asm otto 500 chain hoist - home - molpass · the special “x-drive” chain nut ensures smooth...

ASM Otto 500 Chain hoist

ASM Steuerungstechnik GmbH Otto-Lilienthal-Strasse 14 - 33181 Bad Wünnenberg-Haaren Tel.: +49 (0) 2957 9909-100 - Fax: +49(0) 2957 9909-120

eMail: [email protected] www.asm-steuerungstechnik.de

Characteristics The ASM OttO 500 is specially designed for touring and event rigging. It has a 500 kg load carrying capacity and a speed of 4 m/min. The ASM OttO 500 is designed and tested to comply with the requirements of German safety regulation BGV C1 for use in public venues and theatres. The combination of a dynamically irreversible worm gear and an integral patented safety catch system within the gearbox has been approved by the German Technical Control Institute (TÜV) for operation without conventional brakes. The elimination of brakes greatly reduces maintenance requirements and permits a smooth deceleration of the load, even under emergency stop conditions. The special “x-drive” chain nut ensures smooth running of the chain, virtually eliminating the chain “bounce” associated with conventional square chain nuts. The ASM OttO 500 can be easily converted from normal to self climbing operation. The design of the casing makes for easy handling of the hoist. The ASM OttO 500 can be controlled from any conventional 3 phase reversing system. technology

Features:

• Smooth running • Silent • Special ASM irreversible worm gear – no brakes therefore low maintenance • Worm gear safety catch approved by TÜV (German technical control institution) • Smooth deceleration of the load even in an emergency stop situation e.g. Power failure • X-Drive chain nut for maximum smooth operation • Integrated operating end and emergency stop switches • Overload switch off • Under load switch off optional • Easy conversion to self climbing operation • Optimal handling due to 4 handles • Compact dimensions • Hook load attachment

ASM Otto 500 Chain hoist



Technical Data Load carrying capacity: 500 kg Speed: 4 m/min Weight: approx. 28 kg without chain Technical drawing

ASM Otto 1000 Chain hoist BGV C1



Characteristics The ASM OttO 1000 is specially designed for touring and event rigging. It has a 1000 kg load carrying capacity and a speed of 4 m/min. The ASM OttO 1000 is designed and tested to comply with the requirements of German safety regulation BGV C1 for use in public venues and theatres. The combination of a dynamically irreversible worm gear and an integral patented safety catch system within the gearbox has been approved by the German Technical Control Institute (TÜV) for operation without conventional brakes. The elimination of brakes greatly reduces maintenance requirements and permits a smooth deceleration of the load, even under emergency stop conditions. The special “x-drive” chain nut ensures smooth running of the chain, virtually eliminating the chain “bounce” associated with conventional square chain nuts. The ASM OttO 1000 can be easily converted from normal to self climbing operation. The design of the casing makes for easy handling of the hoist. The ASM OttO 1000 can be controlled from any conventional 3 phase reversing system. technology

Principle characteristics:

• Smooth running • Silent • Special ASM irreversible worm gear – no brakes therefore low maintenance • Worm gear safety catch approved by TÜV (German technical control institution) • Smooth deceleration of the load even in an emergency stop situation e.g. Power

failure • X-Drive chain nut for maximum smooth operation • Integrated operating end and emergency stop switches • Overload switch off • Under load switch off optional • Easy conversion to self climbing operation • Optimal handling due to 4 grab handles • Compact dimensions • Hook load attachment

ASM Otto 1000 Chain hoist BGV C1



Technical Data Load carrying capacity: 1000 kg Speed: 4 m/min Weight: 53kg (without chain) Technical drawing:

ASM BGV C1 Chain Point Hoist UNO 500

ASM Steuerungstechnik GmbH Otto-Lilienthal-Strasse 14 - 33181 Bad Wünnenberg Haaren / Germany

Tel.: +49 (0) 2957 9909-100 - Fax: +49(0) 2957 9909-120 eMail: [email protected]

www.asm-steuerungstechnik.de

CHARACTERISTICS The UNO 500 is the ultimate high tech chain point hoist for lifting of loads of up to 500 kg. The UNO 500 meets the requirements of the BGV C1 (German safety regulation) and it is the universal product to be used in arenas, studios, theatres, multi-purpose halls, on stages, and for any other professional application with specific safety requirements. The operational feature of the UNO 500 even makes very complex scenic movements possible CLASSIFICATION ACCORDING TO BGV C1 Asynchronous group drive controlled by ASM GENESIS LC 8 Rigg. The chain hoist is equipped with over load switches, and a limit switch. Control of the hoist takes place via the changing of the rotating field (phase change) of the power supply. Asynchronous group drive with group Stop controlled by ASM GENESIS LC 8 AG. The chain hoist is equipped with DMS load sensor, limit switch, relay control and the GENESIS PC 16 axis card. Asynchronous group drive with Group stop and monitoring of the position deviation controlled by ASM GENESIS LC 8 AG. The chain hoist is equipped with DMS load sensor, limit switch, relay control, incremental encoder and the GENESIS PC 16 axis card. Synchronous group drive controlled by ASM GENESIS LC 8 SG. Equipped with an absolute encoder, frequency inverter, and the GENESIS PC 16 axis card. Meets the requirements of SIL 3. The outstanding characteristics

• Smooth running • Silent • Special ASM worm gear – no brakes therefore low maintenance • Worm gear safety catch approved by TÜV (German technical control institution) • Smooth deceleration of the load • Robust housing made of special synthetic material for rough road operations (has

handgrips all round) • Adaptable for individual applications • Hook load attachment by means of tear proof, tested lifting eye

ASM BGV C1 Chain Point Hoist UNO 500

ASM Steuerungstechnik GmbH Otto-Lilienthal-Strasse 14 - 33181 Bad Wünnenberg Haaren / Germany



TECHNICAL DATA Dimensions 292 x 495 x 360 mm Weight (without chain) 48 kg Speed 8 m/min Motor performance 1, 5 kW Load carrying capacity 500kg Technical Drawing

ASM BGV C1 Chain hoist UNO 500HS

ASM Steuerungstechnik GmbH Otto-Lilienthal-Strasse 14 - 33181 Bad Wünnenberg Haaren Tel.: +49 (0) 2957 9909-100 - Fax: +49(0) 2957 9909-120


Features and Specifications UNO 500HS – the High-Tech Chain Hoist for the lifting of loads up to 500 kg. The UNO 500 meets the requirements of the BGV C1 and it is the universal product that is used in arenas, studios, theatres, multipurpose halls, on stages and in any other professional applications with specific safety requirements. The use of the Servo drive allows a high performance of 0,6 m/sec of travel speed with precise and compact measurement. The high torque of servo motor allows by low revolution speed a high duty cycle even at very low speed. This chain hoist is equipped with gearbox with worm gear safety catch. Moreover an extra silent theatre double brake is used. The supply of the hoist is carried out by an external 19” Power Pack, where the power electronics and control is situated. The chain hoist is equipped with load and position measurement, which enable synchronous group drive. ASM GENESIS Control of the UNO 500HS enables complex scenic movements. CLASSIFICATION ACCORDING TO BGV C1 Genesis GSG Computer control for synchronous group drive with group stop, SIL 3 Outstanding Characteristics:

• Low noise level and smooth running • High speed and exact positioning • High duty cycle even at very low speed • Special ASM gear-box with worm gear safety catch approved by TÜV (German

Technical Control Institution) • Silent theatre double brake • Robust housing made of special synthetic material for rough road operations (has

handles all round ) • Adaptable for individual applications • Load attachment by means of hook

ASM BGV C1 Chain hoist UNO 500HS



Technical Data: Dimensions: 261 x 490 x 380 mm (see Drawing) Weight (without chain): 48 kg Speed: 0,3 - 36 m/min Motor power: 5 kW Load carrying capacity: 500 kg Drawing Technical subject to change without prior notice

ASM RIG-MASTER 500/1000

ASM Steuerungstechnik GmbH Otto-Lilienthal-Strasse 14 - 33181 Bad Wünnenberg-Haaren Tel.: +49 (0) 2957 9909-100 - Fax: +49 (0) 2957 9909-120

e-mail: [email protected] www.asm-steuerungstechnik.de

Product information

Equipment:

• It is possible to switch between 500 kg BGV C1

and 1000 kg BGV D8 operation • Speed 4 m/min • Textile chain bag • Hook with swivel • Finely adjustable 4-track gearbox - limit switch • Overload switch off (DMS system) • Overtemperature switch off (motor and gearbox) • Dynamic irreversible worm gear for smooth

running and barking • 5-pocket chain wheel • Can be activated by means of any phase inverter

controller with a CEE 16A 4 pole plug (B1 and B2 versions)

• Optional: 24V contactor-controller (B3 version) or frequency inverter (B4 version)

• Climbing operation without additional equipment possible • Two-string operation possible • Load measurement system already integrated • Suitable for outdoor use • Modular slinging system (eyelets / hooks)

Product features:

• Chain hoist fulfils the requirements of BGV C1 and DIN 56950 • Presence of persons below the load is permitted even during movement • Specially for assembly and dismantling, without time-consuming "deadweight

suspension" of the load • Dynamic irreversible worm gear, prevents, in keeping with DIN 56950,

overspeed and unexpected moves of the load as well as sagging in case of overload

• Almost maintenance-free system, there neither brakes nor a safety clutch are required.

• Jerk-free starting and stopping of the load thanks to a patented gear system • Highest safety level through TÜV-approved worm gear safety catch • Extremely silent running makes use in the theatre possible • Operation by means of 3-phase control (common commercial D 8 controller)




• Integrated hoist electronics takes over safety monitoring in accordance with BGV C1

• Underload switch off can be optionally activated • Modification from normal operation to climbing operation with just a few hand

operations • Covering hood of extremely robust rubber-like plastic • Possible control equipment: B1, B2, B3, B4




Technical Data:

BGV C1 operation BGV D8 operation Carrying capacity 1 string 500 kg 1000 kg Carrying capacity 2 string 1000 kg 2000 kg Speed 1 string 4 m/min 4 m/min Speed 2- string 2m/min 2m/min Self-weight about 38 kg without chain about 38 kg without chain

Drawing: (handle / chain container for 24 mm stroke)

Distributed by Hall Stage Limited, Unit 4, Cosgrove Way, Luton, Beds. LU1 1XL, UK. Tel:+44(0)845 345 4255 fax:+44(0)845 345 4256

e: [email protected]

P 300 JR Characteristics The P 300 JR is a steel band point hoist especially designed for application on stages, in halls and studios. It operates with two steel bands and meets all the safety standards for the use in meeting venues and theatres according to BGV C1 (German safety regulation). The dynamic irreversible worm gear with an integrated patented safety catch, approved by TÜV (German technical control institution), allows operation without maintenance intensive brakes and ensures a smooth deceleration of the load even in case of an emergency stop. If the P 300 JR is equipped with an ASM GENESIS control then quick and complex movements are possible. The employment of steel bands as a carrier guarantees an extremely smooth and steady run and an exact position every time, also after the changing of loads and a long operating time. CLASSIFICATION ACCORDING TO BGV C1 Asynchronous group drive with group Stop and 24V DC Control The point hoist is equipped with an over load off switch, limit switch, relay and 24 V Electronic Control Asynchronous group drive with group Stop, controlled by ASM Genesis LC 8 AG The point hoist is equipped with a DMS load sensor, limit switch, relay control and the GENESIS PC 16 axis card. Synchronous group drive controlled by ASM Genesis LC 8 SG Equipped with an absolute encoder, frequency inverter, and the GENESIS PC 16 axis card. Way synchronised drive, time synchronised drive with predetermined speed control Outstanding characteristics: - Innovative steel carrying bands free of any process wear and tear - Smooth running - Silent - Special ASM irreversible worm gear – no brakes therefore low maintenance - Worm gear safety catch approved by TÜV (German technical control institution) - Smooth deceleration of the load - Integrated control components - Self climbing operation possible - Artist flying possible - Horizontal, vertical and diagonal movements of loads permitted - Various extension opportunities for individual applications - Hook load attachment by means of tear proof tested lifting eye

w: http://www.hallstage.com/ Page 4



Areas of Application • Stages, multi-purpose halls and studios • For the set up and movement of scenes Technical Data Dimensions (HxWxD) Chassis 490 x 390 x 337 mm Operational 840 x 390 x 337 mm Weight 52 kg Standard lifting 12 m ((can be extended to 20 m max then the load carrying

capacity is reduced to 250 kg) Motor performance 0,7 kW Load Carrying capacity 300 kg Speed 0-6 m/min Suspension method Steel band 30 x 0,4 mm Voltage supply: 1 Ph MP + PE 240 V or 3 Ph MP + PE 400 V Noise level: < 42 dBA Control circuit voltage: 24 V Standard EG-Guideline: EG-Maschinenrichtlinie 89/392/EWG EG-Niederspannungsrichtlinie 73/23/EWG, geändert durch RL 93/68/EWG Applied standards: DIN VDE 0100 DIN VDE 0100-410

DIN VDE 0116 DIN VDE 0801 DIN VDE 0801-A1

DIN EN 418 DIN EN 60204-1 DIN V 1920 DIN V 19250 DIN V 19251 DIN 56925 National regulation : VBG 1 BGV C 1




Technical Drawing

Operating end top Hook load attachment: lifting eye

Hanging point, eyelet

w: http://www.hallstage.com/

Grip

Page 6



P 250 JR Characteristics The P 250 JR is a steel band point hoist especially designed for application on stages, in halls and studios. It operates with two steel bands and meets all the safety standards BGV C1 (German Safety regulation) for use in meeting venues and theatres. The dynamic irreversible worm gear with an integrated patented safety catch, approved by TÜV (German technical control institution), allows operation without the use of maintenance intensive brakes and ensures a smooth deceleration of the load even in case of an emergency stop. If the P 250 JR is equipped with an ASM GENESIS control then quick and complex movements are possible. The use of steel bands as a carrier guarantees extremely smooth and steady operation and an exact positioning every time, even after changing of loads and extensive operation CLASSIFICATION ACCORDING TO BGV C1 Asynchronous group drive with group Stop and 24V DC Control The point hoist is equipped with an over load switch, limit switch, frequency inverter and 24 V Electronic Control Asynchronous group drive with group Stop, controlled by ASM Genesis LC 8 AG The point hoist is equipped with a DMS load sensor, limit switch, frequency inverter and the GENESIS PC 16 axis card. Synchronous group drive controlled by ASM Genesis LC 8 SG Equipped with an absolute encoder, frequency inverter, and the GENESIS PC 16 axis card. Position synchronised drive, time synchronised drive with predetermined speed control Outstanding characteristics:

- Innovative steel carrying bands free of any process wear and tear - Smooth running - Silent - Special ASM irreversible worm gear – no brakes therefore low maintenance - Worm gear safety catch approved by TÜV (German technical control institution) - Smooth deceleration of the load - Integrated control components - Self climbing operation possible - Artist flying possible - Horizontal, vertical and diagonal movements of loads permitted - Frequency inverter - Adaptable for individual applications - Hook load attachment by means of tear proof, tested lifting eye




Areas of Application - Stages, multi-purpose halls and studios - For the set up and movement of scenes Technical Data Dimensions (HxWxD) chassis 490 x 390 x 337 mm Operational 840 x 380 x 337 mm Weight 52 kg Standard lifting 12 m (can be extended to 20 m max then the load carrying

capacity is reduced to 200 kg) Motor performance 1, 5 kW Load Carrying capacity 250kg Speed 0-15 m/min Suspension method Steel band 30 x 0, 4 mm Voltage supply: 1 Ph MP + PE 240 V or 3 Ph MP + PE 400 V Noise level: < 42 dBA Control circuit voltage: 24 V Standard EG-Guideline: EG-Maschinenrichtlinie 89/392/EWG EG-Niederspannungsrichtlinie 73/23/EWG, geändert durch RL 93/68/EWG Applied standards: DIN VDE 0100 DIN VDE 0100-410

DIN VDE 0116 DIN VDE 0801 DIN VDE 0801-A1

DIN EN 418 DIN EN 60204-1 DIN V 1920 DIN V 19250 DIN V 19251 DIN 56925 National regulation : VBG 1 BGV C 1




Technical Drawing

Operating end top Hook load attachment: lifting eye

Grip

Hanging point, eyelet


ASM Steel Band Point Hoist P 250 TH

ASM Steuerungstechnik GmbH Otto-Lilienthal-Strasse 14 - 33181 Bad Wünnenberg-Haaren / Germany



Characteristics The P 250 TH is a steel band point hoist especially designed for application on stages, in halls and studios. It operates using one steel band and is designed and tested to comply with the requirements of German safety regulation , BGV C1 for use in public venues and theatres. The innovative single point suspension system permits diagonal movement. The combination of a dynamically irreversible worm gear and an integral patented safety catch system within the gearbox has been approved by the German Technical Control Institute (TÜV) for operation without conventional brakes. The elimination of brakes greatly reduces maintenance requirements and permits a smooth deceleration of the load, even under emergency stop conditions. When connected to an ASM GENESIS Control system, complex, multiple movements can be programmed and executed quickly and easily. The use of steel bands as a load carrier guarantees a smooth, steady and quiet movement. The absence of stretch in the load carrier, compared with steel wire ropes, ensures consistent positioning of the load, regardless of length of service or load. CLASSIFICATION ACCORDING TO BGV C1 Asynchronous group drive with group Stop and 24V DC Control The point hoist is equipped with an overload switch, limit switch, frequency inverter and 24V electronic control Asynchronous group drive with group Stop , controlled by ASM Genesis LC 8 AG The point hoist is equipped with a DMS load sensor, limit switch, Frequency inverter and the GENESIS PC 16 axis card Synchronous group drive controlled by ASM Genesis LC 8 SG Equipped with an absolute encoder, frequency inverter, and the GENESIS PC 16 axis card. position synchronised drive, time synchronised drive with predetermined speed indicator The outstanding characteristics

• Innovative steel carrying band free of any process wear and tear • Smooth running • Silent • Special ASM irreversible worm gear – no brakes therefore low maintenance • Worm gear safety catch approved TÜV (German technical control institution) • Smooth deceleration of the load • Integrated control components • vertical and diagonal movements of loads permitted • Frequency inverter • Adaptable for individual applications • load attachment by means of tear proof, tested lifting eye

ASM Steel Band Point Hoist P 250 TH

ASM Steuerungstechnik GmbH Otto-Lilienthal-Strasse 14 - 33181 Bad Wünnenberg-Haaren / Germany



Technical Data Dimensions 440 x 438 x 405 mm Load Carrying capacity 250 kg Speed 0-12 m/min Standard travel 12 m Motor power 1,5 kW Technical Drawing

ASM Steel Band Point Hoist P 250TH Servo 1.2



Characteristics The P 250TH Servo 1.2 is a steel band point hoist specially designed for the lifting of loads up to 250 kg. Its travel is 20.m. This steel band point hoist operates with only one steel band and was designed for application on stages, in halls and studios. The single-point suspension and the well-balanced bearing of band point hoist within a shackle allow diagonal multi-direction movements. It meets all the safety requirements according to BGV C1 for use in public venues and theatres. The use of the Servo drive allows a high performance of 1.2 m/sec of travel speed with precise and compact measurement. The high torque of servo motor allows by low revolution speed a high duty cycle even at very low speed. The hoist is equipped with gearbox with worm gear safety catch. Moreover an extra silent theatre double brake is used. The supply of the hoist is carried out by an external 19” Power Pack, where the power electronics and control is situated. The hoist is equipped with load and position measurement, which enable synchronous group drive. Classification according to BGV C1 Genesis GSG Computer control for synchronous group drive with group stop, SIL 3 Features:

• Innovative and wear free steel bands • Low noise level and smooth running • High speed and exact positioning • High duty cycle even at very low speed • Special ASM gearbox with worm gear safety catch approved by TÜV (German

Technical Control Institution) • Silent theatre double brake • Angular movements of loads permitted • Servo amplifier • Load attachment by means of tear-proof eyelet

ASM Steel Band Point Hoist P 250TH Servo 1.2



Technical Data: Dimensions: ca. 658 x 453 x 618 mm (see drawing) Load carrying capacity: 250 kg Speed : 0,005-1,2 m/sec Travel: 20m Motor power: 5 kW Weight: ca.78 kg Drawing:

Technical subject to change without prior notice



SPC – Winch Characteristics The SPC Winch is a steel band hoist especially designed for the application on stages and in halls. Its special construction makes the installation in standard truss elements possible. The SPC winch is very suitable for mobile use e.g. fly loft, rigging loft, or for touring applications. It is powered by a servomotor which has an external 19-inch-powerpack with servo amplifier and a point hoist control system. The use of steel bands as a carrier leads to an extremely smooth and steady operation almost free of vibration. Exact positioning every time even after changing loads and operation is guaranteed. Extremely fast scenic movements are made possible.

Mobile SPC-Winch for grid use.

Installation in standard truss elements

CLASSIFICATION ACCORDING TO BGV C1 Synchronous group drive controlled Equipped with an absolute encoder, frequency inverter, position synchronised drive, time synchronised drive and speed control Control options - Basic: Direct control with programmable accurate limit switch - Optional: Equipped with ASM GENESIS control for synchronised group drive - Optional: Equipped with ASM STAGE CONTROL PRO for complex movements




Outstanding characteristics - 24 Bit absolute encoder SSI and sinus-cosims-encoder already in standard design - Innovative steel band free of any process wear and tear - Silent running - High speed and exact positioning - Programmable positioning without computer control - Quiet double brake developed for theatre use - Diagonal movements of loads in every direction possible (45° max) - Adaptable for individual applications - Load attachment by means of tear proof, tested lifting eye Areas of application of the mobile SPC hoist The mobile SPC hoists can be positioned on the grid directly over the drop positions. They are connected with the 19-inch SPC hoists Power Packs.

19“ Rack with 4 x SPC 19“ PowerPack

Multicore cable to winch




Technical data Dimensions 520 x 520 x 1000 mm Weight approx. 95 kg Power consumption 7 kW max. Hoisting distance 30 m Hoisting speed 0 – 1, 2 m/s Operating factor 75 % max. Noise approx <50 dBA Power Pack - Axis card - Servo amplifier - Emergency stop-Management - Service unit Technical Drawing




Lighting Hoists




LT 250 and LT 400 Characteristics LT 250 and LT 400 is the ultimate ASM lamp hoist carrier for universal professional use. The particularly high load carrying capacity of the lamp hoist and the fact that they can be constructed in various sizes enables complete studio coverage with only a few units. The use of steel bands as a carrier leads to an extremely smooth and steady operation, which is almost free of vibration and guarantees accurate positioning every time. The lamp hoist can be adapted to special local requirements and applications (e.g. equipment with cantilevers and ladders.). In addition, the lamp hoist can be equipped with DMS load sensors and appropriate evaluation equipment. The outstanding characteristics of the lamp hoists LT 250 and LT 400 - Patented steel band system: silent running - High speed and accurate positioning - Protected ASM energy supply chain system - Individual design of the load-carrying cross

beam - Quick and easy installation of pre-assembled

equipment. - Adaptable for individual applications Technical data Load-carrying capacity 250 kg or 400 kg respectively at the load bar, evenly

distributed Hoisting speed up to 5,4 m/min Hoisting distance 20m max. Motor performance 0.75 or 1.5 kW




Technical data LT 250 Load-carrying capacity: up to 250 kg at the load bar evenly distributed Hoisting speed: 5,4 m/min Hoisting distance: 12 m (20 m max.) Motor performance: 0.75 kW




Technical data LT 400 Load-carrying capacity: up to 400 kg at the load bar evenly distributed Hoisting speed: 5,4 m/min Hoisting distance: 12 m (20 m max.) Motor performance: 1.5 kW


DistrUnit 4, CosgrTel:+44(0)845

e: sales@hallsta

LMH Hoists

LMH 200 250 Kg on band - 15 m/min - 6 m Travel (12m version, 20 m version

available on request) - Load bar – up to 12m - Cable management - DMS - Limit switch - Dynamic irreversible worm gear with

safety catch - Hand winch - Thermal protection Control: With Frequency inverter, 3 Phase and DMS load sensor Band Size:30 x 0,4 band: safety factor 15:1

ibuted by Hall Stage Limited, ove Way, Luton, Beds. LU1 1XL, UK. 345 4255 fax:+44(0)845 345 4256

ge.com

LMH 250 300 Kg on band, 250kg on the bar

- 5.6 m/min - 6 m Travel (12m and 20m version

available on request) - Load bar – up to 12m - Cable management - DMS - Limit switch - Dynamic irreversible worm gear

with safety catch - Hand winch - Thermal protection

Control options

A. With 24 V control and DMS load sensorB.

B. With Frequency inverter, 3 Phase and

DMS load sensor Band Size: 30 x 0,4 band: safety factor 12:1


LMH 700 Servo 650 kg at load bar - 8m travel - 0.9m/second travel speed – variable - twin bands & 4 pick up points on bar

(45mm x 0.4mm) - BGV C1 on worm gear gearbox - Double brakes - DMS load sensor – variable over & under

load monitoring - Limit switches for absolute deads - Genesis Axis card - Inc load bar ladder beam Optional band size: 30 x 0,4 band: safety factor 7.5:1 45 x 0,4 band: safety factor 11:1

LMH 400 500 Kg on band - 5,6 m/min - 6 m Travel (12m and 20m version

available on request) - Load bar 2,6 m – 12m - Cable management option - DMS card option - Limit switch - Dynamic irreversible worm gear with

safety catch - Hand winch - Thermal protection Control options A. With 24 V control and DMS load sensor B. With Frequency inverter, 3 Phase and DMS load sensor



4-Point LMH Projector Hoist




PR 300 and PR 500 Characteristics ASM flying bar systems PR 300 and PR 500 – the ultimate innovation in modern theatre architecture. The modular construction of the system as a whole guarantees the highest flexibility possible for the planning of your theatre and a design according to individual specifications. The frames of the flying bar system are constructed of an aluminium lattice girder system with integrated deflection sheaves machine frames, guiding devices etc. Transverse forces are fully compensated, only tracking forces are passed into the existing supporting framework of the theatre. The lattice girders of the flying bar system can be useful as the support structure for a grid floor. The drives remain accessible for maintenance purposes. The use of steel bands as a carrier leads to extremely smooth and steady operation, almost free of vibration. Exact positioning every time, even after the changing of the loads and extensive operation. The innovative flexible flying bar guarantees an even loading of the individual suspension points. The entire control system and sensor technology is safely integrated in the machine frame which has reduced vibration.

The outstanding characteristics of the flying bar systems PR 300 AND PR 500 - Patented steel band system : silent running - High speed and accurate positioning - Diagonal movement of loads in every direction possible - Construction with traversing elements as an under frame for a grid floor - No transmission of transverse forces into the static’s of the theatre - Fast and simple installation of pre-assembled components - Various extension opportunities for individual applications




Technical data PR 300 PR 500 Load carrying capacity 300 kg at the load bar 500 kg at the load bar Speed 0 – 1, 2 m/s 0 – 1, 2 m/s Operating factor 60 % 100 % Hoisting distance max 30 m max 40 m




Point hoist controls




GENESIS LC 8 Rigg Characteristics The GENESIS LC 8 Rigg control is a highly developed point hoist Control used for the operation of hoists with direct output control. The LC 8 Rigg housing accommodates the complete electronic supply network. The system compromises of 2 different components: GENESIS LC 8 Rigg Point hoist control Housed in a 19“ chassis, the LC 8 takes over the control of up to 8 individual point hoists. Several LC 8 Rigg Controls can be dlinked.

ecentrally

GENESIS RC 128 Hand held control The hand held control of the Genesis Concept allows a complete control which is as simple to operate as the LC8 Rigg and includes all its functions. Outstanding Characteristics - Ergonomic User guidance by mono chrome lighted LCD Touch Display capable of graphics - Management of different hoist types (various different hoist types) - Operational with one or two speeds - Setting of direction of rotation per Software - Linking more than one control with complex access possibilities - Group management and Group drive - Release drive - Complete control even with Hand control - Asynchronous Group drive without group stop.




GENESIS LC 8 AG / SG Characteristics The GENESIS Control is a highly developed point hoist controlled based on CAN-Bus. It fulfils the requirements of AK 5. The System is comprised of 3 components.

GENESIS LC 8 Point hoist control

Housed in a 19“ chassis, the LC 8 takes over the control of up to 8 individual point hoists. Several LC 8 control can be decentrally linked.

GENESIS RC 128 Hand held control The Hand held control of the GENESIS concept allows complete control which is as comfortable to operate as the LC 8 and includes all its functions.

GENESIS PC 16

The PC 16 is an intelligent high performance electronic control that is specially designed to be used for Point hoists.

Classification according to BGV C 1

Depending upon the point hoist configuration the following modes of operation are available: 1. asynchronous Group drive 2. Asynchronous Group drive with position deviation surveillance / monitoring 3. Synchronous drive and speed predetermination 4. Automatic drives: Scenery, pictures, time synchronised drive, position synchronised drive 5. Pre programmed function for trade fairs, shop windows, presentations 6. DMX 512-Communication for the call up of scenes and pictures from a light Controller.

(Clearance emergency Stop operation equipment or a RC 128 must be used) The GENESIS Control fulfils all requirements of AK 5. Software AG: Asynchronous Group Drive Software SG: Synchronous Group Drive




Technical Drawing GENESIS LC 8

GENESIS PC 16

GENESIS RC 128




STAR DISTRIBUTOR Each star distributor supplies, via a fibre optic cable, up to 8 axis cards which convert the control signals on the axes and the registered axis parameter (position registration, over, under load, emergency and operation end etc.). AXIS CARD The universal axis cards of the ASM LWL 1200 series are used in the control of ASM Steuerungstechnik manufactured point hoists as well as the control of many other machinery used in the stage area. The axis cards are linked to various independent building groups that monitor each other to ensure an undisturbed function. In case of an error, the axis cards will independently of each other, switch off. Operation end, over load, under load and slack band sensors are directly switched over to the UP and DOWN release cable. This means that the switches operate completely independently of the lead (main) computer or the CPU on the axis control. The security control is laid out independently from the CPU independent building group. The emergency end, hand crank, the monitoring switch, thermo switch and EMERGENCY STOP switch belong to the group. HYBRID CABLE The ASM hybrid cable has 2 fibre optic, 1 CAN, 8 control leads and 5 cables for voltage supply. The individual components (computer, star distributor and axis card) are connected by ring fibre optic cables. The fibre optic signal is converted into an electrical signal within the component. This enables a star shaped distribution of the data. ABSOLUTE ENCODER

e direct signals onto the fibre The absolute encoders givoptic network for way registration.




OPERATIONAL AREAS Operation with complex control registration and high demands for precision and safety (e.g. theatres, stages and studios). Technical Data Control demand class according to equipment, up to class 5 Control computer min P233 32 MB RAM Hard drive, floppy Soundcard (optional) MIDI SMPTE – Time code Interface ASM LWL 1200 Axis card Current supply +24 V DC Measurements (L x W x H) 320 x 100 x 40 mm Input digital 24bit absolute encoder security control OK Overload OK Under load OK 2 x slack band sensors 1 x reset switch 1 x incremental encoder IN 4 x free connecting points 24 V

Input analogue 8 x free connecting points analogue in 0–10 V (opt. 4-20mA)

Output digital Release 24 V Up 24 V Down 24 V 4 x free connecting points 24 V Output analogue 1 x analogue 0 - 10 V for FU Absolute encoders for position registration direct onto the LWL network


asm otto 500 chain hoist - home - molpass · the special “x-drive” chain nut ensures smooth...

Documents