architectural led tape light (12v ac) led tape damp ...€¦ · architectural led tape light (12v...

3
Page 1 - Revised 07/18 key features •field cuttable led (every 2”) •120° viewing angle •uv rated epoxy silicone coating (ip65) •even light distribution •3m mounting tape •300 leds per roll •3 ft leads on both ends •fully dimmable* product specificationS dimensions wattage ip rating max run voltage dimmable lead wire 3 /8”w x 16.4 ft roll 4.5w per foot (72w per roll) ip65 (damp rated) 16.4 ft 11-13v ac/dc yes* (see installation guidelines) 3 ft leads on each end of roll LED CHANNEL AND LENS OPTIONS SLIM PROFILE CHANNEL & LENS** MODEL DIMENSIONS MATERIAL LENS MATERIAL LENGTHS LED TCH SL 11/16”W X 5/16”H ALUMINUM OPAQUE ACRYLIC 48” PIECES Slim Profile Channel & Lens is best for slim profile installs where a heavy diffuser lens is needed. **LENS INCLUDED (EACH SET INCLUDES: 2 ENDS, 3 MOUNTING CLIPS & 3 SCREWS) PRO CHANNEL & LENS* MODEL LENS MODEL DIMENSIONS MATERIAL LENS MATERIAL LENGTHS LED TCH 369 LED TCH FROST 3/4”W X 1/2”H ALUMINUM FROST ACRYLIC 48” PIECES *OPTIONAL LENS Pro Channel & Lens is best for installs where a diffuser lens is needed. Simply adjust the lens to different levels. GLARE CONTROL CHANNEL MODEL DIMENSIONS MATERIAL LENGTHS LED TCH L 1/2”W X 3/8”H ALUMINUM 48” PIECES Glare Control Channel gives you added glare protection for multi level LED tape installs. EZ CHANNEL MODEL DIMENSIONS MATERIAL LENGTHS LED TCH A 1/2”W X 1/8”H ALUMINUM 48” PIECES EZ Channel is best for slim profile installs in which there is no need for a lens cover. led tape lighting LED-OT-4.5W PROJECT TYPE DATE lightcraft outdoor | 9811 owensmouth ave | unit 1 | chatsworth, ca 91311 phone: 818.349.2663 | fax: 818.349.2676 | e-mail: [email protected] ARCHITECTURAL LED TAPE LIGHT (12V AC) DAMP LOCATION - OUTDOOR (IP65) CATALOG # Our Architectural LED Tape is now designed to be used with existing 12V AC landscape transformers without the use of a dedicated driver or converter. Architectural LED Tape is used under stairs, steps, toe kicks, counters, cabinets, bars, coves, overhead soffits, etc. Each roll comes with 3 ſt. leads on each side of the roll and is field cuttable. Use our optional channels, lenses and connectors to create the perfect custom installation. (Also works with 12V DC power) 3/8”W HIGH CRI SMD 5050 LED CUT-ABLE EVERY 2” 5/8” DIODE SPACING MODEL KELVIN WATTAGE LUMENS IP RATING MAX RUN LED-OT-4.5W 2700K 4.5W/FT 342lm/ſt IP65 16.4 FT 3000K 360lm/ſt

Upload: others

Post on 07-Jun-2020

8 views

Category:

Documents


0 download

TRANSCRIPT

Page 1: ARCHITECTURAL LED TAPE LIGHT (12V AC) led tape DAMP ...€¦ · ARCHITECTURAL LED TAPE LIGHT (12V AC) DAMP LOCATION - OUTDOOR (IP65) ... SMD 5050 LED CUT-ABLE EVERY 2” 5/8” DIODE

Page

1 -

Rev

ised

07/

18

key features•field cuttable led (every 2”)•120° viewing angle•uv rated epoxy silicone coating (ip65)•even light distribution•3m mounting tape•300 leds per roll•3 ft leads on both ends•fully dimmable*

product specificationSdimensionswattageip ratingmax runvoltagedimmablelead wire

3/8”w x 16.4 ft roll4.5w per foot (72w per roll)ip65 (damp rated)16.4 ft11-13v ac/dcyes* (see installation guidelines)3 ft leads on each end of roll

LED CHANNEL AND LENS OPTIONS

SLIM PROFILECHANNEL & LENS**

MODELDIMENSIONS

MATERIALLENS MATERIAL

LENGTHS

LED TCH SL11/16”W X 5/16”HALUMINUMOPAQUE ACRYLIC48” PIECES

Slim Profile Channel & Lens is best for slim profile installs where a heavy diffuser lens is needed.

**LENS INCLUDED(EACH SET INCLUDES: 2 ENDS, 3 MOUNTING CLIPS & 3 SCREWS)

PRO CHANNEL &LENS*

MODELLENS MODELDIMENSIONS

MATERIALLENS MATERIAL

LENGTHS

LED TCH 369LED TCH FROST3/4”W X 1/2”HALUMINUMFROST ACRYLIC48” PIECES*OPTIONAL LENS

Pro Channel & Lens is best for installs where a diffuser lens is needed. Simply adjust the lens to different levels.

GLARE CONTROL CHANNEL

MODELDIMENSIONS

MATERIALLENGTHS

LED TCH L1/2”W X 3/8”HALUMINUM48” PIECES

Glare Control Channel gives you added glare protection for multi level LED tape installs.

EZ CHANNEL

MODELDIMENSIONS

MATERIALLENGTHS

LED TCH A1/2”W X 1/8”HALUMINUM48” PIECES

EZ Channel is best for slim profile installs in which there is no need for a lens cover.

led

ta

peli

gh

tin

g

LED-OT-4.5W

PROJECT

TYPE

DATE

lightcraft outdoor | 9811 owensmouth ave | unit 1 | chatsworth, ca 91311phone: 818.349.2663 | fax: 818.349.2676 | e-mail: [email protected]

ARCHITECTURAL LED TAPE LIGHT (12V AC)DAMP LOCATION - OUTDOOR (IP65)

CATALOG #

Our Architectural LED Tape is now designed to be used with existing 12V AC landscape transformers without the use of a dedicated driver or converter. Architectural LED Tape is used under stairs, steps, toe kicks, counters, cabinets, bars, coves, overhead soffits, etc. Each roll comes with 3 ft. leads on each side of the roll and is field cuttable. Use our optional channels, lenses and connectors to create the perfect custom installation. (Also works with 12V DC power)

3/8”W

HIGH CRISMD 5050 LED CUT-ABLE EVERY 2” 5/8” DIODE SPACING

MODEL KELVIN WATTAGE LUMENS IP RATING MAX RUN

LED-OT-4.5W2700K

4.5W/FT342lm/ft

IP65 16.4 FT3000K 360lm/ft

Page 2: ARCHITECTURAL LED TAPE LIGHT (12V AC) led tape DAMP ...€¦ · ARCHITECTURAL LED TAPE LIGHT (12V AC) DAMP LOCATION - OUTDOOR (IP65) ... SMD 5050 LED CUT-ABLE EVERY 2” 5/8” DIODE

Page

2 -

Rev

ised

07/

18

snap-on ConnectorsINDOOR/OUTDOOR RATED

Our Snap-On connectors are designed to easily connect additional power leads, jumpers and for joining 2 rolls together. The connectors do not require soldering; simply cut at the designated marks and snap-on.

LED POWER LEADLED-PWR-WL-10MM

The LED Power Lead adds power to the LED tape without factory lead after the initial 2 factory installed leads on the LED tape have been used.

RoundedSide

FlatSide

Use a thin flat head screwdriver to gently open the end connector.

Rounded side opens up.Flat side has tiny prongs.Place LED tape with 3M portion facing flat side.

Place LED tape pressing slightly onto prongs. Small puncture holes will appear in the LED tape.

Press down on connector until it clicks. Test the LED tape to make sure a secure contact is made.

PRO INSTALL TIP:SEALING THE ENDS

While not necessary, for added protection we recommend you seal the ends that are not using connectors, with heat shrink.

(SEE PICTURES)

LED TRACK, LENS & ACCESSORIES

SNAP-ON CONNECTORSINDOOR / OUTDOOR RATED

HIGH CRISMD 3528 LED CUTTABLE EVERY 4” 1-1/4” DIODE SPACING

3/8”W

3/8”W

3/8”W

HIGH CRISMD 3528 LED CUTTABLE EVERY 2” 5/8” DIODE SPACING

MODEL KELVIN WATTAGE LUMENS IP RATING MAX RUN

LED-OT-1.5W2700K

1.5W/FT114lm/ft

IP65 32.8 FT3000K 120lm/ft

MODEL KELVIN WATTAGE LUMENS IP RATING MAX RUN

LED-OT-0.75W2700K

0.75W/FT57lm/ft

IP65 32.8 FT3000K 60lm/ft

MODEL KELVIN WATTAGE LUMENS IP RATING MAX RUN

LED-OT-4.5W2700K

4.5W/FT342lm/ft

IP65 16.4 FT3000K 360lm/ft

HIGH CRISMD 5050 LED CUTTABLE EVERY 2” 5/8” DIODE SPACING

EZ CHANNEL

MODELDIMENSIONS

MATERIALLENGTHS

LED TCH A1/2”W X 1/8”HALUMINUM40” PIECES

MODELDIMENSIONS

LED-PWR-WL-10MM5/8”W x 5/8”L x 3 FT LEAD

MODELDIMENSIONS

LED-IL-JUMPER-10MM5/8”W x 5/8”L x 3 IN JUMPER x5/8”W x 5/8”L

MODELDIMENSIONS

LED-IL-CONN-10MM5/8”W x 5/8”L

GLARE CONTROL CHANNEL

MODELDIMENSIONS

MATERIALLENGTHS

LED TCH L1/2”W X 3/8”HALUMINUM48” PIECES

PRO CHANNEL &LENS*

MODELLENS MODELDIMENSIONS

MATERIALLENS MATERIAL

LENGTHS

LED TCH 369LED TCH FROST3/4”W X 1/2”HALUMINUMACRYLIC48” PIECES*OPTIONAL LENS/ADJUSTABLE HT

LOW PROFILECHANNEL & LENS**

MODELDIMENSIONS

MATERIALLENS MATERIAL

LENGTHS

LED TCH 3151/2”W X 1/4”HALUMINUMACRYLIC48” PIECES**LENS INCLUDED

LED TAPE LIGHTING WWW.LIGHTCRAFTOUTDOOR.COM44

LED

TA

PELI

GH

TIN

GLED DAMP LOCATION TAPE (12V AC*)SOLD IN 16.4 FT ROLLS WITH 3 FT LEADS ON BOTH ENDS

Our LED Tape is now designed to be used with existing 12V AC landscape tranformers without the use of a dedicated driver or converter. LED Tape is typically used under stairs, toe kicks, counters, cabinets, bars, coves, overhead soffits, etc. Tape light is dimmable (see spec sheet). *Also works on DC power.

LED IN-LINE JUMPERLED-IL-JUMPER-10MM

The LED In-Line Jumper gives you the ability to create designs with a wide range of turns on one continuous run. (Max run: 32.8 ft for 0.75W & 1.5W models; 16.4 ft for 4.5W model)LED TRACK, LENS & ACCESSORIES

SNAP-ON CONNECTORSINDOOR / OUTDOOR RATED

HIGH CRISMD 3528 LED CUTTABLE EVERY 4” 1-1/4” DIODE SPACING

3/8”W

3/8”W

3/8”W

HIGH CRISMD 3528 LED CUTTABLE EVERY 2” 5/8” DIODE SPACING

MODEL KELVIN WATTAGE LUMENS IP RATING MAX RUN

LED-OT-1.5W2700K

1.5W/FT114lm/ft

IP65 32.8 FT3000K 120lm/ft

MODEL KELVIN WATTAGE LUMENS IP RATING MAX RUN

LED-OT-0.75W2700K

0.75W/FT57lm/ft

IP65 32.8 FT3000K 60lm/ft

MODEL KELVIN WATTAGE LUMENS IP RATING MAX RUN

LED-OT-4.5W2700K

4.5W/FT342lm/ft

IP65 16.4 FT3000K 360lm/ft

HIGH CRISMD 5050 LED CUTTABLE EVERY 2” 5/8” DIODE SPACING

EZ CHANNEL

MODELDIMENSIONS

MATERIALLENGTHS

LED TCH A1/2”W X 1/8”HALUMINUM40” PIECES

MODELDIMENSIONS

LED-PWR-WL-10MM5/8”W x 5/8”L x 3 FT LEAD

MODELDIMENSIONS

LED-IL-JUMPER-10MM5/8”W x 5/8”L x 3 IN JUMPER x5/8”W x 5/8”L

MODELDIMENSIONS

LED-IL-CONN-10MM5/8”W x 5/8”L

GLARE CONTROL CHANNEL

MODELDIMENSIONS

MATERIALLENGTHS

LED TCH L1/2”W X 3/8”HALUMINUM48” PIECES

PRO CHANNEL &LENS*

MODELLENS MODELDIMENSIONS

MATERIALLENS MATERIAL

LENGTHS

LED TCH 369LED TCH FROST3/4”W X 1/2”HALUMINUMACRYLIC48” PIECES*OPTIONAL LENS/ADJUSTABLE HT

LOW PROFILECHANNEL & LENS**

MODELDIMENSIONS

MATERIALLENS MATERIAL

LENGTHS

LED TCH 3151/2”W X 1/4”HALUMINUMACRYLIC48” PIECES**LENS INCLUDED

LED TAPE LIGHTING WWW.LIGHTCRAFTOUTDOOR.COM44

LED

TA

PELI

GH

TIN

G

LED DAMP LOCATION TAPE (12V AC*)SOLD IN 16.4 FT ROLLS WITH 3 FT LEADS ON BOTH ENDS

Our LED Tape is now designed to be used with existing 12V AC landscape tranformers without the use of a dedicated driver or converter. LED Tape is typically used under stairs, toe kicks, counters, cabinets, bars, coves, overhead soffits, etc. Tape light is dimmable (see spec sheet). *Also works on DC power.

Set up your 2 strips as noted in the picture above.

Press down on both connectors until they click.

Test the LED tape to make sure a secure contact is made.

LED IN-LINE COUPLERLED-IL-CONN-10MM

The LED In-Line Coupler lets you join 2 LED strips together.(Max run: 32.8 ft for 0.75W & 1.5W models; 16.4 ft for 4.5W model)

1.

2.

Note: Jumper can be shortened in the field using a small zip tie to accommodate smaller spaces.

Make sure that both LED strips are placed with the 3M side facing the prongs.

Press down on both connectors until they click. Test the LED tape to make sure a secure contact is made.

Open Here

Before After

NOTE: Two contact prongs pierce oval shape contact points on LED strip.

NOTE: Two contact prongs pierce oval shape contact points on LED strip.

NOTE: Two contact prongs pierce oval shape contact points on LED strip.

product specificationSdimensionlead wire

5/8”w x 5/8”H x 3 ft lead3 ft

product specificationSdimension 5/8”w x 5/8”H x 3” jumper

x 5/8”w x 5/8”H

product specificationSdimension 5/8”w x 5/8”h

LED TRACK, LENS & ACCESSORIES

SNAP-ON CONNECTORSINDOOR / OUTDOOR RATED

HIGH CRISMD 3528 LED CUTTABLE EVERY 4” 1-1/4” DIODE SPACING

3/8”W

3/8”W

3/8”W

HIGH CRISMD 3528 LED CUTTABLE EVERY 2” 5/8” DIODE SPACING

MODEL KELVIN WATTAGE LUMENS IP RATING MAX RUN

LED-OT-1.5W2700K

1.5W/FT114lm/ft

IP65 32.8 FT3000K 120lm/ft

MODEL KELVIN WATTAGE LUMENS IP RATING MAX RUN

LED-OT-0.75W2700K

0.75W/FT57lm/ft

IP65 32.8 FT3000K 60lm/ft

MODEL KELVIN WATTAGE LUMENS IP RATING MAX RUN

LED-OT-4.5W2700K

4.5W/FT342lm/ft

IP65 16.4 FT3000K 360lm/ft

HIGH CRISMD 5050 LED CUTTABLE EVERY 2” 5/8” DIODE SPACING

EZ CHANNEL

MODELDIMENSIONS

MATERIALLENGTHS

LED TCH A1/2”W X 1/8”HALUMINUM40” PIECES

MODELDIMENSIONS

LED-PWR-WL-10MM5/8”W x 5/8”L x 3 FT LEAD

MODELDIMENSIONS

LED-IL-JUMPER-10MM5/8”W x 5/8”L x 3 IN JUMPER x5/8”W x 5/8”L

MODELDIMENSIONS

LED-IL-CONN-10MM5/8”W x 5/8”L

GLARE CONTROL CHANNEL

MODELDIMENSIONS

MATERIALLENGTHS

LED TCH L1/2”W X 3/8”HALUMINUM48” PIECES

PRO CHANNEL &LENS*

MODELLENS MODELDIMENSIONS

MATERIALLENS MATERIAL

LENGTHS

LED TCH 369LED TCH FROST3/4”W X 1/2”HALUMINUMACRYLIC48” PIECES*OPTIONAL LENS/ADJUSTABLE HT

LOW PROFILECHANNEL & LENS**

MODELDIMENSIONS

MATERIALLENS MATERIAL

LENGTHS

LED TCH 3151/2”W X 1/4”HALUMINUMACRYLIC48” PIECES**LENS INCLUDED

LED TAPE LIGHTING WWW.LIGHTCRAFTOUTDOOR.COM44

LED

TA

PELI

GH

TIN

G

LED DAMP LOCATION TAPE (12V AC*)SOLD IN 16.4 FT ROLLS WITH 3 FT LEADS ON BOTH ENDS

Our LED Tape is now designed to be used with existing 12V AC landscape tranformers without the use of a dedicated driver or converter. LED Tape is typically used under stairs, toe kicks, counters, cabinets, bars, coves, overhead soffits, etc. Tape light is dimmable (see spec sheet). *Also works on DC power.

led

ta

peli

gh

tin

gPROJECT

TYPE

DATE

lightcraft outdoor | 9811 owensmouth ave | unit 1 | chatsworth, ca 91311phone: 818.349.2663 | fax: 818.349.2676 | e-mail: [email protected]

CATALOG #

Page 3: ARCHITECTURAL LED TAPE LIGHT (12V AC) led tape DAMP ...€¦ · ARCHITECTURAL LED TAPE LIGHT (12V AC) DAMP LOCATION - OUTDOOR (IP65) ... SMD 5050 LED CUT-ABLE EVERY 2” 5/8” DIODE

Page

3 -

Rev

ised

07/

18

CATALOG #

sNAP-ON CONNECTOR OPTIONS

step 3

MODEL

LED-PWR-WL-10MM

qty

MODEL

LED-IL-JUMPER-10MM

LED In-Line Jumper - 3 in. Jumper

qty MODEL

LED-SHRINK-SM-BK

Heat Shrink - Black - Sold by the foot

qty

MODEL

LED-IL-CONN-10MM

LED In-Line Connector

qty

LED Power Lead - 3 ft. Lead

ft.

MAX RUN INFORMATIONLED-OT-4.5W has a max run of 16.4 ft per dedicated run. Exceeding this length will void any factory warranty. INSTALLATION NOTES: For outdoor applications, do not install the LED tape with the surface facing up. The LED tape is not submersible and should not be installed near salt water or chemicals. Do not use near water with chemicals such as chlorine. Needs to be placed 10 ft. from water. Installing it without following these guidelines will void factory warranty. (Contact factory for details)

MOUNTING INSTALLATION: We recommend using additional adhesive specific to the surface you are adhering the LED tape to.

*PRIMARY SIDE DIMMING: Requires LED magnetic low voltage (MLV) or LED electronic low voltage (ELV) dimmable transformer and compatible LED dimmer (MLV OR ELV) For more information see installation guidelines+ Fully tested with Lutron Diva (DVLV-600P) dimmer and Lightcraft dimmable transformers.

submittal sheet

*Lens Option - Specify LED-TCH-FROST-48 if needed for LED-TCH-369-48 Channel

LED-TCH-SL-48 - Sold in a set of Channel & Lens

track & lens configuration

led-tch-a-48

led-tch-l-48

led-tch-369-48

led-tch-frost-48

led-tch-sl-48

ez channel - 48”

glare control channel - 48”

deep pro channel - 48”

frost lens for deep pro channel - 48” (Optional for LED-TCH-369-48)

slim profile channel & lens - 48” set (Lens, Mounting Clips & Screws Included)

step 2

model

led-tchqty Lens option*channel

fixture configuration# of rolls

step 1

LED Tape is sold in 16.4 ft rolls

led-ot-4.5wkelvin option

27k

30k

2700k

3000k

installation guidelines

led

ta

peli

gh

tin

gPROJECT

TYPE

DATE

lightcraft outdoor | 9811 owensmouth ave | unit 1 | chatsworth, ca 91311phone: 818.349.2663 | fax: 818.349.2676 | e-mail: [email protected]