arcgis 9p0 installation instructions

8/14/2019 ArcGIS 9p0 Installation Instructions

1/25


2/25

Installing ArcGIS 9 2 NACS Response Center

1) To remove ArcGIS 8.x (a.k.a., ArcGIS Desktop) go to:

Start > Control Panel > Add or Remove Programs

then click to highlight ArcGIS Desktop, and click the Removebutton.

A message will appear that states "Are you sure you want to remove ArcGISDesktop from your computer?" Click Yes.

Over a period of many minutes ArcGIS 8.x (Desktop) will be removed from yourcomputer.

2) Do the same removal procedure for ArcGIS Tutorial Data and ArcGIS ArcObjectsDeveloper Kit if these components are currently installed on your computer.

3) Once ArcGIS 8.x and its associated tutorial data are removed from your computer,insert the floppy disk into your computers floppy disk reader and copy the ArcGISlicense file (it has a name beginning with UNK) to the c:\arcgis folder on yourcomputer. You might have to create this folder if t does not currently exist.

Once the file is copied, remove the floppy disk from your computer and return the floppyto the ArcGIS CD packet.

4) Insert the CD titled ArcGIS 9 / ArcEditor / 9.0 for Windows / Single Use. You will

be presented with the following ArcGIS 9 installation splash page.


3/25


5) Choose Install ArcGIS Desktop. After a few seconds you will be presented withthe following ArcEditor Setup welcome page. (If you do not see this, page refer toError Installing ArcGIS 9, below.)


4/25


6) Click Next >. The ArcGIS Desktop Setup window appears.

7) Read the ArcGIS License Agreement and then, if you accept the conditions of thesoftware license, click I accept the license agreement, then click the Nextbutton. Inthe next window that appears you must choose the installation type.


5/25


8) Click Completethen click the Next >button.

NACS recommends Complete rather than Typical or Custom because Complete willprovide you access to all of the ArcGIS extensions (such as Spatial Analyst, 3D Analyst,Tracking Analyst, etc.) that are included in our software license.

In the next window you must choose the folder where ArcGIS will be installed.

9) Accept the default folder destination where ArcGIS software will be installed(C:\Program Files\ArcGIS\) then click the Next >button.

The Python Destination Folder window will then appear. As is indicated in thatwindow, Python software is required to support certain core ArcGIS 9 geoprocessingtools.


6/25


10) Accept the default folder destination where Python software will be installed(C:\Python21\ without spaces in the name) then click the Next >button. A windowconfirming your folder destinations is displayed.

11) Click the Next >button.


7/25


For the next 5 or more minutes ArcGIS will be installed. Once the software is installedyou will see the following window.

12) Click the Finishbutton. The following window is displayed.


8/25


13) Uncheck the checkbox titled Crystal Reports Version 9.0 for ESRI.

If you want to have the ArcGIS Tutorial Data and the Desktop Developer Kit installedthen leave these two checkboxes checked. We recommend that you do check thesetwo options.

14) Click OK. The Tutorial Data Setup window is displayed.


You will be presented with the License Agreement window for Tutorial Data, similar toStep 6, above.


9/25


16) If you accept the conditions of the license, click I accept the license agreement,then click the Nextbutton.

The Select Installation Type window is displayed.


10/25



The Tutorial Data Destination Folder window appears.

18) Accept the default destination folder (C:\arcgis\) then click the Next >button.

A window confirming your folder destinations is displayed.


11/25



For the next few minutes ArcGIS Tutorial Data will be installed. Once the data files areinstalled you will see the following window.


12/25


13/25



You will be presented with the License Agreement window for Desktop DeveloperKit, similar to Step 6, above.


The Select Installation Type window is displayed.


14/25



The Desktop Developer Kit destination folder window appears.


15/25


25) Accept the default destination folder (C:\Program Files\ArcGIS\) then click theNext >button.

The Desktop Developer Kit software and components will proceed to be installed. Oncedone the following window is displayed.

26) Click the Finishbutton.

The ArcGIS/ ArcEditor Registration Wizard window appears.


16/25


27) Click I have received an authorization file from ESRI and am now ready tofinish the registration process, then click the Next > button.

The Authorization File window appears.


17/25


28) Click I received the authorization file by email and have saved it to disk.

Click the Browse button then browse your hard disk and select the registration filethat you installed in Step 3. The file has a name beginning with UNK. If you did notinstall the file on your computer, insert the floppy disk that comes with the ArcGIS CDpacket and then browse to and select that file. (Later, be sure to remove the floppy diskand return it to the ArcGIS CD packet.)

Once the file name is displayed in the Browse panel, click the Next > button.

The following Authorization Complete window will appear.


18/25


If, back in Step 7, you selected Complete during the ArcGIS setup then your list ofproducts will include the following:

ArcEditor 3D Analyst ArcPress ArcScan Geostatistical Analyst Maplex Publisher Spatial Analyst StreetMap Survey Analyst

Tracking Analyst

29) Click the Finishbutton.

ArcGIS 9 is now installed and you can begin using the software.


19/25


If you previously had ArcGIS 8.x installed on your computer then the ArcMap andArcCatalog icons on your desktop will no longer point to the software. You can redirectthese icons to their respective software executables:

30) Double-click on the ArcMap icon on your desktop then click the Browse button.

Navigate to the following folder:

C:\Program Files\ArcGIS\Bin\

Click on the ArcMap.exe file name, then click the Open button.

Repeat the procedure for the ArcCatalog icon (if you have one on your desktop) bynavigating to the same folder and selecting ArcCatalog.exe.

Installing ESRI Software Documentation Library

The ESRI Software Documentation Library CD contains numberous PDF files that canbe used to help guide you through all aspects of the software. You can open the CDwith Windows Explorer and select individual PDF files to open or copy to your harddrive. Or you can install all the PDF files on your computer. A complete installation ofthe ESRI Software Documentation Library requires ___ Mb of disk space.

31) If you wish to install the entire Software Documentation Library insert the CD titledArcGIS 9 | ESRI Software Documentation Library in the CD reader. The followingwindow will be displayed:


20/25





21/25


The Software Documentation Library Setup destination folder window appears.

34) Accept the default destination folder (C:\ESRI_Library\) then click the Next >button.

A window confirming your folder destination is displayed.


22/25


35) Click the Next >button. The following window will be displayed indicating theLibrary files are installed.


23/25


Installing ESRI Data & Maps

There are four CDs of GIS data included in the ArcGIS CD packet. Data files on theCDs include basemap data for the United States, Canada, Mexico, Europe and theWorld; census, street, and elevation data for the United States; and image data for theWorld.

Basemap data files are stored in compressed .sdc format. These files can be copied

to your hard drive by exporting the data using ArcCatalog.

Return the ArcGIS CD Packet

Be sure to remove the last ArcGIS CD from your CD reader and return it to the ArcGISCD packet.

Before returning the ArcGIS CD packet to NACS, verify that the packet contains thesoftware license file floppy disk and the following 7 CDs:

ArcGIS 9 | ArcEditor | 9.0 for Windows | Single Use ArcGIS 9 | ArcGIS Desktop Developer Kit | 9.0 for Windows ArcGIS 9 | ESRI Software Documentation Library ArcGIS 9 | ESRI Data & Maps and StreetMap USA (DVD) ArcGIS 9 | ESRI Data & Maps | Image Data (DVD) ArcGIS 9 | ESRI Data & Maps | United States (CD) ArcGIS 9 | ESRI Data & Maps | World, Europe, Canada and Mexico (CD)


24/25


Error Installing ArcGIS 9

During the ArcGIS 9 installation procedure, you might see the following window followedby the next window, below, at which point you will not be able to install ArcGIS 9.

If this occurs then you have not completely removed ArcGIS 8.x software from yourcomputer.

Return to Step 1 on Page 1 of this guide and follow the instructions on how to removeArcGIS Desktop, ArcGIS Tutorial Data, and ArcGIS ArcObjects Developer Kit.Then proceed to install ArcGIS 9. If the ArcGIS 9 CD is currently in the CD reader onyour computer you can start the installation process by going to:

Start > Run

The Runwindow opens as follows.


25/25

I t lli A GIS 9 25 NACS R C t

In the Open:panel type D:\setup.exe (where D is the letter indicating your CD drive)then click OK.

If you are still not able to install ArcGIS 9, call the NACS Response Center at x4-2222to ask for installation assistance.

arcgis 9p0 installation instructions

Documents