arc guard® power center - becker mining
TRANSCRIPT
performance | reliability | know-how
PO Box 940 • Barboursville, WV 25504 • 304-733-7204www.becker-global.com
Becker Global-America’s patented Arc Guard® Power Center provides an added degree of protection above the standard MSHA requirements. In addition to bolted faults, the Arc Guard™ is designed and performance tested to ANSI/IEEE C37.20.7 to provide protection from the hazards of internal arcing faults.
►Protects from injury or death ►Minimizes damage to assets ►Maximizes production ►Performance tested and classified as arc resistant
ADDITIONAL FEATURES INCLUDE: • Unit Type Tested at KEMA Power Labs • Passed Stringent ANSI C37 Standards • Isolated Low Voltage Compartment • Isolated Transformer • Isolated Primary Disconnect
Patent #8,648,274
STANDARD FEATURES INCLUDE:
Class 2B Rating
Arc resistant to protect workers at the front, back and sides of the equipment
Performance tested and classified as arc resis-tant in accordance with ANSI/IEE C37.20.7-2007
Reinforced enclosure to withstand pressure from internal arcing faults
Internal venting system with pressure dams and pressure vents to channel the flow of arc fault gases and vent these gases out of the top of the gear and away from personnel
Reinforced and sealed top covers and panels
Reinforced bolted covers
Ventilation inlet/outlet shrouds
Does not depend on electric
Above & Beyond Arc Guard® Power Center goes the extra mile in safety.
performance | reliability | know-how
14660 Industrial Park Road • Bristol VA 24201 • 276-285-3841www.becker-global.com
Becker Global-America’s Arc Guard® Substations provide protection where it’s needed most. Protecting employees and equipment with above standard MSHA requirements and performance tested to ANSI/IEEE C37.20.7, these substations eliminate the hazards of internal arcing faults, which can be devastating.
ARC GUARD SUBSTATIONS FEATURES:
> Arc resistant to protect workers/equipment
> Detects faults in low- and medium-voltage switchgear and disconnects the power provided to the arc within 30 to 50 milliseconds
> The Arc Guard™ system can detect an arc flash in less than one millisecond
> Performance tested and classified as arc resistant in accordance with ANSI/IEE C37.20.7-2007
> Integrated assembly using reliable and cost-effective load interupter switches.
Protection for your people.Arc Guard® Substations eliminate arc hazards.
Patent #8,648,274