architect series traditional awning window · 2020. 8. 20. · architect series® traditional...

AW-1Pella 2020 Architectural Design Manual | Division 08 – Openings | Windows and Doors | www.Pella.com

Architect Series® Traditional Awning Window

Product Selection Guide

Sound Transmission Class/Outdoor-Indoor Transmission Class .......................................................................AW-2

Size and Performance Data ....................................................................................................................................AW-2

Features and Options ..............................................................................................................................................AW-3

Combination Assemblies .............................................................................................................................. AW-4

Glazing Performance ..................................................................................................................................... AW-5

Products with Impact-Resistant Glass .......................................................................................................AW-10

Grille Types

Grille Profiles .......................................................................................................................................................... AW-11

Typical Grille Patterns ........................................................................................................................................... AW-12

Size Tables

Awning .................................................................................................................................................................... AW-13

Large Awning ......................................................................................................................................................... AW-14

Design Data

Awning .................................................................................................................................................................... AW-15

Large Awning ......................................................................................................................................................... AW-16

Detailed Product Descriptions

Clad ......................................................................................................................................................................... AW-17

Wood ...................................................................................................................................................................... AW-18

Unit Sections

Wood Collection ................................................................................................................................................... AW-19

Clad ......................................................................................................................................................................... AW-20

Wood ...................................................................................................................................................................... AW-21

Large Awning—Clad .............................................................................................................................................. AW-22

Large Awning—Wood ........................................................................................................................................... AW-23

The information published in this document is believed to be accurate at the time of publication. However, because we are constantly working to improve our products, specifications are subject to change without notice. Consult your local Pella representative for up-to-date product information.



(—) = Not Available

(1) Maximum performance for single unit when glazed with the appropriate glass thickness. See Design Data pages in this section for specific product performance class and grade values. Values shown are for standard and special sizes; Custom sizes may not have the same values. Contact your local sales representative for complete information.

(2) The higher the level, the greater the product’s ability to resist forced entry.

(3) ASTM E 1425 defines standard sizes for acoustical testing. Ratings achieved at that size are representative of all sizes of the same configuration.

(4) Glazing configurations may result in higher operational forces.

NOTE: Performance with additional options may not be the same as Standard and Special size units. Please contact your local Pella representative for complete information.

Awning Clad Wood

SizesStandard vent / fixed sizes l l

Special sizes available l l

Performance 1

Meets or Exceeds AAMA / WDMA Ratings CW40 – CW50

Hallmark Certified

CW40 – CW50Hallmark Certified

Air Infiltration (cfm / ft 2 of frame @ 1.57 psf wind pressure) 0.05 0.05

Water Resistance 7.5 psf 7.5 psf

Design Pressure 40-50 psf 40-50 psf

Products with Impact-Resistant GlassLC+60/-60 – LC+75/-85

Hallmark Certified—

Other Performance Criteria

Forced Entry Resistance Level (Minimum Security Grade) 2 10 10

Large AwningSizesStandard Vent Sizes l l

Special Sizes Available l l

Performance 1

Meets or Exceeds AAMA / WDMA Ratings LC40

Hallmark Certified

LC40Hallmark Certified

Air Infiltration (cfm / ft 2 of frame @ 1.57 psf wind pressure) 0.05 0.05

Water Resistance 7.5 psf 7.5 psf

Design Pressure 40 psf 40 psf

Products with Impact-Resistant GlassLC+60/-60 – LC+75/-85

Hallmark Certified—

Other Performance CriteriaForced Entry Resistance Level (Minimum Security Grade) 2 10 10

Operating Force (lb) Initiate Motion / Maintain Motion (of Hallmark tested size and glazing) 4 15 / 6 15 / 6

Size and Performance Data

Sound Transmission Class / Outdoor-Indoor Transmission Class

Product Frame Size Tested 3

Glazing SystemSTC

RatingOITC

RatingOverall Glazing

Thickness

Exterior Glass

Thickness

Interior Glass

Thickness

Third Pane Thickness

Architect Series Clad Window

Vent with Integral Grilles53" x 29" 11/16" 2.5mm 2.5mm — 27 2459" x 23" 11/16" 5mm 3mm — 33 29

Vent with Removable or No Grilles53" x 29" 11/16" 2.5mm 2.5mm — 27 2359" x 23" 11/16" 5mm 3mm — 32 2759" x 23" 11/16" 3mm 6.0mm PVB — 33 28

Fixed with Integral Grilles47" x 59" 11/16" 3mm 3mm — 30 27

Fixed with Removable or No Grilles47" x 59" 11/16" 3mm 3mm — 29 2447" x 59" 11/16" 5mm 3mm — 31 2747" x 59" 11/16" 3mm 6.0mm PVB — 32 28

Architect Series Clad Window with

Impact-Resistant Glass

Vent with Removable or No Grilles59" x 23" 11/16" 3mm 7.6mm PVB — 35 3053" x 29" 1" 5mm 10.1mm SGP — 35 30

Fixed with Removable or No Grilles47" x 59" 11/16" 3mm 7.6mm PVB — 33 2953" x 53" 1" 5mm 10.1mm SGP — 35 30

rev. 8/20/20



(1) Contact your local Pella sales representative for current designs and color options. (2) Only available with Triple-Pane glazing, not available with high altitude glazing. (3) Available with Low-E argon-insulated glass only.

(4) Not available on Mahogany and Douglas Fir interiors. (5) Unit height determines availability.

Standard Options / Upgrades

Glazing

Glazing Type

Dual-Pane Insulating Glass Triple-Pane Insulating Glass

Insulated Glass Options/Low-E Types

Advanced Low-E

SunDefense™ Low-E

AdvancedComfort Low-E

NaturalSun Low-E

Clear (no Low-E coating)

Additional Glass Options

Annealed Glass

Tempered Glass

Obscure Glass 1Low-E Tinted Glass (Bronze, Gray and Green)

Non-Impact Laminated Dual-Pane Insulating Glass

Impact-Resistant Glass (Laminated Dual-Pane Insulating Glass)

Gas Fi l l/High Alt i tude

Argon

Krypton 2High altitude

High Altitude with Argon 3Wood types

Pine Mahogany, Douglas Fir

Exterior

EnduraClad– protective finish

EnduraClad Plus protective finish

Factory Primed Pine wood exterior

Unfinished Mahogany wood exterior

Cladding Colors 127 Standard colors Custom Colors

Interior

Unfinished Wood Factory primed 4 , Factory prefinished paint 4, Factory prefinished stain

Hardware

Hardware Finish

Champagne, White, Brown or Matte BlackBright Brass, Satin Nickel, Oil-Rubbed Bronze, Antique Brass, Distressed Bronze, Distressed Nickel

Sash Locks

SureLock® System, Unison Lock System 5 —

Hinging

Awning—Stainless Steel —

Large Awning—Wash Hinge —

Impact-Resistant—Wash Hinge —

Grilles

Integral Light Technology® Gri l les

— Traditional, Prairie, Top Row, Cross, New England, Victorian, Simulated French, Custom

Roomside Removable Gri l les

— Traditional, Prairie, Top Row, Cross, New England, Victorian, Custom

Gril les-Between-the-Glass

— Traditional, Prairie, Top Row 1, Cross or Custom-Equally Divided

Screens

— InView™ screens, Vivid View® screens

Features and Options



Combinations are a great way to create visual interest in any project. A combination is an assembly formed by two or more separate windows or doors whose frames are mulled together by a combination or reinforcing mullion.

Pella window combinations are available in an endless variety of arrangements. Below are available factory-assembled combinations. Some units can be fixed or vent depending on availability. Go to www.PellaADM.com for typical combinations and requirements and limitations related to mulling various combinations.

Contact your local Pella sales representative for more information.

• Combination Recommendations Downloadable PDF.

Click to view Clad-Wood Combinations Sections

Combinations

http://media.pella.com/professional/adm/Clad-Wood/D_Combinations.pdf



(1) Glazing performance values are calculated for Pine using NFRC 100, NFRC 200 and NFRC 500. Thermal performance of other wood species may vary. ENERGY STAR® values are updated to 2016 (Version 6) criteria.

(2) The values shown are based on Canada's updated ENERGY STAR® 2020 initiative.

Based on unit size, some products will use 2.5 mm glass that will have equivalent or improved performance from what is shown.

See the Product Performance section for more detailed information or visit www.energystar.gov for Energy Star guidelines.

R-Value = 1/U-Factor SHGC = Solar Heat Gain Coefficient VLT % = Visible Light Transmission CR = Condensation Resistance ER = Canadian Energy Rating

Gla

zing

Th

ickn

ess

Type of Glazing NFRC Certified Product #

Glass (mm)

Gap Fill

Performance Values 1Shaded Areas Meet ENERGY STAR®

Performance Criteria in Zones Shown

Ext. Int.

U-F

acto

r

SHG

C

VLT

CR

U. S. Canada 2

Zone ER Zone

Vent Dual-Pane Glazing Awning and Large Awning - Aluminum-Clad Exterior N NC SC S CA11/16" Clear IG PEL-N-30-13234-00001 3 3 Air 0.45 0.53 0.56 44

with grilles-between-the-glass PEL-N-30-13431-00001 0.44 0.49 0.51 44

with integral grilles PEL-N-30-13438-00001 0.44 0.49 0.51 44

11/16" Advanced Low-E IG PEL-N-30-13229-00002 3 3 Argon 0.28 0.26 0.48 61 NC

with grilles-between-the-glass PEL-N-30-13423-00002 0.28 0.23 0.43 61 NC SC S

with integral grilles PEL-N-30-13426-00002 0.29 0.23 0.43 61 NC SC S

11/16" SunDefense™ Low-E IG PEL-N-30-13230-00002 3 3 Argon 0.28 0.19 0.44 61 NC SC S



11/16" AdvancedComfort Low-E IG PEL-N-30-13233-00001 3 3 Argon 0.25 0.25 0.47 47 N NC SC S

with grilles-between-the-glass PEL-N-30-13430-00001 0.25 0.23 0.42 47 N NC SC S

with integral grilles PEL-N-30-13437-00001 0.27 0.23 0.42 47 N NC SC S

11/16" NaturalSun Low-E IG PEL-N-30-13231-00002 3 3 Argon 0.29 0.47 0.54 61 N

with grilles-between-the-glass PEL-N-30-13425-00002 0.29 0.43 0.49 60 N

with integral grilles PEL-N-30-13428-00002 0.29 0.43 0.49 60 N

Tinted Glazing11/16" Bronze Advanced Low-E IG PEL-N-30-13271-00001 5 3 Argon 0.29 0.23 0.31 59 NC SC S



11/16" Gray Advanced Low-E IG PEL-N-30-13272-00001 5 3 Argon 0.29 0.21 0.26 59 NC SC S



11/16" Green Advanced Low-E IG PEL-N-30-13273-00001 5 3 Argon 0.29 0.26 0.42 59 NC



High Altitude Glazing11/16" Advanced Low-E IG PEL-N-30-13235-00001 3 3 Air 0.32 0.26 0.48 55

with grilles-between-the-glass PEL-N-30-13432-00001 0.32 0.24 0.43 55 S

with integral grilles PEL-N-30-13439-00001 0.32 0.24 0.43 55 S

11/16" SunDefense Low-E IG PEL-N-30-13236-00001 3 3 Air 0.31 0.20 0.44 56 S



11/16" AdvancedComfort Low-E IG PEL-N-30-13238-00001 3 3 Air 0.28 0.25 0.47 43 NC SC S



11/16" NaturalSun Low-E IG PEL-N-30-13237-00001 3 3 Air 0.32 0.47 0.54 55



Glazing Performance - Total Unit

Climate Zones

CA


Architect Series® Traditional Awning WindowG

lazi

ng

Thic

knes

s


Glass (mm)

Gap Fill



Ext. Mid Int.

U-F

acto

r

SHG

C

VLT

CR

U. S. Canada 2

Zone ER Zone

Vent Triple-Pane Glazing Awning and Large Awning - Aluminum-Clad Exterior N NC SC S CA1" Advanced Low-E IG PEL-N-30-13314-00001 3 3 3 Argon 0.22 0.23 0.42 71 N NC SC S



1" Advanced Low-E IG PEL-N-30-13320-00001 3 3 3 Krypton 0.19 0.23 0.42 75 N NC SC S 29 CA

with grilles-between-the-glass PEL-N-30-13598-00001 0.19 0.21 0.38 75 N NC SC S 28 CA

with integral grilles PEL-N-30-13607-00001 0.19 0.21 0.38 75 N NC SC S 28 CA

1" SunDefense™ Low-E IG PEL-N-30-13315-00001 3 3 3 Argon 0.22 0.17 0.39 72 N NC SC S



1" SunDefense™ Low-E IG PEL-N-30-13321-00001 3 3 3 Krypton 0.19 0.17 0.39 75 N NC SC S 26 CA



1" NaturalSun Low-E IG PEL-N-30-13313-00001 3 3 3 Argon 0.22 0.39 0.47 71 N NC 34 CA

with grilles-between-the-glass PEL-N-30-13591-00001 0.22 0.35 0.43 71 N NC

with integral grilles PEL-N-30-13600-00001 0.22 0.35 0.43 71 N NC

1" NaturalSun Low-E IG PEL-N-30-13319-00001 3 3 3 Krypton 0.19 0.39 0.47 75 N NC 39 CA

with grilles-between-the-glass PEL-N-30-13597-00001 0.19 0.35 0.43 75 N NC 35 CA

with integral grilles PEL-N-30-13606-00001 0.19 0.35 0.43 75 N NC 35 CA

High Altitude Glazing1" Advanced Low-E IG PEL-N-30-13317-00001 3 3 3 Air 0.25 0.23 0.42 67 N NC SC S



1" SunDefense Low-E IG PEL-N-30-13318-00001 3 3 3 Air 0.25 0.18 0.39 67 N NC SC S



1" NaturalSun Low-E IG PEL-N-30-13316-00001 3 3 3 Air 0.26 0.39 0.47 67 N NC









Climate Zones

CA



lazi

ng

Thic

knes

s


Glass (mm)

Gap Fill



Ext. Int.

U-F

acto

r

SHG

C

VLT

CR

U. S. Canada 2

Zone ER Zone

Vent Dual-Pane Glazing Awning and Large Awning - Wood Exterior N NC SC S CA11/16" Clear IG PEL-N-40-07620-00001 3 3 air 0.43 0.54 0.56 44


11/16" Advanced Low-E IG PEL-N-40-07615-00002 3 3 Argon 0.27 0.26 0.48 61 N NC with integral grilles PEL-N-40-07812-00002 0.27 0.24 0.43 61 N NC SC S

11/16" SunDefense™ Low-E IG PEL-N-40-07616-00002 3 3 Argon 0.26 0.19 0.44 61 N NC SC S with integral grilles PEL-N-40-07813-00002 0.27 0.18 0.4 61 N NC SC S

11/16" AdvancedComfort Low-E IG PEL-N-40-07619-00001 3 3 Argon 0.24 0.25 0.47 48 N NC SC S with integral grilles PEL-N-40-07823-00001 0.25 0.23 0.42 47 N NC SC S

11/16" NaturalSun Low-E IG PEL-N-40-07617-00002 3 3 Argon 0.28 0.47 0.54 61 N

with integral grilles PEL-N-40-07814-00002 0.28 0.43 0.49 61 N

TINTED GLAZING11/16" Bronze Advanced Low-E IG PEL-N-40-07657-00001 5 3 Argon 0.28 0.23 0.31 59 NC SC S


11/16" Gray Advanced Low-E IG PEL-N-40-07658-00001 5 3 Argon 0.28 0.21 0.27 59 NC SC S with integral grilles PEL-N-40-07900-00001 0.29 0.19 0.24 59 NC SC S

11/16" Green Advanced Low-E IG PEL-N-40-07659-00001 5 3 Argon 0.28 0.26 0.42 59 NC


HIGH ALTITUDE GLAZING11/16" Advanced Low-E IG PEL-N-40-07621-00001 3 3 Air 0.30 0.26 0.48 56 NC


11/16" SunDefense Low-E IG PEL-N-40-07622-00001 3 3 Air 0.30 0.20 0.44 56 NC SC S with integral grilles PEL-N-40-07826-00001 0.31 0.18 0.4 56 S

11/16" AdvancedComfort Low-E IG PEL-N-40-07624-00001 3 3 Air 0.27 0.25 0.47 43 N NC SC S with integral grilles PEL-N-40-07828-00001 0.28 0.23 0.42 43 NC SC S

11/16" NaturalSun Low-E IG PEL-N-40-07623-00001 3 3 Air 0.31 0.47 0.54 56








Climate Zones

CA



lazi

ng

Thic

knes

s


Glass (mm)

Gap Fill



Ext. Mid Int.

U-F

acto

r

SHG

C

VLT

CR

U. S. Canada 2

Zone ER Zone

Vent Triple-Pane Glazing Awning and Large Awning - Wood Exterior N NC SC S CA1" Advanced Low-E IG PEL-N-40-07700-00001 3 3 3 Argon 0.21 0.23 0.42 72 N NC SC S 27 CA



1" Advanced Low-E IG PEL-N-40-07706-00001 3 3 3 Krypton 0.17 0.23 0.42 76 N NC SC S 31 CA



1" SunDefense™ Low-E IG PEL-N-40-07701-00001 3 3 3 Argon 0.21 0.17 0.39 72 N NC SC S 24 CA



1" SunDefense™ Low-E IG PEL-N-40-07707-00001 3 3 3 Krypton 0.17 0.17 0.39 77 N NC SC S 27 CA



1" NaturalSun Low-E IG PEL-N-40-07699-00001 3 3 3 Argon 0.21 0.39 0.48 71 N NC 36 CA



1" NaturalSun Low-E IG PEL-N-40-07705-00001 3 3 3 Krypton 0.18 0.39 0.48 76 N NC 40 CA



High Altitude Glazing1" Advanced Low-E IG PEL-N-40-07703-00001 3 3 3 Air 0.24 0.24 0.42 67 N NC SC S



1" SunDefense Low-E IG PEL-N-40-07704-00001 3 3 3 Air 0.24 0.18 0.39 68 N NC SC S



1" NaturalSun Low-E IG PEL-N-40-07702-00001 3 3 3 Air 0.24 0.39 0.48 67 N NC









Climate Zones

CA







Gla

zing

Th

ickn

ess


Glass (mm)

Gap Fill



Ext. Int.

U-F

acto

r

SHG

C

VLT

CR

U. S. Canada 2

Zone ER Zone

Laminated Impact-Resistant Glass N NC SC S CA11/16" Clear PEL-N-30-13245-00001 3 8 Air 0.47 0.50 0.55 44



11/16" Advanced Low-E IG PEL-N-30-13240-00001 3 8 Argon 0.33 0.26 0.47 54



11/16" SunDefense™ Low-E IG PEL-N-30-13241-00001 3 8 Argon 0.33 0.20 0.43 55 S



1" Clear PEL-N-30-13377-00001 5 10 Air 0.43 0.48 0.53 45



1" Advanced Low-E IG PEL-N-30-13369-00001 5 10 Argon 0.28 0.25 0.45 59 NC SC S



1" SunDefense Low-E IG PEL-N-30-13370-00001 5 10 Argon 0.27 0.19 0.42 59 N NC SC S



Tinted Glazing Laminated Impact-Resistant11/16" Bronze Advanced Low-E IG PEL-N-30-13242-00001 3 8 Argon 0.33 0.22 0.1 54 S



1" Bronze IG PEL-N-30-13378-00001 5 10 Air 0.43 0.36 0.35 45



11/16" Gray Advanced Low-E IG PEL-N-30-13243-00001 3 8 Argon 0.33 0.22 0.06 54 S



1" Gray IG PEL-N-30-13379-00001 5 10 Air 0.43 0.34 0.3 45



11/16" Green Advanced Low-E IG PEL-N-30-13244-00001 3 8 Argon 0.33 0.24 0.26 54 S



1" Green IG PEL-N-30-13380-00001 5 10 Air 0.43 0.35 0.47 45




Climate Zones

CA



All sizes and glass types are tested for air/water/structural and impact-resistance, and are certified for wind zone 4, large missile rating D. Florida Product Approval System number not needed if Miami-Dade County approved.

ProductDesign Pressure Large Missile Rating D

Hallmark Certified

Florida Product Approval System

Minimum Maximum

Vent

75 +75 / -85 411-H-1339 FL10026

Large Fixed

+55 / -60 +60 / -75 411-H-1339 FL10022

Awning Impact-Resistant Downloadable PDF.

Click to view Clad-Wood Impact-Resistant Section

Products with Impact-Resistant Glass

http://media.pella.com/professional/adm/Clad-Wood/Pella-ImpactResistant_Awning.pdf



2" ILT1 1/4" ILT7/8" ILT

Clad Exterior - Wood InteriorOgee Glaze Grilles

7/8" 1 1/4"2"

2"1 1/4"7/8"

Removable Interior Pine Grilles

2"1 1/4"

2"

RMB2" Traditional

1 1/4"

RMB1 1/4" Traditional

3/4"

RMB2" Colonial

RMB1 1/4" Colonial

RMB3/4" Traditional

5/8" ILT 1 1/4" ILT7/8" ILT5/8" ILT 1 1/4" ILT7/8" ILT

Clad Exterior - Wood Interior Putty and Ogee Glaze Grilles

7/8"

5/8" 1 1/4"7/8"

5/8" 1 1/4"

Wood Exterior - Wood Interior Putty and Ogee Glaze Grilles

7/8"

5/8" 1 1/4"7/8"

5/8" 1 1/4"

®Integral Light Technology

3/4"3/4"

Grilles-Between-the-GlassContoured Aluminum -

GBG3/4" Contoured

GBG3/4" Contoured

Interior wood ILT grilles available in Pine, Mahogany or Douglas Fir to match complete unit.

Exterior wood ILT grilles available in Pine or Mahogany to match complete unit.

Grille Profiles



VG = Visible Glass Lite dimensions noted can vary. Custom configurations are also available, for details contact your local Pella sales representative.

For traditional patterns, see size tables.

Grilles-Between-the-Glass

Prairie Lite Patterns

9-Lite 12-Lite 14-Lite

Integral Light Technology® Grilles and Roomside Removable Grilles

Prairie Lite Patterns

9-Lite 12-Lite 14-Lite

Other Available Patterns

Cross New England Top Row Victorian

Other Available Patterns

Cross Top Row

Grille Patterns

Size range availability is for 3/4", 7/8" and 1-1/4" grille width. Standard corner lite dimension for Prairie patterns = 2-1/2" VG.

9-Lite

- Available in all standard and special sizes.

12-Lite

- Available in units ≥ 1'9" and ≤ 2'11" in width, and ≥ 1'9" in height.

14-Lite

- Available in units ≥ 1'9" in width and ≥ 2'11" in height .

Cross

- Standard visible glass to separator bar = one-quarter of total visible glass height.

New England

- Standard visible glass to separator bar = half of total visible glass height.

Top Row

- Standard visible glass to separator bar = 14" or half of total visible glass height, whichever is smaller.

Cross

- Available for units with frame heights ≥35". Standard visible glass to separator bar = 1/4 of total visible glass height.

Top Row

- Standard visible glass to separator bar = 14" for frame heights >35". Standard visible glass to separator bar = 21" for 35" frame heights and optional for 41" frame height. Separator bar at 12" or 16" optional for frame heights >41".



3273

3271

3265

3259

3253

3247

3241

3235

3229

3225

3223

3221

3217

3573 5973537347734173

5971

5965

5959

5953

5947

5941

5935

5929

5925

5923

5921

5917

5371

5365

5359

5353

5347

5341

5335

5329

5325

5323

5321

5317

4771

4765

4759

4753

4747

4741

4735

4729

4725

4723

4721

4717

4171

4165

4159

4153

4147

4141

4135

4129

4125

4123

4121

4117

3571

3565

3559

3553

3547

3541

3535

3529

3525

3523

3521

3517

2929

2525

2323

2121

1717

4"3 /

(813)(832)

2' 8"2' 8

Vent Units

OpeningFrame

(432

)(4

51)

1' 5

"1'

51'

91'

9"

(552

)(5

33)

(584

)(6

03)

1' 1

1"1'

11

(737

)(7

56)

2' 5

"2'

5

(635

)(6

54)

2' 1

"2'

14"

3/

4"3

/4"

3/

4"3

/4"

3/

2' 52' 5"

(756)(737)(432)

(451)

1' 5"1' 5

(533)(552)

1' 9"1' 9

(584)(603)

1' 11"1' 11

(635)(654)

2' 1"2' 14"3 / 4"3 / 4"3 / 4"3 / 4"3 /Opening

Frame

(432

)(4

51)

1' 5

"1'

51'

91'

9"

(552

)(5

33)

(584

)(6

03)

1' 1

1"1'

11

(737

)(7

56)

2' 5

"2'

5

(635

)(6

54)

2' 1

"2'

14"

3/

4"3

/4"

3/

4"3

/4"

3/

(1 8

54)

(1 8

73)

6' 1

"6'

14"

3/

4"3 /

4"3

/4"

3/

4"3

/4"

3/

Vent and Fixed Units

Fixed Units5'

5"

5' 1

1"

(1 8

22)

(1 8

03)

5' 1

1

(1 6

51)

(1 6

70)

5' 5

2' 1

1"4'

5"

3' 1

1"4'

11"

3' 5

"

(1 4

99)

(1 5

18)

4' 1

14"

3/

4' 5

(1 3

46)

(1 3

65)

(1 0

41)

(1 0

60)

4"3

/

(1 1

94)

(1 2

13)

3' 1

13'

52'

11

(889

)(9

08)

4"3

/

(1 213)(1 194)

3' 113' 11"

2' 112' 11"

(889)(908)

4"3 /3' 53' 5"

(1 041)(1 060)

4"3 / 4' 5 4"3 /

4' 5"

(1 346)(1 365)

(1 499)(1 518)

4' 114' 11"

4"3 /

F

F

F

F

F

Standard Awning Special Size Frame Dimensions*

Minimum Maximum

Vent1' 1-3/4" W x 1' 1-3/4" H

(13.75" x 13.75")

(350 x 350)

4'5" W x 2'5" H(53" x 29")

(1 346 x 737)

Fixed10" W x 10" H

(254 x 254)

12" W x 12" H(144" x 144")

(3 658 x 3 658)

* Available within size range shown. Contact your local Pella representative for availability of Triple-Glazing on larger custom unit sizes.

Keep frame di men sions to the near est 1/4" increment. Frame height cannot exceed frame width on special size vent units.

Not to scale.

F = Fixed Units only

Traditional grille patterns shown. Refer to Clad / Wood Overview Section for additional patterns and profiles.

Contact your local Pella representative for the availability of custom sizes smaller or larger than the parameters shown, Triple-Glazing or other custom fixed shapes.

Opening Dimensions

CLAD EXTERIOR UNITS: Dimensions shown in tables are rough opening dimensions.

WOOD EXTERIOR UNITS: Use frame dimension plus dimensions below. This dimension includes the use of standard 1-1/8" wood subsill.

Frame Rough Masonry

Brickmould Width Height Width Height

STD + 3/4" +1-7/8" + 3-1/8" + 3-1/8"

3-1/2" + 3/4" +1-7/8" + 6-3/8" + 4-3/4"

For clad and wood units with impact-resistant glass, see the product installation instructions or refer to local building code requirements.

Size Tables



Not to scale.

Traditional grille patterns shown. Refer to Clad / Wood Overview Section for additional patterns and profiles.

All units are available as fixed in the Casement section.

Contact your local Pella representative for the availability of custom sizes smaller or larger than the parameters shown, Triple-Glazing or other custom fixed shapes.

Large Awning Special Size Frame Dimensions*Minimum Maximum

Vent1'9" W x 1'5" H

(21" x 17")

(889 x 889)

6' 1" W x 6' 1" H

(73" x 73")

(1 854 x 1 854)

* Available within size range shown.

Keep frame di men sions to the near est 1/4" increment.

Opening DimensionsCLAD EXTERIOR UNITS: Dimensions shown in tables are rough opening dimensions.

WOOD EXTERIOR UNITS: Use frame dimension plus dimensions below. This dimension includes the use of standard 1-1/8" wood subsill.

Frame Rough Masonry

Brickmould Width Height Width Height

STD + 3/4" +1-7/8" + 3-1/8" + 3-1/8"

3-1/2" + 3/4" +1-7/8" + 6-3/8" + 4-3/4"

For clad and wood units with ® impact-resistant glass, see the product installation instructions or refer to local building code requirements.

Size Tables - Large Awning



Standard Awning Miscellaneous Formulas

Visible GlassWidth = Frame – 5-3/4"

Height = Frame – 5-3/4"

Actual GlassWidth = Frame – 4-3/8"


V = Vent Only

F = Fixed Units only

(—) = Not Applicable

(1) Maximum performance when glazed with the appropriate glass thickness. Second value, where shown, requires tempered glass.

Vent and Fixed

UnitVent Area Ft 2

Visible Glass

Ft 2

Standard Glass Thickness (mm)

Performance Class & Grade 1

Dual-Pane Glazing

Triple-Pane Glazing

Ann

eale

d

Tem

per

ed

Ann

eale

d

or

Tem

per

ed1717V 0.8 0.9 2.5 3 3 CW502121V 1.5 1.6 2.5 3 3 CW502323V 2.0 2.1 2.5 3 3 CW502525V 2.5 2.6 2.5 3 3 CW502929V 3.6 3.8 2.5 3 3 CW503217 1.8 2.1 2.5 3 3 CW503221 2.6 2.8 2.5 3 3 CW503223 3.0 3.1 2.5 3 3 CW503225 3.3 3.5 2.5 3 3 CW503229 4.1 4.2 2.5 3 3 CW503517 2.0 2.3 2.5 3 3 CW503521 2.9 3.1 2.5 3 3 CW503523 3.3 3.5 2.5 3 3 CW503525 3.7 3.9 2.5 3 3 CW503529 4.5 4.7 2.5 3 3 CW504117 2.4 2.8 2.5 3 3 CW504121 3.4 3.7 2.5 3 3 CW504123 3.9 4.2 2.5 3 3 CW504125 4.4 4.7 2.5 3 3 CW504129 5.4 5.7 2.5 3 3 CW504717 2.8 3.2 2.5 3 3 CW504721 4.0 4.4 2.5 3 3 CW504723 4.6 4.9 2.5 3 3 CW504725 5.2 5.5 2.5 3 3 CW504729 6.3 6.7 2.5 3 3 CW505317 3.3 3.7 2.5 3 3 CW505321 4.6 5.0 2.5 3 3 CW505323 5.3 5.7 2.5 3 3 CW505325 5.9 6.3 2.5 3 3 CW505329 7.3 7.6 2.5 3 3 CW50

5917F -- 4.2 2.5 3 3 CW505921F -- 5.6 2.5 3 3 CW505923F -- 6.4 2.5 3 3 CW45/CW505925F -- 7.1 2.5 3 3 CW45/CW505929F -- 8.6 2.5 3 3 CW45/CW50

Fixed Only

UnitVisible Glass

Ft 2

Standard Glass Thickness (mm)

Performance Class & Grade 1

Dual-Pane Glazing

Triple-Pane Glazing

Ann

eale

d

Tem

per

ed

Ann

eale

d

Tem

per

ed

3235 5.3 2.5 3 3 3 CW503241 6.4 2.5 3 3 3 CW503247 7.5 2.5 3 3 3 CW503253 8.6 2.5 3 3 3 CW503259 9.7 2.5 3 3 3 CW45/CW503265 10.8 3 3 3 3 CW503271 11.9 3 3 3 3 CW45/CW503273 12.3 3 3 3 3 CW45/CW503535 5.9 2.5 3 3 3 CW503541 7.2 2.5 3 3 3 CW503547 8.4 2.5 3 3 3 CW503553 9.6 2.5 3 3 3 CW45/CW503559 10.8 3 3 3 3 CW503565 12.0 3 3 3 3 CW503571 13.3 3 3 3 3 CW45/CW503573 13.7 3 3 3 3 CW45/CW504135 7.2 2.5 3 3 3 CW504141 8.6 2.5 3 3 3 CW504147 10.1 3 3 3 3 CW504153 11.6 3 3 3 3 CW504159 13.0 3 3 3 3 CW504165 14.5 3 3 3 3 CW504171 16.0 3 3 3 3 CW45/CW504173 16.5 3 3 3 3 CW45/CW504735 8.4 2.5 3 3 3 CW504741 10.1 3 3 3 3 CW504747 11.8 3 3 3 3 CW504753 13.5 3 3 3 3 CW504759 15.3 3 3 3 3 CW504765 17.0 3 3 3 3 CW45/CW504771 18.7 4 4 4 4 CW504773 19.3 4 4 4 4 CW505335 9.6 2.5 3 3 3 CW45/CW505341 11.6 3 3 3 3 CW505347 13.5 3 3 3 3 CW505353 15.5 3 4 3 4 CW45/CW505359 17.5 3 4 3 4 CW40/CW505365 19.4 4 4 4 4 CW505371 21.4 4 4 4 4 CW505373 22.1 4 4 4 4 CW505929 8.6 2.5 3 3 3 CW45/CW505935 10.8 3 3 3 3 CW505941 13.0 3 3 3 3 CW505947 15.3 3 3 3 3 CW505953 17.5 3 4 3 4 CW40/CW505959 19.7 4 4 4 4 CW505965 21.9 4 4 4 4 CW505971 24.1 4 4 4 4 CW45/CW505973 24.9 4 4 4 4 CW45/CW50

Design Data



Large Awning Miscellaneous Formulas

Visible GlassWidth = Frame – 5-3/4"


Actual GlassWidth = Frame – 4-3/8"


(1) Maximum performance when glazed with appropriate glass thickness.

Large Awning Vent and Fixed

UnitVent Area Ft 2

Visible Glass

Ft 2

Standard Glass Thickness (mm) Performance

Class & Grade 1Annealed Tempered

2121 1.2 1.6 2.5 3 LC402123 1.2 1.8 2.5 3 LC402125 1.3 2.0 2.5 3 LC402129 1.4 2.5 2.5 3 LC402135 1.6 3.1 2.5 3 LC402141 1.8 3.7 2.5 3 LC402147 2.0 4.4 2.5 3 LC402153 2.2 5.0 2.5 3 LC402159 2.3 5.6 2.5 3 LC402321 1.2 1.8 2.5 3 LC402323 1.3 2.1 2.5 3 LC402325 1.3 2.3 2.5 3 LC402329 1.5 2.8 2.5 3 LC402335 1.7 3.5 2.5 3 LC402341 1.8 4.2 2.5 3 LC402347 2.0 4.9 2.5 3 LC402353 2.2 5.7 2.5 3 LC402359 2.4 6.4 2.5 3 LC402521 1.3 2.0 2.5 3 LC402523 1.3 2.3 2.5 3 LC402525 1.4 2.6 2.5 3 LC402529 1.5 3.1 2.5 3 LC402535 1.7 3.9 2.5 3 LC402541 1.9 4.7 2.5 3 LC402547 2.1 5.5 2.5 3 LC402553 2.3 6.3 2.5 3 LC402559 2.5 7.1 2.5 3 LC402921 1.4 2.5 2.5 3 LC402923 1.5 2.8 2.5 3 LC402925 1.5 3.1 2.5 3 LC402929 1.7 3.8 2.5 3 LC402935 1.8 4.7 2.5 3 LC402941 2.0 5.7 2.5 3 LC402947 2.2 6.7 2.5 3 LC402953 2.4 7.6 2.5 3 LC402959 2.6 8.6 2.5 3 LC403221 1.5 2.8 2.5 3 LC403223 1.6 3.1 2.5 3 LC403225 1.6 3.5 2.5 3 LC403229 1.8 4.2 2.5 3 LC403235 1.9 5.3 2.5 3 LC403241 2.1 6.4 2.5 3 LC403247 2.3 7.5 2.5 3 LC403253 2.5 8.6 2.5 3 LC403259 2.7 9.7 2.5 3 LC40

Large Awning Vent and Fixed

UnitVent Area Ft 2

Visible Glass

Ft 2

Standard Glass Thickness (mm) Performance

Class & Grade 1Annealed Tempered

3521 1.6 3.1 2.5 3 LC403523 1.7 3.5 2.5 3 LC403525 1.7 3.9 2.5 3 LC403529 1.8 4.7 2.5 3 LC403535 2.0 5.9 2.5 3 LC403541 2.2 7.2 2.5 3 LC403547 2.4 8.4 2.5 3 LC403553 2.6 9.6 2.5 3 LC403559 2.8 10.8 3 3 LC404121 1.8 3.7 2.5 3 LC404123 1.8 4.2 2.5 3 LC404125 1.9 4.7 2.5 3 LC404129 2.0 5.7 2.5 3 LC404135 2.2 7.2 2.5 3 LC404141 2.4 8.6 2.5 3 LC404147 2.6 10.1 3 3 LC404153 2.8 11.6 3 3 LC404159 3.0 13.0 3 3 LC404721 2.0 4.4 2.5 3 LC404723 2.0 4.9 2.5 3 LC404725 2.1 5.5 2.5 3 LC404729 2.2 6.7 2.5 3 LC404735 2.4 8.4 2.5 3 LC404741 2.6 10.1 3 3 LC404747 2.8 11.8 3 3 LC404753 3.0 13.5 3 3 LC404759 3.2 15.3 3 3 LC405321 2.2 5.0 2.5 3 LC405323 2.2 5.7 2.5 3 LC405325 2.3 6.3 2.5 3 LC405329 2.4 7.6 2.5 3 LC405335 2.6 9.6 2.5 3 LC405341 2.8 11.6 3 3 LC405347 3.0 13.5 3 3 LC405353 3.2 15.5 3 4 LC405359 3.3 17.5 3 4 LC405921 2.3 5.6 2.5 3 LC405923 2.4 6.4 2.5 3 LC405925 2.5 7.1 2.5 3 LC405929 2.6 8.6 2.5 3 LC405935 2.8 10.8 3 3 LC405941 3.0 13.0 3 3 LC405947 3.2 15.3 3 3 LC405953 3.3 17.5 3 4 LC405959 3.5 19.7 4 4 LC40

Design Data - Large Awning



Frame • Select softwood, immersion treated with Pella’s EnduraGuard® wood protection

formula in accordance with WDMA I.S.-4. The EnduraGuard formula includes three active ingredients for protection against the effects of moisture, decay, stains from mold and mildew. Plus, an additional ingredient adds protection against termite damage.

• Interior exposed surfaces are [clear pine] [mahogany] [douglas fir]] [Impact-Resistant: [clear pine] [mahogany]].

• Exterior surfaces are clad with aluminum.• Components are assembled with screws, staples and concealed corner locks.• Overall frame depth is 5" (127mm) for a wall depth of 3-11/16" (94mm).• Optional factory-applied jamb extensions available between 4-9/16" (116mm)

and 7-3/16" (183mm) wall depths.• Optional factory-installed fold-out installation fins with flexible fin corners.• Optional factory-applied EnduraClad® exterior trim.

Sash• Select softwood, immersion treated with Pella’s EnduraGuard wood protection


• Interior exposed surfaces are: [clear pine] [mahogany] [douglas fir]] [Impact-Resistant: [clear pine] [mahogany]].

• Exterior surfaces are clad with aluminum and sealed.• Corners mortised and tenoned, glued and secured with metal fasteners. • Sash thickness is [1-13/16" (46mm) for 11/16"] [2-1/8" (54mm) for 1"] glazing.• Sash exterior and interior profile is ogee.

Weatherstripping• Dual weatherstripping.

� Continuous, flexible santoprene material in dual durometer design with welded corners, compressed between frame and sash for positive seal on all four sides.

� Secondary thermoplastic vulcanizate (TPV) leaf-type weatherstrip between edge of sash and frame.

Glazing System 1• Quality float glass complying with ASTM C 1036.• Custom and high altitude glazing available.• Silicone-glazed 11/16" dual-seal insulating glass [[annealed] [tempered]] [[clear]

[[Advanced Low-E] [SunDefense™ Low-E] [NaturalSun Low-E] [AdvancedComfort Low-E] with argon]] [[bronze] [gray] [green] Advanced Low-E with argon]].

– or –• Silicone-glazed 1" triple-pane, dual-seal insulating glass [[annealed][tempered]]

[[Advanced Low-E] [SunDefense™ Low-E] [NaturalSun Low-E] with [argon] [krypton]]

– or –• Impact-Resistant

� Silicone-glazed 1" dual-seal impact-resistant insulating glass 1 [SGP]. [[tempered] [annealed]] exterior light is [[multi-layer Low-E] [clear] [bronze] [gray] [green]]. Laminated clear interior light.

– or – � Silicone-glazed 11/16" dual-seal impact-resistant insulating glass 1 [PVB].

[[tempered] [annealed]] exterior light is [[multi-layer Low-E] [clear]]. Laminated [clear] interior light, or [[tempered] [annealed]] exterior light is [[multi-layer Low-E]]. Laminated [[bronze] [gray] [green]] interior light.

Exterior• Aluminum-clad exteriors shall be finished with EnduraClad® protective finish, in a

multi-step, baked-on finish. � Color is [Standard] [custom] 2.

– or –• Aluminum-clad exteriors shall be finished with EnduraClad Plus protective finish

with 70% fluoropolymer resin in a multi-step, baked-on finish. � Color is [Standard] [custom] 2.

Interior• [Unfinished, ready for site finishing] [factory primed with one coat acrylic latex]

[factory prefinished [paint] [stain] 1].

Hardware • Roto operator assembly

� Steel worm gear sash operator with hardened gears. � Operator base is zinc die cast with painted finish. � Operator linkage is stainless steel. � Exposed fasteners are stainless steel. � Hardware will exceed 1,000 hours salt spray exposure per ASTM B 117. � Hinge slide and hinge arms are [Awning: Stainless steel] [Large Awning: wash

hinge] [Impact-Resistant: wash hinge].• All vent units are available with operator located on the [Awning: left or right side

as viewed from the exterior] [Large Awning or Impact-Resistant: bottom center of the unit].

• SureLock® System—A single handle locking system operates positive-acting arms that reach out and pull the sash into a locked position: [Awning: one operating lock installed on units with frame widths 29" and less, two unison operating locks installed on units with frame widths over 29"] [Large Awning: one operating lock installed on units with frame heights 41" and less, two unison operating locks installed on units with frame height over 41"].

• Style of hardware is [Standard integrated fold-away crank and standard lock handle with [baked enamel [Champagne] [White] [Brown] [Matte Black]] [bright brass] [satin nickel] [oil-rubbed bronze] hardware finish] [Antiek fold-away crank and Antiek lock handle with [baked enamel [Champagne] [White] [Brown] [Matte Black]] [Bright Brass] [Satin Nickel] [Oil-rubbed Bronze] [Antique Brass] [Distressed Bronze] [Distressed Nickel] hardware finish].

Optional Products

Grilles

• Integral Light Technology® grilles � Interior grilles are [5/8"] [7/8"] [1-1/4"] [2"] ogee profile that are solid [Pine]

[mahogany] [douglas fir]. Interior surfaces are [unfinished, ready for site finishing] [factory primed] [pine: factory prefinished [paint] [stain]1].

� Exterior grilles are [5/8" putty glaze profile] [7/8" [putty glaze] [ogee] profile] [1-1/4" [putty glaze] [ogee] profile] [2" ogee profile] that are extruded aluminum.

� Patterns are [Traditional] [Prairie] [Top Row] [Cross] [New England] [Victorian] [Simulated French (fixed units only)].

� Insulating glass contains non-glare spacer between the panes of glass. � Grilles are adhered to both sides of the insulating glass with VHB acrylic

adhesive tape and aligned with non-glare spacer.– or –

• Grilles-Between-the-Glass 3 � Insulating glass contains 3/4" contoured aluminum grilles permanently

installed between two panes of glass (exterior air-space on triple-pane insulating glass).

� Patterns are [Traditional] [Prairie] [Cross] [Top Row] [Custom – Equally Divided]. � Interior color is [White] [Tan 4] [Brown 4] [Putty 4] [Black] [Morning Sky Gray]

[Ivory] [Sand Dune] [Harvest] [Cordovan] [Brickstone]. � Exterior color 5 is [Standard]2.

– or –• Roomside Removable Grilles

� [[3/4"] [1-1/4"] [2"] Regular] [[1-1/4"] [2"] Colonial] profile, with [Traditional] [Prairie]] patterns that are removable solid pine wood bars steel-pinned at joints and fitted to sash with steel clips and tacks.

� Interior [unfinished, ready for site finishing] [factory primed] [pine: factory prefinished [paint] [stain]2].

� Exterior [unfinished, ready for site finishing] [factory primed] [factory prefinished, finish color matched to exterior cladding 5].

Screens

• InView™ screens � Vinyl-coated 18/18 mesh fiberglass screen cloth complying with the

performance requirements of SMA 1201, set in aluminum frame fitted to inside of window, supplied complete with all necessary hardware.

� Insect screen frame finish is [baked enamel [Champagne] [Artisan Greige] [Skyline Gray] [White] [Brown] [Black]] [Wrapped in wood veneer, finished to match interior finish].

– or –• Vivid View® screens

� PVDF 21/17 mesh, minimum 78 percent light transmissive screen, set in aluminum frame fitted to inside of window, supplied complete with all necessary hardware.


Hardware

• Optional factory applied limited opening hardware available for vent units in stainless steel; nominal 3" opening.

Sensors

• Optional factory installed integrated security sensors available in vent units.

(1) Insulating glass with argon is Low-E coated (except high altitude). All other insulating glass (including high altitude Low-E) is air-filled. (2) Contact your local Pella sales representative for current color options. (3) Available on units glazed with Low-E insulated glass with argon, clear insulated glass and obscure insulated glass. (4) Tan, Brown or Putty Interior GBG colors are available in single-tone (Brown/Brown, Tan/Tan or Putty/Putty). Other interior colors are also available with tan or brown exterior. (5) Appearance of exterior grille color will vary depending on Low-E coating on glass.

Detailed Product Description - Aluminum-Clad Awning and Large Awning



(1) Low-E coated insulating glass is argon-filled (except high altitude). All other insulating glass (including high altitude Low-E) is air-filled.

(2) Available on units glazed with Low-E insulated glass with argon, clear insulated glass and obscure insulated glass.

(3) Contact your local Pella sales representative for current designs and color options.

(4) Tan, Brown or Putty Interior GBG colors are available in single-tone (Brown/Brown, Tan/Tan or Putty/Putty). Other interior colors are also available with Tan or Brown exterior.

(5) Appearance of exterior grille color will vary depending on Low-E coating on glass.

Frame • Select softwood, immersion treated with Pella’s EnduraGuard® wood protection


• Interior exposed surfaces are [clear pine] [mahogany] [douglas fir]] [Impact-Resistant: [clear pine] [mahogany]].

• Exterior surfaces are [pine: factory-primed] [mahogany: [factory-primed] [ready-to-stain]].

• Overall frame depth is 4-3/8" (111mm) for a wall depth of 4-3/16" (106mm).• Optional factory-applied jamb extensions available between 4-9/16"

(116mm) and 7-3/16" (183mm) wall depths, with Pella's standard wood exterior.

Sash• Select softwood, immersion treated with Pella’s EnduraGuard® wood protection


• Interior exposed surfaces are [clear pine] [mahogany] with no visible fastener holes.

• Exterior Surfaces are [pine: factory-primed] [mahogany [factory-primed] [ready-to-stain]].

• Corners mortised and tenoned, glued and secured with metal fasteners. • Sash thickness is [1-13/16" (46mm) for 11/16"] [2-1/8" (54mm) for 1"] glazing.• Sash exterior profile is putty glaze, interior profile is ogee.

Weatherstripping• Dual weatherstripping.

� Continuous, flexible santoprene material in dual durometer design with welded corners, compressed between frame and sash for positive seal on all four sides.

� Secondary thermoplastic vulcanizate (TPV) leaf-type weatherstrip between edge of sash and frame.

Glazing System• Quality float glass complying with ASTM C 1036.• Custom and high altitude [with argon] glazing available.

� Silicone-glazed 11/16" dual-seal insulating glass [[annealed] [tempered]] [[clear] [[Advanced Low-E] [SunDefense™ Low-E] [AdvancedComfort Low-E] [NaturalSun Low-E] with argon]] [[bronze] [gray] [green] Advanced Low-E with argon]].

– or – � Silicone-glazed 1" triple-pane insulating glass [[annealed][tempered]]

[[Advanced Low-E ] [SunDefense™ Low-E] [NaturalSun Low-E] with [argon] [krypton]]

Interior• [Unfinished, ready for site finishing] [factory primed with one coat acrylic latex]

[factory prefinished [paint] [stain]2].

Hardware • Roto operator assembly

� Steel worm gear sash operator with hardened gears. � Operator base to be zinc die cast with painted finish. � Operator linkage, hinge slide, and hinge arms are stainless steel. � Exposed fasteners are stainless steel. � Hardware will exceed 1,000 hours salt spray exposure per ASTM B 117.

• All vent units are available with operator located on the [Awning: left or right side as viewed from the exterior] [Large Awning: bottom center of the unit].

• SureLock® System—A single handle locking system operates positive-acting arms that reach out and pull the sash into a locked position: [Awning: one operating lock installed on units with frame width 29" and less, two unison operating locks installed on units with frame width over 29"] [Large Awning: one operating lock installed on units with frame heights 41" and less, two unison operating locks installed on units with frame height over 41"].

• Style of hardware is [Standard integrated fold-away crank and standard lock handle with [baked enamel [Champagne] [White] [Brown] [Matte Black]] [bright brass] [satin nickel] [oil-rubbed bronze] hardware finish][Antiek fold-away crank and Antiek lock handle with [baked enamel [Champagne] [White] [Brown] [Matte Black]] [Bright Brass] [Satin Nickel] [Oil-rubbed Bronze] [Antique Brass] [Distressed Bronze] [Distressed Nickel] hardware finish].

Optional Products

Grilles

• Integral Light Technology® grilles � Interior grilles are solid [5/8"] [7/8"] [1-1/4"] ogee profile that are solid [pine]

[mahogany]. Interior surfaces are [unfinished, ready for site finishing] [factory primed] [pine: factory prefinished [paint] [stain]3].

� Exterior grilles are solid [5/8"] [7/8"] [1-1/4"] putty glaze profile that are [pine] [mahogany]. Exterior surfaces are water repellent, preservative-treated in accordance with WDMA I.S.-4, and are [unfinished, ready for site finishing] [factory primed].

� Patterns are [Traditional] [Prairie] [Top Row] [Cross] [New England] [Victorian] [Simulated French (fixed units only)].

� Insulating glass contains non-glare spacer between the panes of glass. � Grilles are adhered to both sides of the insulating glass with VHB acrylic

adhesive tape and aligned with the non-glare spacer.– or –

• Grilles-Between-the-Glass 2 � Insulating glass contains 3/4" contoured aluminum grilles permanently

installed between two panes of glass (exterior air-space on triple-pane insulating glass).

� Patterns are [Traditional] [Prairie] [Cross] [Top Row] [Custom – Equally Divided]. � Interior color is [White] [Tan 4] [Brown 4] [Putty 4] [Black] [Morning Sky Gray]

[Ivory] [Sand Dune] [Harvest] [Cordovan] [Brickstone]. � Exterior color 5 is [standard]3.

– or –• Roomside Removable Grilles

� [[3/4"] [1-1/4"] [2"] Regular] [[1-1/4"] [2"] Colonial] profile, with [Traditional] [Prairie] patterns that are removable solid pine wood bars steel-pinned at joints and fitted to sash with steel clips and tacks.

� Interior [unfinished, ready for site finishing] [factory primed] [pine: factory prefinished [paint] [stain]3].

� Exterior [unfinished, ready for site finishing] [factory-primed] [finish color matched to exterior cladding].

Screens

• InView™ Screens � Vinyl-coated 18/18 mesh fiberglass screen cloth complying with the

performance requirements of SMA 1201, set in aluminum frame fitted to inside of window, supplied complete with all necessary hardware.


– or –• Vivid View® Screens

� PVDF 21/17 mesh, minimum 78 percent light transmissive screen, set in aluminum frame fitted to inside of window, supplied complete with all necessary hardware.


Hardware

� Optional factory applied limited opening hardware available for vent units in stainless steel; nominal 3" opening.

Sensors

• Optional factory installed integrated security sensors available in vent units.

Detailed Product Description - Wood Exterior Awning and Large Awning



Solid Mahogany or Pine

Solid Pine

Douglas Fir

JAMBS

SILL

HEAD

JAMBS

SILL

HEAD

Unit Sections – Aluminum-Clad Exterior - Wood Collection

Scale 3" = 1' 0"

All dimensions are approximate.

See www.PellaADM.com for mullion limitations and reinforcing requirements.



[46]1 13/16"

[46]

1 13

/16"

[46]

1 13

/16"

[46]1 13/16"

FRAME WIDTH

[47]1 7/8"

[19]3/4"

[73]2 7/8"

[33]

1 5/

16"

[94]

3 11

/16"

Installation FinOptional Fold-out

FRA

ME

HE

IGH

T

[70]

2 3/

4"[1

9]3/

4"[4

7]1

7/8"

FRAME WIDTH

FRA

ME

HE

IGH

T

[47]1 7/8"

[19]3/4"

[75]2 15/16"

[73]

2 7/

8"[1

9]3/

4"[4

8]1

7/8"

[19]3/4"

[19]

3/4"

[19]3/4"

[33]

1 5/

16"

[94]

3 11

/16"

[127]5"


VENT

FIXED

VENT / FIXEDVERTICAL JOINING MULLION

VENT / VENTVERTICAL JOINING MULLION

VENT / VENTHORIZONTAL JOINING MULLION

J

FS

FH

OJ

VH

VS

FJ

JAMBJ

FS FIXED SILL

FH FIXED HEAD

OPERATOR JAMBOJ

FJ FIXED JAMB

VH VENT HEAD

VS VENT SILL

Scale 3" = 1' 0"


See Combinations Section for mullion limitations and reinforcing requirements.

Unit Sections – Aluminum-Clad Exterior, Ogee Exterior Profile

Typical Joining Mullions



Scale 3" = 1' 0"



VENT

FIXED

[46]

1 13

/16"

[46]

1 13

/16"

[46]1 13/16"

[73]

2 7/

8"

FRAM

E H

EIG

HT

[138]5 7/16"

[28]

1 1/

16"

[46]

1 13

/16" [47]

1 7/8"[19]3/4"

[73]2 7/8"

FRAME WIDTH

[19]3/4"

[30]1 3/16"

[30]1 3/16"

[29]

1 1/

8"[1

06]

4 3/

16"

[19]

3/4"

[47]

1 7/

8"

[111]4 3/8"

[73]

2 7/

8"

FRAM

E H

EIG

HT

[138]5 7/16"

[28]

1 1/

16"

[46]

1 13

/16"

Shown1-1/8" Subsill #3544

1-78" Brickmould #3443

[47]1 7/8"

[19]3/4"

[73]2 7/8"

FRAME WIDTH

[19]3/4"

[30]1 3/16"

[30]1 3/16"

[19]3/4"

[29]

1 1/

8"[1

06]

4 3/

16"


FIXED / VENTHORIZONTAL JOINING MULLION


[19]

3/4"

[47]

1 7/

8"

[111]4 3/8"

VJ

LS

FS

FH

OJ

VH

FJ

FS FIXED SILL

FH FIXED HEAD

FJ FIXED JAMB

LOCK JAMBLJ HINGE JAMBHJ

VH VENT HEAD

VS VENT SILL

Unit Sections – Wood Exterior, Putty Exterior Profile



[46]

1 13

/16"

[46]1 13/16"

FIXED / VENTHORIZONTAL JOINING MULLION


FRAME WIDTH

FRA

ME

HE

IGH

T

[47]1 7/8"

[19]3/4"

[73]2 7/8"

[72]

2 7/

8"[1

9]3/

4"[4

8]1

7/8"

[19]3/4"

[19]

3/4"

[33]

1 5/

16"

[94]

3 11

/16"

[127]5"


VENT


LJ

VH

VS

LOCK JAMBLJ

VH VENT HEAD

VS VENT SILL

Scale 3" = 1' 0"



Unit Sections – Large Awning Aluminum-Clad Exterior, Ogee Exterior Profile

Typical Joining Mullions



Scale 3" = 1' 0"


See www.PellaADM.com for mullion limitations and reinforcing requirements.

VENT

[46]

1 13

/16"[46]

1 13/16"

[73]

2 7/

8"

FRAM

E H

EIG

HT

[138]5 7/16"

[28]

1 1/

16"

[46]

1 13

/16"

Shown1-1/8" Subsill #3544

1-78" Brickmould #3443

[47]1 7/8"

[19]3/4"

[73]2 7/8"

FRAME WIDTH

[19]3/4"

[30]1 3/16"

[30]1 3/16"

[19]3/4"

[29]

1 1/

8"[1

06]

4 3/

16"

[19]

3/4"

[47]

1 7/

8"

[111]4 3/8"

VS

LJ

VH

LOCK JAMBLJ

VH VENT HEAD

VS VENT SILL

Unit Sections – Large Awning Wood Exterior, Putty Exterior Profile

architect series traditional awning window · 2020. 8. 20. · architect series® traditional...

Documents