argenta - proline hardware · 2016. 12. 8. · 2 40 35 argenta opening doors ® 3 argenta ®...
TRANSCRIPT
argentaopening doors
®
argenta® proslide®
Professional sliding door fittings for internal wooden doors up to 100 kg
2argentaopening doors
®
Introduction
Argent Alu presents the high-quality argenta proslide
sliding door fittings. They are suitable for both residential
and non-residential new buildings and renovations
The sliding door fittings are specifically designed for
professional applications such as offices, schools
hospitals, and the healthcare sector ... All components
have been designed to guarantee extreme wear resistance
with high frequency use. This makes it ideal for high-end
interior designs.
Among other things, the argenta proslide consists of
- A very stable aluminium top rail
- Highly sophisticated roller trolleys with extra large and
wide wheels, each equipped with precision ball bearings
- An adjustable “standard Stop” or an exceptional
“Slow-Stop” damper which allows the door to be stopped and held in place in a measured and controlled fashion
- An aluminium guide track with an accompanying extra
strong aluminium plastic-hooded floor guide to minimise
slack and prevent rattling
- Various fastening systems such as the “Standard-Fix” fastening system, the “Manual-Fix” system (which can be milled into the door panel invisibly) or the ultimate in convenience: the invisible “Auto-Fix” with which the door panel can be quickly and easily affixed in a single operation to the roller assembly, saving a huge amount of time during installation.
The argenta proslide sliding door fittings offer solutions
for single, parallel, simultaneous, symmetrical and
telescopic doors as well as for automated
sliding doors and floor-to-ceiling sliding doors.
argenta® proslide® - Professional sliding door fittings for internal wooden doors up to 100 kg
402
35
argentaopening doors
®3
argenta® proslide® - Components
Track• Stable track so no deformation occurs when there are lateral
forces on door panel.• Thanks to the separate upper chamber, the rollers cannot
come into contact with the fixing screws, adjustable stop or activator. This ensures proper, low-noise passage along the track.
• Thanks to the special design of the wheels and the track, the roller assembly will always run centred and never drag against the side of the upper rail, so no disturbing noises will occur.
• Both round and oval fixing holes for quick assembly and alignment.
• Due to the ‘toothed’ oval fixing holes, loosening of the screws is avoided and there is additional resistance to the shifting of the rail.
• The top rail and the cover track are supplied in lengths of 2000, 3000 or 6000 mm. Customisation is possible.
• Both tracks are supplied satin anodised.
• Easy (dis)assembly of the tilting Slow-Stop damper without the need to disassemble the entire track.
• Ideal for renovation.• A must for wall-to-wall applications.• ESSI module: 50 mm.
Fastening systems
Standard-Fix• Easy and budget-friendly
Manual-Fix• Invisible
(milled into door panel)
Auto-Fix• Invisible (milled into door panel)• Easy time-saving assembly
without tools in a single simple operation
Roller Assembly & Stop
• Adjustable Standard-Stop with ability to set clamping force so that the stopper functions perfectly in all circumstances.
• Tilting Slow-Stop damper for easy (dis)assembly thanks to the unique ESSI module. The minimum door width for a single slow-stop damper must be 730 mm. For two slow-stop dampers, this minimum is 930 mm.
Floor guide
argenta proslide aluminium floor guide
ESSI®-Module
4argentaopening doors
®
argenta® proslide® - Project sliding door fittings
Parallel sliding door fittings for two or three doors – with carriers
Telescopic sliding door fittings for 2 or 3 doors – through belt transmission
A single set of accessories (in the case of two doors) consists of• 1 floor guide• 2 end drivers• 1 intermediate driver• 1 connecting bottom guide• 1 spanner
A single set of accessories (in the case of 2 doors) consists of• 4 Standard-Fix mounting brackets• 4 roller assemblies• 2 adjustable synthetic stoppers• 1 floor guide• 1 connecting bottom guide• 1 geared belt• 2 reversing wheels• 1 belt driver• 1 fixed belt tightening bracket• 1 spanner
Application• For closing a large doorway where the opening is closed
in two or three parts.
Can be used with• Standard-Fix fastening with 2 standard adjustable
stoppers.• Manual-Fix or Auto-Fix fastening with 2 standard
adjustable stoppers, ideal for a minimal slack between the door panel and the track.
Application• For low-noise closure of a large doorway where the
opening is closed in 2 or 3 parts.
Optional• Can be combined with the proslide Motion for an
automated solution (see page 7).
argentaopening doors
®5
argenta® proslide® - Project sliding door fittings
Symmetrical sliding door fittings for 2 doors – through belt transmission
Simultaneous sliding door fittings for 2 doors – through belt transmission
A single set of accessories (in the case of 2 doors) consists of• 4 Standard fix mounting brackets• 4 roller assemblies• 2 adjustable synthetic stoppers• 2 floor guides• 1 geared belt• 2 reversing wheels• 1 belt driver• 1 belt tensioner• 1 spanner
A single set of accessories (in the case of 2 doors)consists of• 4 Standard fix mounting brackets• 4 roller assemblies• 2 adjustable synthetic stoppers• 2 floor guides• 1 geared belt• 2 reversing wheels• 1 belt driver• 1 belt tensioner• 1 spanner
Application• For symmetrical closing or opening 2 doors towards
each other.
Optional• Can be combined with the proslide Motion for an
automated solution (see page 7).• Cover cap, reinforcing brackets and end caps for door
thicknesses up to 80 mm.
Application• Having 2 doors at 2 positions simultaneously open or
close.
Optional• Can be combined with the proslide Motion for an
automated solution (see page 7).• Cover cap, reinforcing brackets and end caps for door
thicknesses up to 80 mm.
6argentaopening doors
®
argenta® proslide® - Project sliding door fittings
Symmetrical/telescopic sliding door fittings for 4 doors – through belt transmission
A single set of accessories (in the case of 4 doors) consists of• 8 Standard fix mounting brackets• 8 roller assemblies• 4 adjustable synthetic stoppers• 2 floor guides• 2 connecting bottom guides• 1 geared belt• 6 reversing wheels• 3 belt drivers• 1 belt tensioner• 2 fixed belt tightening brackets• 1 spanner
Application• For closing or opening a large doorway with 4 smaller
doors.
Optional• Can be combined with the proslide Motion for an
automated solution (see page 7).
Sliding revolving door – in combination with the invisible Pro XS-4
A single set of accessories (in the case of 2 doors) consists of• 1 Manual-Fix mounting bracket• 1 roller assembly• 6 argenta invisible Pro XS-4 hinges• 1 argenta Magnotica
Application• For opening or closing a large doorway where there is no
room to place a normal swing-door.
argentaopening doors
®7
argenta® proslide® - Project sliding door fittings
Proslide Motion – automated sliding door fitting
Advantages• Thanks to Smart Technology the motor automatically adjusts the speed to the weight of the door panel.• Thanks to the compact dimensions of the motor, the door panel can slide
underneath the motor.• Suitable for both indoor and outdoor applications (IP55).• Thanks to built-in software, the motor automatically learns the end points.• Easy assembly and installation.• With integrated radio frequency (KNX protocol).• During a power failure, the door can still be opened or closed manually.• Double bearing drive.• Comes standard with a built-in RF button.
Technical specifications• Power supply: 230 VAC – 50 Hz• Maximum door weight and speed: - Indoor: 100 kg – 400mm/sec - Outdoor: 80 kg – 100mm/sec
argentaopening doors
® nv Argent Alu sa | Bankstraat 2, 9770 Kruishoutem - BelgiumT +32 (0)9 333 99 99 | F +32 (0)9 333 99 90 | [email protected] | www.argentalu.com ©
L30
0243
1 12
/15
Eng
lish
Invisible built-in guide track for floor-to-ceiling sliding doors to 100 kg
Application• For floor-to-ceiling doors with plasterboard ceilings.
Advantages• Thanks to the unique, height-adjustable ESSI module, the roller assemblies
can be easily put together and taken apart, even after finishing the ceiling.• Finishing track and guide track in one.• Virtually no chance of cracks in plasterwork thanks to: - Stable 3-chambered track - Possibility of proper anchoring using two rows of screw holes - Special dovetail profiling for good adhesion to plasterwork - Special profiling for easy placement of plasterboard• Time savings thanks to the simple installation and finishing.• Sideways mounting for suspension dowels possible.• The rail is available in 2, 3 or 6 m. Customisation is possible.
Optional• Can be used with Manual-Fix and Auto-Fix sets of accessories for minimal
slack. If used so, an extra extended bolt has to be ordered.
argenta® proslide® - Invisible ceiling track
Argent Alu reserves the right to make technical changes to its products without prior notice.
*L3002431*