
PWA No. Category Standard/ Method
No. /Date Standard/Method Title &
Section Location /
Facility Authorized Technicians
540. 1.12 Soil ASTM D4429 Standard Test Method for CBR (California Bearing Ratio) of Soils in Place
Street 41/Soil Lab
1-Sunday 2- Bles Molah 3- Mohammed Jamal 4- Ahmed Rasheed 5-Mohamad Aslam Nagoor 6-Abayomi Philip 7-Irshad Ansari 8-Arif Hussain 9-Victor Chidiadi 10-Massoud Kamel 11-Maskkor Mohamed anifa
541. 1.7 Soil ASTM D4718/D4718M
Standard Practice for Correction of Unit Weight and Water Content for Soils Containing Oversize Particles
Street 41/Soil Lab
1- Sunday 2- Bles Molah 3- Mohammed Jamal. 4- Ahmed Rasheed.
542. 1.10 Soil ASTM D4944 Field Determination of Water (Moisture) Content of Soil by the Calcium Carbide Gas Pressure Tester
Street 41/Soil Lab
1-Sunday 2- Bles Molah 3- Mohammed Jamal 4- Ahmed Rasheed 5- Yasin Hosny
543. Soil ASTM D5334 Standard Test Method for Determination of Thermal Conductivity of Soil and Soft Rock by Thermal Needle Probe Procedure
Street 41/Soil Lab
1-Glenn Oliveros 2-Michael Cahigan Agora Mohammed 3-Jamal Mohammed abdulhamid
544. 1.3 1.11
Soil ASTM D6913 Standard Test Methods for Particle-Size Distribution (Gradation) of Soils Using Sieve Analysis
Street 41/Soil Lab
1- Sunday 2- Bles Molah 3- Mohammed Jamal 4- Ahmed Rasheed 5- Yasin Hosny
545. 1.9 Soil ASTM D6938 Standard Test Method for In-Place Density and Water Content of Soil and Soil- Aggregate by Nuclear Methods (Shallow Depth)
Street 41/Soil Lab
1- Crispin 2- mohd Nabil 3- Renial 4- Alshabah 5- Eroul 6- Marlod 7- Roberto 8- JR 9- Salvar
TL-343 Page 92 of 112 Arab Center for Engineering Studies ACES-Doha
PWA No. Category Standard/ Method
No. /Date Standard/Method Title &
Section Location /
Facility Authorized Technicians
546. Soil ASTM D7625 Abrasiveness of Rock Using the CERCHAR Method
Street 41/Soil Lab
1- Sunday 2- Mohammed Jamal 3- Ahmed Rasheed 4-Irshed Ansari
547. 1.14 Soil BS 1377-2 CL 3.2 Methods of test for Soils for civil engineering purposes (Determination of Moisture Content (Oven Drying method))
Street 41/Soil Lab
1- Sunday 2- Bles Molah 3- Mohammed Jamal. 4- Ahmed Rasheed.
548. 1.15 Soil BS 1377-2 CL 4.3 Determination of liquid Limit (Cone Penetrometer)
Street 41/Soil Lab
1- Sunday 2- Bles Molah 3- Mohammed Jamal. 4- Ahmed Rasheed.
549. 1.16 Soil BS 1377-2 CL 4.5 Determination of Liquid Limit (Casagrande Method)
Street 41/Soil Lab
1- Sunday 2- Bles Molah 3- Mohammed Jamal 4- Ahmed Rasheed 5- Yasin Hosny
550. 1.17 Soil BS 1377-2 CL 5 Methods of test for Soils for civil engineering purposes (Determination of Plastic Limit and Plasticity Index)
Street 41/Soil Lab
1- Sunday 2- Bles Molah 3- Mohammed Jamal. 4- Ahmed Rasheed. 5- Yasin Hosny .
551. Soil BS 1377-2 CL 6.5 Methods of test for Soils for civil engineering purposes (Linear shrinkage)
Street 41/Soil Lab
1-Tohidul Islam Ashraful Islam 2-Sunday Ifeanyichukwu Izukwe 3-Mohammed Gamal Abdulradi Alsayed 4-Mohammed Abdulhamid Abdulalim Ali 5-Esosa Simeon Omwanghe
552. 1.18 Soil BS 1377-2 CL 9.2 Determination of Particle Size Distribution (Wet Sieve Method)
Street 41/Soil Lab
1- Sunday 2- Bles Molah 3- Mohammed Jamal. 4- Ahmed Rasheed.
553. 1.19 Soil BS 1377-2 CL 9.3 Determination of Patricle Size Distribution (Dry Sieve Method)
Street 41/Soil Lab
1- Sunday 2- Bles Molah 3- Mohammed Jamal. 4- Ahmed Rasheed.
TL-343 Page 93 of 112 Arab Center for Engineering Studies ACES-Doha
PWA No. Category Standard/ Method
No. /Date Standard/Method Title &
Section Location /
Facility Authorized Technicians
554. 1.20 Soil BS 1377-4 CL 3.2 & 3.5 & 3.6
Methods of test for Soils for civil engineering purposes Compaction Related Test (Proctor Test) (Using 4.5 kg Rammer)
Street 41/Soil Lab
1- Sunday 2- Bles Molah 3- Mohammed Jamal. 4- Ahmed Rasheed.
555. 1.21 Soil BS 1377-4 CL 7 Determination of California Bearing Ration (CBR)
Street 41/Soil Lab
1- Mohammed Gamal 2- Abdulradi Alsayed (1) 3- Yassine Hosni (1) 4- Mohammed Abdulhamid 5-Abdulalim Ali (1) 6- Bles Nforneh Molah(1) 7- Sunday Ifeanyichukwu 8- Izukwe Ifeanyichukwu Izukwe (2) 9- Ahmed Mahmoud Rashid 10- Ahmed (2)
556. 1.22 Soil BS 1377-9 CL 2.1 In-Situ Density Test (Sand Replacement Method- Small Pouring Cylinder)
Street 41/Soil Lab
1- Sanjay Kumar Sah 2- Rom Bahadur Ale 3- Ian Bueno Janerol
557. 1.23 Soil BS 1377-9 CL 2.2 Methods of test for Soils for civil engineering purposes (In-Situ Density Test (Sand Replacement Method - Large Pouring Cylinder))
Street 41/Soil Lab
1- Sanjay Kumar Sah 2- Rom Bahadur Ale 3- Ian Bueno Janerol
558. 1.24 Soil BS 1377-9 CL 2.5 Methods of test for Soils for civil engineering purposes (In-Situ Density Test (Nuclear Gauge Method))
Street 41/Soil Lab
1- Crispin Dela Pena Dela Pena 2- Mohamed Nabil Awad, 3- Salvar Failano Lamarca
559. 8.21 Soil BS 1377-9 CL 4.1 Determination of the vertical deformation of soil by plate loading test
Street 41/Soil Lab
1- Sunday 2- Bles Molah 3- Mohammed Jamal. 4- Ahmed Rasheed.
TL-343 Page 94 of 112 Arab Center for Engineering Studies ACES-Doha
PWA No. Category Standard/ Method
No. /Date Standard/Method Title &
Section Location /
Facility Authorized Technicians
560. Soil BS EN 13286-41 Unbound and hydraulically bound mixtures (Test method for determination of the compressive strength of hydraulically bound mixtures)
Street 41/Soil Lab
Glenn Oliveros Michael Cahigan Agora
561. Soil BS EN 13286-51 Unbound and hydraulically bound mixtures (Method for the manufacture of test specimens of hydraulically bound mixtures using vibrating hammer compaction)
Street 41/Soil Lab
Glenn Oliveros Michael Cahigan Agora
562. Soil BS EN ISO 17892-1 Determination of water content
Street 41/Soil Lab
1- Sunday 2- Mohammed Jamal. 3- Ahmed Rasheed. 4-Irshed Ansari
563. Soil BS EN ISO 17892-2 Determination of bulk density
Street 41/Soil Lab
1- Sunday 2- Mohammed Jamal. 3- Ahmed Rasheed. 4-Irshed Ansari
564. Soil ISO/TS 17892 Determination of Atterberg limits
Street 41/Soil Lab
1- Sunday 2- Mohammed Jamal. 3- Ahmed Rasheed. 4-Irshed Ansari
565. 7.2 Steel ASTM A370 CL 6 Mechanical Testing of Steel Products
Street 41/ Metallurgy Lab
1. Rommel Frando Claridad
566. Steel ASTM A615/A615M Deformed and Plain Carbon-Steel Bars for Concrete Reinforcement
Street 41/ Metallurgy Lab
1. Rommel Frando Claridad
567. 7.10 Steel ASTM A931 Standard Test Method for Tension Testing of Wire Ropes and Strand
Street 41/ Steel Lab
Rommel Claridard
568. 7.9 Steel ASTM A1061/ A1061M & A416/ A416M
Yield Strength— Elongation - Breaking Strength
Street 41/ Metallurgy Lab
1. Rommel Frando Claridad 2. Robert Tambic
569. 7.3 Steel BS 4449 App.C, CL 6.1
Bend Test Street 41/ Metallurgy Lab
1. Rommel Frando Claridad 2. Robert Tambic
TL-343 Page 95 of 112 Arab Center for Engineering Studies ACES-Doha
PWA No. Category Standard/ Method
No. /Date Standard/Method Title &
Section Location /
Facility Authorized Technicians
570. 7.4 Steel BS 4449: App.E CL E1.6
Rebend Test Street 41/ Metallurgy Lab
1. Rommel Frando Claridad 2. Robert Tambic
571. 7.11 Steel BS EN 124 CL 8 Load Test Street 41/ Metallurgy Lab
1. Rommel Frando Claridad
572. - Steel BS EN 124-1 Load Test Street 41/ Metallurgy Lab
Rommel Claridard
573. - Steel BS EN 124-2 Load Test- Gully tops and manhole tops made of cast iron
Street 41/ Metallurgy Lab
Rommel Claridard
574. - Steel BS EN 124-3 Load Test- Gully tops and manhole tops made of steel or aluminum alloys
Street 41/ Metallurgy Lab
1. Rommel Frando Claridad 2. Robert Tambic
575. - Steel BS EN 124-4 Load Test- Gully tops and manhole tops made of steel reinforced concrete
Street 41/ Metallurgy Lab
Rommel Claridard
576. - Steel BS EN 124-5 Load Test- Gully tops and manhole tops made of composite materials
Street 41/ Metallurgy Lab
Rommel Claridard
577. - Steel BS EN 124-6 Load Test- Gully tops and manhole tops made of polypropylene (PP), polyethylene (PE) or unplasticized poly (vinyl chloride) (PVC-U)
Street 41/ Metallurgy Lab
Rommel Claridard
578. Steel BS EN ISO 6892-1- CL 18 & BS 4449+A3 (App.C, CL 1.4 & ISO 15630-1 CL 5 (E)
Metallic Materials Tensile Testing (Tensile Test)
Street 41/ Metallurgy Lab
1. Rommel Frando Claridad
579. 7.1 Steel BS EN 10002-1 Tensile Test Street 41/ Metallurgy Lab
1. Rommel Frando Claridad
580. 7.8 Steel ISO 15630-3(E) + BS 5896
Tensile test - Yield Strength— Elongation
Street 41/ Metallurgy Lab
1. Rommel Frando Claridad 2. Robert Tambic
581. Steel Chemistry ASTM E415 Standard Test Method for Analysis of Carbon and Low- Alloy Steel by Spark Atomic Emission Spectrometry (C, Si,S, P, Mn, Ni, Cr, Mo,Cu, Sn, Al, V, Pb, V )
Strteet 41/ NDT Section
Thanveer Cresent House
TL-343 Page 96 of 112 Arab Center for Engineering Studies ACES-Doha
PWA No. Category Standard/ Method
No. /Date Standard/Method Title &
Section Location /
Facility Authorized Technicians
582. Thermal performance of building material and products
BS EN 12664 Thermal performance of building materials and products - Determination of thermal resistance (R value) by heat flow meter method.
Street 41/ Main Lab
1. Sujan Shrestha 2. Mohamed Jamal 3.Bles Molah 4. Ahmed Rashed
583. Toys BS EN 71-1 Safety of toys. Mechanical and physical properties, CL 8.8 Compression test, CL 8.9 Soaking test-clause, CL 8.4 Tension test-clause, CL 8.5 Drop test-clause, CL 8.21 Static strength test, CL 8.2 Small parts cylinder, CL 8.11 Sharpness of edges, CL 8.12 Sharpness of points, CL 8.10 thru 8.10.3 Accessibility of a part or component
Street 41 / Soil section
1. Mohamed Jamal 2. Bles Molah 3. Mohamed Aslam 4. Ahmed rashed 5. Sujen
584. Toys BS EN 71-2 +A1 Flammability test Street 41 / Soil section
1. Mohamed Jamal 2. Bles Molah 3. Mohamed Aslam 4. Ahmed rashed
585. Toys BS EN 71-3 +A2-3 Safety of Toys: Migration of Certain Elements – Aluminum, Antimony, Arsenic, Barium, Boron, Cadmium, Chromium (III), Chromium (VI), Cobalt, Copper, Lead, Manganese, Mercury, Nickel, Selenium, Strontium, Tin, Zinc
Street 41 / Chemical section
1. Ariel Audine Manongsong, 2. Ria Luna
586. UPVC Pipe ASTM D256 – 04 Method A
Standard Test Methods for Determining the Izod Pendulum Impact Resistance of Plastics Method A
Street 41/Main Lab
1. Mohamed Abdelhameed 2. Jerry Beter 3. Glenn Oliver 4. Romel
TL-343 Page 97 of 112 Arab Center for Engineering Studies ACES-Doha
PWA No. Category Standard/ Method
No. /Date Standard/Method Title &
Section Location /
Facility Authorized Technicians
587. UPVC Pipe BS EN ISO 527-1 CL 10.1
Plastics — Determination of tensile properties Part 1: General principles, 10.1 Stress
Street 41/Main Lab
1. Mohamed Bahnassy 2. David 3. Mohamed Abdelhameed 4. Jerry Beter 5. Glenn Oliver 6. Romel
588. UPVC Pipe BS EN ISO 527-2 Plastics — Determination of tensile properties — Part 2: Test conditions for moulding and extrusion plastics
Street 41/Main Lab
1. Mohamed Bahnassy 2. David 3. Mohamed Abdelhameed 4. Jerry Beter 5. Glenn Oliver 6. Romel
589. UPVC Pipe BS EN 727:1995 Plastics piping and ducting systems — Thermoplastics pipes and fittings — Determination of Vicat softening temperature (VST)
Street 41/Main Lab
1. Mohamed Abdelhameed 2. Jerry Beter 3. Glenn Oliver 4. Romel
590. UPVC Pipe BS EN 1401-1 CL 6.2 Plastic piping systems for non-pressure underground drainage and sewerage — Unplasticized poly(vinyl chloride) (PVC-U) Part 1: Specifications for pipes, fittings and the system, Cl 5.1 Appearance,colour, Cl 5.2 Colour, Cl 6.2.1 Outside diameters Cl 6.2.2 Out of roundness Cl 6.2.5 Wall thickness
Street 41/Main Lab
1. Mohamed Abdelhameed 2. Jerry Beter 3. Glenn Oliver 4. Romel
591. UPVC Pipe BS EN 1401-1 CL 12 Plastic piping systems for non-pressure underground drainage and sewerage — Unplasticized poly(vinyl chloride) (PVC-U) Part 1: Specifications for pipes, fittings and the system 12. Marking
Street 41/Main Lab
1. Mohamed Abdelhameed 2. Jerry Beter 3. Glenn Oliver 4. Romel
TL-343 Page 98 of 112 Arab Center for Engineering Studies ACES-Doha
PWA No. Category Standard/ Method
No. /Date Standard/Method Title &
Section Location /
Facility Authorized Technicians
592. UPVC Pipe EN ISO 3126 CL 5.2, 5.3.2, 5.3.3, 5.3.4, 5.4
Plastics piping systems — Plastics components — Determination of dimensions, 5.2 Wall Thickness 5.3.2 Measurement of maximum and minimum diameter, 5.3.3 Mean Outside Diameter, 5.3.4 Mean Inside Diameter, 5.4 Out-of-Roundness
Street 41/Main Lab
1. Mohamed Abdelhameed 2. Jerry Beter 3. Glenn Oliver 4. Romel
593. UPVC Pipe ISO 1167-1 Thermoplastics pipes, fittings and assemblies for the conveyance of fluids — Determination of the resistance to internal pressure — Part 1: General method
Street 41/Main Lab
1. Mohamed Abdelhameed 2. Jerry Beter 3. Glenn Oliver 4. Romel
594. UPVC Pipe ISO 1167-2 Thermoplastics pipes, fittings and assemblies for the conveyance of fluids — Determination of the resistance to internal pressure — Part 2: Preparation of pipe test pieces
Street 41/Main Lab
1. Mohamed Abdelhameed 2. Jerry Beter 3. Glenn Oliver 4. Romel
595. UPVC Pipe ISO 1183-1 CL 5.1 Plastics — Methods for determining the density of non-cellular plastics Part 1: Immersion method, liquid pyknometer 5.1 Method A — Immersion method
Street 41/Main Lab
1. Mohamed Bahnassy 2. David 3. Mohamed Abdelhameed 4. Jerry Beter 5. Glenn Oliver 6. Romel
596. UPVC Pipe ISO 2505:2005 Thermoplastics pipes — Longitudinal reversion — Test method and parameters
Street 41/Main Lab
1. Mohamed Abdelhameed 2. Jerry Beter 3. Glenn Oliver 4. Romel
597. 11.16 Water proofing Membrane & Rubber
ASTM D412 Tensile strength of Vulcanized Rubber and Thermoplastic Elastomers
Street 41/ Geotextile & Membrane Lab
1. Mohamed Bahnaasy 2. David Onishile 3. Jim Bajarias
TL-343 Page 99 of 112 Arab Center for Engineering Studies ACES-Doha
PWA No. Category Standard/ Method
No. /Date Standard/Method Title &
Section Location /
Facility Authorized Technicians
598. 11.21 Water proofing Membrane & Rubber
ASTM D543 Evaluating the Resistance of Plastics to Chemical Reagents
Street 41/ Geotextile & Membrane Lab
1. Mohamed Bahnaasy 2. David Onishile 3. Jim Bajarias
599. 11.20 Water proofing Membrane & Rubber
ASTM D570 Water Absorption of Plastics Street 41/ Geotextile & Membrane Lab
1. Mohamed Bahnaasy 2. David Onishile 3. Jim Bajarias
600. 11.14 Water proofing Membrane & Rubber
ASTM D638 Tensile Properties of Plastics Street 41/ Geotextile & Membrane Lab
1. Mohamed Bahnaasy 2. David Onishile 3. Jim Bajarias
601. Water proofing Membrane & Rubber
ASTM D714 Sulphuric Acid Immersion Test of Internal Lining
Street 41/ Geotextile & Membrane, & Chemical Section
1. Mohamed Bahnaasy 2. David Onishile 3. Jim Bajarias
602. Water proofing Membrane & Rubber
ASTM D792 Density and Specific Gravity (Relative Density) of Plastics by Displacement
Street 41/ Geotextile & Membrane Lab
1. Mohamed Bahnaasy 2. David Onishile 3. Jim Bajarias
603. Water proofing Membrane & Rubber
ASTM D882 Tensile Properties of Thin Plastic Sheeting
Street 41/ Geotextile & Membrane Lab
1. Mohamed Bahnaasy 2. David Onishile 3. Jim Bajarias
604. Water proofing Membrane & Rubber
ASTM D903 Peel or Stripping Strength of Adhesive Bonds
Street 41/ Geotextile & Membrane Lab
1. Mohamed Bahnaasy 2. David Onishile 3. Jim Bajarias
605. 11.18 Water proofing Membrane & Rubber
ASTM D1000 Pressure-Sensitive Adhesion to Primed Concrete
Street 41/ Geotextile & Membrane Lab
1. Mohamed Bahnaasy 2. David Onishile 3. Jim Bajarias
606. 11.17 Water proofing Membrane & Rubber
ASTM D1004 Tear Resistance (Graves Tear) of Plastic Film and Sheeting
Street 41/ Geotextile & Membrane Lab
1. Mohamed Bahnaasy 2. David Onishile 3. Jim Bajarias
607. Water proofing Membrane & Rubber
ASTM D1238 Melt Flow Rates of Thermoplastics by Extrusion Plastometer
Street 41/ Geotextile & Membrane Lab
1. Mohamed Bahnaasy 2. David Onishile 3. Jim Bajarias
608. Water proofing Membrane & Rubber
ASTM D1653 Vapor Permeability of Internal
Street 41/ Geotextile & Membrane Lab
1. Mohamed Bahnaasy 2. David Onishile 3. Jim Bajarias
609. Water proofing Membrane & Rubber
ASTM D1709 Impact Resistance of Plastic Film by the Free- Falling Dart Method
Street 41/ Geotextile & Membrane Lab
1. Mohamed Bahnaasy 2. David Onishile 3. Jim Bajarias
TL-343 Page 100 of 112 Arab Center for Engineering Studies ACES-Doha
PWA No. Category Standard/ Method
No. /Date Standard/Method Title &
Section Location /
Facility Authorized Technicians
610. Water proofing Membrane & Rubber
ASTM D1876 Peel Resistance of Adhesives (T-Peel Test)
Street 41/ Geotextile & Membrane Lab
1. Mohamed Bahnaasy 2. David Onishile 3. Jim Bajarias
611. 11.24 Water proofing Membrane & Rubber
ASTM D2240 Rubber Property— Durometer Hardness
Street 41/ Geotextile & Membrane Lab
1. Mohamed Bahnaasy 2. David Onishile 3. Jim Bajarias
612. 11.27 Water proofing Membrane & Rubber
ASTM D3767 Rubber—Measurement of Dimensions (Thickness)
Street 41/ Geotextile & Membrane Lab
1. Mohamed Bahnaasy 2. David Onishile 3. Jim Bajarias
613. 13.21 Water proofing Membrane & Rubber
ASTM D4060 Abrasion Resistance of Organic Coatings by the Taber Abraser
Street 41/ Geotextile & Membrane Lab
1. Mohamed Bahnaasy 2. David Onishile 3. Jim Bajarias
614. 11.22 Water proofing Membrane & Rubber
ASTM E96/E96M Water Vapor Transmission of Materials
Street 41/ Geotextile & Membrane Lab
1. Mohamed Bahnaasy 2. David Onishile 3. Jim Bajarias
615. 11.19 Water proofing Membrane & Rubber
ASTM E154 CL 10 Resistance to Puncture Street 41/ Geotextile & Membrane Lab
1. Mohamed Bahnaasy 2. David Onishile 3. Jim Bajarias
616. 11.26 Water proofing Membrane & Rubber
BS EN 1849-2 Determination of thickness and mass per unit area of Plastic and rubber sheets
Street 41/ Geotextile & Membrane Lab
1. Mohamed Bahnaasy 2. David Onishile 3. Jim Bajarias
617. Water proofing Membrane & Rubber
DIN 53854 Weight Street 41/ Geotextile & Membrane Lab
1. Mohamed Bahnaasy 2. David Onishile 3. Jim Bajarias
618. Water proofing Membrane & Rubber
DIN 53855 Thickness Street 41/ Geotextile & Membrane Lab
1. Mohamed Bahnaasy 2. David Onishile 3. Jim Bajarias
619. Water proofing Membrane & Rubber
DIN 54307 CBR test Street 41/ Geotextile & Membrane Lab
1. Mohamed Bahnaasy 2. David Onishile 3. Jim Bajarias
620. 11.15 Water proofing Membrane & Rubber
ISO 527-1 Tensile Properties of Plastics Street 41/ Geotextile & Membrane Lab
1. Mohamed Bahnaasy 2. David Onishile 3. Jim Bajarias
621. 2.4 Aggregates ASTM C117 Standard Test Method for Materials Finer than 75-μm (No. 200) Sieve in Mineral Aggregates by Washing
ACES Site Lab 1 - Al Bustan
1. Mohamed Riyas 2. Irshad Ansari 3. Esosa Simeon 4. Hafsal Cheriya
TL-343 Page 101 of 112 Arab Center for Engineering Studies ACES-Doha
PWA No. Category Standard/ Method
No. /Date Standard/Method Title &
Section Location /
Facility Authorized Technicians
622. 2.6 Aggregates ASTM C127 Standard Test Method for Relative Density (Specific Gravity) and Absorption of Coarse Aggregate
ACES Site Lab 1 - Al Bustan
1. Irshad Ansari 2. Esosa Simeon 3. Hafsal Cheriya
623. 2.5 Aggregates ASTM C128 Standard Test Method for Relative Density (Specific Gravity) and Absorption of Fine Aggregate
ACES Site Lab 1 - Al Bustan
1. Irshad Ansari 2. Esosa Simeon 3. Hafsal Cheriya
624. 2.3 Aggregates ASTM C136/C136M Standard Test Method for Sieve Analysis of Fine and Coarse Aggregates
ACES Site Lab 1 - Al Bustan
1. Mohamed Riyas 2. Irshad Ansari 3. Esosa Simeon 4. Hafsal Cheriya Simeon 4. Hafsal Cheriya
625. 2.17 Aggregates ASTM C142/C142M Standard Test Method for Clay Lumps and Friable Particles in Aggregates
ACES Site Lab 1 - Al Bustan
1. Irshad Ansari 2. Esosa Simeon
626. 2.2 Aggregates ASTM C702/C702M Standard Practice for Reducing Samples of Aggregate to Testing Size
ACES Site Lab 1 - Al Bustan
1. Mohamed Riyas 2. Irshad Ansari 3. Esosa Simeon 4. Hafsal Cheriya
627. 2.1 Aggregates ASTM D75/D75M Standard Practice forSampling Aggregates
ACES Site Lab 1 - Al Bustan
1. Mohamed Riyas 2. Irshad Ansari 3. Esosa Simeon
628. 2.16 Aggregates ASTM D2419 Standard Test Method for Sand Equivalent Value of Soils and Fine Aggregate
ACES Site Lab 1 - Al Bustan
1. Irshad Ansari 2. Esosa Simeon 3. Hafsal Cheriya
629. 2.7 Aggregates ASTM D4791 Standard Test Method for Flat Particles, Elongated Particles, or Flat and Elongated Particles in Coarse Aggregate
ACES Site Lab 1 - Al Bustan
1. Irshad Ansari 2. Esosa Simeon 3. Hafsal Cheriya
630. 2.11 Aggregates BS 812-102 Testing aggregates. Methods for sampling
ACES Site Lab 1 - Al Bustan
1. Irshad Ansari 2. Esosa Simeon
631. 2.14 Aggregates BS 812-110 Testing aggregates. Methods for determination of aggregate crushing value (ACV)
ACES Site Lab 1 - Al Bustan
1. Irshad Ansari 2. Esosa Simeon
TL-343 Page 102 of 112 Arab Center for Engineering Studies ACES-Doha
PWA No. Category Standard/ Method
No. /Date Standard/Method Title &
Section Location /
Facility Authorized Technicians
632. 2.13 Aggregates BS 812-111 Testing aggregates. Methods for determination of ten per cent fines value (TFV)
ACES Site Lab 1 - Al Bustan
1. Irshad Ansari 2. Esosa Simeon
633. 2.10 Aggregates BS EN 932-1 Tests for general properties of aggregates. Methods for sampling
ACES Site Lab 1 - Al Bustan
1. Mohamed Riyas 2. Irshad Ansari 3. Esosa Simeon
634. 2.9 Aggregates BS EN 932-2 Tests for general properties of aggregates. Methods for reducing laboratory samples
ACES Site Lab 1 - Al Bustan
1. Mohamed Riyas 2. Irshad Ansari 3. Esosa Simeon
635. 2.8 Aggregates BS EN 933-1 Tests for geometrical properties of aggregates. Determination of particle size distribution. Sieving method
ACES Site Lab 1 - Al Bustan
1. Mohamed Riyas 2. Irshad Ansari 3. Esosa Simeon
636. 2.15 Aggregates BS EN 933-3 Tests for geometrical properties of aggregates. Determination of particle shape. Flakiness index
ACES Site Lab 1 - Al Bustan
1. Irshad Ansari 2. Esosa Simeon
637. 2.18 Aggregates BS EN 933-7 Tests for geometrical properties of aggregates. Determination of shell content. Percentage of shells in coarse aggregates
ACES Site Lab 1 - Al Bustan
1. Esosa Simeon
638. 2.12 Aggregates BS EN 1097-6 Tests for mechanical and physical properties of aggregates. Determination of particle density and water absorption
ACES Site Lab 1 - Al Bustan
1. Mohamed Riyas 2. Irshad Ansari 3. Esosa Simeon
639. 4.2 Asphalt AASHTO R47 Reducing Samples of Hot Mix Asphalt (HMA) to Testing Size
ACES Site Lab 1 - Al Bustan
1. Hamil Hassan 2. Mohamed Riyas 3. Esosa Simeon
640. 4.1 Asphalt ASTM D979/D979M Standard Practice for Sampling Bituminous Paving Mixtures
ACES Site Lab 1 - Al Bustan
1. Hamil Hassan 2. Mohamed Riyas 3. Esosa Simeon 4. Nnoku Ekane
641. 4.8 Asphalt ASTM D2041/D2041M
Standard Test Method for Theoretical Maximum Specific Gravity and Density of Bituminous Paving Mixtures
ACES Site Lab 1 - Al Bustan
1. Mohamed Riyas 2. Esosa Simeon 3. Hamil Hassan
TL-343 Page 103 of 112 Arab Center for Engineering Studies ACES-Doha
PWA No. Category Standard/ Method
No. /Date Standard/Method Title &
Section Location /
Facility Authorized Technicians
642. 4.5 Asphalt ASTM D2172/D2172 Standard Test Methods for Quantitative Extraction of Asphalt Binder from Asphalt Mixtures
ACES Site Lab 1 - Al Bustan
1. Mohamed Riyas 2. Esosa Simeon
643. 4.7 Asphalt ASTM D2726/D2726M
Standard Test Method for Bulk Specific Gravity and Density of Non-Absorptive Compacted Asphalt Mixtures
ACES Site Lab 1 - Al Bustan
1. Mohamed Riyas 2. Esosa Simeon 3. Hamil Hassan
644. 4.12 Asphalt ASTM D2995 Standard Practice for Estimating Application Rate and Residual Application Rate of Bituminous Distributors
ACES Site Lab 1 - Al Bustan
Mr. Nnoku Ekane Mr. Mohamed Riyas Mr. Esosa Simeon Mr. Hamil Hassan
645. 4.11 Asphalt ASTM D3203/D3203M
Standard Test Method for Percent Air Voids in Compacted Asphalt Mixtures
ACES Site Lab 1 - Al Bustan
1. Mohamed Riyas 2. Esosa Simeon 3. Hamil Hassan
646. 4.9 Asphalt ASTM D3549/D3549M
Standard Test Method for Thickness or Height of Compacted Asphalt Mixture Specimens
ACES Site Lab 1 - Al Bustan
1. Mohamed Riyas 2. Esosa Simeon 3. Hamil Hassan
647. 4.3 Asphalt ASTM D5361/D5361M
Standard Practice for Sampling Compacted Asphalt Mixtures for Laboratory Testing
ACES Site Lab 1 - Al Bustan
1. Nnoku Ekane 2. Mohamed Riyas 3. Esosa Simeon 4. Hamil Hassan
648. 4.6 Asphalt ASTM D5444 Standard Test Method for Mechanical Size Analysis of Extracted Aggregate
ACES Site Lab 1 - Al Bustan
1. Mohamed Riyas 2. Esosa Simeon
649. 4.4 Asphalt ASTM D6926 Standard Practice for Preparation of Asphalt Mixture Specimens Using Marshall Apparatus
ACES Site Lab 1 - Al Bustan
1. Mohamed Riyas 2. Esosa Simeon 3. Hamil Hassan
650. 4.10 Asphalt ASTM D6927 Standard Test Method for Marshall Stability and Flow of Asphalt Mixtures
ACES Site Lab 1 - Al Bustan
1. Mohamed Riyas 2. Esosa Simeon
651. 4.13 Asphalt BS EN 12697-27 Bituminous mixtures Test methods for hot Mix Asphalt - Part 27: Sampling
ACES Site Lab 1 - Al Bustan
1. Hamil Hassan 2. Mohamed Riyas 3. Esosa Simeon 4. Nnoku Ekane
TL-343 Page 104 of 112 Arab Center for Engineering Studies ACES-Doha
PWA No. Category Standard/ Method
No. /Date Standard/Method Title &
Section Location /
Facility Authorized Technicians
652. 3.1 Concrete BS EN 12350-1 Testing fresh concrete. Sampling
ACES Site Lab 1 - Al Bustan
1. Heyford Attuah 2. Thasleem 3. Danilo Ramos 4. Jaime Bautista 5. Bhim Kunwar
653. 3.2 Concrete BS EN 12350-2 Testing fresh concrete. Slump-test
ACES Site Lab 1 - Al Bustan
1. Heyford Attuah 2. Thasleem 3. Danilo Ramos 4. Jaime Bautista 5. Bhim Kunwar
654. 3.4 Concrete BS EN 12390-1 Testing hardened concrete. Shape, dimensions and other requirements for specimens and moulds
ACES Site Lab 1 - Al Bustan
1. Sajid Tagayan 2. Esosa Simeon 3. Thasleem
655. 3.3 Concrete BS EN 12390-2 Testing hardened concrete. Making and curing specimens for strength tests
ACES Site Lab 1 - Al Bustan
1. Heyford Attuah 2. Thasleem 3. Danilo Ramos 4. Jaime Bautista 5. Bhim Kunwar
656. 3.7 Concrete BS EN 12390-3: Annex B
Testing hardened concrete. Compressive strength of test specimens
ACES Site Lab 1 - Al Bustan
1. Sajid Tagayan 2. Thasleem 3. Esosa Simeon
657. 3.5 Concrete BS EN 12390-7 Testing hardened concrete. Density of hardened concrete
ACES Site Lab 1 - Al Bustan
1. Sajid Tagayan 2. Esosa Simeon 3. Thasleem
658. 3.6 Concrete BS EN 12504-1 Testing concrete in structures. Cored specimens. Taking, examining and testing in compression
ACES Site Lab 1 - Al Bustan
1. Sajid Tagayan 2. Esosa Simeon 3. Thasleem
659. 1.5 Soil ASTM D698 Standard Test Methods for Laboratory Compaction Characteristics of Soil Using Standard Effort (12 400 ft-lbf/ft3 (600 kN- m/m3))
ACES Site Lab 1 - Al Bustan
1. Irshad Ansari 2. Hafsal Cheriya 3. Esosa Simeon
660. 1.4 Soil ASTM D1140 Determining the Amount of Material Finer than 75-μm (No. 200) Sieve in Soils by Washing
ACES Site Lab 1 - Al Bustan
1. Esosa Simeon 2. Irshad Ansari 3. Hafsal Cheriya
TL-343 Page 105 of 112 Arab Center for Engineering Studies ACES-Doha
PWA No. Category Standard/ Method
No. /Date Standard/Method Title &
Section Location /
Facility Authorized Technicians
661. 1.8 Soil ASTM D1556 Standard Test Method for Density and Unit Weight of Soil in Place by Sand-Cone Method
ACES Site Lab 1 - Al Bustan
1. Irshad Ansari 2. Hafsal Cheriya
662. 1.6 Soil ASTM D1557 Standard Test Methods for Laboratory Compaction Characteristics of Soil Using Modified Effort (56,000 ft-lbf/ft3 (2,700 kN-m/m3))
ACES Site Lab 1 - Al Bustan
1. Irshad Ansari 2. Hafsal Cheriya 3. Esosa Simeon
663. 1.11 Soil ASTM D1883 CBR (California Bearing Ratio) of Laboratory- Compacted Soils (Soaked)
ACES Site Lab 1 - Al Bustan
1. Irshad Ansari 2. Hafsal Cheriya 3. Esosa Simeon
664. 1.2 Soil ASTM D2216 Standard Test Methods for Laboratory Determination of Water (Moisture) Content of Soil and Rock by Mass
ACES Site Lab 1 - Al Bustan
1. Irshad Ansari 2. Hafsal Cheriya 3. Esosa Simeon
665. 1.3 Soil ASTM D4318 Standard Test Methods for Liquid Limit, Plastic Limit, and Plasticity Index of Soils
ACES Site Lab 1 - Al Bustan
1. Irshad Ansari 2. Hafsal Cheriya 3. Esosa Simeon
666. 1.9 Soil ASTM D4718/D4718M
Standard Practice for Correction of Unit Weight and Water Content for Soils Containing Oversize Particles
ACES Site Lab 1 - Al Bustan
1. Irshad Ansari 2. Hafsal Cheriya 3. Esosa Simeon
667. 1.11 Soils ASTM D6913 Standard Test Methods for Particle-Size Distribution (Gradation) of Soils Using Sieve Analysis
ACES Site Lab 1 - Al Bustan
1. Esosa Simeon 2. Irshad Ansari 3. Hafsal Cheriya
668. - Asphalt AASHTO R47 Reducing Samples nof Hot Mix Asphalt (HMA) to Testing Size
ACES Site Lab 2 - Al Khor
1. Tohidul Islam 2. HMM Azam 3. Mohamed Rizwan 4. Mojahid Ansari 5. Njoh Yannick 6. Mohamed Arshath
TL-343 Page 106 of 112 Arab Center for Engineering Studies ACES-Doha
PWA No. Category Standard/ Method
No. /Date Standard/Method Title &
Section Location /
Facility Authorized Technicians
669. 6.22 Asphalt ASTM D979/D979M Sampling Bituminous Paving Mixtures
ACES Site Lab 2 - Al Khor
1. Mam Azam 2. Samyog Dhakal 3. Sembo Kosimee 4. Anselme Wameni 5. Abdul Alim 6. Salifou Sufah 7. Bola Lawal 8. Sagar Upreti 9. Mojahid Ansari 10. Hmm Azam 11. Mohamed Arafath 12. Tohidul Islam 13. Njoh Yannick
670. 6.27 Asphalt ASTM D2041/D2041M
Maximum Specific Gravity and Density
ACES Site Lab 2 - Al Khor
1. Njoh Yannick 2. Tohidul Islam 3. Mojahid Ansari 4. Peter Omoshuli
671. 6.32 Asphalt ASTM D2172/D2172M
Quantitative Extraction of Bitumen from Bituminous Paving Mixtures Section 7d
ACES Site Lab 2 - Al Khor
1. Njoh Yannick 2. Mohamed Riswan 3. Mohamed Arshath 4. Tohidul Islam
672. 6.25 Asphalt ASTM D2726/D2726M
Bulk Specific Gravity and Density
ACES Site Lab 2 - Al Khor
1. Njoh Yannick 2. Tohidul Islam 3. Mojahid Ansari 4. Mohamed Arafath 5. HMM Azam
673. 6.3 Asphalt ASTM D2995 Application Rate of Bituminous Distributors
ACES Site Lab 2 - Al Khor
1. Tohidul Islam 2. HMM Azam 3. Mohamed Arafath 4. Mohamed Rizwan 5. Mojahid Ansari 6. Mam Azam 7. Abdul Alim 8. Njoh Yannick 9. Samyog Dhakal 10. Sembo Kosimee
674. - Asphalt ASTM D3203/D3203M
Percent Air Voids in Compacted Dense and Open Bituminous Paving Mixtures
ACES Site Lab 2 - Al Khor
1. Njoh Yannick 2. Mojahid Ansari3. Tohidul Islam
TL-343 Page 107 of 112 Arab Center for Engineering Studies ACES-Doha
PWA No. Category Standard/ Method
No. /Date Standard/Method Title &
Section Location /
Facility Authorized Technicians
675. 6.26 Asphalt ASTM D3549/D3549M
Thickness of Asphalt Specimen
ACES Site Lab 2 - Al Khor
1. Njoh Yannick 2. Tohidul Islam 3. Mojahid Ansari 4. Mohamed Arafath s 5. HMM Azam b
676. 6.23 Asphalt ASTM D5361/D5361M
Sampling Compacted Bituminous Mixtures for Laboratory Testing
ACES Site Lab 2 - Al Khor
1. Asagar Ali 2. Miya Safi 3. Tohidul Islam 4. Njoh Yannick
677. 6.34 Asphalt ASTM D5444 Mechanical Size Analysis of Extracted Aggregate
ACES Site Lab 2 - Al Khor
1. Njoh Yannick2. Mohamed Riswan3. Mohamed Arshath4. Tohidul Islam
678. 6.24 Asphalt ASTM D6926 Preparation of Bituminous Specimens Using Marshall Apparatus
ACES Site Lab 2 - Al Khor
1. Mojahid Ansari 2. Sagar Upreti 3. Salifou Sufah 4. Hmm Azam 5. Njoh Yannick 6. Tohidul Islam
679. 6.30 Asphalt ASTM D6927 Marshall Stability and Flow of Bituminous Mixtures
ACES Site Lab 2 - Al Khor
1. Njoh Yannick 2. Tohidul Islam 3. Mojahid Ansari 4. HMM Azam
680. Asphalt BS EN 12697 Bituminous Mixtures - Test methods for hot mix asphalt - Part 27: Sampling Cl 4.3 Sampling from the Material Around the Augers of the Paver
ACES Site Lab 2 - Al Khor
681. 2.4 Aggregates ASTM C117 Material Finer than 0.075 mm
ACES Site Lab - Mesaimeer
1. Nishadh Deepal 2. Uzor Ikechukwu 3. Aneesh Babu 4. Frank
682. 2.6 Aggregates ASTM C127 Determination of Specific Gravity and Water Absorption of Coarse Aggregate
ACES Site Lab - Mesaimeer
1. Nishadh Deepal 2. Uzor Ikechukwu 3. Aneesh Babu 4. Frank
683. 2.5 Aggregates ASTM C128 Determination of Specific Gravity and Water Absorption of Fine Aggregate
ACES Site Lab - Mesaimeer
1. Nishadh Deepal 2. Uzor Ikechukwu 3. Aneesh Babu 4. Frank
TL-343 Page 108 of 112 Arab Center for Engineering Studies ACES-Doha
PWA No. Category Standard/ Method
No. /Date Standard/Method Title &
Section Location /
Facility Authorized Technicians
684. 2.3 Aggregates ASTM C136/C136M Particle Size Distribution ACES Site Lab - Mesaimeer
1. Nishadh Deepal 2. Uzor Ikechukwu 3. Aneesh Babu 4. Frank
685. 2.7 Aggregates ASTM C142/C142M Test Method for Clay Lumps and Friable Particles in Aggregates
ACES Site Lab - Mesaimeer
1. Nishadh Deepal 2. Aneesh Babu 3. Frank
686. 2.2 Aggregates ASTM C702/C702M Reducing Samples to Testing Size
ACES Site Lab - Mesaimeer
1. Nishadh Deepal 2. Uzor Ikechukwu 3. Aneesh Babu 4. Frank
687. 2.1 Aggregates ASTM D75/D75M Sampling of Aggregates ACES Site Lab - Mesaimeer
1. Nishadh Deepal 2. Uzor Ikechukwu 3. Aneesh Babu 4. Frank
688. 2.15 Aggregates ASTM D546 Sieve Analysis of Mineral Filler for Bituminous paving Mixtures
ACES Site Lab - Mesaimeer
1. Nishad Deepal 2. Aneesh Babu 3. Frank
689. 1.13 Aggregates ASTM D2419 Sand Equivalent Value ACES Site Lab - Mesaimeer
1. Nishadh Deepal 2. Uzor Ikechukwu 3. Aneesh Babu 4. Frank
690. 2.10 Aggregates ASTM D4791 Flat and Elongated Particles ACES Site Lab - Mesaimeer
1. Nishadh Deepal 2. Aneesh Babu 4. Frank
691. - Aggregates BS EN 932-1 Methods for sampling Aggregates
ACES Site Lab - Mesaimeer
1. Nishadh Deepal 2. Uzor Ikechukwu 3. Aneesh Babu 4. Frank
692. - Aggregates BS EN 932-2 Methods for reducing laboratory samples
ACES Site Lab - Mesaimeer
1. Nishadh Deepal 2. Uzor Ikechukwu 3. Aneesh Babu 4. Frank
693. 2.23 Aggregates BS EN 933-1 Determination of Particle Size Distribution - Sieving Method
ACES Site Lab - Mesaimeer
1. Nishadh Deepal 2. Uzor Ikechukwu 3. Aneesh Babu 4. Frank
TL-343 Page 109 of 112 Arab Center for Engineering Studies ACES-Doha
PWA No. Category Standard/ Method
No. /Date Standard/Method Title &
Section Location /
Facility Authorized Technicians
694. 2.29 Aggregates BS EN 933-3 Determination of particleshape — Flakiness index
ACES Site Lab - Mesaimeer
1. Nishadh Deepal2. Aneesh Babu3. Frank
695. 2.28 Aggregates BS EN 933-7 Determination of shell content - Percentage of shells in coarse aggregates
ACES Site Lab - Mesaimeer
1. Nishadh Deepal 2. Aneesh Babu 3. Frank
696. - Asphalt AASHTO R47 Reducing Samples of Hot Mix Asphalt (HMA) to Testing Size
ACES Site Lab - Mesaimeer
1. Nishadh Deepal 2. Mostafa Mohamed 3. Aneesh Babu
697. 6.22 Asphalt ASTM D979/D979M Sampling Bituminous Paving Mixtures
ACES Site Lab - Mesaimeer
1. Mohamed Riswan 2. Nishadh Deepal 3. Mostafa Mohamed 4. Aneesh Babu
698. 6.27 Asphalt ASTM D2041/D2041M
Maximum Specific Gravity and Density
ACES Site Lab - Mesaimeer
1. Nishadh Deepal 2. Mostafa Mohamed 3. Aneesh Babu
699. 6.32 Asphalt ASTM D2172/D2172M
Quantitative Extraction of Bitumen from Bituminous Paving Mixtures
ACES Site Lab - Mesaimeer
1. Nishadh Deepal 2. Mostafa Mohamed 3. Aneesh Babu
700. 6.25 Asphalt ASTM D2726/D2726M
Bulk Specific Gravity and Density
ACES Site Lab - Mesaimeer
1. Nishadh Deepal 2. Mostafa Mohamed 3. Aneesh Babu
701. 6.3 Asphalt ASTM D2995 Application Rate of Bituminous Distributors
ACES Site Lab - Mesaimeer
1. Nishadh Deepal 2. Mostafa Mohamed 3. Mohamed Riswan 4. Aneesh Babu
702. - Asphalt ASTM D3203/D3203M
Percent Air Voids in Compacted Dense and Open Bituminous Paving Mixtures
ACES Site Lab - Mesaimeer
1. Nishadh Deepal 2. Mostafa Mohamed 3. Aneesh Babu
703. 6.29 Asphalt ASTM D3549/D3549M
Thickness of Asphalt Specimen
ACES Site Lab - Mesaimeer
1. Nishadh Deepal 2. Mostafa Mohamed 3. Aneesh Babu
704. 6.23 Asphalt ASTM D5361/D5361M
Sampling Compacted Bituminous Mixtures for Laboratory Testing
ACES Site Lab - Mesaimeer
1. Mohamed Riswan 2. Nishadh Deepal 3. Mostafa Mohamed 4. Aneesh Babu
TL-343 Page 110 of 112 Arab Center for Engineering Studies ACES-Doha
PWA No. Category Standard/ Method
No. /Date Standard/Method Title &
Section Location /
Facility Authorized Technicians
705. 6.34 Asphalt ASTM D5444 Mechanical Size Analysis of Extracted Aggregate
ACES Site Lab - Mesaimeer
1. Nishadh Deepal 2. Mostafa Mohamed 3. Aneesh Babu
706. 6.24 Asphalt ASTM D6926 Preparation of Bituminous Specimens Using Marshall Apparatus
ACES Site Lab - Mesaimeer
1. Nishadh Deepal 2. Mostafa Mohamed 3. Aneesh Babu
707. 6.30 Asphalt ASTM D6927 Marshall Stability and Flow of Bituminous Mixtures
ACES Site Lab - Mesaimeer
1. Nishadh Deepal 2. Mostafa Mohamed 3. Aneesh Babu
708. 6.47 Asphalt BS EN 12697-27 Test Methods for Hot Mix Asphalt-Sampling
ACES Site Lab - Mesaimeer
1. Mohamed Riswan 2. Nishadh Deepal 3. Mostafa Mohamed 4. Aneesh Babu
709. 3.21 Concrete BS EN 12350-1 Sampling of Fresh Concrete ACES Site Lab - Mesaimeer
1. Abdul Muhmin 2. Mohamed Naseer 3. Obidiako Franklin 4. Nishadh Deepal 5. Eduardo Dela Cruz 6. Aneesh Babu
710. 3.23 Concrete BS EN 12350-2 Slump Test of Fresh Concrete ACES Site Lab - Mesaimeer
1. Abdul Muhmin 2. Mohamed Naseer 3. Obidiako Franklin 4. Nishadh Deepal 5. Eduardo Dela Cruz 6. Aneesh Babu
711. 3.25 Concrete BS EN 12390-1 Shape, dimensions and other requirements for specimens and moulds
ACES Site Lab - Mesaimeer
1. Abdul Muhmin 2. Obidiako Franklin 3. Nishadh Deepal 4. Eduardo Dela Cruz 5. Aneesh Babu
712. 3.22 Concrete BS EN 12390-2 Making and Curing of Concrete
ACES Site Lab - Mesaimeer
1. Abdul Muhmin 2. Mohamed Naseer 3. Obidiako Franklin 4. Nishadh Deepal 5. Eduardo Dela Cruz 6. Aneesh Babu
TL-343 Page 111 of 112 Arab Center for Engineering Studies ACES-Doha
PWA No. Category Standard/ Method
No. /Date Standard/Method Title &
Section Location /
Facility Authorized Technicians
713. 3.26 Concrete BS EN 12390-3 Annex B
Compressive Strength of Test Specimens- Hardened Concrete
ACES Site Lab - Mesaimeer
1. Abdul Muhmin 2. Obidiako Franklin 3. Nishadh Deepal 4. Eduardo Dela Cruz 5. Aneesh Babu
714. 3.27 Concrete BS EN 12390-7 Density of Hardened Concrete
ACES Site Lab - Mesaimeer
1. Abdul Muhmin2. Obidiako Franklin3. Nishadh Deepal4. Eduardo Dela Cruz5. Aneesh Babu
715. 3.28 Concrete BS EN 12504-1 Obtaining and Testing of Drilled Cores
ACES Site Lab - Mesaimeer
1. Mostafa Mohamed 2. Nishadh Deepal 3. Aneesh Babu
716. 1.4 Soil ASTM D1140 Determining the Amount of Material Finer than 75-μm (No. 200) Sieve in Soils by Washing
ACES Site Lab - Mesaimeer
1. Obidiako Franklin 2. Nishadh Deepal 3. Uzor Ikechukwu 4. Aneesh Babu
717. 1.8 Soil ASTM D1556/D1556M
Standard Test Method for Density and Unit Weight of Soil in Place by Sand-Cone Method
ACES Site Lab - Mesaimeer
1. Obidiako Franklin 2. Nishadh Deepal 3. Uzor Ikechukwu 4. Aneesh Babu
718. 1.6 Soil ASTM D1557 Standard Test Methods for Laboratory Compaction Characteristics of Soil Using Modified Effort (56,000 ft-lbf/ft3 (2,700 kN-m/m3))
ACES Site Lab - Mesaimeer
1. Obidiako Franklin 2. Nishadh Deepal 3. Uzor Ikechukwu 4. Aneesh Babu
719. 1.11 Soil ASTM D1883 CBR (California Bearing Ratio) of Laboratory- Compacted Soils (Soaked)
ACES Site Lab - Mesaimeer
1. Obidiako Franklin 2. Nishadh Deepal 3. Uzor Ikechukwu 4. Aneesh Babu
720. 1.2 Soil ASTM D2216 Standard Test Methods for Laboratory Determination of Water (Moisture) Content of Soil and Rock by Mass
ACES Site Lab - Mesaimeer
1. Obidiako Franklin 2. Nishadh Deepal 3. Uzor Ikechukwu 4. Aneesh Babu
721. 1.5 Soil ASTM D4318 Liquid Limit, Plastic Limit and Plasticity Index of Soil
ACES Site Lab - Mesaimeer
1. Obidiako Franklin 2. Nishadh Deepal 3. Uzor Ikechukwu 4. Aneesh Babu
TL-343 Page 112 of 112 Arab Center for Engineering Studies ACES-Doha
PWA No. Category Standard/ Method
No. /Date Standard/Method Title &
Section Location /
Facility Authorized Technicians
722. 1.7 Soil ASTM D4718/D4718M
Standard Practice for Correction of Unit Weight and Water Content for Soils Containing Oversize Particles
ACES Site Lab - Mesaimeer
1. Obidiako Franklin 2. Nishadh Deepal 3. Uzor Ikechukwu 4. Aneesh Babu
723. 1.3 Soil ASTM D6913/D6913M
Particle Size Distribution ACES Site Lab - Mesaimeer
1. Obidiako Franklin 2. Nishadh Deepal 3. Uzor Ikechukwu 4. Aneesh Babu