· we are recognized in the bearing industry as the premier supplier of bearing accessories...

BearingAccessoriesandPillowBlocksCatalog

ADAPTERS ADAPTERS FOR BEARING SERIES 230, 231, 12, 222

ADAPTERS FOR BEARING SERIES 232, 13, 223

ADAPTER SLEEVES SERIES S00, S100

ADAPTER SLEEVES SERIES S30, S31, S32

METRIC ADAPTERS SERIES H2, H3, H23, H30, H31, H32, H39

METRIC ADAPTER SLEEVES SERIES H2, H3

METRIC ADAPTER SLEEVES SERIES H30



WITHDRAWAL SLEEVES WITHDRAWAL SLEEVES SK & ASK-SERIES DIMENSIONS

WITHDRAWAL SLEEVES METRIC AH-SERIES

REMOVAL NUTS REMOVAL NUTS RN SERIES DIMENSIONS

LOCKNUTS LOCKNUTS N-00 SERIES DIMENSIONS

LOCKNUTS N-00 SERIES SHAFT DIMENSIONS

LOCKNUTS N-000 SERIES DIMENSIONS

LOCKNUTS N-000 SERIES SHAFT DIMENSIONS

LOCKNUTS PRN/PRL-00 SERIES DIMENSIONS (precision)

LOCKNUTS PRT-00 SERIES DIMENSIONS (precision thin)

LOCKNUTS SN-00 SERIES DIMENSIONS (self-locking)

LOCKNUTS SNH-00 SERIES DIMENSIONS (self-locking/high temperature)

LOCKNUTS NHE-00 SERIES DIMENSIONS (wide series)

LOCKNUTS NIN-00 SERIES DIMENSIONS (16 threads/inch)

LOCKNUTS NTH-00 SERIES DIMENSIONS (thin series)

LOCKNUTS KM-00 SERIES DIMENSIONS (metric design)

LOCKWASHERS LOCKWASHERS W-00 AND W-000 SERIES DIMENSIONS

LOCKWASHERS PRW-00 SERIES DIMENSIONS (precision)

LOCKWASHERS PRWT-00 SERIES DIMENSIONS (precision thin)

LOCKWASHERS TW-000 SERIES DIMENSIONS (thick)

LOCKWASHERS WTH-00 & WIN-00 SERIES DIMENSIONS (thin & inch series)

LOCKWASHERS MB-00 SERIES DIMENSIONS (metric design)

LOCKPLATES LOCKPLATES P-000 LOCKPLATE SERIES DIMENSIONS

PILLOW BLOCKS PILLOW BLOCKS CAST IRON SAF-200 SERIES (straight bore housing)

PILLOW BLOCKS CAST IRON SAF-300 SERIES (straight bore housing)

PILLOW BLOCKS CAST IRON SAF-500 SERIES (tapered bore housing)



PILLOW BLOCKS STEEL SAFS-200 SERIES (straight bore housing)

PILLOW BLOCKS STEEL SAFS-500 SERIES (tapered bore housing)

MILITARY STANDARD MILITARY STANDARD LOCKNUTS MS 1722 SERIES

MILITARY STANDARD LOCKWASHERS MS 1722 SERIES

MILITARY STANDARD LOCKNUTS MS 19067 SERIES


MILITARY STANDARD LOCKNUTS MS 19068 SERIES


SPANNER WRENCHES SPANNER WRENCHES

RETHREADING DIES RETHREADING DIES DRT-SERIES

CLAMP NUTS CLAMP NUTS NC-SERIES

X WASHERS X-WASHERS MADE IN USA

BearingAccessoriesandPillowBlocksCatalog

2

We are recognized in the bearing industry as the premier supplier of bearing accessories including adapters, locknuts, lockwashers, seal rings, adapter sleeves and, of course, split pillow blocks.

Since 1948, Standard Locknut, LLC has been supporting key industries like the bearing, oil and gas, aerospace, mining, chemical, heavy duty and off-road, with the highest quality and on-time delivery of bearing accessories.

Made in the USA, you can count on it.

We supply our standard split pillow blocks to all corners of the globe. Typically used with a spherical bearing, the housing may be your most important purchase.

It all starts with the castings. We control our quality of pil-low blocks by using castings from molds designed and owned by us.

We supply the industry in sizes from 511 up to 056 in SAF and SAFS. Cast iron, ductile iron or steel, along with the LER seals, we’re prepared to support your pillow block needs.

We also machine customer-supplied pillow blocks, both standard and specials, for those unique and demanding applications.

Either way, our customers have come to depend on us for our reliability, quality and delivery.

Critical to any successful bearing installation is the means of securing the bearing to the shaft. That’s where we come in.

Our line of locking devices includes adapters and sleeves, washers, locknuts and lockwash-ers. Available in metric and inch series, our accessories are manufactured to ABMA, SAE and ABEC standards.

TS19649 AS9100

Certified

Standard Locknut, LLC

“We will meet or exceed all customer expecta ons and con nually improve everything we do.”

CONTACT US TODAY Sales: ......................... (800) 783-6887 Fax: ............................ (800) 573-5515 Email: ........................ [email protected]

www.standardlocknut.com

1045 East 169th Street

Westfield, IN 46074

5

ADAPTER SERIES FOR BEARING SERIES 230, 231, 12, 222 For tapered bore assembly

ADAPTER SERIES

NOMINALBORE ASSEMBLY ASSEMBLY SLEEVE ASSEMBLY ASSEMBLY SLEEVE LOCKNUT LOCKING ASSEMBLY ASSEMBLY SLEEVE ASSEMBLY ASSEMBLY SLEEVE LOCKNUT LOCKING(mm) NO. WT. (LB.) NO. NO. WT. (LB.) NO. NO. DEVICE NO. NO. WT. (LB.) NO. NO. WT. (LB.) NO. NO. DEVICE NO.

20 SNW-04 S-0425 SNW-05 0.17 S-0530 SNW-06 0.24 S-0635 SNW-07 0.32 S-07 SNW-07 0.32 S-07 N-07 W-0740 SNW-08 0.42 S-08 SNW-08 0.42 S-08 N-08 W-0845 SNW-09 0.55 S-09 SNW-09 0.55 S-09 N-09 W-0950 SNW-10 0.67 S-10 SNW-10 0.67 S-10 N-10 W-1055 SNW-11 0.77 S-11 SNW-11 0.77 S-11 N-11 W-1160 SNW-12 0.87 S-12 SNW-12 0.87 S-12 N-12 W-1265 SNW-13 1.01 S-13 SNW-13 1.01 S-13 N-13 W-1370 SNW-14 1.59 S-14 SNW-14 1.59 S-14 N-14 W-1475 SNW-15 1.83 S-15 SNW-15 1.83 S-15 AN-15 W-1580 SNW16 2.27 S-16 SNW-16 2.27 S-16 AN-16 W-1685 SNW-17 2.60 S-17 SNW-17 2.60 S-17 AN-17 W-1790 SNW-18 3.02 S-18 SNW-18 3.02 S-18 AN-18 W-1895 SNW-19 3.44 S-19 AN-19 W-19

100 SNW-20 3.37 S-20 SNW-20 3.73 S-20 AN-20 W-20105110 SNW-3122 4.25 S-22 N-022 W-022 SNW-22 4.81 S-22 SNW-22 4.81 S-22 AN-22 W-22120 SNW-3024 6.16 S-3024 SNW-3124 5.85 S-24 N-024 W-024 SNW-24 6.65 S-24 AN-24 W-24130 SNW-3026 7.50 S-3026 SNW-3126 8.35 S-26 N-026 W-026 SNW-26 9.70 S-26 AN-26 W-26140 SNW-3028 8.45 S-3028 SNW-3128 8.35 S-28 N-028 W-028 SNW-28 10.50 S-28 AN-28 W-28150 SNW-3030 9.80 S-3030 SNW-3130 13.50 S-30 N-030 W-030 SNW-30 16.00 S-30 AN-30 W-30160 SNW-3032 12.00 S-3032 SNW-3132 13.50 S-32 N-032 W-032 SNW-32 15.50 S-32 AN-32 W-32170 SNW-3034 13.50 S-3034 SNW-3134 16.00 S-34 N-034 W-034 SNW-34 19.50 S-34 AN-34 W-34180 SNW-3036 15.00 S-3036 SNW-3136 17.00 S-36 N-036 W-036 SNW-36 20.50 S-36 AN-36 W-36190 SNW-3038 16.50 S-3038 SNW-3138 19.50 S-38 N-038 W-038 SNW-38 23.50 S-38 AN-38 W-38200 SNW-3040 19.50 S-3040 SNW-3140 28.50 S-40 N-040 W-040 SNW-40 30.50 S-40 AN-40 W-40220 SNW-3044 24.50 S-3044 SNW-3144 32.00 S-44 N-044 W-044 SNW-44 32.50 S-44 N-044 W-44240 SNP-3048 32.00 S-3048 SNP-3148 37.50 S-48 N-048 P-48 SNP-48 S-48 N-048 P-48260 SNP-3052 41.00 S-3052 SNP-3152 44.00 S-52 N-052 P-52 SNP-52 S-52 N-052 P-52280 SNP-3056 45.50 S-3056 SNP-3156 46.50 S-3156 N-056 P-56300 SNP-3060 59.00 S-3060 SNP-3160 59.50 S-3160 N-060 P-60320 SNP-3064 65.00 S-3064 SNP-3164 74.00 S-3164 N-064 P-64340 SNP-3068 78.00 S-3068 SNP-3168 93.50 S-3168 N-068 P-68360 SNP-3072 86.00 S-3072 SNP-3172 120.00 S-3172 N-072 P-72380 SNP-3076 94.50 S-3076 SNP-3176 125.00 S-3176 N-076 P-76400 SNP-3080 100.00 S-3080 SNP-3180 140.00 S-3180 N-080 P-80420 SNP-3084 105.00 S-3084 SNP-3184 145.00 S-3184 N-084 P-84440 SNP-3088 S-3088 SNP-3188 S-3188 N-088 P-88460 SNP-3092 S-3092 SNP-3192 S-3192 N-092 P-92480 SNP-3096 S-3096 SNP-3196 S-3196 N-096 P-96500 SNP-30/500 S-30/500 SNP-31/500 S-31/500 N-500 P-500530 SNP-30/530 S-30/530 SNP-31/530 S-31/530 N-530 P-530560 SNP-30/560 S-30/560 SNP-31/560 S-31/560 N-560 P-560600 SNP-30/600 S-30/600 SNP-31/600 S-31/600 N-600 P-600630 SNP-30/630 S-30/630 SNP-31/630 S-31/630 N-630 P-630670 SNP-30/670 S-30/670 SNP-31/670 S-31/670 N-670 P-670710 SNP-30/710 S-30/710 SNP-31/710 S-31/710 N-710 P-710750 SNP-30/750 S-30/750 SNP-31/750 S-31/750 N-750 P-750800 SNP-30/800 S-30/800 SNP-31/800 S-31/800 N-800 P-800850 SNP-30/850 S-30/850 SNP-31/850 S-31/850 N-850 P-850900 SNP-30/900 S-30/900 N-900 P-900950 SNP-30/950 S-30/950 N-950 P-950

222 12 & 222BEARING 230 231 230 & 231 12ADAPTER UNIT ADAPTER UNIT ADAPTER UNIT ADAPTER UNIT

8

ADAPTER SERIES FOR BEARING SERIES 232, 13, 223

For tapered bore assembly

ADAPTER SERIES

NOMINALBORE ASSEMBLY ASSEMBLY SLEEVE ASSEMBLY ASSEMBLY SLEEVE ASSEMBLY ASSEMBLY SLEEVE LOCKNUT LOCKING(mm) NO. WT. (LB.) NO. NO. WT. (LB.) NO. NO. WT. (LB.) NO. NO. DEVICE NO.

20 SNW-04 S-04 N-04 W-0425 SNW-05 0.17 S-05 N-05 W-0530 SNW-06 0.24 S-06 N-06 W-0635 SNW-07 0.32 S-07 N-07 W-0740 SNW-08 0.42 S-08 SNW-108 0.50 S-108 N-08 W-0845 SNW-09 0.55 S-09 SNW-109 0.62 S-109 N-09 W-0950 SNW-10 0.67 S-10 SNW-110 0.80 S-110 N-10 W-1055 SNW-11 0.77 S-11 SNW-111 0.93 S-111 N-11 W-1160 SNW-12 0.87 S-12 SNW-112 1.06 S-112 N-12 W-1265 SNW-13 1.01 S-13 SNW-113 1.23 S-113 N-13 W-1370 SNW-14 1.59 S-14 SNW-114 1.59 S-114 N-14 W-1475 SNW-15 1.83 S-15 SNW-115 2.32 S-115 AN-15 W-1580 SNW-16 2.27 S-16 SNW-116 2.82 S-116 AN-16 W-1685 SNW-17 2.60 S-17 SNW-117 3.20 S-117 AN-17 W-1790 SNW-18 3.02 S-18 SNW-118 3.73 S-118 AN-18 W-1895 SNW-19 3.44 S-19 SNW-119 4.23 S-119 AN-19 W-19

100 SNW-120 4.75 S-120 SNW-20 3.73 S-20 SNW-120 4.74 S-120 AN-20 W-20105 SNW-21 4.30 S-21 AN-21 W-21110 SNW-122 6.04 S-122 SNW-22 4.81 S-22 SNW-122 6.04 S-122 AN-22 W-22120 SNW-124 7.03 S-124 SNW-124 7.03 S-124 AN-24 W-24130 SNW-126 10.10 S-126 SNW-126 10.10 S-126 AN-26 W-26140 SNW-128 12.20 S-128 SNW-128 12.20 S-128 AN-28 W-28150 SNW-130 14.60 S-130 SNW-130 14.60 S-130 AN-30 W-30160 SNW-132 20.20 S-132 SNW-132 20.20 S-132 AN-32 W-32170 SNW-134 22.50 S-134 SNW-134 22.50 S-134 AN-34 W-34180 SNW-136 24.90 S-136 SNW-136 24.90 S-136 AN-36 W-36190 SNW-138 27.80 S-138 SNW-138 27.80 S-138 AN-38 W-38200 SNW-140 30.60 S-140 SNW-140 30.60 S-140 AN-40 W-40220 SNW-144 36.80 S-144 SNW-144 36.80 S-144 N-44 W-44240 SNP-148 48.50 S-148 SNW-148 48.50 S-148 N-048 P-48260 SNP-152 54.50 S-152 SNW-152 54.50 S-152 N-052 P-52280 SNP-3256 59.00 S-3256 N-056 P-56300 SNP-3260 68.50 S-3260 N-060 P-60320 SNP-3264 98.00 S-3264 N-064 P-64340 SNP-3268 105.00 S-3268 N-068 P-68360 SNP-3272 135.00 S-3272 N-072 P-72380 SNP-3276 145.00 S-3276 N-076 P-76400 SNP-3280 165.00 S-3280 N-080 P-80420 SNP-3284 195.00 S-3284 N-084 P-84440 SNP-3288 S-3288 N-088 P-88460 SNP-3292 S-3292 N-092 P-92480 SNP-3296 S-3296 N-096 P-96500 SNP-32/500 S-32/500 N-500 P-500530 SNP-32/530 S-32/530 N-530 P-530560 SNP-32/560 S-32/560 N-560 P-560600 SNP-32/600 S-32/600 N-600 P-600630 SNP-32/630 S-32/630 N-630 P-630670 SNP-32/670 S-32/670 N-670 P-670710 SNP-32/719 S-32/710 N-710 P-710750 SNP-32/750 S-32/750 N-750 P-750

232, 13 & 223ADAPTER UNIT ADAPTER UNIT ADAPTER UNIT

BEARING 232 13 223

9

ADAPTER SLEEVE SERIES


S00 SERIES FOR BEARING SERIES 12, 13, 222, 231 S100 SERIES FOR BEARING SERIES 223, 232 For tapered bore assembly

BORE DIA.MAJOR DIA. THD. LENGTH WIDTH WIDTH DEPTH

d B G F P TMAX. MAX. K1 MAX. MIN. MIN. MIN.

S00 S100 S00 S100 S00 S100S04 S104 0.692 0.855 0.875 1.224 1.460 0.781 32 0.531 0.07 0.240 0.691S05 S105 0.754 1.052 1.082 1.259 1.617 0.969 32 0.570 0.07 0.240 0.741S06 S106 0.942 1.256 1.292 1.343 1.779 1.173 18 0.632 0.07 0.240 0.822S07 S107 1.192 1.459 1.499 1.449 1.922 1.376 18 0.664 0.07 0.240 0.863S08 S108 1.317 1.659 1.702 1.494 2.005 1.563 18 0.672 0.08 0.365 0.874S09 S109 1.442 1.863 1.909 1.574 2.123 1.767 18 0.672 0.08 0.365 0.874S10 S110 1.692 2.070 2.122 1.755 2.384 1.967 18 0.734 0.08 0.365 0.954S11 S111 1.942 2.273 2.329 1.835 2.506 2.157 18 0.739 0.08 0.365 0.961S12 S112 2.067 2.480 2.535 1.979 2.649 2.360 18 0.770 0.08 0.365 1.001S13 S113 2.192 2.683 2.739 2.090 2.761 2.548 18 0.802 0.08 0.365 1.043S14 S114 2.317 2.894 2.950 2.264 2.935 2.751 18 0.802 0.08 0.365 1.043S15 S115 2.442 3.090 3.155 2.286 3.074 2.933 12 0.905 0.12 0.365 1.177S16 S116 2.692 3.293 3.362 2.366 3.194 3.137 12 0.905 0.12 0.428 1.177S17 S117 2.942 3.497 3.566 2.476 3.302 3.340 12 0.936 0.12 0.428 1.217S18 S118 3.192 3.700 3.776 2.636 3.543 3.527 12 1.020 0.12 0.428 1.326S19 S119 3.317 3.904 3.982 2.750 3.692 3.730 12 1.051 0.12 0.428 1.367S20 S120 3.442 4.107 4.199 2.859 3.961 3.918 12 1.083 0.12 0.428 1.408S21 S121 3.692 4.314 4.412 2.977 4.157 4.122 12 1.083 0.12 0.428 1.408S22 S122 3.942 4.524 4.619 3.196 4.338 4.325 12 1.145 0.15 0.428 1.488S24 S124 4.192 4.937 5.035 3.456 4.638 4.716 12 1.176 0.15 0.428 1.529S26 S126 4.442 5.350 5.452 3.752 4.972 5.106 12 1.239 0.15 0.552 1.611S28 S128 4.942 5.757 5.869 3.971 5.313 5.497 12 1.301 0.15 0.740 1.692S30 S130 5.192 6.167 6.282 4.231 5.611 5.888 12 1.364 0.15 0.740 1.774S32 S132 5.442 6.584 6.696 4.568 5.910 6.284 8 1.520 0.15 0.740 1.976S34 S134 5.942 6.997 7.109 4.837 6.178 6.659 8 1.551 0.24 0.865 2.017S36 S136 6.442 7.404 7.522 5.028 6.446 7.066 8 1.583 0.24 0.865 2.058S38 S138 6.942 7.814 7.939 5.251 6.748 7.472 8 1.614 0.24 0.865 2.098S40 S140 7.192 8.221 8.355 5.474 7.085 7.847 8 1.676 0.24 0.990 2.179S44 S144 7.942 9.041 9.153 5.891 7.277 8.628 8 1.708 0.24 0.990 2.220S48 S148 8.942 9.878 9.994 6.628 8.099 9.422 6 1.989 0.30 1.125 0.500S52 S152 9.442 10.734 10.832 7.583 8.764 10.192 6 2.135 0.30 1.188 0.500

LENGTHL

MIN.

SHARP CORNER DIA.

AMIN.

SLOTSLEEVE THREADSADAPTER SLEEVE DIMENSIONS

SLEEVE NO.

10



S3000 SERIES FOR BEARING SERIES 230 S3100 SERIES FOR BEARING SERIES 231 S3200 SERIES FOR BEARING SERIES 232


SLEEVE NO. BORE DIA.MAJOR DIA WIDTH WIDTH DEPTH

d B F P TMAX. MAX. K1 M1 MIN. MIN. MIN.

S3000 S3100 S3200 S3000 S3100 S3200 S3000 S3100 S3200 S3000 S3100S3024 4.192 4.890 2.937 4.716 12 1.260 0.146 0.428 1.638S3026 4.442 5.304 3.227 5.106 12 1.323 0.146 0.552 1.720S3028 4.942 5.701 3.330 5.497 12 1.385 0.146 0.740 1.800S3030 5.192 6.105 3.482 5.888 12 1.416 0.146 0.740 1.892S3032 5.442 6.512 3.701 6.284 8 1.478 0.146 0.740 1.921S3034 5.942 6.929 4.009 6.659 8 1.510 0.240 0.865 1.963S3036 6.442 7.346 4.327 7.066 8 1.541 0.240 0.865 2.003S3038 6.942 7.744 4.402 7.472 8 1.604 0.240 0.865 2.085S3040 7.192 8.161 4.740 7.847 8 1.666 0.240 0.990 2.166S3044 7.942 8.976 5.120 8.628 8 1.760 0.240 0.990 2.288S3048 8.942 9.771 5.422 9.442 6 1.978 0.302 1.125 0.500S3052 9.444 10.600 6.009 10.192 6 2.135 0.302 1.188 0.500S3056 S3156 S3256 10.444 11.394 11.526 11.624 6.181 7.756 8.937 11.004 6 2.229 2.229 0.302 1.250 0.500S3060 S3160 S3260 10.944 12.221 12.359 12.464 6.717 8.370 9.630 11.785 6 2.291 2.291 0.302 1.375 0.500S3064 S3164 S3264 11.944 13.020 13.201 13.306 6.936 9.101 10.361 12.562 6 2.385 2.385 0.302 1.438 0.500S3068 S3168 S3268 12.444 13.847 14.034 14.146 7.533 9.777 11.116 13.303 5 2.541 2.541 0.302 1.500 0.500S3072 S3172 S3272 13.444 14.639 14.829 14.960 7.569 9.852 11.427 14.134 5 2.541 2.541 0.365 1.500 0.500S3076 S3176 S3276 13.944 15.430 15.623 15.774 7.733 10.056 11.867 14.921 5 2.666 2.666 0.365 1.500 0.500S3080 S3180 S3280 15.006 16.260 16.430 16.614 8.401 10.449 12.654 15.709 5 2.823 2.885 0.365 1.625 0.500S3084 S3184 S3284 15.756 17.056 17.298 17.456 8.488 11.402 13.292 16.496 5 2.823 2.948 0.365 1.625 0.500S3088 S3188 S3288 16.506 17.868 18.094 18.271 9.100 11.817 13.943 17.283 5 3.228 3.228 0.365 1.812 0.500S3092 S3192 S3292 17.006 18.675 18.928 19.111 9.336 12.368 14.573 18.071 5 3.228 3.323 0.365 1.812 0.500S3096 S3196 S3296 18.006 19.469 19.741 19.945 9.446 12.714 15.155 18.858 5 3.260 3.354 0.365 1.812 0.500

S30/500 S31/500 S32/500 18.506 20.263 20.581 20.817 9.838 13.657 16.491 19.646 5 3.573 3.666 0.365 1.812 0.500S30/530 S31/530 S32/530 19.506 21.507 21.793 22.065 10.579 14.004 17.271 20.827 4 3.573 3.666 0.490 1.812 0.500S30/560 S31/560 S32/560 21.006 22.721 23.000 23.279 11.222 14.569 17.915 22.008 4 3.823 3.916 0.490 1.812 0.500S30/600 S31/600 S32/600 22.006 24.316 24.644 24.933 11.451 15.388 18.853 23.583 4 3.916 3.916 0.490 1.812 0.500S30/630 S31/630 S32630 24.006 25.537 25.875 26.193 11.924 15.979 19.798 24.764 4 3.916 3.916 0.490 2.000 0.500S30/670 S31/670 S32/670 25.006 27.175 27.522 27.857 12.835 17.008 21.024 26.339 4 4.104 4.104 0.490 2.000 0.625S30/710 S31/710 S32/710 26.506 28.769 29.127 29.471 13.509 17.801 21.935 27.914 3 4.541 4.635 0.490 2.000 0.625S30/750 S31/750 S32/750 28.006 30.394 30.771 31.132 14.093 18.620 22.982 29.489 3 4.541 4.635 0.490 2.000 0.625S30/800 S31/800 29.506 32.389 32.772 14.408 19.014 31.457 3 4.541 4.635 0.490 2.000 0.625S30/850 S31/850 31.506 34.407 34.827 14.991 20.030 33.426 3 4.573 4.760 0.490 2.000 0.625S30/900 33.506 36.402 15.681 35.394 3 4.948 0.490 2.000 0.625S30/950 36.506 38.438 16.492 37.363 3 4.948 0.490 2.000 0.625

ADAPTER SLEEVE DIMENSIONS

INCHMAX.

NO. PER

MIN.

SHARP CORNER DIA.

AMIN.

THREADS SLOTSLEEVELENGTH

LTHD. LENGTH

G

11

METRIC ADAPTER SERIES ADAPTER SERIES H2, H3, H23, H30, H31, H32, H39 Adapter assemblies Metric Locknut Number For tapered bore assembly

METRIC ADAPTER SERIES

BEARING BEARING LOCKNUT LOCKING BEARINGBORE DIA. BORE DIA. NO. DEVICE NO. BORE DIA.

(mm) H2 H3 H23 H31 H32 H30 H3920 H204 H304 H2304 KM4 MB84 20 2025 H205 H305 H2305 KM5 MB85 25 2530 H206 H306 H2306 KM6 MB86 30 3035 H207 H307 H2307 KM7 MB87 35 3540 H208 H308 H2308 KM8 MB88 40 4045 H209 H309 H2309 KM9 MB9 45 4550 H210 H310 H2310 KM10 MB10 50 5055 H211 H311 H2311 KM11 MB11 55 5560 H212 H312 H2312 KM12 MB12 60 6065 H213 H313 H2313 KM13 MB13 65 6570 H214 H314 H2314 KM14 MB14 70 7075 H215 H315 H2315 KM15 MB15 75 7580 H216 H316 H2316 KM16 MB16 80 8085 H217 H317 H2317 KM17 MB17 85 8590 H218 H318 H2318 KM18 MB18 90 9095 H219 H319 H2319 KM19 MB19 95 95

100 H220 H320 H2320 H3120 KM20 MB20 100 100105 H221 H321 H2321 KM21 MB21 105 105110 H222 H322 H2322 H3122 KM22 MB22 110 110120 H2324 H3124 KM24 MB24 120 H3024 H3924 KML24 MBL24 120130 H2326 H3126 KM26 MB26 130 H3026 H3926 KML26 MBL26 130140 H2328 H3128 KM28 MB28 140 H3028 H3928 KML28 MBL28 140150 H2330 H3130 KM30 MB30 150 H3030 H3930 KML30 MBL30 150160 H2332 H3132 KM32 MB32 160 H3032 H3932 KML32 MBL32 160170 H2334 H3134 KM34 MB34 170 H3034 H3934 KML34 MBL34 170180 H2336 H3136 KM36 MB36 180 H3036 H3936 KML36 MBL36 180190 H2338 H3138 KM38 MB38 190 H3038 H3938 KML38 MBL38 190200 H2340 H3140 KM40 MB40 200 H3040 H3940 KML40 MBL40 200220 H2344 H3144 HM44T MB44 220 H3044 H3944 HM3044 MS3044 220240 H2348 H3148 HM48T MB48 240 H3048 H3948 HM3048 MS3048 240260 H2352 H3152 HM52T MB52 260 H3052 H3952 HM3052 MS3052 260280 H2356 H3156 HM56T MB56 280 H3056 H3956 HM3056 MS3056 280300 H3160 H3260 HM3160 MS3160 300 H3060 H3960 HM3060 MS3060 300320 H3164 H3264 HM3164 MS3164 320 H3064 H3964 HM3064 MS3064 320340 H3168 H3268 HM3168 MS3168 340 H3068 H3968 HM3068 MS3068 340360 H3172 H3272 HM3172 MS3172 360 H3072 H3972 HM3072 MS3072 360380 H3176 H3276 HM3176 MS3176 380 H3076 H3976 HM3076 MS3076 380400 H3180 H3280 HM3180 MS3180 400 H3080 H3980 HM3080 MS3080 400420 H3184 H3284 HM3184 MS3184 420 H3084 H3984 HM3084 MS3084 420440 H3188 H3288 HM3188 MS3188 440 H3088 H3988 HM3088 MS3088 440460 H3192 H3292 HM3192 MS3192 460 H3092 H3992 HM3092 MS3092 460480 H3196 H3296 HM3196 MS3196 480 H3096 H3996 HM3096 MS3096 480500 H31/500 H32/500 HM31/500 MS31/500 500 H30/500 H39/500 HM30/500 MS30/500 500

ADAPTER SERIES LOCKNUT ADAPTER SERIESADAPTER DIMENSIONS

NO.

12

METRIC SLEEVE SERIES ADAPTER SERIES H2, H3


METRIC SLEEVE SERIES

SLEEVE NO. BORE DIA. SHARP SLEEVECORNER DIA. LENGTH METRIC THD. LENGTH WIDTH WIDTH DEPTH

d A L THREADS G F P TNOM. MIN. MAX. MIN. MIN. MIN. MIN.

H204 0.669 0.843 0.945 M20 X 1 0.433 0.059 0.197 0.512H205 0.787 1.043 1.024 M25 X 1.5 0.512 0.079 0.236 0.630H206 0.984 1.240 1.063 M30 X 1.5 0.512 0.079 0.236 0.630H207 1.181 1.441 1.142 M35 X 1.5 0.551 0.079 0.276 0.669H208 1.378 1.642 1.220 M40 X 1.5 0.591 0.079 0.276 0.709H209 1.575 1.843 1.299 M45 X 1.5 0.630 0.079 0.276 0.748H210 1.772 2.043 1.378 M50 X 1.5 0.669 0.079 0.276 0.787H211 1.968 2.244 1.457 M55 X 2 0.709 0.098 0.354 0.827H212 2.165 2.445 1.496 M60 X 2 0.709 0.098 0.354 0.827H213 2.362 2.646 1.575 M65 X 2 0.748 0.098 0.354 0.866H214 2.362 2.846 1.614 M70 X 2 0.787 0.098 0.354 0.945H215 2.559 3.047 1.693 M75 X 2 0.827 0.118 0.354 0.984H216 2.756 3.244 1.811 M80 X 2 0.906 0.118 0.433 1.063H217 2.953 3.453 1.968 M85 X 2 0.984 0.118 0.433 1.142H218 3.150 3.654 2.047 M90 X 2 0.984 0.118 0.433 1.142H219 3.346 3.858 2.165 M95 X 2 1.024 0.118 0.433 1.181H220 3.543 4.063 2.283 M100 X 2 1.063 0.118 0.512 1.220H221 3.740 4.264 2.362 M105 X 2 1.063 0.118 0.512 1.220H222 3.937 4.468 2.480 M110 X 2 1.102 0.118 0.512 1.260



H304 0.669 0.858 1.102 M20 X 1 0.433 0.059 0.197 0.512H305 0.787 1.051 1.142 M25 X 1.5 0.512 0.079 0.236 0.630H306 0.984 1.256 1.220 M30 X 1.5 0.512 0.079 0.236 0.630H307 1.181 1.461 1.378 M35 X 1.5 0.551 0.079 0.276 0.669H308 1.378 1.657 1.417 M40 X 1.5 0.591 0.079 0.276 0.709H309 1.575 1.862 1.535 M45 X 1.5 0.630 0.079 0.276 0.748H310 1.772 2.067 1.654 M50 X 1.5 0.669 0.079 0.276 0.787H311 1.968 2.272 1.772 M55 X 2 0.709 0.098 0.354 0.827H312 2.165 2.476 1.850 M60 X 2 0.709 0.098 0.354 0.827H313 2.362 2.677 1.968 M65 X 2 0.748 0.098 0.354 0.866H314 2.362 2.882 2.047 M70 X 2 0.787 0.098 0.354 0.945H315 2.559 3.087 2.165 M75 X 2 0.827 0.118 0.354 0.984H316 2.756 3.287 2.323 M80 X 2 0.906 0.118 0.433 1.063H317 2.953 3.496 2.480 M85 X 2 0.984 0.118 0.433 1.142H318 3.150 3.697 2.559 M90 X 2 0.984 0.118 0.433 1.142H319 3.346 3.902 2.677 M95 X 2 1.024 0.118 0.433 1.181H320 3.543 4.102 2.795 M100 X 2 1.063 0.118 0.512 1.220H321 3.740 4.311 2.913 M105 X 2 1.063 0.118 0.512 1.220H322 3.937 4.516 3.031 M110 X 2 1.102 0.118 0.512 1.260

THREADS SLOTSERIES H2 METRIC ADAPTER SLEEVE DIMENSIONS

THREADS SLOTSERIES H3 METRIC ADAPTER SLEEVE DIMENSIONS

13

METRIC SLEEVE SERIES ADAPTER SERIES H30 For tapered bore assembly




H3024 4.331 4.890 2.835 M120 X 2 1.142 0.197 0.591 1.339H3026 4.528 5.307 3.150 M130 X 2 1.220 0.197 0.591 1.417H3028 4.921 5.701 3.228 M140 X 2 1.260 0.197 0.669 1.457H3030 5.315 6.106 3.425 M150 X 2 1.339 0.197 0.669 1.535H3032 5.512 6.516 3.661 M160 X 3 1.417 0.236 0.748 1.654H3034 5.906 6.929 3.976 M170 X 3 1.457 0.236 0.748 1.693H3036 6.299 7.346 4.291 M180 X 3 1.496 0.236 0.827 1.732H3038 6.693 7.748 4.409 M190 X 3 1.575 0.236 0.827 1.811H3040 7.087 8.165 4.724 M200 X 3 1.614 0.236 0.827 1.850H3044 7.874 8.976 4.961 TR220 X 4 1.535 0.197 0.787 0.827H3048 8.661 9.772 5.236 TR240 X 4 1.693 0.315 0.787 0.827H3052 9.449 10.598 5.709 TR260 X 4 1.732 0.315 0.787 0.866H3056 10.236 11.398 5.984 TR280 X 4 1.890 0.315 0.945 0.866H3060 11.024 12.224 6.614 TR300 X 4 2.047 0.315 0.945 0.866H3064 11.811 13.024 6.732 TR320 X 5 2.037 0.315 0.945 0.984H3068 12.598 13.850 7.362 TR340 X 5 2.205 0.315 0.945 1.024H3072 13.386 14.642 7.402 TR360 X 5 2.205 0.394 1.102 1.024H3076 14.173 15.437 7.598 TR380 X 5 2.362 0.394 1.102 1.024H3080 14.961 16.268 8.268 TR400 X 5 2.520 0.394 1.102 1.063H3084 15.478 17.059 8.346 TR420 X 5 2.520 0.394 1.260 1.063H3088 16.142 17.874 8.976 TR440 X 5 2.874 0.394 1.260 1.063H3092 16.929 18.681 9.213 TR460 X 5 2.874 0.394 1.260 1.102H3096 17.717 19.480 9.331 TR480 X 5 2.874 0.394 1.417 1.102

H30/500 18.504 20.272 9.724 TR500 X 5 3.189 0.394 1.417 1.102

SERIES H30 METRIC ADAPTER SLEEVE DIMENSIONSTHREADS SLOT

14

METRIC SLEEVE SERIES ADAPTER SERIES H31, H32




H3120 3.543 4.122 2.992 M100 X 2 1.063 0.118 0.512 1.220H3122 3.937 4.528 3.189 M110 X 2 1.102 0.118 0.512 1.260H3124 4.331 4.941 3.465 M120 X 2 1.142 0.197 0.591 1.339H3126 4.528 5.346 3.622 M130 X 2 1.220 0.197 0.591 1.417H3128 4.921 5.752 3.819 M140 X 2 1.260 0.197 0.669 1.457H3130 5.315 6.185 4.370 M150 X 2 1.339 0.197 0.669 1.535H3132 5.512 6.598 4.685 M160 X 3 1.417 0.236 0.748 1.654H3134 5.906 7.000 4.803 M170 X 3 1.457 0.236 0.748 1.693H3136 6.299 7.421 5.157 M180 X 3 1.496 0.236 0.827 1.732H3138 6.693 7.843 5.551 M190 X 3 1.575 0.236 0.827 1.811H3140 7.087 8.264 5.906 M200 X 3 1.614 0.236 0.827 1.850H3144 7.874 9.075 6.339 TR220 X 4 1.732 0.236 0.984 2.008H3148 8.661 9.890 6.772 TR240 X 4 1.811 0.236 0.984 2.087H3152 9.449 10.732 7.480 TR260 X 4 1.929 0.315 1.142 2.205H3156 10.236 11.528 7.677 TR280 X 4 2.008 0.315 1.142 2.283H3160 11.024 12.362 8.189 TR300 X 4 1.968 0.315 0.945 0.866H3164 11.811 13.201 8.898 TR320 X 5 2.087 0.315 0.945 0.984H3168 12.598 14.039 10.000 TR340 X 5 2.598 0.315 1.102 1.024H3172 13.386 14.831 10.197 TR360 X 5 2.717 0.394 1.102 1.024H3176 14.173 15.630 10.394 TR380 X 5 2.835 0.394 1.260 1.024H3180 14.961 16.437 10.709 TR400 X 5 2.913 0.394 1.260 1.063H3184 15.748 17.303 11.968 TR420 X 5 3.228 0.394 1.260 1.063H3188 16.142 18.098 12.087 TR440 X 5 3.268 0.394 1.417 1.063H3192 16.929 19.287 12.835 TR460 X 5 3.465 0.394 1.417 1.102H3196 17.717 19.752 13.189 TR480 X 5 3.465 0.394 1.417 1.102

H31/500 18.504 20.591 14.016 TR500 X 5 3.661 0.394 1.575 1.102H3260 11.024 12.469 9.449 TR300 X 4 1.968 0.315 0.945 0.866H3264 11.811 13.307 10.157 TR320 X 5 2.087 0.315 0.945 0.984H3268 12.598 14.150 11.339 TR340 X 5 2.598 0.315 1.102 1.024H3272 13.386 14.965 11.772 TR360 X 5 2.717 0.394 1.102 1.024H3276 14.173 15.780 12.205 TR380 X 5 2.835 0.394 1.260 1.024H3280 14.961 16.622 12.913 TR400 X 5 2.913 0.394 1.260 1.063H3284 15.748 17.461 13.858 TR420 X 5 3.228 0.394 1.260 1.063H3288 16.142 18.280 14.213 TR440 X 5 3.268 0.394 1.417 1.063H3292 16.929 19.118 15.039 TR460 X 5 3.465 0.394 1.417 1.102H3296 17.717 19.953 15.630 TR480 X 5 3.465 0.394 1.417 1.102

H32/500 18.504 20.472 16.850 TR500 X 5 3.661 0.394 1.575 1.102

THREADS SLOTSERIES H31 and H32 METRIC ADAPTER SLEEVE DIMENSIONS


15

METRIC SLEEVE SERIES ADAPTER SERIES H23, H39 For tapered bore assembly




H2304 0.669 0.866 1.220 M20 X 1 0.433 0.059 0.197 0.512H2305 0.787 1.071 1.378 M25 X 1.5 0.512 0.079 0.236 0.630H2306 0.984 1.280 1.496 M30 X 1.5 0.512 0.079 0.236 0.630H2307 1.181 1.488 1.693 M35 X 1.5 0.551 0.079 0.276 0.669H2308 1.378 1.693 1.811 M40 X 1.5 0.591 0.079 0.276 0.709H2309 1.575 1.898 1.968 M45 X 1.5 0.630 0.079 0.276 0.748H2310 1.772 2.106 2.165 M50 X 1.5 0.669 0.079 0.276 0.787H2311 1.968 2.319 2.323 M55 X 2 0.709 0.098 0.354 0.827H2312 2.165 2.524 2.441 M60 X 2 0.709 0.098 0.354 0.827H2313 2.362 2.728 2.559 M65 X 2 0.748 0.098 0.354 0.866H2314 2.362 2.933 2.677 M70 X 2 0.787 0.098 0.354 0.945H2315 2.559 3.146 2.874 M75 X 2 0.827 0.118 0.354 0.984H2316 2.756 3.350 3.071 M80 X 2 0.906 0.118 0.433 1.063H2317 2.953 3.555 3.228 M85 X 2 0.984 0.118 0.433 1.142H2318 3.150 3.768 3.386 M90 X 2 0.984 0.118 0.433 1.142H2319 3.346 3.972 3.543 M95 X 2 1.024 0.118 0.433 1.181H2320 3.543 4.189 3.819 M100 X 2 1.063 0.118 0.512 1.220H2321 3.740 4.402 3.976 M105 X 2 1.063 0.118 0.512 1.220H2322 3.937 4.606 4.134 M110 X 2 1.102 0.118 0.512 1.260H2324 4.331 5.020 4.409 M120 X 2 1.142 0.197 0.591 1.339H2326 4.528 5.441 4.764 M130 X 2 1.220 0.197 0.591 1.417H2328 4.921 5.862 5.157 M140 X 2 1.260 0.197 0.669 1.457H2330 5.315 6.276 5.472 M150 X 2 1.339 0.197 0.669 1.535H2332 5.512 6.693 5.787 M160 X 3 1.417 0.236 0.748 1.654H2334 5.906 7.106 6.063 M170 X 3 1.457 0.236 0.748 1.693H2336 6.299 7.520 6.339 M180 X 3 1.496 0.236 0.827 1.732H2338 6.693 7.933 6.654 M190 X 3 1.575 0.236 0.827 1.811H2340 7.087 8.346 6.929 M200 X 3 1.614 0.236 0.827 1.850H2344 7.874 9.157 7.323 TR220 X 4 1.732 0.236 0.984 2.008H2348 8.661 9.980 7.835 TR240 X 4 1.811 0.236 0.984 2.087H2352 9.449 10.799 8.307 TR260 X 4 1.929 0.315 1.142 2.205H2356 10.236 11.626 8.819 TR280 X 4 2.008 0.315 1.142 2.283



H3924 4.331 4.850 2.362 M120 X 2 1.142 0.197 0.591 1.339H3926 4.528 5.256 2.559 M130 X 2 1.220 0.197 0.591 1.417H3928 4.921 5.650 2.598 M140 X 2 1.260 0.197 0.669 1.457H3930 5.315 6.071 2.992 M150 X 2 1.339 0.197 0.669 1.535H3932 5.512 6.465 3.071 M160 X 3 1.417 0.236 0.748 1.654H3934 5.906 6.858 3.110 M170 X 3 1.457 0.236 0.748 1.693H3936 6.299 7.276 3.425 M180 X 3 1.496 0.236 0.827 1.732H3938 6.693 7.673 3.504 M190 X 3 1.575 0.236 0.827 1.811H3940 7.087 8.091 3.858 M200 X 3 1.614 0.236 0.827 1.850H3944 7.874 8.878 3.780 TR220 X 4 1.535 0.197 0.787 0.827H3948 8.661 9.669 3.976 TR240 X 4 1.693 0.315 0.787 0.827H3952 9.449 10.504 4.567 TR260 X 4 1.732 0.315 0.787 0.866H3956 10.236 11.295 4.764 TR280 X 4 1.890 0.315 0.945 0.866H3960 11.024 12.134 5.515 TR300 X 4 2.047 0.315 0.945 0.866H3964 11.811 12.921 5.512 TR320 X 5 2.087 0.315 0.945 0.984H3968 12.598 13.709 5.669 TR340 X 5 2.205 0.315 0.945 1.024H3972 13.386 14.496 5.669 TR360 X 5 2.205 0.394 1.102 1.024H3976 14.173 15.343 6.457 TR380 X 5 2.362 0.394 1.102 1.024H3980 14.960 16.130 6.614 TR400 X 5 2.520 0.394 1.102 1.063H3984 15.748 16.917 6.614 TR420 X 5 2.520 0.394 1.260 1.063H3988 16.142 17.744 7.441 TR440 X 5 2.874 0.394 1.260 1.063H3992 16.929 18.531 7.441 TR460 X 5 2.874 0.394 1.260 1.102H3996 17.717 19.358 7.874 TR480 X 5 2.874 0.394 1.417 1.102

H39/500 18.504 20.146 8.189 TR500 X 5 3.189 0.394 1.417 1.102

SLOTSERIES H39 METRIC ADAPTER SLEEVE DIMENSIONS

SERIES H23 METRIC ADAPTER SLEEVE DIMENSIONSTHREADS SLOT

THREADS

16

SK & ASK SERIES WITHDRAWAL SLEEVE DIMENSIONS Inch design and corresponding Removal nut or locknut

WITHDRAWAL SLEEVES

BEARING SLEEVE BORE

SLOT LOCKNUT LOCKWASHER

REMOVAL

BORE DIA. NO. PER MAJOR WIDTH NUTINCH DIA.

d B F MAX. K1 MAX. MIN.

-00 -000 -00 -000 -00 -000 -00 -000 -00 -000

SK-8 SK-108 0.16 0.25 1.5748 1.3792 1.585 1.585 1.181 1.575 18 1.767 0.236 0.276 0.052 N07 W07 N09 SK-9 SK-109 0.22 0.31 1.7717 1.576 1.781 1.782 1.26 1.732 18 1.967 0.236 0.276 0.052 N08 W08 N10 SK-10 SK-110 0.25 0.47 1.9685 1.7729 1.978 1.978 1.378 1.968 18 2.204 0.276 0.315 0.052 N09 W09 RN10 SK-11 SK-111 0.31 0.56 2.1654 1.9697 2.175 2.175 1.457 2.126 18 2.407 0.276 0.354 0.052 N10 W10 RN11 SK-12 SK-112 0.41 0.69 2.3622 2.1669 2.372 2.372 1.575 2.244 18 2.626 0.295 0.394 0.052 N11 W11 RN12 ASK-13 ASK-113 0.50 0.84 2.5591 2.3637 2.569 2.569 1.654 2.402 12 2.933 0.295 0.433 0.084 N12 W12 AN15 ASK-14 ASK-114 0.94 1.55 2.7559 2.3637 2.769 2.769 1.732 2.559 12 3.137 0.295 0.472 0.084 N12 W12 AN16 ASK-15 ASK-115 1.25 1.80 2.9528 2.5605 2.966 2.966 1.85 2.717 12 3.34 0.315 0.472 0.084 N13 W13 AN17 ASK-16 ASK-116 1.25 2.00 3.1496 2.7574 3.163 3.163 1.969 2.835 12 3.527 0.354 0.472 0.084 N14 W14 AN18 ASK-17 ASK-117 1.45 2.25 3.3465 2.9543 3.359 3.359 2.047 2.953 12 3.73 0.354 0.512 0.084 AN15 W15 AN19 ASK-18 ASK-118 1.55 2.55 3.5433 3.1511 3.556 3.556 2.087 3.15 12 3.918 0.354 0.551 0.084 AN16 W16 AN20 ASK-19 ASK-119 1.80 2.95 3.7402 3.3482 3.753 3.753 2.244 3.346 12 4.122 0.399 0.591 0.084 AN17 W17 AN21 ASK-20 ASK-120 2.00 3.40 3.937 3.545 3.95 3.95 2.323 3.543 12 4.325 0.413 0.591 0.115 AN18 W18 AN22 ASK-22 ASK-122 2.45 4.25 4.3307 3.9387 4.344 4.344 2.559 3.858 12 4.778 0.433 0.63 0.115 AN20 W20 ARN22 ASK-24 ASK-124 3.15 5.00 4.7244 4.3324 4.737 4.738 2.835 4.134 12 5.185 0.472 0.669 0.115 AN22 W22 ARN24 ASK-26 ASK-126 5.00 8.00 5.1181 4.5293 5.131 5.131 3.071 4.528 12 5.622 0.472 0.748 0.115 AN22 W22 ARN26 SK-28 SK-128 5.90 9.50 5.5118 4.9233 5.528 5.528 3.228 4.921 8 6.097 0.512 0.787 0.115 AN24 W24 RN28 SK-30 SK-130 6.80 11.50 5.9055 5.317 5.922 5.922 3.465 5.315 8 6.503 0.551 0.945 0.115 AN26 W26 RN30 SK-32 SK-132 9.95 15.30 6.2992 5.5138 6.316 6.319 3.78 5.512 8 6.925 0.551 0.945 0.178 AN28 W28 RN32 SK-34 SK-134 11.50 17.50 6.6929 5.9075 6.704 6.713 4.094 5.748 8 7.331 0.63 0.945 0.178 AN30 W30 RN34 SK-36 SK-136 12.50 20.50 7.0866 6.3012 7.103 7.106 4.094 6.063 8 7.753 0.63 1.024 0.178 AN32 W32 RN36 SK-38 SK-138 14.50 22.00 7.4803 6.6949 7.497 7.503 4.409 6.299 8 8.191 0.709 1.024 0.178 AN34 W34 RN38 SK-40 SK-140 16.50 25.50 7.874 7.0886 7.89 7.897 4.646 6.693 8 8.628 0.709 1.181 0.178 AN36 W36 N44 SK-44 SK-144 19.50 29.50 8.6614 7.8762 8.681 8.688 5.118 7.126 6 9.442 0.709 1.181 0.178 AN40 W40 N048 SK-48 SK-148 24.50 34.00 9.4488 8.6636 9.469 9.475 5.669 7.441 6 10.192 0.787 1.181 0.178 N44 W44 N052 SK-52 SK-152 30.90 40.75 10.2362 9.451 10.256 10.262 6.102 7.874 6 11.004 0.787 1.181 0.178 N048 P48 N056 SK-56 SK-156 33.10 48.50 11.0236 10.2388 11.05 11.05 6.102 8.268 6 11.973 0.787 1.181 0.302 N052 P52 RN56 SK-60 39.20 11.811 11.0262 11.837 6.693 6 12.942 0.984 0.302 N056 P56 RN60 SK-64 46.30 12.5981 11.8136 12.631 7.087 6 13.723 0.984 0.302 N060 P60 RN64

GNOM.

THD. LGTH.

AREF.

LENGTH THREADS

LMAX.

SLEEVE SHARP

CORNER DIA.

WITHDRAWAL SLEEVEWITHDRAWAL SLEEVE DIMENSIONS

APP. WT.

(LB.)

NO.

18

AH SERIES METRIC WITHDRAWAL SLEEVES

Metric Design and corresponding Removal nut or locknut

WITHDRAWAL SLEEVES

BEARING SHAFTBORE DIA. SLEEVE REMOVAL SLEEVE REMOVAL SLEEVE REMOVAL SLEEVE REMOVAL SLEEVE REMOVAL SLEEVE REMOVAL SLEEVE REMOVAL SLEEVE REMOVALDIA. NO. NUT NO. NUT NO. NUT NO. NUT NO. NUT NO. NUT NO. NUT NO. NUT40 35 AH208 KM9 AH308 KM9 AH2308 KM945 40 AH209 KM10 AH309 KM10 AH2309 KM1050 45 AH210 KM11 AH310 KM11 AH2310 KM1155 50 AH211 KM12 AH311 KM12 AH2311 KM1260 55 AH212 KM13 AH312 KM13 AH2312 KM1365 60 AH213 KM15 AH313 KM15 AH2313 KM1570 65 AH214 KM16 AH314 KM16 AH2314 KM1675 70 AH215 KM17 AH315 KM17 AH2315 KM1780 75 AH216 KM18 AH316 KM18 AH2316 KM1885 80 AH217 KM19 AH317 KM19 AH2317 KM1990 85 AH218 KM20 AH318 KM20 AH2318 KM20 AH3218 KM2095 90 AH219 KM21 AH319 KM21 AH2319 KM21 AH3219 KM21100 95 AH220 KM22 AH320 KM22 AH2320 KM22 AH3120 KM22 AH3220 KM22110 105 AH222 KM24 AH322 KM24 AH2322 KM25 AH3122 KM24 AH3222 KM25120 115 AH224 KM26 AH324 KM26 AH2324 KM27 AH3124 KM26 AH3224 KM27 AH3024 KM26130 125 AH226 KM28 AH326 KM28 AH2326 KM29 AH3126 KM28 AH3226 KM29 AH3026 KM28140 135 AH228 KM30 AH328 KM30 AH2328 KM31 AH3128 KM30 AH3228 KM31 AH3028 KM30150 145 AH230 KM32 AH330 KM33 AH2330 KM33 AH3130 KM33 AH3230 KM33 AH3030 KM32160 150 AH232 KM34 AH332 KM36 AH232 KM36 AH3132 KM36 AH3232 KM36 AH3032 KM34170 160 AH234 KM36 AH334 KM38 AH2334 KM39 AH3134 KM38 AH3234 KM38 AH3034 KM36 AH3934 HMLL36180 170 AH236 KM38 AH2336 KM40 AH3136 KM40 AH3236 KM40 AH3036 KM38 AH2236 KM40 AH3936 HMLL38190 180 AH238 HML41T AH2338 HM42T AH3138 HM42T AH3238 HM42T AH3038 HML41T AH2238 HM42T AH3938 HMLL40200 190 AH240 HML43T AH2340 HM44T AH3140 HM44T AH3240 HM44T AH3040 HML43T AH2240 HM44T AH3940 HMLL42T220 200 AH244 HML47T AH2344 HM48T AH3144 HM48T AH3044 HML47T AH2244 HM48T AH3944 HMLL46T240 220 AH248 HML52T AH2348 HM52T AH3148 HM52T AH3048 HML52T AH2248 HM52T AH3948 HMLL50T260 240 AH252 HML56T AH2352 HM58T AH3152 HM58T AH3052 HML56T AH2252 HM58T AH3952 HML55T280 260 AH256 HML60T AH2356 HM62T AH3156 HM62T AH3056 HML60T AH2256 HM62T AH3956 HML59T300 280 AH3160 HM66T AH3260 HM66T AH3060 HML64T AH2260 HM66T AH3960 HML63T320 300 AH3164 HM70T AH3264 HM70T AH3064 HML69T AH2264 HM70T AH3964 HML67T340 320 AH3168 HM74T AH3268 HM74T AH3068 HML73T AH3968 HML71T360 340 AH3172 HM80T AH3272 HM80T AH3072 HML77T AH3972 HMLL75T380 360 AH3176 HM84T AH3276 HM84T AH3076 HML82T AH3976 HMLL79T400 380 AH3180 HM88T AH3280 HM88T AH3080 HML86T AH3980 HMLL83T420 400 AH3184 HM92T AH3284 HM92T AH3084 HML90T AH3984 HMLL87T440 420 AH3188 HM96T AH3288 HM96T AH3088 HML94T AH3988 HMLL92T460 440 AH3192 HM102T AH3292 HM102T AH3092 HML98T AH3992 HMLL96T480 460 AH3196 HM106T AH3296 HM106T AH3096 HML104T AH3996 HMLL100T500 480 AH31/500 HM110T AH32/500 HM110T AH30/500 HML108T AH39/500 HMLL104T

AH39WITHDRAWAL SLEEVE DIMENSIONS

AH31 AH32 AH30 AH22AH2 AH3 AH23

19

RN REMOVAL NUT SERIES RN AND ARN SERIES Inch design/Ball, cylindrical, spherical and tapered roller bearings

REMOVAL NUT SERIES

Notes: Metric HM-T, HML-T, and HMLL-T Series Removal Nuts are also available

LOCKNUT OUTSIDE FACE NUT CHAMFER NO. MAJOR DIA. NO. PER INCH DIA. DIA. WIDTH WIDTH DEPTH DEPTH

d C E D G H D1

NOM. K1 MAX. MAX. MAX. MIN. MAX. MAX. RN08 1.767 18 2.827 2.072 0.385 0.490 0.151 0.070RN09 1.967 18 2.984 2.291 0.448 0.490 0.151 0.070RN10 2.204 18 3.062 2.562 0.594 0.240 0.135 0.078RN11 2.407 18 3.281 2.812 0.594 0.240 0.135 0.078RN12 2.626 18 3.500 3.062 0.656 0.240 0.135 0.078ARN22 4.778 12 6.312 5.375 0.781 0.610 0.260 0.141ARN24 5.185 12 6.938 5.625 0.844 0.610 0.291 0.141ARN26 5.622 12 7.312 6.062 0.906 0.610 0.291 0.141RN28 6.097 8 7.938 6.563 0.969 0.610 0.291 0.141RN30 6.503 8 8.312 7.062 1.031 0.735 0.323 0.141RN32 6.925 8 8.938 7.562 1.031 0.735 0.323 0.141RN34 7.331 8 9.312 8.062 1.094 0.860 0.385 0.141RN36 7.753 8 9.875 8.563 1.094 0.860 0.385 0.141RN38 8.191 8 10.688 9.125 1.156 0.860 0.385 0.141RN56 11.973 6 15.188 13.562 1.468 1.230 0.510 0.203RN60 12.942 6 16.397 13.635 1.676 3.510 0.698 0.200RN64 13.723 6 17.015 15.010 1.760 3.510 0.698 0.200RN68 14.345 5-ACME 17.515 15.760 1.760 3.885 0.760 0.200RN72 14.957 5-ACME 18.515 16.135 1.760 3.885 0.760 0.200RN76 15.988 5-ACME 19.640 17.635 1.760 3.885 0.760 0.200RN80 17.319 5-ACME 21.140 18.010 1.885 3.885 0.760 0.260RN84 18.107 5-ACME 22.390 18.760 2.010 4.010 0.885 0.260RN88 18.894 5-ACME 23.640 19.635 2.135 4.010 0.885 0.260RN92 19.682 5-ACME 25.140 20.510 2.260 4.010 0.885 0.260RN96 20.867 4-ACME 26.390 21.260 2.385 4.010 0.885 0.260

THREADS SLOTREMOVAL NUT DIMENSIONS

22

N-00 SERIES LOCKNUT DIMENSIONS Inch dimensions for ball, roller, spherical and tapered roller bearings Standard Locknut Series

N-00 SERIES LOCKNUTS

NOTES: Available in left hand thread (NL series), in stainless steel (NS series), or plated. AN15-AN40 are available with 11 threads per in (N series). K1 threads—American National Form NS Class 3.

LOCKNUT OUTSIDE FACE NUT SLOT SLOT FACE APP. WT.NO. MAJOR DIA. NO. PER INCH DIA. DIA. WIDTH WIDTH DEPTH RUNOUT (LB./C)

d C E D G H Sd

MIN. K1 MAX. MAX. MAX. MAX. MAX. MAX.N-00 0.391 32 0.755 0.625 0.229 0.120 0.073 0.002 2.0N-01 0.469 32 0.880 0.719 0.323 0.120 0.073 0.002 3.3N-02 0.586 32 1.005 0.813 0.323 0.120 0.104 0.002 3.5N-03 0.664 32 1.130 0.938 0.354 0.120 0.104 0.002 5.3N-04 0.781 32 1.380 1.125 0.385 0.178 0.104 0.002 9.0N-05 0.969 32 1.568 1.281 0.416 0.178 0.104 0.002 11.5N-06 1.173 18 1.755 1.500 0.416 0.178 0.104 0.002 13.0N-07 1.376 18 2.068 1.813 0.448 0.178 0.104 0.004 21.0N-08 1.563 18 2.255 2.000 0.448 0.240 0.104 0.004 22.5N-09 1.767 18 2.536 2.281 0.448 0.240 0.104 0.004 29.0N-10 1.967 18 2.693 2.438 0.510 0.240 0.104 0.004 34.0N-11 2.175 18 2.974 2.656 0.510 0.240 0.135 0.004 42.0N-12 2.360 18 3.161 2.844 0.541 0.240 0.135 0.004 47.0N-13 2.548 18 3.380 3.063 0.573 0.240 0.135 0.004 55.0N-14 2.751 18 3.630 3.313 0.573 0.240 0.135 0.004 63.8AN-15 2.933 12 3.880 3.563 0.604 0.360 0.135 0.004 78.8AN-16 3.137 12 4.161 3.844 0.604 0.360 0.135 0.004 92.5AN-17 3.340 12 4.411 4.031 0.635 0.360 0.166 0.004 104.0AN-18 3.527 12 4.661 4.281 0.698 0.360 0.166 0.004 130.0AN-19 3.730 12 4.943 4.563 0.729 0.360 0.166 0.004 153.8AN-20 3.918 12 5.193 4.813 0.760 0.360 0.166 0.004 178.8AN-21 4.122 12 5.443 5.000 0.760 0.485 0.198 0.004 193.8AN-22 4.325 12 5.724 5.281 0.791 0.485 0.198 0.004 223.0AN-24 4.716 12 6.130 5.688 0.823 0.485 0.198 0.006 255.0AN-26 5.106 12 6.755 6.188 0.885 0.610 0.260 0.006 317.0AN-28 5.497 12 7.099 6.531 0.948 0.610 0.260 0.006 355.0AN-30 5.888 12 7.693 7.063 0.979 0.610 0.291 0.006 475.0AN-32 6.284 8 8.068 7.438 1.041 0.610 0.291 0.006 525.0AN-34 6.659 8 8.661 8.031 1.073 0.610 0.291 0.006 662.5AN-36 7.066 8 9.068 8.375 1.104 0.735 0.323 0.006 665.0AN-38 7.472 8 9.474 8.781 1.135 0.735 0.323 0.006 775.0AN-40 7.847 8 9.849 9.156 1.198 0.735 0.323 0.006 850.0N-44 8.628 8 11.005 9.843 1.260 0.980 0.510 0.006 1050.0

LOCKNUT DIMENSIONSTHREADS

24

N-00 SERIES SHAFT DIMENSIONS

Inch dimensions for ball, roller, spherical and tapered roller bearings

N-00 SERIES SHAFTS

NOTES: K1 threads—American National Form NS Class 3.

LOCKNUT BEARINGNO. BORE NO. PER MAJOR PITCH MINOR LENGTH DIA. WIDTH DEPTH WIDTH

INCH DIA. DIA. DIA.V2 L A W H S M

MAX. K1 MAX. MAX. MAX. MAX. MAX. MAX. MIN. MIN. MIN.N-00 0.394 0.312 32 0.391 0.371 0.353 0.297 0.342 0.078 0.062 0.125 0.094N-01 0.472 0.406 32 0.469 0.449 0.431 0.391 0.420 0.078 0.062 0.125 0.094N-02 0.591 0.500 32 0.586 0.566 0.548 0.391 0.537 0.078 0.078 0.125 0.094N-03 0.669 0.562 32 0.664 0.644 0.626 0.422 0.615 0.078 0.078 0.125 0.094N-04 0.787 0.719 32 0.781 0.761 0.743 0.453 0.732 0.078 0.078 0.188 0.094N-05 0.984 0.875 32 0.969 0.949 0.931 0.484 0.920 0.078 0.094 0.188 0.125N-06 1.181 1.062 18 1.173 1.137 1.105 0.484 1.094 0.109 0.094 0.188 0.125N-07 1.378 1.250 18 1.376 1.340 1.308 0.516 1.297 0.109 0.094 0.188 0.125N-08 1.575 1.469 18 1.563 1.527 1.495 0.547 1.484 0.109 0.094 0.312 0.125N-09 1.772 1.688 18 1.767 1.731 1.699 0.547 1.688 0.141 0.094 0.312 0.156N-10 1.969 1.875 18 1.967 1.931 1.899 0.609 1.888 0.141 0.094 0.312 0.156N-11 2.165 2.062 18 2.157 2.121 2.089 0.609 2.078 0.141 0.125 0.312 0.156N-12 2.362 2.250 18 2.360 2.324 2.292 0.641 2.281 0.141 0.125 0.312 0.156N-13 2.559 2.438 18 2.548 2.512 2.480 0.672 2.469 0.141 0.125 0.312 0.156N-14 2.756 2.625 18 2.751 2.715 2.683 0.672 2.672 0.141 0.125 0.312 0.250AN-15 2.953 2.781 12 2.933 2.879 2.831 0.703 2.810 0.172 0.125 0.312 0.250AN-16 3.150 3.000 12 3.137 3.083 3.035 0.703 3.014 0.172 0.125 0.375 0.250AN-17 3.347 3.188 12 3.340 3.286 3.238 0.734 3.217 0.172 0.125 0.375 0.250AN-18 3.543 3.375 12 3.527 3.473 3.425 0.828 3.404 0.172 0.156 0.375 0.250AN-19 3.740 3.562 12 3.730 3.676 3.628 0.859 3.607 0.172 0.156 0.375 0.250AN-20 3.937 3.781 12 3.918 3.864 3.816 0.891 3.795 0.172 0.156 0.375 0.312AN-21 4.134 3.938 12 4.122 4.068 4.020 0.891 3.999 0.172 0.156 0.375 0.312AN-22 4.331 4.188 12 4.325 4.271 4.223 0.922 4.202 0.172 0.188 0.375 0.312AN-24 4.724 4.562 12 4.716 4.662 4.614 0.953 4.593 0.172 0.188 0.375 0.312AN-26 5.118 4.938 12 5.106 5.052 5.004 1.016 4.983 0.172 0.188 0.500 0.312AN-28 5.512 5.312 12 5.497 5.443 5.395 1.078 5.374 0.172 0.188 0.625 0.312AN-30 5.906 5.719 12 5.888 5.834 5.786 1.141 5.765 0.172 0.219 0.625 0.375AN-32 6.299 6.125 8 6.284 6.203 6.131 1.203 6.109 0.266 0.234 0.625 0.375AN-34 6.693 6.500 8 6.659 6.578 6.506 1.234 6.484 0.266 0.234 0.750 0.375AN-36 7.087 6.906 8 7.066 6.985 6.913 1.266 6.891 0.266 0.234 0.750 0.375AN-38 7.480 7.312 8 7.472 7.391 7.319 1.297 7.297 0.266 0.234 0.750 0.375AN-40 7.874 7.688 8 7.847 7.766 7.694 1.359 7.672 0.266 0.234 0.875 0.375N-44 8.661 8.312 8 8.628 8.547 8.475 1.391 8.453 0.266 0.375 1.062 0.188

SHAFT DIMENSIONSKEYWAYRELIEFTHREADS

25

N-000 SERIES LOCKNUT DIMENSIONS Inch dimensions for ball, roller, spher-ical and tapered roller bearings Larger Bore Series

N-000 SERIES LOCKNUTS

NOTES: K1 threads—American National Form NS Class 3. M1 threads—ACME Class 3G General Purpose.

LOCKNUT OUTSIDE FACE NUT SLOT SLOT FACENO. MAJOR DIA. DIA. DIA. WIDTH WIDTH DEPTH RUNOUT DIA. DEPTH B.C. DIA TAP SIZE DEPTH

d C E D G H Sd U L1 Y T1 S1

MIN. K1 M1 MAX. MAX. MAX. MAX. MAX. MAX. MIN. MIN. MIN. MIN.N-022 4.325 12 5.318 4.901 0.791 0.485 0.198 0.006N-024 4.716 12 5.693 5.313 0.823 0.485 0.198 0.006N-026 5.106 12 6.130 5.703 0.885 0.485 0.198 0.006N-028 5.497 12 6.505 6.109 0.948 0.485 0.198 0.006N-030 5.888 12 7.130 6.688 0.979 0.610 0.229 0.006N-032 6.284 8 7.505 7.094 1.041 0.610 0.229 0.006N-034 6.659 8 7.880 7.484 1.073 0.610 0.229 0.006N-036 7.066 8 8.255 7.875 1.104 0.610 0.229 0.006N-038 7.472 8 8.693 8.266 1.135 0.610 0.229 0.006N-040 7.847 8 9.443 8.750 1.198 0.735 0.323 0.006N-044 8.628 8 10.255 9.531 1.260 0.860 0.385 0.006N-048 9.442 6 11.443 10.625 1.354 0.860 0.385 0.008 10.423 5/16----18 0.625N-052 10.192 6 12.193 11.406 1.416 0.860 0.385 0.008 11.298 5/16----18 0.625N-056 11.004 6 13.005 12.219 1.510 0.980 0.385 0.008 12.110 5/16----18 0.625N-060 11.785 6 14.193 13.219 1.573 0.980 0.510 0.008 13.110 3/8----16 0.750N-064 12.562 6 15.005 14.031 1.666 0.980 0.510 0.008 13.860 3/8----16 0.750N-068 13.339 5 15.755 14.813 1.791 0.980 0.510 0.008 13.355 0.375 14.735 3/8----16 0.750N-072 14.170 5 16.505 15.500 1.791 1.230 0.510 0.008 14.186 0.375 15.485 3/8----16 0.750N-076 14.957 5 17.755 16.625 1.916 1.230 0.604 0.008 14.973 0.375 16.485 1/2----13 0.875N-080 15.745 5 18.505 17.438 2.073 1.230 0.604 0.008 15.761 0.375 17.235 1/2----13 0.875N-084 16.532 5 19.318 18.188 2.073 1.355 0.604 0.008 16.548 0.375 18.110 1/2----13 0.875N-088 17.319 5 20.505 19.250 2.385 1.355 0.604 0.008 17.335 0.375 19.110 5/8----11 1.250N-092 18.107 5 21.255 20.688 2.385 1.355 0.604 0.008 18.123 0.375 19.985 5/8----11 1.250N-096 18.894 5 22.068 20.750 2.385 1.480 0.604 0.010 18.910 0.375 20.673 5/8----11 1.250N-500 19.682 5 22.818 21.688 2.703 1.480 0.604 0.010 19.698 0.375 21.610 5/8----11 1.250N-530 20.867 4 24.818 23.250 2.703 1.605 0.823 0.010 20.887 0.500 23.360 5/8----11 1.250N-560 22.048 4 25.568 24.000 2.953 1.605 0.823 0.010 22.068 0.500 24.110 5/8----11 1.250N-600 23.623 4 27.568 26.000 2.953 1.605 0.823 0.010 23.643 0.500 25.923 5/8----11 1.250N-630 24.804 4 28.755 27.125 2.953 1.855 0.823 0.010 24.824 0.500 27.235 5/8----11 1.250N-670 26.379 4 30.693 29.125 3.140 1.855 0.823 0.010 26.399 0.500 28.985 5/8----11 1.250N-710 27.961 3 32.693 30.688 3.578 1.980 1.010 0.012 27.988 0.688 30.610 5/8----11 1.250N-750 29.536 3 34.255 32.313 3.578 2.230 1.010 0.012 29.563 0.688 32.235 5/8----11 1.250N-800 31.504 3 36.255 34.250 3.578 2.230 1.010 0.012 31.531 0.688 34.610 5/8----11 1.250N-850 33.473 3 38.568 36.375 3.578 2.480 1.010 0.012 33.500 0.688 36.485 3/4----10 1.500N-900 35.441 3 40.568 38.375 3.953 2.480 1.010 0.012 35.468 0.688 38.610 3/4----10 1.500N-950 37.410 3 43.005 40.500 3.953 2.480 1.010 0.012 37.437 0.688 40.610 3/4----10 1.500

LOCKNUT DIMENSIONSCOUNTERBORE TAPPED HOLES FOR MOUNTING

NO. PER INCHTHREADS

26

N-000 SERIES SHAFT DIMENSIONS

Inch dimensions for ball, roller, spherical and tapered roller

bearings

N-000 SERIES SHAFTS

NOTES: K1 threads—American National Form NS Class 3. M1 threads—ACME Class 3G General Purpose.

LOCKNUT BEARINGNO. BORE MAJOR PITCH MINOR LENGTH DIA. WIDTH DEPTH WIDTH

DIA. DIA. DIA.V2 L A W H S M V

MAX. K1 M1 MAX. MAX. MAX. MAX. MAX. MAX. MIN. MIN. MIN. MIN.N-022 4.331 4.188 12 4.325 4.271 4.223 0.922 4.202 0.172 0.188 0.375 0.312N-024 4.724 4.562 12 4.716 4.662 4.614 0.953 4.593 0.172 0.188 0.375 0.312N-026 5.118 4.938 12 5.106 5.052 5.004 1.016 4.983 0.172 0.188 0.500 0.312N-028 5.512 5.312 12 5.497 5.443 5.395 1.078 5.374 0.172 0.188 0.625 0.312N-030 5.906 5.719 12 5.888 5.834 5.786 1.141 5.765 0.172 0.219 0.625 0.375N-032 6.299 6.125 8 6.284 6.203 6.131 1.203 6.109 0.266 0.234 0.625 0.375N-034 6.693 6.500 8 6.659 6.578 6.506 1.234 6.484 0.266 0.234 0.750 0.375N-036 7.087 6.906 8 7.066 6.985 6.913 1.266 6.891 0.266 0.234 0.750 0.375N-038 7.480 7.312 8 7.472 7.391 7.319 1.297 7.297 0.266 0.234 0.750 0.375N-040 7.874 7.688 8 7.847 7.766 7.694 1.359 7.672 0.266 0.234 0.875 0.375N-044 8.661 8.312 8 8.628 8.547 8.475 1.391 8.453 0.266 0.375 1.062 0.188N-048 9.449 9.188 6 9.442 9.334 9.237 1.734 9.201 0.266 0.438 1.125 0.500N-052 10.236 9.938 6 10.192 10.084 9.987 1.797 9.951 0.266 0.438 1.188 0.500N-056 11.024 10.750 6 11.004 10.896 10.799 1.891 10.763 0.266 0.438 1.250 0.500N-060 11.811 11.500 6 11.785 11.677 11.580 1.953 11.544 0.266 0.438 1.375 0.500N-064 12.598 12.312 6 12.562 12.454 12.357 2.047 12.321 0.266 0.438 1.438 0.500N-068 13.386 13.062 5 13.303 13.203 13.083 2.172 13.046 0.266 0.438 1.500 0.500N-072 14.173 13.812 5 14.134 14.034 13.914 2.172 13.877 0.266 0.500 1.500 0.500N-076 14.961 14.625 5 14.921 14.821 14.701 2.297 14.664 0.266 0.500 1.500 0.500N-080 15.748 15.375 5 15.709 15.609 15.489 2.453 15.452 0.266 0.500 1.625 0.500N-084 16.535 16.188 5 16.496 16.396 16.276 2.453 16.239 0.266 0.500 1.625 0.500N-088 17.323 17.000 5 17.283 17.183 17.063 2.766 17.026 0.266 0.500 1.812 0.500N-092 18.110 17.750 5 18.071 17.971 17.851 2.766 17.814 0.266 0.500 1.812 0.500N-096 18.898 18.500 5 18.858 18.758 18.638 2.766 18.601 0.266 0.500 1.812 0.500N-500 19.685 19.250 5 19.646 19.546 19.426 3.141 19.389 0.266 0.500 1.812 0.500N-530 20.866 20.250 4 20.827 20.702 20.557 3.141 20.504 0.266 0.500 1.812 0.500N-560 22.047 21.500 4 22.008 21.883 21.738 3.391 21.685 0.266 0.500 1.812 0.500N-600 23.622 23.000 4 23.583 23.458 23.313 3.391 23.260 0.266 0.500 1.812 0.500N-630 24.803 24.250 4 24.764 24.639 24.494 3.391 24.441 0.266 0.500 2.000 0.500N-670 26.378 25.750 4 26.339 26.214 26.069 3.578 26.016 0.266 0.500 2.000 0.500N-710 27.953 27.250 3 27.914 27.747 27.560 4.109 27.507 0.391 0.625 2.000 0.500N-750 29.528 28.750 3 29.489 29.322 29.135 4.141 29.082 0.391 0.625 2.000 0.500N-800 31.496 30.750 3 31.457 31.290 31.103 4.141 31.050 0.391 0.625 2.000 0.500N-850 33.465 32.750 3 33.426 33.259 33.072 4.141 33.019 0.391 0.625 2.000 0.500N-900 35.433 34.750 3 35.394 35.227 35.040 4.516 34.987 0.391 0.625 2.000 0.500N-950 37.402 36.750 3 37.363 37.196 37.009 4.516 36.956 0.391 0.750 2.000 0.500

KEYWAYTHREADSSHAFT DIMENSIONS

NO. PERINCH

RELIEF

27

PRN/PRL-00 SERIES LOCKNUT DIMENSIONS Inch dimensions for ball, roller, spherical and tapered roller bearings Tighter Face Runout Tolerance

PRN/PRL-00 SERIES LOCKNUTS

NOTES: This series has a tighter face runout tolerance than the standard N/AN series. Also available in left hand thread , specify “PRL” series. K1 Threads—American National Form NS Class 3.


d C E D G H Sd

MIN. K1 MAX. MAX. MAX. MAX. MAX. MAX.PRN-00 0.391 32 0.755 0.625 0.229 0.120 0.073 0.001 2.0PRN-01 0.469 32 0.880 0.719 0.323 0.120 0.073 0.001 3.3PRN-02 0.586 32 1.005 0.813 0.323 0.120 0.104 0.001 3.5PRN-03 0.664 32 1.130 0.938 0.354 0.120 0.104 0.001 5.3PRN-04 0.781 32 1.380 1.125 0.385 0.178 0.104 0.001 9.0PRN-05 0.969 32 1.568 1.281 0.416 0.178 0.104 0.001 11.5PRN-06 1.173 18 1.755 1.500 0.416 0.178 0.104 0.001 13.0PRN-07 1.376 18 2.068 1.813 0.448 0.178 0.104 0.001 21.0PRN-08 1.563 18 2.255 2.000 0.448 0.240 0.104 0.001 22.5PRN-09 1.767 18 2.536 2.281 0.448 0.240 0.104 0.001 29.0PRN-10 1.967 18 2.693 2.438 0.510 0.240 0.104 0.001 34.0PRN-11 2.157 18 2.974 2.656 0.510 0.240 0.135 0.001 42.0PRN-12 2.360 18 3.161 2.844 0.541 0.240 0.135 0.001 47.0PRN-13 2.548 18 3.380 3.063 0.573 0.240 0.135 0.001 55.0PRN-14 2.751 18 3.630 3.313 0.573 0.240 0.135 0.001 63.8PRN-15 2.933 12 3.880 3.563 0.604 0.360 0.135 0.001 78.8PRN-16 3.137 12 4.161 3.844 0.604 0.360 0.135 0.001 92.5PRN-17 3.340 12 4.411 4.031 0.635 0.360 0.166 0.001 104.0PRN-18 3.527 12 4.661 4.281 0.698 0.360 0.166 0.001 130.0PRN-19 3.730 12 4.943 4.563 0.729 0.360 0.166 0.001 153.8PRN-20 3.918 12 5.193 4.813 0.760 0.360 0.166 0.001 178.8PRN-21 4.122 12 5.443 5.000 0.760 0.485 0.198 0.001 193.8PRN-22 4.325 12 5.724 5.281 0.791 0.485 0.198 0.001 223.0PRN-24 4.716 12 6.130 5.688 0.823 0.485 0.198 0.002 255.0PRN-26 5.106 12 6.755 6.188 0.885 0.610 0.260 0.002 317.0PRN-28 5.497 12 7.099 6.531 0.948 0.610 0.260 0.002 355.0PRN-30 5.888 12 7.693 7.063 0.979 0.610 0.291 0.002 475.0PRN-32 6.284 8 8.068 7.438 1.041 0.610 0.291 0.002 525.0PRN-34 6.659 8 8.661 8.031 1.073 0.610 0.291 0.002 662.5PRN-36 7.066 8 9.068 8.375 1.104 0.735 0.323 0.002 665.0PRN-38 7.472 8 9.474 8.781 1.135 0.735 0.323 0.002 775.0PRN-40 7.847 8 9.849 9.156 1.198 0.735 0.323 0.002 850.0


28

PRT-00 SERIES LOCKNUT DIMENSIONS


Narrow Versions of N Series

PRT-00 SERIES LOCKNUTS

NOTES: This series is designed to accommodate limited space applications where high precision is required.


d C E D G H Sd

MIN. K1 MAX. MAX. MAX. MAX. MAX. MAX.PRT-00 0.391 32 0.724 0.531 0.198 0.120 0.065 0.001 1.7PRT-01 0.469 32 0.818 0.625 0.198 0.120 0.065 0.001 2.1PRT-02 0.586 32 0.943 0.750 0.229 0.120 0.065 0.001 3.0PRT-03 0.664 32 1.067 0.875 0.229 0.120 0.065 0.001 3.8PRT-04 0.781 32 1.193 1.000 0.260 0.178 0.080 0.001 5.0PRT-05 0.969 32 1.380 1.188 0.260 0.178 0.065 0.001 6.0PRT-06 1.173 18 1.693 1.438 0.260 0.178 0.096 0.001 9.4PRT-07 1.376 18 1.911 1.656 0.291 0.178 0.096 0.001 12.4PRT-08 1.563 18 2.099 1.844 0.291 0.240 0.096 0.001 13.9PRT-09 1.767 18 2.317 2.062 0.291 0.240 0.096 0.001 15.9PRT-10 1.967 18 2.505 2.250 0.322 0.240 0.096 0.001 18.9PRT-11 2.157 18 2.755 2.500 0.322 0.240 0.096 0.001 22.8PRT-12 2.360 18 2.942 2.688 0.322 0.240 0.096 0.001 24.1PRT-13 2.548 18 3.130 2.875 0.354 0.240 0.096 0.001 28.4PRT-14 2.751 18 3.349 3.094 0.354 0.240 0.096 0.001 31.3PRT-15 2.933 12 3.693 3.375 0.354 0.360 0.128 0.001 43.7PRT-16 3.137 12 3.911 3.594 0.385 0.360 0.128 0.001 51.5PRT-17 3.340 12 4.130 3.812 0.385 0.360 0.128 0.001 55.6PRT-18 3.527 12 4.317 4.000 0.385 0.360 0.128 0.001 58.4


29

SN-00 SERIES LOCKNUT DIMENSIONS Inch dimensions for ball, roller, spherical and tapered roller bearings Self Locking

SN/SNL-00 SERIES LOCKNUTS

NOTES: This series is designed with a “Self-Locking” nylon insert which eliminates the need for a lockwasher and shaft keyway. Also available in left hand thread (SNL), metric (SM) and stainless steel (SNS). K1 Threads—American National Form NS Class 3.


d C E D G H Sd

MIN. K1 MAX. MAX. MAX. MAX. MAX. MAX.SN-00 0.391 32 0.755 0.625 0.276 0.120 0.073 0.002 2.0SN-01 0.469 32 0.880 0.719 0.369 0.120 0.073 0.002 3.3SN-02 0.586 32 1.005 0.813 0.369 0.120 0.104 0.002 3.5SN-03 0.664 32 1.130 0.938 0.401 0.120 0.104 0.002 5.3SN-04 0.781 32 1.380 1.125 0.432 0.178 0.104 0.002 9.0SN-05 0.969 32 1.568 1.281 0.463 0.178 0.104 0.002 11.5SN-06 1.173 18 1.755 1.500 0.463 0.178 0.104 0.002 13.0SN-07 1.376 18 2.068 1.813 0.510 0.178 0.104 0.004 21.0SN-08 1.563 18 2.255 2.000 0.510 0.240 0.104 0.004 22.5SN-09 1.767 18 2.536 2.281 0.510 0.240 0.104 0.004 29.0SN-10 1.967 18 2.693 2.438 0.573 0.240 0.104 0.004 34.0SN-11 2.157 18 2.974 2.656 0.573 0.240 0.135 0.004 42.0SN-12 2.360 18 3.161 2.844 0.604 0.240 0.135 0.004 47.0SN-13 2.548 18 3.380 3.063 0.635 0.240 0.135 0.004 55.0SN-14 2.751 18 3.630 3.313 0.635 0.240 0.135 0.004 63.8SN-15 2.933 12 3.880 3.563 0.604 0.360 0.135 0.004 78.8SN-16 3.137 12 4.161 3.844 0.604 0.360 0.135 0.004 92.5SN-17 3.340 12 4.411 4.031 0.635 0.360 0.166 0.004 104.0SN-18 3.527 12 4.661 4.281 0.698 0.360 0.166 0.004 130.0SN-19 3.730 12 4.943 4.563 0.729 0.360 0.166 0.004 153.8SN-20 3.918 12 5.193 4.813 0.760 0.360 0.166 0.004 178.8SN-21 4.122 12 5.443 5.000 0.760 0.485 0.198 0.004 193.8SN-22 4.325 12 5.724 5.281 0.791 0.485 0.198 0.004 223.0SN-24 4.716 12 6.130 5.688 0.823 0.485 0.198 0.006 255.0SN-26 5.106 12 6.755 6.188 0.885 0.610 0.260 0.006 317.0SN-28 5.497 12 7.099 6.531 0.948 0.610 0.260 0.006 355.0SN-30 5.888 12 7.693 7.063 0.979 0.610 0.291 0.006 475.0SN-32 6.284 8 8.068 7.438 1.041 0.610 0.291 0.006 525.0SN-34 6.659 8 8.661 8.031 1.073 0.610 0.291 0.006 662.5SN-36 7.066 8 9.068 8.375 1.104 0.735 0.323 0.006 665.0SN-38 7.472 8 9.474 8.781 1.135 0.735 0.323 0.006 775.0SN-40 7.847 8 9.849 9.156 1.198 0.735 0.323 0.006 850.0

THREADSLOCKNUT DIMENSIONS

30

SNH-00 SERIES LOCKNUT DIMENSIONS


Self-Locking and High Temperature

SNH-00 SERIES LOCKNUTS

NOTES: This series is designed with a “Self-Locking” nylon insert which can accommodate temperatures up to 350°F. K1 Threads—American National Form Class 3.

LOCKNUT OUTSIDE FACE NUT SLOT SLOTNO. MAJOR DIA. NO. PER INCH DIA. DIA. WIDTH WIDTH DEPTH

d C E D G HMIN. K1 MAX. MAX. MAX. MAX. MAX.

SNH-00 0.391 32 0.755 0.625 0.229 0.120 0.073SNH-01 0.469 32 0.880 0.719 0.323 0.120 0.073SNH-02 0.586 32 1.005 0.813 0.323 0.120 0.104SNH-03 0.664 32 1.130 0.938 0.354 0.120 0.104SNH-04 0.781 32 1.380 1.125 0.385 0.178 0.104SNH-05 0.969 32 1.568 1.281 0.416 0.178 0.104SNH-06 1.173 18 1.755 1.500 0.416 0.178 0.104SNH-07 1.376 18 2.068 1.813 0.448 0.178 0.104SNH-08 1.563 18 2.255 2.000 0.448 0.240 0.104SNH-09 1.767 18 2.536 2.281 0.448 0.240 0.104SNH-10 1.967 18 2.693 2.438 0.510 0.240 0.104SNH-11 2.157 18 2.974 2.656 0.510 0.240 0.135SNH-12 2.360 18 3.161 2.844 0.541 0.240 0.135SNH-13 2.548 18 3.380 3.063 0.573 0.240 0.135SNH-14 2.751 18 3.630 3.313 0.573 0.240 0.135SNH-15 2.933 12 3.880 3.563 0.604 0.360 0.135SNH-16 3.137 12 4.161 3.844 0.604 0.360 0.135SNH-17 3.340 12 4.411 4.031 0.635 0.360 0.166SNH-18 3.527 12 4.661 4.281 0.698 0.360 0.166SNH-19 3.730 12 4.943 4.563 0.729 0.360 0.166SNH-20 3.918 12 5.193 4.813 0.760 0.360 0.166SNH-21 4.122 12 5.443 5.000 0.760 0.485 0.198SNH-22 4.325 12 5.724 5.281 0.791 0.485 0.198


31

NHE-00 SERIES LOCKNUT DIMENSIONS Inch dimensions for ball, roller, spher-ical and tapered roller bearings Heavy Load

NHE-00 SERIES LOCKNUTS

NOTES: This series is designed with a wider nut width (D) to accommodate heavier loads. K1 Threads—American National Form NS Class 3.


d C E D G H Sd

MIN. K1 MAX. MAX. MAX. MAX. MAX. MAX.NHE-08 1.563 18 2.255 2.000 0.572 0.240 0.104 0.002 35.7NHE-09 1.767 18 2.536 2.281 0.572 0.240 0.104 0.002 44.4NHE-10 1.967 18 2.693 2.438 0.635 0.240 0.104 0.002 50.7NHE-11 2.157 18 2.974 2.656 0.635 0.240 0.135 0.002 62.4NHE-12 2.360 18 3.161 2.844 0.666 0.240 0.135 0.002 69.3NHE-13 2.548 18 3.380 3.063 0.729 0.240 0.135 0.002 84.4NHE-14 2.751 18 3.630 3.313 0.729 0.240 0.135 0.002 95.7NHE-15 2.933 12 3.880 3.563 0.760 0.360 0.135 0.002 117.9NHE-16 3.137 12 4.161 3.844 0.760 0.360 0.135 0.002 135.9NHE-17 3.340 12 4.411 4.031 0.791 0.360 0.166 0.002 156.5NHE-18 3.527 12 4.661 4.281 0.885 0.360 0.166 0.002 195.2NHE-19 3.730 12 4.943 4.563 0.916 0.360 0.166 0.002 227.9NHE-20 3.918 12 5.193 4.813 0.948 0.360 0.166 0.002 259.7NHE-21 4.122 12 5.443 5.000 0.948 0.485 0.198 0.002 282.0NHE-22 4.325 12 5.724 5.281 0.979 0.485 0.198 0.002 323.0NHE-24 4.716 12 6.130 5.688 1.041 0.485 0.198 0.002 374.7NHE-26 5.106 12 6.755 6.188 1.104 0.610 0.260 0.002 502.8NHE-28 5.497 12 7.099 6.531 1.198 0.610 0.260 0.002 564.0NHE-30 5.888 12 7.693 7.063 1.260 0.610 0.291 0.002 716.7NHE-32 6.284 8 8.068 7.438 1.291 0.610 0.291 0.002 783.7NHE-34 6.659 8 8.661 8.031 1.354 0.610 0.291 0.002 977.6NHE-36 7.066 8 9.068 8.375 1.416 0.735 0.323 0.002 1077.2NHE-38 7.472 8 9.474 8.781 1.416 0.735 0.323 0.002 1131.8NHE-40 7.847 8 9.849 9.156 1.510 0.735 0.323 0.002 1260.8


32

NIN-00 SERIES LOCKNUT DIMENSIONS

Inch dimensions for ball, roller, spherical and tapered roller

bearings

16 Threads per Inch

NIN-00 SERIES LOCKNUTS

NOTES: K1 Threads—American National Form Class 3.


d C E D G H Sd

MIN. K1 MAX. MAX. MAX. MAX. MAX. MAX.NIN-01 0.750 16 1.505 1.188 0.385 0.240 0.138 0.002 14.5NIN-02 0.875 16 1.630 1.313 0.385 0.240 0.138 0.002 16.1NIN-03 1.000 16 1.755 1.438 0.385 0.240 0.138 0.002 17.7NIN-04 1.125 16 1.880 1.563 0.385 0.240 0.138 0.002 19.3NIN-05 1.250 16 2.005 1.688 0.510 0.240 0.138 0.004 27.7NIN-06 1.375 16 2.255 1.938 0.510 0.240 0.138 0.004 36.0NIN-07 1.500 16 2.255 1.938 0.510 0.240 0.138 0.004 32.0NIN-08 1.625 16 2.505 2.188 0.510 0.302 0.138 0.004 41.0NIN-09 1.750 16 2.630 2.313 0.510 0.302 0.138 0.004 43.4NIN-10 1.875 16 2.755 2.438 0.510 0.302 0.138 0.004 45.9NIN-11 2.000 16 3.005 2.688 0.510 0.302 0.138 0.004 56.7NIN-12 2.250 16 3.255 2.875 0.635 0.302 0.169 0.004 77.7NIN-13 2.500 16 3.505 3.125 0.635 0.302 0.169 0.004 84.8NIN-14 2.750 16 3.755 3.375 0.635 0.302 0.169 0.004 91.8


33

NTH-00 SERIES LOCKNUT DIMENSIONS Inch dimensions for ball, roller, spher-ical and tapered roller bearings Thinner Design

NTH-00 SERIES LOCKNUTS

NOTES: This series is designed with a thinner width (D) to accommodate narrow spaces. K1 Threads—American National Form NS Class 3.


d C E D G H Sd

MIN. K1 MAX. MAX. MAX. MAX. MAX. MAX.NTH-00 0.391 32 0.724 0.531 0.198 0.120 0.065 0.002 1.7NTH-01 0.469 32 0.818 0.625 0.198 0.120 0.065 0.002 2.1NTH-02 0.586 32 0.943 0.750 0.229 0.120 0.065 0.002 3.0NTH-03 0.664 32 1.068 0.875 0.229 0.120 0.065 0.002 3.8NTH-04 0.781 32 1.193 1.000 0.260 0.178 0.080 0.002 5.0NTH-05 0.969 32 1.380 1.188 0.260 0.178 0.065 0.002 6.0NTH-06 1.173 18 1.693 1.438 0.260 0.178 0.096 0.002 9.4NTH-07 1.376 18 1.911 1.656 0.291 0.178 0.096 0.004 12.4NTH-08 1.563 18 2.099 1.844 0.291 0.240 0.096 0.004 13.9NTH-09 1.767 18 2.318 2.062 0.291 0.240 0.096 0.004 15.9NTH-10 1.967 18 2.505 2.250 0.322 0.240 0.096 0.004 18.9NTH-11 2.157 18 2.755 2.500 0.322 0.240 0.096 0.004 22.8NTH-12 2.360 18 2.943 2.688 0.322 0.240 0.096 0.004 24.1NTH-13 2.548 18 3.130 2.875 0.354 0.240 0.096 0.004 28.4NTH-14 2.751 18 3.349 3.094 0.354 0.240 0.096 0.004 31.3NTH-15 2.933 12 3.693 3.375 0.354 0.360 0.128 0.004 43.7NTH-16 3.137 12 3.911 3.594 0.385 0.360 0.128 0.004 51.5NTH-17 3.340 12 4.130 3.812 0.385 0.360 0.128 0.004 55.6NTH-18 3.527 12 4.318 4.000 0.385 0.360 0.128 0.004 58.4


34

KM-00 SERIES LOCKNUT DIMENSIONS

Metric dimensions for ball, roller, spheri-cal and tapered roller bearings

Metric Design

KM-00 SERIES LOCKNUTS

NOTES: KM0—KM34 are available with 360° insert. Also available in stainless steel. HM-Series Locknuts are also available.

LOCKNUT METRIC OUTSIDE FACE NUT SLOT SLOT FACENO. THREADS DIA. DIA. WIDTH WIDTH DEPTH RUNOUT

C E D G H Sd

MAX. MAX. MAX. MAX. MAX. MAX.KM 0 M 10x0.75 0.709 0.531 0.157 0.118 0.079 0.002KM 1 M 12x1 0.866 0.669 0.157 0.118 0.079 0.002KM 2 M 15x1 0.984 0.827 0.197 0.157 0.079 0.002KM 3 M 17x1 1.102 0.945 0.197 0.157 0.079 0.002KM 4 M 20x1 1.260 1.024 0.236 0.157 0.079 0.002KM 4.4 M 22x1 1.339 1.102 0.236 0.157 0.079 0.002KM 5 M 25x1.5 1.496 1.206 0.276 0.197 0.079 0.002KM 5.6 M 28x1.5 1.654 1.417 0.276 0.197 0.079 0.002KM 6 M 30x1.5 1.772 1.496 0.276 0.197 0.079 0.002KM 6.4 M 32x1.5 1.890 1.575 0.315 0.197 0.079 0.002KM 7 M 35x1.5 2.047 1.732 0.315 0.197 0.079 0.002KM 8 M 40x1.5 2.283 1.969 0.354 0.236 0.098 0.002KM 9 M 45x1.5 2.559 2.205 0.394 0.236 0.098 0.002KM 10 M 50x1.5 2.756 2.402 0.433 0.236 0.098 0.002KM 11 M 55x2 2.953 2.638 0.433 0.276 0.118 0.002KM 12 M 60x2 3.150 2.874 0.433 0.276 0.118 0.002KM 13 M 65x2 3.346 3.110 0.472 0.276 0.118 0.002KM 14 M 70x2 3.622 3.346 0.472 0.315 0.138 0.002KM 15 M 75x2 3.858 3.543 0.512 0.315 0.138 0.002KM 16 M 80x2 4.134 3.740 0.591 0.315 0.138 0.002KM 17 M 85x2 4.331 4.016 0.630 0.315 0.138 0.002KM 18 M 90x2 4.724 4.252 0.630 0.394 0.157 0.002KM 19 M 95x2 4.921 4.449 0.669 0.394 0.157 0.002KM 20 M100x2 5.118 4.724 0.709 0.394 0.157 0.002KM 21 M105x2 5.512 4.961 0.709 0.472 0.197 0.002KM 22 M110x2 5.709 5.236 0.748 0.472 0.197 0.002KM 23 M115x2 5.906 5.394 0.748 0.472 0.197 0.002KM 24 M120x2 6.102 5.433 0.787 0.472 0.197 0.002KM 25 M125x2 6.299 5.827 0.827 0.472 0.197 0.002KM 26 M130x2 6.496 5.866 0.827 0.472 0.197 0.002KM 27 M135x2 6.890 6.299 0.866 0.551 0.236 0.002KM 28 M140x2 7.087 6.299 0.866 0.551 0.236 0.002KM 29 M145x2 7.480 6.732 0.945 0.551 0.236 0.002KM 30 M150x2 7.677 6.732 0.945 0.551 0.236 0.002KM 31 M155x3 7.874 7.165 0.984 0.630 0.276 0.002KM 32 M160x3 8.268 7.165 0.984 0.630 0.276 0.002KM 33 M165x3 8.268 7.598 1.024 0.630 0.276 0.002KM 34 M170x3 8.661 7.598 1.024 0.630 0.276 0.002KM 36 M180x3 9.055 7.992 1.063 0.709 0.315 0.002KM 38 M190x3 9.449 8.425 1.102 0.709 0.315 0.002KM 40 M200x3 9.843 8.898 1.142 0.709 0.315 0.002KM 44 Tr220x3 11.024 9.843 1.260 0.787 0.394 0.002KM 48 Tr240x4 11.811 10.630 1.339 0.787 0.394 0.002KM 52 Tr260x4 12.992 11.811 1.417 0.945 0.472 0.003KM 56 Tr280x4 13.780 12.598 1.496 0.945 0.472 0.003

LOCKNUT DIMENSIONS

35

W-00 & W-000 SERIES LOCKWASHER DIMENSIONS For use with N and AN Locknut Series

LOCKWASHERS

BORE INSIDE NO. OF PROJECTION APP. WT.DIMENSION TANGS (LB./C)

R X VMIN. MIN. MIN.

W-00 W-000 W-00 W-000 W-00 W-000 W-00 W-000 W-00 W-00 W-000 W-00 W-000W-00 0.406 0.625 0.875 0.120 0.334 9 0.063 0.120 0.032 0.50W-01 0.484 0.719 1.016 0.120 0.412 9 0.063 0.120 0.032 0.50W-02 0.601 0.813 1.156 0.120 0.529 11 0.063 0.120 0.032 0.50W-03 0.679 0.938 1.328 0.120 0.607 11 0.063 0.120 0.032 0.80W-04 0.801 1.125 1.531 0.176 0.729 11 0.063 0.166 0.032 1.30W-05 0.989 1.281 1.719 0.176 0.909 13 0.094 0.166 0.040 1.50W-06 1.193 1.500 1.922 0.176 1.093 13 0.094 0.166 0.040 1.50W-07 1.396 1.813 2.250 0.176 1.296 15 0.094 0.166 0.040 2.30W-08 1.583 2.000 2.496 0.290 1.475 15 0.094 0.234 0.048 3.30W-09 1.792 2.281 2.734 0.290 1.684 17 0.125 0.234 0.048 4.30W-10 1.992 2.438 2.922 0.290 1.884 17 0.125 0.234 0.048 4.50W-11 2.182 2.656 3.109 0.290 2.069 17 0.125 0.234 0.053 4.80W-12 2.400 2.844 3.344 0.290 2.267 17 0.125 0.234 0.053 4.80W-13 2.588 3.063 3.578 0.290 2.455 19 0.125 0.234 0.053 6.00W-14 2.791 3.313 3.828 0.290 2.658 19 0.188 0.234 0.053 6.50W-15 2.973 3.563 4.109 0.290 2.831 19 0.188 0.328 0.062 10.00W-16 3.177 3.844 4.375 0.353 3.035 19 0.188 0.328 0.062 11.50W-17 3.395 4.031 4.625 0.353 3.253 19 0.188 0.328 0.062 12.00W-18 3.582 4.281 4.938 0.353 3.418 19 0.188 0.328 0.084 16.80W-19 3.800 4.563 5.219 0.353 3.636 19 0.188 0.328 0.084 19.50W-20 3.988 4.813 5.500 0.353 3.809 19 0.250 0.328 0.084 20.50W-21 4.192 5.000 5.703 0.353 4.013 19 0.250 0.390 0.084 23.80W-22 W-022 4.395 5.281 4.921 6.063 5.688 0.353 0.350 4.185 19 0.250 0.390 0.390 0.115 0.115 34.50W-24 W-024 4.801 5.688 5.333 6.469 6.188 0.353 0.350 4.591 19 0.250 0.390 0.390 0.115 0.115 39.00W-26 W-026 5.191 6.188 5.723 7.031 6.625 0.435 0.469 4.961 19 0.250 0.520 0.390 0.115 0.115 43.00W-28 W-028 5.582 6.531 6.129 7.438 7.094 0.590 0.594 5.352 19 0.250 0.520 0.390 0.115 0.115 46.50W-30 W-030 5.983 7.063 6.708 8.063 7.719 0.590 0.594 5.722 19 0.312 0.520 0.520 0.146 0.115 71.00W-32 W-032 6.389 7.438 7.114 8.438 8.156 0.590 0.594 6.128 19 0.312 0.520 0.520 0.146 0.115 73.50W-34 W-034 6.764 8.031 7.508 9.063 8.594 0.715 0.719 6.503 19 0.312 0.520 0.520 0.146 0.115 90.50W-36 W-036 7.171 8.375 7.899 9.438 9.000 0.715 0.719 6.910 19 0.312 0.645 0.520 0.146 0.115 93.50W-38 W-038 7.577 8.781 8.290 9.875 9.438 0.715 0.719 7.316 19 0.312 0.645 0.520 0.146 0.115 105.00W-40 W-040 7.982 9.156 8.774 10.313 9.969 0.840 0.844 7.721 19 0.312 0.645 0.645 0.146 0.115 111.00W-44 W-044 8.701 9.875 9.570 11.438 10.406 0.940 0.945 8.327 19 0.878 0.770 0.146 0.115 118.00

E QTSBMIN. MAX. MAX. MIN.MAX.

LOCKWASHER DIMENSIONSLOCKWASHER

NO. DIAMETERFACE DIA. OVER KEY

TANGS WIDTHTANG TANG

THICKNESSWIDTH

38

PRW-00 & PRWT-00 SERIES LOCKWASHER DIMENSIONS

PRW for use with PRN and PRL Precision Locknut Series.

PRWT for use with PRT Precision Locknut Series.

LOCKWASHERS

LOCKWASHER DIAMETERNO. OVER TANGS NO. RADIUS

B ZMIN. MAX. MIN. MAX. MIN. MAX. +1/16 - 0 MIN. MAX. MIN. MAX. MIN. MAX. MIN. MAX.

PRW-00 0.034 0.042 0.406 0.421 0.625 0.640 15/16 9 0.110 0.120 0.062 0.094 0.110 0.120 0.334 0.359 1/64PRW-01 0.034 0.042 0.484 0.499 0.719 0.734 1 7/64 9 0.110 0.120 0.062 0.094 0.110 0.120 0.412 0.437 1/64PRW-02 0.047 0.055 0.601 0.616 0.813 0.827 1 1/4 11 0.110 0.120 0.062 0.094 0.110 0.120 0.529 0.554 1/64PRW-03 0.047 0.055 0.679 0.694 0.938 0.953 1 13/32 11 0.110 0.120 0.062 0.094 0.110 0.120 0.607 0.632 1/64PRW-04 0.047 0.055 0.801 0.816 1.125 1.140 1 21/32 11 0.146 0.166 0.062 0.094 0.156 0.176 0.729 0.754 1/64PRW-05 0.050 0.058 0.989 1.009 1.281 1.296 1 51/64 13 0.146 0.166 0.093 0.125 0.156 0.176 0.909 0.939 1/64PRW-06 0.050 0.058 1.193 1.213 1.500 1.515 2 1/16 13 0.146 0.166 0.093 0.125 0.156 0.176 1.093 1.128 1/32PRW-065 0.050 0.058 1.333 1.353 1.813 1.827 2 21/64 15 0.146 0.166 0.093 0.125 0.156 0.176 1.221 1.256 1/32PRW-07 0.050 0.058 1.396 1.416 1.813 1.827 2 11/32 15 0.146 0.166 0.093 0.125 0.156 0.176 1.296 1.331 1/32PRW-08 0.059 0.067 1.583 1.603 2.000 2.030 2 37/64 15 0.204 0.234 0.093 0.125 0.250 0.290 1.475 1.510 1/32PRW-09 0.059 0.067 1.792 1.817 2.281 2.311 2 13/16 17 0.204 0.234 0.125 0.156 0.250 0.290 1.684 1.724 1/32PRW-10 0.059 0.067 1.992 2.017 2.438 2.468 3 1/32 17 0.204 0.234 0.125 0.156 0.250 0.290 1.884 1.924 1/32PRW-11 0.059 0.067 2.182 2.207 2.656 2.686 3 3/16 17 0.204 0.234 0.125 0.156 0.250 0.290 2.069 2.109 1/32PRW-12 0.070 0.078 2.400 2.425 2.844 2.874 3 7/16 17 0.204 0.234 0.125 0.156 0.250 0.290 2.267 2.307 3/64PRW-13 0.070 0.078 2.588 2.613 3.063 3.093 3 43/64 19 0.204 0.234 0.125 0.156 0.250 0.290 2.455 2.495 3/64PRW-14 0.070 0.078 2.791 2.816 3.313 3.343 3 29/32 19 0.204 0.234 0.187 0.250 0.250 0.290 2.658 2.698 3/64PRW-15 0.083 0.091 2.973 3.003 3.563 3.593 4 5/32 19 0.298 0.328 0.187 0.250 0.250 0.290 2.831 2.867 3/64PRW-16 0.083 0.091 3.177 3.207 3.844 3.874 4 1/2 19 0.298 0.328 0.187 0.250 0.313 0.353 3.035 3.080 3/64PRW-17 0.083 0.091 3.395 3.425 4.031 4.061 4 25/32 19 0.298 0.328 0.187 0.250 0.313 0.353 3.253 3.298 3/64PRW-18 0.111 0.119 3.582 3.612 4.281 4.326 5 5/64 19 0.298 0.328 0.187 0.250 0.313 0.353 3.418 3.463 3/64PRW-19 0.111 0.119 3.800 3.830 4.563 4.607 5 23/64 19 0.298 0.328 0.187 0.250 0.313 0.353 3.636 3.681 3/64PRW-20 0.111 0.119 3.988 4.018 4.813 4.858 5 5/8 19 0.298 0.328 0.250 0.313 0.313 0.353 3.809 3.859 3/64PRW-21 0.111 0.119 4.192 4.222 5.000 5.045 5 27/32 19 0.360 0.390 0.250 0.313 0.313 0.353 4.013 4.063 3/64PRW-22 0.125 0.135 4.395 4.425 5.281 5.326 6 9/64 19 0.360 0.390 0.250 0.313 0.313 0.353 4.185 4.235 3/64PRW-24 0.145 0.155 4.801 4.831 5.688 5.733 6 45/64 19 0.360 0.390 0.250 0.313 0.313 0.353 4.591 4.641 3/64PRW-26 0.145 0.155 5.191 5.226 6.188 6.233 7 5/16 19 0.480 0.520 0.250 0.313 0.375 0.435 4.961 5.016 1/16PRW-28 0.145 0.155 5.582 5.617 6.531 6.576 7 5/8 19 0.480 0.520 0.250 0.313 0.500 0.590 5.352 5.407 1/16PRW-30 0.180 0.195 5.983 6.018 7.063 7.123 8 9/32 19 0.480 0.520 0.312 0.375 0.500 0.590 5.722 5.777 1/16PRW-32 0.180 0.195 6.389 6.424 7.438 7.498 8 43/64 19 0.480 0.520 0.312 0.375 0.500 0.590 6.128 6.183 1/16PRW-34 0.180 0.195 6.764 6.799 8.031 8.091 9 19/64 19 0.480 0.520 0.312 0.375 0.625 0.715 6.503 6.558 1/16PRW-36 0.180 0.195 7.171 7.206 8.375 8.435 9 21/32 19 0.605 0.645 0.312 0.375 0.625 0.715 6.910 6.965 1/16PRW-38 0.180 0.195 7.577 7.612 8.781 8.841 10 3/32 19 0.605 0.645 0.312 0.375 0.625 0.715 7.316 7.371 1/16PRW-40 0.180 0.195 7.982 8.017 9.156 9.216 10 11/16 19 0.605 0.645 0.312 0.375 0.750 0.840 7.721 7.776 1/16

XQ R W T Y S

KEY BENTDIAMETER WIDTH PROJECTION WIDTH CLEARANCE

LOCKWASHER DIMENSIONSTHICKNESS BORE FACE TANGS



PRWT-00 0.034 0.042 0.406 0.421 0.531 0.551 57/64 9 0.084 0.104 0.062 0.094 0.110 0.120 0.333 0.353 1/64PRWT-01 0.034 0.042 0.484 0.499 0.625 0.645 63/64 9 0.084 0.104 0.062 0.094 0.110 0.120 0.411 0.431 1/64PRWT-02 0.034 0.042 0.601 0.616 0.750 0.770 1 11/64 11 0.084 0.104 0.062 0.094 0.110 0.120 0.513 0.533 1/64PRWT-03 0.034 0.042 0.679 0.694 0.875 0.895 1 9/32 11 0.084 0.104 0.062 0.094 0.110 0.120 0.591 0.611 1/64PRWT-04 0.034 0.042 0.801 0.816 1.000 1.020 1 7/16 11 0.146 0.166 0.062 0.094 0.156 0.176 0.724 0.744 1/64PRWT-05 0.042 0.050 0.989 1.009 1.188 1.208 1 41/64 13 0.146 0.166 0.093 0.125 0.156 0.176 0.880 0.900 1/64PRWT-06 0.042 0.050 1.193 1.213 1.438 1.458 1 61/64 13 0.146 0.166 0.093 0.125 0.156 0.176 1.084 1.104 1/32PRWT-07 0.042 0.050 1.396 1.416 1.656 1.676 2 11/64 15 0.146 0.166 0.093 0.125 0.156 0.176 1.287 1.307 1/32PRWT-08 0.054 0.064 1.583 1.603 1.844 1.864 2 21/64 15 0.204 0.234 0.093 0.125 0.280 0.300 1.474 1.494 1/32PRWT-09 0.054 0.064 1.792 1.817 2.062 2.082 2 19/32 17 0.204 0.234 0.125 0.156 0.280 0.300 1.693 1.713 1/32PRWT-10 0.054 0.064 1.992 2.017 2.250 2.270 2 25/32 17 0.204 0.234 0.125 0.156 0.280 0.300 1.880 1.900 1/32PRWT-11 0.054 0.064 2.182 2.207 2.500 2.520 3 1/16 17 0.204 0.234 0.125 0.156 0.280 0.300 2.067 2.087 1/32PRWT-12 0.054 0.064 2.400 2.425 2.688 2.708 3 9/32 17 0.204 0.234 0.125 0.156 0.280 0.300 2.255 2.275 3/64PRWT-13 0.054 0.064 2.588 2.613 2.875 2.895 3 15/32 19 0.204 0.234 0.125 0.156 0.280 0.300 2.443 2.463 3/64PRWT-14 0.054 0.064 2.791 2.816 3.094 3.114 3 11/16 19 0.204 0.234 0.187 0.250 0.280 0.300 2.631 2.651 3/64PRWT-15 0.054 0.064 2.973 3.003 3.375 3.395 4 1/32 19 0.297 0.327 0.187 0.250 0.280 0.300 2.813 2.833 3/64PRWT-16 0.054 0.064 3.177 3.207 3.594 3.614 4 1/4 19 0.297 0.327 0.187 0.250 0.340 0.360 3.017 3.037 3/64PRWT-17 0.054 0.064 3.395 3.425 3.812 3.832 4 15/32 19 0.297 0.327 0.187 0.250 0.340 0.360 3.220 3.240 3/64PRWT-18 0.054 0.064 3.582 3.612 4.000 4.020 4 21/32 19 0.297 0.327 0.187 0.250 0.340 0.360 3.380 3.400 3/64

CLEARANCEQ R W T Y S X

DIAMETER WIDTH PROJECTION WIDTHKEY BENT


39

TW-000 SERIES LOCKWASHER DIMENSIONS For use with tapered roller bearings Opposite tab bend Heavy Duty

LOCKWASHERS



TW-100 0.032 0.038 0.406 0.421 0.625 0.640 57/64 9 0.110 0.120 0.062 0.094 0.110 0.120 0.334 0.359 1/64TW-101 0.032 0.038 0.484 0.499 0.719 0.734 1 1/32 9 0.110 0.120 0.062 0.094 0.110 0.120 0.412 0.437 1/64TW-102 0.048 0.054 0.601 0.616 0.813 0.828 1 5/32 11 0.110 0.120 0.062 0.094 0.110 0.120 0.513 0.538 1/64TW-103 0.048 0.054 0.679 0.694 0.938 0.953 1 11/32 11 0.110 0.120 0.062 0.094 0.110 0.120 0.591 0.616 1/64TW-104 0.048 0.054 0.801 0.816 1.125 1.140 1 9/16 11 0.146 0.166 0.062 0.094 0.156 0.176 0.713 0.738 1/64TW-105 0.052 0.058 0.989 1.009 1.281 1.296 1 45/64 13 0.146 0.166 0.093 0.125 0.156 0.176 0.897 0.927 1/64TW-106 0.052 0.058 1.193 1.213 1.500 1.515 1 61/64 13 0.146 0.166 0.093 0.125 0.156 0.176 1.081 1.116 1/32TW-065 0.052 0.058 1.333 1.353 1.813 1.828 2 15/64 15 0.146 0.166 0.093 0.125 0.156 0.176 1.221 1.256 1/32TW-107 0.052 0.058 1.396 1.416 1.813 1.828 2 1/4 15 0.146 0.166 0.093 0.125 0.156 0.176 1.284 1.319 1/32TW-108 0.062 0.070 1.583 1.603 2.000 2.030 2 31/64 15 0.204 0.234 0.093 0.125 0.250 0.290 1.461 1.196 1/32TW-109 0.062 0.070 1.792 1.817 2.281 2.311 2 23/32 17 0.204 0.234 0.125 0.156 0.250 0.290 1.670 1.710 1/32TW-110 0.062 0.070 1.992 2.017 2.438 2.468 2 59/64 17 0.204 0.234 0.125 0.156 0.250 0.290 1.870 1.910 1/32TW-111 0.062 0.070 2.182 2.207 2.656 2.686 3 3/32 17 0.204 0.234 0.125 0.156 0.250 0.290 2.060 2.100 1/32TW-112 0.072 0.080 2.400 2.425 2.844 2.874 3 21/64 17 0.204 0.234 0.125 0.156 0.250 0.290 2.248 2.288 3/64TW-113 0.072 0.080 2.588 2.613 3.063 3.093 3 9/16 19 0.204 0.234 0.125 0.156 0.250 0.290 2.436 2.476 3/64TW-114 0.072 0.080 2.791 2.816 3.313 3.343 3 13/16 19 0.204 0.234 0.187 0.250 0.250 0.290 2.639 2.679 3/64TW-115 0.085 0.095 2.973 3.003 3.563 3.593 4 3/64 19 0.298 0.328 0.187 0.250 0.250 0.290 2.808 2.853 3/64TW-116 0.085 0.095 3.177 3.207 3.844 3.874 4 25/64 19 0.298 0.328 0.187 0.250 0.313 0.353 3.012 3.057 3/64TW-117 0.085 0.095 3.395 3.425 4.031 4.061 4 5/8 19 0.298 0.328 0.187 0.250 0.313 0.353 3.230 3.275 3/64TW-118 0.115 0.125 3.582 3.612 4.281 4.326 4 61/64 19 0.298 0.328 0.187 0.250 0.313 0.353 3.387 3.432 3/64TW-119 0.115 0.125 3.800 3.830 4.563 4.608 5 15/64 19 0.298 0.328 0.187 0.250 0.313 0.353 3.605 3.650 3/64TW-120 0.115 0.125 3.988 4.018 4.813 4.858 5 31/64 19 0.298 0.328 0.250 0.313 0.313 0.353 3.778 3.828 3/64TW-121 0.115 0.125 4.192 4.222 5.000 5.045 5 45/64 19 0.360 0.390 0.250 0.313 0.313 0.353 3.982 4.032 3/64TW-122 0.130 0.140 4.395 4.425 5.281 5.326 6 19 0.360 0.390 0.250 0.313 0.313 0.353 4.170 4.220 3/64TW-124 0.155 0.165 4.801 4.831 5.688 5.733 6 17/32 19 0.360 0.390 0.250 0.313 0.313 0.353 4.551 4.601 3/64TW-126 0.155 0.165 5.191 5.226 6.188 6.233 7 3/64 19 0.480 0.520 0.250 0.313 0.375 0.435 4.921 4.976 1/16TW-128 0.155 0.165 5.582 5.617 6.531 6.576 7 7/16 19 0.480 0.520 0.250 0.313 0.500 0.590 5.312 5.367 1/16TW-130 0.193 0.205 5.983 6.018 7.063 7.123 8 1/16 19 0.480 0.520 0.312 0.375 0.500 0.590 5.675 5.730 1/16TW-132 0.193 0.205 6.389 6.424 7.438 7.498 8 29/64 19 0.480 0.520 0.312 0.375 0.500 0.590 6.081 6.136 1/16TW-134 0.193 0.205 6.764 6.799 8.031 8.091 9 5/64 19 0.480 0.520 0.312 0.375 0.625 0.715 6.456 6.511 1/16TW-136 0.193 0.205 7.171 7.206 8.375 8.435 9 7/16 19 0.605 0.645 0.312 0.375 0.625 0.715 6.863 6.918 1/16TW-138 0.193 0.205 7.577 7.612 8.781 8.841 9 55/64 19 0.605 0.645 0.312 0.375 0.625 0.715 7.269 7.324 1/16TW-140 0.193 0.205 7.982 8.017 9.156 9.216 10 13/32 19 0.605 0.645 0.312 0.375 0.750 0.840 7.674 7.729 1/16

XQ R W T Y S

KEY BENTDIAMETER WIDTH PROJECTION WIDTH CLEARANCE


40

WTH-00 & WIN-00 SERIES LOCKWASHER DIMENSIONS

WTH for use with NTH Locknut Series WIN for use with NIN Locknut Series

LOCKWASHERS


B ZMIN. MAX. MIN. MAX. MIN. MAX. +0 - 1/16 MIN. MAX. MIN. MAX. MIN. MAX. MIN. MAX.

WTH-00 0.036 0.044 0.406 0.421 0.531 0.551 53/64 9 0.084 0.104 0.062 0.094 0.110 0.120 0.333 0.353 1/64WTH-01 0.036 0.044 0.484 0.499 0.625 0.645 59/64 9 0.084 0.104 0.062 0.094 0.110 0.120 0.411 0.431 1/64WTH-02 0.036 0.044 0.601 0.616 0.750 0.770 1 3/32 11 0.084 0.104 0.062 0.094 0.110 0.120 0.513 0.533 1/64WTH-03 0.036 0.044 0.679 0.694 0.875 0.895 1 13/64 11 0.084 0.104 0.062 0.094 0.110 0.120 0.591 0.611 1/64WTH-04 0.036 0.044 0.801 0.816 1.000 1.020 1 3/8 11 0.146 0.166 0.062 0.094 0.156 0.176 0.724 0.744 1/64WTH-05 0.046 0.054 0.989 1.009 1.188 1.208 1 9/16 13 0.146 0.166 0.093 0.125 0.156 0.176 0.880 0.900 1/64WTH-06 0.046 0.054 1.193 1.213 1.438 1.458 1 55/64 13 0.146 0.166 0.093 0.125 0.156 0.176 1.084 1.104 1/32WTH-07 0.046 0.054 1.396 1.416 1.656 1.676 2 5/64 15 0.146 0.166 0.093 0.125 0.156 0.176 1.287 1.307 1/32WTH-08 0.058 0.068 1.583 1.603 1.844 1.864 2 1/4 15 0.204 0.234 0.093 0.125 0.280 0.300 1.474 1.494 1/32WTH-09 0.058 0.068 1.792 1.817 2.062 2.082 2 1/2 17 0.204 0.234 0.125 0.156 0.280 0.300 1.693 1.713 1/32WTH-10 0.058 0.068 1.992 2.017 2.250 2.270 2 11/16 17 0.204 0.234 0.125 0.156 0.280 0.300 1.880 1.900 1/32WTH-11 0.058 0.068 2.182 2.207 2.500 2.520 2 61/64 17 0.204 0.234 0.125 0.156 0.280 0.300 2.067 2.087 1/32WTH-12 0.058 0.068 2.400 2.425 2.688 2.708 3 3/16 17 0.204 0.234 0.125 0.156 0.280 0.300 2.255 2.275 3/64WTH-13 0.058 0.068 2.588 2.613 2.875 2.895 3 3/8 19 0.204 0.234 0.125 0.156 0.280 0.300 2.443 2.463 3/64WTH-14 0.058 0.068 2.791 2.816 3.094 3.114 3 19/32 19 0.204 0.234 0.187 0.250 0.280 0.300 2.631 2.651 3/64WTH-15 0.058 0.068 2.973 3.003 3.375 3.395 3 59/64 19 0.297 0.327 0.187 0.250 0.280 0.300 2.813 2.833 3/64WTH-16 0.058 0.068 3.177 3.207 3.594 3.614 4 9/64 19 0.297 0.327 0.187 0.250 0.340 0.360 3.017 3.037 3/64WTH-17 0.058 0.068 3.395 3.425 3.812 3.832 4 23/64 19 0.297 0.327 0.187 0.250 0.340 0.360 3.220 3.240 3/64WTH-18 0.058 0.068 3.582 3.612 4.000 4.020 4 35/64 19 0.297 0.327 0.187 0.250 0.340 0.360 3.380 3.400 3/64


B ZMIN. MAX. MIN. MAX. MIN. MAX. +0 - 1/16 MIN. MAX. MIN. MAX. MIN. MAX. MIN. MAX.

WIN-01 0.046 0.054 0.797 0.828 1.188 1.203 1 9/16 9 0.178 0.198 0.125 0.156 0.168 0.188 0.687 0.712 1/64WIN-02 0.046 0.054 0.922 0.953 1.313 1.328 1 11/16 9 0.178 0.198 0.125 0.156 0.168 0.188 0.812 0.837 1/64WIN-03 0.046 0.054 1.047 1.078 1.438 1.453 1 13/16 11 0.178 0.198 0.125 0.156 0.168 0.188 0.937 0.962 1/64WIN-04 0.046 0.054 1.172 1.203 1.563 1.578 2 11 0.178 0.198 0.125 0.156 0.168 0.188 1.062 1.087 1/32WIN-05 0.046 0.054 1.297 1.328 1.688 1.703 2 1/8 11 0.178 0.198 0.125 0.156 0.168 0.188 1.187 1.212 1/32WIN-06 0.046 0.054 1.422 1.453 1.938 1.953 2 3/8 13 0.178 0.198 0.125 0.156 0.168 0.188 1.312 1.337 1/32WIN-07 0.046 0.054 1.547 1.578 1.938 1.953 2 3/8 13 0.178 0.198 0.125 0.156 0.168 0.188 1.437 1.462 1/32WIN-08 0.058 0.068 1.672 1.703 2.188 2.203 2 5/8 13 0.240 0.260 0.125 0.156 0.240 0.260 1.562 1.587 1/32WIN-09 0.058 0.068 1.797 1.828 2.313 2.328 2 3/4 15 0.240 0.260 0.125 0.156 0.240 0.260 1.687 1.712 1/32WIN-10 0.058 0.068 1.922 1.953 2.438 2.453 2 7/8 15 0.240 0.260 0.125 0.156 0.240 0.260 1.812 1.837 1/32WIN-11 0.058 0.068 2.047 2.078 2.688 2.703 3 1/8 15 0.240 0.260 0.125 0.156 0.240 0.260 1.937 1.962 1/32WIN-12 0.058 0.068 2.297 2.328 2.875 2.890 3 7/16 17 0.240 0.260 0.187 0.218 0.240 0.260 2.187 2.212 3/64WIN-13 0.058 0.068 2.547 2.578 3.125 3.140 3 11/16 17 0.240 0.260 0.187 0.218 0.240 0.260 2.437 2.462 3/64WIN-14 0.058 0.068 2.797 2.828 3.375 3.390 3 15/16 17 0.240 0.260 0.187 0.218 0.240 0.260 2.687 2.712 3/64

S XDIAMETER WIDTH PROJECTION WIDTH

Q R W T Y

THICKNESS BORE FACE TANGSCLEARANCE

KEY BENT

CLEARANCEQ R W T Y S X

DIAMETER WIDTH PROJECTION WIDTH

WIN-00 LOCKWASHER DIMENSIONS

KEY BENTWTH-00 LOCKWASHER DIMENSIONS

THICKNESS BORE FACE TANGS

41

MB-00 SERIES LOCKWASHER DIMENSIONS Metric

LOCKWASHERS

LOCKWASHER BORE FACE DIAMETER KEY INSIDE MATERIAL TANG NO. OFNO. DIAMETER OVER TANGS WIDTH DIMENSION THICKNESS WIDTH TANGS

R E B S X Q TNOM. MIN. MAX. MAX. NOM. NOM. MAX.

MB-0 0.394 0.532 0.827 0.118 0.335 0.039 0.118 9MB-1 0.472 0.669 0.984 0.118 0.413 0.039 0.118 11MB-2 0.591 0.827 1.102 0.157 0.532 0.039 0.157 11MB-3 0.669 0.945 1.260 0.157 0.610 0.039 0.157 11MB-4 0.787 1.024 1.417 0.157 0.728 0.039 0.157 11MB-4.4 0.866 1.102 1.496 0.157 0.807 0.039 0.157 11MB-5 0.984 1.260 1.654 0.197 0.906 0.049 0.197 13MB-5.6 1.102 1.417 1.811 0.197 1.024 0.049 0.197 13MB-6 1.181 1.496 1.929 0.197 1.083 0.049 0.197 13MB-6.4 1.260 1.575 2.047 0.197 1.161 0.049 0.197 15MB-7 1.378 1.732 2.244 0.236 1.280 0.049 0.197 13MB-8 1.575 1.968 2.241 0.236 1.476 0.049 0.236 13MB-9 1.772 2.205 2.717 0.236 1.673 0.049 0.236 13MB-10 1.968 2.402 2.913 0.236 1.870 0.049 0.236 13MB-11 2.165 2.638 3.189 0.315 2.067 0.059 0.276 17MB-12 2.362 2.874 3.386 0.315 2.264 0.059 0.276 17MB-13 2.559 3.110 3.622 0.315 2.461 0.059 0.276 17MB-14 2.756 3.346 3.858 0.315 2.618 0.059 0.315 17MB-15 2.953 3.543 4.094 0.315 2.815 0.059 0.315 17MB-16 3.150 3.740 4.409 0.394 3.012 0.071 0.315 17MB-17 3.346 4.016 4.685 0.394 3.209 0.071 0.315 17MB-18 3.543 4.252 4.961 0.394 3.406 0.071 0.394 17MB-19 3.740 4.449 5.236 0.394 3.602 0.071 0.394 17MB-20 3.937 4.724 5.591 0.472 3.799 0.071 0.394 17MB-21 4.134 4.961 5.709 0.472 3.957 0.071 0.472 17MB-22 4.331 5.236 6.063 0.472 4.154 0.071 0.472 17MB-23 4.528 5.394 6.260 0.472 4.350 0.079 0.472 17MB-24 4.724 5.433 6.457 0.551 4.528 0.079 0.472 17MB-25 4.921 5.827 6.693 0.551 4.724 0.079 0.472 17MB-26 5.118 5.866 6.890 0.551 4.921 0.079 0.472 17MB-27 5.315 6.299 7.283 0.551 5.118 0.079 0.551 17MB-28 5.512 6.299 7.559 0.630 5.315 0.079 0.551 17MB-29 5.709 6.732 7.953 0.630 5.512 0.079 0.551 17MB-30 5.906 6.732 8.071 0.630 5.709 0.079 0.551 17MB-31 6.102 7.165 8.346 0.630 5.807 0.098 0.630 19MB-32 6.299 7.165 8.543 0.709 6.063 0.098 0.630 19MB-33 6.496 7.598 8.740 0.709 6.201 0.098 0.630 19MB-34 6.693 7.598 9.134 0.709 6.457 0.098 0.630 19MB-36 7.087 7.992 9.528 0.787 6.850 0.098 0.709 19MB-38 7.480 8.425 9.921 0.787 7.244 0.098 0.709 19MB-40 7.874 8.898 10.315 0.787 7.638 0.098 0.709 19MB-44 8.661 9.843 11.496 0.945 8.368 0.118 0.787 19MB-48 9.449 10.630 12.283 0.945 9.173 0.118 0.787 19MB-52 10.236 11.811 13.465 1.102 9.961 0.118 0.945 19MB-56 11.024 12.598 14.252 1.102 10.748 0.118 0.945 19

MB-00 LOCKWASHER DIMENSIONS

P-000 SERIES LOCKPLATE DIMENSIONS For use with SNP-00 and SNP-3100 series adapters

LOCKPLATES

NOTES: MS-Series Metric Clamps are also available.

LOCKPLATE NO. CAPSCREW SIZE LOCKNUT NO.J2

P-48 5/16 -- 18 x 5/8 N-048P-52 5/16 -- 18 x 5/8 N-052P-56 5/16 -- 18 x 5/8 N-056P-60 3/8 -- 16 x 3/4 N-060P-64 3/8 -- 16 x 3/4 N-064P-68 3/8 -- 16 x 3/4 N-068P-72 3/8 -- 16 x 3/4 N-072P-76 1/2 -- 13 x 7/8 N-076P-80 1/2 -- 13 x 7/8 N-080P-84 1/2 -- 13 x 7/8 N-084P-88 5/8 -- 11 x 1 N-088P-92 5/8 -- 11 x 1 N-092P-96 5/8 -- 11 x 1 1/4 N-096

P-500 5/8 -- 11 x 1 1/4 N-500P-530 5/8 -- 11 x 1 1/4 N-530P-560 5/8 -- 11 x 1 1/4 N-560P-600 5/8 -- 11 x 1 1/4 N-600P-630 5/8 -- 11 x 1 1/4 N-630P-670 5/8 -- 11 x 1 1/4 N-670P-710 5/8 -- 11 x 1 1/4 N-710P-750 5/8 -- 11 x 1 1/4 N-750P-800 5/8 -- 11 x 1 1/4 N-800P-850 3/4 -- 10 x 1 1/2 N-850P-900 3/4 -- 10 x 1 1/2 N-900P-950 3/4 -- 10 x 1 1/2 N-950

LOCKPLATE DIMENSIONS

44

SAF 200 and 300 SERIES CAST IRON PILLOW BLOCKS STRAIGHT BORE MOUNTING

PILLOW BLOCKS

NOTES: Triple seal rings (LER series) and stabilizing ring (SR series) are included with the pillow block. Stabilizing ring used only for “fixed” mounting, not used for “free” mounting. Available in ductile iron as well (SAFD series) * Pillow blocks with 2-hole mounting base, all others have 4-hole mounting base.

PILLOW BLOCK STABILIZING LOCKNUT LOCKWASHER COMPLETE APP. WT.S-2 IN. S-3 IN. HOUSING ONLY RING S-2 SHAFT S-3 SHAFT NO. NO. PILLOW BLOCK (LB.)

1 REQUIRED 1 REQUIRED 1 REQUIRED NO.2 3/8 1 7/8 SAF210* SR-10-0 LER35 LER23 N10 W10 SAF22210 12 2 9/16 2 1/16 SAF211* SR-11-0 LER40 LER27 N11 W11 SAF22211 14 3 1/16 2 7/16 SAF213* SR-13-0 LER55 LER37 N13 W13 SAF22213 21 3 7/16 2 13/16 SAF215* SR-15-0 LER79 LER456 AN15 W15 SAF22215 24 3 7/16 2 13/16 FSAF215 SR-15-0 LER79 LER456 AN15 W15 SAF22215 24 3 5/8 3 SAF216* SR-16-13 LER82 LER54 AN16 W16 SAF22216 35 3 5/8 3 FSAF216 SR-16-13 LER82 LER54 AN16 W16 SAF22216 35 3 15/16 3 3/16 SAF 217* SR-17-14 LER89 LER63 AN17 W17 SAF22217 43 3 15/16 3 3/16 FSAF217 SR-17-14 LER89 LER63 AN17 W17 FSAF22217 43 4 1/8 3 3/8 SAF 218* SR-18-15 LER96 LER72 AN18 W18 SAF22218 50 4 1/8 3 3/8 FSAF218 SR-18-15 LER96 LER72 AN18 W18 FSAF22218 50 4 1/2 3 13/16 SAF220* SR-20-17 LER118 LER106 AN20 W20 SAF22220 71 4 1/2 3 13/16 FSAF220 SR-20-17 LER118 LER106 AN20 W20 FSAF22220 71 4 7/8 4 3/16 SAF222 SR-22-19 LER121 LER113 AN22 W22 SAF22222 81 5 5/16 4 9/16 SAF224 SR-24-20 LER127 LER119 AN24 W24 SAF22224 90 5 7/8 4 15/16 SAF226 SR-26-0 LER136 LER122 AN26 W26 SAF22226 127 6 1/4 5 5/16 SAF228 SR-28-0 LER144 LER127 AN28 W28 SAF22228 149 6 5/8 5 3/4 SAF230 SR-30-0 LER151 LER134 AN30 W30 SAF22230 175 7 6 1/16 SAF232 SR-32-0 LER156 LER142 AN32 W32 SAF22232 210 7 7/16 6 7/16 SAF234 SR-34-0 LER161 LER148 AN34 W34 SAF22234 280 7 13/16 6 7/8 SAF236 SR-36-30 LER165 LER154 AN36 W36 SAF22236 305 8 3/8 7 1/4 SAF238 SR-38-32 LER171 LER160 AN38 W38 SAF22238 350 8 3/4 7 5/8 SAF240 SR-40-34 LER175 LER164 AN40 W40 SAF22240 420 9 9/16 8 5/16 SAF244 SR-44-38 LER179 LER170 N44 W44 SAF22244 590

3 7/16 2 13/16 SAF315 SR-18-5 LER79 LER46 AN15 W15 SAF22315 53 3 15/16 3 3/16 SAF317* SR-20-17 LER109 LER188 AN17 W17 SAF22317 80 3 15/16 3 3/16 FSAF317 SR-20-17 LER109 LER188 AN17 W17 FSAF22317 80 4 1/8 3 3/8 SAF318 SR-21-18 LER112 LER191 AN18 W18 SAF22318 92 4 1/2 3 13/16 SAF320 SR-24-20 LER118 LER106 AN20 W20 SAF22320 109 4 7/8 4 3/16 SAF322 SR-0-22 LER121 LER113 AN22 W22 SAF22322 145 5 5/16 4 9/16 SAF324 SR-0-24 LER127 LER119 AN24 W24 SAF22324 195 5 7/8 4 15/16 SAF326 SR-0-26 LER136 LER122 AN26 W26 SAF22326 235 6 1/4 5 5/16 SAF328 SR-0-28 LER144 LER127 AN28 W28 SAF22328 300 6 5/8 5 3/4 SAF330 SR-36-30 LER151 LER134 AN30 W30 SAF22330 335 7 6 1/16 SAF332 SR-38-32 LER156 LER142 AN32 W32 SAF22332 105 7 7/16 6 7/16 SAF334 SR-40-34 LER161 LER148 AN34 W34 SAF22334 465 7 11/16 6 7/8 SAF336 SR-0-36 LER165 LER154 AN36 W36 SAF22336 525 8 3/8 7 1/4 SAF338 SR-44-38 LER171 LER160 AN38 W38 SAF22338 635 8 3/4 7 5/8 SAF340 SR-0-40 LER175 LER164 AN40 W40 SAF22340 700

SAF-300 SERIES

SAF-200 SERIES SHAFT DIA. TRIPLE SEAL

46

SAF 200 and 300 SERIES CAST IRON PILLOW BLOCKS STRAIGHT BORE MOUNTING

PILLOW BLOCKS

PILLOW BLOCKHOUSING ONLY A B C D F H L NO. SIZE

MAX. MIN.SAF210 2 1/2 8 1/4 2 3/8 15/16 7 6 1/2 --- 4 11/16 3 7/16 2 7/16SAF211 2 3/4 9 5/8 2 3/4 15/16 7 7/8 7 3/8 --- 5 1/32 3 3/4 2 5/8 SAF213 3 11 3 1/8 1 9 1/2 8 1/8 --- 5 25/32 4 5/16 2 5/8 SAF215 3 1/4 11 1/4 3 1/8 1 1/8 9 5/8 8 5/8 --- 6 3/8 4 3/4 2 5/8 FSAF215 3 1/4 11 1/4 3 1/8 1 1/8 9 5/8 8 5/8 1 7/8 6 3/8 4 3/4 4 1/2 SAF216 3 1/2 13 3 1/2 1 3/16 11 9 5/8 --- 6 7/8 4 7/8 2 3/4 FSAF216 3 1/2 13 3 1/2 1 3/16 11 9 5/8 2 1/8 6 7/8 4 7/8 4 5/8 SAF217 3 3/4 13 3 1/2 1 1/4 11 9 7/8 --- 7 1/4 4 7/8 2 3/4 FSAF217 3 3/4 13 3 1/2 1 1/4 11 9 7/8 2 1/8 7 1/4 4 7/8 4 5/8 SAF218 4 13 3/4 3 7/8 1 1/2 11 5/8 10 3/8 --- 7 3/4 6 1/8 2 3/4 FSAF218 4 13 3/4 3 7/8 1 1/2 11 5/8 10 3/8 2 1/8 7 3/4 6 1/8 4 5/8 SAF220 4 1/2 15 1/4 4 3/8 1 3/4 13 1/8 11 5/8 --- 8 11/16 5 7/8 2 7/8 FSAF220 4 1/2 15 1/4 4 3/8 1 11/16 13 1/8 11 5/8 2 3/8 8 11/16 5 7/8 4 3/4 SAF222 4 15/16 16 1/2 4 3/4 2 14 7/16 12 11/16 2 3/4 9 9/16 6 1/4 4 3/4 SAF224 5 1/4 16 1/2 4 3/4 2 1/8 14 1/2 13 1/4 2 3/4 10 1/4 7 1/4 4 3/4 SAF226 6 18 3/8 5 1/8 2 3/8 16 14 5/8 3 1/4 11 9/16 7 7/8 4 7/8 SAF228 6 20 1/8 5 7/8 2 3/8 17 1/8 16 3 3/8 11 3/4 7 5/8 4 1 SAF230 6 5/16 21 1/4 6 1/4 2 1/2 18 1/4 17 3 3/4 12 1/2 8 1/4 4 1 SAF232 6 11/16 22 6 1/4 2 5/8 19 1/4 17 3/8 3 3/4 13 5/16 8 5/8 4 1 SAF234 7 1/16 24 3/4 6 3/4 2 13/16 21 5/8 19 3/8 4 1/4 14 9/16 9 1/4 4 1 SAF236 7 1/2 26 3/4 7 1/8 3 23 5/8 20 7/8 4 5/8 15 1/2 9 11/16 4 1 SAF238 7 7/8 28 7 1/2 3 1/8 24 3/8 21 5/8 4 1/2 15 11/16 10 5/8 4 1 1/4 SAF240 8 1/4 29 1/2 8 3 3/8 25 22 1/2 5 17 3/16 10 13/16 4 1 1/4 SAF244 9 1/2 32 3/4 8 3/4 3 3/4 27 7/8 24 3/4 5 1/4 19 5/8 11 1/2 4 1 1/2

SAF315 4 13 3/4 3 7/8 1 5/16 11 5/8 10 3/8 --- 7 13/16 6 1/8 2 5/8 SAF317 4 1/2 15 1/4 4 3/8 1 3/4 13 1/8 11 5/8 --- 8 11/16 6 5/8 2 7/8 FSAF317 4 1/2 15 1/4 4 3/8 1 3/4 13 1/8 11 5/8 2 3/8 8 11/16 6 5/8 4 3/4 SAF318 4 3/4 15 1/2 4 3/8 2 13 1/2 12 2 1/4 9 3/16 6 7/8 4 3/4 SAF320 5 1/4 16 1/2 4 3/4 2 1/8 14 1/2 13 1/4 2 3/4 10 1/4 7 1/4 4 3/4 SAF322 6 18 3/8 5 1/8 2 3/8 16 14 5/8 3 1/4 11 9/16 7 7/8 4 7/8 SAF324 6 5/16 21 1/4 6 1/4 2 1/2 18 1/4 17 3 3/4 12 1/2 8 1/4 4 1 SAF326 6 11/16 22 6 1/4 2 5/8 19 1/4 17 3/8 3 3/4 13 5/16 8 5/8 4 1 SAF328 7 1/16 24 3/4 6 3/4 2 1/4 21 5/8 19 3/8 4 1/4 14 9/16 9 1/4 4 1 SAF330 7 1/2 26 3/4 7 1/8 3 23 5/8 20 7/8 4 5/8 15 1/2 9 11/16 4 1 SAF332 7 7/8 28 7 1/2 3 1/8 24 3/8 21 5/8 4 1/2 15 11/16 10 5/8 4 1 1/4 SAF334 8 1/4 29 1/2 8 3 3/8 25 22 1/2 5 17 3/16 10 13/16 4 1 1/4 SAF336 8 7/8 31 1/4 8 1/4 3 1/2 26 5/8 24 5 1/4 18 1/2 11 1/4 4 1 1/4 SAF338 9 1/2 32 3/4 8 3/4 3 3/4 28 1/8 24 3/4 5 1/4 19 5/8 11 1/2 4 1 1/2 SAF340 9 7/8 34 1/4 9 4 3/32 29 1/2 26 1/4 5 1/2 20 3/16 12 1/4 4 1 1/2

SAF-300 SERIES

SAF-200 SERIESBASE BOLTS REQUIRED

E

47

SAF 500 and 600 SERIES CAST IRON PILLOW BLOCKS TAPERED BORE/ADAPTER MOUNTING

PILLOW BLOCKS

NOTES: Triple seal rings (LER series) and stabilizing ring (SR series) are included with the pillow block. Stabilizing ring used only for “fixed” mounting, not used for “free” mounting. Available in ductile iron as well (SAFD series) * Pillow blocks with 2-hole mounting base, all others have 4-hole mounting base. ** 2-Bolt cap and 2-bolt base.

SHAFT DIA. PILLOW BLOCK STABILIZING TRIPLE SEAL COMPLETE ADAPTER APP. WT.S-1 IN. HOUSING ONLY RING PILLOW BLOCK NO. (LB.)

1 REQUIRED 2 REQUIRED NO.1 11/16 SAF510** SR-10-8 LER20 SAF22510 SNW-10 12 1 15/16 SAF511** SR-11-0 LER24 SAF22511 SNW-11 14 2 3/16 SAF513** SR-13-0 LER29 SAF22513 SNW-13 21 2 7/16 SAF515* SR-15-0 LER37 SAF22515 SNW-15 24 2 7/16 FSAF515 SR-15-0 LER37 FSAF22515 SNW-15 32 2 11/16 SAF516* SR-16-13 LER44 SAF22516 SNW-16 37 2 11/16 FSAF516 SR-16-13 LER44 FSAF22516 SNW-16 37 2 15/16 SAF517* SR-17-14 LER53 SAF22517 SNW-17 40 2 15/16 FSAF517 SR-17-14 LER53 FSAF22517 SNW-17 40 3 3/16 SAF518* SR-18-15 LER69 SAF22518 SNW-18 49 3 3/16 FSAF518 SR-18-15 LER69 FSAF22518 SNW-18 49 3 7/16 SAF520* SR-20-17 LER102 SAF22520 SNW-20 65 3 7/16 FSAF520 SR-20-17 LER102 FSAF22520 SNW-20 65 3 15/16 SAF522 SR-22-19 LER109 SAF22522 SNW-22 81 4 3/16 SAF524 SR-24-20 LER113 SAF22524 SNW-24 94 4 7/16 SAF526 SR-26-0 LER117 SAF22526 SNW-26 137 4 15/16 SAF528 SR-28-0 LER122 SAF22528 SNW-28 159 5 3/16 SAF530 SR-30-0 LER125 SAF22530 SNW-30 189 5 7/16 SAF532 SR-32-0 LER130 SAF22532 SNW-32 225 5 15/16 SAF534 SR-34-0 LER140 SAF22534 SNW-34 300 6 7/16 SAF536 SR-36-30 LER148 SAF22536 SNW-36 330 6 15/16 SAF538 SR-38-32 LER155 SAF22538 SNW-38 375 7 3/16 SAF540 SR-40-34 LER159 SAF22540 SNW-40 445 7 15/16 SAF544 SR-44-38 LER167 SAF22544 SNW-44 615

2 7/16 SAF615 SR-18-15 LER37 SAF22615 SNW-115 55 2 15/16 SAF617* SR-20-17 LER184 SAF22617 SNW-117 81 2 15/16 FSAF617 SR-20-17 LER184 FSAF22617 SNW-117 81 3 3/16 SAF618 SR-21-18 LER188 SAF22618 SNW-118 90 3 7/16 SAF620 SR-24-20 LER102 SAF22620 SNW-120 113 3 15/16 SAF622 SR-0-22 LER109 SAF22622 SNW-122 151 4 3/16 SAF624 SR-0-24 LER113 SAF22624 SNW-124 201 4 7/16 SAF626 SR-0-26 LER117 SAF22626 SNW-126 245 4 15/16 SAF628 SR-0-28 LER122 SAF22628 SNW-128 310 5 3/16 SAF630 SR-36-30 LER125 SAF22630 SNW-130 350 5 7/16 SAF632 SR-38-32 LER130 SAF22632 SNW-132 420 5 15/16 SAF634 SR-40-34 LER140 SAF22634 SNW-134 485 6 7/16 SAF636 SR-0-36 LER148 SAF22636 SNW-136 545 6 15/16 SAF638 SR-44-38 LER155 SAF22638 SNW-138 665 7 3/16 SAF640 SR-0-40 LER159 SAF22640 SNW-140 725

SAF-500 SERIES

SAF-600 SERIES

48

SAF 500 and 600 SERIES CAST IRON PILLOW BLOCKS

TAPERED BORE/ADAPTER MOUNTING

PILLOW BLOCKS


MAX. MIN.SAF510** 2 1/2 8 1/4 2 3/8 15/16 7 6 1/2 -- 4 11/16 3 7/16 2 7/16SAF511** 2 3/4 9 5/8 2 3/4 15/16 7 7/8 7 3/8 -- 5 1/32 3 3/4 2 5/8 SAF513** 3 11 3 1/8 1 9 1/2 8 1/8 -- 5 25/32 4 5/16 2 5/8 SAF515* 3 1/4 11 1/4 3 1/8 1 1/8 9 5/8 8 5/8 -- 6 3/8 4 3/4 2 5/8 FSAF515 3 1/4 11 1/4 3 1/8 1 1/8 9 5/8 8 5/8 1 7/8 6 3/8 4 3/4 4 1/2 SAF516* 3 1/2 13 3 1/2 1 3/16 11 9 5/8 -- 6 7/8 4 7/8 2 3/4 FSAF516 3 1/2 13 3 1/2 1 3/16 11 9 5/8 2 1/8 6 7/8 4 7/8 4 5/8 SAF517* 3 3/4 13 3 1/2 1 1/4 11 9 7/8 -- 7 1/4 4 7/8 2 3/4 FSAF517 3 3/4 13 3 1/2 1 1/4 11 9 7/8 2 1/8 7 1/4 4 7/8 4 5/8 SAF518* 4 13 3/4 3 7/8 1 1/2 11 5/8 10 3/8 -- 7 3/4 6 1/8 2 3/4 FSAF518 4 13 3/4 3 7/8 1 1/2 11 5/8 10 3/8 2 1/8 7 3/4 6 1/8 4 5/8 SAF520* 4 1/2 15 1/4 4 3/8 1 3/4 13 1/8 11 5/8 -- 8 11/16 5 7/8 2 7/8 FSAF520 4 1/2 15 1/4 4 3/8 1 11/16 13 1/8 11 5/8 2 3/8 8 11/16 5 7/8 4 3/4 SAF522 4 15/16 16 1/2 4 3/4 2 14 7/16 12 11/16 2 3/4 9 9/16 6 1/4 4 3/4 SAF524 5 1/4 16 1/2 4 3/4 2 1/8 14 1/2 13 1/4 2 3/4 10 1/4 7 1/4 4 3/4 SAF526 6 18 3/8 5 1/8 2 3/8 16 14 5/8 3 1/4 11 9/16 7 7/8 4 7/8 SAF528 6 20 1/8 5 7/8 2 3/8 17 1/8 16 3 3/8 11 3/4 7 5/8 4 1 SAF530 6 5/16 21 1/4 6 1/4 2 1/2 18 1/4 17 3 3/4 12 1/2 8 1/4 4 1 SAF532 6 11/16 22 6 1/4 2 5/8 19 1/4 17 3/8 3 3/4 13 5/16 8 5/8 4 1 SAF534 7 1/16 24 3/4 6 3/4 2 13/16 21 5/8 19 3/8 4 1/4 14 9/16 9 1/4 4 1 SAF536 7 1/2 26 3/4 7 1/8 3 23 5/8 20 7/8 4 5/8 15 1/2 9 11/16 4 1 SAF538 7 7/8 28 7 1/2 3 1/8 24 3/8 21 5/8 4 1/2 15 11/16 10 5/8 4 1 1/4 SAF540 8 1/4 29 1/2 8 3 3/8 25 22 1/2 5 17 3/16 10 5/8 4 1 1/4 SAF544 9 1/2 32 3/4 8 3/4 3 3/4 27 7/8 24 3/4 5 1/4 19 5/8 11 1/2 4 1 1/2

SAF615 4 13 3/4 3 7/8 1 5/16 11 5/8 10 3/8 -- 7 13/16 6 1/8 2 5/8 SAF617* 4 1/2 15 1/4 4 3/8 1 3/4 13 1/8 11 5/8 -- 8 11/16 6 5/8 2 7/8 FSAF617 4 1/2 15 1/4 4 3/8 1 3/4 13 1/8 11 5/8 2 3/8 8 11/16 6 5/8 4 3/4 SAF618 4 3/4 15 1/2 4 3/8 2 13 1/2 12 2 1/4 9 3/16 6 7/8 4 3/4 SAF620 5 1/4 16 1/2 4 3/4 2 1/8 14 1/2 13 1/4 2 3/4 10 1/4 7 1/4 4 3/4 SAF622 6 18 3/8 5 1/8 2 3/8 16 14 5/8 3 1/4 11 9/16 7 7/8 4 7/8 SAF624 6 5/16 21 1/4 6 1/4 2 1/2 18 1/4 17 3 3/4 12 1/2 8 1/4 4 1 SAF626 6 11/16 22 6 1/4 2 5/8 19 1/4 17 3/8 3 3/4 13 5/16 8 5/8 4 1 SAF628 7 1/16 24 3/4 6 3/4 2 3/4 21 5/8 19 3/8 4 1/4 14 9/16 9 1/4 4 1 SAF630 7 1/2 26 3/4 7 1/8 3 23 5/8 20 7/8 4 5/8 15 1/2 9 11/16 4 1 SAF632 7 7/8 28 7 1/2 3 1/8 24 3/8 21 5/8 4 1/2 15 11/16 10 5/8 4 1 1/4 SAF634 8 1/4 29 1/2 8 3 3/8 25 22 1/2 5 17 3 /16 10 13/16 4 1 1/4 SAF636 8 7/8 31 1/4 8 1/4 3 1/2 26 5/8 24 5 1/4 18 1/2 11 1/4 4 1 1/4 SAF638 9 1/2 32 3/4 8 3/4 3 3/4 27 7/8 24 1/4 5 1/4 19 5/8 11 1/2 4 1 1/2 SAF640 9 7/8 34 1/4 9 4 3/32 29 1/2 26 1/4 5 1/2 20 3/16 12 1/4 4 1 1/2

SAF-600 SERIES

SAF-500 SERIES BASE BOLTS REQUIRED

E

49

SAF 230 SERIES CAST IRON PILLOW BLOCKS TAPERED BORE/ADAPTER MOUNTING Large Bore

PILLOW BLOCKS

NOTES: Triple seal rings (LER series) and stabilizing ring (SR series) are included with the pillow block. Stabilizing ring used only for “fixed” mounting, not used for “free” mounting. * Pillow blocks with 2-hole mounting base, all others have 4-hole mounting base.

SHAFT DIA. PILLOW BLOCK SHAFT STABILIZING TRIPLE SEAL COMPLETE ADAPTER APP. WT.S-1 IN. HOUSING ONLY DIA. RING PILLOW BLOCK NO. (LB.)

1 REQUIRED 2 REQUIRED NO.4 3/16 SAF024 SR-20-17 LER113 SAF23024 SNW-3024 60 4 7/16 SAF026 SR-22-19 LER117 SAF23026 SNW-3026 76 4 15/16 SAF028 SR-0-20 LER122 SAF23028 SNW-3028 90 5 7/16 SAF032 SR-0-22 LER130 SAF23032 SNW-3032 132 6 15/16 SAF038 SR-32-0 LER155 SAF23038 SNW-3038 220 7 3/16 SAF040 SR-34-0 LER159 SAF23040 SNW-3040 295 7 15/16 SAF044 SR-38-32 LER167 SAF23044 SNW-3044 370 8 7/16 SAF048 8 7/16 A8897 LER526 SAF23048 SNP-3048 430 8 1/2 SAF048 8 1/2 A8897 LER527 SAF23048 SNP-3048 428 8 15/16 SAF048 8 15/16 A8897 LER529 SAF23048 SNP-3048 422 9 SAF048 9 A8897 LER530 SAF23048 SNP-3048 420 9 7/16 SAF052 9 7/16 A8898 LER178-1 SAF23052 SNP-3052 587 9 1/2 SAF052 9 1/2 A8898 LER178 SAF23052 SNP-3052 585 9 15/16 SAF056 9 15/16 A8819 ER751 SAF23056 SNP-3056 640 10 SAF056 10 A8819 ER705 SAF23056 SNP-3056 635 10 7/16 SAF056 10 7/16 A8819 ER745 SAF23056 SNP-3056 625 10 1/2 SAF056 10 1/2 A8819 ER710 SAF23056 SNP-3056 620

SAF-230 SERIES

50

SAF 230 SERIES CAST IRON PILLOW BLOCKS

TAPERED BORE/ADAPTER MOUNTING

PILLOW BLOCKS

PILLOW BLOCK SHAFTHOUSING ONLY DIA. A B C D F H L NO. SIZE

MAX. MIN.SAF024 4 1/2 15 1/4 4 3/8 1 3/4 13 1/8 11 5/8 2 3/8 8 11/16 5 7/8 4 3/4 SAF026 4 15/16 16 1/2 4 3/4 2 14 7/16 12 5/8 2 3/4 9 9/16 6 1/4 4 3/4 SAF028 5 1/4 16 1/2 4 3/4 2 1/8 14 1/2 13 1/4 2 3/4 10 1/4 7 1/4 4 3/4 SAF032 6 18 3/8 5 1/8 2 3/8 16 14 5/8 3 1/4 11 9/16 7 7/8 4 7/8 SAF038 6 11/16 22 6 1/4 2 5/8 19 1/4 17 3/8 3 3/4 13 5/16 8 5/8 4 1 SAF040 7 1/16 24 3/4 6 3/4 2 13/16 21 5/8 19 3/8 4 1/2 14 9/16 9 1/4 4 1 SAF044 7 7/8 28 7 1/2 3 1/8 24 3/8 21 5/8 4 1/2 15 11/16 10 5/8 4 SAF048 8 7/16 8 1/4 29 1/2 8 3 3/8 25 22 1/2 5 17 3/16 10 13/16 4 1 1/4 SAF048 8 1/2 8 1/4 29 1/2 8 3 3/8 25 22 1/2 5 17 3/16 10 13/16 4 1 1/4 SAF048 8 15/16 8 1/4 29 1/2 8 3 3/8 25 22 1/2 5 17 3/16 10 13/16 4 1 1/4 SAF048 9 8 1/4 29 1/2 8 3 3/8 25 22 1/2 5 17 3/16 10 13/16 4 1 1/4 SAF052 9 7/16 9 1/2 32 3/4 8 3/4 3 3/4 27 7/8 24 3/4 5 1/4 19 5/8 11 1/2 4 1 1/2 SAF052 9 1/2 9 1/2 32 3/4 8 3/4 3 3/4 27 7/8 24 3/4 5 1/4 19 5/8 11 1/2 4 1 1/2 SAF056 9 15/16 9 7/8 34 1/4 9 4 3/32 29 1/2 26 1/4 5 1/2 20 3/16 12 1/4 4 1 1/2 SAF056 10 9 7/8 34 1/4 9 4 3/32 29 1/2 26 1/4 5 1/2 20 3/16 12 1/4 4 1 1/2 SAF056 10 7/16 9 7/8 34 1/4 9 4 3/32 29 1/2 26 1/4 5 1/2 20 3/16 12 1/4 4 1 1/2 SAF056 10 1/2 9 7/8 34 1/4 9 4 3/32 29 1/2 26 1/4 5 1/2 20 3/16 12 1/4 4 1 1/2

SAF-230 SERIES BASE BOLTS REQUIRED

E

51

SAFS 200 AND 500 SERIES CAST STEEL PILLOW BLOCKS STRAIGHT BORE MOUNTING and TAPERED BORE/ADAPTER MOUNTING

PILLOW BLOCKS

NOTES: Triple seal rings (LER series) and stabilizing ring (SR series) are included with the pillow block. Stabilizing ring used only for “fixed” mounting, not used for “free” mounting. * Pillow blocks with 2-hole mounting base, all others have 4-hole mounting base.

PILLOW BLOCK STABILIZING LOCKNUT LOCKWASHER COMPLETE APP. WT. S-2 IN. S-3 IN. HOUSING ONLY RING S-2 SHAFT S-3 SHAFT NO. NO. PILLOW BLOCK (LB.)

1 REQUIRED 1 REQUIRED 1 REQUIRED NO.3 15/16 3 3/16 SAFS217* SR-17-14 LER89 LER63 AN17 W17 SAFS22217 43 3 15/16 3 3/16 FSAFS217 SR-17-14 LER89 LER63 AN17 W17 FSAFS22217 43 4 1/8 3 3/8 SAFS218* SR-18-15 LER96 LER72 AN18 W18 SAFS22218 50 4 1/8 3 3/8 FSAFS218 SR-18-15 LER96 LER72 AN18 W18 FSAFS22218 50 4 1/2 3 13/16 SAFS220* SR-20-17 LER118 LER106 AN20 W20 SAFS22220 71 4 1/2 3 13/16 FSAFS220 SR-20-17 LER118 LER106 AN20 W20 FSAFS22220 71 4 7/8 4 3/16 SAFS222 SR-22-19 LER121 LER113 AN22 W22 SAFS22222 81 5 5/16 4 9/16 SAFS224 SR-24-20 LER127 LER119 AN24 W24 SAFS22224 90 5 7/8 4 15/16 SAFS226 SR-26-0 LER136 LER122 AN26 W26 SAFS22226 127 6 1/4 5 5/16 SAFS228 SR-28-0 LER144 LER127 AN28 W28 SAFS22228 149 6 5/8 5 3/4 SAFS230 SR-30-0 LER151 LER134 AN30 W30 SAFS22230 175 7 6 1/16 SAFS232 SR-32-0 LER156 LER142 AN32 W32 SAFS22232 210 7 7/16 6 7/16 SAFS234 SR-34-0 LER161 LER148 AN34 W34 SAFS22234 280 7 13/16 6 7/8 SAFS236 SR-36-30 LER165 LER154 AN36 W36 SAFS22236 305 8 3/8 7 1/4 SAFS238 SR-38-32 LER171 LER160 AN38 W38 SAFS22238 350 8 3/4 7 5/8 SAFS240 SR-40-34 LER175 LER164 AN40 W40 SAFS22240 420 9 9/16 8 5/16 SAFS244 SR-44-38 LER179 LER170 N44 W44 SAFS22244 590

S-1 IN. 2 REQUIRED ADAPTER NO.2 7/16 SAFS515* SR-15-0 LER37 SNW-15 SAFS22515 30 2 7/16 FSAFS515 SR-15-0 LER37 SNW-15 FSAFS22515 30 2 11/16 SAFS516* SR-16-13 LER44 SNW-16 SAFS22516 37 2 11/16 FSAFS516 SR-16-13 LER44 SNW-16 FSAFS22516 37 2 15/16 SAFS517* SR-17-14 LER53 SNW-17 SAFS22517 40 2 15/16 FSAFS517 SR-17-14 LER53 SNW-17 FSAFS22517 40 3 3/16 SAFS518* SR-18-15 LER69 SNW-18 SAFS22518 49 3 3/16 FSAFS518 SR-18-15 LER69 SNW-18 FSAF22518 49 3 7/16 SAFS520* SR-20-17 LER102 SNW-20 SAFS22520 65 3 7/16 FSAFS520 SR-20-17 LER102 SNW-20 FSAFS22520 65 3 15/16 SAFS522 SR-22-19 LER109 SNW-22 SAFS22522 81 4 3/16 SAFS524 SR-24-20 LER113 SNW-24 SAFS22524 94 4 7/16 SAFS526 SR-26-0 LER117 SNW-26 SAFS22526 137 4 15/16 SAFS528 SR-28-0 LER122 SNW-28 SAFS22528 159 5 3/16 SAFS530 SR-30-0 LER125 SNW-30 SAFS22530 189 5 7/16 SAFS532 SR-32-0 LER130 SNW-32 SAFS22532 225 5 15/16 SAFS534 SR-34-0 LER140 SNW-34 SAFS22534 300 6 7/16 SAFS536 SR-36-30 LER148 SNW-36 SAFS22536 330 6 15/16 SAFS538 SR-38-32 LER155 SNW-38 SAFS22538 375 7 3/16 SAFS540 SR-40-34 LER159 SNW-40 SAFS22540 445 7 15/16 SAFS544 SR-44-34 LER167 SNW-44 SAFS22544 615

SAFS-500 ADAPTER MOUNTING

SAFS-200 SERIES STRAIGHT BORE MOUNTING SHAFT DIA. TRIPLE SEAL

52

SAFS 200 AND 500 SERIES CAST STEEL PILLOW BLOCKS

STRAIGHT BORE MOUNTING and TAPERED BORE/ADAPTER MOUNTING

PILLOW BLOCKS


MAX. MIN.SAFS217* 3 3/4 13 3 1/2 1 3/16 11 9 7/8 --- 7 3/8 4 15/16 2 3/4 FSAFS217 3 3/4 13 3 1/2 1 3/16 11 9 7/8 2 1/8 7 3/8 4 15/16 4 5/8 SAFS218* 4 13 3/4 3 7/8 1 5/16 11 5/8 10 3/8 --- 7 3/4 5 5/8 2 3/4 FSAFS218 4 13 3/4 3 7/8 1 5/16 11 5/8 10 3/8 2 1/8 7 3/4 5 5/8 4 5/8 SAFS220* 4 1/2 15 1/4 4 3/8 1 3/4 13 1/8 11 5/8 --- 8 11/16 5 7/8 2 7/8 FSAFS220 4 1/2 15 1/4 4 3/8 1 3/4 13 1/8 11 5/8 2 3/8 8 11/16 5 7/8 4 3/4 SAFS222 4 15/16 16 1/2 4 3/4 1 29/32 14 1/2 12 5/8 2 3/4 9 5/8 6 1/4 4 3/4 SAFS224 5 1/4 16 1/2 4 3/4 2 1/8 14 1/2 13 1/4 2 3/4 10 1/4 7 1/8 4 3/4 SAFS226 6 18 3/8 5 1/8 2 9/32 16 14 5/8 3 1/4 11 1/2 7 3/4 4 7/8 SAFS228 6 20 1/8 5 7/8 2 13/32 17 1/8 16 3 3/8 11 3/4 7 3/8 4 1 SAFS230 6 5/16 21 1/4 6 1/4 2 13/32 18 1/4 17 3 3/4 12 1/2 8 1/8 4 1 SAFS232 6 11/16 22 6 1/4 2 5/8 19 1/4 17 3/8 3 3/4 13 5/16 8 1/2 4 1 SAFS234 7 1/16 24 3/4 6 3/4 2 3/4 21 5/8 19 3/8 4 1/4 14 3/16 9 3/8 4 1 SAFS236 7 1/2 26 3/4 7 1/8 3 23 5/8 20 7/8 4 5/8 14 7/8 10 4 1 SAFS238 7 7/8 28 7 1/2 3 1/8 24 3/8 21 5/8 4 1/2 15 11/16 10 1/2 4 1 1/4 SAFS240 8 1/4 29 1/2 8 3 3/8 25 22 1/2 5 17 3/16 11 4 1 1/4 SAFS244 9 1/2 32 3/4 8 3/4 3 3/4 27 7/8 24 3/4 5 1/4 19 5/8 11 5/8 4 1 1/2

SAFS515* 3 1/8 11 1/4 3 1/8 1 1/8 9 5/8 8 5/8 --- 6 3/8 4 11/16 2 5/8 FSAFS515 3 1/8 11 1/4 3 1/8 1 1/8 9 5/8 8 5/8 1 7/8 6 3/8 4 11/16 4 1/2 SAFS516* 3 1/2 13 3 1/2 1 1/4 11 9 5/8 --- 6 7/8 4 53/64 2 3/4 FSAFS516 3 1/2 13 3 1/2 1 1/4 11 9 5/8 2 1/8 6 7/8 4 53/64 4 5/8 SAFS517* 3 7/8 13 3 1/2 1 3/16 11 9 7/8 --- 7 3/8 4 13/16 2 3/4 FSAFS517 3 7/8 13 3 1/2 1 3/16 11 9 7/8 2 1/8 7 3/8 4 13/16 4 5/8 SAFS518* 4 13 3/4 3 7/8 1 5/16 11 5/8 10 3/8 --- 7 3/4 5 5/8 2 7/8 FSAFS518 4 13 3/4 3 7/8 1 5/16 11 5/8 10 3/8 2 1/8 7 3/4 5 5/8 4 3/4 SAFS520* 4 1/2 15 1/4 4 3/8 1 3/4 13 1/8 11 5/8 --- 8 11/16 5 7/8 2 3/4 FSAFS520 4 1/2 15 1/4 4 3/8 1 3/4 13 1/8 11 5/8 2 3/8 8 11/16 5 7/8 4 3/4 SAFS522 4 15/16 16 1/2 4 3/4 1 29/32 14 1/2 12 5/8 2 3/4 9 5/8 6 1/4 4 7/8 SAFS524 5 1/4 16 1/2 4 3/4 2 1/8 14 1/2 13 1/4 2 3/4 10 1/4 7 1/8 4 1 SAFS526 6 18 3/8 5 1/8 2 9/32 16 14 5/8 3 1/4 11 1/2 7 1/2 4 1 SAFS528 6 20 1/8 5 7/8 2 13/32 17 1/8 16 3 3/8 11 3/4 7 3/8 4 1 SAFS530 6 5/16 21 1/4 6 1/4 2 13/32 18 1/4 17 3 3/4 12 1/2 8 1/8 4 1 SAFS532 6 11/16 22 6 1/4 2 5/8 19 1/4 17 3/8 3 3/4 13 5/16 8 1/2 4 1 SAFS534 7 1/16 24 3/4 6 3/4 2 3/4 21 5/8 19 3/8 4 1/4 14 3/16 9 3/8 4 1 SAFS536 7 1/2 26 3/4 7 1/8 3 23 5/8 20 7/8 4 5/8 14 7/8 10 4 1 SAFS538 7 1/8 28 7 1/2 3 1/8 24 3/8 21 5/8 4 1/2 15 11/16 10 1/2 4 1 1/4 SAFS540 8 1/4 29 1/2 8 3 3/8 25 22 1/2 5 16 1/2 11 4 1 1/4 SAFS544 9 1/2 32 3/4 8 3/4 3 3/4 27 7/8 24 3/4 5 1/4 18 5/8 11 5/8 4 1 1/2

E

SAFS-500 ADAPTER MOUNTING

SAFS-200 SERIES STRAIGHT BORE MOUNTING BASE BOLTS REQUIRED

53

MS-1722 SERIES LOCKNUT DIMENSIONS

MS-1722 SERIES LOCKNUTS

LOCKNUT APP. WT.NO. MAJOR DIA. NO. PER INCH (LB.)

MIN. MIN. MAX. MIN. MAX. MIN. MAX. MIN. MAX. MIN. MAX.MS172236 0.391 32 0.704 0.724 0.173 0.193 0.511 0.531 0.584 0.604 0.115 0.135 0.010MS172237 0.469 32 0.797 0.817 0.173 0.193 0.605 0.625 0.678 0.698 0.115 0.135 0.014MS172238 0.586 32 0.923 0.943 0.209 0.229 0.730 0.750 0.802 0.822 0.115 0.135 0.021MS172239 0.664 32 1.407 1.067 0.209 0.229 0.855 0.875 0.928 0.948 0.115 0.135 0.028MS172259 0.781 32 1.173 1.193 0.240 0.260 0.980 1.000 1.052 1.072 0.178 0.198 0.036MS172241 0.969 32 1.360 1.380 0.240 0.260 1.168 1.188 1.240 1.260 0.178 0.198 0.045MS172242 1.173 18 1.673 1.693 0.271 0.291 1.418 1.438 1.490 1.510 0.178 0.198 0.055MS172243 1.376 18 1.891 1.911 0.271 0.291 1.636 1.656 1.709 1.729 0.178 0.198 0.067MS172244 1.563 18 2.079 2.099 0.271 0.291 1.824 1.844 1.896 1.916 0.240 0.260 0.074MS172245 1.767 18 2.297 2.317 0.302 0.322 2.042 2.062 2.115 2.135 0.240 0.260 0.134MS172246 1.967 18 2.485 2.505 0.302 0.322 2.230 2.250 2.302 2.322 0.240 0.260 0.144MS172247 2.157 18 2.735 2.755 0.302 0.322 2.480 2.500 2.552 2.572 0.240 0.260 0.180MS172248 2.360 18 2.923 2.943 0.334 0.354 2.668 2.688 2.740 2.760 0.240 0.260 0.211MS172249 2.548 18 3.110 3.130 0.334 0.354 2.855 2.875 2.928 2.948 0.240 0.260 0.224MS172250 2.751 18 3.329 3.349 0.334 0.354 3.074 3.094 3.146 3.166 0.240 0.260 0.232MS172251 2.933 12 3.673 3.693 0.365 0.385 3.355 3.375 3.428 3.448 0.365 0.385 0.371MS172252 3.137 12 3.891 3.911 0.365 0.385 3.574 3.594 3.646 3.666 0.365 0.385 0.405MS172253 3.340 12 4.110 4.130 0.365 0.385 3.792 3.812 3.865 3.885 0.365 0.385 0.440MS172254 3.527 12 4.297 4.317 0.365 0.385 3.980 4.000 4.052 4.072 0.365 0.385 0.464MS172255 3.730 12 4.516 4.536 0.396 0.416 4.199 4.219 4.271 4.291 0.365 0.385 0.546MS172256 3.918 12 4.704 4.724 0.396 0.416 4.386 4.406 4.459 4.479 0.365 0.385 0.572MS172257 4.122 12 4.891 4.911 0.396 0.416 4.574 4.594 4.646 4.666 0.490 0.510 0.577MS172258 4.325 12 5.110 5.130 0.396 0.416 4.792 4.812 4.865 4.885 0.490 0.510 0.620

SLOT SLOTMILITARY STANDARD LOCKNUT DIMENSIONS

THREADS OUTSIDE NUT FACE

A B C D FDIA. WIDTH DIA. DEPTH WIDTH

56

MS-1722 SERIES LOCKWASHER DIMENSIONS

MS-1722 LOCKWASHERS

LOCKWASHER FACE DIA. OVER RADIUS INSIDE NO. OF APP. WT.NO. DIA. TANGS DIMENSION TANGS (LB.)

C D H K LMIN. MAX. MIN. MAX. +.020/-.000 +.000/-.030 MIN. MAX. MIN. MAX. MIN. MAX. +.020/-.000

MS172201 0.406 0.421 0.110 0.120 0.531 0.828 0.062 0.094 0.084 0.104 0.016 0.036 0.044 0.333 9 0.003MS172202 0.484 0.499 0.110 0.120 0.625 0.922 0.062 0.094 0.084 0.104 0.016 0.036 0.044 0.411 9 0.004MS172203 0.601 0.616 0.110 0.120 0.750 1.094 0.062 0.094 0.084 0.104 0.016 0.036 0.044 0.513 11 0.005MS172204 0.679 0.694 0.110 0.120 0.875 1.203 0.062 0.094 0.084 0.104 0.016 0.036 0.044 0.591 11 0.006MS172205 0.801 0.816 0.156 0.176 0.969 1.344 0.062 0.094 0.146 0.166 0.016 0.036 0.044 0.724 11 0.008MS172206 0.989 1.009 0.156 0.176 1.188 1.562 0.094 0.125 0.146 0.166 0.016 0.046 0.054 0.880 13 0.013MS172207 1.193 1.213 0.156 0.176 1.438 1.859 0.094 0.125 0.146 0.166 0.031 0.046 0.054 1.084 13 0.016MS172208 1.396 1.416 0.156 0.176 1.656 2.078 0.094 0.125 0.146 0.166 0.031 0.046 0.054 1.287 15 0.019MS172209 1.583 1.603 0.280 0.300 1.844 2.250 0.094 0.125 0.204 0.234 0.031 0.058 0.068 1.474 15 0.030MS172210 1.792 1.817 0.280 0.300 2.062 2.500 0.125 0.156 0.204 0.234 0.031 0.058 0.068 1.693 17 0.037MS172211 1.992 2.017 0.280 0.300 2.250 2.688 0.125 0.156 0.204 0.234 0.031 0.058 0.068 1.880 17 0.037MS172212 2.182 2.207 0.280 0.300 2.500 2.953 0.125 0.156 0.204 0.234 0.031 0.058 0.068 2.067 17 0.042MS172213 2.400 2.425 0.280 0.300 2.688 3.188 0.125 0.156 0.204 0.234 0.047 0.058 0.068 2.255 17 0.044MS172214 2.588 2.613 0.280 0.300 2.875 3.375 0.125 0.156 0.204 0.234 0.047 0.058 0.068 2.443 19 0.048MS172215 2.791 2.816 0.280 0.300 3.094 3.594 0.188 0.250 0.204 0.234 0.047 0.058 0.068 2.631 19 0.052MS172216 2.973 3.003 0.280 0.300 3.375 3.922 0.188 0.250 0.297 0.327 0.047 0.058 0.068 2.813 19 0.077MS172217 3.177 3.207 0.340 0.360 3.594 4.141 0.188 0.250 0.297 0.327 0.047 0.058 0.068 3.017 19 0.081MS172218 3.395 3.425 0.340 0.360 3.812 4.359 0.188 0.250 0.297 0.327 0.047 0.058 0.068 3.220 19 0.084MS172219 3.582 3.612 0.340 0.360 4.000 4.547 0.188 0.250 0.297 0.327 0.047 0.058 0.068 3.380 19 0.086MS172220 3.800 3.830 0.340 0.360 4.219 4.812 0.188 0.250 0.297 0.327 0.047 0.058 0.068 3.579 19 0.092MS172221 3.988 4.018 0.340 0.360 4.406 5.000 0.250 0.312 0.297 0.327 0.047 0.058 0.068 3.786 19 0.094MS172222 4.192 4.222 0.340 0.360 4.594 5.188 0.250 0.312 0.360 0.390 0.047 0.058 0.068 4.071 19 0.104MS172223 4.395 4.425 0.340 0.360 4.812 5.406 0.250 0.312 0.360 0.390 0.047 0.058 0.068 4.193 19 0.108MS172224 0.801 0.816 0.156 0.176 1.000 1.375 0.062 0.094 0.146 0.166 0.016 0.036 0.044 0.724 11 0.009

MILITARY STANDARD LOCKWASHER DIMENSIONSBORE KEY KEY

A B F G J

TANG THICKNESSWIDTH PROJECTION WIDTH

57



LOCKNUT NUT OUTSIDE FACE INSIDE SLOT SLOT SLOTNO. WIDTH DIA. DIA. CHAMFER DIA. WIDTH RAD. NO. PER INCH MAJOR DIA.

D C E J F G R+.005/-.015 +.000/-.020 MAX. MIN. MAX. MIN. MAX. MIN.

MS 19067-A00 0.188 0.719 0.531 0.031 0.594 0.125 0.010 32 0.357 0.361 0.371 0.373 0.391MS 19067-A01 0.188 0.812 0.625 0.031 0.688 0.125 0.010 32 0.435 0.439 0.449 0.451 0.469MS 19067-A02 0.219 0.938 0.750 0.031 0.812 0.125 0.010 32 0.552 0.556 0.566 0.569 0.586MS 19067-A03 0.219 1.062 0.875 0.031 0.938 0.125 0.010 32 0.630 0.634 0.644 0.647 0.664MS 19067-A04 0.250 1.156 0.969 0.031 1.031 0.188 0.015 32 0.747 0.751 0.761 0.764 0.781MS 19067-A05 0.250 1.375 1.188 0.031 1.250 0.188 0.015 32 0.935 0.939 0.949 0.952 0.969MS 19067-A06 0.281 1.688 1.438 0.047 1.500 0.188 0.015 18 1.113 1.119 1.137 1.141 1.173MS 19067-A07 0.281 1.906 1.656 0.047 1.719 0.188 0.015 18 1.316 1.322 1.340 1.344 1.376MS 19067-A08 0.281 2.094 1.844 0.047 1.906 0.250 0.020 18 1.503 1.509 1.527 1.531 1.563MS 19067-A09 0.312 2.312 2.062 0.047 2.125 0.250 0.020 18 1.707 1.713 1.731 1.735 1.767MS 19067-A10 0.312 2.500 2.250 0.047 2.312 0.250 0.020 18 1.907 1.913 1.931 1.935 1.967MS 19067-A11 0.312 2.750 2.500 0.047 2.562 0.250 0.020 18 2.097 2.103 2.121 2.126 2.157MS 19067-A12 0.344 2.938 2.688 0.047 2.750 0.250 0.020 18 2.300 2.306 2.324 2.329 2.360MS 19067-A13 0.344 3.125 2.875 0.047 2.937 0.250 0.020 18 2.488 2.494 2.512 2.517 2.548MS 19067-A14 0.344 3.344 3.094 0.047 3.156 0.250 0.020 18 2.691 2.697 2.715 2.720 2.751MS 19067-A15 0.375 3.688 3.375 0.078 3.438 0.375 0.025 12 2.843 2.852 2.879 2.884 2.933MS 19067-A16 0.375 3.906 3.594 0.078 3.656 0.375 0.025 12 3.047 3.056 3.083 3.089 3.137MS 19067-A17 0.375 4.125 3.812 0.078 3.875 0.375 0.025 12 3.250 3.259 3.286 3.293 3.340MS 19067-A18 0.375 4.312 4.000 0.078 4.062 0.375 0.025 12 3.437 3.446 3.473 3.480 3.527MS 19067-A19 0.406 4.531 4.219 0.078 4.281 0.375 0.025 12 3.640 3.649 3.676 3.683 3.730MS 19067-A20 0.406 4.719 4.406 0.078 4.469 0.375 0.025 12 3.828 3.837 3.864 3.871 3.918MS 19067-A21 0.406 4.906 4.594 0.078 4.656 0.500 0.030 12 4.032 4.041 4.068 4.076 4.122MS 19067-A22 0.406 5.125 4.812 0.078 4.875 0.500 0.030 12 4.235 4.244 4.271 4.279 4.325

MILITARY STANDARD LOCKNUT DIMENSIONSTHREAD DATA

MINOR DIA. PITCH DIA.

58


MS-19069 LOCKWASHERS

LOCKWASHER FACE DIA. OVER NO. OFNO. DIA. TANGS TANGS

E B rNOM. TOL. +/- MAX. MIN. +.020/-.000 +.000/-.030 MAX. MIN. MAX. MIN. NOM. TOL. +/- RAD MAX. MIN.

MS 19069-A00 0.042 0.004 0.421 0.406 0.531 0.828 0.120 0.110 0.030 0.020 0.062 0.031 0.016 9 0.104 0.084MS 19069-A01 0.042 0.004 0.499 0.484 0.625 0.922 0.120 0.110 0.030 0.020 0.062 0.031 0.016 9 0.104 0.084MS 19069-A02 0.042 0.004 0.616 0.601 0.750 1.094 0.120 0.110 0.030 0.020 0.062 0.031 0.016 11 0.104 0.084MS 19069-A03 0.042 0.004 0.694 0.679 0.875 1.203 0.120 0.110 0.030 0.020 0.062 0.031 0.016 11 0.104 0.084MS 19069-A04 0.042 0.004 0.816 0.801 0.969 1.344 0.176 0.156 0.030 0.020 0.062 0.031 0.016 11 0.166 0.146MS 19069-A23 0.042 0.004 0.816 0.801 1.000 1.375 0.120 0.110 0.030 0.020 0.062 0.031 0.016 11 0.166 0.146MS 19069-A05 0.050 0.004 1.009 0.989 1.188 1.562 0.176 0.156 0.030 0.020 0.094 0.031 0.016 13 0.166 0.146MS 19069-A06 0.050 0.004 1.213 1.193 1.438 1.859 0.176 0.156 0.050 0.035 0.094 0.031 0.031 13 0.166 0.146MS 19069-A07 0.050 0.004 1.416 1.396 1.656 2.078 0.176 0.156 0.050 0.035 0.094 0.031 0.031 15 0.166 0.146MS 19069-A08 0.058 0.005 1.603 1.583 1.844 2.250 0.300 0.280 0.050 0.035 0.094 0.031 0.031 15 0.234 0.204MS 19069-A09 0.058 0.005 1.817 1.792 2.062 2.500 0.300 0.280 0.050 0.035 0.125 0.031 0.031 17 0.234 0.204MS 19069-A10 0.058 0.005 2.017 1.992 2.250 2.688 0.300 0.280 0.050 0.035 0.125 0.031 0.031 17 0.234 0.204MS 19069-A11 0.063 0.005 2.207 2.182 2.500 2.953 0.300 0.280 0.050 0.035 0.125 0.031 0.031 17 0.234 0.204MS 19069-A12 0.063 0.005 2.425 2.400 2.688 3.188 0.300 0.280 0.070 0.055 0.125 0.031 0.047 17 0.234 0.204MS 19069-A13 0.063 0.005 2.613 2.588 2.875 3.375 0.300 0.280 0.070 0.055 0.125 0.031 0.047 19 0.234 0.204MS 19069-A14 0.063 0.005 2.816 2.791 3.094 3.594 0.300 0.280 0.070 0.055 0.188 0.062 0.047 19 0.234 0.204MS 19069-A15 0.063 0.005 3.003 2.973 3.375 3.922 0.300 0.280 0.070 0.055 0.188 0.062 0.047 19 0.327 0.297MS 19069-A16 0.063 0.005 3.207 3.177 3.594 4.141 0.360 0.340 0.070 0.055 0.188 0.062 0.047 19 0.327 0.297MS 19069-A17 0.063 0.005 3.425 3.395 3.812 4.359 0.360 0.340 0.070 0.055 0.188 0.062 0.047 19 0.327 0.297MS 19069-A18 0.063 0.005 3.612 3.582 4.000 4.547 0.360 0.340 0.070 0.055 0.188 0.062 0.047 19 0.327 0.297MS 19069-A19 0.063 0.005 3.830 3.800 4.219 4.812 0.360 0.340 0.070 0.055 0.188 0.062 0.047 19 0.327 0.297MS 19069-A20 0.063 0.005 4.018 3.988 4.405 5.000 0.360 0.340 0.085 0.065 0.250 0.062 0.047 19 0.327 0.297MS 19069-A21 0.063 0.005 4.222 4.192 4.594 5.185 0.360 0.340 0.085 0.065 0.250 0.062 0.047 19 0.390 0.360MS 19069-A22 0.063 0.005 4.425 4.395 4.812 5.406 0.360 0.340 0.085 0.065 0.250 0.062 0.047 19 0.390 0.360

T

TANGWIDTH DEPTH PROJECTION WIDTH

KEY

Q R S X V

MILITARY STANDARD LOCKWASHER DIMENSIONSTHICKNESS BORE KEY KEY

59



LOCKNUT OUTSIDE INSIDE SLOT SLOT APP. WT.NO. DIA. CHAMFER DIA. RADIUS NO. PER INCH MAJOR DIA. (LB./C)

C J F RMIN. MAX. +.005/-.015 MIN. MAX. +.010/-.020 MIN. MAX. MAX. MIN. MAX. MIN. MAX. MIN.

MS19068-00 0.209 0.229 0.750 0.605 0.625 0.031 0.625 0.120 0.130 0.010 32 0.357 0.361 0.371 0.373 0.391 2.0MS19068-01 0.303 0.323 0.875 0.699 0.719 0.031 0.750 0.120 0.130 0.010 32 0.435 0.439 0.449 0.451 0.469 3.3MS19068-02 0.303 0.323 1.000 0.793 0.813 0.031 0.812 0.120 0.130 0.010 32 0.552 0.556 0.566 0.569 0.586 3.5MS19068-03 0.334 0.354 1.125 0.918 0.938 0.031 0.937 0.120 0.130 0.010 32 0.630 0.634 0.644 0.647 0.664 5.3MS19068-04 0.365 0.385 1.375 1.105 1.125 0.031 1.187 0.178 0.198 0.015 32 0.747 0.751 0.761 0.764 0.781 9.0MS19068-05 0.396 0.416 1.562 1.261 1.281 0.031 1.375 0.178 0.198 0.015 32 0.935 0.939 0.949 0.952 0.969 11.5MS19068-06 0.396 0.416 1.750 1.480 1.500 0.047 1.562 0.178 0.198 0.015 18 1.113 1.119 1.137 1.141 1.173 13.0MS19068-065 0.428 0.448 2.062 1.793 1.813 0.047 1.875 0.178 0.198 0.015 18 1.252 1.258 1.276 1.280 1.313 21.0MS19068-07 0.428 0.448 2.062 1.793 1.813 0.047 1.875 0.178 0.198 0.015 18 1.316 1.322 1.340 1.344 1.376 22.5MS19068-08 0.428 0.448 2.250 1.980 2.000 0.047 2.062 0.240 0.260 0.020 18 1.503 1.509 1.527 1.531 1.563 29.0MS19068-09 0.428 0.448 2.531 2.261 2.281 0.047 2.343 0.240 0.260 0.020 18 1.707 1.713 1.731 1.735 1.767 34.0MS19068-10 0.490 0.510 2.687 2.418 2.438 0.047 2.500 0.240 0.260 0.020 18 1.907 1.913 1.931 1.935 1.967 42.0MS19068-11 0.490 0.510 2.968 2.636 2.656 0.047 2.718 0.240 0.260 0.020 18 2.097 2.103 2.121 2.126 2.157 47.0MS19068-12 0.521 0.541 3.156 2.824 2.844 0.047 2.906 0.240 0.260 0.020 18 2.300 2.306 2.324 2.329 2.360 55.0MS19068-13 0.553 0.573 3.375 3.043 3.063 0.047 3.125 0.240 0.260 0.020 18 2.488 2.494 2.512 2.517 2.548 63.8MS19068-14 0.553 0.573 3.625 3.283 3.313 0.047 3.375 0.240 0.260 0.020 18 2.691 2.697 2.715 2.720 2.751 78.8MS19068-15 0.584 0.604 3.875 3.533 3.563 0.078 3.625 0.360 0.385 0.025 12 2.843 2.852 2.879 2.884 2.933 92.5MS19068-16 0.584 0.604 4.156 3.814 3.844 0.078 3.906 0.360 0.385 0.025 12 3.047 3.056 3.083 3.089 3.137 104.0MS19068-17 0.615 0.635 4.406 4.001 4.031 0.078 4.093 0.360 0.385 0.025 12 3.250 3.259 3.286 3.292 3.340 130.0MS19068-18 0.678 0.698 4.656 4.251 4.281 0.078 4.343 0.360 0.385 0.025 12 3.437 3.446 3.473 3.480 3.527 153.8MS19068-19 0.709 0.729 4.937 4.533 4.563 0.078 4.625 0.360 0.385 0.025 12 3.640 3.649 3.676 3.683 3.730 178.8MS19068-20 0.735 0.760 5.187 4.783 4.813 0.078 4.875 0.360 0.385 0.025 12 3.828 3.837 3.864 3.871 3.918 193.8MS19068-21 0.735 0.760 5.437 4.970 5.000 0.078 5.062 0.485 0.510 0.030 12 4.032 4.041 4.068 4.076 4.122 223.0MS19068-22 0.766 0.791 5.718 5.251 5.281 0.078 5.343 0.485 0.510 0.030 12 4.235 4.244 4.271 4.279 4.325 255.0MS19068-24 0.798 0.823 6.125 5.658 5.688 0.078 5.750 0.485 0.510 0.030 12 4.626 4.635 4.662 4.670 4.716 317.0MS19068-26 0.860 0.885 6.750 6.158 6.188 0.078 6.250 0.610 0.635 0.030 12 5.016 5.025 5.052 5.060 5.106 355.0MS19068-28 0.923 0.948 7.093 6.501 6.531 0.078 6.593 0.610 0.635 0.030 12 5.407 5.416 5.443 5.451 5.497 475.0MS19068-30 0.954 0.979 7.687 7.033 7.063 0.078 7.125 0.610 0.635 0.030 12 5.798 5.807 5.834 5.842 5.888 525.0MS19068-32 1.016 1.041 8.062 7.398 7.438 0.094 7.500 0.610 0.635 0.030 8 6.149 6.162 6.203 6.212 6.284 662.5MS19068-34 1.048 1.073 8.656 7.991 8.031 0.094 8.093 0.610 0.635 0.030 8 6.524 6.537 6.578 6.587 6.659 665.0MS19068-36 1.079 1.104 9.062 8.335 8.375 0.094 8.437 0.735 0.760 0.030 8 6.931 6.944 6.985 6.994 7.066 775.0MS19068-38 1.110 1.135 9.468 8.741 8.781 0.094 8.843 0.735 0.760 0.030 8 7.337 7.350 7.391 7.400 7.472 850.0MS19068-40 1.173 1.198 9.843 9.116 9.156 0.094 9.218 0.735 0.760 0.030 8 7.712 7.725 7.766 7.777 7.847 1,050.0

THREAD DATADIA. WIDTH MINOR DIA. PITCH DIA.

D E G

MILITARY STANDARD LOCKNUT DIMENSIONSTHICKNESS FACE SLOT

60


MS-19070 LOCKWASHERS

LOCKWASHER DIA. OVER SLOT NO. OFNO. TANGS RADIUS TANGS

B r NOM. TOL +/- MAX. MIN. MIN. TOL + MAX. MAX. MIN. MAX. MIN. MIN. TOL+ NOM. TOL +/-

MS19070-00 0.042 0.004 0.421 0.406 0.625 0.015 0.875 0.120 0.110 0.030 0.020 0.062 0.031 0.016 9 0.115 0.005MS19070-01 0.042 0.004 0.499 0.484 0.719 0.015 1.016 0.120 0.110 0.030 0.020 0.062 0.031 0.016 9 0.115 0.005MS19070-02 0.042 0.004 0.616 0.601 0.812 0.015 1.156 0.120 0.110 0.030 0.020 0.062 0.031 0.016 11 0.115 0.005MS19070-03 0.042 0.004 0.694 0.679 0.938 0.015 1.328 0.120 0.110 0.030 0.020 0.062 0.031 0.016 11 0.115 0.005MS19070-04 0.042 0.004 0.816 0.801 1.125 0.015 1.531 0.176 0.156 0.030 0.020 0.062 0.031 0.016 11 0.156 0.010MS19070-05 0.050 0.004 1.009 0.989 1.281 0.015 1.719 0.176 0.156 0.030 0.020 0.094 0.031 0.016 13 0.156 0.010MS19070-06 0.050 0.004 1.213 1.193 1.500 0.015 1.922 0.176 0.156 0.050 0.035 0.094 0.031 0.031 13 0.156 0.010MS19070-065 0.050 0.004 1.353 1.333 1.812 0.015 2.250 0.176 0.156 0.050 0.035 0.094 0.031 0.031 15 0.156 0.010MS19070-07 0.050 0.004 1.416 1.396 1.812 0.015 2.250 0.176 0.156 0.050 0.035 0.094 0.031 0.031 15 0.156 0.010MS19070-08 0.058 0.005 1.603 1.583 2.000 0.030 2.469 0.290 0.250 0.050 0.035 0.094 0.031 0.031 15 0.219 0.015MS19070-09 0.058 0.005 1.817 1.792 2.281 0.030 2.734 0.290 0.250 0.050 0.035 0.125 0.031 0.031 17 0.219 0.015MS19070-10 0.058 0.005 2.017 1.992 2.438 0.030 2.922 0.290 0.250 0.050 0.035 0.125 0.031 0.031 17 0.219 0.015MS19070-11 0.063 0.005 2.207 2.182 2.656 0.030 3.109 0.290 0.250 0.050 0.035 0.125 0.031 0.031 17 0.219 0.015MS19070-12 0.063 0.005 2.425 2.400 2.844 0.030 3.344 0.290 0.250 0.070 0.055 0.125 0.031 0.047 17 0.219 0.015MS19070-13 0.063 0.005 2.613 2.588 3.062 0.030 3.578 0.290 0.250 0.070 0.055 0.125 0.031 0.047 19 0.219 0.015MS19070-14 0.063 0.005 2.816 2.791 3.312 0.030 3.828 0.290 0.250 0.070 0.055 0.188 0.062 0.047 19 0.219 0.015MS19070-15 0.072 0.005 3.003 2.973 3.562 0.030 4.109 0.290 0.250 0.070 0.055 0.188 0.062 0.047 19 0.313 0.015MS19070-16 0.072 0.005 3.207 3.177 3.844 0.030 4.375 0.353 0.313 0.070 0.055 0.188 0.062 0.047 19 0.313 0.015MS19070-17 0.072 0.005 3.425 3.395 4.031 0.030 4.625 0.353 0.313 0.070 0.055 0.188 0.062 0.047 19 0.313 0.015MS19070-18 0.094 0.006 3.612 3.582 4.281 0.045 4.938 0.353 0.313 0.070 0.055 0.188 0.062 0.047 19 0.313 0.015MS19070-19 0.094 0.006 3.830 3.800 4.562 0.045 5.219 0.353 0.313 0.070 0.055 0.188 0.062 0.047 19 0.313 0.015MS19070-20 0.094 0.006 4.018 3.988 4.812 0.045 5.500 0.353 0.313 0.085 0.065 0.250 0.062 0.047 19 0.313 0.015MS19070-21 0.094 0.006 4.222 4.192 5.000 0.045 5.703 0.353 0.313 0.085 0.065 0.250 0.062 0.047 19 0.375 0.015MS19070-22 0.125 0.007 4.425 4.395 5.281 0.045 6.062 0.353 0.313 0.085 0.065 0.250 0.062 0.047 19 0.375 0.015MS19070-24 0.125 0.007 4.831 4.801 5.688 0.045 6.469 0.353 0.313 0.085 0.065 0.250 0.062 0.047 19 0.375 0.015MS19070-26 0.125 0.007 5.226 5.191 6.188 0.045 7.031 0.435 0.375 0.105 0.085 0.250 0.062 0.062 19 0.500 0.020MS19070-28 0.125 0.007 5.617 5.582 6.531 0.045 7.438 0.590 0.500 0.105 0.085 0.250 0.062 0.062 19 0.500 0.020MS19070-30 0.156 0.008 6.018 5.983 7.062 0.060 8.062 0.590 0.500 0.105 0.085 0.312 0.062 0.062 19 0.500 0.020MS19070-32 0.156 0.008 6.424 6.389 7.438 0.060 8.438 0.590 0.500 0.105 0.085 0.312 0.062 0.062 19 0.500 0.020MS19070-34 0.156 0.008 6.799 6.764 8.031 0.060 9.062 0.715 0.625 0.105 0.085 0.312 0.062 0.062 19 0.500 0.020MS19070-36 0.156 0.008 7.206 7.171 8.375 0.060 9.438 0.715 0.625 0.105 0.085 0.312 0.062 0.062 19 0.625 0.020MS19070-38 0.156 0.008 7.612 7.577 8.781 0.060 9.875 0.715 0.625 0.105 0.085 0.312 0.062 0.062 19 0.625 0.020MS19070-40 0.156 0.008 8.017 7.982 9.156 0.060 10.312 0.840 0.750 0.105 0.085 0.312 0.062 0.062 19 0.625 0.020

MILITARY STANDARD LOCKWASHER DIMENSIONSTHICKNESS BORE FACE KEY KEY KEY TANG

DIA. WIDTH DEPTH PROJECTION WIDTHTQ R E S X V

61

SPANNER WRENCHES ADJUSTABLE SPANNER WRENCHES For standard locknut series

SPANNER WRENCHES

FIXED SPANNER WRENCHES For standard locknut series

Metric Spanner Wrenches are also available (SWM and ASWM).

OUTSIDE SHAFT SHAFT EXT. DRIVE SQ. RECESS DRIVE OAL ID DRIVER DRIVER DRIVER PART NO. DIA. NOM. EXT. LENGTH DEPTH SPAN HEIGHT WIDTH

A B C D E F V W Y Z +/-.015 MIN. MIN. +.005/+.020 MIN. +/-0.03 +.010/-.000 +.015/-.005

SW-00 1 1/4 3/8 2 1/16 3/8 3/16 3/8 2 3/4 .760-.790 0.670 1/8 .107-.117 SW-01 1 3/8 7/16 2 1/8 3/8 1/4 3/8 2 7/8 .885-.915 0.795 3/16 .107-.117 SW-02 1 1/2 9/16 2 1/8 3/8 1/4 3/8 2 7/8 1.010-1.040 0.860 3/16 .107-.117 SW-03 1 5/8 5/8 2 1/8 3/8 5/16 3/8 3 1.135-1.165 0.983 5/32 .107-.117 SW-04 1 7/8 3/4 2 1/16 3/8 5/16 3/8 3 1.385-1.415 1.252 1/4 .165-.175 SW-05 2 1/16 15/16 2 1/16 3/8 3/8 3/8 3 1.572-1.602 1.440 1/4 .165-.175 SW-06 2 3/8 13/16 2 1/4 1/2 3/8 1/2 3 1/4 1.760-1.790 1.627 1/4 .165-.175 SW-07 2 11/16 13/8 2 1/4 1/2 13/32 1/2 3 1/4 2.072-2.102 1.940 1/4 .165-.175 SW-08 2 7/8 19/16 2 1/4 1/2 13/32 1/2 3 1/4 2.260-2.290 2.137 1/4 .227-.237 SW-09 3 3/16 13/4 2 1/4 1/2 13/32 1/2 3 1/4 2.541-2.571 2.419 1/4 .227-.237 SW-10 3 3/8 115/16 2 5/8 1/2 15/32 1/2 3 3/4 2.698-2.728 2.575 3/8 .227-.237 SW-11 3 5/8 21/8 2 5/8 1/2 15/32 1/2 3 3/4 2.979-3.009 2.794 3/8 .227-.237 SW-12 3 13/16 25/16 2 5/8 1/2 1/2 1/2 3 3/4 3.166-3.196 2.981 3/8 .227-.237 SW-13 4 21/2 2 5/8 1/2 1/2 1/2 3 3/4 3.385-3.415 3.200 3/8 .227-.237 SW-14 4 1/4 23/4 2 5/8 1/2 1/2 1/2 3 3/4 3.635-3.665 3.450 3/8 .227-.237 SW-15 4 1/2 27/8 2 3/4 3/4 9/16 3/4 4 1/4 3.885-3.915 3.640 7/16 .347-.357

SPANNER WRENCH DIMENSIONS

ASW04-11 N04-N11 1.250-3.000 8.125

ADJUSTABLE SPANNER WRENCH SIZESWRENCH NUMBER FITS

LOCKNUT SIZEFOR DIAMETER WRENCH OAL

ASW00-06 N00-N06 0.750-2.000 6.375

ASW26-34 AN26-AN34 6.125-8.750 13.750

ASW08-18 N08-AN18 2.000-4.750 11.375ASW18-24 AN18-AN24 4.500-6.250 12.125

64

DRT SERIES RETHREADING DIE DIMENSIONS

DRT SERIES RETHREADING DIES

Metric Rethreading Dies are also available (DRTM).

PART THREADNO. SIZE MAJOR DIA.

A B +0/-0.10 +0/-0.015 MAX. MIN. MAX. MIN. MAX.

DRT00 .391-32 0.088 0.438 0.391 0.3870 0.3910 0.3870 0.3527 DRT01 .469-32 1.063 0.500 0.469 0.4650 0.4487 0.4461 0.4307 DRT02 .586-32 1.250 0.625 0.586 0.5820 0.5657 0.5627 0.5477 DRT03 .664-32 1.438 0.625 0.664 0.6600 0.6437 0.6407 0.6257 DRT04 .781-32 1.625 0.875 0.781 0.7770 0.7607 0.7573 0.7427 DRT05 .969-32 1.625 0.875 0.969 0.9650 0.9487 0.9453 0.9307 DRT06 1.173-18 1.813 1.000 1.173 1.1680 1.1369 1.1329 1.1048

DRT065 1.313-18 2.375 1.000 1.313 1.3050 1.2764 1.2724 1.2443 DRT07 1.376-18 2.375 1.000 1.376 1.3710 1.3399 1.3359 1.3078 DRT08 1.563-18 3.125 1.000 1.563 1.5580 1.5269 1.5224 1.4948 DRT09 1.767-18 3.125 1.000 1.767 1.7620 1.7309 1.7264 1.6988 DRT10 1.967-18 3.500 1.000 1.967 1.9620 1.9309 1.9264 1.8988 DRT11 2.157-18 3.500 1.000 2.157 2.1520 2.1209 2.1158 2.0888 DRT12 2.360-18 4.500 1.000 2.360 2.3550 2.3239 2.3188 2.2918 DRT13 2.548-18 4.500 1.000 2.548 2.5430 2.5119 2.5008 2.4798 DRT14 2.751-18 4.500 1.000 2.751 2.7460 2.7149 2.7098 2.6828 DRT15 2.933-12 5.000 1.000 2.933 2.9270 2.8789 2.8735 2.8308 DRT16 3.137-12 5.000 1.000 3.137 3.1310 3.0829 3.0770 3.0348 DRT17 3.340-12 5.000 1.000 3.340 3.3360 3.2859 3.2800 3.2378 DRT18 3.527-12 6.000 1.000 3.527 3.5210 3.4729 3.4655 3.4248 DRT19 3.730-12 6.000 1.000 3.730 3.7240 3.6759 3.6685 3.6278 DRT20 3.918-12 6.000 1.000 3.918 3.9120 3.8639 3.8565 3.8158 DRT22 4.325-12 8.000 1.000 4.325 4.3190 4.2709 4.2626 4.2228 DRT24 4.716-12 8.000 1.000 4.716 4.7050 4.6619 4.6536 4.6138 DRT26 5.106-12 8.000 1.000 5.106 5.0950 5.0520 5.0440 5.0038 DRT28 5.497-12 8.000 1.000 5.497 5.4860 5.4429 5.4346 5.3948 DRT30 5.888-12 8.000 1.000 5.888 5.8770 5.8339 5.8256 5.7858

SHAFT THREADSRETHREADING DIE DIMENSIONS

PITCH DIA. MINOR DIA.

66

NC SERIES CLAMP NUT DIMENSIONS

NC SERIES CLAMP NUTS

Metric Clamp Nuts are also available.

CLAMP NUT OUTSIDE NUT FACE CLAMP SCREWNO. SIZE NO. PER INCH DIA. WIDTH DIA. SIZE

C D SMIN. MAX. MIN. MAX.

NC-00 0.391 32 0.3572 0.3606 0.3707 0.3733 1.000 0.375 0.625 M3 NC-01 0.469 32 0.4352 0.4386 0.4487 0.4513 1.125 0.375 0.719 M3 NC-02 0.586 32 0.5522 0.5556 0.5657 0.5687 1.375 0.375 0.813 M4NC-03 0.664 32 0.6302 0.6336 0.6437 0.6467 1.562 0.438 0.938 M5 NC-04 0.781 32 0.7472 0.7506 0.7607 0.7641 1.750 0.438 1.125 M5 NC-05 0.969 32 0.9352 0.9386 0.9487 0.9521 2.000 0.438 1.281 M5 NC-06 1.173 18 1.1129 1.1189 1.1369 1.1409 2.125 0.500 1.500 M5 NC-07 1.376 18 1.3159 1.3219 1.3399 1.3439 2.375 0.500 1.813 M5 NC-08 1.563 18 1.5029 1.5089 1.5263 1.5308 2.562 0.500 2.000 M5 NC-09 1.767 18 1.7069 1.7129 1.7309 1.7354 2.688 0.510 2.280 M6 NC-10 1.967 18 1.9069 1.9129 1.9309 1.9354 3.000 0.510 2.430 M6 NC-11 2.157 18 2.0969 2.1029 2.1209 2.1260 3.375 0.635 2.650 M8NC-12 2.360 18 2.2999 2.3059 2.3239 2.3290 3.625 0.635 2.840 M8NC-13 2.548 18 2.4879 2.4939 2.5119 2.5170 3.875 0.635 3.060 M8NC-14 2.751 18 2.6909 2.6969 2.7149 2.7200 4.125 0.635 3.310 M8

THREADSMINOR DIA. PITCH DIA.

CLAMP NUT DIMENSIONS

67

X WASHERS X-WASHERS and PINS DIMENSIONS

X-WASHERS

NOTES: X-WASHERS Commercial tolerances All X-Washers are zinc plated or plated to your specifications PINS When ordering, specify pin part number and effective length “K”. Pins plated to your specifications. Special pin designs quoted at your request.

X WASHER ID THICKNESSNO. A B C D E F

9000 5-4 0.086 0.025 0.320 0.406 0.210 0.4069000 6 0.098 0.055 0.364 0.490 0.297 0.4759000 8 0.130 0.055 0.430 0.575 0.359 0.5569000 10 0.164 0.065 0.523 0.687 0.422 0.6659000 12 0.190 0.065 0.593 0.745 0.437 0.7309000 14 0.222 0.075 0.622 0.776 0.469 0.7759000 16 0.256 0.075 0.698 0.905 0.500 0.8909000 18 0.285 0.075 0.822 0.986 0.563 0.9849000 20 0.317 0.089 0.872 1.100 0.609 1.0789000 22 0.347 0.089 0.948 1.190 0.688 1.1889000 24 0.381 0.089 1.060 1.297 0.797 1.281

X WASHER DIMENSIONS

SIZE +.000/-.005 +.000/-.004 +.005/-.000G H I J L

H-5 0.086 0.156 0.250 0.031 0.062H-6 0.093 0.187 0.312 0.062 0.062H-7 0.093 0.218 0.343 0.062 0.062H-8 0.125 0.250 0.375 0.062 0.062H-9 0.125 0.281 0.406 0.062 0.062H-10 0.156 0.312 0.437 0.075 0.062H-11 0.156 0.343 0.468 0.075 0.062H-12 0.187 0.375 0.500 0.075 0.062H-13 0.187 0.406 0.531 0.075 0.062H-14 0.218 0.437 0.562 0.083 0.062H-15 0.218 0.468 0.593 0.083 0.062H-16 0.250 0.500 0.625 0.083 0.062H-17 0.250 0.531 0.656 0.083 0.062H-18 0.279 0.562 0.687 0.083 0.093H-19 0.279 0.593 0.718 0.083 0.093H-20 0.311 0.625 0.750 0.097 0.093H-21 0.311 0.656 0.781 0.097 0.093H-22 0.341 0.687 0.812 0.097 0.093H-23 0.341 0.718 0.843 0.097 0.093H-24 0.375 0.750 0.875 0.097 0.093H-25 0.375 0.781 0.906 0.097 0.093

PIN DIMENSIONS

68

X-WASHERS

XXX STANDARD’s X‐WASHER provides manufacturing

industries with a simple, efficient, economical

fastener/retainer assembly. The X‐WASHER func‐

ons as both a fastener and a washer; by virtue of

its posi ve clinching opera on, the X‐WASHER is a

versa le and strong fastener –in many cases

providing sufficient axial strength to replace a nut

and washer. The shear‐resistant X‐WASHER is

stamped from cold rolled steel* (Spec. SAE 1010

or equiv.) and then cadmium or zinc plated.*

STANDARD X‐WASHERS hold produc on costs to a

minimum by elimina ng the two– and three‐item

assembly required by tradi onal fasteners. Easily

applied and quickly clamped to a posi ve 360o

closure, the X‐WASHER saves hours of assembly

me; simple “one‐two” installa on, combined

with STANDARD’s posi ve clinching ac on elimi‐

nate costly produc on failures. The X‐WASHER is

applied to the grooved pin by hand and quickly

clamped with pliers or automa c equipment.

Removal lugs facilitate any necessary service or

repairs. “Easy on...Strong posi ve closure…Easy

off.” X‐WASHER sizes are readily available for pin

diameters from 5/64 to 25/32 inch.

*SPECIAL MATERIAL OR PLATING QUOTED ON REQUEST

TM

WASHER

RETA INER

69

Contract Machining

CONTRACT MACHINING

Highest Quality Machined Products

Through our Quality, Engineering, and Manufacturing systems, we at Standard Locknut can produce products to your specific requirements and deliver on time. Our core competency in CNC machining and secondary operations such as broaching, milling, drilling and tapping provide you with the highest quality part you expect through a team of highly skilled and dedicated associates. We are TS16949 and AS9100 certified, so we understand the importance of quality, deliv-ery, and customer satisfaction.

Capabili es

More than 80 CNC work centers for machining of forgings,

castings, tubing, or bar stock

CNC Machining (Milling, Drilling, and Threading) of parts in a

50” L x 26” W x 25” H envelope

Turning of parts up to 52” in diameter

Production capability for low or high production volumes

Expedited deliveries available

Contact our Sales Department at [email protected] for a quote. Or Call Customer Service at 800‐783‐6887

· we are recognized in the bearing industry as the premier supplier of bearing accessories...

Documents