asad_waqar_cv

Upload: aqazam

Post on 05-Apr-2018

216 views

Category:

Documents


0 download

TRANSCRIPT

  • 8/2/2019 ASAD_WAQAR_CV

    1/3

    Personal Details

    Name: Asad Waqar

    Date of Birth: 25.12.1978

    Place of Birth: Rawalpindi, Pakistan

    Email: [email protected]

    Tel: +49-176-4120 6028

    Mobile: +49-241-4023 4763

    Address: Room No. 1104, Kastanienweg 6,

    52074 Aachen, Germany

    Nationality: Pakistan

    Marital Status: Single

    Key Competencies

    Power System Studies Technical and Economic Evaluations of Power Systems Power System Network Planning (LV/MV/HV/EHV) Project Management Quality Management Knowledge of Standardization Knowledge of Automation Systems Certified ISO 9001:2000 Quality Management System Lead AuditorEducation

    08.2008 03.2011 M.Sc Electrical Power Engineering (Energietechnik)

    RWTH Aachen University, Germany

    Grade: 2.3/Good (German)

    04.1998. 09.2002 B.Sc Electrical Engineering

    University of Engineering & Technology Taxila, Pakistan

    Grade/Percentage: 70%

    Professional Certificates

    09.2006 02.2007 Professional Certificate in Enterprise Resource Planning

    Centre for Advanced Studies (CASE), Islamabad, Pakistan

    05.2005 05.2005 Certified ISO 9001:2000 QMS Auditor/ Lead Auditor

    Pakistan Institute of Quality Control (PIQC), Lahore, Pakistan

    Research Projects

    11.2010 03.2011 Master Thesis

    Institute of Power Systems & Power Economics (IAEW), RWTH Aachen

    Analysis of Mediterranean States Power Markets and Transmission

    Networks in context of Solar Exports to Europe

    In connection with the DESERTEC Project (a concept of installing 150GW

    capacity of concentrated solar plants (CSPs) in North African Sahara desert

    and transporting it to Europe via a super grid), an assessment of existing

    infrastructure of North African Mediterranean States energy markets and

    transmission networks is carried out. The aim of this thesis is to answer

    questions, like, locations of the CSPs and implications of DESERTEC Project

    on current infrastructure of the Mediterranean states. The investigation

    carried out includes the study of existing generation technologies,

  • 8/2/2019 ASAD_WAQAR_CV

    2/3

    development of generation capacities, increase in peak load demands,

    operation of energy markets inclusive of transmission and distribution

    companies, extent of market liberalization, tariffs, transmission networks

    infrastructure, electrical interconnections and power flows. To run an

    energy market simulation of the existing capacity, an estimation technique

    to determine the hourly based yearly load profile is developed. A regression

    model is also developed to forecast and correlate the development in peak

    load demand based on economic growth.

    10.2009 04.2010 Mini-Thesis

    Institute of Power Systems & Power Economics (IAEW), RWTH Aachen

    Long Term Planning of Medium Voltage (10 kV) Networks

    Network planning is carried out with the goal to minimize the total costs

    while satisfying all the technical requirements. The economic evaluations

    include the investment costs, operational/ maintenance costs and cost of

    energy losses. The technical evaluations include the load flow calculations,

    reliability of power supply (interruption frequency, duration and

    probability), thermal limits of equipment and voltage quality (in normal and

    disturbed operation). The network is planned using the Green Field

    method.

    10.2010. 10.2010 Laboratory Project

    Institute of Power Systems & Power Economics (IAEW), RWTH Aachen

    Computer Aided Planning of High Voltage (110 kV) and Extra High

    Voltage (380/ 220 kV) Systems

    To supply an arc furnace of 85 MVA, three different connection possibilities

    are analyzed both technically and economically. The economic evaluations

    include the calculation of investment and loss costs. The technical

    evaluation includes the load flow calculations. The reliability is calculated

    using the (n-1) contingency criterion.

    Professional Experience

    06.2009 03.2011 Ericsson GmbH, Herzogenrath Germany

    Student Helper I was working with the product line maintenance (PLM) support team for

    mobile packet backbone networks (MPBN). I was responsible for

    Software handling and statistics management of trouble reports (TRs) Administration and management of equipment database Maintenance of internal web pages Support in documentation Support in laboratory activit ies

  • 8/2/2019 ASAD_WAQAR_CV

    3/3

    12.2007 05.2008 National Development Complex (NDC), NESCOM Islamabad, Pakistan

    Manager I was working in automation & control systems department. In December

    2007, I was promoted to Manager. As a manager my responsibilities

    included

    Liaison Engineer with regard to customer issues and queries related toproject management and execution

    Organizing, coordinating and monitoring individual phases likeprocurement, engineering, assembly, commissioning and testing of

    automation systems

    Defining the structure, organization, scope and timeline of projects Reviewing of customer requirements and clarification of technical and

    commercial details of contracts

    Reviewing and approving of system and project documentation Updating and presentation of projects progression to higher

    management

    10.2002 11.2007 National Development Complex (NDC), NESCOM Islamabad, Pakistan

    Assistant Manager I joined the organization as Assistant Manager in automation and control

    systems department. As Assistant Manager my responsibilities were

    Testing and verification of automation systems based onmicrocontrollers and programmable logic controllers (PLCs) both in-

    house and in-field

    Development of test benches Installation and commissioning of automation systems Preparation of system level documentation like bill of materials (BOMs),

    standard operating procedures (SOPs), system related work instructions

    (WIs), system technical data packs (TDPs) and testing performas to

    record the results.

    Implementation and compliance of quality assurance standards Maintenance and post delivery services management of automation

    systems

    Support in purchasing process of PCBs, electrical/ electroniccomponents, cables, connectors and mechanical enclosures

    Liaison Engineer with regard to customer issues and queries related toproject management and executionComputer Knowledge & IT Skills

    MS-Windows MS-Project MS-Office MS Visio PSpice AutoCAD MATLAB C/C++ QUINTESSENCE NEPLAN PSCAD SPSS LINGOLanguage Skills

    English (Fluent) German (Basic) Urdu (Mother Tongue) Punjabi (Mother Tongue)References

    Univ.-Prof. Dr.-Ing. Albert MoserIAEW, RWTH Aachen

    [email protected]

    Wolfgang Heuer (Group Manager)Ericsson GmbH

    [email protected]

    Christian Linnemann (Researcher)IAEW, RWTH Aachen

    [email protected]