arc 400 electrosurgical device …venussurgicals.com/pdf/bowa arc 400 en 0911.pdfdevice settings on...

8
ARC 400 ELECTROSURGICAL DEVICE PERFORMANCE AT yOUR FINGERTIPS BOWA-electronic GmbH & Co. KG Heinrich-Hertz-Strasse 4–10 72810 Gomaringen I Germany Phone +49 (0) 7072-6002-0 Fax +49 (0) 7072-6002-33 [email protected] I bowa.de 20153 08/11 Printed in Germany Subject to technical and constructive change Copyright by BOWA-electronic, Gomaringen Heart and soul for the OR The best is never good enough, for beyond it lie new discoveries and new solutions. It is our shared passion for a field in which we both excel, each in our own way. This same passion gives each of us the ability to achieve outstanding accomplishments. Discover the new generation of electrosurgery devices with the ARC 400. Discover true passion and the highest level of performance for the OR.

Upload: lynguyet

Post on 26-May-2018

220 views

Category:

Documents


0 download

TRANSCRIPT

ARC 400ELECTROSURGICAL DEVICEPERFORMANCE AT yOUR FINGERTIPS

BOWA-electronic GmbH & Co. KGHeinrich-Hertz-Strasse 4–1072810 Gomaringen I Germany

Phone +49 (0) 7072-6002-0Fax +49 (0) [email protected] I bowa.de

2015

3 0

8/11

Pr

inte

d in

Ger

man

y S

ubje

ct to

tech

nica

l and

con

stru

ctiv

e ch

ange

Co

pyrig

ht b

y BO

WA-

elec

tron

ic, G

omar

inge

n

Heart and soul for the OR

The best is never good enough, for beyond it lie new discoveries and new solutions. It is our shared passion for a field in which we both excel, each in our own way. This same passion gives each of us

the ability to achieve outstanding accomplishments.Discover the new generation of electrosurgery devices with the ARC 400. Discover true passion and the highest level of performance for the OR.

Personalised configuration Intuitive handling Efficient operation

Our passion. your performance.

Every field has specific requirements, every team works differently, every procedure is unique. This is why the ARC 400‘s interactive touchpad allows you to freely configure the user interface according to

Real performance is achieved by working intuitively. The interactive touchscreen fingertip operation and clear relationship between controller and instrument give you a full overview – in every situation.

Not only do ease of use and safe operation save valuable OR time, so do the special LIGATION function and the ability to connect up to five instru-ments to the ARC 400 simultaneously.

your requirements. Select the pre-configured indication-oriented standard values or create your own individual preferred settings for your field and work style.

With the new Plug’n Cut and Plug’n Cut COMFORT functions, the correct basic settings are automatical-ly selected for whichever BOWA COMFORT instru-ments are connected.

Rapid communication with other system compo-nents or software updates take place easily via USB and several standard connections, so that you can continue to work efficiently in the future.

Ideal application areas for the ARC 400 in HF surgery:

General, visceral, thoracic, pediatric surgery

Gynecology

Urology

ENT

Plastic and aesthetic surgery

Orthopedic and trauma surgery

Oral and maxillofacial surgery

Neurosurgery

Cardiac surgery

BOWA ARC 400 – the new generation of electrosurgical devices for monopolar and bipolar electrosurgery with sealing technology. It supports every surgical team thanks to its indication-related setup options for specific surgical fields.

Figu

re: S

cale

1:1

100% intuition

Clarity: Every connected socket – in this picture, the upper left and lower right socket – is clearly assigned to one quadrant of the display

Help: The introductory film can be played directly on the device

Touchpad technology allows increased intuition in the ORWith the ARC 400, you have fingertip control of all device functions via the interactive touchpad, using clearly designed symbols. Effects, favorites and individualized settings can be easily and clearly selected. Menu depth is generally limited to only two levels, because you want to be working, not search-ing. A reasoned user interfaceThe large, high-definition display is divided into four quadrants that correspond to the four sockets on the sides: If you attach an instrument to the upper right bipolar socket, for example, the upper right quadrant of the display is activated and you immedi-ately know where you need to make your settings.

What You See Is What You GetThe icons behave according to the WySIWyG (What you See Is What you Get) principle. These clear graphic symbols have a preview mode. If you adjust the desired effect to your individual requirements, the preview changes.

Always work with the correct socketThe touchpad provides outstanding operating comfort with its underlying functions and the display‘s innovative user logic. When adjustments are made to the display, the corresponding instrument socket flashes, offering just the right support in the darkened environment of the OR.

More than an interface: Videos on the displayTo brief and train new employees, simply use the touchpad display. Insert the USB drive with the introductory video, and a presenter begins demon-strating the functions of the ARC 400.

Smart – and hygienic – displayThe ARC 400 display is made of flat, wipe-resistant, shatter- and scratch-proof safety glass. Only the mechancial mains switch protrudes from the front panel. The advantage: The touchpad technology eliminates seams and uneven surfaces. This ensures rapid and hygienic cleaning in the OR.

Intuitive handling – Smart touchpad technology

Dr. Dongle – your perfect settings in every OR

Would you like to work with your own personal device settings on every ARC 400 unit, in every OR, in every clinic? It‘s easy with Dr. Dongle. you can

ARC 400 operation is intuitive and fast with the touchpad. Each instrument socket is related to the directly adjacent display quadrant.

If a parameter is set, the socket for the corresponding instrument begins to flash. This provides security and convenience.

have your individual device settings available in your pocket at all times. Simply store the perfect settings and use them with every ARC 400 unit.

Dr. Dongle was awarded:

Plug’n Cut: ARC 400 automatically recognizes when a standard instrument is con-nected

With a tap of the finger: Rapidly create and call up favorites Everything in the green? Neutral electrode monitoring, shown here in the setting for babies (50 watts max.), gives you continuous status information

Plug’n Cut COMFORT: The ARC 400 autopilot recognizes the specific instrument and selects the corresponding setup parameters

Everything at a glance: Display of the expected effects Efficient: The lower right bipolar connection socket can be extended to connect two standard plugs – this makes three bipolar connections available

Plug’n CutPlug’n Cut makes your work in the OR immediately more convenient. As soon as you connect an instrument to a standard socket, the assigned menu opens on the touchpad with the relevant input fields for this socket. This function is available at all four sockets and puts an end to searching down in menus. Immediately select your required values and functions and begin the procedure.

Choose your favoritesNothing can replace experience – especially in surgery. This is why, in addition to its many indica-tion-related pre-settings, the ARC 400 offers the possibility of optimizing standard values according to your own personal experience. Up to eight personal favorite settings can be stored and called up with a tap of your finger in the favorites menu.

If you want your favorites to travel with you every-where, we recommend our Dr. Dongle storage drive which can be easily inserted into any ARC 400 unit. Alternatively, up to 400 device settings can be loaded and stored.

Plug’n Cut COMFORTPlug’n Cut is convenient, Plug’n Cut COMFORT offers even more. Thanks to the latest RFID technology, the ARC 400 and BOWA COMFORT instruments communi-cate with one another. The latest generation of electro-surgical devices identifies the instrument that was just plugged in, and immediately selects the corresponding parameters. In this way, Plug’n Cut COMFORT offers not just the highest level of user convenience, but also maximum application security – illogical or inefficient setting options are avoided from the start. Dangerous or contradictory settings are not possible.

Directly to your specific applicationTo help the OR team operating without losing time, the ARC 400 offers a wide range of electrosurgical standard or indication-oriented power formats.

Select a power profile with a tap of your finger, and refine it if necessary using the effect settings.

Freedom of choiceEffects and foot switches can be freely assigned, no symbols are shown for unused sockets.

Intuitive handling – Plug’n Cut and Plug’n Cut COMFORT

Individualized settings – your experience is the best standard

Efficient work on a high-tech basisPassion is nothing without the right technologyExcellent results depend on the right technology. In addition to the innovative socket design that allows up to two monopolar and three bipolar plugs to be attached simultane-ously and is compatible with all standard connections, numerous hardware and software components can also directly impact performance in the OR.

- ARC CONTROL spark regulation, for reproducible monopolar and bipolar cutting results

- Up to nine effects per mode- Easy Neutral electrode monitoring with contact monitor,

baby mode with automatic power limitation- Current leakage monitoring - Short circuit detection- ISSys Permanent system self-testing (Integrated Safety

System)- Permanent initial cut support CCS (Cut Control System)- Configurable socket design- Information area for device messages- Operating instructions available directly on the device- CUT modes: e.g. standard, dry, cardiac, GastroCut snare

and knife, MetraLOOP, laparoscopy- Micro-regulations and power forms for plastic and neurosur-

gery down to 0.1 W- COAG modes: moderate, forced, spray, cardiac- AUTOSTART function

An innovative socket system for all connections and up to five instruments:monopolar:2 x 3-pin & Bovieor2 x 3-pin & Erbe

bipolar:2 x 2-pin & 2 x Erbe

Sparing resources – LIGATION with the ARC 400

New: The selection of LIGATION offers new potential, all settings are done automatically

Cost-effective: No instrument change thanks to NightKNIFE® Seal’n Cut

ARC 400: The specialist for vessel sealing With ARC 400 and BOWA LIGATION instruments such as TissueSeal®PLUS for open surgical applications and NightKNIFE® also for laparoscopic use, large-bore veins, arteries and tissue bundles of up to 7 mm diameter can be sealed securely and permanently, economically and without residue. Seal security up to a pressure of 700 mmHg has been proven in studies.

Optimal results based on outstanding ergonomics and tactility are a plus for the surgical artist. And the huge potential for saving OR time, suturing material and clips, as well as instrument reusability, convince the strictest cost controller.

Two hundred times instead of once BOWA LIGATION instruments can be reused up to two hundred times. As shown in the graph, even after just 50 uses there is an enormous cost advantage over disposable instruments.

Costs and benefits – Close the gap

Rely on an established technique for the permanent sealing of vessels and tissue: LIGATION. Besides the advantage of not introducing foreign bodies into the

patient, this method saves OR time, suturing material and clips. Autoclavable BOWA LIGATION instruments are the first choice for use with the ARC 400.

Literature:Schuld J, Laschke MW, Rupertus K, Richter S, Menger MD,Schilling MK: evaluation study: BOWA NightKNIFE® vs. Ligasure Atlas™. BOWA, Gomaringen 2008

Schuld J, Richter S, Laschke MW, Sperling J, Menger MD, Schill-ing MK, Surgical Association for OR and Instrument Technology of the German Association for General and Visceral Surgery: evaluation study: BOWA TissueSeal® vs. valleylab Ligasure™. BOWA, Gomaringen 2008

Schuld MD, Sperling MD, Kollmar MD, Menger MD, Schilling MD, Richter MD, Laschke MD: The NightKNIFE®: Evaluation of Efficiency and Quality of Bipolar Vessel SealingJOURNAL OF LAPAROENDOSCOPIC & ADVANCED SURGICAL TECHNIQUES 2011

Cost advantage of the Bowa NightKNIFE® compared to disposable instruments for 50 procedures

Disposable instruments BOWA NightKNIFE®

16.000 €

14.000 €

12.000 €

10.000 €

8.000 €

6.000 €

4.000 €

2.000 €

TissueSeal® PLUS- 190, 230 and 280 mm- autoclavable- Plug’n Cut COMFORT

TissueSeal®

- 190, 230 and 280 mm- base instrument autoclavable- variable disposable tips

NightKNIFE®

- 360 and 200 mm- 10 mm diameter- autoclavable- changeable knife- Plug’n Cut COMFORT

LIGATOR®

- 360 and 110 mm- 5 mm diameter- autoclavable- Maryland and straight model- Plug’n Cut COMFORT

Innovation: bipolar resection in urology with very high resection speed Special gynecology effect: extremely safe and rapid uterus removal with the MetraLOOP function

Support task distribution in cardiac surgery: selectable simultaneous activation GastroCut: highly flexible with loops or knife electrodes

Bipolar resection for urologyBipolar resection with the ARC 400 stands out for its extremely reliable initial cuts and a high resection speed.

Reduced irritation of the obturator nerve and bipolar technology hugely increase operating safety in this field. Using saline solution as a medium prevents the danger of TUR syndrome.

In addition, monopolar transurethral resection of the prostate (TUR-P), surgical treatment of bladder tumors (TUR-BT) and vaporization of prostate tissue (TUR-VAP) can also be carried out with the ARC 400.

Triple specialty: Functions for cardiac surgeryFor use in the field of cardiac surgery, three highly specialized functions for effective work are available:

SimCOAG for simultaneous coagulation and preparation with two monopolar handles.

Cardiac mammary for forced coagulation near the mammaries

Cardiac Thorax for forced coagulation when opening the thorax

Dry cutting for strong hemostasis

For gynecology: faster removalIn addition to the modes for vessel sealing and monopolar and bipolar resection, a special function is available in gynecology for laparo-scopic supracervical removal of the uterus (LSH).

This mode offers more rapid cutting of the loop for uterus removal. Work can be accomplished safely, rapidly and precisely, even with large loops.

GastroCut for gastroenterologyWith the ARC 400 GastroCut modes, the gastroenter-ologist achieves the best results for polypectomy and papillotomy and endoscopic resections with loops or knife electrodes.The gastroenterologist can adjust the haemostasis level of cutting and coagulation power to three speeds, slow, medium and fast, as required. The cut is optimized, the surgeon controls the cut‘s coagulation effect through the effect in nine steps. This allows cautious work to avoid complications, as well as rapid intervention when the situation allows it.

Special applications –Four examples

GastroCut power type

Cut Break Coagulation phase

200 Vp

Time

Voltage

Optimal: overview and operation Flexible: freely assignable pedals Space-saving: slim design

ARC CART – More mobility

Accessories made by BOWA – Simply safe

One unit – Many options In the OR, ARC 400 and the ARC CART form a high-performance unit that can be quickly placed just where it needs to be.

In the ARC CART, everything is in the right place and can be individually configured. The basic ARC CART configuration offers four steerable rollers with brakes, cable box, power cable detachment preven-tion device, handle, foot switch holder and a cable holder. The storage shelf of the cart is optimized for the ARC generator.

Also available are shelves for e.g. SHE SHA smoke evacuation system, drawers, gas bottle holders, equipotential bonding connectors or baskets. Mobility is thus greatly increased.

The foot switches are waterproof (IPX8) and explo-sion-protected. Pedals are ergonomically arranged to allow for fatigue-free operation over long periods.

„Simply safe“ is more than just a promise. For us it is the commitment to always think past the current standards. This approach leads us to solutions that open up new perspectives and support you optimally in your work. As a specialized HF surgery company, we offer you complete systems as well as complementary individual products. For a comprehensive overview of our range, visit us at www.bowa.de.

Monopolar accessories

Open applicationElectrode handlesConnecting cablesElectrodesElectrode containersElectrode extensionsAccessoriesArthroscopy electrodesForcepsMinimally invasive applicationErgoLAPElectrodes for laparoscopyMetraLOOP Adapters

Argon accessories

Open applicationFlexible application

Neutralelektroden

Electrodes for single useReusable rubber return plates

ARC accessories

Accessory setARC OptionPower cable and equipotential bonding linesTesting deviceFoot switchCommunication interfacePressure reducerTrolley ARC CARTSHE SHA Smoke evacuation system

Bipolaraccessories

Open applicationForceps Connecting cablesBipolar scissorsMinimally invasive applicationErgoLAP® BIPOLARAdapters

Vessel sealing

NightKNIFE®

LIGATOR®

TissueSeal® PLUSTissueSeal®

Accessories – More than the sum of the parts Update service – Simple with USB

BOWA ARC 400 is designed for use in nearly every field of electrosurgery. The ARC generators can be located on ceiling supply units or, for unlimited mobility, on the ARC CART. The device includes two monopolar and two three bipolar outputs. Simple

maintenance can be performed by hospital techni-cians, e.g. reading the device information or running software updates that we supply on a USB drive. If you want to connect third-party devices, this is possi-ble using special socket variants.

Made in Germany – ARC 400 technical information

ARC 400 is the new generation of electrosurgical devices. It offers the highest performance for all standard instrument families. Together with BOWA

Take advantage of the latest developments of the future. ARC 400 is ready. With our update service, you can update the ARC 400 software very simply

accessories, ARC 400 forms a system with outstand-ing features, medical as well as economical.

with a USB drive. The many standard connections guarantee future-proofing and an automated connection to your system environment – even in tomorrow’s world.

Clear design vocabulary: compact design, ideally suited to the hygienic require-ments of the OR

Communicative interfaces: with USB and network connections, fit for today and tomorrow

Overview of technical dataMaximum cutting power 400 watts

Maximum coag power 350 watts

Frequency 330 kHz / 1 MHz

Mains voltage 100 V – 120 V / 220 – 240 V ± 10 %

Mains frequency 50 / 60 Hz

Mains power max. 8 A / 4 A

Mains fuse T 8 A / T 4 A

Power consumption in standby mode 40 watts / 85 VA

Power consumption at max. 550 watts / 975 VA

Equipotential bonding connector yes

Width x Height x Depth 430 x 180 x 475 mm

Weight 12,5 kg

Classification under EC guidelines 93/42/EWG II b

Protection class according to EN 60 601-1 I

Type according to EN 60 601-1 CF

CE marking CE0123

Safety system EASy with NE contact monitor

Program locations 400

Monopolar sockets 2 x international (configurable)

Bipolar sockets 2 x international, 2 x Erbe

Simultaneous activation 2 monopolar sockets

GastroCut 6 cut types with 9 effects

Micro-adjustments Included

AUTOSTART yes

Instrument recognition Plug’n Cut & Plug’n Cut COMFORT

Free foot switch assignment and socket switching yes

Item number ARC 400 900-400

Option Bipolar resection 900-395

Option LIGATION 900-396