as83519/1 and /2 type heat shrink termination (hst) sleeves · universally accomplished with...

• Ihis report not to be guoted without prior reference to the Council" International Council for the Exploration of the Sea C.M.1989/Assess:8 REPGRT OF THE tiORKING GROUP ON CGD STOCKS OFF EAST GREENLAND Copenhaqen. 22 - 28 February 1989 Ihis document is areport of a Workinq Group of the International Council for the Exploration of the Sea and does not necessarily represent the views of the Council. Iherefore. it should not be quoted without consultation with the General Secretary. "General Secretary ICES Pal<egade 2-4 DK-1261 Copenhaqen K DENMARK

Upload: others

Post on 20-May-2020

7 views

Category:

Documents

0 download

Report

Download

Embed Size (px):

TRANSCRIPT

Page 1: AS83519/1 AND /2 TYPE Heat Shrink Termination (HST) Sleeves · universally accomplished with AS83519/1 and /2 type heat shrink termination (HST) sleeves. These devices, supplied in

�� Designed to meet SAE AS83519 performance requirements

�� Fabricated from transparent cross-linked polyvinylidene fluoride tubing for optimal environmental shield termination

�� Pre-fluxed solder preform and thermally stabilized thermoplastic sealing rings to encapsulate and protect the shield-to-ground termination

�� -55ºC to 125ºC temperature range IAW SAE AS83519

Heat Shrink Termination (HST) SleevesFor EMI shield-to-ground termination

Reliable termination of EMI/RFI shielding (to ground) in wire harness applications is universally accomplished with AS83519/1 and /2 type heat shrink termination (HST)

sleeves. These devices, supplied in five different sizes—with or without pre-installed ground lead wires—provide environmental encapsulation and insulation of the shield termination site. Transparent heat shrink tubing allows for easy inspection and supplies additional strength and strain-relief. The preflux solder preform delivers a fast and controlled solder joint each and every time. Designed to meet SAE AS83519 performance requirements, Glenair Heat Shrink Termination (HST) shield to ground termination sleeves are fabricated from special transparent cross-linked polyvinylidene fluoride tubing to deliver optimal environmental shield termination in aerospace and defense industry applications. Each HST device is equipped with a pre-fluxed solder preform and thermally stabilized thermoplastic sealing rings that encapsulate and protect the shield-to-ground termination. Glenair HST devices are tested to perform from -55ºC to 125ºC IAW SAE AS83519. Best of all, these HST devices are made in the USA and stocked for immediate same-day shipment.

AS83519/1 AND /2 TYPE

AS83519/1 AND /2 TYPE • M81824/1-1 QUALIFIEDHeat Shrink Termination Sleeves and Splices

077-010AS83519/1 Type HST SleeveNo Lead Wire

077-020AS83519/2 Type HST SleevePre-Installed Lead Wire

GS83519/1AS83519/1 Type HST SleeveNo Lead Wire

GS83519/2AS83519/2 Type HST SleevePre-Installed Lead Wire

M81824/1-1Mil-Qualified SpliceIn-Line, Insulated, Environmental

HEAT SHRINK TERMINATION SLEEVES PRODUCT SELECTION GUIDE

AUTOMATED HST CELL ENSURES RELIABLE, REPEATABLE FABRICATION QUALITY

Glenair Heat Shrink Termination (HST) devices are supplied with pre-tinned leads including industry-standard nickel-copper per A-A-59569, Tin Copper Braid per A-A-59569, and ultra lightweight ArmorLite™ plated stainless steel microfilament.

MATERIAL/FINISH:• Insulation sleeve - Heat-shrinkable, radiation crosslinked, modified

polyvinylidene fluoride per MIL-I-23053/8. Color - Translucent blue.• Sealing ring - Thermally stabilized thermoplastic. Color - blue.• Solder - Sn63 per ANSI-J-STD-006.• Flux - ROM1 per ANSI-J-STD-004 (to be used on nickel plated shields only).• Optional thermal indicator - changes from color to colorless.

Shelby Printing style - american-usa.com€¦ · l Holiday detector l Propane torch for shrink sleeves q JOINT MATERIALS l Shipped loose •Shrink sleeves ... mill sequence number,

LabelLink moves into shrink sleeves and GILL LOUBSER ...€¦ · shrink sleeves and GILL LOUBSER digital printing revisits WA Stemmet Consulting for an update on the group’s latest

INDUSTRIAL VACUUM COMPONENTS · 2019-04-09 · Shrink Sleeves..... 18 Wrapped Sleeves ..... 18 Instalok™ Couplings ..... 19-20 Compression Couplings... 21-22 Slip Welding Rings

Contents · 9. Labels & Shrink Sleeves 9.1.Size In order to maximise the efficiency of HDPE screening, the design of labels and/or shrink sleeves should be as small as possible. Labels

PACKAGING WITH TOPAS® COC · 2020-01-15 · Shrink sleeves and labels High shrinkage and stiffness with low shrink force Soft shrink film Tough, stiff, soft shrink, halogen-free,

Brewer's Quick Start Guide to Labeling - Resource Label Grouppressure sensitive label solution. Shrink Sleeve – Shrink sleeves are a film label which is slipped over a container

POLY-CHEM SHRINK SLEEVES - Frontpage | Teleste · of poly-chem ™ shrink sleeves, provides a robust, weather proofed sealing interface. Preventing signal integrity issues, service

· HEAT SHRINK BUSBAR TUBES WOER- Heat Shrink Materials Heat shrink tubes for ferrule Print-ng WOER- Heat Shrink Materials Cable Repair Sleeves- Zip type END CAPS & BREAKOUTS Heat

Automatic Heat-Shrink Sleeve Applicator Using the Low ... · Abstract−Catalytic combustion for applying heat shrink sleeves (HSS) to a pipeline in KOGAS was investigated. We used

Epson LW-400VP › wp-content › ... · 4 mm Heat Shrink Tube (HST) Tape Abc 123 LK-4YBA3 4 mm Heat Shrink Tube (HST) Tape Abc 123 LK-4WBA3 6 mm Standart Abc 123 LK-2WBN 6 mm Şeffaf

Automation of Shrink Sleeving Machine...Automation of Shrink Sleeving Machine ... Shrink sleeve labels are sleeves constructed from film material that, rather than using adhesive,

Studio Toolkit for Shrink Sleeves 14 User Guide · different from shrink sleeve labels in the way that they are seamed and placed around the object. But these differences are not